plating system · plate calcaneal displacement osteotomy plate indications: the footmotion plating...

$: PLATING SYSTEM · plate Calcaneal displacement osteotomy plate Indications: The Footmotion Plating System is intended for arthrodeses, fractures and osteotomies fixation and revision$
FOOTMOTIONPLATING SYSTEM

Precontoured implants A complete range of plates for foot surgeons Transfixation technology Reliable compressive technology

INN O VAT I O N ME A N S M OT I O N


Cotton osteotomy plate

Calcaneal displacementosteotomy plate

Indications: The Footmotion Plating System is intended for arthrodeses, fractures and osteotomies fixation and revision surgeries of the foot in adults.

Contra-indications: • Serious vascular deterioration, bone devitalization,• Pregnancy.• Acute or chronic local or systemic infections.• Lack of musculo-cutaneous cover, severe vascular deficiency affecting the concerned area.• Insufficient bone quality preventing a good fixation of the implants into the bone,• Muscular deficit, neurological deficiency or behavioral disorders, which could submit the implant to abnormal mechanical strains.• Allergy to one of the materials used or sensitivity to foreign bodies.• Serious problems of non-compliance, mental or neurological disorders, failure to follow post-operative care recommendations.• Unstable physical and/or mental condition.

FO OT M OT I O N P L AT IN G SYST EM

EXAMPLE OF APPLICATIONS

Straight platesThe size of the

straight plate to be used is up to the

surgeon and depends on the indication.

Evans osteotomy plate

Dorso-medial Lapidus arthrodesis plate

Plantar Lapidus arthrodesis plate

Dorso-medial

Plantar Narrow

Plantar Standard

Plantar Lapidus arthrodesis plate - Narrow

FO OT M OT I O N P L AT IN G SYST EM

Opening base wedge osteotomy plate

Talo-naviculararthrodesis plate

Dorsal Lisfranc arthrodesis plate

Medial Lisfranc arthrodesis plate

With transfixation screw1st MTP arthrodesis plate

Without transfixation screw1st MTP arthrodesis plate -

Narrow plate

Revision1st MTP arthrodesis plate -

Revision plate

RANGE OF 1ST MTP ARTHRODESIS PLATES

RANGE OF LAPIDUS ARTHRODESIS PLATES

Isolated Lisfranc arthrodesis plate

Medio Plantar

Medio Plantar Lapidus arthrodesis plate


T ECHNI C A L FE AT UR ES

The design of these implants is the result of a proprietary state-of-the-art mapping technology to establish the maximum congruence between the plate and the bone.

Low profile implants1.4 to 1.7 mm

PRECONTOURED IMPLANTS

Features:- The screw head is stopped in the hole by its cap,

ensuring the locking,- The screw head is buried in the plate (a), - Plate and screws are all made of titanium.

Coaptation of both profiles during locking, limi-ting the cold welding risk and improving the re-moval properties.

SPECIFIC FIXATIONS FOR OPTIMIZED STABILITY OF THE ASSEMBLY

ANTICOLD WELDING SYSTEM

The ramp oblong hole allows a simple and controlled compression by the screw/plate interface.

Only Ø2.8 mm non-locking screws (RLT2.8Lxx) can be used for the ramp oblong holes.

Ramp oblong hole

Compression of the joint up to 1.5 mm

FIXATION AND SCREW FEATURES

• One type of hole for two screw diameters: Ø2.8 mm and Ø3.5 mm.

• Locking (SLT2.8Lxx and SLT3.5Lxx) and non locking screws (RLT2.8Lxx and RLT3.5Lxx) are avalaible for two diameters.

• The screw head is minimally invasive and buried in the plate (1) so as to limit the risk of soft tissue irritation.

• The hexalobular screw stamp impro-ves the torque transmission.

1

The threads under the screw head and inside the hole have strictly the same geometrical characteristics.

Screw head cap

Ø2.8 mm non locking screw (RLT2.8Lxx)

Ø3.5 mm non locking screw (RLT3.5Lxx)

Ø2.8 mm locking screw (SLT2.8Lxx)

Ø3.5 mm locking screw (SLT3.5Lxx)

(a)

Technical features:

(Examples of applications: hallux rigidus, severe hallux valgus, polyarthritis)

(Examples of applications: Hallux valgus, osteoarthritis, functional deformities)

PLATE FOR 1ST METATARSOPHALANGEAL ARTHRODESIS

PLATE FOR PLANTAR LAPIDUS ARTHRODESIS

Technical features:

Plantar positioning of the plate:• Minimizes conflicts with the extensor hallucis longus and tibialis anterior tendon,• Offers stable assembly and generate dynamic compression (see diagram

opposite),

The transfixation screw is inserted through the joint providing stability to the assembly,

Bendable sections,

The standard plantar lapidus plate exists with 3 offsets (3, 5 and 7 mm), to adapt variety of anatomical features,

3 types of plates and 2 types of surgical approach in order to adress different surgical philosophies.

