plugging boxes - cole lighting
TRANSCRIPT
C. W. Cole & Company, Inc.2560 N. Rosemead BoulevardSouth El Monte, CA 91733-1593
Fax (626) 443-9253Tel. (626) [email protected]
Plugging Boxes
C O L E L I G H T I N G
Cole Plugging Boxes provide protected
enclosures for electrical devices in floors and
walls. They are suitable for both high and low
voltage devices, which can be furnished with the
box or installed later by a contractor.
Floor models have covers which are suitable
for foot and other normal traffic loads. Most
models offer cord slots which allow the cover to
be flat while still having the required cords exit
the box. Various models have been developed
for theatrical stages, conference rooms, multi-
purpose facilities, gymnasiums, retail sales, and
convention centers.
Wall models have a lock to prevent use
by unauthorized persons. These models are
frequently used in hospitals, civic buildings,
churches and schools, where they are particu-
larly suited for outdoor assembly areas.
Modified or custom Plugging Boxes may also
be developed to meet your exact specifications.
To learn more about our custom capabilities
and comprehensive range of standard lighting
fixtures, call us directly or contact your local
Cole representative.
Plugging Boxes are available in many sizes for floor and wall installations.
Cord slots allow closed cover while allowing the cords to exit the enclosure.
Custom Plugging Boxes are fabricated to provide specialized capabilities.
PLUGGING BOXES
C. W. Cole & Company, Inc.2560 N. Rosemead BoulevardSouth El Monte, CA 91733-1593
Fax (626) 443-9253Tel. (626) [email protected]
Plugging Boxes
C O L E L I G H T I N G
310 SERIESRecessed Wall Box
DescriptionThe 310 Series Plugging Boxes are recessed wall mounted enclosures designed for the temporary connection of electrical devices in interior or exterior applications.
FeaturesThe 310 Series Plugging Boxes have a locking cover to assure protection from improper or un-authorized use. Key is removable only when lock is in "locked" position. Open cover will not fully close without use of key, permitting custodian to tell at a glance whether unit is open or locked. A barrier in the wiring area allows mixed voltage devices within the enclosure.
ApplicationsThe 310 Series Plugging Boxes are appropri-ate in schools, churches, hospitals and civic buildings for connection of lighting, sound and service appliance equipment.
CustomIf your project demands a special fixture we would be pleased to discuss the production of custom fixtures to suit your specific conditions. For more information on our custom capabilities, please contact your local Cole representative.
The 310 Series wall boxes provide secure, all-weather access to electrical devices.
Interior / Exterior Applications
QB 3M B09
C. W. Cole & Company, Inc.2560 N. Rosemead BoulevardSouth El Monte, CA 91733-1593
Fax (626) 443-9253Tel. (626) [email protected]
Plugging Boxes
C O L E L I G H T I N G
310 SERIES
Construction• Cover is cast aluminum with self-closing, locking door • All units keyed alike • Cover is gasketed weathertight • Housing is 16 gauge steel • Cover and housing metallic aluminum polyester powder coating
Electrical• Various wiring devices or combinations are available as indicated with catalog suffixes • Units with multiple-voltage requirements have metal circuit barrier. • All parts are grounded • Housing has eight 1/2"-3/4"-1" combination trade-size conduit entrances
Mounting• Interior or exterior stud wall or concrete pour
Recessed Wall Box
Specifications
How to Specify1. Select catalog number with desired features.2. Add suffixes for options required to meet job conditions.
Catalog Numbers
OptionsBronze Cover: Satin finished red brass. Add suffix -B.Concrete Mount: Add suffix -C.
TL-310Blank interior plate. No device furnished
TL-310-1Two duplex U-ground power outlets 15 amp, 125 volt
TL-310-2Two duplex 3-wire twist-lock power outlets.15 amp, 125 volt
TL-310-3One 3-pole microphone outlet and one 4-pole speaker outlet. Low voltage
TL-310-4One duplex U-ground power outlet with one3-pole microphone and one 4-pole speakeroutlet. 15 amp, 125 volt. Low voltage
TL-310-5One duplex 3-wire twist-lock outlet with one 3-pole microphone and one 4-pole speaker outlet. 15 amp, 125 volt. Low voltage
Additional combinations of above or other standard wiring devices as required. Standard voltage side: one duplex or one single device. Low voltage side: two devices. Specify complete requirements
TL-310-9
Weather Tight Cord Slot: Provides deeper housing and two cordslots. Allows for wet location use with device plugged in. Add suffix -WCS.
