portable & safe lighting solutions with no...

www.smithlight.com

Innovative Lighting Solutions

portable & safe lighting solutionswith No cables

www.smithlight.com


Industrial “IN”seriesThe SmithLight “IN” Series is a heavy duty, safe and portable lighting system that is fully rechargeable. For applications in Mining, Utilities, Emergency Services, Rail and Road Maintenance, Construction, Military, Industry and Marine.

The SmithLight Industrial is available in 3 models with battery run times from 12 to 24 hours (depending on model) and can be easily charged from either 100/110/240V, 50/60Hz AC power supply or 12 / 24 V DC from most vehicles.

The unique design of these lights make them as easy to use as an everyday carry case. Simply press the locking button on the handle lift the light head and operate.

Flashing mode for emergencies

Sturdy carry handle with locking button

Rubber seal around lid

Very low heat level is generated by the light source

Light head tilts to 60°

Light head adjusts to 2 height positions

IP65 rating, able to operate in most environments

OPTIONALBlack Striping

Non-slip rubber sole fi tted to base for added protection & stability

Lens is made from strong, durable polycarbonate

Aircraft grade aluminium

extension arms

Remote Control unit included

UV and salt water resistant

The body of the light is

manufactured from automotive type

ABS PA-747

Low battery alarm and LED charge level indicator for battery protection

Charging cables stored in internal compartment

www.smithlight.com

334mm 220mm

580mm

Closed Side View

908mm

1120mm

Fully Extended Half Extended

Specifi cations IN120L-R-BC IN120LB-R-BC IN2400L-R-BC

Gross weight 10.8 kg 12.8 kg 12.8 kg

Light Head LED 2 side LED 2 side LED 1 side

Rated power (w) 20W 20W 28W

Number of LED’s 288 288 144

Lumen** 2160 2160 2400

Colour temperature (K) 6000 - 7000K 6000 - 7000K 6000 - 7000K

Colour Rendering index 75 75 75

Working voltage 12VDC 12VDC 12VDC

Battery type VRLA VRLA VRLA

Battery capacity 10AH 18AH 18AH

Battery dimensions 181 x 76 x 121mm 180 x 155 x 75 180 x 155 x 75

Battery run time (fully charged) 12* 26* 20*

Battery charging time 13H 23H 23H

Standby time 20 - 45 days 30 - 50 days 30 - 50 days

Charging method AC or DC AC or DC AC or DC

Charging input AC100/110/240V, DC12/24V AC100/110/240V, DC12/24V AC100/110/240V, DC12/24V

Outside material ABS PA-747 ABS PA-747 ABS PA-747

Lens material Polycarbonate Polycarbonate Polycarbonate

Storage temperature & humidity -15°C to 40°C, 5 - 95% -15°C to 40°C, 5 - 95% -15°C to 40°C, 5 - 95%

Operating temperature & humidity 0°C to 40°C, 5 - 80% 0°C to 40°C, 5 - 80% 0°C to 40°C, 5 - 80%

Protection grade IP65 IP65 IP65* Ratings based on theoretical values for Single Light Head use. ** Lumen Rating at sourceIN2400L-R model has single side light head with 3 stage brightness - 600, 1200 and 2400 Lumen.

Charging Base ModuleProduct Code: SL-CB-001Description: When the SmithLight model type “IN-R” is attached to the charging base, it can be mounted to a wall bracket or easily moved around on its swivel casters. It can be retrofi tted to a vehicle and hard wired into the 12/24V power supply.

Wiring kit supplied with charging base.

NOTE: The Charging Base accessory is only compatible with SmithLight model type “IN-R” that are fi tted with a female base charging mechanism.

Accessories All Accessories are sold as seperate items

IN120L-R-BC IN120L-BR-BC IN2400L-R-BC Specifications

www.smithlight.com


Industrial “IN”seriesThe SmithLight IN120LB-R-EML model is a new design incorporating a dual purpose light head. The front of the light head has 144 LED’s for a strong, white work light. The back of the light head features LED’s with 4 Signal Light Functions, Red ‘X’, Green arrows for Ahead, Right and Left, these can be set in constant or fl ashing modes

This safe, portable and fully rechargeable lighting system has many applications in Emergency Services, Rail and Road Maintenance, Construction Sites, Mining, Traffi c Co-ordination, Military and Marine.

The innovative Australian design of these lights makes them as easy to use as a carry case.Simply press the locking button on the handle, lift the light head and operate.