Plantar narrow plate Dorso-medial plate Standard plantar plate

Plate with transfixation screw Plate without transfixation screw

Revision plate

Dynamic compression:

A CO MP R EHENSI V E R A N GE O F P L AT ES

Reaction force due to contact with the ground

1st Metatarsal boneMedial cuneiform bone

Transfixation screw

Hole for transfixation screw: The transfixation screw goes through the 1st MTP joint providing stability to the assembly.

NB : When using a plate without transfixation screw, an other screw can be inserted accross the plantar aspect of joint, outside of the plate.

Converging screws in the distal and proximal areas allow a stable fixation of the system.

1st MTP joint

Transfixation screw

Distal converging screws

Proximal converging screws



(Example of application: severe hallux valgus, flatfoot)

(Example of application: structural instability)

Technical features:

A wedge is integrated into the plate: the wedge size depends on the correction angle. 3 sizes are available: 3, 4 and 5 mm + 1 neutral plate,

Low profile plate, 1.4 mm thick,

Converging proximal screws offering stable fixation.

3-in-1 dedicated instrument: Distraction, compression and osteotomies.

Technical features:

Converging screws offering stable fixation,

10° cuneo-metatarsal sagittal angle,

10° intermetatarsal angle,

Optimized compression thanks to the slotted holes.

PLATE FOR OPENING BASE WEDGE OSTEOTOMY

PLATE FOR MEDIAL LISFRANC ARTHRODESIS

(Examples of applications: osteoarthritis, fractures, Lisfranc

joint dislocation, and fracture/dislocation after-effects)

Technical features:

2 possible constructs: C2-C3-M2-M3 or C3-cuboid-M3-M4 arthrodesis,

Complementary solutions for midfoot arthrodesis,

Cuneo-metatarsal sagittal angulation of 10°.

PLATE FOR DORSAL LISFRANC ARTHRODESIS

ANC642

PLATE FOR TALO-NAVICULAR ARTHRODESIS (Examples of applications: osteoarthritis, high-arched foot, equinovarus, flat feet, and traumatic after-

effects) Technical features:

Converging screws offering stable fixation,

Transfixation screw: inserted through the joint for a stable assembly,

Compression is achieved by the transfixation screw,

Right balance between the implant low profile and its strength: 1.7 mm thick,

Precontoured dorsal shape.


(Examples of applications: osteoarthritis, fractures, Lisfranc

joint dislocation, and fracture/dislocation after-effects)

Technical features:

2 possible constructs: C2-C3-M2-M3 or C3-cuboid-M3-M4 arthrodesis,

Complementary solutions for midfoot arthrodesis,

Cuneo-metatarsal sagittal angulation of 10°.

STRAIGHT PLATES FOR VARIOUS APPLICATIONS

The Footmotion Plating System set offers a complete range of compressive straight plates designed for treatments of fractures, osteotomies and fusions for small bones and bone fragments of the foot.

• From 2 to 7 holes (from 20 mm to 45 mm)• Controlled compression thanks to ramp oblong holes• Bendable plates for several construct s• 1.5 mm thick

(Example of application: Medial displacement calcaneal osteotomy, Lateral displacement calcaneal

osteotomy)

(Example of application: Lateral column lengthening, calcaneocuboid (cc) joint arthrodesis)

(Example of application: Plantar flexion osteotomy of the medial cuneiform)

ANC642

PLATE FOR CALCANEAL OSTEOTOMY

PLATE FOR EVANS OSTEOTOMY

PLATE FOR COTTON OSTEOTOMY

Technical features:

A central window allowing:- a better visualization of the osteotomy site,- a good vascularization for an optimized fusion.

A non locking central screw allowing the calcaneal shift without a specific instrumentation.

2 transfixation screws allowing :- the stability of the construct,- the compression between the two bones fragments,- the optimization of the anchorage with converging screws.

Technical features:

Precontoured plates: respecting the 1st cuneiform anatomy,

Converging screws allowing a stable fixation of the system,

2 types of plates : - plate with wedge for osteotomy,- plate without wedge for graft addition.


Technical features:

Precontoured plates: design respecting: - the calcaneal anatomy, - the calcaneo-cuboid joint.

