RESTECH NORWAY A/S PLT® PNEUMATIC LINE THROWERS

SAFETY, SURVIVAL & RESCUE

Street Address: Jordbruksveien 41 N-8007 Bodø Norway

Postal address P.O.Box 624 N-8001 Bodø Norway

Telephone: ℡

Int+ 47 7554 2440

Facsimile:

Int+ 47 7554 2441

E-mail: Restech@restech.no

PNEUMATIC LINE THROWERS

• The PLT® is a line throwing system based on compressed air as propellant.

• No flames or sparks when

used. Ideal for use in Oil and Gas environments.

• All projectiles are re-useable. • Easy aiming and very

directional, even in heavy side-wind.

• Long life. Made of materials

with long durability in maritime environments.

• Low cost use. Refilling of

compressed air is all you need. • The various launching tubes

fits the same base unit and gives you access to a range of different projectiles for different applications.

We also have a smaller shoulder launched model that operates with air or CO2. And with a variety of projectiles

http://www.restech.no

Enterprice no: NO 951274763 MVA

RESTECH NORWAY A/S PLT® PNEUMATIC LINE THROWERS SAFETY, SURVIVAL & RESCUE

Street Address:

Jordbruksveien 41

N-8007 Bodø

Norway

Postal address

P.O.Box 624

N-8001 Bodø

Norway

Telephone: ℡

Int+ 47 7554 2440

Facsimile: �

Int+ 47 7554 2441

E-mail:

Restech@restech.no

http://www.restech.no

Enterprice no:

NO 951274763 MVA

PLT - Rescue 230

0575/05 Art no 2000

Description: Meets the demands of Solas/IMO regulation 74/83, and recognised by Det Norske Veritas, Notified Body No: 0575 (EU-Approval NO: MED-B-2416), and similar organisations in other countries as a line-throwing appliances onboard ships.

Base unit : The base unit contains a built-in air cylinder for filling of compressed air up to 200/300 bars (2900/4350psi). This is sufficient for 4/6 shots before refilling is necessary. The air cylinder is fitted with standard fittings for diving and BA-equipment for filling of dry clean air from a high-pressure compressor. Projectiles : Delivered with four Rescue Projectiles and one Training Projectile. The Rescue Projectiles are made of ABS plastic with aluminium inner tube. The Rescue Projectiles are filled with 240m (263yd) nylon line, and can be re-loaded and re-used. The Training Projectile is made of POM-plastic with a rubber tip. It does not carry the line inside, but a linebox with 120m/5mm (131yd/0.2in) line is enclosed for training. Loading-device: Delivered with injector w/handle for reloading the Safety-line into the Rescue projectiles. Simply connect to compressed air 5-10 bars (72-145psi) and the line is easily injected into the projectile.

Technical data: Contents: Shooting range min 230m (252yd) 1 Art no 1005 PLT Basic with Air Cylinder Line Strength min 2000N 1 Art no 1303 Launching Tube R-230 Line thickness 3,2mm (0.13in) 4 Art no 2101 Projectile Rescue R-230 compl. w/ lines Recoil max 5400N 1 Art no 2200 Loading Device complete Flight time approx. 4 sec 1 Art no 3303 Launching Tube Training

1 Art no 7004 Training Projectile 1 Art no 6201 Linebox w/ 120m/5mm (131yd/0.2in) line (4400N)

1 CD/Users Manual

THIS MODEL IS TYPE APPROVED IN ACCORDANCE WITH SOLAS/IMO 74/83 DEMANDS. (EC-CERTIFICATE NO: MED-B-2416)

RESTECH NORWAY A/S PLT® PNEUMATIC LINE THROWERS

SAFETY, SURVIVAL & RESCUE

Street Address:

Jordbruksveien 41

N-8007 Bodø

Norway

Postal address

P.O.Box 624

N-8001 Bodø

Norway

Telephone: ℡

Int+ 47 7554 2440

Facsimile: �

Int+ 47 7554 2441

E-mail:

Restech@restech.no

http://www.restech.no

Enterprice no:

NO 951274763 MVA

PLT - Rescue 125

Art no 3000 Description: Line Throwing device with Rescue Projectiles. Intended used for smaller vessels that do not require a line throwing device complying with the Solas regulation.

Base unit : The base unit contains a built-in air cylinder for filling of compressed air up to 200/300 bars (2900/4350psi). This is sufficient for 4/6 shots before refilling is necessary. The air cylinder is fitted with standard fittings for diving and BA-equipment for filling of dry clean air from a high-pressure compressor.