Light head tilts to 60°

Light head adjusts to 2 height positions


All manual operating switches are located under the light head




extension arms



The body of the light is manufactured from automotive type ABS PA-747

4 signal light functions Red ‘X’, Green Arrows, Ahead, Right & Left

Non-slip rubber sole fi tted to base for added

protection & stability


www.smithlight.com

334mm 220mm

580mm

908mm

1120mm

Fully Extended Half Extended

Closed Side View

IN120LB-EML-BC Specifications

RED X GREEN ARROWAHEAD

GREEN ARROWRIGHT

GREEN ARROWLEFT

Charging Base ModuleProduct Code: SL-CB-001

Description: When the SmithLight model type “IN-R” is attached to the charging base, it can be mounted to a wall bracket or easily moved around on its swivel casters. It can be retrofi tted to a vehicle and hard wired into the 12/24V power supply.

Wiring kit supplied with charging base.

Emergency Services Lens CoversProduct Codes:

SL-IN-LEN-STOP, SL-IN-LEN-POL, SL-IN-LEN-POLI

Description: Coloured lens in 3 types, Stop, Police and Polizei. These lenses are made from durable polycarbonate and are easily attached to the light head.

NOTE: The Charging Base accessory is only compatible with SmithLight model type “IN-R” that are fi tted with a female base charging mechanism.


Specifi cations IN120LB-R-EML

Gross weight 12.8 kg

Rated power 12W

Number of LED’s 144pcs for lighting

Lumens** (lighting side) 1080lm

LED Intensity (signal side) 17cd - Red, 28cd - Green

Viewing angle (signal side) >120°

Colour temperature (lighting side) 6000-7000K

Working voltage 12VDC

Battery type VRLA

Battery capacity 18AH

Battery dimensions 180 x 155 x 75mm

Battery run time (fully charged)20H (two sides) 72H (signal side24H (lighting side)

Battery charging time 20H

Standby time 20 - 45 days

Charging method AC or DC

Charging input AC100/110/240V, DC12/24V

Outside material ABS PA-747

Lens material Polycarbonate

Storage temperature & humidity -15°C to 40°C, 5 - 95%

Operating temperature & humidity 0°C to 40°C, 5 - 80%

Protection grade IP65* Ratings based on theoretical values for Single Light Head use. ** Lumen Rating at source

www.smithlight.com


Traveller-R-BCThe SmithLight Traveller-R is a safe, portable and rechargable lighting system with up to 10 hours of battery run time.

This fully self contained lighting system incorporates a maintenance free sealed battery that can be charged from either 100/110/240V, 50/60Hz AC power or 12/24 V DC as standard and can be operated whilst in the charging mode.

The design of the Traveller-R makes it as easy to use as an everyday carry case, simply press the locking button on the handle to lift and operate.

Suitable for many applications including Mining, Utilities, Maritime, Trades, Recreationaland 4WD activities







Non-slip rubber sole fi tted to base for added protection & stability

Lens is made from strong, durable polycarbonateAircraft grade aluminium

extension arms





ABS PA-747


www.smithlight.com

334mm 220mm

580mm

Closed Side View

908mm

Half Extended

Specifi cations Traveller-R-BC

Gross weight 6.3 kg

Light Head LED 1 side

Rated power (w) 7W

Number of LED’s 120

Lumen** 720

Colour temperature (K) 6000 - 7000K

Colour Rendering index 75


Battery type VRLA



Battery run time (fully charged) 10*









Protection grade IP65* Ratings based on theoretical values .

670mm

Extended

450mm

270mm 170mm

Traveller-R-BC Specifications

Colour Lens FiltersProduct Code: SL-T-LENSColoured Lenses in Red, Amber and Green that can be easily fi tted to the light head on the Traveller-R.

The coloured lenses can be used for warning or signalling in emergency situations, subdued lighting and night photography applications.

Carry pouch included.


** Lumen Rating at source

www.smithlight.com


Weekend Warrior™ The SmithLight Traveller-R-WW is a safe, portable and rechargable lighting system with up to 10 hours of battery run time.

This fully self contained lighting system incorporates a maintenance free sealed battery that can be charged from either 100/110/240V, 50/60Hz AC power or 12/24 V DC as standard and can be operated whilst in the charging mode.

The design of the Traveller-R-WW makes it as easy to use as an everyday carry case, simply press the locking button on the handleto lift and operate.

Suitable for many outdoor andrecreational activities including, 4WD Off Road, Camping, Farming and where reliable and portable lighting is required.







