plumbing & drainage solution.pdf

7/29/2019 Plumbing & Drainage Solution.pdf

1/13MARLEY AkAtherm hDPe |

Soil &WasteDesign & installation

marley.co.uk


2/13

3MARLEYAkAtherm hDPe MARLEY Soil & Waste Systems |

Marley Soil & Waste systems

Marley Plumbing & Drainage of fer a comprehensive

range of soil and waste sys tems. Available with a

variety of jointing methods, Marley products are

manufactured to exacting UK and European standards

and are designed for use on commercial projects as

well as housing developments.

Innovation & Expertise

Product specication information

This guide contains design and installation

information for the Marley PVCu soil &

waste range. Design and installation guides

are also available for Marley Akatherm HDPE

drainage and dBlue acoustic soil. Product

specication information on all three

product ranges is available as a separate

document. All documentation can be

downloaded from marley.co.uk

Production information

Information on the complete range of

Marley Plumbing and Drainage system

solutions is available to download from

marley.co.uk or available via the literature

hotline 01622 852585.

BS EN ISO 9001:2008BS EN ISO 14001:2004

Contents

4 PVCu soil & waste systems

5 Commercial applications

6 Key components

Design8 Stack design

11 Design of waste systems

12 Waste traps

12 WC manifold system

14 Durgo air admittance valve

15 Fire protection

Installation16 J ointing techniques

17 Pipe support system

18 Boss branches

18 B oss pipe connections

19 WC connections

20 WC manifold system

21 Site work

22 British & European Standards

23 Marley system solutions


3/13

5MARLEY Soil & Waste Systems |MARLEY Soil & Waste Systems

Marley Akatherm HDPE

The Marley Akatherm HDPE drainage range iscertified to BS EN 1519: 2000 (licence numberKM 545820) An extension of the Marley soil& waste portfolio, the HDPE range offers analternative solution to cast iron.

It is particularly suited for commercialapplications or where a product with highimpact or abrasion resistance is required,such as hospitals, hotels, schools, as well asresidential buildings. HDPE will also cope withtemperature variations of -40C to 100C.

The combination of the excellent materialproperties of HDPE with homogenous weldedjoints provides greater installation flexibility

with a wide range of jointing options

Marley dBlue acoustic system

The Marley dBlue acoustic system is atriple-layer drainage system designed foruse where improved levels of soundproofingare required. Suitable for use in domesticapplications as well as hospitals and hotels,where reduced noise levels are required.Used in conjunction with the acoustic pipeclips, the dBlue system is designed to reducenoise and acoustic vibrations to a level of 19dB

at 4 l/s discharge rate. It is also lightweight,resistant to temperature change and is jointedusing the push-fit ring seal method.

The dBlue system is available in 40mm, 50mm,110mm and 160mm diameters. It is alsocompatible with the Marley PVCu soil and wastesystem for branch connections.

*40 mm and 160 mm pipe clips also available.

Commercial applications

2 pipe clip diameters*:

50 mm110 mm

Pipe clip fastening

Acoustic inlays

Suppression of vibrations between the system sectionThree contact surfaces with the pipeSpecial structure on the noise suppression surfaces

Secure fixing to the

buildings structure.

Elimination of the acoustic bridgebetween the soil stack and thebuildings structure

Key tting: Akavent aerator

The need for secondary venting in high-risebuildings can be eliminated with the Akaventaerator. An Akavent aerator fitting breaks thefall on each floor and as a consequence thesecondary vent pipe is not required as thepressure difference stays well within the limitof 3 mbar.

Solvent soil

The Marley PVCu soil range has beenextended with the addition of nine new110mm solvent fittings, offering furtheroptions for the installer. The range includesthe new 8-way soil manifold which offers

The unique shape of the fitting increasesthe capacity of the stack. The soil andwaste flow from the higher floors smoothlyconverges with the flow of the lower floor.

the flexibility of 4 top and 4 side entries,allowing for multiple inlet connections.At just 70mm above the floor slab, themanifold sits neatly at finished floor levelin most typical applications.

Akavent Aerator

Roof terminalSV42

Boss connector

SA421

45 teeKT21

Collar boss

SCB41

PipeKP204

88 bendKB2

Bottle trap

WBA4W

Low level bath trapWBP42W

P trapWPT4W

Waste pipe

Boss connectorSA421

Weathering slate

SAS45

Pipe clipSC45

PipeSL403

Branch

SY401

Bent pan connectorSWCB90

Boss pipe

SW40

PipeSP403

Slip couplingSE405

110mmUnderground pipe

PVCu soil & waste systems

82mm, 110 & 160mm push-t and solvent

weld soil systems incorporating socketed

and plain ended pipe

110mm WC connectors for all BS WC pans.

Available with solvent weld or push-t joints.

110mm WC manifold system allows ranges

of toilets to be connected horizontally. Ideal

for commercial applications.

50mm & 82mm oor outlet components

are available as separate components or

as an all in one trapped oor outlet.

Fire sleeves and pipe wraps, providing

up to 4 hours rating.

110mm & 160mm pipe support

components designed specically to

meet the needs of supporting horizontal

or vertical suspended PVCu pipework.

82, 110 and 160mm pipes and tti ngs are

also suitable for use as internal and external

rainwater pipes to drain at roofs and

metal gutter systems on commercial and

industrial buildings.

Solvent waste Push-t waste Compression waste Overfow Traps

PVCc ABS Polypropylene Polypropylene PVCu Polypropylene

Suitable for internaland externalapplications.