Projectiles : Delivered with four Rescue Projectiles and one Training Projectile. The Rescue Projectiles are made of ABS plastic with aluminium inner tube. The Rescue Projectiles are filled with 170m (186yd) nylon line, and can be re-loaded and re-used. The Training Projectile is made of POM-plastic with a rubber tip. It does not carry the line inside, but a linebox with 120m/5mm (131yd/0.2in) line is enclosed for training.

Loading-device: Delivered with injector w/handle for reloading the Safety-line into the Rescue projectiles. Simply connect to compressed air 5-10 bars (72-145psi) and the line is easily injected into the projectile.

Technical data: Contents: Shooting range min 140-160m (153-175yd) 1 Art no 1005 PLT Basic with Air Cylinder Line strength min 2000N 1 Art no 3303 Launching tube R125 Line thickness 3,2mm (0.13in) 2 Art no 3101 Projectile Rescue 125 Flight time ca. 4 second 1 Art no 7004 Projectile Training Recoil max 5400N 1 Art no 6201 Linebox w/ 120m/5mm (131yd/0.2in) line (4400N)

1 Art no 3200 Loading Device complete R 125 1 CD/Users Manual

RESTECH NORWAY A/S PLT® PNEUMATIC LINE THROWERS

SAFETY, SURVIVAL & RESCUE

Street Address:

Jordbruksveien 41

N-8007 Bodø

Norway

Postal address

P.O.Box 624

N-8001 Bodø

Norway

Telephone: ℡

Int+ 47 7554 2440

Facsimile: �

Int+ 47 7554 2441

E-mail:

Restech@restech.no

http://www.restech.no

Enterprice no:

NO 951274763 MVA

PLT - Mooring 150

Art no 5000

Description: The Mooring 150 is intended used as a working tool for establishing line connections from boat to boat, boat to dock or pier etc.

Base unit : The base unit contains a built-in air cylinder for filling of compressed air up to 200/300 bars (2900/4350psi). This is sufficient for 4/6 shots before refilling is necessary. The air cylinder is fitted with standard fittings for diving and BA-equipment for filling of dry clean air from a high-pressure compressor.

Projectile: The device is delivered with two projectiles M150. Made from white POM-plastic with a rubber tip. The projectile floats. As standard it comes with a Linebox with 3,2mm (0.13in) line, but there are several options regarding the line. Recommended line for mooring operations is art no 6203 containing 120m/5mm (131yd/0.2in) HMPE-line with a breaking strength of approx. 1.900kg (4190lb).

Technical data: Shooting range depending on type of line.

Ex: 3,2mm-1kg/250m (0.13in-4.4lb/274yd) gives a length of max 130m. Recoil max 5400N.

Contents: 1 Art no 1005 PLT Basic with Air Cylinder 1 Art no 3303 Launching Tube M 150 2 Art no 7004 Projectiles Mooring 150 1 Art no 5202 Line box-150 (150 metres (164yd) of 3,2mm (0.13in) braided polypropylene,

breaking strength 2000N (440lb). Other options of line on request) 1 CD/Users Manual.

RESTECH NORWAY A/S PLT® PNEUMATIC LINE THROWERS

SAFETY, SURVIVAL & RESCUE

Street Address:

Jordbruksveien 41

N-8007 Bodø

Norway

Postal address

P.O.Box 624

N-8001 Bodø

Norway

Telephone: ℡

Int+ 47 7554 2440

Facsimile: �

Int+ 47 7554 2441

E-mail:

Restech@restech.no

http://www.restech.no

Enterprice no:

NO 951274763 MVA

PLT - Mooring 75

Art no 6000

Description: The Mooring 75 has been designed for establishing a line connection between vessels, and for docking. The soft PVC-ball projectile will cause minimal damage if objects are hit. The ball is partly filled with air and partly with a coolant preventing it to freeze in arctic areas.

Base unit : The base unit contains a built-in air cylinder for filling of compressed air up to 200/300 bars (2900/4350psi). This is sufficient for 4/6 shots before refilling is necessary. The air cylinder is fitted with standard fittings for diving and BA-equipment for filling of dry clean air from a high-pressure compressor.

Projectile: The PLT Mooring-75 is delivered with two soft PVC ball-projectiles partly filled with coolant to prevent freezing. The colour is orange and they are equipped with an attachment lug for fastening the line. The line-weight must not exceed 1,5kg/100m (3.3lb/109yd). We recommend using Linebox-75 or Linebox-75 HMPE for these projectiles.

Technical data: Shooting range Depending on the line. When using a 5mm (0.2in) braided HMPE, max. 90m. Recoil Max 5400N

Contents: 1 Art no 1005 PLT Basic with Air Cylinder 1 Art no 6303 Launching Tube M 75 2 Art no 6101 Plastic Ball projectiles 1 Art no 6201 Linebox75 containing 120m/5mm (131yd/0.3in) braided polypropylene, breaking strength 4400N 1 CD/Users Manual.