Non-slip rubber sole fi tted to base for

added protection & stability



extension arms





ABS PA-747


www.smithlight.com

334mm 220mm

580mm

Closed Side View

908mm

Half Extended

Specifi cations Traveller-R-WW-BC

Gross weight 6.3 kg

Light Head LED 1 side

Rated power (w) 7W

Number of LED’s 120

Lumen** 720

Colour temperature (K) 6000 - 7000K

Colour Rendering index 75


Battery type VRLA



Battery run time (fully charged) 10*









Protection grade IP65* Ratings based on theoretical values for Single Light Head use.


670mm

Extended

450mm

270mm 170mm

Colour Lens Filters Product Code: SL-T-LENS

Coloured Lenses in Red, Amber and Green that can be easily fi tted tothe light head on the Traveller-R-WW

The coloured lenses can be used for warning or signalling in emergency situations, subdued lighting and night photography applications.

Carry pouch included.

Storage Bag / PackpackProduct Code: SL- BACKPACK

Fits Traveller-R-WW-BC Complet with weatherproof zip, convenient front pocket with zip, refl ective tape & adjustable shoulder &waist strap.

Traveller-R-WW-BC Specifications

** Lumen Rating at source

www.smithlight.com


E.I.L Tower System Emergency Inflatable Lighting (EIL) TowerThe SMITHLIGHT® EMERGENCY INFLATABLE LIGHTING (EIL) Tower is a unique and patented portable, infl atable, lightweight lighting tower solution for the illumination of large areas with 95,000 lumens (Lm) with the capability to be increased to 190,000 Lumens (Lm).

FEATURES OF THE EIL LIGHTING TOWER:LIGHTWEIGHT AND COMPACT

Packed in a single ABS container that can easily be stored in the boot of a car or carried by hand by one person.

SIMPLE AND EFFECTIVE Designed and manufactured to make any lighting job easy.

QUICK ASSEMBLY AND DISASSEMBLY Can be fully extended in seconds and completely disassembled

again in minutes.

ADAPTABILITY Adjustable in height of up to 5 meters requiring minimal

components.

POWERFUL Standard low-beam lighting provides 360 degrees coverage with

the option to semi-isolate the light in a fi xed direction thereby allowing for work at height activities

STURDY The cylindrical fabric tower is manufactured in a double resin fi re-

retarded fi nish which provides high levels of resistance to cuts and tearing in harsh work environments

LAMP CONSTRUCTION AND PROTECTION Type O explosion proof lamp surrounded with double glazed

tempered glass which is protected by a metal enclosure to prevent any damage to lamp

LOW BEAM Light The patented cylindrical fabric diffuser low beam light allows for

very little contrast index allowing for tasks to be completed up to 50 meters away from direct light source

RESILIENT The cylindrical tower features an integrated load bearing structure

where positive air is constantly blown in under pressure. The high internal air pressure protects the tower from damage under adverse weather conditions and is wind rated to up to 90km/h

VERSATILITY All EIL towers systems also support accessories such as mountable

video cameras, aerials and repeaters to the top of the tower for surveillance and communications operations

AVAILABLE IN TWO OPTIONS:1. 230/240V – 50Hz plug in mains – power

2. Either petrol or diesel self-powering generating units

ACCESSORIES:A range of OEM accessories are available that allows for the securing of the EIL tower to mobile equipment i.e. trucks, earthmoving machinery, forklift trucks, ATV’s and many other mobile equipment in general (speed restrictions apply when moving and transporting).

Also available as an accessory is a Lighting-Plus kit which doubles the light output from 95,000Lm to 190,000Lm.

Customised messages and logos can also be applied to the infl atable EIL tower for clients specify requirements.

All You Need Is Seconds

PORTABLE LIGHTINGPORTABLE LIGHTING95,000 Lm to 190,000 Lm

www.smithlight.com

The SMITHLIGHT® EMERGENCY INFLATABLE LIGHTING (EIL) Tower (Plug In 230/240V-50Hz Mains Power) offers a number of technical solutions to meet different needs:

• Various height hinges to change the height of the structure in seconds• 240V input and output plugs to double the light power• Power connection to install a 3G wireless transmission video camera• Use of special accessories

A FEW SECONDS TO CHANGE THE HEIGHTWorks in any situation

Sometimes it is necessary to light internal areas with low ceilings. The SMITHLIGHT® EIL is equipped with a system that allows the operator to reduce the operational height in a few seconds. Two hinges placed at different heights can be connected to each other bringing the operating height to 2.5 - 3 m.