Lightweight and costeffective for internalinstallation. Easy tocut joint and install.

For internal use,ideally suited to fastinstallation. Costeffective solution wheresystems are beinginstalled or modified.

Multi-fit compressionsocket, for internaluse. Easy installationto similar sized newor existing plastic andcopper pipework.

A complete rangeof pipework andfittings for overflowapplications.

A range of traps, whichenable quick & easyinstallation to any newor existing plastic orcopper pipework.

Available in32, 40 & 50 mm


Available in32, 40 mm

Available in32, 40 mm

Available in21.5 mm


White, Black & Brown White, Black & Grey White, Black & Grey White & Chrome White White & Chrome

ABS and polypropylene waste pipes and fittings are designed for internal use and should not be fitted externally as they will be subject to ultraviolet lightdegradation. If fitted externally it is recommended that they are protected by the application of a suitable paint or are boxed in.


4/13

7MARLEY Soil & Waste Systems |MARLEY Soil & Waste Systems All documentation is available to download from marley.co.ukTechnical hotline: 01622 852695

Key components

Push-t soil range

The Marley range offers a quick,straightforward solution. In up to threecolour variants, pipe with a socket orspigot end and a wide range of ttings.Ideally suited for domestic and smallcommercial applications.

Manifold systemFor use in sanitary pipework systems in s chools,

hospitals, public and commercial buildings,the manifold system allows ranges of toiletsto be connected to a horizontal float abovefloor level and eliminates the need for speciallyfabricated fittings.

Fire protection systems

Universal re collar (UFC1)

& re sleevesFire sleeves and pipe wraps, providing up to 4

hours rating. The universal fire collar is designedto be surface mounted and is sufficient for 5 x110mm pipe collars.

WC connectorsConnectors for all BS WC pans to

accommodate a range of outlet sizesbetween 84 and 110mm. Available with

solvent weld or push-fit joints.

Durgo air admittance valveThe Durgo valve is designed to reduce the

number of roof penetrations. Suitable foruse in sanitary pipework systems up to ten

storeys high, the valve must be fitted in a

vertical position above the flood level of the

highest appliance connecting to the stack.

Anti-syphon bottle trap

(WBA3W & WBA4W)

Developed to prevent self-syphonage frombasins, which can occur particularly where

the waste pipe drops vertically from the

appliance. Non-mechanical, the trap operates

as air is drawn in through a central by-pass

tube to ensure the trap seal is maintained.

The Marley soil & waste range offers an extensive choice of standard ttings for

commercial and domestic projects.

Pictured is a selection of key components within the range. Product specication information on the PVCu, HDPE drainage and dBlue acoustic soilranges is available as a separate document. All documentation can be downloaded from marley.co.uk

Solvent Soil range

The Marley range offers a secure methodof jointing and includes the new eight-waycollar boss for multiple connections to thestack, solvent socket bends, branches andaccess ttings. Ideally suited for commercialand horizontal pipework situations.

8-way collar bossThe collar boss offers the flexibility of 4 topand 4 side entries, allowing multiple inletconnections. Specifically designed to prevent

cross-flow and to allow multiple low level bathor shower waste pipes to be connected to thestack above floor level.

Adjustable bendsAvailable in 82, 110 and 160mm and canbe adjusted by cutting the fitting at therequired angle and solvent welding the two

sections together.

Code Angle achieved

SB37 11 87

SB46 5 14

SB47 21 90

SB67 15 90

5 boss branch, 87 push-t

sockets/spigotThe Marley range of five boss branches aredesigned to allow multiple waste pipe connections

to be made to the discharge stack from differentdirections. Four different side entry combinationsare possible together with a rear, if required.

PVCu Soil Push-t or solvent weld


5/13

9MARLEY Soil & Waste Systems |MARLEY Soil & Waste Systems All documentation is available to download from marley.co.ukTechnical hotline: 01622 852695

Design

L = 450mm up t three streys hghL = 740mm up t fe streys hghL = e strey heght, er fe streys

UBL488 r2 UB455 bes

SWS415/41bss ppe

L

Dimensions and weights

PipeMaterial

Standard

BS nominalsize (mm/

inch)

Min MaxWall

thickness

(mm) Min

Weight

kg/metre

Soil PVCu

BS 4514 82 82.4 82.8 3.20 1.30

BS EN 1329 110 110.0 110.3 3.20 1.70

160 160.0 160.4 3.20 2.50

Waste 32/1 32.00 32.30 1.80 0.33

PVC-c 40/1 40.00 40.30 1.80 0.41

BS EN 1566 50/2 50.00 50.30 1.80 0.57

Waste 32/1 36.15 36.45 1.80 0.20

ABS 40/1 42.75 43.05 1.80 0.26

BS EN 1455-1 50/2 55.75 56.05 1.80 0.35

Waste

Polypropylene 32/1 32.00 32.30 1.80 0.21

BS EN 1451 40/1 40.00 40.30 1.80 0.26

Overflow

PVCu 21.5/ 21.55 21.70 1.10 0.11

BS EN 806-4

Secondary ventilated stack

Stack size Secondary vent Maximum capacity (l/s)

(mm) (mm) Swept entries

82 50 3.4

110 50 7.3

160 80 18.3

Primary ventilated stack

Stack size Maximum capacity (l/s)

(mm) Swept entries

82 2.6

110 5.2

160 12.4

lg raus beUBL488

m 200mmraus

Methods of jointingWhile the principal method of jointing 82, 110 and 160mm pipes and fittings is push-fit,many components in the range are also availa ble with sockets that allow for solvent weld jointing.This particular technique is widely used on smaller diameter waste and overflow pipework althoughexpansion and copper adaptor couplings include a push-fit joint to allow for thermal movement.

