pneumatic atomizing nozzlesnozzle range. criteria for selecting pneu-matic atomizing nozzles 1....

Atomization of viscous liquidsCoolingGas coolingHumidification of airHumidification of goodsLubricationWeb dampeningand many others...

Pneumatic

atomizing

nozzles

1.2

Pneumatic atomizing nozzles

Pneumatic atomizing nozzlesare available in various de -signs to comply with specificspray and flow requirements:

n self-aspiration (siphon prin-ciple)

n supply of liquid from a ves-sel located at a higher level (gravity principle)

n supply of liquid underpressure (pressure prin -ciple)

n mixing of fluids inside oroutside the nozzle

n full cone or flat fan spraypattern

For many applications, ad -justability of liquid flow and,thereby, of the droplet size, ispossible with the aid ofmanually operated accessorycomponents.A pneumatically controlledpiston (series 136) ormagnetic valve (series 166)allows to perform automatic orintermittent opera tions.A number of special custom -ized designs complete thenozzle range.

Criteria for selecting pneu -matic atomizing nozzles

1. Spray pattern

Pneumatic flat fan atomizingnozzles should be chosen forhumidifying and cooling ofgoods, for web dampeningand for a number of paintingtasks; in short, wherever abroad linear impact is requi-red. Pneumatic full cone atomizing nozzles, however,should be used, when a com-pact, circular impact or amajor reach is required, e.g.for direct air humidifying, forgas cooling or for chemicalprocess applications.

2. Mode of liquid supply

Whenever liquid can be sup-plied under pressure, it isrecommended to use nozzlesfunctioning by the liquid pressure principle. Use ofpneumatic atomizing nozzlesopera ting to the siphon or thegravity principle is recom-mended when liquid is to besprayed in small quantities,e.g. for spraying of disinfect -ants.

3. Mixing of fluids

The supply of air or gas provi-des an additional breaking upof the liquid flow into finestdrop particles. This supplyand mixing can either takeplace inside or outside thenozzle. Inside mixing shouldbe preferred, when water, lowviscosity liquids or liquidswithout solid matter are to beatomized. Outside mixing isparticularly suited for atom -izing viscous liquids which areprone to impurities and there-fore tend to cause clogging ofthe nozzle. Low liquid pres -sures are used with this typeof nozzle due to its design.

We can also supply completemodular nozzle lances onrequest. We would be happy to sendyou detailed product informa-tion.

Siphon principle Liquid pressure principle

Gravity principle Pressure principle with pneumaticallycontrolled valve (example)

Air

Liquid

Air

Liquid

Liquid

Liquid

mm H2O

mm H2O

Control air forpneumatic valve

1.3


Series 136

Spray Mode of Mixing Series V Water Application Pagepattern liquid of fluids [l/h]

supply<)

.

1.13

1.15

1.9

0.10 – 76.10 Web dampening,humidification ofgoods, cooling.

45°60°80°

Flatfan

Pressureprinciple

Inside

0.80 – 3.20 Web dampening,humidification ofgoods, cooling.

60°Flatfan

Siphon orgravityprinciple

Inside

1.70.40 – 93.20 Humidification of air, cooling.

20°Fullcone

Pressureprinciple

Inside

0.40 – 132.90 Humidification of air, cooling.

60°Fullcone

Pressureprinciple

Inside

1.100.30 – 66.70 Chemical industry,cooling, spraying ofviscous liquids.

20°Fullcone


Out side

136.4

136.5

136.1

136.2

136.3

1.4


Series 136


supply<)

.

1.17136.6 1.70 – 102.10 Web dampening,humidification ofgoods, atomizationof viscous fluids.

45°60°

Flat fan

Pressureprinciple

Out side

1.5


Series 166


supply<)

.

1.24

1.23

0.10 – 76.10 Web dampening,humidification ofgoods, cooling.Version withmagnetic valve.

45°60°80°

Flat fan

Pressureprinciple

Inside

1.210.40 – 93.20 Humidification of air, cooling.Version withmagnetic valve.

20°Fullcone

Pressureprinciple

Inside

0.40 – 132.90 Humidification of air, cooling.Version withmagnetic valve.

60°Fullcone

Pressureprinciple

Inside

166.4

166.1

166.2

1.26166.6 1.70 – 102.10 Web dampening,humidification ofgoods, atomizationof viscous fluids.Version withmagnetic valve.

45°60°

Flat fan

Pressureprinciple

Out side

1.6



supply<)

.

1.30

On request.

Auf Anfrage.

140 4.50 – 12.00 Lubrication,cooling,humidification of air.

20°– 30°Fullcone


Inside

170 8.50 – 290.00[l/min]

Gas cooling, flue gas desulphurisation,exhaust gas condi-tioning, dust control.

15°Fullcone

Pressureprinciple

Inside

150 0,15 – 63,00[l/min]

Chemische Verfah-renstechnik, Küh-lung, Zerstäubungviskoser Medien.

20°– 30°Voll -kegel-strahl

Druck-prinzip

außen On request.150 0.15 – 63.00[l/min]

Chemical processengineering, coo-ling, atomizing ofviscous liquids.

20°– 30°Fullcone

Pressureprinciple

Out side

1.31176ViscoMist™

7.80 – 307.00[l/h]

Coating processes,moistening, lubrica-tion, glazing, disin-fection,

variableSolidstream

Fullcone

Flat fan

Pressureprinciple

Out side

1.7

Fine full cone atomizationand fogging with air or gas.Liquid pressure principle.Internal mixing of fluids. Applications: Humidification of air, cooling.

Pneumatic atomizing nozzles, Full cone, pressure principle, internal mixingSeries 136.1

39,6 mm10 mm10 mm

Hex 11

35,8

mm

1/4

BS

PP

1/4

BS

PP19

,3 m

m

Ø 4

2 m

m

Example Type + Material no. (xx) = Ordering no.for ordering: 136. 115. xx. A2 + 1Y = 136. 115. 1Y. A2

E = narrowest free cross section (water) Continued on next page.

1.7

Series 136.1

Locking plug

Liquid Shut-Off /Clean-Out Needle


Pneumaticallycontrolled valve

Seal-ing

Nozzle body

Nozzle tip

Lockring

Accessories for series 136 please refer to page 1.28

<)

300

150

D2

D1

Series 136.1

136. 115. xx. A2 0.50

0.400.801.20

-----

5.903.801.70

-----

0.300.600.90

-----

1.401.802.202.60

----

5.804.102.201.20

----

0.801.001.401.70

----

2.402.803.203.604.004.404.805.20

9.107.505.904.402.902.001.100.40

1.101.201.501.802.102.502.803.00

3.003.403.804.204.605.005.405.80

11.009.608.206.805.504.102.902.10

1.201.401.601.902.202.502.803.10

0.701.502.003.004.00

6060605555

10095

10095

100l l

136. 125. xx. A2 0.50

0.801.201.602.002.402.803.203.604.004.404.80

--

4.704.404.003.503.002.702.001.601.301.000.60

--

1.501.902.302.603.003.203.704.104.504.905.20

--

1.201.602.002.402.803.203.604.004.404.805.205.606.00

7.006.606.205.805.404.904.403.903.503.102.702.301.90

1.802.202.603.003.403.704.104.504.805.205.605.906.30

2.803.203.604.004.404.805.205.606.00

----

9.108.708.408.007.707.307.006.606.20

----

3.303.704.104.504.805.205.605.906.30

----

3.403.804.204.605.005.405.80

------

10.6010.309.909.609.308.908.60

------

3.904.304.605.005.405.806.10

------

1.402.202.803.404.20

0.701.502.003.004.00

5555556060

9095

100100100

l l

Ordering no.

Type Mat. no.

