Portable Washer/Spinner15 lb. capacityUser GuideIVAPWS15WT

Thank you for purchasing the Ivation portable washer/spinner. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty.

Read and make sure you understand and follow all instructions in this guide before operating this unit. Thoroughly familiarize yourself with the controls and the proper use of the equipment.

Parts1. Water Inlet

2. Wash Timer

3. Wash Selector

4. Spin Timer

5. Spin Water Inlet

6. Wash Cover

7. Wash Tub

8. Pulsator

9. Machine Housing

10. Water Inlet Hose

11. Safety Cover

12. Power Cord

13. Spin Cover

14. Spin Inner Cover

15. Drain Hose

Safety PrecautionsAs with all electrical appliances, safety measures must be observed, including the following:• Caution: Risk of Electric Shock To reduce the risk of electric shock do not attempt to disassemble or alter this device. There are no user-serviceable parts.• This product is intended for private domestic use only. It is not intended for any commercial trade use.• Use this product only for its intended purpose.• Never allow children to have access to this equipment.• Do not plug into an outlet being used by another appliance.• Never put your hand into the tub while the machine is running.• Do not put heavy or heated objects on top of the machine.• Keep machine away from heat-generating equipment.• Do not use or store machine in direct sunlight.• Do not use or store machine in wet or damp areas, or in areas prone to high humidity such as bathrooms.• Do not wash waterproof clothes.• Do not wash clothes heavily soiled with petroleum-based compounds or solvents.• Always make sure the machine is placed on a solid level surface.• Never use the appliance near flammable or combustible objects, liquids, or gases. • Turn off and unplug the appliance before moving or servicing it.• Do not use the appliance if the electrical cord or any parts are damaged.

1

6

7

1011

14

13

15

12

8

9

2 3 4 5

1

PreparationSet the drain hose to drainage.

Plug the power supply cord into an AC outlet with voltage corresponding to the rating label of the appliance. To reduce risk of electric shock, plug into a ground fault circuit interrupter (GFCI) outlet.

Insert the water inlet hose into water inlet connector.

Refer to the water level mark and select the water level according to the volume of laundry to be washed.

OperationWash

Connect drain hose and water inlet hose as described.

Fill with clean water to desired water level

Use cold or room-temperature water

Dissolve laundry detergent in water before adding to the machine

Turn the WASH knob to stir in the dissolved detergent

Put laundry into machine

Use the timer to select washing duration

Select the appropriate wash mode (normal or strong) by turning the NORMAL/STRONG/DRAIN knob. Washing will begin.

Drain

When washing or rinsing is complete, turn the selector knob to the DRAIN position to activate the pump. IMPORTANT! –Turn the knob back to NORMAL when draining is complete.

Intermediate Spin

Move laundry from the wash tub to the spin tub. Arrange laundry uniformly so that the weight is evenly distributed. An unbalanced tug may cause vibration and noise.

Press the laundry down firmly and place the safety cover on top.

Close the outer cover of the spin tub and spin laundry for 1 minute to extract excess water.

Soak/Rinse

Place laundry into wash tub. Set the timer for 1 – 5 minutes. Select water level and wash mode. Let rinse. Drain water.

Spin Dry

Move laundry to the spin tub. Arrange laundry uniformly so that the weight is evenly distributed. An unbalanced tug may cause vibration and noise.

Press the laundry down firmly and place the safety cover on top.

Close the outer cover of the spin tub and spin laundry for 1 – 5 minutes. (Spin duration: 1 minute, 3 minutes, 5 minutes.)

If abnormal noise or vibration occurs, open the spin tub cover and rearrange the laundry. Resume operation.

Wash Water InletSpin Water Inlet Water Tap

Water Inlet

Water Tap

2

Cleaning and MaintenanceUnplug the washer from the power supply.

Clean the machine with a soft damp cloth.

Do not spray water directly onto the machine. If the machine becomes too soiled, add a mild detergent to clean. Do not use petroleum-based detergent to clean the machine.

There will be lint left behind in the overflow filter and the lint filter after each use. These filters need to be cleaned frequently in order to maintain optimal performance of the machine.

Cleaning the Lint Filter

IMPORTANT! – The lint filter must always be in place during washing, and must be cleaned immediately after each use.

Hold the filter frame as shown. Gently press down and pull off.

Wash the filter while it is still wet. Wash only with plain water. Let filter air dry. Do not dry under direct sunlight.

To reinstall the filter, insert the bottom part of the filter frame into the slot, then gently push the filter in to place.

Cleaning the Overflow Filter

Clean the overflow filter at least once every 2 months.

Dismantle the overflow filter. Pinch the flexible-fastening claw; pull it gently away from machine as shown.

Dismantle the bellows. Dismantle the top of the pipe in the overflow filter. Clean the filter under running water.

Reinstall the bellows:

Insert the tie plate of the bottom of valve cover.

Put up the hook at the left top.

Press the top to the slot as shown in picture.

TROUBLESHOOTING

Lint Filter

Do not pull on the pipe

Water leveladjuster Bellows

PROBLEM CHECK FOR POSSIBLE CAUSE The machine does not work Is the power supply on?

Is the power supply cord connected to an outlet? Has laundry inside the machine become tangled in the pulsator?

Unable to drain Has the drain hose been lowered? Is the drain hose frozen? Is the drain hose blocked? Have any clothes fallen outside of the spin tub?

Anormal sound while washing Are there any loose articles in the wash tub

Not enough water in wash tub Is the bellows of the overflow filter being installed correctly?

Abnormal sound and vibration while spinning

Is the machine placed on a flat, level surface? Is the safety cover correctly on top of laundry in the spin tub? Have any clothes fallen outside of the spin tub? Are there too many clothes in the spin tub?

3

SpecificationsWash Tub Capacity: 15.4 lbs. (7kg)

Spin Tub Capacity: 11 lbs. (5kg)

Rated Voltage/Frequency: AC 110V, 60Hz

Wash Motor Rated Power: 480W

Spin Motor Rated Power: 220W

Waterproof Rating: IPX4

Customer Service:

info@myivation.com

866-849-3049

Wiring Diagram

Distributed byC&A Marketing

114-132 Tived Lane EastEdison, NJ

08837 USA

info@myivaton.com

Made in ChinaIvation is a trademark of

C&A IP Holdings, LLC©2016 All rights reserved

4