REMOTE CONTROL SYSTEMS UPGRADING UNITS

Cameracontrol

Up to 80 units can be managed simultaneously

Brightness reduction up to 50% of the power

Lamp consumption and hours of work status control

Additional lighting module with anti-explosion 400/600/875 W lamps

Reducibility tower from 4.10 to 2.5 m

Safetysupport

Control panel

Oil generator module

HYDROENGINE

Additional lighting modules

LAMPPLUS

External UPS moduleUPSBrightness manual control with power reduction of up to 50%

Output socket

Electronic ballast

Visual inspection and transmission module with wireless PTZ video camera

Power socket for additional lights, video camera, aerials and repeaters

EIL Tower System FeaturesEIL Tower System Features

Emergency intervention for passenger evacuation

Emergency rescue

Temporary accommodation lighting

Railway Track work & maintenance

Disaster recovery lighting

Disaster recovery lighting

Festivals & Field events

www.smithlight.com


LIFTINGA normal air-fi lled tube is raised in two stages: 1st infl ation is completed on the ground. 2nd Once you reach pressure, the tube can be lifted with the manual help of the operator. The problems related to this system are: diffi culty of infl ation in critical situations and need for an operator to push upwards. Any weights on the top create moments of creasing at the centre of the tube and diffi culty in setting it up.

EIL Controlled elevation system (CES). The extension of the bearing structure of the EIL tower takes place vertically in stages, thanks to partitioned areas with holes of varying diameters. This creates a differential pressure between the various sectors and the extension of the vertical structure. The second advantage of the system regards the reduced lever arms L1, L2 and L3 which allow moments favorable to lifting the weight (P). The system also allows one to reach very high operating heights.

Setting up photography lights for international catwalk show

Extension of exhibition areas for Christmas market

Night rally lighting

Kick Boxing Championships, simultaneous lighting of the audience

area and of the ring

Sponsorship and lighting

Fencing and night intervention forensics

Temporary mobile installation on fi re fi ghting vehicle

Stage and audience area lighting Outdoor theatrical performance area

Image transmission via 3G Red Cross intervention area

LOWERINGThe problem with lowering an infl atable tube is that a reduction of internal pressure causes the base to give, and the structure to fall, with a very long lever arm and consequent probable damage to the light source. The lowering of the structure therefore requires the presence of an operator.

With a further patent, a controlled lowering system (CLS) has been introduced in the EIL structure. This system creates a «give» point at half-height through a rubber band fi ttingly tightened in relation to levels of internal pressure and the height of the structure. The rubber band’s action also creates an effect slowing down the speed of internal pressure reduction; the top of the structure thus comes to rest on the ground gently. The adoption of this system has led to a 70% reduction of cracks in the lighting sources.

EIL Tower System Features

P

P

L2

L1

L3

P

Confi ned spaces, major disaster situations, hard to get to & hazardous locations. Gives you light where lighting trucks &

trailers can not go. Easily deployed by one person

www.smithlight.com

(EIL) Emergency Inflatable Lighting Tower Specifications

Chassis Plug In 230/240V-50Hz Mains PowerChassis ABS + PMMA

Cover ABS + PMMA

Colour White or Yellow

Size 460 x 620 x 620mm

Weight 32/35* Kg

Dust fi lter (number) 4+1

Exhaust valve humidity Yes

Tower

Material Nylon M1 Fire-retardant double resin coated

Porosity fabric 0

Height 2500/3750*mm

Diameter 400 mm

Top end hole 200 mm

Operative height 2800/4100*mm

Extension System

Type EIL Systems Infl atable Tower

Power motor 500 W x 1

Complete extension time (Seconds) 15 Seconds after setup of power*

CES (Controlled Elevation Systems) 3 Sectors

CSL (Controlled Levering System) 2 Sectors

Pressure max 60 mb

Defl ation Valve Yes

Lamp

Type Type “0” bulb protection anti UV explosion protection

Control Gear Mercury balast + Ignition

Power Supply 230 V 50Hz

Light Source HID 875 Halogen vapour

Power 875W / 875 + 875W*

Light Output 95000/190000* lm

Lamp Lumens per watt 109

Rated Life 20000 h

Correlated Colour 4000 K

Chromnaticity (CIE - XY) 385, 390

Colour rendering Index (CRI) or (RA) 68

Typical Warm Up Time 3-5 minutes

Restrike 5-7 minutes

Lamp Protection

Connection Reinforcement in cement high temperature resistant

Cage Metalic thread D 3 mm - 290 mm - D 200 mm

Bulb protection with additional glass cyclinder antiexplosion

Shockproof rubber o-ring and strips connection cage/tube

Unscrewingproof Yes

Ballast Specifi cation

Power Supply 230V ± 10%

Temperature Ratings 90°

Power Factor (min) 85%

Imput Watts 970W

Operating Temperature -30°C + 105°C

Wind Resistance

Without bracing cable 20/25 km/h

With bracing cable 75/90 km/h

Accessories Supplied

Standard Rods Yes

Bracing cables Yes

Repair Kit Yes*Depending on Model

OPENING/CLOSURE

LIFTING

CONTROLLED LOWERING

BRIGHTNESS

TRADITIONAL LIGHTING TOWER

HIGH-BEAMEFFECT

EILSYSTEM

OPERATING BRIGHTNESS SCALE

LOW-BEAMEFFECT

Allows the load-bearing structure of the EIL SYSTEMS tower to vertically extend in just seconds, thereby bringing the light, aerials, wireless repeaters and video cameras to their operating height.