316L

SS

EØ

[mm]

Liquid pressure p [bar] Spray dimensions

351Y

Bra

ss p

late

d

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pW

ater

[bar

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

0.7 1.5 3.0 4.0

. . . . . . . .pA

ir[b

ar]

<)

Spray angle

20°

Weight brass: 200 g

D2[mm]

D1[mm]

0.801.802.603.204.40

1.8

Pneumatic atomizing nozzles,Full cone, pressure principle, internal mixingSeries 136.1


E = narrowest free cross section (water)

136. 134. xx. A2 0.7

1.201.602.002.402.803.203.604.004.404.805.205.606.00

13.2012.4011.8011.4011.1010.8010.6010.4010.109.909.509.008.50

2.703.303.904.404.905.506.006.507.007.608.108.609.20

2.002.402.803.203.604.004.404.805.205.606.00

--

19.4018.1017.3016.7016.1015.6015.2015.0014.6014.1013.80

--

3.904.404.905.506.006.507.007.608.108.609.10

--

3.003.403.804.204.605.005.405.80

-----

28.3027.5026.7025.9025.0024.2023.6023.10

-----

5.205.706.306.807.307.808.408.90

-----

3.804.204.605.005.405.80

-------

32.6032.0031.3030.6029.9029.30

-------

6.206.807.307.808.408.90

-------

1.802.803.805.206.00

0.701.502.003.004.00

5560606565

95105105110110

l l

136. 142. xx. A2 2.5

1.401.802.202.603.003.403.804.204.605.005.405.80

24.2020.4020.0019.3017.6016.5017.0016.3015.1014.0013.1012.40

5.106.307.208.209.30

10.4011.4012.4013.3014.3015.3016.20

1.602.002.402.803.203.604.004.404.805.205.606.00

53.4042.6035.3030.4028.6028.2027.3025.9024.3022.3021.8021.40

4.705.907.208.409.50

10.5011.5012.5013.5014.6015.7016.70

3.203.604.004.404.805.205.606.00

----

70.8062.5055.7049.3044.6041.9040.4039.70

----

8.009.20

10.6011.7012.9014.1015.1016.10

----

3.804.204.605.005.405.80

------

93.2083.1075.3069.0063.4057.50

------

9.2010.1011.3012.5013.7014.90

------

0.801.603.004.006.00

0.701.502.003.004.00

6065606565

100105105110110

l l

Ordering no.

Type Mat. no.

316L

SS

EØ

[mm]


351Y

Bra

ss p

late

d

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir

[b

ar]

pW

ater

[bar

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

0.7 1.5 3.0 4.0

. . . . . . . .pA

ir[b

ar]

<)

Spray angle

20°

D2[mm]

D1[mm]

1.9

Locking plug




Seal-ing

Nozzle body

Nozzle tip

Lockring

Pneumatic atomizing nozzles,Full cone, pressure principle, internal mixingSeries 136.2

Fine full cone atomizationand fogging with air or gas.Especially wide spray angleof 60°. Pressure principle. Internal mixing of fluids. Applications: Humidification of air, cooling.

39,6 mm10 mm 10 mm

Hex 11

35,8

mm

1/4

BS

PP

1/4

BS

PP19

,3 m

m

Ø 4

2 m

m



Weight brass: 200 g


300

D2D1

150

Series 136.2

Series 136.2

60°

136. 215. xx. A2 0.5

1.602.002.402.80

---

5.106.207.208.10

---

25.6017.8011.306.90

---

2.603.003.403.804.204.60

-

44.2033.0024.7018.1013.209.30

-

7.008.209.20

10.2011.2012.00

-

3.604.004.404.805.205.606.00

93.7078.3065.8054.9045.6038.0036.10

7.909.30

10.6011.9013.0014.1014.40

4.204.605.005.405.806.00

-

132.90117.20101.1087.9076.6071.20

-

7.309.00

10.4011.8013.2013.80

-

0.801.00

-------

2.804.30

-------

17.506.00

-------

1.601.802.002.20

-----

25.9014.706.701.90

-----

4.005.306.708.10

-----

3.003.203.403.603.804.00

---

40.4031.5022.2014.608.504.50

---

5.806.908.209.50

11.0012.30

---

3.804.004.204.404.604.805.005.205.40

54.9045.6037.6029.6021.6015.309.706.002.90

6.407.308.509.70

11.2012.4013.8015.2016.50

1.001.201.40

----

1.301.501.80

----

3.001.800.70

----

1.601.802.002.202.402.60

-

5.804.903.802.801.700.80

-

1.701.902.102.302.502.80

-

2.803.203.604.004.404.805.00

8.507.205.704.002.200.800.40

2.402.803.203.604.104.504.60

3.804.204.605.005.405.806.00

9.408.206.905.403.802.301.40

3.103.503.904.204.705.205.60

1.001.602.403.204.20

0.801.602.303.204.20

2.002.602.403.604.20

0.701.502.003.004.00

0.701.502.003.004.00

0.701.502.003.004.00

200230230245250

250245245250245

235245255255265

330380385390410

450465465465465

380415420425430

l l

136. 222. xx. A2 1.0

1.4

l l

136. 231. xx. A2 l l

Ordering no.

Type Mat. no.

316L

SS

Spray angle

EØ

[mm]


351Y

Bra

ss p

late

d

<)

D1[mm]

D2[mm]p

Air

[bar

]

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pW

ater

[bar

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

0.7 1.5 3.0 4.0

. . . . . . . . .pA

ir[b

ar]

1.10

Locking plug




Seal-ing

Nozzle body

Nozzle tip

Lockring

Particularly fine full coneatomization with air or gas.Siphon principle or gravityprinciple. External mixing of fluids. Applications: Chemical industry, cooling,atomization of viscous liquids.

Pneumatic atomizing nozzles,Full cone, siphon principle, external mixingSeries 136.3

39,6 mm10 mm 10 mmHex 11

31,3

mm

1/4

BS

PP

1/4

BS

PP19

,3 m

m

Ø 4

2 m

m


Operational information:Liquid flow of pneumatic atomizing nozzles with external mixingcan be turned down to 0 with air pressure remaining constant.


Weight brass: 200 g

<)

300

150

D2

D1

Series 136.3

Series 136.3

Ordering no.

Type Mat. no.

316L

SS

Spray angle

EØ

[mm]

Water V [l/h] Spray dimensions

351Y

Bra

ss p

late

d

20°

<)

0.4

0.60.8

1.201.401.802.002.402.603.003.203.603.804.204.404.805.005.405.606.00

0.700.901.101.201.401.601.801.902.102.202.402.602.802.903.103.203.403.603.80

-1.291.471.501.621.681.741.801.921.952.072.132.222.252.252.252.132.071.98

1.381.441.621.681.801.861.921.982.072.102.192.252.372.402.342.312.252.192.10

1.321.381.531.621.711.771.861.891.951.982.102.162.282.342.282.222.162.101.95

--

1.021.141.261.321.441.501.591.651.801.831.951.981.921.891.801.741.56

--

0.840.961.111.171.321.321.441.501.651.711.801.891.861.831.681.651.50

---

0.660.900.961.141.201.291.351.501.591.681.771.771.711.561.441.26

------

0.510.630.840.961.141.231.381.441.501.411.050.72

-

--------

0.390.480.720.811.081.141.140.840.30

--

1.403.204.806.00

150

Vn

[m3/h]

p

[bar] 450300 100 200 300 600 900

300300300300

60608070

110120135120

.

Water column[mm H2O]

Aspiration height[mm H2O]

.

Air

136. 316. xx. A2 ll

pAir

[bar]

Aspira-tion-

height[mmWS]

D1[mm]

D2[mm]

Accessories forSeries 136 please refer to page 1.28

1.11


20°

0.7

0.801.201.401.802.002.402.603.003.203.603.804.204.404.805.005.405.606.00

0.901.101.201.501.601.801.902.102.202.402.602.802.903.103.203.403.503.80

-------

5.435.555.826.036.306.366.276.125.825.675.31

-----------

6.666.726.576.426.125.975.58

------------

7.056.846.756.486.306.00

2.493.123.363.753.964.294.414.714.805.075.225.645.885.975.885.495.224.80

1.712.532.783.223.393.733.914.184.314.564.725.155.385.475.365.034.844.48

-1.862.222.672.853.213.393.753.904.204.384.714.925.225.104.714.534.08

----

0.661.411.682.072.252.612.883.213.603.934.053.813.631.92

----------

2.102.852.971.93

----

1.203.204.806.00

300300300300

60657080

115125135135

ll136. 324. xx. A2

0.7

0.600.801.201.401.802.002.402.603.003.203.603.804.204.404.805.005.405.606.00

1.201.401.802.002.302.502.803.003.403.503.904.004.404.604.905.105.405.605.90

----

5.195.435.796.006.306.426.756.877.297.628.378.528.348.197.86

-----

5.976.276.486.756.907.177.327.808.168.858.858.648.498.16

-----

6.426.726.907.147.297.597.808.348.739.219.158.888.768.43

2.192.643.393.694.204.474.864.985.375.525.826.036.396.697.327.717.717.597.26

-2.283.003.333.874.084.534.685.075.195.555.736.096.396.997.327.537.417.05

-1.442.733.063.513.784.204.414.714.895.195.375.796.096.697.057.297.206.84

--

0.781.112.162.583.303.573.874.024.294.474.835.135.766.066.486.456.15

-----

0.841.441.772.312.523.423.814.174.384.865.195.675.735.64

0.803.204.806.00

300300300300

65657075

120115115120

ll136. 334. xx. A2

Ordering no.

