plug and play, power on the go - solar-electric.com€¦ · ***most brands use 2-4 busbars, more...
TRANSCRIPT
AVAILABLE IN:
100W
The Xantrex Solar 100W and 160W portable kits feature solar panels with 5 busbars and PERC (Passivated Emitter and Rear Contact) mono-crystalline cells, a special cell technology that increases panel efficiency significantly over standard solar cells.
Both solar kits include a 10A charge controller and system hardware that is designed as a plug-n-play charging solution. Users have the ability to connect to their batteries using ring terminals, battery clamps, or an SAE connector for pre-wired RV solar ports. Adjustable tilting legs allow the user to orient their panels at the perfect angle towards the sun. These portable kits fold into an easy-to-store location and is ideal for applications where it may be impractical to have a permanently mounted solar panel.
PLUG AND PLAY, POWER ON THE GO
Copyright © 2019 Xantrex LLC. All Rights Reserved. All trademarks are owned by Xantrex LLC.
APPLICATIONS:5 YEARWARRANTY*
*WARRANTY ON PANEL CONSTRUCTION
www.xantrex.comCUSTOMER CARE: 1.800.670.0707
160W
BEST IN CLASS
18%MODULE EFFICIENCY* TECHNOLOGY
PERC**
*Xantrex 100W rigid panel specs and performance compared with 100W models of other popular brands**competitor panels do not currently use PERC technology
***Most brands use 2-4 busbars, more busbars means better efficiency & durability
COMPACTLIGHTWEIGHT
+**TECHNOLOGY
5 BUSBAR
PORTABLE KIT DATASHEET
Solar PanelThe Xantrex Solar 100W and 160W kits feature solar panels with 5 busbars and PERC (Passivated Emitter and Rear Contact) mono-crystalline cells, a special cell technology that increases module efficiency significantly over standard solar cells.
Charge ControllerA 10A Pulse-Width Modulation (PWM) charge controller is provided to charge and protect your batteries. Featuring an LCD screen, two USB ports, multi-stage battery charging algorithm, charging protections, and real-time system indicators.
Battery Connections
Three ways to connect to your battery using a SAE connector, battery rings or battery clamps.
Tilting Legs
Equipped with tilting legs to allow you to angle the solar module towards the sun and maximize solar energy harvesting.
CONTENTS
WHAT’S INCLUDEDXANTREX SOLAR PORTABLE KIT DATASHEET
100W & 160W XANTREX SOLAR PORTABLE KIT
RECOMMENDED POWER SOLUTIONS
FREEDOM XC INVERTER/CHARGER
FREEDOM SWINVERTER/CHARGER
COMPLETE YOUR ELECTRICAL SYSTEM
Carrying Case
A protective carrying case is provided to keep your solar charging kit free from any unnecessary scratches during storage.
CLOSED
TILTING LEGS
SOLAR PANEL 10A CHARGE CONTROLLER
SAE CONNECTOR
BATTERY RINGS
BATTERY CLAMPS
WAYS TO CONNECT:
ELECTRICAL DATAPANEL TYPE 100W 160W
Maximum power-Pmax (W) at STC* 100W (2 x 50W) 160W (2 x 80W)
Maximum power voltage-Vmp (V) 21.4 19.2
Maximum power current-Imp (A) 4.68 8.34
Open circuit voltage-Voc (V) 25.2 23.0
Short-circuit current-Isc (A) 4.96 8.70
Module efficiency µm (%) 17.6 18.0
Maximum system voltage 600VDC 600VDC
Maximum series fuse rating 10A 10A
MECHANICAL DATAPANEL TYPE 100W 160W
Cell type Mono-crystalline PERC Mono-crystalline PERC
Number of busbars 5 5
Number of cells 80 (2 x 4 x 10) 72 (2 x 4 x 9)
Glass 3.2mm high transmission, low iron, tempered glass
3.2mm high transmission, low iron, tempered glass
Frame Anodized aluminum alloy Anodized aluminum alloy
Connector SAE SAE
Junction box IP65 rated IP65 rated
Weight 18.7lbs (8.5kg) 27.6lbs (12.5kg)
Folded dimensions 18.1in x 26.4 in x 2.8in460mm x 670mm x 70mm
28in x 26.4in x 2.8in710mm x 670mm x 70mm
Open dimensions 36.2in x 26.4in x 1.4in920mm x 670mm x 35mm
55.9in x 26.4in x 1.4in1420mm x 670mm x 35mm
Charge controller dimensions 5.6in x 3.4in x 1.6in142mm x 85mm x 41.5mm
5.6in x 3.4in x 1.6in142mm x 85mm x 41.5mm
TEMPERATURE DATAPANEL TYPE 100W 160W
Operating temperature -40 °C to +85 °C -40 °C to +85 °C
Nominal operating cell temperature 45 +/- 2 °C 45 +/- 2 °C
Temperature coefficients of Pmax -0.40%/°C -0.40%/°C
Temperature coefficients of Voc -0.50%/°C -0.50%/°C
Temperature coefficients of Isc 0.08%/°C 0.08%/°C
*Standard Test Conditions (STC): Irradiance: 1000W/m2, Cell Temperature: 25°C, Air Mass: 1.5
XANTREX SOLAR PORTABLE KIT DATASHEET
XANTREX SOLAR PORTABLE KIT DATASHEET
SOLAR KITS
Mfg Part # Description
708-0080Remote Battery Temperature Sensor
708-0110SAE-to-Cigarette Lighter Battery Adapter Cable
ACCESSORIES
Mfg Part # Description
782-0100-01 100W Xantrex Solar Portable Kit
782-0160-01 160W Xantrex Solar Portable Kit
UPC CODES
100W SOLAR PORTABLE KIT
160W SOLAR PORTABLE KIT
SHIPPING INFO
Mfg Part #Estimated Weight (Kg)
Unit Dimensions (mm)
Master Carton Dimensions
Units in Pallet
782-0100-01 11.6 95 x 510 x 700 No Master Carton 99
782-0160-01 16.2 95 x 720 x 910 No Master Carton 56
100W DIMENSIONS 160W DIMENSIONS
36.2”920mm
26.4”670mm
1.4”35mm
55.9”1420mm
26.4”670mm
1.4”35mm
26.4”670mm
18.1”460mm
26.4”670mm
28”710mm
CLOSED CLOSEDOPEN OPEN
CONTACT CUSTOMER [email protected] of operation:6:30am - 4:30pm PST, Monday to Friday
LEARN MORE ON:
www.xantrex.com
youtube.com/XantrexTechnology
facebook.com/Xantrex
@Xantrex