As polypropylene cannot be solvent welded, the push-fit method of jointing is used throughoutthe system.

Thermal movementThe coefficient of linear expansion for PVCu is 0.06mm/m/C. As a result a 3m length ofpipe will increase in length by approximately 3.6mm when subjected to a 20C temperaturevariation. Therefore, it is important to ensure that any movement is controlled and push-fitjoints are installed to accommodate any expansion that may occur due to increases in ambienttemperature or hot water discharges.

sletwel jt

push-ftjt

Bends at the base of stacksBends at the base of vertical stacks should be of long radius and have aminimum centre line radius of 200mm on a 110mm nominal size st ack.Two 45 radius bends may also be used as an alternative to provide thechange of direction and connection to the building drain. The samedesign principle should also be adopted where offsets occur in stacks ofone or more storey height.

Where pipework is suspended in a ceiling void or car park, it isrecommended that two 45 solvent weld bends are used with a shortpiece of pipe between to ensure the radius exceeds that required.

Sanitary pipework design

All sanitary pipework systems should be designed to satisfy t he following regulations and standards where applicable.

The Building Regulations 2010: Approved Document H, Section 1.

The Building Standards Technical Handbook (Scotland) 2010: Part M.

The Building Regulations (Northern Ireland) 2000, Technical Handbook N.

BS EN 12056: 2000, Parts 1 to 5.

Regular consultation is essential between Architects and Plumbing Engineers throughout the building design stage as the careful arrangement ofkitchen and bathroom appliances will simplify the final sanitary pipework layout. This will help to ensure that an efficient sanitary pipework systemis installed at minimum cost.

The design information provided in this catalogue is endorsed in the above publications and while every effort has been made to ensure accuracy,no responsibility can be accepted for errors or omissions. For detailed guidance please consult the relevant documents referred to above.

Branches at the base of stacksFor single dwellings up to three storeys high, the distance between thecentre line of the lowest branch connection and the invert of the drainshould be at least 450mm. For multi-storey systems up to five storeyshigh, the minimum distance should be 740mm and for systems higherthan five floors no connections are permissible at ground floor level.Where this occurs a separate stub stack should be provided to s erve theground floor or individual appliances should have their own separateconnection to the building drain.

Material and manufactureMarley Plumbing & Drainage pipes and fittings for domestic sanitarypipework systems are manufactured from different plastics materials

including PVCu, PVCc, ABS and Polypropylene.

The table right details the important dimensions and weights of each ofthe systems together with the relevant British and European Standard. Allpipes are manufactured using a continuous extrusion process and fittingsare produced by high-pressure injection moulding.

Chemical and temperature resistanceMost plastics used for sanitary pipework are highly resistant to thosechemicals normally found in domestic waste water and sewerage systems.Applications where chemicals and higher temperature discharges are likelyto occur, the Marley Akatherm HDPE drainage range may be more suitable.

Generally the maximum working temperature of Marley soil and wastesystems when subjected to continuous flow is 70C and 75C respectively.Higher intermittent discharges of up to 95C may be accommodatedprovided the period of discharge does not exceed two minutes duration.

Alternatively, reference can be made to ISO publications TR10358 &TR7620 which provide comprehensive information on chemical andtemperature resistance of plastics and rubber materials.

Sizing of soil stacksIt is recommended that the guidance given within BS EN 12056, part 2 be adopted when sizing soilstacks. Marley Technical Services Department offer design and installation advice, including the sizing

of soil stacks, for customers who use or specify Marley Plumbing & Drainage products.

Soil stack capacityThe capacity of a soil stack can be increased by the installation of a secondary ventilated stack. Thefollowing information is taken from tables 11 & 12 of BS EN 12056-2: 2000 which illustrates this increase.

Secondary ventilated stack


6/13


Design

Prevention of cross-owWhere small diameter branch waste pipesconnect to a discharge stack they must be

arranged to eliminate the risk of cross-flow fromone branch to the other. A branch creates ano entry zone for opposing waste connections,which varies depending on the stack diameter.No connections should be made within therestricted zone although entry is permissibleon the centre line of the boundary directlyopposite or at right angles.

Offsets in stacksOffsets in the wet portion of a discharge stackshould be avoided wherever possible butwhere they have to be fitted a large radius ortwo 45 bends should be used to create eachchange of direction. Offsets in lightly loadedstacks up to three storeys high do not requireoffset venting but on multi-storey buildings thismay be necessary depending on the loadingof the stack and the numbers of floors abovethe offset. The principles previously describedfor bends and branches at the base of a stackshould also be applied.

Stub waste

This technique is often used to connect isolatedground floor waste appliances such as basins,baths, shower trays and sinks to eliminate exposedpipework or low level ducting. The 110mmunventilated PVCu drain is terminated at finishedfloor level with a reducer and boss adaptor to suitthe size of waste from the appliance.

Stub stacksAn unventilated stub stack terminated with anaccess fitting may be used to connect a groupof ground floor appliances to the building drainprovided the vertical drop to the invert levelof the drain does not exceed 1.5m from a WCand 2.5m from a waste appliance. Where oneor more stub stacks are connected to the samedrain, the head of the run should be ventilatedto atmosphere or air admittance valves fitted toeach stub stack arrangement.