Ensures the load-bearing structure gradually moves from up to down. It takes minutes to defl ate, fold up and close the container.

www.smithlight.com


Safety Warning LED Light

Features & Benefi ts• Fully rechargeable AC or DC

• Lithium-ion battery

• 9 light mode patterns

• Waterproof to 10 metres

• Will fl oat if secured

• Impact resistant casing

• Strong intergrated magnet

• Will not damage surfaces

• Light can be seen for up to 900m (3000ft) at night

Applications for Police, Emergency Services, Traffi c Control, Search & Rescue, Road & Rail Maintenance, Hazard Warning and Boating.

Single Blister Pack Code

YELLOW Code: SRF81YB

ORANGE Code: SRF81OB

Includes storage pouch, Pulsar light, 110-240V Wall charger, 12-24V Vehicle charger, Magnetic Connector Hub & User instructions

Single Boxed Codes

YELLOW Code: SRF81YA

ORANGE Code: SRF81OA

RED Code: SRF81RA

BLUE Code: SRF81BA

Includes Pulsar light, 110-240V Wall charger, 12-24V Vehicle charger, Magnetic Connector Hub & User instructions

Includes Handy Storage pouch

Single Blister Pack

Single Boxed

www.smithlight.com

Specifi cations

Dimensions 108mm (L) x 111mm (W) x 35mm (H)

Battery Type Rechargeable Lithium-Ion 700AH - 3.7V 5 + year life

Charging Specifi cations

120V AC/DC Charger Input: 110-240AC 50-60Hz 0.5 AOutput: 58.5V 450mA 5.0v DC 100mAh

12V DC Charger Input: 12-24V DCOutput: 5.5V1500mA

Temperature Range -36 °C - 116°C (32°F - 240°F)

Emission Source 360° LED ray Solid State

Visibility Range Night - 900m (3000ft) land or water & 16km (10 miles) from air Day - 300m (1000ft)

Water depth rating 10m submersion

Chemical Contains no hazardous chemicals withstands exposure to petroleum based fuels

Net Weight 283.6 grams

Position Light Patterns Run Times

No. 1 Rotate 7 hours

No. 2 Quad Flash 7 hours

No. 3 Single Blink 50 hours

No. 4 Alternating Blinks 7 hours

No. 5 SOS Rescue (Morse Code) 12 hours

No. 6 Steady on - High 4 hours

No. 7 Steady on - Low 30 hours

No. 8 2 LED Flashlight 7 hours

No. 9 4 LED Flashlight 5 hours

No. 10 OFF

Kit includes: Storage/Charging case, 6 Pulsar Lights,110-240V Wall Charger, 12-24V Vehicle Charger and Instructions

6 PackCARRY CASE

Six Pack Case Codes

YELLOW Code: SRF86YPA

ORANGE Code: SRF86OPA

RED Code: SRF86RPA

BLUE Code: SRF86BPA

www.smithlight.com


Features & Benefi ts• Fitted with CREE brand LED light source technology, that has up to

100,000 hours life before replacement.

• Rechargable Lithium battery with up to15 hours light time.

• Lightweight (only 85 grams) and comfortable to wear with head strap.

• Mounts easily to safety helmets with head strap or with fi tting bracket.

• Warning lights for low battery.

• Charging mode fi tted with intelligent chip technology that prevents overcharging.

• CMEX approved (Overseas equivalent of NATA for joint recognition approvals).

Product ApplicationsMining, Chemical Industries, Rescue Services, Fire Fighting, Military, Rail Maintenance and Repairs, Building Inspections and Caving.

The new SmithLight LED Mini Headlamp has been developed with operator safety in mind where a hands free light is required. It is ideal for use where the risk of explosion may be present or in highly fl ammable areas where conventional lights would be unsuitable.

LED EXPLOSION PROOF

Mini HeadlampModel type EX ib IIC T4

www.smithlight.com

3 Fitting Options

Description Unit SL-HL135EX

Rated voltage V 3.7

Rated capacity Ah 1.4

Charging voltage AC 100V-240V 50Hz/60Hz

LightSource

Current mA 80

Illumination Lux 800

Average life of LED h 100,000

Lighting time h 15

Charging time h 4-6

Service life of battery Recycled ~ 1000

Dimensions mm 50 x 65 x 60

Net weight g 85

Lightweight and comfortable to wear with easily adjustable headstrap.

