polyflake europe presentation 10 feb 2021

. PolyFlake® EUROPE bv .

Global Technology Providers

Anti-Corrosion and Coating

- - POLYFLAKE®

- - POLYTUBE®

- - POLYGLIDE®

. POLYFLAKE® - POLYTUBE® - POLYGLIDE® since 1987 .

MIAMI

ROTTERDAM

SHANGHAIBy Spring 2021

PolyFlake Offices with Workshops and Warehouse for a Global

Service and Product Network

PolyFlake® EUROPE bv PolyFlake® - PolyTube® - PolyGlide® since 1987

1. PolyFlake – An extremely Hard Inert Anti-Corrosion Coating, protecting any type of steel, alloys and any other material that can see corrosion/erosion by seawater or any other substances like Chemicals and Acids. The lifetime Corrosion-protection System for your vessel. Anywhere on your vessel as well as equipment and machinery

2. PolyTube - is a Pipe-lining system with a lifetime durability of 25 years. Extremely suitable for all pipe applications / systems. PolyTube is highly acid and chemical resistant as well as up to 300 degree Celsius resistant. The first applications have been in operation since 1987 without interruptions.

3. PolyGlide – Anti Marine Growth Technology – PolyGlide is a Revolutionary NEW Hard-coat Technology. Non-Toxic as well as an Environment-friendly Anti-Marine growth system – able to protect the vessel for its lifetime.

àHigh Hullcoating Efficiency Performance Characteristics, which will reflect in Extreme Fuel Efficiency and therefore incurring considerable Fuel-Cost Savings.

PolyFlake started operations in 1987 with the aim to provide corrosion protection for steel surfaces. Over time the company has evolved in Corrosion and Coating Technology Developers. As part of the growth, the PolyFlake group has also added expansive workshops to support the clients with the best revision and repair service for machinery like pumps, hoppers, deck equipment, shafts, etc.In 2020, the Rotterdam area workshop was elevated to the commercial and operational epicenter for the Global market with the aim of servicing

Shipowners and Shipmanagers as well as the Petrochemical Industry. Currently there is about 40 staff spread over Rotterdam and Miami. A further 12 to 15 men will be joining in the Shanghai branch by the end of 2021. All 3 location will offer the full line of products including the workshop services for reconditioning, repair and coating works.

Product lines

Coating and Corrosion Technology from the 21st century – we are ever-there to protect your investment…

GUARANTEED.


- Very-longterm corrosion protection

- Polyflake coating systems applied on the hull (Hard Coat)

- Protection from Chemical / Acid corrosion of OVBD pipes and diffusers of gas scrubber systems,

- Protection of any surface against Chemicals – Acids – Seawater – etc.

- Simple repair process / Fast curing / 100% efficient

- Hull coat – Deck coat – ER – Funnel - Deck equipment - etc

- Ballast Tank Coating – Tank Coating – Void Space coating

- High temperature resistant +300 degree Celsius

1. PolyFlake – the coating technologyThe PolyFlake coating family is consisting of the following products;- PolyFlake 110- PolyFlake 220- PolyFlake 330

- PolyFlake 440- PolyFlake 550- PolyFlake Superchem 2910


2. PolyTube – Pipe Lining Technology

The PolyTube Reverse Lining System family is consisting of the following products;- PolyTube – (Sea)Water, Chemical and Acid resistand / up to 90 degrees Celsius- PolyTube Superchem - Extremely (Sea)Water, Chemical and Acid resistand / up

to 300 degrees Celsius

- Lifetime corrosion protection on any type of pipeline

- Protection from Chemical / Acid / Corrosion of Scrubber feedlines, Scrubber exit lines,- Installed in situ – without dismantling or hotworks – 1 access point at the beginning and

1 at the end – potentially passing through many compartments and spaces- BWTS pipe line, Cargo lines, Fire lines, Potable water lines, Fuel lines, etc.

- No more GRE lines required- No more Galvanizing of pipelines- High temperature resistant +300 degree Celsius- Pressure tested for some projects at 16 bar- Diameter of 3 inch (75mm) up to 24 inch (600mm) or more

- up to 100m in one operation – up to 1200m / day / team- Adding 4-5mm wall thickness to the pipe- Installation during Vessel operations or Docking period- Clean and worry-free

- Easily repairable - Lifetime Warranty

The first in place Reverse Lining System - Fast installation time and Cost-effective

Suitable for New and Exisitng pipe systems


2. PolyTube – Pipe Lining Technology

ßFrom this

To this à

In a matter of minutes

- Fast curing- Fully operational

within 12 – 24 hours

- Chemical-Resistant- Acid-Resistant- Corrosion-Protection

- Up to 300 degrees Celsius resistant

Coating and Corrosion Technology from the 21st century – we are ever-there to protect your investment… GUARANTEED.