SE40access cap

SWS415/41bss ppe

SY401brach

lg rausbe UBL488

1.5mmax

2.5mmax

SA411/421/42032mm/40mmr 50mmbss cectr

SRM402eccetrc reucer

UB411be

H = 200mm rrespecte f stack ameter

Stack size

(mm)

Height o zone 'H'

(mm)

82 90

110 110

160 250

SWS40bss ppe

SA421bss aaptr

H

The Marley Collar Boss was specifically designed to overcome installation problems imposedby the 200mm restricted zone and to allow multiple low level bath or shower waste pipes to beconnected to the stack above floor level. Cross-flow is prevented as the circular annular chamberprotects the small diameter waste connections from the WC discharge allowing waste water toflow freely and merge below the critical zone.

Different combinations of 110mm branches can be used with the collar boss to accommodatevarious WC positions which may be up to 3 metres from the vertical stack.

Top & side wasteconnections

for maximumexibility, evenin tight spaces.Design prevents

any danger ofcross-ow.

SY401 Equal Branch

Hole cutter locator

No need or pipe to be cuton site, saving installation

time. Comes completewith pre-chamered spigottail or easy jointing.

Factory tted, airtested joint ensuringlong term integrity.

SCBL41 350mmLong spigot tail,

accommodating virtuallyall oor thicknesses.

SFC44 re collar,SFW44 pipe wrap canbe used within theoor slab.

SC41 clip ttedaround socket.

61mm

SA421bss cectr

SY401brach

SCB41cllar bss

8-way collar boss

To prevent cross-flow from a large diameterbranch to a smaller waste connection, the lattershould be made to the stack at or above thecentre line of the largerbranch, at right angles orat least 200mm below therestricted zone. Entry ispermissible on the boundarycentre line directly oppositeor at right angles.

SY405brach

H

Branch pipe gradientsThe gradient of a branch pipe should beuniform and adequate to drain the pipe andappliance efficiently. A minimum gradient of18mm/metre should be adopted for 32, 40 and50mm nominal size pipes but larger diameter82, 110 and 160mm branch runs may be laidflatter at 9mm/metre fall where the dischargeflow rate exceeds 2.5litres/second.

Branch pipe lengthsThe following information is taken from Table 8of BS EN 12056: 2: 2000 and provides generalguidance on the recommended lengths ofunventilated branch pipes for a variety of

sanitary appliances.

Appliances Dia (mm)Min.trap sealdepth (mm)

Max. lengtho pipe (m)

Pip e g radient (%) Max . bend s (No. ) Max . d rop H (m)

Washbasin or bidet 32 75 1.7 2.2 0 0

Washbasin or bidet 40 75 3.0 1.8 to 4.4 2 0

Bath or shower 40 50 No limit 1.8 to 9.0 No limit 1.5

Bowl urinal 40 75 3.0 1.8 to 9.0 No limit 1.5

Trough urinal 50 75 3.0 1.8 to 9.0 No limit 1.5

Kitchen sink 40 75 No limit 1.8 to 9.0 No limit 1.5

Dishwasher or washingmachine

40 75 3.0 1.8 to 4.4 No limit 1.5

WC 110 50 No limit 1.8 min No limit 1.5

The maximum lengths given above may be increased where the branch pipe is ventilated or an air admittance valve is used. For further details refer tothe above standard.

Arcflushactuationplate,

MarleySanitarySystems


7/13


Design

WC manifold systemDeveloped for use in sanitary pipework systemsin schools, hospitals, public and commercialbuildings, the manifold system allows rangesof toilets to be connected to a horizontal floatabove floor level and eliminate the need forspecially fabricated fittings.

The components are suitable for installation ina duct, or for fitting on the surface of the walldirectly behind the pan. Where the manifoldis fitted directly behind the range of toilets,

the minimum distance between the end of theWC spigot and the face of the wall is 150mm.To facilitate varying angles and gradients the110 x 90mm manifold branch has a radialsocket to match both options of adjustableWC bend. When the selected bend is cut tothe appropriate line and solvent welded intothe socket on the manifold branch a uniformfall is obtained between each toilet on thehorizontal float.

To accommodate different dimensionsbetween the WC spigot and horizontal float,the adjustable spigot bend SM43W may betrimmed by up to 35mm or the extension pipeSM45W can be used with the pan connectorSM44W and SA323W cap & seal.

The WC socket on both the SM42W andSM44W must be trimmed to suit the lengthof pan spigot before the SA323W is fitted.

For installation details see page 18.

