portfolio :: architectural sheet metal

Photo by: Aerial Innovations of TN, Inc.

Portfolio :: Architectural Sheet Metal

Vine Street Christian Church – Nashville, TN

PROJECT INFORMATION: Renowned Nashville architect, Edwin Keeble, designed the original building in 1957 with a shingle roof. In 1987, our company restored the church steeple with stainless steel. In 2006, RD Herbert replaced the existing shingles on the main sanctuary with

stainless steel chosen for its color, lifespan and as a compliment to the existing steeple.

DETAIL: The new stainless steel batten seam roof on the sanctuary required using engineered battens due to the structural gypsum deck. Other roofs were covered with shingles and fully adhered TPO on multiple roof sections. The white TPO on the flat roofs reflects sunlight and assists with keeping the interior of the building cooler. 20-oz copper flashings, edge metal and built-in gutters finished the roofs.

ADDRESS: 4104 Harding Road Nashville, TN 37210

ARCHITECT: James A. Christian Nashville, TN

ROOF SYSTEM: Stainless Steel 26 ga batten seam roof, CertainTeed Grand Manor shingle & Carlisle 60 mil white TPO roof

ROOF AREA PROFILE: 6,251 square feet stainless steel 6,669 square feet shingle 5,352 square feet TPO Roof Replacement

© RD Herbert & Sons

1407 3rd Avenue North, Nashville, TN 37208 TEL 615 242 3501 FAX 615 256 4056 WEB www.rdherbert.com

.


Harpeth Hall : Daugh W. Smith Middle School – Nashville, TN

PROJECT INFORMATION: Daugh W. Smith Middle School houses girls' studies for grades 5 to 8 along with the dining hall for the entire school. The two-story, 56,000 square-foot building encloses the main lawn and integrates the middle and upper schools.

DETAIL: We installed a new field fabricated standing seam copper roof. Our company also fabricated ten new standing seam copper dormers and provided louver inserts. All the accompanying flashings are 16-oz copper including the chimney, wall, and valley flashings. The built in gutter and downspouts are also 16 oz copper.

ADDRESS: 4104 Harding Road Nashville, TN 37210

ROOF SYSTEM: Copper 16-oz standing seam roof

ROOF AREA PROFILE: 11,000 square feet Roof Replacement




Nashville Public Square – Nashville, TN

PROJECT INFORMATION: The 2006 transformation of the Nashville Metro Courthouse parking lot into a functional park created a true Public Square. Six new buildings flank the South, East and West entrances to the open space. The project also features several historically significant components from the original site including reused granite steps, historical war monuments and commemorative plaques (Nashville Business Journal).

DETAIL: RD Herbert installed Follansbee terne-coated steel flat lock roof panels on six structures. Our metal work included new built-in gutters, downspouts, flashing, and edge metal.

ADDRESS: 2nd Ave & Union Street Nashville, TN 37203

ARCHITECT: Tuck Hinton Architects Nashville, TN

GENERAL CONTRACTOR: Brasfield & Gorrie Nashville, TN

ROOF SYSTEM: Follansbee TCS II 28 ga stainless steel flat lock roof

ROOF AREA PROFILE: 3,800 square feet New Construction



Photo by: Candace Delashmitt


Adventure Science Center: Sky & Space Addition – Nashville, TN

PROJECT INFORMATION: The Adventure Science Center closed its existing Sudekum planetarium in early 2007 to begin demolition for the new 30,000 square foot Sky and Space addition. The initial phase reopened in the summer of 2008 and the remaining portions opened in 2009. This addition included a six-sided metal pyramid wrapped in Berridge’s Natural White Bermuda roof panels on the 14:12 slope. Sitting above a new 63 -foot planetarium dome and rising almost 90-feet into the sky, this feature lights up the Nashville skyline at night with alternating colored LED lights washing up the sides.

DETAIL: Interlacing hip caps march up the sides of the pyramid. White PVC roofing reflects the sunlight offering cooler rooftop temperatures and reduced cooling cost inside the building. Additional sheet metal work includes 24 ga copings, gutter system, counter flashings and scuppers.