Type Mat. no.

316L

SS

Spray angle

EØ

[mm]


351Y

Bra

ss p

late

d<)

150

Vn

[m3/h]

p

[bar] 450300 100 200 300 600 900

.



.

Air

1.11



pAir

[bar]

Aspira-tion-

height[mmWS]

D1[mm]

D2[mm]

1.12

20°

1.5

1.401.802.002.402.603.003.203.603.804.204.404.805.005.405.606.00

3.604.204.505.205.506.106.407.007.308.008.308.909.209.80

10.1010.80

--

11.9712.1812.2712.2712.3012.4212.5413.1713.5313.9814.0413.7413.3512.21

----

13.3213.2313.1713.2013.2613.8314.1314.5214.5214.3114.0412.90

-----

14.1614.0714.0714.1014.4914.7315.1515.1514.9414.64

-

8.829.459.75

10.2610.4710.6510.7411.0111.2812.1212.4812.9913.0512.6612.2710.98

-8.498.919.519.75

10.0510.2310.5310.8611.7612.1512.6312.6612.2411.8210.50

-7.5

7.958.739.039.429.63

10.0510.4411.4011.7612.1812.3011.7911.3710.17

3.935.225.766.757.147.748.138.859.30

10.4110.8011.1911.1610.6210.088.70

-3.394.055.195.586.396.817.868.469.69

10.0810.2910.119.218.527.05

1.803.004.206.00

300300300300

70707070

120120120120

ll136. 342. xx. A2

2.5

3.203.603.804.204.404.805.005.405.606.00

11.5012.5013.1014.2014.8015.9016.5017.6018.1019.20

-------

61.1260.9359.89

-----

63.3963.7564.1763.8762.88

------

66.6966.7266.4865.43

-45.7347.8151.6153.1055.3056.0556.7156.6655.69

38.9241.9445.1449.0750.8753.4054.1555.0455.0453.98

--

42.2946.4648.3051.2652.1853.1753.2252.11

-33.1735.3639.5841.5945.0646.2947.6247.6845.78

---

29.9431.5934.6835.8837.8338.4337.05

3.804.605.406.00

300300300300

9595

10095

135145150150

ll136. 351. xx. A2

Ordering no.

Type Mat. no.

316L

SS

Spray angle

EØ

[mm]


351Y

Bra

ss p

late

d<)

150

Vn

[m3/h]

p

[bar] 450300 100 200 300 600 900

.



.

Air



pAir

[bar]

Aspirati-on-

height[mmWS]

D1[mm]

D2[mm]


1.13

136. 443. xx. A2 1.0

1.201.401.601.80

-------

1.501.701.902.10

-------

13.9011.909.507.80

-------

1.601.802.002.202.402.602.803.003.203.403.60

26.6024.3022.0019.9018.0016.2014.4012.8011.309.908.80

1.601.802.002.202.402.602.803.003.203.403.60

3.003.403.804.204.605.005.405.806.00

--

37.1033.1029.5026.2023.0020.2017.6014.9014.10

--

2.603.003.403.804.204.604.905.305.50

--

3.604.004.404.805.205.606.00

----

45.6041.9038.3035.0031.8029.0026.20

----

2.903.303.704.004.504.905.20

----

1.202.002.803.804.80

0.701.502.003.004.00

110115145150160

165190190210230

l l



45°

Ordering no.

Type Mat. no.

316L

SS

Spray angle

EØ

[mm]


351Y

Bra

ss p

late

d

<)

B1[mm]

B2[mm]p

Air

[bar

]

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pW

ater

[bar

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

0.7 1.5 3.0 4.0

. . . . . . . . .pA

ir[b

ar]

Locking plug




Seal-ing

Nozzle body

Nozzle tip

Lockring

Particularly fine flat fan atomization with air or gas.Pressure principle. Internal mixing of fluids. Applications: Web dampening, cooling,humidification of goods.

Pneumatic atomizing nozzles, Flat fan, pressure principle, internal mixingSeries 136.4

39,6 mm10 mm 10 mmHex 11

39,8

mm

1/4

BS

PP

19,3

mm

1/4

BS

PP

Ø 4

2 m

m

Weight brass: 200 g


300150

B2

B1

Series 136.4

Series 136.4

136. 414. xx. A2 0.7

1.001.201.401.601.80

------

1.301.501.701.902.10

------

7.706.004.202.701.30

------

1.401.601.802.002.202.402.602.803.003.203.40

14.3013.0011.6010.208.907.405.904.603.202.101.10

1.501.601.802.002.202.402.602.803.003.203.40

2.202.603.003.403.804.204.605.005.405.806.00

22.4020.0017.7015.5013.3011.008.806.604.302.501.60

2.002.302.603.003.403.704.104.504.905.305.50

3.003.403.804.204.605.005.405.806.00

--

25.1023.0020.9018.9016.9014.9012.8010.809.80

--

2.502.803.103.503.804.204.605.005.20

--

1.402.403.203.804.60

0.701.502.003.004.00

85100105120130

125145155170210

l l

Continued on next page.

1.14

136. 425. xx. A2 0.5

0801.201.602.002.402.803.00

------

1.201.601.902.302.602.903.10

------

6.505.504.704.003.202.602.20

------

1.401.802.202.603.003.403.804.004.404.805.205.606.00

9.408.707.907.206.405.705.104.804.203.602.802.201.60

1.702.102.402.703.103.403.703.904.204.504.805.105.50

2.402.603.003.403.804.204.605.005.405.806.00

--

13.2012.9012.3011.8011.1010.409.809.208.608.107.80

--

2.502.703.003.403.704.004.304.605.005.305.40

--

2.402.803.203.604.004.404.805.205.606.00

---

16.1015.5015.0014.5013.9013.4012.8012.2011.7011.20

---

2.502.903.203.503.804.104.504.805.105.40

---

1.202.203.003.405.60

0.701.502.003.004.00

155165170200200

195255265330330

l l

136. 462. xx. A2 1.5

1.201.602.002.402.803.203.604.004.40

---

2.603.404.104.805.406.006.607.207.80

---

19.0012.209.407.105.705.003.603.202.20

---

2.002.402.803.203.604.004.404.805.205.605.80

-

22.0018.0014.4011.308.808.106.204.603.201.600.80

-

2.002.402.803.203.603.904.304.604.905.305.40

-

3.003.403.804.204.605.005.405.806.00

---

61.8051.9044.6039.0033.4029.4025.5022.0020.60

---

4.004.805.806.607.408.108.909.609.90

---

3.804.004.204.404.604.805.005.205.405.605.806.00

76.1070.4065.6061.3057.3054.1051.3049.3046.5043.7041.3039.00

4.605.105.505.906.406.707.207.708.208.608.909.30

1.202.403.203.806.00

0.701.502.003.004.00

120120120140145

140170175205205

l l

136. 452. xx. A2 1.5

1.001.401.802.202.602.80

--

3.905.707.008.409.80

10.30--

18.808.607.404.101.000.10

--

1.802.002.202.402.602.80

--

31.0025.4020.1015.5012.4010.40

--

5.306.307.208.008.909.60

--

3.203.604.004.404.805.205.606.00

50.1039.5031.3024.0017.7013.4010.608.60

7.709.40

11.2012.9014.5016.0017.5018.80

3.804.204.605.005.405.806.00

-

70.7058.6048.6041.2033.6027.5024.40

-

8.209.60

11.2013.1014.8016.4017.20

-

1.001.802.603.605.00

0.701.502.003.004.00

130150155175180

185240245280285l l

136. 433. xx. A2 0.4

1.001.201.401.60

---

2.002.402.803.20

---

11.608.105.303.70

---

1.802.002.202.402.602.803.00

18.3015.3012.209.807.605.904.40

2.803.203.604.004.304.705.00

3.003.403.804.204.605.005.40

31.0025.4020.6016.3012.509.306.50

3.704.405.105.906.607.308.00

3.804.204.605.005.405.806.00

37.5032.4027.7023.4019.4015.9014.20

4.405.005.706.507.207.908.30

1.402.203.003.805.20

0.701.502.004.004.00

150185205300260

210255300485395

l l

Ordering no.