SM42W& SA323W

SM41W

SY401/SY405branch

110mm float at9mm/metre fall

centre line of WC outletfrom finished floor level

190mm

Manifold branch SM41W with SM43W

Cut line 50 55 60 65 70 75 80 85 90

A projection (mm) 180 180 179 178 177 174 171 167 162

B drop (mm) 69 77 85 93 101 109 116 123 130

Manifold branch SM41W with SM42W

Cut line 50 55 60 65 70 75 80 85 90

A projection (mm) 93 93 92 91 90 87 84 80 75

B drop (mm) 69 77 85 93 101 109 116 123 130

353

0

SM41Wmaflbrach

SA323Wcap & seal

SM42Wajustable WC be

353

0

35

SM41Wmaflbrach

SM44Wpa cectr

SA323Wcap & seal

SM43WajustableWC be

A

B

A

B

Adjustable wall fixing

215mm minimumduct width

W.C. cistern

Flush plate

W.C. frame

front panel

SA323W cap & sealFlush pipe

SM43W WCspigot bend

SM41Wmanifold branch

110mm float

JB42 two peice pipe bracket

with SC621 barrel clip collar

SM44W pan connector

SM41WManifold branch

SM42WadjustableWC bend

W.C. seal & capSA323W

JB42 two peice pipe

bracket with SC621barrel clip collar

110 x 90mm branch SM41W Adjustable bend SM42W with socket

trimmed to suit 50mm pan spigot

WPL42W lwleel trap

bath/shwer

WBA4Wat-syphbttle trap

KT21W etry teeKBA22W45 be

SWS41bss ppe

500mm m40mm

Combined branch wasteA combined branch waste is often used toconnect a bath and/or shower and basin to thedischarge stack as this allows waste pipework tobe neatly concealed in a low level duct.

Where this technique is adopted a 45 entry teemust be used to ensure the basin discharge isswept in the direction of flow towards the stack.The minimum distance between the bath orshower and basin connection should not be lessthan 500mm and it is recommended that ananti-syphon bottle trap is fitted to the basin ora vent provided to protect the appliance fromself-syphonage.

It is recommended that the distance of thecombined waste does not exceed 3 metres,however, experience has shown that longer runsusing 40 or 50mm pipework has proved successfulprovided adequate fall can be obtained to ensureself-cleansing velocity is maintained

Waste trapsGenerally appliances such as sinks, baths andshowers do not suffer from self-syphonage asthe trap seal is replenished at the end of thedischarge due to the flat bottom design of theappliance. Tubular traps are recommendedfor such appliances as they ensure unrestricteddischarge and reduce the risk of blockage andprevent the accumulation of sediment.

Compression jointed polypropylene trapscan be taken apart to remove a blockageor gain access to the waste system

Range includes P-traps, S-traps, bottletraps, bath & shower traps and differentcongurations for washing machines,

dishwashers, 1 or 2 bowl sinks White with 50 or 75mm seal depths

Sizes: 32mm, 40mm, 50mm

The Marley anti-syphon bottle trap,WBA3W/WBA4W, was specially developed toprevent self-syphonage from basins, which canoccur particularly where the waste pipe dropsvertically from the appliance before falling at aneven gradient to the discharge stack.

The trap also eliminates the need for asecondary vent pipe where basins are locatedfurther than the recommended 3m maximumfrom the stack. Non-mechanical, the trapoperates as air is drawn in through a centralby-pass tube to eliminate any syphonic actionand ensure the trap seal is maintained.

The WSB4W shallow trap has a 20mm water seal

and is supplied to satisfy customer demand.It is recommended its use is restricted toground floor baths and showers that dischargedirectly to an external trapped gully. It shouldnot be fitted to a bath or shower where thewaste pipe is connected to a soil stack.


8/13


Design

Durgo air admittance valveThe Durgo valve is designed to reduce thenumber of ventilating pipes and subsequent roofpenetrations in domestic, commercial and publicbuildings. Suitable for use in sanitary pipeworksystems up to ten storeys high, the valve mustbe fitted in a vertical position above the floodlevel of the highest appliance connecting tothe stack. Valves should be installed withinthe building in a ventilated duct or roof spacewhere there is no risk of freezing and must beaccessible for inspection and testing.

The 50, 82 and 110mm size valves have beenassessed by the British Board of Agrment andawarded Certificate No 06/4325 which permitstheir use in accordance with the BuildingRegulations. A copy of the full certificateis available and provides comprehensiveinformation on their use and installation.

When installed the valve will remain closedunless the system is subject to negativepressure whereby the diaphragm will lift andallow air to be drawn in to eliminate syphonicaction. Positive pressure ensures the valvecloses and prevents foul air escaping from thesystem. Each valve is supplied boxed with apolystyrene insulation cover that should remainin position after installation, as this will protectthe valve against freezing, particularly wheninstalled in a roof space.

To ventilate the underground drainage systemand to minimise the effects of back pressureshould a blockage occur, the branch or maindrain serving a stack or stacks fitted with Durgovalves may require conventional venting at apoint upstream of the stack connection.

For up to and including four dwellings, 1, 2, or3 storeys in height, additional drain venting isnot required. Where a drain serves more thanfour such dwellings equipped with the valve,the drain should be vented according to thefollowing rules:

5 to 10 such dwelling conventional ventilationto be provided at the head of the system.

11 to 20 such dwellings conventionalventilation to be provided at the mid-point andat the head of the system.

For multi-storey domestic dwellings (other thanthose referred to previously) and non-domesticbuildings, conventional drain venting should

be provided if more than one such building,each equipped with the valves, is connectedto a common drain which itself is not ventedby means of a ventilating stack or a dischargestack not fitted with a valve.

Stacks should not be fitted with valves whenthe connecting drain is subject to periodicsurcharging or is fitted with an interceptingtrap. An open vent must be provided andthis also applies to stacks that discharge to acesspool or septic tank.

SYS41587.5 Brach

SRM304 110x82mmLeel ert reucer

SE400 Cuplgr ppe scket

BASin FLood LEvEL

BATH/SHoWER

F.F.L.

