portable hydraulic fluid purifier - core … hfp.pdf · portable hydraulic fluid purifier ......
TRANSCRIPT
PORTABLE HYDRAULIC FLUID PURIFIERDual Power Driven, Either Electric or Diesel Engine
P/N 040505-100NSN 4920-01-523-0592
HYDRAULICS INTERNATIONAL, INC.9201 Independence Avenue, Chatsworth, CA 91311 U.S.A.
Tel: +1(818) 718-2462Fax: +1(818) 718-2459
Website: www.hiinet.com
PORTABLE HYDRAULIC FLUID PURIFER Dual Power Driven, Either Electric or Diesel Engine
P/N 040505-100, NSN 4920-01-523-0592 Features
• Dual power driven: Facility power or Diesel engine • Meets EPA Engine emission requirements. • Purification system removes:
• 100% free water • Less than 100 ppm dissolved water • 100% entrained air / gases • 98% dissolved air/gases • Particulates to less than NAS Class 3
• Controls and system indicators are mounted on the instrument panel.
• In process fluid sampling from 0 to150 psig.
• Hose assemblies for direct connection to Hydraulic GSE.
• Air transportability with low profile and narrow structure. • Tie-down rings allow sling lifting or unit tie-down. • Base assembly and four steel roller bearing wheels
provide support and mobility. • A single, pivot steering mechanism enables high
maneuverability. • Expanding shoe type brakes, controlled by hand
brake lever locks two rear wheels. • Low noise emission.
Leading Particulars ITEM CHARACTERISTICS
Test medium Hydraulic fluid, MIL-H-83282, MIL-H-5606, or as specified by customer when ordering Capacity 11.5 gallons System and 3.2 gallons Cyclic Capacity Operating Conditions Ambient temperature range -40oF to +120oF Altitude Sea level to 5000 feet Relative humidity 0 % to 100% Operation position Up to 8 1/2° from horizontal
Overall Physical Characteristics Size Height: 52”, width: 45” and length: 56” Weight (Dry) 1500 lb Road clearance 8 inches Tow speed / Steering angle 20 mph max over improved loads / 40°
Dual Power Options Gen Set 10 HP one cylinder engine and generator output is 277/480 VAC at 3600 RPM – 7.7 kw Power input 460 Volt AC, 50/60 Hz three phase
Major Component Supply Pump 5 GPM, at 150 PSI, gear type Supply Motor ¾ HP, 3600 RPM 230/460 VAC, 3 Phase, 60 HZ Vacuum Pump 9.0 CFM, 10 in. Hg Vacuum Pump Motor ¾ HP, 1800 RPM 230/460 VAC, 3 Phase, 60 HZ Return Pump 3 GPM, 300 PSI, gear type Return Pump Motor ¾ HP, 1800 RPM 230/460 VAC, 3 Phase, 60 HZ Supply Hose Assembly 10 Ft-hose, QD -16 and plug Return Hose Assembly 10 Ft -hose, QD -20 and plug
Filtration Supply 2 Micron Absolute filter removes particulate Return 2 Micron Absolute filter removes particulate
Instrumentation Engine Control Diesel auxiliary power source, monitoring indicators, hourmeter Operation Panel On-Off switch, filter Indicators, operation modes, Emergency Stop pushbutton Pressure Gauges Supply, Return and Vacuum
Trailer and cabinet Structure Welded steel, tow bar, pneumatic tires, hand break, hinged doors and tie-down rings
HYDRAULICS INTERNATIONAL, INC. 9201 Independence Avenue, Chatsworth, CA 91311 U.S.A. Tel: +1(818) 718-2462 Fax +1(818) 718-2459 Email: [email protected]
The technical information contained on this product sheet is current as of this publishing. Information contained herein is subject to revision without advanced notification from the manufacturer. For the most recent up-to-date information, please contact Hydraulics International, Inc.
All rights reserved ©2007 Hydraulics International, Inc.