RESTECH NORWAY A/S PLT® PNEUMATIC LINE THROWERS

SAFETY, SURVIVAL & RESCUE

Street Address: Jordbruksveien 41 N-8007 Bodø Norway

Postal address P.O.Box 624 N-8001 Bodø Norway

Telephone: ℡

Int+ 47 7554 2440

Facsimile:

Int+ 47 7554 2441

E-mail: Restech@restech.no

PLT® - Mini Rescue Projectile

http://www.restech.no

Enterprice no: NO 951274763 MVA

General projectile with attachment for light-stick

Grapnel for pick-up Automatic inflatable Rescue Buoy TITAN grapnel for entering that can be launched 75 meters (82yd) constructions

MINI Base unit

Heavy Duty water-proof suitcase Description: The PLT® Mini has been designed as a light tool to establish a line connection and life saving purposes. It is ideal for smaller boats with a need for line establishment up to 90 meters. Can be equipped with different projectiles depending on the use. Can be used either with CO2 cartridges or compressed air. Special all-black versions available for Special Forces. Propellant, Air or CO2: The Mini can be used either with disposable 32grams CO2 cartridges or compressed air from a high pressure source such as a small cylinder. For professional users, the compressed air option is recommended. Projectiles: The PLT® Mini can be equipped with the projectiles shown on the picture. This means that the equipment package can be tailored to fit the users exact needs. Available is also a waterproof, heavy duty suitcase for storing and handling.

Technical data: Shooting range Depending on projectile and line, from 50 to 100 meters. Recoil As a light shotgun

RESTECH NORWAY A/S PLT® PNEUMATIC LINE THROWERS

SAFETY, SURVIVAL & RESCUE

Street Address: Jordbruksveien 41 N-8007 Bodø Norway

Postal address P.O.Box 624 N-8001 Bodø Norway

Telephone:

Int+ 47 7554 2440

Facsimile

Int+ 47 7554 2441

E-mail: Restech@restech.no

Art no. 4050 Line Retrieval Mini. Users are typically those in need of picking up a pilot line or retrieval of equipment. Medium to heavy operations. (Typical users are Seismic / Oceanographic ships)

• Uses compressed air or CO2 as propellant. No sparks or flames. • All parts are re-useable except CO2 cartridges. • Low maintenance and high accuracy. • Effective up to 70 meters under ideal conditions. • Easy maneuverability as it is shoulder launched

CONTENTS:

Art no Text Pcs Picture

4020

Base unit PLT Mini. Shoulder held.

1

4100

Water proof container in heavy duty plastic. Easy storage and easy handling. Air and water tight. It even floats in the water. The color is available in orange from our stock. Internal dim. 580x440x220 mm, External dim. 650x510x242mm.

1

4114

Closed grapple for line-pick-up for PLT Mini. The closed ends ensures that the line does not fall out. Made from Stainless Steel and plastic.

2

4202

Linebox containing of safety line (Breaking strength 190 kg). Reloads using loading device Art no 4200.

3

4200

Loading device for reloading the line in to Linebox R-75 Art no 4202. Connects to compressed air 5-10bars (72-145psi).

1

http://www.restech.no

Enterprice no: NO 951274763 MVA

RESTECH NORWAY A/S PLT® PNEUMATIC LINE THROWERS

SAFETY, SURVIVAL & RESCUE

Street Address: Jordbruksveien 41 N-8007 Bodø Norway

Postal address P.O.Box 624 N-8001 Bodø Norway

Telephone:

Int+ 47 7554 2440

Facsimile

Int+ 47 7554 2441

E-mail: Restech@restech.no

Additionally you need one of the following propellant options: a) CO2:

4006

Disposable CO2 cartridges. Comes in 5-packs. Note that these can be shipped by surface mail and air cargo only.

5 x 5

b) Compressed air:

4207

Quick coupling for using the PLT Mini with air. Fits any standard 5/8" diving cylinder. Takes the pressure down to suitable level. Includes safety valve. Recommended equipment for professional users.

1

1306

Air Cylinder w/ closing valve. 1,45 liter (50 fl oz). Work pressure 300bars/4350psi. With this 1,45 l air cylinder, you will get more than 25 shots before re-filling is necessary.

1

1307

Same as Art No 1306, but certified for the US and Canadian market. Please specify this when ordering.