C. W. Cole & Company, Inc.2560 N. Rosemead BoulevardSouth El Monte, CA 91733-1593
Fax (626) 443-9253Tel. (626) [email protected]
Plugging Boxes
C O L E L I G H T I N G
The TLR Series provides no obstruction for traffic when locked in closed position.
TLR SERIESInterior Poured Concrete ApplicationsConvertible Recessed Box
DescriptionThe TLR Series Plugging Boxes are recessed floor mounted enclosures designed for the tem-porary connection of electrical devices in interior concrete pour installations. The unique design provides a smooth finished appearance when not in service, with no removable parts.
FeaturesThe natural satin brass cover rotates from the smooth out-of-service position to a clean ap-pearing in-service position. The device housing can have a barrier to separate voltages.
ApplicationsThe TLR Series Plugging Boxes are appropriate in schools, gymnasiums, churches, hospitals, civic buildings, offices and other areas with heavy foot traffic for the connection of lighting, sound and service appliance equipment.
CustomIf your project demands a special fixture we would be pleased to discuss the production of custiom fixtures to suit your specific conditions. For more information on our custom capabilities, please contact your local Cole representative.
A leveling collar allows adjustment to floor surface and Optional Carpet Flange (above right) overlaps carpet.
QB 3M B09
C. W. Cole & Company, Inc.2560 N. Rosemead BoulevardSouth El Monte, CA 91733-1593
Fax (626) 443-9253Tel. (626) [email protected]
Plugging Boxes
C O L E L I G H T I N G
TLR SERIES
Construction• Exposed parts are all cast red brass • Housing is 16 gauge steel • Carpet flange is heavy spun brass • Standard finish on exposed parts is clear coated satin brass • Finish on housing is black polyester powder • Latch for rotating plate requires common switch key
Electrical• Various wiring devices or combinations are available as indicated with catalog suffixes • Devices are factory-installed • Device housing has barrier to separate different voltages• Housing has two separate wireways with four ½" trade-size conduit entrance in each and sepa-rate feed wireways to device housing
Mounting• Housing is suitable for installation in poured concrete • Spun throw-away pan provides proper opening for leveling ring • Box designed for grout after leveling to finished floor • Carpet flange substitutes for adjustment ring on standard floor box • Edge of flange overlaps onto carpet and bites into pile
Convertible Floor Box
Specifications
How to Specify1. Select catalog number with desired features.2. Add suffixes for options required to meet job conditions.
Catalog Numbers
OptionsCast Iron Housing: Add suffix -FE. Carpet Flange: Add suffix -CF. Nickel plating: Matches stainless steel appearance. Add suffix -NP.
TLR-1 TLR-21
TLR-1DTLR-21D
TLR-2
TLR-3
TLR-4 TLR-4D
TLR-5
TLR-9
Single U-ground power outlet. 15 amp, 125 volt
Duplex U-ground power outlet.15 amp, 125 volt
Single 3-wire twist-lock power outlet on one side. 15 amp, 125 volt
Single 3-pole microphone outlet and single 4-pole speaker outlet on same side. Low voltage
Single or duplex U-ground power outlet on one side, microphone / speaker combination on other side. 15 amp, 125 volt. Low voltage
Single 3-wire twist-lock power outlet on one side, microphone / speaker combination on other side. 15 amp, 125 volt. Low voltage
Additional combinations of above or other stan-dard wiring devices as required. Maximum: Two 15 amp, 125 volt or two low-voltage devices per side. Specify complete requirements
C. W. Cole & Company, Inc.2560 N. Rosemead BoulevardSouth El Monte, CA 91733-1593
Fax (626) 443-9253Tel. (626) [email protected]
Plugging Boxes
C O L E L I G H T I N G
330 SERIES
DescriptionThe 330 Series Plugging Boxes are recessed floor mounted enclosures designed for the tem-porary connection of electrical devices in interior concrete pour installations where a minimal size is required. FeaturesCover opens to provide access to devices. Cord slot allows door to remain closed with cord connected. When cover is closed, a separate inner cover closes the cord slot. Separate wiring compartments allow high voltage devices on one side, low voltage devices on the other.
