portfolio - dirk vander kooijdownload.dirkvanderkooij.com/files/press/201407-portfolio.pdf ·...
TRANSCRIPT
Elephant Skin Stools, 2008
Material: Recycled Plastics
The Elephant Skin Stool is created through a
process of baking 100% recycled plastics.
By doing so a matte, wrinkly texture
appears resembling Elephant Skin.
Elephant Skin Table, 2008
Material: Recycled Plastics
The Elephant Skin Table is created through
a process of baking 100% recycled plastics.
By doing so a matte, wrinkly texture
appears resembling Elephant Skin.
Prototype ‘Endless Prototyping’, 2009
Material: Reused Plastics
3d printing is a most precise technique, that
is why it is hard to print a chair, because it is
taking ages to finish one. In furniture you do
not need a precision of 0,01 mm. Endless
Prototyping is a concept, of a extreme low
resolution printer using recycled plastics,
creating a beautiful honest ornament of
stacked lines.
It was Dirk’s graduation project.
PORTFOLIO
Endless Chairs, 2010.
Winner Dutch Design Award 2011
Material: Reused Plastics
This is the archetype, the first chair that
satisfied us. In the beginning the small robot
memory presented some limits that caused
the geometric and jagged look. The
simplicity of the form leaves plenty of room
to do full justice to the “Pulse Structure”. In
the past, the “Pulse Structure” was a given,
we had no choice. We do have a choice
now, nevertheless we faithfully left this
model as is, a sturdy, heavy chair, made up
of thick, wavy lines.
Calculated Chaos, 2011
Material: Reused Plastics / Aluminum Finish
Programmatically speaking, the
‘Calculated Chaos’ chair required a
complete re-imaging of the technical
code. While typically, 3D printed objects
have a clean outer layer and a filling
pattern between, in this case it was peeled
away, leaving the internal filling structure
exposed.
Endless Flow Dining Chair, 2011
Material: Reused Plastics
Characteristic for the Endless Flow dining
chair is the support, a butterfly-look design.
The front and rear legs form triangles that
join one another in the middle and fuse
together. Triangles are a very strong and
reliable construction, while this design
leaves enough flexibility to counteract any
irregularities on the floor.
Satellite Lamp, 2011
Material: Glass like Synthetics
This floor lamp was built up using the robot,
the layered structure breaks and scatters
the light pleasantly. The lamp consists of
three circular light sources which can be
separately adjusted for intensity and
warmth. Two large knobs that work like a
mixing tap control the light: one knob for
warm and one for cold. By directing the
light towards the wall, it produces splendid
concealed lighting.
PORTFOLIO
All Material Table, 2011
Material (Photo): PolyEthylene, Copper and
Ashwood
The table table is built up out of ingots. An
ingot is one chunk of pure material without
any contamination, the goldbar for
example. The table could exist out of 100
kilo of copper ingots. All Material is in that
way a design object as well as a
investment in raw materials. All materials
are possible, if the materials could be
applied solid and pure.
Endless Flow Rocking Chair, 2011
Material: Reused Plastics
As with the Endless Flow Low Chair, it took
54 prototypes before we achieved the
optimum comfort the chair now offers. The
chair has a distinct similarity to a
thoughtfully wound up ball of string. This
can only be done with the Endless
production technique.
Endless Flow Coffee Table, 2011
Material: Reused Plastics
The relatively large size of the table top has
a beautiful pattern of lines. The support
grows down from the table top to form the
legs that come together in the middle. The
Flow Coffee Table nicely illustrates that the
Endless production technique not only
inspires, but requires unparalleled styling as
well.
Triangulate Lamp, 2012
Imagine buying some object, made up out
of all these little triangles, but after a while
one comes across a more appealing
design. One simply disassembles the object
and reassembles a more attractive design.
And it's all done without using any tools!
Recycling is no longer necessary... This lamp
looks like a geometric cloud. A small lamp,
or a slightly bigger one for above a table,
or even enormous clouds for public spaces.
Dirk presented this lamp during Bejing
Design Week.
PORTFOLIO
Y-Table, 2012
Material: Reused Plastics
Bruls & Co asked Dirk Vander Kooij to come
up with a design for the tables of the lobby
of the Theatre in Maastricht, The
Netherlands.
Endless Flow Open Rocking Chair, 2012
Material: Reused Plastics
Working, dining & lounging... Now
combined in one chair.
Chubby Chair
Material: Reused Plastics
Precise as toothpaste. Heavy like oak.
Colors like pure paint. Designed by a clown.
Chubby Coat Hanger, 2012
Material: Reused Plastics2
When our robot is changing colours it spills
some material. We are using this material to
create a Chubby Coat Hanger. Because
each color transition is different every single
coat hanger is unique.
