Polyolefins for Pipe and FittingsGrade Designation Type Colour MFR

(190°C / 5.0 kg)g / 10 min

DensityKg/m3

Tensile stress

at yieldMPa

Tensilemodulus

MPa

Typical applications

Polyethylene for Pressure Pipes

BorSafe™ HE3490-LS PE100 HDPE Black 0.25 959 25 1100 Water, gas, sewage and industrial pressure pipes

BorSafe™ HE3490-LS-H PE100 HDPE Black 0.25 959 25 1100 High stress crack resistant grade for toughest conditions – water, gas and industrial pressure pipes

BorSafe™ HE3492-LS-H PE100 HDPE Yellow orange 0.27 951 25 1000 High stress crack resistant grade for toughest conditions –

gas pressure pipes

BorSafe™ HE3494-LS-H PE100 HDPEDark-blue

0.25 951 24 1000 High stress crack resistant grade for toughest conditions – water pressure pipes

BorSafe™ HE3490-IM PE100 HDPE Black 0.55 959 24 1100 Injection moulded grade for pressure fittings

BorSafe™ ME3440 PE80 MDPE Black 0.85 951 19 800 Water, gas, sewage and industrial pressure pipes

BorSafe™ ME3441 PE80 MDPE Yellow 0.8 944 19 800 Gas pressure pipes

BorSafe™ ME3444 PE80 MDPE Blue 0.9 943 19 800 Water pressure pipes

Grade Colour MFR(190°C / 21.6 kg)

g / 10 min

Density kg / m³

PEX pipe standards Resin form Typical applications

Crosslinkable Polyethylene PEX for Pressure Pipes** Peroxide (PEX-a)

BorPEX™ HE1878-E Natural 10 951 EN ISO15875, DIN16892, ASTM F 876 Powder Plumbing and heating, gas, drinking water, industrial

Silane (PEX-b)

BorPEX™ ME2578 Natural 1 930 EN ISO 2578 Pellets Outer layer of a multilayer pipe for plumbing or heating

Irradiation (PEX-c)

BorPEX™ HE2590 Natural 8.5 944 EN ISO15875, DIN16892, ASTM F 876 Pellets Plumbing and heating, gas, drinking water, industrial

Grade Colour MFR(190°C / 2.16 kg)

g / 10 min

Density kg / m³

Resin form Peel strength at 23°C

Peel strength at 80°C

Typical applications

Polyethylene for Steel Pipe Coating

Borcoat™ HE3450-H Black 0.7 962 Pellets - - High performance bimodal HDPE top coat for higher ambient temperatures

Borcoat™ HE3450 Black 0.5 952 Pellets - - Bimodal HDPE top coat

Borcoat™ ME0420 Natural 1.3 934 Pellets 200 40 Grafted adhesive for HDPE systems

Borcoat™ ME0433 Natural 5 934 Powder 150 40 Grafted adhesive for HDPE systems

Grade Colour Designation MFR(230°C / 2.16 kg)

g / 10 min

Tensile stressat yield

MPa

Tensilemodulus

MPa

Flexural modulus

Mpa

Charpy impactnotched (+23°C)kJ / m²

Charpy impactnotched (-20°C)kJ / m²

Typical applications

Polypropylene Homopolymer

BE50 Natural PP-H 0.3 36 1650 - 7 2 Industrial, non-pressure pipe systems, sheets, profiles

Beta(ß)-PP BE60-7032 Grey PP-H 0.3 30 1300 - 50 5 Industrial, pressure and non-pressure pipe systems, sheets, profiles

Block Copolymer

BorECO™ BA212E Natural PP-B HM* 0.3 31 - 1700 50 5Gravity pipe systems for sewage, drainage or industrial applications; solid & structured wall systems

BorECO™ BA415E Natural PP-B 0.45 29 - 1500 60 6Gravity pipe systems for sewage, drainage or industrial applications; soil & waste pipes; structured wall systems

BA160E-8229**** Black PP-B 0.3 30 1300 - 50 5 Injection moulded compression fittings/mechanical pipe joints

Random Copolymer

RA130E Natural PP-R 0.25 25 800 - 20 2 Plumbing and heating

RA130E-8427** Grey PP-R 0.25 25 800 - 20 2 Plumbing and heating, industrial

Beta-PPR™ RA7050 Grey PP-RCT 0.3 25 800 - 40 2 Plumbing and heating

Polypropylene Steel Pipe Coating

Borcoat™ BB108E-1199*** White PP-B 0.9 25 - 1200 25 3 UV stabilised white top coat

Borcoat™ BB127E*** Natural PP 8 20 - - 15 4 Grafted adhesive for PP coating systems

Grade Peel strength adhesion @ 23°C

Peel strength adhesion @ 80°C

Borcoat™ BB127E >200 100

Note: Borouge can provide additional grades for pressure and non-pressure applications. For further information please contact

your local Borouge sales representative.