ApplicationsThe 330 Series Plugging Boxes are for instal-lation in schools, churches, offices, civic buildings, and other locations for the connec-tion of lighting, sound and service appliance equipment.
CustomIf your project demands a special fixture we would be pleased to discuss the production of custom fixtures to suit your specific conditions. For more information on our custom capabilities, please contact your local Cole representative.
Interior Applications
An inner door closes the cord slot when the 330 Series is not in use.
QB 3M B09
C. W. Cole & Company, Inc.2560 N. Rosemead BoulevardSouth El Monte, CA 91733-1593
Fax (626) 443-9253Tel. (626) [email protected]
Plugging Boxes
C O L E L I G H T I N G
330 SERIES
Construction• Frame and door are cast aluminum with natural satin finish • Housing and interior panel are 16 gauge steel with white polyester coating • Frame has integral flange for carpet; optional flangeless frame is available • Inner hinged cover closes cord slot when not in use
Electrical• Interior panels are provided blank to allow contractor to install required devices; can be provided with specified devices factory-installed • Housing has two 1/2"-3/4"-1" combination trade size conduit entrances in each end • Separation barrier is required if high and low voltages are present in same interior panel
MountingHousing is designed for installation in poured concrete floors.
Specifications
How to Specify1. Select catalog number with option suffix(es).2. Specify electrical devices if factory installation is desired.3. Indicate special conduit feed locations if required.
Catalog Numbers
OptionsBronze: Frame and doors are satin finished cast red brass. Add suffix -B. Flush Frame: Provides flangeless frame for non-carpeted floors. Add suffix -FF.Installed Devices: Specify required electrical devices for factory installation. Add suffix -9.
TLS-330
C. W. Cole & Company, Inc.2560 N. Rosemead BoulevardSouth El Monte, CA 91733-1593
Fax (626) 443-9253Tel. (626) [email protected]
Plugging Boxes
C O L E L I G H T I N G
370 SERIES
DescriptionThe 370 Series Plugging Box is a recessed floor mounted enclosure designed for the temporary connection of electrical devices in interior instal-lations. It provides a large space for many elec-trical devices, while still maintaining a smooth finished appearance.
FeaturesCover opens to provide access to devices. Cord slots allow door to remain closed with cord con-nected. Optional hinged door closes single 4" cord slot when not in use. Barrier can be provided behind interior panel to separate high and low voltage devices. The depth of the wiring area allows large devices and installation with large wire sizes.
ApplicationsThe TLS-370 Series Plugging Boxes are for installations in exhibition halls, auditoriums, and civic buildings for the connection of many electrical devices in one large plugging box.
CustomIf your project demands a special fixture we would be pleased to discuss the production of custom fixtures to suit your specific conditions. For more information on our custom capabilities, please contact your local Cole representative.
An optional inner door with an opening handle conceals a single cord slot when the 370 Series is not in use.
Interior Applications
QB 3M B09
C. W. Cole & Company, Inc.2560 N. Rosemead BoulevardSouth El Monte, CA 91733-1593
Fax (626) 443-9253Tel. (626) [email protected]
Plugging Boxes
C O L E L I G H T I N G
370 SERIES
Specifications
Construction• Frame and door are cast aluminum with natural satin finish • Housing is 16 gauge steel with white polyester powder • Frame has integral flange for carpet; optional flangeless frame is available • Four cord slots allow cords to pass with door in closed position
Electrical• Interior panel is provided blank to allow contractor to install required devices; can be provided with specified devices factory-installed • Combination knockouts for 1/2"-3/4"-1" conduit sizes are furnished in ends and back (2) • Separation barrier is required if high and low voltages are present in same box
Mounting• Housing is suitable for concrete pour or wood floor installation • Flanges are provided on the sides
How to Specify1. Select catalog number with option suffix(es).2. Specify electrical devices if factory installation is desired.3. Indicate special conduit feed locations if required.
