plasterboard - whole of housewholeofhouse.bunnings.com.au/pdf/lock_up_plaster_vic_sa_final_3… ·...
TRANSCRIPT
PlasterboardVIC & SA
The Offer
Full Plasterboard Product Range
- Residential
Interior Walls
Interior Ceilings
Wet Areas
Accoustic
Contoured applications
- Commercial
Interior Walls and Ceilings
Wet Areas
High Impact
Accoustic applications and partitions
Fire rated
Other internal linings
Contoured applications
Perforated
Ceiling tiles
- Ancillary Products
- Plan Take-Off ServicePlease note Bunnings Warehouses stock
CSR Gyprock
Interior Walls
- 10mm and 13mm thickness
- Various board sizes available
- Not applicable for use where fire, acoustic or
moisture resistant properties are required
CD Plasterboard- Available in both RE (recessed edge) or RE/SE
(recessed edge/square edge)
- Board weight approx 6.5kg/m2 (10mm)
- Board weight approx 8.5kg/m2 (13mm)
Plasterboard- Available in both RE (recessed edge) or RE/SE
(recessed edge/square edge)
- Board weight approx 6.8kg/m2 (10mm)
- Board weight approx 8.8kg/m2 (13mm)
Residential Applications
Interior Ceilings
- 10mm thickness
- Reinforced
- Not applicable for use where fire, acoustic or
moisture resistant properties are required
Supaceil
- 600mm batten centres
- Greater strength
- Lighter weight
- Board weight approx 7.1kg/m2
Ceilingboard
- 600mm batten centres
- Reinforced
- Board weight approx 7.1kg/m2
Residential Applications
Wet Areas
- 10mm thickness
- For use in all wet areas including Kitchens,
Bathrooms and Laundries
Aquachek
- Can be installed on both walls and ceilings
- Ceiling applications include walkways and
verandahs
- Board weight approx 8.0kg/m2 (10mm)
Wet Area Board
- Light blue fungal resistant facing
- Low absorption core
- Recessed edges
- Board weight approx 7.8kg/m2
Residential Applications
Acoustic
- 10mm and 13mm thickness
- Where acoustic performance is required such as
theatre rooms, adjoining walls and high traffic
areas
Soundchek- High density
- Recessed edge
- Wall and ceiling application
- Board weight approx 9.3kg/m2 (10mm)
- Board weight approx 13.0kg/m2 (13mm)
Sound Board- High density
- Similar handling and installation to standard
plasterboard
- Board weight approx 8.6kg/m2 (10mm)
- Board weight approx 11.4kg/m2 (13mm)
Residential Applications
Contoured Application
- 6.5mm thickness
- 1200x3600mm sheet size
- Enables construction of contoured walls and
ceilings
- Board weight approx 4.2kg/m2
Flexible Plasterboard
- Installed in two layers
- Bend to 250mm radius (convex)
- Bend to 450mm radius (concave)
Curve Board
- Fixed to timber or cold formed steel (CFS) or
masonry
- Allows bending to a small radii
Residential Applications
Interior Walls & Ceilings
- 10mm and 13mm thickness
- Various board sizes available
- Not applicable for use where fire, acoustic or
moisture resistant properties are required
CD Plasterboard
- Available in RE (recessed edge) 10mm/13mm,
RE/SE (recessed edge/square edge) 10mm, SE
(square edge) 10mm/13mm
- Edging assists in creating smooth joins along
with attaching skirting boards
Plasterboard
- 13mm thickness
- 450mm and 600mm batten centres
Commercial Applications
Wet Areas
- 10mm and 13mm thickness
- For use in all wet areas including Kitchens,
Bathrooms and Laundries
Aquachek
- 10mm and 13mm thickness
- Can be installed on both walls and ceilings
- Ceiling applications include walkways and
verandahs
Wet Area Board
- 13mm thickness
- Light blue fungal resistant facing
- Low absorption core
Commercial Applications
High Impact
- 13mm thickness
- For use in high traffic areas where impact
resistance is required
Impact chek
- Suitable for fire rated applications and where
acoustic separation is required
- High strength
Impact Board
- 13mm thickness
- High Density
- Fibreglass mesh embedded into the core of the
board
Commercial Applications
Acoustic Application and
Partitions
- 10mm and 13mm thickness
- Where acoustic performance is required such as
theatre rooms, adjoining walls and high traffic
areas
Soundchek
- High density
- Recessed edge
- Wall and ceiling application
Sound Board
- High density
- Similar handling and installation to standard
plasterboard
Commercial Applications
Wet Area Fire Rated
- 13mm and 16mm thickness
Fyrchek MR
- 13mm and 16mm thickness
- Increased moisture resistance
- Wall and ceiling application
Wet Area Fireboard
- 16mm thickness
Commercial Applications
Contoured Application
- 6.5mm thickness
- 1200x3600mm sheet size
- Enables construction of contoured walls and
ceilings
Flexible Plasterboard
- Installed in two layers
- Bend to 250mm radius (convex)