Converging screws: a stable fixation of the system. 2 types of plates: - plate with wedge for osteotomy,- plate without wedge for graft addition and cc joint fusion.



IMP L A N TS R EFER EN CES

MEDIAL LISFRANC ARTHRODESES PLATES

Ref. Description Length

FETDD1 Medial Lisfranc Arthrodesis plate - Right - Size 1 53.4 mm

FETGD1 Medial Lisfranc Arthrodesis plate - Left - Size 1 53.4 mm

TALO-NAVICULAR ARTHRODESIS PLATES


FTTDD1 Talo-Navicular Arthrodesis plate - Right - Size 1 22.3 mm

FTTGD1 Talo-Navicular Arthrodesis plate - Left - Size 1 22.3 mm

FTTDD2 Talo-Navicular Arthrodesis plate - Right - Size 2 28.3 mm

FTTGD2 Talo-Navicular Arthrodesis plate - Left - Size 2 28.3 mm

1ST MTP ARTHRODESIS PLATES


FMTDD1 1st MTP Arthrodesis plate - Right - Size 1 36.4 mm

FMTGD1 1st MTP Arthrodesis plate - Left - Size 1 36.4 mm





1ST MTP ARTHRODESIS PLATES - NARROW


FMTDDN1 1st MTP Arthrodesis plate - Right - Narrow - Size 1 41.6 mm

FMTGDN1 1st MTP Arthrodesis plate - Left - Narrow - Size 1 41.6 mm



1ST MTP ARTHRODESIS REVISION PLATES






DORSAL LISFRANC ARTHRODESES PLATES

Ref. Description Width

FDTSDN1 Dorsal Lisfranc Arthrodesis plate - Narrow 19 mm

FDTSDS1 Dorsal Lisfranc Arthrodesis plate - Standard 22 mm

FDTSDW1 Dorsal Lisfranc Arthrodesis plate - Wide 25 mm

PLANTAR LAPIDUS ARTHRODESIS PLATES


FLTSV1 Plantar Lapidus Arthrodesis plate - Size 1 - 3 mm 44.6 mm



PLANTAR LAPIDUS ARTHRODESIS PLATES - NARROW


FLTDV0 Plantar Lapidus Arthrodesis plate - Right - Narrow - Size 0 37 mm

FLTGV0 Plantar Lapidus Arthrodesis plate - Left - Narrow - Size 0 37 mm

FLTDV1 Plantar Lapidus Arthrodesis plate - Right - Narrow - Size 1 41.8 mm

FLTGV1 Plantar Lapidus Arthrodesis plate - Left - Narrow - Size 1 41.8 mm

FLTDV2 Plantar Lapidus Arthrodesis plate - Right - Narrow - Size 2 49.8 mm

FLTGV2 Plantar Lapidus Arthrodesis plate - Left - Narrow - Size 2 49.8 mm

MEDIO-PLANTAR LAPIDUS ARTHRODESIS PLATES - NARROW


FLTDMV1 Medio plantar Lapidus Arthrodesis plate - Right - Narrow - Size 1 41.8 mm