Catalog Numbers
OptionsCast Bronze: Frame and door are satin finished cast red brass. Add suffix -B. Flush Frame: Provides flangeless frame for non-carpeted floors; includes concrete cover for proper installation. Add suffix -FF.Carpet Stops: Provides 1/4" vertical flange around perimeter of frame and cover for application of carpet directly on top of unit. Add suffix -CS.Single Cord Slot: Provides single 4" wide cord slot with hinged door. Add suffix -1S.Separation Barrier: Provides barrier below device mounting panel to allow different voltage devices to be used. Add suffix -SB.Installed Devices: Specify required electrical devices for factory installation. Add suffix -9.
TLS-370
C. W. Cole & Company, Inc.2560 N. Rosemead BoulevardSouth El Monte, CA 91733-1593
Fax (626) 443-9253Tel. (626) [email protected]
Plugging Boxes
C O L E L I G H T I N G
350 SERIESRecessed Stage Pockets
Theatrical Stage Floor PocketsExterior Watertight Box
DescriptionThe TLS-350 Series Plugging Boxes are recessed floor mounted enclosures designed for the temporary connection of electrical devices in theatrical installations where large or numerous devices are required. The unique TLS-351-W is designed for use in areas where water may fall on the plugging box. It is not recommended for areas subject to submersion.
FeaturesCover opens to provide access to devices. Cord slot allows door to remain closed with cord con-nected (except TLS-351-W). Non-skid pattern in certain models' covers provide traction for traffic. Separate wiring compartments allow high voltage devices on one side, low voltage devices on the other.
ApplicationsThe TLS-350 Series Plugging Boxes are appro-priate in schools, churches, theatrical stages and speaker platforms.
CustomIf your project demands a special fixture we would be pleased to discuss the production of custom fixtures to suit your specific conditions. For more information on our custom capabilities, please contact your local Cole representative.
Theatrical stage floor pockets, in various widths, have a non-skid pattern and cord slots.
The TLS-351-W may be installed in wet locations not subject to immersion.
The 350 Series boxes provide capacity for many electrical devices. The TLS-353 (top right) has an extra large access door.
QB 3M B09
C. W. Cole & Company, Inc.2560 N. Rosemead BoulevardSouth El Monte, CA 91733-1593
Fax (626) 443-9253Tel. (626) [email protected]
Plugging Boxes
C O L E L I G H T I N G
How to Specify1. Select catalog number with desired features.2. Add suffixes for options required to meet job conditions.3. For higher-rated outlets, specify requiredamperage.
OUTLETS
NUMBEROF
DEVICES &CORD SLOTS
OptionsCast Iron Cover: TLS-351-W only. Add suffix -FE. Watertight Cover: TLS-351 only. No cord slot. Device mounting area is 4"W x 7". Add suffix -W.
350 SERIESRecessed Stage Pockets
Specifications
CATALOG NUMBER
WIDTH(W)
Duplex 15 amp twist-lock
Duplex 15 amp U-ground
Single 3-wire U-ground power outlet (NEMA 5-20)
20 amp, 125 volt
Blank interior plate.No deviceFurnished
Other devices or combinations as required.
Specify requirements
1
2
3
4
7"
93/4"
125/8"
155/8"
TLS-351-2
TLS-352-2
TLS-353-2
TLS-354-2
TLS-351-3
TLS-352-3
TLS-353-3
TLS-354-3
TLS-351-6
TLS-352-6
TLS-353-6
TLS-354-6
TLS-351-8
TLS-352-8
TLS-353-8
TLS-354-8
TLS-351-9
TLS-352-9
TLS-353-9
TLS-354-9
Construction• Cover is cast iron with non-skid tread design and cord-clearance slots (except TLS-351-W) • 16 gauge steel housing • Cover and housing black polyester powder coated • TLS-351-W satin finished cast aluminum cover substitutes for standard cover on TLS-351 • TLS-351-W has neoprene gasket and is suitable for wet locations
Electrical• Various wiring devices or combinations are available as indicated with catalog suffixes • All parts grounded • Housings have eight ½"-
¾"-1" combination trade-size conduit entrances
Mounting• Two removable angles furnished for mounting to any side • Suitable for mounting in wood or concrete floors • Grout is required to seal cover with finished floor • Throw-away pan included for casting into poured concrete to provide clear-ance for cover
DEVICE MOUNTING
AREA
4"w x 33/4"
6"w x 3"
91/2"W x 6"
12"W x 3"
C. W. Cole & Company, Inc.2560 N. Rosemead BoulevardSouth El Monte, CA 91733-1593
Fax (626) 443-9253Tel. (626) [email protected]
Plugging Boxes
C O L E L I G H T I N G
362 SERIESInterior Applications
DescriptionThe 362 Series Plugging Boxes are recessed floor mounted enclosures designed for the temporary connection of electrical devices in interior installations where up to two devices are required. For installations requiring up to four devices, see the 364 Series.