Fits over most safety helmets and attaches using the 3 plastic clips on the head strap.

5. Lamp Clip

6. Mounting Screws

7. Operating Manual

Items included:1. Charger

2. Head Strap

3. Helmet Bracket

4. Cushion Pad

Can be mounted to safety helmets using the bracket clip and screws supplied.

Model type EX ib IIC T4Ex = Explosion Proofib = Intrinsic SafetyIIC = Hydrogen/AcetyleneT4 = Up to 135 degree C

Safety Warning FeatureEasily located behind the

lens of the SmithLight Mini Headlamp are twin fl ashing red lights to warn or signal in emergencies. The lights

will also fl ash to indicate low battery level.

Lens has adjustable angle down through 90º.

WW-HL135EX Specifications

www.smithlight.com


Features & Benefi ts

• Two light intensities from bright to distant

• LED light source is American Cree brand with a life of up to 100,000 hours.

• Fully rechargeable Lithium-ion battery included

• Charges from 240V mains or 12V vehicle charger

• Low battery warning light

• Light beam range of approximately 170 metres

• Adjustable and comfortable to wear with the headstrap or can be easily fi tted to most types of safety helmets

• Fitted with two intense red fl ashing lights for signalling or as safety warning.

• The headlamp has two magnetic disks on the rear of the light for attaching to steel.

• Weatherproof sealed construction

• Intelligent chip technology that protects the battery from over charging.

• Light head pivots down through 90º.

Weekend Warrior™ General Purpose Industrial Cree LED

Mini HeadlampJust some of the many applications for this versatile Mini Headlamp are 4WD off-road, Outdoor recreational activities, Camping, Caving, Hunting, Inspections and Maintenance. In fact almost anywhere you travel this should be an essential accessory.The Weekend Warrior also comes in a handy carry pouch.

General Purpose Industrial Cree LED

Mini Headlamp

Items included with Headlamp

Lamp head pivots down through 90º

Low:

50 lumenHigh:

100 lumen

1. Mains battery charger2. Vehicle 12V charger unit3. Elastic Headstrap4. Lithium-ion battery5. Carry pouch6. Instruction manual

Two intense red fl ashing lights for warning or

signalling

Lamp easily attaches with headstrap to

most helmets

Code: SL-HLIW

Material construction Main body: ABS Lens Cap: AS Lens: PC

Colour of body Army Green

Dimensions Length 86.5mm x Dia. 39mm

Bulb CREE Brand LED

Light beam High: 100 lumen / Low: 50 lumen

Lens material High coated lens fi lm PC

Battery type suppliedRechargeable Lithium-ion 18650 with fender apron

Weight 150g (including bat-tery)

Switch modes Low light, High light, Red light fl ashing, off

Cap material: AS

Two magnetic discs

Lens material: PC

Lamp cup

On / Off button

Main body material: ABS

Sturdy helmet clips

Fully adjustable camoufl age style

headstrap

General Purpose Industrial Cree LED Mini HeadlampINSTRUCTION MANUAL

www.smithlight.com

This manual should be read and understood before using this product.

*Lumen Rating at source

www.smithlight.com


Component Description Unit Value

BatteryType D Ni-MH battery Voltage / Capacity V / mAh 2.4 / 9000

Average life cycles >1000

Charger Input / output / power V / V / mA 240 / 15 @ 800mA

Charge Time h = 10

Housing Material PC

IP Rating water and dust protection IP 67

Size L x W x H mm 152 x 93 x 150

Weight Net weight kg 0.670

Light Source

10mm white LED PC 17

Total lumen / colour temperature Mcd / K 17 x 32,000 / =6000

Constant illumination time h = 16

LED average life h >20,000

Torch operation Press switch to turn on the torch, press again to turn off

RTLED1 Red, Green, White signal light with LED torch Signal Operation

Red, Green, White LED 21 / 19 / 21 pcs

1. Press switch A to turn on the constant Red signal, Press it again to turn off.

2. Press the corresponding switch to change the signal colour, press it again to turn off.

Red, Green, White signal lumen 21 / 19 / 21 x 10,000 mcd

Max. current / LED average life 460mA / > 20,000h

Contant Red / fl icker / frequency 16h / 30h / 1Hz

Contant Green / fl icker / frequency 16h / 30h / 1Hz

Contant White / fl icker / frequency 12h / 24h / 1Hz

Features & Benefi ts• Dual light source which provides

individual signal and LED Torch operation.