Type Mat. no.

316L

SS

Spray angle

EØ

[mm]


351Y

Bra

ss p

late

d<)

B1[mm]

B2[mm]p

Air

[bar

]

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pW

ater

[bar

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

0.7 1.5 3.0 4.0

. . . . . . . . .pA

ir[b

ar]

E = narrowest free cross section (water)Example Type + Material no. (xx) = Ordering no.for ordering: 136. 462. xx. A2 + 1Y = 136. 462. 1Y. A2

Pneumatic atomizing nozzles,Flat fan, pressure principle, internal mixingSeries 136.4

45°

60°

80°

1.15

Locking plug




Seal-ing

Nozzle body

Nozzle tip

Lockring

Particularly fine flat fan atomization with air or gas.Siphon principle or gravityprinciple. Internal mixing of fluids. Applications: Web dampening, cooling,humidification of goods.

Pneumatic atomizing nozzles,Flat fan, siphon principle, internal mixingSeries 136.5

39,6 mm

10 mm 10 mmHex 11

39,2

mm

1/4

BS

PP

1/4

BS

PP

19,3

mm

Ø 4

2 m

m

Weight brass: 200 g


300150

B2

B1

Series 136.5

Series 136.5

60°

0.4

0.801.201.401.802.002.402.603.003.203.603.804.204.404.805.005.405.606.00

1.802.202.502.903.103.503.704.204.404.805.005.505.706.106.306.807.007.40

-1.891.951.981.951.891.831.741.711.741.921.981.952.012.102.312.312.22

-2.132.162.222.192.252.252.011.921.831.802.042.042.042.132.342.282.22

-2.192.252.342.312.252.252.222.162.102.102.192.192.162.222.282.252.22

1.621.801.861.891.891.831.741.711.651.801.861.921.892.012.192.252.192.10

1.531.771.801.861.801.711.711.621.621.771.861.831.862.012.192.222.162.10

-1.681.681.771.681.681.591.561.591.741.801.831.802.042.162.162.102.04

1.171.411.471.531.501.471.441.441.591.681.711.681.742.042.102.042.011.92

0.881.161.211.261.261.221.181.281.381.471.491.701.771.981.931.861.801.79

1.003.004.606.00

300300300300

130150170180

165200225240

ll136. 516. xx. A2

Ordering no.

Type Mat. no.

316L

SS

Spray angle

EØ

[mm]


351Y

Bra

ss p

late

d

<)

150

Vn

[m3/h]

p

[bar] 450300 100 200 300 600 900



.

Air




pAir

[bar]

Aspira-tion-

height[mmWS]

Spraywidth

B1[mm]

Spraywidth

B2[mm]

Operational information:Liquid flow of pneumatic atomizing nozzles with external mixingcan be turned down to 0 with air pressure remaining constant.

.

1.16

0.5

0.600.801.201.401.802.002.402.603.003.203.603.804.204.404.805.005.405.606.00

1.601.902.302.603.003.303.703.904.404.605.105.305.706.006.406.607.107.307.80

--

2.752.842.962.942.872.822.592.482.372.342.352.302.252.202.522.502.57

--

2.842.903.013.022.972.862.712.512.312.372.352.322.242.212.232.452.61

---

3.053.163.163.103.042.852.712.512.522.432.442.412.372.362.582.76

2.002.212.532.632.782.732.592.492.232.092.252.222.202.202.122.092.602.572.37

-2.102.392.512.642.692.502.462.111.962.182.232.132.072.032.032.552.542.40

-1.982.332.422.562.582.382.292.041.912.192.152.112.052.081.982.492.392.18

--

2.042.142.202.182.011.911.731.741.981.991.941.961.902.252.262.161.94

--

1.691.821.881.821.681.621.721.871.901.851.821.832.122.272.082.021.80

1.003.004.606.00

300300300300

155200215250

240295325400

ll136. 525. xx. A2

Pneumatic atomizing nozzles,Flat fan, siphon principle, internal mixingSeries 136.5


60°

Ordering no.

Type Mat. no.

316L

SS

Spray angle

EØ

[mm]


351Y

Bra

ss p

late

d<)

150

Vn

[m3/h]

p

[bar] 450300 100 200 300 600 900

.



.

Air


pAir

[bar]

Aspira-tion-

height[mmWS]

B1[mm]

B2[mm]

1.17

Locking plug




Seal-ing

Nozzle body

Nozzle tip

Lockring

Fine flat fan atomizationwith the aid of air or gas.Liquid pressure principle.External mixing of fluids. Applications: Web dampening, cooling,humidification of goods, atomization of viscous liquids.

Pneumatic atomizing nozzles, Flat fan, pressure principle, external mixingSeries 136.6

39,6 mm

10 mm 10 mmHex 11

31,3

mm

1/4

BS

PP

1/4

BS

PP

19,3

mm

Ø 4

2 m

m


Weight brass: 200 g

300150

B2

B1


Series 136.6

Series 136.6

45°

136. 616. xx. A2 0.4

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

2.503.103.704.304.905.506.106.707.307.908.509.109.60

10.20

1.681.801.922.102.072.192.192.222.222.222.222.222.222.22

0.801.001.401.802.202.603.003.604.004.404.805.205.606.00

2.432.462.582.612.762.732.732.762.762.762.762.762.762.73

2.402.903.604.204.805.406.006.707.307.908.509.109.70

10.20

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

3.423.483.513.633.633.633.633.663.693.693.693.663.663.66

2.503.103.704.304.905.506.106.707.307.908.409.109.60

10.20

1.001.401.802.202.603.003.403.804.204.605.005.405.806.00

3.693.813.873.843.903.933.903.933.963.933.933.933.873.87

2.803.404.004.605.205.806.407.007.608.208.809.40

10.0010.20

1.402.203.204.005.00

0.070.150.200.300.35

80909095

100

115130135145145

l l

859595

100100

120130135140145

136. 635. xx. A2 0.5

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

2.503.103.704.304.905.506.106.707.307.908.409.009.60

10.20

2.372.612.853.033.123.153.213.183.213.213.213.213.123.18

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

3.453.543.663.723.903.873.963.963.963.963.963.963.903.84

2.403.103.704.304.905.506.106.707.207.908.409.009.60

10.20

0.801.201.602.102.402.803.203.604.004.404.805.205.606.00

4.805.105.015.105.135.165.225.255.225.225.225.225.225.16

2.403.103.704.304.905.506.106.707.307.908.409.009.60

10.20

1.001.401.802.202.603.003.403.804.204.605.005.405.806.00

5.345.375.465.465.585.585.585.585.585.585.585.585.585.58

2.803.404.004.605.205.806.407.007.608.108.709.309.90

10.20

1.402.203.204.005.00

0.070.150.200.300.35

l l

Ordering no.

Type Mat. no.

316L

SS

Spray angle

EØ

[mm]


351Y

Bra

ss p

late

d

<)

B1[mm]

B2[mm]p

Air

[bar

]

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pW

ater

[bar

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

0.07 0.15 0.30 0.35

. . . . . . . . .pA

ir[b

ar]

1.18


136. 645. xx. A2 0.5

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

2.803.504.204.905.606.207.007.608.309.009.70

10.4011.0011.70

2.732.823.093.273.363.393.453.483.513.543.573.573.603.60

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

3.693.873.994.114.174.204.264.294.324.354.384.354.354.38

2.803.504.204.905.606.307.007.608.309.009.70

10.4011.1011.70

1.001.401.802.202.603.003.403.804.204.605.005.405.806.00

5.165.315.375.375.435.495.495.555.555.585.555.615.615.61

3.203.904.605.205.906.607.208.008.609.30

10.0010.7011.4011.80

1.001.401.802.202.603.003.403.804.204.605.005.405.806.00

5.555.645.675.765.825.825.885.885.885.945.945.945.945.97

3.103.904.605.205.906.607.308.008.709.30

10.1010.7011.4011.80

1.602.403.204.005.20

0.070.150.200.300.35

100110115125130

140150155160165

l l

. . . . . . . . .