FeaturesCover opens to provide access to devices. Cord slot allows door to remain closed with cord connected. The TLS-362 has straight sides for installation from above in existing wood floors. The TLA-362 is for concrete pour installations and may be adjusted to finished floor level. A barrier allows high voltage and low voltage devices to be installed.
ApplicationsThe 362 Series Plugging Boxes are for instal-lation in buildings such as schools, churches, theatrical stages, hospitals, civic buildings, offices, and other locations for the connection of lighting, sound and service appliance equip-ment.
CustomIf your project demands a special fixture we would be pleased to discuss the production of custom fixtures to suit your specific conditions. For more information on our custom capabilities, please contact your local Cole representative.
The TLS-362 Series provides a straight-sided housing for installation in wood floors.
The TLA-362 Series has an adjustable leveling collar for installation in poured concrete floors.
An optional Carpet Flange for the TLA-362 Series includes Finish Trim and provides an overlapping flange for carpeted installations.
QB 3M B09
C. W. Cole & Company, Inc.2560 N. Rosemead BoulevardSouth El Monte, CA 91733-1593
Fax (626) 443-9253Tel. (626) [email protected]
Plugging Boxes
C O L E L I G H T I N G
362 SERIES
Construction• Cover is cast aluminum • Standard cover door has non-skid grid and is self-closing with a cord slot • Cover is finished with black polyester coating • Models with Finish Trim or Carpet Flange option have smooth surface with satin aluminum finish • TLA-362: housing and leveling collar are cast aluminum • TLS-362: housing is 16 gauge steel
Electrical• Various wiring devices or combinations are available as indicated with catalog suffixes • Units with multiple-voltage devices have metal interior barrier between compartments • TLA-362 housing has two ½" trade-size tapped conduit entrances • TLS-362 housing has four 1/2"-3/4"-1" combination trade size conduit entrances • Listed by cETLus
Mounting• TLS-362: Box designed to be recessed in hardwood floors with no overlap. Particularly suitable for installation in existing floors where box flexes with floor • TLA-362: Box designed for poured concrete floors. Frame, with leveling screws, is adjustable and is designed for dry-pack grout after cover is leveled to finished floor.
Specifications
How to Specify1. Select catalog number with desired features.2. Add suffixes for options required to meet job conditions.
Catalog Numbers
OptionsBronze: Satin finished red brass. Add suffix -B.Carpet Flange: Includes Finish Trim. Add suffix -CF.Dust Cover Over Outlets: Add suffix -D.Cast Iron Housing: Add suffix -FE. Finish Trim: Add suffix -FT.
TLS / TLA-362Blank interior. No devices furnished
TLS / TLA-362-1Duplex U-ground power outlet.15 amp, 125 volt
TLS / TLA-362-2Duplex 3-wire twist-lock power outlet.15 amp, 125 volt
TLS / TLA-362-3Single 3-pole microphone outlet and single4-pole speaker outlet. Low voltage
TLS / TLA-362-4Single U-ground power outlet and single 3-polemicrophone outlet. 15 amp, 125 volt.Low voltage
TLS / TLA-362-5Single 3-wire twist-lock power outlet and single3-pole microphone outlet 15 amp, 125 volt.Low voltage
TLS / TLA-362-6Two single U-ground power outlets (NEMA 5-20) 20 amp, 125 volt
Additional combinations of above or other stan-dards wiring devices (maximum of 2)as required. Specify complete requirements
TLS / TLA-362-9
C. W. Cole & Company, Inc.2560 N. Rosemead BoulevardSouth El Monte, CA 91733-1593
Fax (626) 443-9253Tel. (626) [email protected]
Plugging Boxes
C O L E L I G H T I N G
364 SERIESInterior Applications
DescriptionThe 364 Series Plugging Boxes are recessed floor mounted enclosures designed for the tem-porary connection of electrical devices in interior concrete pour installations where up to four devices are required. For installations requiring up to two devices, see the 362 Series.