* PP-B HM = new class of high modulus PP-B with Flex. Modulus ≥ 1700 MPa** Other coloured compounds and PEX products are available upon request*** Powder and granule form is available.**** BA160E-8229 is classified as MRS 8.0 material

Test Methods

Property Specification Test Method

Designation for PE ISO 12162

Designation for PEX ISO/DIS 14531

MFR(230°C/2.16 kg) ISO 1133

MFR(190°C/5.0 kg) ISO 1133

MFR(190°C/2.16 kg) ISO 1133

Density ISO 1183/ISO 1872-2B

Tensile stress at yield ISO 527-2

Tensile Modulus ISO 572-2

Peel strength DIN 30670/DIN 30678

Charpy impact, notched (23°C) ISO 179/1eA

Charpy impact, notched (-20°C) ISO 179/1eA

Grade Designation Type Colour MFR(190°C / 2.16 kg)

g / 10 min

DensityKg/m3

Flexural modulus

Typical applications

Polyethylene for Irrigation

Borstar® Aquility™ LE3405 PE50 LLDPE Black 0.25 933 - Pre-compounded black PE50 for low pressure sub mains

Borstar® Aquility™ LE3406 - LLDPE Black 0.7 933 - Pre-compounded black PE for pipes usually > 0.4mm thick (flat & cylindrical inline)

Borstar® Aquility™ HE3408 - HDPE Black 0.5 958 1000 Pre-compounded PE for thin pipes usually < 0.4mm thick (tapes)

Polyolefins for

Pipe and Fittings Borouge - leading, innovative plastics provider

Borstar is a registered trademark of Borealis group.BorECO, BorSafe, Beta-PPR, BorPEX and Borcoat are trademarks of Borealis group.

Disclaimer The information contained herein is to our knowledge accurate and reliable as of

the date of publication. Borouge extends no warranties and makes no representations as to the

accuracy or completeness of the information contained herein, and assumes no responsibility

regarding the consequences of its use or for any printing errors. Our products are intended

for sale to industrial and commercial customers. It is the customer’s responsibility to inspect

and test our products in order to satisfy himself as to the suitability of the products for the

customer’s particular purpose. The customer is also responsible for the appropriate, safe

and legal use, processing and handling of our products. Nothing herein shall constitute any

warranty (express or implied, of merchantability, fitness for a particular purpose, compliance

with performance indicators, conformity to samples or models, non-infringement or otherwise),

nor is protection from any law or patent to be inferred. No statement herein shall be construed

as an endorsement of any product or process. No one is authorized to make representations

or give warranties or assume any other liabilities on behalf of Borouge except if in writing and

signed by a duly authorized Borouge employee. Insofar as products supplied by Borouge or its

subsidiary companies are used in conjunction with third party materials, it is the responsibility

of the customer to obtain all necessary information relating to the third party materials and

ensure that Borouge’ products when used together with these materials are suitable for the

customer’s particular purpose. No liability can be accepted in respect of the use of Borouge’

products in conjunction with other materials. The information contained herein relates

exclusively to our products when not used in conjunction with any third party materials.

Polyolefins for Pipe and Fittings

Borouge is a leading provider of innovative, value

creating plastics solutions. A joint venture between the

Abu Dhabi National Oil Company (ADNOC), one of the

world’s major oil and gas companies, and Austria based

Borealis, a leading provider of chemical and innovative

plastics solutions; Borouge is a groundbreaking

international partnership at the forefront of the next

generation of plastics innovation.

With its base in the United Arab Emirates and

Marketing & Sales head office in Singapore, Borouge

employs approximately 1,700 people representing

more than 40 nationalities and serving customers in

more than 50 countries across the Middle East, Asia-

Pacific, Indian sub-continent and Africa.

Building on Borealis’ unique Borstar® technology

and experience in polyolefins for more than 50

years, Borouge provides innovative, value creating

plastics solutions for infrastructure (pipe systems, and

power and communication cables), automotives and

advanced packaging.

In 2010 Borouge tripled its annual production capacity in

Abu Dhabi to 2 million tonnes and together with Borealis

has an annual manufacturing capacity of over 5.4

million tonnes of polyethylene and polypropylene. The

current Borouge 3 expansion project will be completed

at the end of 2013 resulting in an additional capacity of

2.5 million tonnes per year (t/y) being fully operational

by mid-2014. Borouge is also investing in plants and

logistics hubs in Asia and an Innovation Centre in Abu

Dhabi. Focused on our company mission, Value Creation

through Innovation, we ensure that our customers

throughout the value chain, around the world, can

always rely on superior products and security of supply.

Borouge is committed to the principles of Responsible

Care® and together with Borealis proactively

contributes towards addressing the world’s water

and sanitation challenges through their Water for the

World™ initiative.

Visit www.borouge.com and see how we are Shaping

the Future with Plastics.

Borouge polypropylene and polyethylene pipe solutions

BorSafe™Tailor-made PE pressure pipe compounds protecting our future

BorPEX™One stop shop for experience and innovation in cross-linked PE

Borcoat™ PE & PPComplete coating solutions with proven track records for extreme conditions

PP-RPP random for high quality hot and cold water pipe systems

Borstar® Aquility™More crop per drop: tailor-made solutions for durable micro irrigation systems

BorECO™Specifically designed PP materials for gravity pipe systems

MARKETING & SALES Singapore (Head Office) Borouge Pte Ltd 1 George Street #18-01 Singapore 049145 Tel: +65 6275 4100 Fax: +65 6377 1233 Email: info@borouge.com

For more information contact: info@borouge.comor visit www.borouge.com or call: +65 6275 4100

Bo

rou

ge

© 2

012

12 P

F S

DS

165

R E

N