PORTFOLIO
Fat Line Table, 2013
Material: Reused Plastics, Rubber Top
Introducing the Fat Line Table: a
combination of the comfort of a rubber
desk top with the rock solid features of the
Endless material. The Fat Line Table comes
in different colors and sizes.
Diffuser Cabinet, 2013
Material: Tulip wood, Tung Oil Finish
The Diffuser Cabinet is a result of acoustic
studies. A mathematical principle shapes
the cabinet design-wise, resulting in an
ornament that optimizes the acoustic
performance of your room. Acoustics are
often neglected, but not with the Diffuser
Cabinet. The cabinet does not remove
sound energy, but can be used to
effectively reduce distinct echoes and
reflections, while still leaving a live sounding
space.
New Babylon Chair, 2013
Material: Tulip wood, Tung Oil Finish
The New Babylon Chair is built up with thin
lines of reused plastics resembling a silk like
colour pattern. It comes with a comfortable
pod shape with cushion.
PORTFOLIO
Melting Pot Side Table, 2013/2014
Material: Reused Plastics2
It just takes once adding too little raw
material while producing an Endless chair
to end up with a wastrel. A lot of waste is
also left over after testing periods for new
products.
We realized that this was a unique material.
We kept and sorted all of this waste; such
big chunks clean and recycled plastic
each with its own history, identity and color
pattern, it is hard to find anywhere.
With this material in mind, Dirk designed the
Melting Pot. Like a true chef de cuisine, we
melt big chunks of chair or table into a very
stylish little side table. The material that
emerges is so dense that it practically looks
and feels like marble.
The form of the Melting Pot (Side) table is
elementary, sturdy and practical. The table
is made of a massive cone that perfectly
fits the likewise massive round table top.
Quite beautiful patterns of color emerge
during the production process; no two
specimens are the same.
Changing Vase, 2013
Material: Reused Plastics2
Each Changing Vase is a deliberately
distorted take on the profile of a traditional
vase. The result is a unique perspective that
changes depending on where the viewer
stands. The vases are created using leftover
granules, shredded recycled plastics, from
other Dirk Vander Kooij products. We are
already using waste material for our
products, but there are always little bits of
material left over. Throwing the material
away is a waste of resources. Besides that,
the material’s attractive earthly colors are
an asset.
PORTFOLIO
Lenses Vase, 2013
Material: Reused Plastics
New Babylon wanted a large object in the
lobby. It was to be a three meter high vase.
The largest one printed ever, done in crystal
clear synthetic material. The sober design
contrasts the surrounding rich decoration.
Each "little loop" has the form of a lens
which creates a shimmering effect. The
incoming day light is reflected and lights up
the whole vase. When it's dark, the vase is lit
by no less than 12,000 LEDS!
In a short period of time "the Vase" has
grown into a meeting point and as such it
has become an icon for New Babylon.
Soap Cabinet, 2014
Material: Reused plastic bubbles
Wooden shelves
The Soap Cabinet has bubbles everywhere
which contrasts beautifully with the clean
lines of the wooden shelving.
PORTFOLIO
Fresnel Suspending Lamp, 2014
Material: Reused Polycarbonate
Inspired by the Fresnel Lens we created a
pendant lamp. Just like a Fresnel Lens you
can direct the light by tilting the lamp a
little.
RvR Chair, 2014
Material: Reused Plastics
The RvR Chair is a stackable chair. It's an
elementary and therefore ageless design.
The Chubby Chair formed the basic
principle, except now it will be in one
piece. A Chubby in one piece has been a
cherished wish of Dirk for a long time and
with the new robot arm we are now
capable of moving the Chubby directly
from the production plate into the mold
where it gets its ultimate form.
The result is a beautifully layered line
pattern of intertwining legs and armrests -
like someone said similar to an Escher
drawing. Moreover, the interplay of lines
reveals how the chair is made.
Fat Line Coat Rack, 2014
Material: Reused Plastics
Wooden Rods
The Coat Rack system consists of simple
elements with thick lines recycled plastic.
These elements keep three wooden rods
fixed, the top two are a hats or bags
plateau, the lower one coat. The system
can be produced in any length. For longer
lengths, are more wall elements used.
PORTFOLIO
Not Only Hollow Chair, 2014
Material: Reused Plastics
At Studio Dirk Vander Kooij, techniques are
developed to make a better world. The
chair is created with a completely new,
high-tech process. An in-house developed
robot melts plastic, in to a pipe like shape
and then carefully writes out the shape of
this chair, somewhat like 3d printing.
Each line is hollow to minimize resources,
and the source is 100% recycled synthetics.
The minimalistic shape and the extremely
low resolution make the looks of the chair
closely related to how it's made.
It is not only recycled or minimizing
resources, it's not only a new developed 3d
printing process, it is not only a catchy
design piece...
The true beauty lies in the combination of it
all.
PORTFOLIO