SC45 Ppe clp

110mm PvCu ppeWBA3Wat syph bttle trapKR210 reucer

KBA2245 be

40mm a

40mm a

WBP42Wlw leel 'p' trap

SWCB9090 cectr

KT2145 tee

SCBL41Cllar bss

SA421Bss cectr

2 45 BeKBA22/KB22

20th

SVP SVP DurgoDurgo Durgo Durgo

Up to 4 dwellings no SVP required

5 to 10 dwellings SVP at head

11 to 20 dwellings SVP at head and mid point

11th 10th 5th 4th 1st

Indicative row of 20 dwellings 3 storeys high (maximum) fitted with Durgo valves

Fire protectionThe Building Regulations 1991 (as amended)require that a building shall be sub-divided intocompartments where necessary to inhibit thespread of fire. Plastics pipework is permittedto penetrate separating walls, compartmentwalls and floors provided the appropriatemeasures are taken to prevent the spread offire in accordance with Part B of the ApprovedDocument (2010).

To comply with this, pipes must be enclosedwithin a fire resistant enclosure which extendsfrom floor to ceiling within each storey. Theenclosure must have a class O internal surfaceand have each side formed by a separatingwall, external wall or by casing. Any casing musthave a minimum hour fire resistance andpenetrations of the duct must be limited to160mm vertical and 110mm horizontal.

Where longer periods of fire resistance arerequired, Marley fire collars or pipe wraps canbe fitted to provide a fire rating of up to 4hours depending on the actual constructiondetail. Tests carried out at the Warrington FireResearch Centre in accordance with BS 476:Part 20: 1987 verified the integrity of eachconstruction detail shown opposite in respectof fire spread.

In addition to the above, tests carried out atFIRTO on a variety of typical sanitary pipeworkarrangements proved that it was possible toachieve up to 1 hour fire rating through acompartment floor without a fire collar or pipewrap where the stack was terminated by an airadmittance valve. Various other arrangementswere also tested and achieved a minimum of

2 hours integrity. The test work and technicalevaluation was independently assessed by theBritish Board of Agrment who issued AgrmentCertificate 86/1785 together with eleven detailsheets illustrating each assembly. Copies of thisoriginal certificate and the detail sheets areavailable from Marley Plumbing & Drainage.

The construction illustrated below achieved a1 hour fire resistance rating without the needfor a fire resistance enclosure. The enclosure isnecessary to achieve a 2 hour rating.

SW40bss ppe

SY401brach

Svd4 durg aramttace ale

SGS41/SA323WWC pa cectr

Flr a eclsure fre stppe at all pegs usgmaterals meetg bulg regulat requremets

SE400 ppescket

Fire collar

fixed to soffit ofconcrete floor

Pipe wrap

fixed within concrete floor

Fire collar

fixed to exposed side offire compartment wall

Pipe wrap

fixed within firecompartment wall

Universal re collar

fixed to soffit ofconcrete floor

Marley Fire Protection Products provide up to 4 hours resistance. Suitable for use with all Marley plastic drainage systems

Fire protection

110mm

SFW44ppe wrap

110mm

SFW44ppe wrap

55-160mm

UFCUersalfre cllar

110mm

SFC44fre cllar

110mm

SFC44fre sleee

SVD4-110mm

B1 rated valve

itted above

lood level o

basin

SVD3-82mm

A1 rated valve

itted below

lood level o

basin


9/13


Installation data

Jointing techniquesThe ring seal has been successfully employed asthe principal method of jointing large diameterPVCu pipes and fittings since their introductionover thirty years ago. This particular techniquehas proved extremely reliable as the joint canaccommodate thermal movement that willoccur as a result of temperature variations. Anexpansion gap of between 5-10mm should beallowed within each ring seal socketas each full length of pipe is installed and fixedusing socket and barrel pipe clips.

Solvent weld jointing is also widely used andmany components in the range are availablewith this facility to provide an effectivealternative. By selecting these fittings a solvent

weld system can be installed, however, ringseal joints must be incorporated to controlthermal movement.

While the most popular method of jointinglarger size PVCu pipes and fittings is by ringseal, with small diameter waste pipework theprincipal choice is usually solvent weld. Wherethis technique is used expansion couplingsmust be introduced where pipe lengths exceed2 metres or between fixed points. The sameprinciple should also be adopted when thepolypropylene push-fit waste system is installed.

It should be noted that polypropylene cannotbe solvent welded and together with the PVCuwaste system must not be fitt ed externallyunless painted to protect it from ultra-violetdegradation.

Pipe supportExperience has proved that an efficient andreliable PVCu sanitary pipework system dependsconsiderably on the attention that is placedon the correct provision of pipe supportbrackets. This is particularly important in multi-storey buildings where care must be taken toensure clips are positioned to control thermalmovement at each floor level.

Plastic coated metal socket clips are designedto fit ring seal sockets and act as anchorbrackets. These used in conjunction with PVCuintermediate pipe clips, control expansion andcontraction and maintain the vertical alignmentof the stack.

Two piece socket clips SC41/61 may be adaptedto suit the appropriate pipe size by using asection of barrel clip collar SC621 to providethe necessary spacer sleeve. The table belowindicates the maximum recommended supportcentres of different size plastic pipe systems.

Marley pipe support systemThe Marley pipe support range was developedto meet the specific requirements of PVCususpended sanitary pipework and drainagesystems. Manufactured in zinc electro platedmild steel for internal use, the versatile rangeof components can be assembled to providea robust, lightweight system suitable for mostapplications. The system also provides suitablecontrol of expansion and contraction.