- Bend to 450mm radius (concave)
Curve Board
- Fixed to timber or cold formed steel (CFS) or
masonry
- Allows bending to a small radii
Commercial Applications
Other Internal Linings
Shaft Liner
- Non load-bearing, fire resistant wall assemblies
designed to enclose lift shafts, stairwells and service
ducting
- 25mm thickness
Moisture Resistant Flame Board
- Ideal for splash backs and behind cook tops
- 10mm thickness
- Does not have FRL rating
- Can also be used as a wet area liner
Commercial Applications
Perforated
- 13mm thickness
- 1200x3600mm
Perforated
- For use in ceilings where additional sound
absorption is required
- Long edges recessed to assist in producing a
smooth, even and continuous surface once jointed
- Perforations total 8.2% of sheet area
- Used in high traffic areas such as libraries and
shopping centres
Commercial Applications
Ceiling Tiles
- To suit exposed grid system 1200x600mm
- Square edged
Freshtone
- Vinyl faced
- Used in shopping centres, factories and office building
Supatone
- Paper faced
- Used in basic commercial ceilings (factories and
warehouses)
Perforated
- Vinyl faced
- Used when acoustic absorption is required such as
restaurants and galleries
Commercial Applications
Cornice
- Assorted lengths available
- Cove (55mm, 75mm, 90mm)
- Traditional concave profile
- Jazz (75mm)
- Distinctive 3 step geometric profile
- Concerto (90mm)
- Smooth curves and distinctive lines
- ShadowSet (105mm with 12mm recess)
- Clean geometric lines
- Tempo (90mm)
- Multiple shadow line
- Symphony (75mm)
- Strong shadow line with wave effect
- Classic (90mm)
- Subtle, contrasting line and shadow
Cove
ShadowSetConcerto
Symphony Classic
Tempo
Jazz
Ancillary Products
Cornice
- Assorted lengths available
- Cove (55mm, 75mm, 90mm)
- Traditional concave profile
- Esperance (75mm)
- Undulating curves
- Albany (95mm)
- Dramatic steps and bold curves
- Denmark (75mm)
- Symmetrical lines creating steps
Cove Esperance
Albany Denmark
Ancillary Products
Adhesives and Base Coats
- Adhesives
- Acrylic Stud Adhesive
- Drywall Masonry Adhesive
- Back Blocking Cement
- Masonry Adhesive
- Cornice Cement
- Cornice Cement 45
- Cornice Cement 60
- Base Coats
- Base Coat 45
- Base Coat 60
- Base Coat 90
- Wet Area Base Coat
Ancillary Products
Compounds
- Topping Compounds
- Total Coat-Lite Pre Mix
- Easy-finish
- Joint Master
- Multipurpose Compounds
- Total Joint Cement
- Easy-Flow
Ancillary Products
Compounds and Adhesives
- Base Coat
- Back Blocking Cement
- Cornice Cement
- Lightweight All-Purpose Compound
- Masonry Adhesive
- Multi-Purpose Joint Compound
- Stud Adhesive
- Top Coat
- Water Resistant Taping Cement
- Fibreglass Tape
Ancillary Products
The Process
Email or drop off building plan to Bunnings Rep
Specify requirements (ie. Product type)
Bill of quantities will be calculated by a
qualified quantity surveyor at BGC
A quote will be prepared by your
Bunnings Rep
Bunnings Rep will forward the completed quote within 72 hours of receipt for review by
Builder
Builder places order with Bunnings
BGC deliver direct to site as per agreed
date
- Specify products and email plan
- Bill of quantities provided
- Order Placed
- Delivery organised
- Traditional Hand Unload and Carry
- Specialist Crane Truck
- Delivery costs will be included in your quote
BGC Plan Take-Off, Quotes and Delivery
Sample Bill of Quantities
Crane truck upon
request
Technical Support
Website: www.gyprock.com.au
DesignLINK: is a service for architects and specifiers needing special assistance or custom solutions for wall and ceiling specifications. It also assists with specialised tools such as:
- Online system selector- Accoustic predictor- Green building calculator- Wall and Ceiling design wizards- CAD files- Specification templates
Website: www.designlink.com.auPhone: 1800 621 117
Technical Support
Website: www.bgc.com.au/plasterboard
Achieve Green Star Points with BGC PlasterboardIntroducing BGC’s GECA Certified Plasterboard Product Range
• At BGC we care about the environment and now have a range of GECA Certified Plasterboard Products available at no extra cost.
• BGC offers a range of tested Acoustic and Fire Rated systems incorporating our range of GECA Certified Plasterboard
• The Green Building Council of Australia (GBCA) has developed green star rating tools to asses the environmental impact of building design, construction and maintenance.
• These Tools reward GECA Certified Products.
Can we help?
Bunnings welcome the opportunity to quote your next job.
72 hour quote turn around
Please contact your local Bunnings representative or call 133 062.