ADDRESS:

800 Fort Negley Blvd.

Nashville, TN 37203

ARCHITECT:

Tuck Hinton Architects Nashville, TN

GENERAL CONTRACTOR:

The Parent Company Brentwood, TN

ROOF SYSTEM: Berridge 24 ga Natural White Bermuda roof panels & Carlisle 60 mil white PVC roof

ROOF AREA PROFILE: 13,000 square feet metal 16,922 square feet PVC New Construction / Addition



Photo by: McCauley Aerial Photography


Springfield Courthouse Renovations – Springfield, TN

DETAIL: Old roofing was completely torn off and replaced with new flat lock and standing seam copper, and EPDM roofs. Our metal work included new 16-oz copper coping, gutters, downspouts, flashing, edge metal, balustrades, along with new metal ridge flashing at the bell tower. Repairs to the metal balusters, frieze, and window cornices were also done as part of the renovations.

PROJECT INFORMATION: The center portion of the building was constructed in 1879 with the clock tower and two wings added in 1930. This historic structure in downtown Springfield, Tennessee required extensive exterior renovations in 2006. This building is listed on the National Register of Historic Places.

ADDRESS: 108 Courthouse Springfield, TN 37172

ARCHITECT: Orion Building Group Brentwood, TN

GENERAL CONTRACTOR: Orion Building Group Brentwood, TN

ROOF SYSTEM: Copper 16-oz standing seam/ flat lock roofs & Carlisle 60 mil black EPDM roofs

ROOF AREA PROFILE: 4,639 square feet copper 2,095 square feet EPDM Roof Replacement




Lynwood Blvd Residential Porch Roof – Nashville, TN

DETAIL: The scope of work also includes flashing, edge metal, gutters and a small flat lock roof area. Rather than a downspout the owner chose to use copper rain chains to channel water from the gutter to the ground.

PROJECT INFORMATION: In 2006, RD Herbert installed a complete Rheinzink gutter system and new shingle roof on this log cabin. When the owner was ready to install a new metal porch roof in 2008, he again requested RD Herbert for fabrication and installation.

ADDRESS: Lynwood Blvd, Nashville, TN 37205

GENERAL CONTRACTOR: John Egbert Contractor, Inc. Franklin, TN

ROOF SYSTEM: Rheinzink 24 ga Blue-Gray double-lock standing seam roof

ROOF AREA PROFILE: 1,000 square feet New Construction / Addition




First Baptist Church Nashville – Nashville, TN

DETAIL: The ornate stainless steel cross was fabricated by our custom sheet metal shop and installed along with the 42" diameter copper ball at the end of restoration.

PROJECT INFORMATION: This steeple was originally built in 1866. In 2001, the church contracted with RD Herbert to restore the structure using new flat lock copper roofing while maintaining its historical integrity. Our sheet metal shop reconstructed the detail banding running around the steeple. Rising 190 feet into the air this structure stands out on the Nashville skyline.

ADDRESS: 108 Seventh Ave. South Nashville, TN 37203

ARCHITECT:

R. Chris Magill Architects, Inc. Brentwood, TN

ROOF SYSTEM:

Copper 32-oz flat lock roof

ROOF AREA PROFILE:

2,800 square feet Historic Steeple Renovation



Photo by: Aerial Innovations of TN, Inc.


Werthan Mills Lofts Phase IV – Nashville, TN

PROJECT INFORMATION: The Lofts at Werthan Mills still reflect their original manufacturing purpose, at least at first glance. This complex originally housed a textile mill built in 1871. Preservation, adaptation, and creative re-use of the existing structures turned once dilapidated buildings into vital, distinctive lofts. RD Herbert & Sons Company has been part of the renovations from the start of Phase I.

DETAIL: Phase IV, which included adding a parking garage, new town homes, and renovated outdoor community space created another 119 lofts to the growing development. Both the parking garage and the town homes are wrapped in Una-Clad Dark Bronze wall panels. The town house roof is constructed of Una-Clad 24 ga standing seam panels in Charcoal Gray. Corrugated metal panels in 24 ga Galvalume provide contrast at entrances, the cabana, stairs, and screen walls, reflecting the industrial origins of the complex.