The arrangements of brackets and channelsupports have been extensively tested andthe assembly techniques used have beensuccessfully employed on many domestic andcommercial installations.

Single supportRecommended for waste or larger diameterpipework fixed within 500mm of the floor soffit.

Double support

Developed for use with larger diameterpipework fixed within 1.0m of the floor soffit.

Pipe brackets

The 110 mm two piece pipe brackets aredesigned to fit round the ring seal socket ofa pipe or fitting. Where intermediate supportbrackets are located, the SC621 PVC barrel clipcollar is used as a spacer sleeve between thepipe and bracket.

Angle and side bracing

Angle braces should be provided at 6m centresto prevent lineal and thermal movement.Side bracing may also be necessary on longruns where there are no side connections toeliminate lateral movement.

Vertical pipes

The transition between vertical and horizontalpipework should be achieved using two 45bends or a single 871/2 long radius bend with asupport bracket positioned as close as possible.

Branch connections

All branch connections into horizontal pipeworkshould be made at 45 to ensure the dischargeis swept in the direction of flow.

Structural xings

It is recommended that 6mm rawlbolt or similarproprietary fixings are used to secure base plateand angle cleats to the structure.

Double support

Pipe materialBS Nominal

pipe size

Horizontal support

(m)

Vertical support

(m)

PVCu 21.5 0.50 1.20

Polypropylene 32 0.50 1.20

40 0.50 1.20

PVCc 32 0.50 1.20

ABS 40 0.50 1.20

50 0.60 1.20

PVCu 82 1.00 2.00

110 1.00 2.00

160 1.20 2.00

Single support

500mm max.

or 600mm withside bracing

anchor bracket

angle brace

intermediate bracket

see table

110mm pipe

r g se al j t sl e t wel j t

expas cuplg KEC2

ppe clps

40mm waste ppe

barrel ppe clp SC45 scket ppe cl p SC41

SC45 ppe clp

SP403 110mmPvCu ppe

2mmaximum

SC41 scket clp

anchor bracket

angle brace

intermediate bracket

1.0m max.

or 1.2m with

side bracing

110mm pipe

see table


10/13


Installation data

Single boss pipes.

Available with ring seal or solventweld sockets for push-fit or solventweld jointing, single boss pipesallow 32, 40 and 50mm waste pipeconnections to be made at 87direct to the vertical stack.

Strap-on-bosses.

Primarily designed to permit 32, 40and 50mm waste pipe connectionsto be made to existing 110mm PVCudischarge stacks, strap-on-bossescan also be used on new systems toprovide flexibility of installation duringdifferent stages of construction.

Multiple entry boss pipes.

Supplied in ring seal or solvent weldoptions, all have 90 boss upstandsmoulded on each fitting with oneinlet port open. Connection is madeusing the appropriate size Marleyboss connector to suit 32, 40 or50mm waste pipes.

Patch bosses.

Suitable for solvent weld jointing tonew and existing 82mm diameterPVCu discharge stacks to accept32, 40 and 50mm size PVCc or ABSwaste pipework.

Boss pipe connectionsFour different types of fitting are available to provide alternative methods of connecting small diameter waste pipes to 82, 110 and 160mm verticaldischarge stacks.

110mm

SWS415/SWS41

110mm

SWS4150/410/420

82mm

SWS332/340/350

SW30/40bss brach

SA411/421/420bss cectr

32, 40 r 50mm ppe


32, 40 r50mm ppe

SY405brach


SY405brach

KBK25 r KBK35

kuckle be


SY405

brach

SA411/421/420

bss cectr

SY405

brach

32, 40 r50mm ppe

WC connectionsTwo different types of connectors are availableto allow connection to vitreous china or stainlesssteel WC pans, slop hoppers and other similarsanitary equipment. Manufactured in PVC andeva (ethylene vinyl acetate) to accommodate arange of outlet sizes between 84 and 110mmsanitary pipework or undergound drainage.

The 90 ST40W, ST41W and SG40W connectorsare supplied complete with flexible seal andretaining cap. Where the SGS41W or STS41Wpan connectors are used, the WC socket must betrimmed to suit the length of pan spigot beforethe SA323W is solvent welded in position.

Ground floor toilets often have their ownconnection to the building drain to eliminatepipework and ducting. Where this occurs bothtypes of connector are suitable for push-fit orsolvent weld jointing to the 110mm PVC drain.

ST40W

solventWC connector

110mm

SWCB90push-fit WCconnector

110mm

SGS41Wsolvent

WC connector

SA323WWC seal andretaining cap

110mm

SWC11push-fitWC connector

110mm

ST40Wsolvent WC connector

110mmPVCu drain

SWCB90push-fit WC connector

110mmPVCu drain

Boss branchesThe Marley range of five boss branchesare designed to allow multiple waste pipeconnections to be made to the dischargestack from different directions. Four differentside entry combinations are possible togetherwith a rear if required. Staggered wastepipe connections, directly opposite are notpermitted as cross-flow could occur.

CompatibilityBoss pipes, boss connectors and strap-onbosses fitted with multi-fit T ring seals aresuitable for use with PVCc or ABS waste systemsto BS EN 1566 or BS EN 1455-1, polypropylene

to BS EN 1451-1 and metric size copper toBS EN 16090.

