Pla

ster

oc M

PR

Plasteroc MPR*

Prebagged high build multi purpose render

Uses

For application as either a high build internal or external crackresistant plaster.

Advantages

n Internal shrinkage control mechanism

n High build in single pass

n May be hand or machine applied

n Permits a high quality finish to be obtained

n Long life plastic packing

Description

Plasteroc MPR is a premixed sand/cement render which

incorporates blended cements, lime, graded sands,performance enhancing additives with shrinkage controlproducts.

Specification

Where shown on the contract documents, the plaster shallbe Plasteroc MPR supplied by Fosroc. The cured product

shall have drying shrinkage of

UAE/0362/00/C

Al Gurg Fosroc LLC

P. O. Box 657DubaiUnited Arab Emirates

TEL : (04) 285 8606FAX : (04) 285 9649

REGIONAL SALES OFFICES IN :

Important note

Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of sale, copies of which

may be obtained on request. Whilst Fosroc endeavours to ensure that the technical information on this data sheet is correct at the time of printing, it is the

customers responsibility to satisfy himself, by checking with the company that this information is still current at the time of use, that the product is suitable for

the intended application, and that the actual conditions of use are in accordance with those recommended. Because Fosroc has no control over the conditions of

use of its products, all recommendations or suggestions regarding the use of these products are made without guarantee.

ABU DHABI

Al Gurg Fosroc

TEL : 673 1779

FAX : 673 1449

BAHRAIN

YBA Kanoo

TEL : 738200

FAX : 732828

KUWAIT

Boodai

TEL : 481 7618

FAX : 483 2124

OMAN

GETCO

TEL : 771 5080

FAX : 771 7554

QATAR

Tadmur

TEL : 441 3628

FAX : 444 0812

DUBAI

Al Gurg Fosroc

TEL : 285 8787

FAX : 285 2023

www.fosrocgulf.com

* Denotes the trademark of Fosroc International Limited

Estimating

Supply

Plasteroc MPR : 20 kg bagRendercure : 1 litre pack

Yield

Plasteroc MPR : 13.5 litres per bagRendercure : 1 litre pack

Storage

12 months if stored in original unopened packs in a cool dry

environment with low humidity. Any change to therecommended storage conditions could reduce shelf life.

Precautions

Health and safety

Plasteroc MPR contains cementitious powders which, whenmixed with water or upon becoming damp, release alkalis

which can be harmful to the skin.

During use, avoid inhalation of the dust and contact with the

skin or eyes. Wear suitable protective clothing - eyeprotection, gloves and respiratory equipment (particularly inconfined spaces).

The use of barrier creams to provide additional skin protectionis also advised. In case of contact with the skin, rinse withplenty of clean water, then cleanse thoroughly with soap and

water.

In case of contact with eyes, rinse immediately with plenty ofclean water and seek medical advice. If swallowed seek

medical attention immediately - do not induce vomiting.

Fire

Plasteroc MPR is non-flammable and thus presents no firehazard.

For further information, please refer to the Product MaterialSafety Data Sheet for Plasteroc MPR.

Additional Information

Fosroc manufactures a wide range of complementary products

which include :

n waterproofing membranes & waterstops

n joint sealants & filler boards

n cementitious & epoxy grouts

n specialised flooring materials

Fosroc additionally offers a comprehensive package ofproducts specifically designed for the repair and

refurbishment of damaged concrete. Fosrocs SystematicApproach to concrete repair features the following :

n hand-placed repair mortars

n spray grade repair mortars

n fluid micro-concretes

n chemically resistant epoxy mortars

n anti-carbonation/anti-chloride protective coatings

n chemical and abrasion resistant coatings

For further information on any of the above, please consult

your local Fosroc office - as below.