Pneu LubeAir Tool Cleaner & Lubricant

Dissolves and removes sludge, dirt, operating erosion and dust

accumulation. Lubricates and protects all moving parts. Restores air

tools to peak performance and RPM. Use regularly for preventative

maintenance to cut downtime and costly repairs.

• Extends life of air tools.

• Cleans, lubricates and reconditions.

• Prevents rust and corrosion.

• Displaces and eliminates moisture.

T E C H N I C A L DATA S H E E T

© 2011 Continental Research Corporation. [012411]H A S S L E F R E E B U S I N E S S S I N C E 1 9 6 7

Loosens and helps flush away calcium build-up from moisture in air lines.

Use to Clean and Lubricate:Air Operated ToolsJackhammersDrillsSawsImpact Wrenches

SandersPolishersGrindersAir Operated Motors

SKU: 42903

P R O D U C T L A B E L

© 2011 Continental Research Corporation. [012411]H A S S L E F R E E B U S I N E S S S I N C E 1 9 6 7

PneuPneuPneuPneuLubeLubeLubeLube

• Cleans, lubricates,& reconditionsair-powered tools

• Eliminates moisture to prevent rust & corrosion

• Preventative maintenance that extends tool life

DANGER: EXTREMELY FLAMMABLE. HARMFUL OR FATAL IF SWALLOWED. CONTENTS UNDER PRESSURE. SEE OTHER CAUTIONS ON BACK PANEL.

NET WT. 12 OZ / 340 G

SOLD BY:

Pneu Lube eliminates calcium build-up from moisture in air lines. Dissolves sludge, dirt and dust accumulation. Lubricates and protects all moving parts. Restores air tools to peak power and RPM’s. Use regularly for preventative maintenance to cut downtime and costly repairs.

USE FOR CLEANING & LUBRICATING: Air Operated Tools, Sanders, Jackhammers, Drills, Saws, Impact Wrenches, Polishers, Grinders, Air Operated Motors

DIRECTIONS: SHAKE WELL BEFORE USING. For interior application, insert extension tube into actuator orifi ce prior to use.

1. Spray into all openings including air inlet connection.

2. Allow product to penetrate for several seconds.3. Run air tool at maximum RPM for 30 seconds.4. Repeat above for severe conditions.5. For long term tool storage, repeat directions

1 through 3.

KEEP OUT OF REACH OF CHILDREN. Intentional misuse by concentrating and inhaling the product can be harmful or fatal.

WARNING: This product contains a chemical(s) known to the state of California to cause cancer and birth defects or other reproductive harm.

See Safety Data Sheet for complete safety information. CONTAINS NO OZONE DEPLETING CHEMICALS! MADE IN THE USA.

PNEU LUBE PNEUMATIC TOOL CLEANER & LUBRICANT

DANGER: Extremely fl ammable aerosol. May be fatal if swallowed and enters airways. Keep away from heat/sparks/open fl ames/hot surfaces. - No smoking. Do not spray on an open fl ame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 49°C/120°F. Dispose of contents/container in accordance with local/regional/national/international regulations.

FIRST AID: IF SWALLOWED: Immediately call a poison center/doctor. Do NOT induce vomiting. IF ON SKIN: Wash off with soap and water. Get medical attention if irritation develops and persists. IF IN EYES: Rinse with water. Get medical attention if irritation develops and persists. IF INHALED: If symptoms develop move victim to fresh air. Get medical attention if symptoms persist. IF EXPOSED OR CONCERNED: Get medical advice/attention.

CONTAINS (CAS#): Solvent Naphtha (Petroleum), Light Aliphatic (64742-89-8), Butane (106-97-8), Naphtha (petroleum), Light Alkylate (64741-66-8), Ethyl Alcohol (64-17-5), n-Heptane (142-82-5), Propane (74-98-6), Cyclohexane (110-82-7) and Octane (111-65-9).

150505

Pneumatic Tool Cleaner

Pneumatic Tool Cleaner

& Lubricant& Lubricant