• Digital CPU.

• The high quality Ni-MH battery and a smart multi stage pulsing charge is designed to maintain peak performance for both the battery and charging system.

• Designed with LED indicators and sounding Buzzer, providing a clear warning alarm when the battery level is low.

• Independent switches which allows user friendly operation when selecting your light colour.

• Weather proof charging socket.

• Package includes RTLED1 torch, 240 volt AC charger, 12 volt DC Car charger, Carry strap and a heavy duty Aluminium carry case.

RTLED1 Rechargable LED Signal Lamp

Torch switchFully charged LED indicator

Low power LED indicator

Charging LED indicator

Signal switch CSignal switch B

Signal switch A

Signal lens cap

Torch lens cap

Charge socket

Light source for signals

Light source for torch

17 LED Torch

21 LED REDSignal

19 LED GREENSignal

21 LED WHITESignal

www.smithlight.com


GOLIGHT® Profiler™ IILithium-ion Rechargeable Searchlight

Durable• Carbon fi bre reinforced housing

• Precision pressure cast, aircraft aluminum parabolic refl ector

• High performance, high impact polycarbonate lens

• Shock proof rubber lens surrounds & cushioned grip

Versatile• Patented Two-position swivel handle - Lantern or Pistol Grip

• Dual light sources - Searchlight beam or LED convenience beam

• Precision balanced & lightweight - only 1.587 kgs / 3.56 lbs

• Squeeze button, locking trigger switch

• LED battery power level indicator gauge

• On demand 12vDC docking station charging system

• 240v AC charger & 12v direct run cord.

• Revolutionary Battery Technology

• Removable and rechargeable Lithium-ion battery pack

• 60 minute run-time in searchlight mode; quick 2-hour recharge time

• 50+ hours run-time in convenience mode

Powerful• Exclusive Nx BlueFusion™ Technology

• 440 M. Lux

• 55w 4000K high colour temperature Blue Vision searchlight Beam

• 1w Super bright LED convenience Beam

Golight® NxT BlueFusion™Combining a revolutionary deep parabolic refl ector with an H-7 axial fi lament Blue Vision Bulb, Golight® NxT BlueFusion™ Technology generates an extremely bright, virtually perfect beam of light to eliminate dark spots, cast a broad spectral pattern and reach distances of up to 1.6 km / 1 mile. Projecting more usable light than other handheld brands Golight® NxT BlueFusion™ brings more power to you, anywhere you go.

Golight® NxT BlueFusion™ LUX* FACTORS

www.smithlight.com


Features & Benefi ts• Cr5 Pentabeam™ Technology

• Remote Controlled Operation

• Three Different Remote Options

• 370° Rotation x 135° Tilt

• Permanent and Portable Mounting Options

• U.V. Ray and Salt Water Resistant

• 5.5 Amps with 12v Power Source (24v Optional)

GOLIGHT® & RADIORAY® ACCESSORIES• Dash Mount Hard Wired Remote (2020-D, 2067-D)

• Wireless Hand-Held Remote (30100)

• Clear Top Housing - White (10200) Black (10251)

• Snap-On Flood Lens & Bezel (15320)

• Permanent Mount Shoe - White (15202) Black (15203)

• Magnetic Mount Shoe - White (16301) Black (16303)

• Security Dome (17920)

• Philips H9 Bulb (49000)

• LED Insert (15444)

Permanent mount modelsWireless Hand-Held Remote - 2000 (white) 2051 (black)Wired Dash Mount Remote - 2020 (white) 2021 (black)

Wireless & Dash Remote - 2067 (white) 2049 (black)

PORTABLE MODELS - Suction Cup & Permanent Shoe Wired Remote - 5149 (charcoal) 5167 (white)

Wireless Remote - 7900 (white)

PORTABLE MODELS - Suction Cup & Magnetic Shoe Wireless Hand-Held Remote - 7901 (white) 7951 (black)

GOLIGHT® & RADIORAY® Remote Control Searchlights Heavy duty lighting power for your work truck or

any application where light is key to success LED Insert Now Available

Golight® Halogen Light Beam Dimensions

Peak Beam Intensity: 225,000 CandelaMaximum Beam Distance: 949 m / 3,113 ftBeam Angle: 8°

2049M 24v (black)with rock cover

www.smithlight.com


Features & Benefi ts• LED Technology

• Remote Controlled Operation

• Three Different Remote Options

• 370° Rotation x 135° Tilt

• Permanent and Portable Mounting Options

• U.V. Ray and Salt Water Resistant

• 3 Amps with 12v Power Source (24v Optional)