859090

100105

135140140145150

136. 626. xx. A2 0.4

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

2.803.604.304.905.606.307.007.608.409.009.70

10.4011.2011.80

1.831.982.102.162.252.342.312.342.402.402.402.432.432.43

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

2.492.582.702.822.852.882.882.882.942.912.972.972.972.97

2.803.504.204.905.606.307.007.708.409.009.70

10.4011.1011.80

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

3.483.603.663.693.693.723.783.783.813.813.813.813.813.81

2.803.504.304.905.606.307.007.608.309.009.70

10.4011.1011.80

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

3.783.873.903.963.964.023.994.024.054.024.084.054.054.05

2.803.604.204.905.606.307.007.708.309.009.70

10.4011.0011.80

1.602.403.204.005.20

0.070.150.200.300.35

l l

95100105105105

135150160160160

136. 654. xx. A2 0.7

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

2.403.103.704.304.905.506.106.607.207.808.409.009.60

10.20

5.255.645.796.186.246.276.396.426.456.426.306.246.095.85

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

7.297.447.627.867.928.048.138.138.138.078.047.867.837.59

2.403.103.704.304.905.506.106.707.207.808.409.009.60

10.20

1.201.602.002.402.803.203.604.004.404.805.205.606.00

-

10.1110.2310.3810.4710.5910.5910.6210.6210.6210.5910.5610.5010.35

-

3.103.704.304.905.506.106.707.207.808.409.009.60

10.20-

1.602.002.402.803.203.604.004.404.805.205.606.00

--

11.0711.2211.2811.3111.4311.4611.4311.3711.3711.3411.2211.16

--

3.704.304.905.506.106.607.207.808.409.009.60

10.10--

1.402.203.204.005.00

0.070.150.200.300.35

l l

Ordering no.

Type Mat. no.

316L

SS

Spray angle

EØ

[mm]


351Y

Bra

ss p

late

d<)

B1[mm]

B2[mm]p

Air

[bar

]

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pW

ater

[bar

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

0.07 0.15 0.30 0.35

pA

ir[b

ar]


Example Type + Material no. (xx) = Ordering no.for ordering: 136. 654 xx. A2 + 1Y = 136. 654. 1Y. A2


45°

60°

1.19

. . . . . . . . .

136. 673. xx. A2 1.0

0.601.001.401.802.202.603.003.403.804.204.605.005.405.806.00

5.607.609.40

11.0012.6014.2018.9017.4019.1020.8022.4024.0025.6027.2028.10

13.8914.2814.2814.1013.6813.6213.2912.8712.5712.1811.7910.9510.449.578.97

1.001.401.802.202.603.003.403.804.204.605.005.405.806.00

-

18.5118.5118.3317.9117.3716.6515.9315.0614.5813.8313.0812.3011.5211.04

-

7.609.30

11.0012.7014.2015.9017.3019.0020.8022.3024.0025.6027.2028.10

-

1.602.002.402.803.203.604.004.404.805.205.605.806.00

--

24.8124.6624.4223.5222.4721.3020.1018.7817.5216.7115.6315.1214.76

--

10.2011.7013.3015.1016.6018.4019.8021.5023.2024.8026.4027.3028.00

--

2.002.402.803.203.604.004.404.805.205.606.00

----

26.6126.3125.6524.5723.2821.9320.3419.2018.0617.0115.87

----

11.8013.5015.1016.6018.3019.9021.5023.1024.7026.3028.00

----

1.602.403.204.005.20

0.070.150.200.300.35

115120120120120

160160160165170

l l

136. 682. xx. A2 1.5

1.001.401.802.202.603.003.403.804.204.605.005.405.806.00

7.509.30

11.0012.5014.2015.9017.5019.1020.7022.3023.9025.5027.2028.00

22.4120.1918.7517.8817.1016.4716.0815.9015.9015.8115.2113.9212.0911.07

1.401.802.202.603.003.403.804.204.605.005.405.806.00

-

28.9526.0723.9422.2321.1220.1019.4418.9918.4518.1817.2515.7214.91

-

9.3010.9012.5014.3015.9017.5019.1020.7022.3024.0025.4027.2028.00

1.802.202.603.003.403.804.204.605.005.405.806.00

--

41.2234.9233.1830.4528.2926.6425.3524.2423.1322.1421.1220.67

--

11.1012.6014.2015.9017.5019.1020.7022.3024.0025.5027.2028.00

--

2.002.402.803.203.604.004.404.805.205.606.00

---

44.0439.0935.1632.2230.1828.3226.9425.5924.3623.2822.17

---

11.8013.4015.1016.7018.3019.9021.5023.1024.8026.4028.00

---

1.602.403.204.005.20

0.070.150.200.300.35

110120120120120

155155160165175

l l

136. 664. xx. A2 0.7

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

2.803.504.204.905.606.306.907.608.309.009.70

10.4011.1011.80

5.465.916.156.426.636.756.936.997.057.117.117.177.117.20

1.001.401.802.202.603.003.403.804.204.605.005.405.806.00

7.687.958.138.348.468.588.678.738.768.828.828.828.858.85

3.203.904.605.305.906.607.308.008.709.30

10.1010.7011.4011.80

1.001.401.802.202.603.003.403.804.204.605.005.405.806.00

10.5010.7110.8311.0111.0711.1611.1911.2511.2811.3411.3711.3711.4011.40

3.203.904.605.305.906.607.308.008.609.40

10.0010.7011.4011.70

1.001.401.802.202.603.003.403.804.204.605.005.405.806.00

11.2811.5211.5811.7011.7911.8811.9412.0012.0312.0612.0612.0912.1212.15

3.203.904.505.205.906.607.308.008.709.40

10.1010.7011.4011.80

1.602.403.204.005.20

0.070.150.200.300.35

110130140150155

140160170180200

l l

Ordering no.

Type Mat. no.

316L

SS

Spray angle

EØ

[mm]

Spray dimensions

351Y

Bra

ss p

late

d<)

B1[mm]

B2[mm]p

Air

[bar

]

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pW

ater

[bar

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

0.07 0.15 0.30 0.35

pA

ir[b

ar]

Pneumatic atomizing nozzles,Flat fan, pressure principle, external mixingSeries 136.6


Example Type + Material no. (xx) = Ordering no.for ordering: 136. 664 xx. A2 + 1Y = 136. 664. 1Y. A2


60°

Liquid pressure p [bar]

1.20

A1

A2

A3

1

2

A1

A2

A3

1

2

Liquid supply line

Control air for pneumatic valve

Atomizing air supply line

Pneumatically controlled valveOrdering no. 015. 601. xx. xx (see Page 1.28)

Pneumatic atomizing nozzleOrdering no. 136. 6xx. xx. xx

Cereal dampening in a mixing drum

136. 691. xx. A2 2.5

1.401.802.202.603.003.403.804.204.605.005.405.60

13.8016.3018.8021.3023.7026.1028.6031.0033.4035.8038.3039.40

52.0050.0048.6047.5046.5045.4044.4042.9041.5039.9038.9038.50

2.002.402.803.203.604.004.404.805.205.606.00

-

67.3064.6062.0060.4058.0056.2054.2052.4049.9048.1046.40

-

17.5020.1022.5024.9027.3029.8032.1034.7037.1039.5042.00

-

2.603.003.403.804.204.605.005.405.806.00

--

92.3087.7084.3080.7077.0074.4071.1068.1064.3063.20

--

21.2023.6026.0028.5030.9033.4035.9038.3040.8042.00

--

2.603.003.403.804.204.605.005.405.806.00

--

102.1097.2092.5088.4085.2081.3078.2074.3071.1068.90

--

21.2023.7026.1028.5031.0033.4035.8038.2040.7041.90

--

1.602.403.204.005.20

0.070.150.200.300.35

150160160160150

200205205210210

l l

Ordering no.

Type Mat. no.

316L

SS

Spray angle

EØ

[mm]


351Y

Bra

ss p

late

d<)

B1[mm]

B2[mm]p

Air

[bar

]

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pW

ater

[bar

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

0.07 0.15 0.30 0.35

pA

ir[b

ar]


E = narrowest free cross section (water)Example Type + Material no. (xx) = Ordering no.for ordering: 136. 691 xx. A2 + 1Y = 136. 691. 1Y. A2

60°

Operational information:Liquid flow of pneumatic atomizing nozz-les with external mixing can be turneddown to 0 with air pressure remainingconstant.