- Eco Friendly as PolyGlide antifouling does NOT shed off

- Non Toxic- PolyFlake Base coat at 850 to 950 micron DFT- PolyGlide Top coat at 120 micron DFT- Potentially compatible with existing basecoat

- Ideal for all areas of the hull, Rudder, Icebelt, Bowthruster-tunnel, Seachests, Moonpool, etc.

- Fouling will not be able to attach to the hull in-between the

docking intervals – during the drydocking à just HP wash down.- Depending on the vessel operations, 1 hull cleaning every 12

months to 18 months should be considered in order to achieve the best performance

- 400% more coating layer adhesion compared to any other

coatings on the market.- PolyGlide is ideal for ANY VESSEL - new building or existing

vessels (existing coating).- Fuel savings are the consequential result of Minimal or even

neglectable Marine growth.

3. PolyGlide – Corrosion protection and Antifouling HULL COATINGPOLYFLAKE® & POLYGLIDE® Underwater Hard-Coating Systems- High performance long term Anti Corrosion Protection- High performance Anti Marine Growth Protection

- Most environmental-friendly anti marine growth technology- Apply the Base coat à PolyFlake- Apply the Top coat à PolyGlide

HULL

Ice shock and friction

Cavitation

Erosion

Galvanic corrosion

Chemical corrosion

Osmosis

Fouling

Pricing:- The savings compared to conventional

antifouling and silicon-based coating systems is starting as from the moment PolyGlide is applied on the hull.

- With every Dry-docking of your vessel, the savings are mounting up even further.

HULL

Shop-primer PolyFlake + PolyGlide


PolyFlake Base coat and PolyGlide Topcoat – longterm test

PolyGlide Antifouling after 7,5 years - last 6 months on anchorage

Right and below:

Touch up after 7,5 years = 2%

Just HP wash down the hull at 150 bar

Costsaving of Hundreds of thousands in way of paint, no blasting, minimal painting works

Environmental friendly


1. Norwegian Cruise Lines 1. Wagenborg 1. Crowley group

2. Cunard Cruise Line 2. Spliethoff 2. US Coast Guard

3. MSC Cruise Line 3. JR Shipping 3. US Navy

4. Carnival Cruise Lines 4. JO Tankers 4. US Marines

5. Celebrity Cruise Lines 5. Vroon Shipping 5. Cobelfret ferries

6. Disney Cruise Lines 6. Vroon Offshore 6. Cobelfret Waterways

7. Seabourn Cruise Lines 7. Stolt Nielsen 7. Finnlines

8. Princess Cruise Lines 8. Seatrade 8. Flowserve

9. Pullmantur Cruise Lines 9. Crowley Shipowners and Ship Managers 9. Heerema group

10. Regent Seven Seas Cruises 10. Svitzer group 10. Technip group

11. Silversea Cruises 11. Kotug 11. Maersk Offshore group

12. AIDA Cruise Line 12. Smit group 12. MODEC group

13. Royal Caribbean Cruise Lines 13. Multraship 13. P&O group

14. Holland America Cruise Lines 14. Fairplay 14. Stena Group

15. Costa Cruise Lines 15. Jan de Nul (dredging) 15. Essberger / Broere

16. Wilhelmsen Ahrenkiel Ship Management GmbH 16. DEME Group (dredging) 16. Jumbo Heavylift

17. Wilhelmsen Ahrenkiel Ship Management BV 17. Koninklijke Boskalis 17. Odfjell Netherlands

18. Hamburg Sued (before Maersk) 18. Van Oord dredging 18. Reider Shipping

19. Nedlloyd / Maersk 19. Grimaldi 19. Shell Tankers

Reference List:

PolyFlake® EUROPE bv.

• Contact us at:

POLYFLAKE EUROPE bv

Tinstraat 30

2984 AN Ridderkerk

The Netherlands

Phone +31-657 781130

[email protected]

[email protected]

• www.polytube.eu/www.polyflake.eu

Belgium, The Netherlands, and Luxemburg: Cyprus: ----------------------Germany: --------------------

Greece: ----------------------Hong Kong: -----------------Italy, Monaco and ----------Switzerland:Norway: ----------------------

P.R. of China: ----------------South Korea: ----------------Singapore: -------------------United Kingdom: ------------Pending -

Lithuania, Latvia, Estonia, Poland, Russia, Ukraine.

AIMSS – Breda, The Netherlands

M.I.E. Services – LimassolZoepffel & Schneider - Hamburg

S.S.R.S. – PiraeusAsian Marine Service – Hong KongVictoria Maritime - Monaco

Ulrik Qvale & Partners – Oslo

Shi Marine Service - ShanghaiSH TECH - SeoulZentar Marine Pte. Ltd. - SingaporeEMCS – Port Erin / Isle of Man

ORCA Marine – Klaipeda

Exclusive Representation Agencies

. POLYFLAKE® - POLYTUBE® - POLYGLIDE® since 1987 .

Coating and Corrosion Technology from the 21st century – we are ever-there to protect your investment… GUARANTEED.

polyflake europe presentation 10 feb 2021

Documents