1

USA/Canadian version Ordering examples for complete systems: a) 1 art no 4050 Line Retrieving Kit Mini

5 art no 4006 5 pack CO2 cartridges Or b) 1 art no 4050 Line Retrieving Kit Mini

1 art no 4207 Quick Coupling for air use 1 art no 1306 Air Cylinder

http://www.restech.no

Enterprice no: NO 951274763 MVA

RESTECH NORWAY A/S PLT® PNEUMATIC LINE THROWERS

SAFETY, SURVIVAL & RESCUE

Street Address: Jordbruksveien 41 N-8007 Bodø Norway

Postal address P.O.Box 624 N-8001 Bodø Norway

Telephone:

Int+ 47 7554 2440

Facsimile

Int+ 47 7554 2441

E-mail: Restech@restech.no

Art no. 5050 Line Retrieval Kit Heavy Duty. Users are typically those in need of picking up a pilot line or retrieval of equipment. Medium to heavy operations.

• Uses compressed air or as propellant. No sparks or flames. • All parts are re-useable. Filling of compressed air every 6th shot. • Low maintenance and high accuracy. • Effective up to 90 meters under ideal conditions.

CONTENTS: Art no Text Pcs Picture

1005 Base unit with air cylinder and cover. 1

1006 Same as Art No 1005, but certified for the US and Canadian market. Please specify when ordering.

1

U SA/Canadian version

1502 Pivot Support. Recommended used for a safer handling of the PLT. Fits in to the Pivot Tube.

1

1503 Pivot Tube. Shall be welded on the rail at conveniant spots for firing.

2

3303 Launching Tube 2

7002

Closed graple for line-pick-up. The closed ends ensures that the line does not fall out. Made from Stainless Steel and plastic. Heavy Duty.

2

http://www.restech.no

Enterprice no: NO 951274763 MVA

RESTECH NORWAY A/S PLT® PNEUMATIC LINE THROWERS

SAFETY, SURVIVAL & RESCUE

Street Address: Jordbruksveien 41 N-8007 Bodø Norway

Postal address P.O.Box 624 N-8001 Bodø Norway

Telephone:

Int+ 47 7554 2440

Facsimile

Int+ 47 7554 2441

E-mail: Restech@restech.no

6203 Linebox containing 120 m of line with breaking strength up to 1.800 kg, HMPE

3

9300

Water proof container in heavy Duty plastic. Easy storage and easy handling. The color is available in orange from our stock. There are wheels on the container for easy transportation. Air and water tight. It also floats.

1

Ordering examples: 1 art no 5050 Line Retrieving Kit for USA/Canada market Or 1 art no 5050 Line Retrieving Kit standard market

http://www.restech.no

Enterprice no: NO 951274763 MVA

The Resque Egg

P.O. Box 624, Jordbruksveien 41, N-8001 Bodø, Norway • Enterprise no: NO 951 274 763 MVATel: (+47) 75 54 24 40 • Telefax: (+47) 75 54 24 41 • E-mail: restech@restech.no • www.restech.no

• Man over board (MOB) situation

• Just aim and throw

• Can easily be thrown 20-30 meters

• Stored in a sealed plastic bag

• Takes up no space and can be stored almost anywhere for immediate operations

• Infl ates automatically when exposed to water

• Cover acts as sea anchor

• Buoyancy 155N – 3 times more than requirements

of EN 393

• Will be on the market early 2005

™

RESTECH NORWAY A/S PLT

® PNEUMATIC LINE THROWERS

SAFETY, SURVIVAL & RESCUE

Street Address:

Jordbruksveien 41

N-8007 Bodø

Norway

Postal address

P.O.Box 624

N-8001 Bodø

Norway

Telephone: ℡

Int+ 47 7554 2440

Facsimile: �

Int+ 47 7554 2441

E-mail:

Restech@restech.no

http://www.restech.no

Enterprice no:

NO 951274763 MVA

PNEUMATIC LINE THROWERS

PIVOT SUPPORT

Fig 1 Fig 2 Due to the heavy recoil it is necessary to have a good support for the PLT�. The back of the PLT

® can be used as

support. But we will recommend use of the Pivot Support (fig 1). With the Pivot Support come pivot pins, nylon washers and screws for fastening it to the PLT

® according to fig.3 on next page.

A steel tube shown on fig 2 shall be welded or clamped at the launching area (rail, i.e.), to a secure point that withstands recoil up to 5300 N. Tubes can be installed at different places on board. Art no 1502 Pivot Support incl. pivot pins, nylon washers and screws. Art no 1503 Tube for Pivot Support.

Figure 3 showing how the Pivot Support is mounted. The cover and air cylinder is removed. Pivot pins, Nylon Washers and 6mm Screws are included in the Pivot Support, art no.1502. The screws must be fastened by using thread glue as Loctite-270, or similar.