1.21


Example Type + Material no. (xx) = Ordering no.for ordering: 166. 115. xx. A2 + 16 = 166. 115. 16. A2


<)

300

150

D2

D1

Series 166.1

166. 115. xx. A2 0.50

0.400.801.20

-----

5.903.801.70

-----

0.300.600.90

-----

1.401.802.202.60

----

5.804.102.201.20

----

0.801.001.401.70

----

2.402.803.203.604.004.404.805.20

9.107.505.904.402.902.001.100.40

1.101.201.501.802.102.502.803.00

3.003.403.804.204.605.005.405.80

11.009.608.206.805.504.102.902.10

1.201.401.601.902.202.502.803.10

0.701.502.003.004.00

6060605555

10095

10095

100l

166. 125. xx. A2 0.50

0.801.201.602.002.402.803.203.604.004.404.80

--

4.704.404.003.503.002.702.001.601.301.000.60

--

1.501.902.302.603.003.203.704.104.504.905.20

--

1.201.602.002.402.803.203.604.004.404.805.205.606.00

7.006.606.205.805.404.904.403.903.503.102.702.301.90

1.802.202.603.003.403.704.104.504.805.205.605.906.30

2.803.203.604.004.404.805.205.606.00

----

9.108.708.408.007.707.307.006.606.20

----

3.303.704.104.504.805.205.605.906.30

----

3.403.804.204.605.005.405.80

------

10.6010.309.909.609.308.908.60

------

3.904.304.605.005.405.806.10

------

1.402.202.803.404.20

0.701.502.003.004.00

5555556060

9095

100100100

l

Ordering no.

Type Mat.no.

303

SS

EØ

[mm]


16

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir

[b

ar]

pW

ater

[bar

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

0.7 1.5 3.0 4.0

. . . . . . . .pA

ir[b

ar]

<)

Spray angle

20°

D2[mm]

D1[mm]

0.801.802.603.204.40

Version with magnetic valve.Fine full cone atomizationand fogging with air or gas.Liquid pressure principle.Internal mixing of fluids. Applications: Humidification of air, cooling.

Technical Data:n Service pressure: 0-6 barn Voltage: 24 V DCn Power: 8 W n Switching frequency:

ca. 500/minn Protective system: IP 67n Ambient temperature:

10°C / +50°Cn Cable length: 1.000 mmn Material of gasket: EPDM

Accessories for series 166please refer to page 1.29

77

22 15

3,5 1/4

BS

PP

37

M4

6 de

ep

1/4 BSPP

WaterAir

Weight brass: 200 gSeries 166.1

1.22




166. 134. xx. A2 0.7

1.201.602.002.402.803.203.604.004.404.805.205.606.00

13.2012.4011.8011.4011.1010.8010.6010.4010.109.909.509.008.50

2.703.303.904.404.905.506.006.507.007.608.108.609.20

2.002.402.803.203.604.004.404.805.205.606.00

--

19.4018.1017.3016.7016.1015.6015.2015.0014.6014.1013.80

--

3.904.404.905.506.006.507.007.608.108.609.10

--

3.003.403.804.204.605.005.405.80

-----

28.3027.5026.7025.9025.0024.2023.6023.10

-----

5.205.706.306.807.307.808.408.90

-----

3.804.204.605.005.405.80

-------

32.6032.0031.3030.6029.9029.30

-------

6.206.807.307.808.408.90

-------

1.802.803.805.206.00

0.701.502.003.004.00

5560606565

95105105110110

l

166. 142. xx. A2 2.5

1.401.802.202.603.003.403.804.204.605.005.405.80

24.2020.4020.0019.3017.6016.5017.0016.3015.1014.0013.1012.40

5.106.307.208.209.30

10.4011.4012.4013.3014.3015.3016.20

1.602.002.402.803.203.604.004.404.805.205.606.00

53.4042.6035.3030.4028.6028.2027.3025.9024.3022.3021.8021.40

4.705.907.208.409.50

10.5011.5012.5013.5014.6015.7016.70

3.203.604.004.404.805.205.606.00

----

70.8062.5055.7049.3044.6041.9040.4039.70

----

8.009.20

10.6011.7012.9014.1015.1016.10

----

3.804.204.605.005.405.80

------

93.2083.1075.3069.0063.4057.50

------

9.2010.1011.3012.5013.7014.90

------

0.801.603.004.006.00

0.701.502.003.004.00

6065606565

100105105110110

l

Ordering no.

Type Mat.no.

303

SS

EØ

[mm]


16

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir

[b

ar]

pW

ater

[bar

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

0.7 1.5 3.0 4.0

. . . . . . . .pA

ir[b

ar]

<)

Spray angle

20°

D2[mm]

D1[mm]

1.23


Version with magnetic valve.Fine full cone atomizationand fogging with air or gas.Especially wide spray angleof 60°. Pressure principle. Internal mixing of fluids. Applications: Humidification of air. cooling.

Technical Datas:n Service pressure: 0-6 barn Voltage: 24 V DCn Power: 8 W n Switching frequency:

ca. 500/minn Protective System: IP 67n Ambient temperature:

10°C / +50°Cn Material of gasket: EPDM




300

D2D1

150

Series 166.2

Series 166.2

60°

166. 215. xx. A2 0.5

1.602.002.402.80

---

5.106.207.208.10

---

25.6017.8011.306.90

---

2.603.003.403.804.204.60

-

44.2033.0024.7018.1013.209.30

-

7.008.209.20

10.2011.2012.00

-

3.604.004.404.805.205.606.00

93.7078.3065.8054.9045.6038.0036.10

7.909.30

10.6011.9013.0014.1014.40

4.204.605.005.405.806.00

-

132.90117.20101.1087.9076.6071.20

-

7.309.00

10.4011.8013.2013.80

-

0.801.00

-------

2.804.30

-------

17.506.00

-------

1.601.802.002.20

-----

25.9014.706.701.90

-----

4.005.306.708.10

-----

3.003.203.403.603.804.00

---

40.4031.5022.2014.608.504.50

---

5.806.908.209.50

11.0012.30

---

3.804.004.204.404.604.805.005.205.40

54.9045.6037.6029.6021.6015.309.706.002.90

6.407.308.509.70

11.2012.4013.8015.2016.50

1.001.201.40

----

1.301.501.80

----

3.001.800.70

----

1.601.802.002.202.402.60

-

5.804.903.802.801.700.80

-

1.701.902.102.302.502.80

-

2.803.203.604.004.404.805.00

8.507.205.704.002.200.800.40

2.402.803.203.604.104.504.60

3.804.204.605.005.405.806.00

9.408.206.905.403.802.301.40

3.103.503.904.204.705.205.60

1.001.602.403.204.20

0.801.602.303.204.20

2.002.602.403.604.20

0.701.502.003.004.00

0.701.502.003.004.00

0.701.502.003.004.00

200230230245250

250245245250245

235245255255265

330380385390410

450465465465465

380415420425430

l

166. 222. xx. A2 1.0

1.4

l

166. 231. xx. A2 l

Ordering no.

Type Mat.no.

303

SS

Spray angle

EØ

[mm]


16

<)

D1[mm]

D2[mm]p

Air

[bar

]

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pW

ater

[bar

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

0.7 1.5 3.0 4.0

. . . . . . . . .pA

ir[b

ar]

77

22 15

3,5 1/4

BS

PP

WaterAir

37

M4

6 de

ep

1/4 BSPP

1.24



Version with magnetic valve.Particularly fine flat fan ato-mization with air or gas.Siphon principle. Internalmixing of fluids. Applications: Web dampening, cooling,humidification of goods.






300150

B2

B1

Series 166.4

Series 166.4


22 15

3,5 1/4

BS

PP

WaterAir

37

M4

6 de

ep

1/4 BSPP

81

166. 462. xx. A2 1.5

1.201.602.002.402.803.203.604.004.40

---

2.603.404.104.805.406.006.607.207.80

---

19.0012.209.407.105.705.003.603.202.20

---

2.002.402.803.203.604.004.404.805.205.605.80

-

22.0018.0014.4011.308.808.106.204.603.201.600.80

-

2.002.402.803.203.603.904.304.604.905.305.40

-

3.003.403.804.204.605.005.405.806.00

---

61.8051.9044.6039.0033.4029.4025.5022.0020.60

---

4.004.805.806.607.408.108.909.609.90

---

3.804.004.204.404.604.805.005.205.405.605.806.00

76.1070.4065.6061.3057.3054.1051.3049.3046.5043.7041.3039.00

4.605.105.505.906.406.707.207.708.208.608.909.30

1.202.403.203.806.00

0.701.502.003.004.00

120120120140145

140170175205205

l

45°

Ordering no.