GOLIGHT® & RADIORAY®

ACCESSORIES• Dash Mount Hard Wired Remote (2020-D,

2067-D)

• Wireless Hand-Held Remote (30100)

• Clear Top Housing - White (10200) Black (10251)

• Permanent Mount Shoe - White (15202) Black (15203)

• Magnetic Mount Shoe - White (16301) Black (16303)

• Security Dome (17920)

Permanent mount modelsWireless Hand-Held Remote - 20004 (white) 20514 (black

Wired Dash Mount Remote - 20204 (white)Wireless & Dash Remote - 20674 (white) 20494 (black)

PORTABLE MODELS - Suction Cup & Permanent Shoe Wired Remote - 51494 (charcoal) Wireless Remote - 79004 (white)

PORTABLE MODELS - Suction Cup & Magnetic Shoe Wireless Hand-Held Remote - 79014 (white) 79514 (black)

GOLIGHT® LED & RADIORAY® LED LED Remote Control Searchlights

led

Golight® LED Light Beam Dimensions

Peak Beam Intensity: 200,000 CandelaMaximum Beam Distance: 894 m / 2,933 ftBeam Angle: 8°

LED Technology - meets the versatility of the Golight/RadioRay product line

www.smithlight.com

GOLIGHT® GXL™ Fixed LED Lighting

Features & Benefi ts• Fixed LED Lighting

• Multiple Illumination Options Spot, Flood, IR

• Floodlight Output 6000 Max Lumens

• Spotlight Intensity 110,000 Candela

• 94% Optical Effi ciency

• 50,000 hr Life Expectancy

• 9-32 Volt DC Input, Low Power Draw

• IP 67 Rating; Instant On

• Shock-Proof, Solid State Lighting

• Quick Adjust Mounting Cradle

• Operating Temp Range: -40° - 145° F

• Powder Coat Cast Aluminum GXL™ LED Spotlight - 4411 (black)GXL™ LED Floodlight - 4421 (black) 4422 (white)

LED Technology - Brillant white light that is energy effi cient, robust, and long lasting

132.08mm5.2”

139.70mm5.5”

154.94mm6.1”

121.92mm4.8”

106.68mm4.2”

www.smithlight.com

CAUTIONRead Instruction Manual before using. Inspect all moving parts.

www.smithlight.com

E & OE. Specifi cations and dimensions subject to change without notice.

© Copyright SmithLight Pty Limited May 2014 BØC - TB - 10 - SS - IEL

DISTRIBUTED BY:

The lumen is one of the most misunderstood and most misquoted values used in describing light output. A lumen is simply a measure of total visible light energy (luminous-fl ux) produced by a light source, and as such, does not consider the area over which it might be spread. Said another way, it is a measurement of the energy emitted by the bulb or LED that the eye can actually see. So, it is very similar to a watt. Like a watt, it is also independent of distance. A 100 lumen bulb is a 100 lumen bulb at ten metres or ten kilometres.You don’t measure lumens with a simple light meter. If you are using a light meter you are measuring the illumination level, but not lumens. The typical light meter is measuring lux, which is a measure of lumen-density, (i.e. luminous fl ux falling on a given area) but not lumens. Two bulbs with the same number of lumens can have very different illumination level readings. A bulb with a narrow beam focus will measure much higher lux in the centre of the beam than its wider-angle counterpart. This is because lux is a measurement of just lumen density, but not total lumens.To measure the Lumen output of a light we use an “Integrating Sphere”, this is a large sphere that is coated inside with a special refl ective coating that creates a uniform luminance to all points on the sphere. A detector located behind a baffl e then measures a known percentage of the luminance and a total output is calculated.The Integrating Sphere is perfect for measuring an isotropic light source as this is one that emits light in every direction at the same intensity; unfortunately in comparison no light source is truly isotropic. Most if not all will have variations in intensity at different angles and spots where the light is blocked by the body of the lamp. Most LED lights only emit in the forward direction with beams from a spot to a fl ood. This means that you will see large differences in the measured fl ux depending on the direction of the lamp being tested. In order to gain the true light output auxiliary correction is required and the bigger the light is the more the hardware starts to absorb some of the light given out. To do this an auxiliary lamp is mounted inside the sphere and the light output measured with the light being tested switched off and measured again when the light to being tested is switched on. The difference in outputs allows you to calculate the degree of self-absorption by the light. This fi gure is then applied as a scaling factor when calculating the lights output. The overall effect is to correct the absorption errors that arise from the lights body inside the sphere.

portable & safe lighting solutions with no...

Documents