poster and demonstration of expanding rural cellular ... · expanding rural cellular networks with...

1
Poster and Demonstration of Expanding Rural Cellular Networks with Virtual Coverage Kurtis Heimerl [email protected] UC Berkeley Kashif Ali [email protected] UC Berkeley Joshua Blumenstock [email protected] University of Washington Brian Gawalt [email protected] UC Berkeley Eric Brewer [email protected] UC Berkeley Abstract Cellular phones and related network equipment comprise the world’s largest network, providing service to over five billion unique users. Operators of these networks face fundamental trade-offs in coverage, capacity and operating power. These trade-offs, when coupled with the reality of infrastructure in poorer areas, mean that upwards of a billion people lack access to this critical infrastructure [2]. Limited power infrastructure, in particular, hampers the economic viability of wide-area rural coverage. In our related work to be presented at NSDI ’13 [1], we present an alternative system for implementing large- scale rural cellular networks. Rather than providing constant coverage, we instead provide virtual coverage: coverage that is only present when requested. Virtual coverage powers the network on-demand, which reduces overall power draw, lowers the cost of rural connectivity, and enables new markets. We demonstrate our prototype cellular system utiliz- ing virtual coverage: a modified GSM base station and set of Motorola phones to support making and receiving calls under virtual coverage. To support the billions of already-deployed devices, we also demonstrate a small radio capable of adding backwards-compatible support for virtual coverage to existing GSM handsets. As explained in our work, these systems benefit from a maximum of 84% power savings and 83% power cost savings from using virtual coverage. Demonstration Our demonstration will consist of the following pieces of equipment: A modified Range Networks [3] 5150 GSM Base Transceiver Station (BTS) A modified Motorola C155 Handset A custom-built integrated circuit Figure 1: The Wake-up Radio custom IC and 5150 BTS Specifically, we will first demonstrate the BTS’s support for a “low-power” mode; and the actual amount of power saved (using a Watts-up power meter). We will then demonstrate both the modified handset and the custom radio waking the tower from its idle state. Lastly, we will show that each handset is then able to connect to the tower and initiate a communication. References [1] K. Heimerl, K. Ali, B. Gawalt, J. Blumenstock, and E. Brewer. Expanding rural cellular networks with virtual coverage. In Proceedings of the 10th USENIX symposium on Networked systems design and implementation, NSDI’13, 2013. [2] H. Horst and D. Miller. The Cell Phone: An Anthropology of Communication. Berg Publishers, October 2006. [3] Range Networks. http://www.rangenetworks.com/. Retrieved 8/2012.

Upload: trinhnhan

Post on 07-Sep-2018

219 views

Category:

Documents


0 download

TRANSCRIPT

Poster and Demonstration ofExpanding Rural Cellular Networks with Virtual Coverage

Kurtis [email protected]

UC Berkeley

Kashif [email protected]

UC Berkeley

Joshua [email protected]

University of Washington

Brian [email protected]

UC Berkeley

Eric [email protected]

UC Berkeley

Abstract

Cellular phones and related network equipment comprisethe world’s largest network, providing service to overfive billion unique users. Operators of these networksface fundamental trade-offs in coverage, capacity andoperating power. These trade-offs, when coupled withthe reality of infrastructure in poorer areas, mean thatupwards of a billion people lack access to this criticalinfrastructure [2]. Limited power infrastructure, inparticular, hampers the economic viability of wide-arearural coverage.

In our related work to be presented at NSDI ’13 [1],we present an alternative system for implementing large-scale rural cellular networks. Rather than providingconstant coverage, we instead provide virtual coverage:coverage that is only present when requested. Virtualcoverage powers the network on-demand, which reducesoverall power draw, lowers the cost of rural connectivity,and enables new markets.

We demonstrate our prototype cellular system utiliz-ing virtual coverage: a modified GSM base station andset of Motorola phones to support making and receivingcalls under virtual coverage. To support the billions ofalready-deployed devices, we also demonstrate a smallradio capable of adding backwards-compatible supportfor virtual coverage to existing GSM handsets. Asexplained in our work, these systems benefit from amaximum of 84% power savings and 83% power costsavings from using virtual coverage.

Demonstration

Our demonstration will consist of the following pieces ofequipment:

• A modified Range Networks [3] 5150 GSM BaseTransceiver Station (BTS)

• A modified Motorola C155 Handset• A custom-built integrated circuit

Figure 1: The Wake-up Radio custom IC and 5150 BTS

Specifically, we will first demonstrate the BTS’ssupport for a “low-power” mode; and the actual amountof power saved (using a Watts-up power meter). Wewill then demonstrate both the modified handset and thecustom radio waking the tower from its idle state. Lastly,we will show that each handset is then able to connect tothe tower and initiate a communication.

References

[1] K. Heimerl, K. Ali, B. Gawalt, J. Blumenstock,and E. Brewer. Expanding rural cellular networkswith virtual coverage. In Proceedings of the 10thUSENIX symposium on Networked systems designand implementation, NSDI’13, 2013.

[2] H. Horst and D. Miller. The Cell Phone: AnAnthropology of Communication. Berg Publishers,October 2006.

[3] Range Networks. http://www.rangenetworks.com/.Retrieved 8/2012.