Type Mat.no.

303

SS

Spray angle

EØ

[mm]


16

<)

B1[mm]

B2[mm]p

Air

[bar

]

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pW

ater

[bar

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

0.7 1.5 3.0 4.0

. . . . . . . . .pA

ir[b

ar]

166. 414. xx. A2 0.7

1.001.201.401.601.80

------

1.301.501.701.902.10

------

7.706.004.202.701.30

------

1.401.601.802.002.202.402.602.803.003.203.40

14.3013.0011.6010.208.907.405.904.603.202.101.10

1.501.601.802.002.202.402.602.803.003.203.40

2.202.603.003.403.804.204.605.005.405.806.00

22.4020.0017.7015.5013.3011.008.806.604.302.501.60

2.002.302.603.003.403.704.104.504.905.305.50

3.003.403.804.204.605.005.405.806.00

--

25.1023.0020.9018.9016.9014.9012.8010.809.80

--

2.502.803.103.503.804.204.605.005.20

--

1.402.403.203.804.60

0.701.502.003.004.00

85100105120130

125145155170210

l

1.25


166. 425. xx. A2 0.5

0801.201.602.002.402.803.00

------

1.201.601.902.302.602.903.10

------

6.505.504.704.003.202.602.20

------

1.401.802.202.603.003.403.804.004.404.805.205.606.00

9.408.707.907.206.405.705.104.804.203.602.802.201.60

1.702.102.402.703.103.403.703.904.204.504.805.105.50

2.402.603.003.403.804.204.605.005.405.806.00

--

13.2012.9012.3011.8011.1010.409.809.208.608.107.80

--

2.502.703.003.403.704.004.304.605.005.305.40

--

2.402.803.203.604.004.404.805.205.606.00

---

16.1015.5015.0014.5013.9013.4012.8012.2011.7011.20

---

2.502.903.203.503.804.104.504.805.105.40

---

1.202.203.003.405.60

0.701.502.003.004.00

155165170200200

195255265330330

l

166. 452. xx. A2 1.5

1.001.401.802.202.602.80

--

3.905.707.008.409.80

10.30--

18.808.607.404.101.000.10

--

1.802.002.202.402.602.80

--

31.0025.4020.1015.5012.4010.40

--

5.306.307.208.008.909.60

--

3.203.604.004.404.805.205.606.00

50.1039.5031.3024.0017.7013.4010.608.60

7.709.40

11.2012.9014.5016.0017.5018.80

3.804.204.605.005.405.806.00

-

70.7058.6048.6041.2033.6027.5024.40

-

8.209.60

11.2013.1014.8016.4017.20

-

1.001.802.603.605.00

0.701.502.003.004.00

130150155175180

185240245280285l

166. 433. xx. A2 0.4

1.001.201.401.60

---

2.002.402.803.20

---

11.608.105.303.70

---

1.802.002.202.402.602.803.00

18.3015.3012.209.807.605.904.40

2.803.203.604.004.304.705.00

3.003.403.804.204.605.005.40

31.0025.4020.6016.3012.509.306.50

3.704.405.105.906.607.308.00

3.804.204.605.005.405.806.00

37.5032.4027.7023.4019.4015.9014.20

4.405.005.706.507.207.908.30

1.402.203.003.805.20

0.701.502.004.004.00

150185205300260

210255300485395

l

Ordering no.

Type Mat.no.

303

SS

Spray angle

EØ

[mm]


16

<)

B1[mm]

B2[mm]p

Air

[bar

]

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pW

ater

[bar

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

0.7 1.5 3.0 4.0

. . . . . . . . .pA

ir[b

ar]

E = narrowest free cross section (water)Example Type + Material no. (xx) = Ordering no.for ordering: 166. 425. xx. A2 + 16 = 166. 425. 16. A2

60°

80°

1.26

Version with magnetic valve.Fine flat fan atomizationwith the aid of air or gas.Liquid pressure principle.External mixing of fluids. Applications: Web dampening, cooling,humidification of goods, atomization of viscous liquids.






300150

B2

B1

Series 166.6

Series 166.6

22 15

73 3,5

1/4 BSPP

WaterAir

37

1/4

BS

PP

M4

6 de

ep


45°

166. 616. xx. A2 0.4

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

2.503.103.704.304.905.506.106.707.307.908.509.109.60

10.20

1.681.801.922.102.072.192.192.222.222.222.222.222.222.22

0.801.001.401.802.202.603.003.604.004.404.805.205.606.00

2.432.462.582.612.762.732.732.762.762.762.762.762.762.73

2.402.903.604.204.805.406.006.707.307.908.509.109.70

10.20

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

3.423.483.513.633.633.633.633.663.693.693.693.663.663.66

2.503.103.704.304.905.506.106.707.307.908.409.109.60

10.20

1.001.401.802.202.603.003.403.804.204.605.005.405.806.00

3.693.813.873.843.903.933.903.933.963.933.933.933.873.87

2.803.404.004.605.205.806.407.007.608.208.809.40

10.0010.20

1.402.203.204.005.00

0.070.150.200.300.35

80909095

100

115130135145145

l

95100105105105

135150160160160

166. 654. xx. A2 0.7

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

2.403.103.704.304.905.506.106.607.207.808.409.009.60

10.20

5.255.645.796.186.246.276.396.426.456.426.306.246.095.85

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

7.297.447.627.867.928.048.138.138.138.078.047.867.837.59

2.403.103.704.304.905.506.106.707.207.808.409.009.60

10.20

1.201.602.002.402.803.203.604.004.404.805.205.606.00

-

10.1110.2310.3810.4710.5910.5910.6210.6210.6210.5910.5610.5010.35

-

3.103.704.304.905.506.106.707.207.808.409.009.60

10.20-

1.602.002.402.803.203.604.004.404.805.205.606.00

--

11.0711.2211.2811.3111.4311.4611.4311.3711.3711.3411.2211.16

--

3.704.304.905.506.106.607.207.808.409.009.60

10.10--

1.402.203.204.005.00

0.070.150.200.300.35

l

Ordering no.

Type Mat.-no.

303

SS

Spray angle

EØ

[mm]


16

<)

B1[mm]

B2[mm]p

Air

[bar

]

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pW

ater

[bar

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

0.07 0.15 0.30 0.35

. . . . . . . . .pA

ir[b

ar]

1.27


. . . . . . . . .

859090

100105

135140140145150

166. 626. xx. A2 0.4

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

2.803.604.304.905.606.307.007.608.409.009.70

10.4011.2011.80

1.831.982.102.162.252.342.312.342.402.402.402.432.432.43

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

2.492.582.702.822.852.882.882.882.942.912.972.972.972.97

2.803.504.204.905.606.307.007.708.409.009.70

10.4011.1011.80

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

3.483.603.663.693.693.723.783.783.813.813.813.813.813.81

2.803.504.304.905.606.307.007.608.309.009.70

10.4011.1011.80

0.801.201.602.002.402.803.203.604.004.404.805.205.606.00

3.783.873.903.963.964.023.994.024.054.024.084.054.054.05

2.803.604.204.905.606.307.007.708.309.009.70

10.4011.0011.80

1.602.403.204.005.20

0.070.150.200.300.35

l

Ordering no.

Type Mat.-no.