Un-perforated boss upstands on boss pipes,branches and reducers may be drilled to accept32, 40 and 50mm boss connectors SA411,SA421 and SA420 using a 51mm diameter holesaw. Knuckle bends KBK25 and KBK35 may alsobe used as 90 boss connectors for 40 and50mm PVCc or ABS waste pipework.

Horizontal connectionsThe SWS4135 boss pipe is recommended foruse in horizontal situations where connectionsto 110mm diameter pipe is made at 45. Thisfitting has a 50mm solvent weld socket toaccept PVCc or ABS waste pipes.


11/13


12/13


Standards Marley system solutions

BS EN 1329-1: 2000

Plastics piping systems for soil and waste

discharge (low and high temperature)

within the building structure PVCu.

BS 4514: 2001

Specication for PVCu soil and ventilating

pipes, ttings and accessories.

BS EN 1566-1: 2000

Specication for thermoplastics waste pipe

and ttings.

BS 5255: 1989

Specication for thermoplastics waste pipe

and ttings.

BS EN 1455-1: 2000

Plastics piping systems for soil and waste

(low and high temperature) within the

building structure ABS.

BS EN 1451-1: 2000

Specication for polypropylene waste

pipe and ttings.

BS EN 274: 2002

Waste ttings for sanitary appliances.

BS EN 806-4: 2010

Specication for installations inside

buildings conveying water for human

consumption.

BS 5627: 1984

Specication for plastics connectors

for use with horizontal outlet vitreous

china WC pans.

BS EN 14680: 2006

Specication for adhesives for non-pressure

thermoplastics pipe systems.

BS EN 681-1: 1996

Elastomeric seals. Material requirements for

pipe joint seals used in water and drainage

applications. Part 1 vulcanised rubber.

BS EN ISO 9001: 2008

Quality systems. Model for Quality

Assurance in Design, Development,

Production, Installation and Servicing.

BS EN ISO 14001: 2004

Environmental management systems.

Requirements with guidance for use.

Certifcate No. 06/4325 BS EN ISO 9001: 2008

BS EN ISO 14001: 2004

BS EN 1329-1 : 2000

BS 4514 : 2001

BS EN 1566-1: 2000

BS 5255: 1989

BS EN 1455-1: 2000

BS EN 1451-1: 2000

British & European Standards

Accreditations

Marley HDPE

Marley Akatherm HDPE is a drainage system

which offers an alternative solution to cast

iron. It is particularly suited for commercial

applications or where a product with high

impact or abrasion resistance is required,

such as hospitals, hotels, schools, as well as

residential buildings. HDPE will also cope

with temperature variations of -40C to

100C making it ideal for external as well as

internal installations.

Marley dBlue

An Acoustic soil and waste range with a

triple layered pipe providing quick, hygienic

removal of sanitary waste water. The

noise generated by the ow of water is

dramatically reduced making it perfect for

multi-occupancy apartment blocks and high

specication developments.

Marley waste systems

A wide range of PVC-C, ABS and

polypropylene waste ranges from 32mm

to 50mm and in a variety of colours. Therange includes waste traps in a hygienic

white nish and higher specication

chrome nish. Available with solvent weld,

compression and push t jointing.

Marley sanitary

High quality, durable, water and energy

efcient solutions for the modern wash

room, the range includes sanitary frames,

concealed cisterns, ush actuation plates,

linear and point drainage. Ideal for all

situations, from commercial applications,

including special products for schools, to

high specication domestic settings.

Marley rainwater

Seven gutter proles and ve downpipe

options provide a rainwater solution

for any application. Advanced Life4

technology on four of the key proles,

coupled with the benets of the Easyclip

and notching capability combine to make

the Marley rainwater range the most

comprehensive available.

Marley underground systems

The Marley Plumbing & Drainage range

of underground systems include the

solid wall range, predominately for

round the house drainage and Quantum

structured wall range for sewer and

highway drainage applications.

Marley sustainable drainage

The Waterloc250 cell is ideal for use in either

an underground inltration or attenuation

systems. 96% of the cell volume is available

to store water, minimising the extent of

excavation required for the installation. The

range includes Flowloc, a vortex control

device, which controls the rate at which water

is discharged to a surface water drain or

water course.

Marley Alutec

Alutec offer modern and traditional

aluminium rainwater proles, providing

solutions for any type of building. Aluminium

has high visual appeal and durability, lasting

for 50 years or more. The product portfolio

includes Evolve; easy to install, low cost gutter

systems in four proles. The rainwater ranges

are complemented by aluminium soft and

fascia systems and roof & oor outlets.

Equator

Equator is ideal for hot & cold water or

central heating installations. A tamperproof

tting with a unique grip release mechanism

ensuring that the system can only be

disassembled through the use of a special

de-mounting tool. Equator has been designed

to meet the requirements of BS 7291: Parts 1

& 3; Class S. The complete Equator system is

backed by a 30 year guarantee.


13/13

Head Oce

Lenham, Maidstone

Kent ME17 2DE

Tel: 01622 858888

Fax: 01622 858725

Scotland

Birkenshaw Industrial Estate

Uddingston, Glasgow G71 5PA

Tel: 01698 815231

Fax: 01698 810307

xport Division

Lenham, Maidstone

Kent ME17 2DE England

Tel: +44 (0)1622 858888

Fax: +44 (0)1622 850778

June 2012

marley.co.ukFor general enquiries and details ofyour nearest stockist please call thecustomer services department:Tel: 01622 852585

email: [email protected]

For Technical advice please call01622 852695

plumbing & drainage solution.pdf

Documents