FLTGMV1 Medio plantar Lapidus Arthrodesis plate - Left - Narrow - Size 1 41.8 mm

DORSO-MEDIAL LAPIDUS ARTHRODESIS PLATES


FLTSM1 Dorso-medial Lapidus Arthrodesis plate - Size 1 50 mm

OPENING WEDGE PLATES


FOTSM0 Opening wedge plate - 0 mm 28 mm





ISOLATED LISFRANC ARTHRODESIS PLATES


FUTDD1 Isolated Lisfranc plate - Right - Size 1 42.6 mm

FUTGD1 Isolated Lisfranc plate - Left - Size 1 42.6 mm

FUTSD1 Isolated Lisfranc plate - Size 1 37.7 mm



CALCANEAL DISPLACEMENT OSTEOTOMY PLATES


FATSL5 Calcaneal displacement osteotomy plate – 5 mm 21.5 mm

FATSL7.5 Calcaneal displacement osteotomy plate – 7.5 mm 21.5 mm

FATSL10 Calcaneal displacement osteotomy plate – 10 mm 21.5 mm

COTTON OSTEOTOMY PLATES

Ref. Description Width

FCTSM0 Cotton osteotomy plate – 0 mm 24 mm

FCTSM4.5 Cotton osteotomy plate – 4.5 mm 22 mm



EVANS OSTEOTOMY PLATES


FVTSL0 Evans osteotomy plate – 0 mm 30 mm




STRAIGHT PLATES


FUTS1 Straight plate - Size 1 - 2 holes 20 mm







LOCKING SCREWS*

Ref. Description

SLT2.8L10 Locking screw - Ø2.8 mm - L 10 mmSLT2.8L12 Locking screw - Ø2.8 mm - L 12 mmSLT2.8L14 Locking screw - Ø2.8 mm - L 14 mmSLT2.8L16 Locking screw - Ø2.8 mm - L 16 mmSLT2.8L18 Locking screw - Ø2.8 mm - L 18 mmSLT2.8L20 Locking screw - Ø2.8 mm - L 20 mmSLT2.8L22 Locking screw - Ø2.8 mm - L 22 mmSLT2.8L24 Locking screw - Ø2.8 mm - L 24 mmSLT2.8L26 Locking screw - Ø2.8 mm - L 26 mmSLT2.8L28 Locking screw - Ø2.8 mm - L 28 mmSLT2.8L30 Locking screw - Ø2.8 mm - L 30 mmSLT2.8L32 Locking screw - Ø2.8 mm - L 32 mmSLT2.8L34 Locking screw - Ø2.8 mm - L 34 mm

Ø2.8 MM SCREWS

Ø3.5 MM SCREWS

* Green anodized

LOCKING SCREWS*

Ref. Description

SLT3.5L10 Locking screw - Ø3.5 mm - L 10 mmSLT3.5L12 Locking screw - Ø3.5 mm - L 12 mmSLT3.5L14 Locking screw - Ø3.5 mm - L 14 mmSLT3.5L16 Locking screw - Ø3.5 mm - L 16 mmSLT3.5L18 Locking screw - Ø3.5 mm - L 18 mmSLT3.5L20 Locking screw - Ø3.5 mm - L 20 mmSLT3.5L22 Locking screw - Ø3.5 mm - L 22 mmSLT3.5L24 Locking screw - Ø3.5 mm - L 24 mmSLT3.5L26 Locking screw - Ø3.5 mm - L 26 mmSLT3.5L28 Locking screw - Ø3.5 mm - L 28 mmSLT3.5L30 Locking screw - Ø3.5 mm - L 30 mmSLT3.5L32 Locking screw - Ø3.5 mm - L 32 mmSLT3.5L34 Locking screw - Ø3.5 mm - L 34 mmSLT3.5L36 Locking screw - Ø3.5 mm - L 36 mmSLT3.5L38 Locking screw - Ø3.5 mm - L 38 mmSLT3.5L40 Locking screw - Ø3.5 mm - L 40 mm

* Blue anodized

LAG SCREWS*

Ref. Description

QLT3.5L20 Lag screw - Ø3.5 mm - L 20 mmQLT3.5L22 Lag screw - Ø3.5 mm - L 22 mmQLT3.5L24 Lag screw - Ø3.5 mm - L 24 mmQLT3.5L26 Lag screw - Ø3.5 mm - L 26 mmQLT3.5L28 Lag screw - Ø3.5 mm - L 28 mmQLT3.5L30 Lag screw - Ø3.5 mm - L 30 mmQLT3.5L32 Lag screw - Ø3.5 mm - L 32 mmQLT3.5L34 Lag screw - Ø3.5 mm - L 34 mmQLT3.5L36 Lag screw - Ø3.5 mm - L 36 mmQLT3.5L38 Lag screw - Ø3.5 mm - L 38 mmQLT3.5L40 Lag screw - Ø3.5 mm - L 40 mm

* Not anodized

NON LOCKING SCREWS*

Ref. Description

RLT2.8L10 Non locking screw - Ø2.8 mm - L 10 mmRLT2.8L12 Non locking screw - Ø2.8 mm - L 12 mmRLT2.8L14 Non locking screw - Ø2.8 mm - L 14 mmRLT2.8L16 Non locking screw - Ø2.8 mm - L 16 mmRLT2.8L18 Non locking screw - Ø2.8 mm - L 18 mmRLT2.8L20 Non locking screw - Ø2.8 mm - L 20 mmRLT2.8L22 Non locking screw - Ø2.8 mm - L 22 mmRLT2.8L24 Non locking screw - Ø2.8 mm - L 24 mmRLT2.8L26 Non locking screw - Ø2.8 mm - L 26 mmRLT2.8L28 Non locking screw - Ø2.8 mm - L 28 mmRLT2.8L30 Non locking screw - Ø2.8 mm - L 30 mmRLT2.8L32 Non locking screw - Ø2.8 mm - L 32 mmRLT2.8L34 Non locking screw - Ø2.8 mm - L 34 mm