FeaturesCover opens to provide access to devices. Cord slot allows door to remain closed with cord connected. The TLS-364 has straight sides for installation from above in existing wood floors. The TLA-364 is for concrete pour installations and may be adjusted to finished floor level. A barrier allows high voltage and low voltage devices to be installed.
ApplicationsThe 364 Series Plugging Boxes are for installa-tion in buildings such as schools, churches, the-atrical stages, hospitals, civic buildings, offices, and other locations for the connection of lighting, sound and service appliance equipment.
CustomIf your project demands a special fixture we would be pleased to discuss the production of custom fixtures to suit your specific conditions. For more information on our custom capabilities, please contact your local Cole representative.
The TLS-364 Series provides a straight-sided housing for installation in wood floors.
The TLA-364 Series has an adjustable leveling collar for installation in poured concrete floors.
An optional Carpet Flange for the TLA-364 Series includes Finish Trim and provides an overlapping flange for carpeted installations.
QB 3M B09
C. W. Cole & Company, Inc.2560 N. Rosemead BoulevardSouth El Monte, CA 91733-1593
Fax (626) 443-9253Tel. (626) [email protected]
Plugging Boxes
C O L E L I G H T I N G
364 SERIES
Construction• Cover is cast aluminum • Standard cover door has non-skid grid and is self-closing with a cord slot • Cover is finished with black polyester powder • Models with Finish Trim or Carpet Flange option have smooth surface with satin aluminum finish • TLA-364: housing and leveling collar are cast aluminum • TLS-364: housing is 16 gauge steel
Electrical• Various wiring devices or combinations are available as indicated with catalog suffixes • Units with multiple-voltage devices have metal interior barrier between compartments• TLA-364 housing has two ½" trade-size tapped conduit entrances • TLS-364 housing has six ½"-¾"-1" six combination trade size conduit entrances • Listed by cETLus
Mounting• TLS-364: Box designed to be recessed in hardwood floors with no overlap. Particularly suitable for installation in existing floors where box flexes with floor • TLA-364: Box designed for poured concrete floors. Frame, with leveling screws, is adjustable and is designed for dry-pack grout after cover is leveled to finished floor.
Specifications
How to Specify1. Select catalog number with desired features.2. Add suffixes for options required to meet job conditions.
Catalog Numbers
OptionsBronze: Satin finished red brass. Add suffix -B.Carpet Flange: Includes Finish Trim. Add suffix -CF.Dust Cover Over Outlets: Add suffix -D.Cast Iron Housing: Add suffix -FE. Finish Trim: Add suffix -FT.
TLS / TLA-364Blank interior. No devices furnished
TLS / TLA-364-1Duplex U-ground power outlet on one side.15 amp, 125 volt
TLS / TLA-364-2Duplex 3-wire twist-lock outlet on one side. 15 amp, 125 volt
TLS / TLA-364-3Single 3-pole microphone outlet and single 4-pole speaker outlet on one side.Low voltage
TLS / TLA-364-4Duplex U-ground outlet on one side. Single3-pole microphone outlet and single 4-polespeaker outlet on other side. 15 amp, 125 volt.Low voltage
TLS / TLA-364-5Duplex 3-wire twist-lock power outlet on one side. Single 3-pole microphone outlet and single 4-pole speaker outlet on other side. 15 amp, 125 volt. Low voltage
TLS / TLA-364-6Two single U-ground power outlets (NEMA 5-20) one side. 20 amp, 125 volt
TLS / TLA-364-6
Additional combinations of above or other stan-dard wiring devices (maximum of 4) as required. Specify complete requirements