303

SS

Spray angle

EØ

[mm]


16

<)

B1[mm]

B2[mm]p

Air

[bar

]

pA

ir[b

ar]

pA

ir[b

ar]

pA

ir[b

ar]

pW

ater

[bar

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

VW

ater

[l / h

]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

Vn

Air

[m3

/ h]

0.07 0.15 0.30 0.35

pA

ir[b

ar]

E = narrowest free cross section (water)Example Type + Material no. (xx) = Ordering no.for ordering: 166. 654. xx. A2 + 16 = 166. 654. 16. A2

60°

166. 682. xx. A2 1.5

1.001.401.802.202.603.003.403.804.204.605.005.405.806.00

7.509.30

11.0012.5014.2015.9017.5019.1020.7022.3023.9025.5027.2028.00

22.4120.1918.7517.8817.1016.4716.0815.9015.9015.8115.2113.9212.0911.07

1.401.802.202.603.003.403.804.204.605.005.405.806.00

-

28.9526.0723.9422.2321.1220.1019.4418.9918.4518.1817.2515.7214.91

-

9.3010.9012.5014.3015.9017.5019.1020.7022.3024.0025.4027.2028.00

1.802.202.603.003.403.804.204.605.005.405.806.00

--

41.2234.9233.1830.4528.2926.6425.3524.2423.1322.1421.1220.67

--

11.1012.6014.2015.9017.5019.1020.7022.3024.0025.5027.2028.00

--

2.002.402.803.203.604.004.404.805.205.606.00

---

44.0439.0935.1632.2230.1828.3226.9425.5924.3623.2822.17

---

11.8013.4015.1016.7018.3019.9021.5023.1024.8026.4028.00

---

1.602.403.204.005.20

0.070.150.200.300.35

110120120120120

155155160165175

l

166. 691. xx. A2 2.5

1.401.802.202.603.003.403.804.204.605.005.405.60

13.8016.3018.8021.3023.7026.1028.6031.0033.4035.8038.3039.40

52.0050.0048.6047.5046.5045.4044.4042.9041.5039.9038.9038.50

2.002.402.803.203.604.004.404.805.205.606.00

-

67.3064.6062.0060.4058.0056.2054.2052.4049.9048.1046.40

-

17.5020.1022.5024.9027.3029.8032.1034.7037.1039.5042.00

-

2.603.003.403.804.204.605.005.405.806.00

--

92.3087.7084.3080.7077.0074.4071.1068.1064.3063.20

--

21.2023.6026.0028.5030.9033.4035.9038.3040.8042.00

--

2.603.003.403.804.204.605.005.405.806.00

--

102.1097.2092.5088.4085.2081.3078.2074.3071.1068.90

--

21.2023.7026.1028.5031.0033.4035.8038.2040.7041.90

--

1.602.403.204.005.20

0.070.150.200.300.35

150160160160150

200205205210210

l

Accessories for pneumatic atomizing nozzlesSeries 136.1 - 136.6

1.28Example Type + Material no. (xx) = Ordering no.for ordering: 013. 601. xx. 10 + 16 = 013. 601. 16. 10

Quick-cleaning device

6268

D

SW 18

UNF 5/16”-24

Pneumatically controlled valve.Opening pressure 2.1 bar, max. 180 cycles/min.

46

31

Air connection

1/8 NPT

UNF 5/16”-24D

Regulating device and shutting-off needle:

42,533,5*

UNF 5/16”-24

UNEF 9/1”-24

SW 11/16 AF

* max. geöffneter Zustand

SW 18

Regulating device with quick-cleaning needle

6268

D

SW 18

UNF 5/16”-24

Weight brass: 51 g

Weight brass: 120 g

Weight 303 SS: 33 g

Weight brass: 75 g

Ordering no.

For nozzlesType Mat. no.

303

SS

3516

Bra

ss

plat

ed

013. 601. xx. 20013. 602. xx. 20013. 603. xx. 20013. 604. xx. 20013. 605. xx. 20013. 606. xx. 20

136. xx1136. xx2136. xx3136. xx4136. xx5136. xx6

Needle diameter D

[mm]

2.11.20.80.60.40.3

015. 600

Ordering no.


303

SS

3516

Bra

ss

plat

ed013. 601. xx. 10013. 602. xx. 10013. 603. xx. 10013. 604. xx. 10013. 605. xx. 10013. 606. xx. 10

136. xx1136. xx2136. xx3136. xx4136. xx5136. xx6

Needle diameter D

[mm]

2.11.20.80.60.40.3

Ordering no.

Type Mat. no.

303

SS

16

Ordering no.


303

SS

3516

Bra

ss

plat

ed

013. 601. xx. 30013. 602. xx. 30013. 603. xx. 30013. 604. xx. 30013. 605. xx. 30013. 606. xx. 30

136. xx1136. xx2136. xx3136. xx4136. xx5136. xx6

Needle diameter D

[mm]

2.11.20.80.60.40.3

For all nozzlesof the series 136

Hex

Hex

*max. opened

Hex 18

Hex 18

1.29

Accessories for pneumatic atomizing nozzlesSeries 136 und 166

Angled screwed connection for hose diameter 6 mm

Ø 6

25

8

Hex 16

1/4 BSPP

26

Screwed connection for hose diameter 6 mm

Hex 13

Ø 6

1/4 BSPP

24

8

Screwed connection for hose diameter 8 mm

Hex 15

Ø 8

1/4 BSPP

26

8

Angled screwed connection for hose diameter 8 mm

25

8

Ø 8

Hex 16

1/4 BSPP

27.5

Material: Brass platedWeight: 12 g



Material: Brass platedWeight 35 g

095. 016. 35. 11. 79. 0

Ordering no.For all nozzles

of the series 136 and 166

095. 016. 35. 13. 13. 0



095. 016. 35. 11. 80. 0



095. 016. 35. 13. 14. 0



Particularly fine full coneatomization. Siphon princi-ple. Internal mixing of fluids.Integrated regulating device.Applications: Lubrication, cooling, humidifi-cation of air.

Pneumatic atomizing nozzles, Full cone, siphon principle, internal mixing Series 140

Ordering no.

Spray angle

V W = Liquid Vn L = AirEØ

[mm]

Hs

Aspiration-height

Air

Wat

er

20°-30° 140. 252. 30. 01

<)

0.750.50500200

-4.50

-2.50

4.507.00

4.004.00

8.0010.00

6.006.00

10.5012.00

[mm WS]

W

[l/h]

L

[m3/h]

W

[l/h]

L

[m3/h]

W

[l/h]

L

[m3/h]

W

[l/h]

8.008.00

L

[m3/h]

. .

p [bar] Air pressure0.5 1.0 2.0 3.0


Weight brass: 70 g

Nipple014. 010. 30. 04(Material brass)Weight: 17 g

Accessories:

Gasket014. 040. 727.8 x 12 x 1 (EWP 210)

Assembly scheme

1.30

Air

Water

1.31

The ViscoMist™ series offersindependent regulation ofboth atomizing air and fanair, which provides the userwith infinite control over theviscous fluid’s spray patternand droplet size.

The ViscoMist™ nozzle features a standard ‘LiquidShut-Off/ Clean-Out Needle’function. This design elementactivates and deactivates theliquid supply, while simul-taneously removing excessfluid from the fluid nozzle preventing clogging. This feature is especially vital whenthe viscous liquids are beingapplied in continuous processenvironments.

The modular design of theViscoMist™ allows maximumflexibility to meet the exactspray requirements.

Interchangeable air caps andvarious flow capacities areavailable to suit any sprayingapplication needs.

Nozzle body configurations

One nozzle – three spraycharactersn - Solid stream

- Full cone- Flat fan

n Independent regulation ofliquid, atomizing air andfan air

n Fluid circulation possible(Nozzle body with 5 connections)

Atomizing air / Fan air / Signal airThe atomizing air causes theliquid to atomize at the nozzleorifice. The spray charactercan be adjusted with the fanair to suit the application. Thesignal air activates the nozzle.

Outside mixing to spray viscous liquids, for example:n Coatingn Moisturisingn Lubricationn Glazingn Sanitising

Fluid cap optionsØ 0.38 mm to 2.54 mm

Valve positionNormally closed, fail-safe withloss of air

Signal air pressureMin. 2 barMax. 3 bar

Cycles per minute(short term):180 cycles / min

Material1Y (316L SS)

Ports01 (1/8“ NPT (F))11 (1/8“ BSPP (F))

Flow rate rangen Water: 7.8 to 307 l/h,

at 2 barn Air: 7.5 to 28.4 m3/h i.N.,

at 2 bar

Pneumatic atomizing nozzles,for atomizing viscous mediaSeries 176 ViscoMist™

Nozzle body configuration 2 Nozzle body configuration 4 Nozzle body configuration 5

8681

48,4

Ø 39,4Hex 13

Hex 41

Atomizing Air / Fan Air

Signal Air Liquid

Atomizing Air

Fan Air

Signal Air

Signal Air

Liquid

Atomizing Air

Fan Air

LiquidLiquid

4 connections3 connections 5 connections

Further information andordering data on request.

pneumatic atomizing nozzlesnozzle range. criteria for selecting pneu-matic atomizing nozzles 1....

Documents