ADDRESS: 1346 Rosa L. Parks Blvd. Nashville, TN 37208

ARCHITECT: Lambert & Associates LLC Franklin, TN

GENERAL CONTRACTOR: Solomon Builders Nashville, TN

ROOF SYSTEM: Una-Clad Charcoal Gray UC1 standing seam roof; Una-Clad 24 ga Galvalume UC-600 roof at stairs, awnings, and cabana

ROOF AREA PROFILE: 21,843 square feet New Construction / Renovation

WALL SYSTEM: Una-Clad 24 ga Dark Bronze UC-500 flush seam wall panels

WALL AREA PROFILE: 14,300 square feet New Construction




East End Lofts – Nashville, TN

PROJECT INFORMATION: East End Lofts is an all new construction of a 4-story condominium building with multiple roof levels. Along with the wall panels, our company also installed shingles and single ply roofing. The top story patios have a single ply system covered by rubber pavers allowing residents to enjoy an outdoor space. The corrugated wall panels bring an urban style to the building.

DETAIL: The scope of work also included the gutter system and 24 ga. Kynar steel flashing, scuppers, rain heads, coping, and metal trim.

ADDRESS: 926 Woodland Street, Nashville, TN 37206

ARCHITECT: Woodson Gilchrist Architects Nashville, TN

GENERAL CONTRACTOR: Construction Enterprises, Inc. Franklin, TN

WALL SYSTEM: Berridge 24 ga Zinc-Cote S-Deck wall panels





Morgan Park Place – Nashville, TN

DETAIL: These four bungalows showcase the vibrancy and variety in panel color choices. Panel colors featured: Slate Grey, Colonial Red, Hunter Green, and Dark Bronze. The rest of the condominium exteriors are a blend of brick and Dark Bronze wall panels.

PROJECT INFORMATION: Morgan Park Place is a new condominium community that is part of the revitalization of north Nashville. Designed as an eco-friendly community, these townhomes promote many options for people looking to minimize their impact on the environment. Metal roofing and wall panels are recyclable building materials and have a long life span.

ADDRESS: Van Buren St Nashville, TN 37208

ARCHITECT: DAAD Group Nashville, TN

GENERAL CONTRACTOR: Lawrence Bros., LLC & New Urban Construction LLC Nashville, TN

WALL SYSTEM: Pac-Clad 24 ga flush seam wall panels





University School of Nashville – Nashville, TN

DETAIL: The finished copper flat lock panels measure 13”x49” and run up the face of the building and turn back inside the first floor ceiling. This was a challenging structure due to the multiple angle changes, large windows and building height. RD Herbert & Sons also installed Una-Clad Flush seam panels around the skylight and a Firestone White EPDM roofing system on the addition.

PROJECT INFORMATION: University School of Nashville renovated & expanded Sperling Center Cafeteria to include additional after school program accommodations, new concessions for athletic events and seating for an additional 60 students. The mezzanine level offers casual seating for the upper class & connections to performing arts classes.

ADDRESS: 2000 Edgehill Ave. Nashville, TN 37212

ARCHITECT: Manuel Zeitlin Architects Nashville, TN

GENERAL CONTRACTOR: American Constructors PO Box 120129 Nashville, TN 37212

WALL SYSTEM: 16 oz Copper Flat Lock Panels





Metal Specialties – Nashville, TN

PROJECT INFORMATION: Metal Specialties are the finishing touches to a roof; details that highlight the building edges, channel rain water and seal a structure while adding character, color and charm to the facade. A wide variety of materials, colors and styles are available for the range of metal specialties. Copper, Stainless Steel, Kynar Steel and Aluminum, and Zinc are just a few of the materials we offer with outstanding results.

CONDUCTOR HEADS:

From timelessly elegant to classic lines, the multitude of styles for conductor heads is endless. These functional pieces add decoration and character to a building.

SPIRES & Finials: These finishing touches can be ornate or quite simple.

CHIMNEY CAPS: Traditionally fabricated from copper, chimney caps serve a functional purpose to keep rain water and animals from entering a home.





GUTTERS & DOWNSPOUTS: Rain water collection systems divert water from the roof to the ground while adding an aesthetic touch to a building's edges. Style options include: built-in, half-round, ogee, or box gutters with either rectangular, round or square downspouts.

COPINGS: Copings protect the top of parapet walls from the elements. A wide variety of color and material choices allow the owner to customize the building. Typical seam options include: lap, cover plate, concealed plate, or standing seam.





EDGE METAL: Edge metal defines and finishes the perimeter of the building.

FLASHINGS: Metal flashings are important at critical junctures of angle or material changes. Typical roof flashings include wall, valley, curb, penetration, step flashings, and counterflashings.



portfolio :: architectural sheet metal

Documents