* Golden anodized

NON LOCKING SCREWS*

Ref. Description

RLT3.5L10 Non locking screw - Ø3.5 mm - L 10 mmRLT3.5L12 Non locking screw - Ø3.5 mm - L 12 mmRLT3.5L14 Non locking screw - Ø3.5 mm - L 14 mmRLT3.5L16 Non locking screw - Ø3.5 mm - L 16 mmRLT3.5L18 Non locking screw - Ø3.5 mm - L 18 mmRLT3.5L20 Non locking screw - Ø3.5 mm - L 20 mmRLT3.5L22 Non locking screw - Ø3.5 mm - L 22 mmRLT3.5L24 Non locking screw - Ø3.5 mm - L 24 mmRLT3.5L26 Non locking screw - Ø3.5 mm - L 26 mmRLT3.5L28 Non locking screw - Ø3.5 mm - L 28 mmRLT3.5L30 Non locking screw - Ø3.5 mm - L 30 mmRLT3.5L32 Non locking screw - Ø3.5 mm - L 32 mmRLT3.5L34 Non locking screw - Ø3.5 mm - L 34 mmRLT3.5L36 Non locking screw - Ø3.5 mm - L 36 mmRLT3.5L38 Non locking screw - Ø3.5 mm - L 38 mmRLT3.5L40 Non locking screw - Ø3.5 mm - L 40 mm

* Fuchsia anodized

NEWCLIP TECHNICSPA de la Lande Saint Martin - 45 rue des Garottières44115 Haute Goulaine (France)Tél. : +33 (0)2 28 21 37 12 - Fax : +33 (0)2 40 63 68 [email protected] - www.newcliptechnics.com

Non

-con

tract

ual p

ictu

res

NEWCLIP USA642 Larkfield Center , Santa Rosa CA 95403, USAPhone : + 1 707 230 5078 [email protected] - www.newclipusa.com

Broc

hure

EN

- Fo

otm

otio

n Pl

atin

g Sy

stem

- Ed

6 - 0

7/20

18 -

Med

ical

dev

ice

EC :

clas

s IIb

- C

E012

0 SG

S U

K - U

S C

lass

: II -

Rea

d la

belin

g an

d in

stru

ctio

ns b

efor

e us

e.

INST R UMEN TS R EFER EN CES

FOOTMOTION PLATING SYSTEM INSTRUMENTS

Ref. Description Qty

ANC350 Ø4.5 mm AO quick coupling handle - Size 1 2

ANC567 Ø16 mm convex reamer 1

ANC568 Ø16 mm concave reamer 1







ANC575 T8 quick coupling screwdriver 2

ANC576 Ø2.0 mm threaded guide gauge for Ø2.8 mm screws 2

FOOTMOTION PLATING SYSTEM INSTRUMENTS

Ref. Description Qty

ANC577 Ø2.7 mm threaded guide gauge for Ø3.5 mm screws 2

ANC578 Bending plier 2

ANC586 Ø2.0 mm non threaded bent guide gauge for Ø2.8 mm screws 1

ANC589 Length gauge for Ø2.8 and Ø3.5 mm screws 1

ANC590 Ø2.0 mm quick coupling drill bit - L 125 mm 2



ANC642 Opening wedge osteotomy instrument 1

33.0212.070 Pin - Ø1.2 L70 mm 5

33.0216.100 Pin - Ø1.6 L100 mm 5

33.0216.150 Pin - Ø1.6 L150 mm 5

REMOVAL SET

If you have to remove FOOTMOTION PLATING SYSTEM implants, make sure to order the Newclip Technics removal set which includes the following instruments: - ANC350: Ø4.5 mm AO quick coupling handle - Size 1.- ANC575: T8 quick coupling screwdriver

IMPLANTS TRAY (+ Reamers)(ANC588/I)

BASE (ANC588/B)

ANC588/M3

ANC588/M6

ANC588/M7

ANC588/M8

ANC588/M2

ANC588/M1

ANC588/M4

ANC588/M5

RACK(ANC588/R)

Container Footmotion Plating System - Flatfoot (ANC756)

The information presented in this brochure is intended to demonstrate a NEWCLIP TECHNICS product. Always refer to the package insert, product label and/or user instructions before using any NEWCLIP TECHNICS product. Surgeons must always rely on their own clinical judgment when deciding which products and techniques to use with their patients. Products may not be available in all markets. Product availability is subject to the regulatory or medical practices that govern individual markets. Please contact your NEWCLIP TECHNICS representative if you have questions about the availability of NEWCLIP TECHNICS products in your area.

plating system · plate calcaneal displacement osteotomy plate indications: the footmotion plating...

Documents