plugfest glossydoc v0.1 2020 02 14 · plugfests focus on an end-to-end architecture allowing to...
TRANSCRIPT
![Page 1: PlugFest GlossyDoc v0.1 2020 02 14 · PlugFests focus on an End-to-End architecture allowing to test the functional areas, domains, or a combination of both, in an environment similar](https://reader036.vdocuments.net/reader036/viewer/2022070917/5fb7b736f865601ce17aa673/html5/thumbnails/1.jpg)
PlugFest telecominfraproject.com
PlugFestThe PlugFest Project Group defines test architecture and plan that give opportunity for operators to validate TIP technologies in the End-to-End environment.
Why?In the disaggregated world, no single vendor has complete ownership of the End-to-End product, thus potential customers would have to go through extensive integration and testing to verify the performance of both the device(s), and the device(s) integrated into an End-to-End network. The PlugFest Project Group addresses this by testing combinations of hardware and software in an End-to-End environment representative of an operator network. The PlugFest Project Group is consolidating the testing and validation of devices, aiming at reducing the load on both OEMs and Mobile Network Operators (MNOs). For the OEMs, the complexity of validation is reduced by going through a single common testing in conditions similar to MNO environment. For MNOs, onboarding validated products ensure that the test cycle will be shortened.
At a glanceThe PlugFest Project Group evaluates the readiness of TIP-sponsored solutions for integration into operator networks, to speed up the migration of TIP technologies from Lab to Field. The Project Group defines test architecture and plan, then validate in an End-to-End environment.• Test and evaluate multiple solutions in one common environment, representative of operator's environment• Reduce time to market market by reducing or replacing the need for validation in an operator’s lab
Transport
Core
RAN Access(excluding RAN)
Domains Functional Area
Inter-Operability
Performance
Stability &Scalability
Security
![Page 2: PlugFest GlossyDoc v0.1 2020 02 14 · PlugFests focus on an End-to-End architecture allowing to test the functional areas, domains, or a combination of both, in an environment similar](https://reader036.vdocuments.net/reader036/viewer/2022070917/5fb7b736f865601ce17aa673/html5/thumbnails/2.jpg)
DevelopmentsPlugFests focus on an End-to-End architecture allowing to test the functional areas, domains, or a combination of both, in an environment similar to what Service Providers have implemented. The E2E environment was initially used to test S1 Interoperability, then transport, primarily focusing on Disaggregated Cell Site Gateway (DSCG).In 2020, PlugFest will continue testing product in E2E environment but will also evolve toward testing and validating complete solution. The following PlugFest are in planning for 2020
• Rural Site Configuration
• TIP 4G/5G RAN
• Smart Cities Site Solution
• Mobile Data Offload
What next and join us• Learn more at telecominfraproject.com/plugfest/• Join the PlugFest Project Group at: telecominfraproject.com/plugfest/• Contact us with questions or comments: [email protected]
Benefits• Verify interoperability between disaggregated components• Enable end—to-end product validation• Supplement and accelerate MNO testing• Encourage direct feedback between MNO and partners
PublicInternet
Core
Core
TrafficGenerator
MasterClock
TrafficGenerator
TrafficGenerator
DCSG
DCSG
DU
CU
DCSG (OptionallyMicrowave)
Copyright © 2020 Telecom Infra Project, Inc. All rights reserved. The Telecom Infra Project logo is a trademark of Telecom Infra Project, Inc. in the United States or other countries, and is registered in one or more countries. THIS DOCUMENT IS PROVIDED “AS IS” AND WITHOUT ANY WARRANTY OF ANY KIND.
PlugFest Architecture
2019 PlugFest Badge Recipients
PlugFest
CoreRouter
AccessRouter