POTENTIOMETERS

All of the following pots have 1/4" dia. shafts and3/8" dia. (3/8-32) or 7mm threaded bushings, unless otherwise specified. Shafts may be full-round, half-round or knurled.

VISIT OUR WEBSITE - WWW.AllElEcTRONIcS.cOM

LINEAR POTS WITH 1/4” DIA. SHAFT

50K LINEAR TAPER POT Alpha #B50K with ON-OFF switch. 6mm dia. split knurled shaft. 7mm threaded bushing. S.P.S.T. switch is off at full counter-clock-wise direction. CAT# PTL-50K 85¢ each

10K LINEAR PRECISION POTTokos / Cosmos# RV Q24YN 15F B 103 High-quality, 10K Ohm, 1/4W carbon film potentiometer designed for long-life. Very smooth, precise rotation, designed for 500,000 cycles. 6mm dia. x 5mm long flatted shaft. 9mm threadedbushing. 24mm dia. body. Solder-lug terminals. CAT# LPT-10K $2.00 each 10 for $1.75 each • 100 for $1.60 each

PRECISION POTS WITH 1/4” DIA. SHAFT, USED

All of the following pots have 1/4" diameter half-moon shafts and 3/8" diameter (3/8-32) threadedbushings. Removed from equipment. May haveshort wires soldered to terminals.

10K OHM LINEAR TAPER Spectrol/ Vishay Model 157. 1-piece aluminum housing. Ceramic sealed back. 1 Watt power rating. Conductive plastic element. May have writing or test marks. CAT# PPT-10KLU$1.00 each • 10 for 80¢ each

2K OHM LINEAR TAPER Spectrol Model 533. Precision 3-turn wirewound potentiometer. 1 Watt power rating. 22mm dia. x 19mm long body. CAT# PP-2KU$1.00 each • 10 for 80¢ each

10K OHM LINEAR TAPER Spectrol Model 138. High-quality. 2W power rating. Conductive plastic element. Molded, glass-filled thermo-plastic housing, 33mm (1.3") diameter body. CAT# POP-10KLU$1.00 each • 10 for 80¢ each

DUAL 100K LINEAR6mm diameter shaft. 7mm diameter bushing.CAT# PTD-100K 75¢ each

POT W/ 6MM DIA. SHAFTDual 10K audio taper. 6mm flatted shaft. 7mm threaded bushing.CAT# DPA-10K 65¢ each

10K BOURNS POT, PRE-WIREDBourns 82A1AC28BA0728. 2W, single-turn cermet. New pot, prepped with three 6" wire leads.CAT# PTW-10K $2.75 each

62

10 OHM 5W WIREWOUND POTCTS #026TA20R100B1A3. Solder-lugs.CAT# PT-10 $2.50 each 100 for $2.25 each

POTS WITH 6MM DIA. SHAFT

LINEAR TAPER POTS6mm x 10mm long slotted knurled shaft and 7mm threaded bushing. Solder lugs. Available values 500 OHM, 1K, 2K, 5K, 10K, 20K, 50K, 100K, 200K, 500K, 1M, 1.5M and 2M.CAT# NLTP-XX (no mixing values)XX=value in ohms, i.e. NLTP-200K75¢ each • 10 for 65¢ each

15 MEG Solder-lugs.CAT# LTP-15M75¢ each

AUDIO TAPER POTS6mm dia. knurled shaft. 7mm threaded bushing. Solder terminals. Available values 1K, 5K, 10K, 25K, 50K, 100K, 200K, 500K and 1M.CAT# NATP-XX (no mixing values)XX=value in ohms, i.e. NATP-200K2 for $1.50 • 10 for 65¢ each

100K LINEAR TAPERTwo built in switches, a rotary on-off switch and a momentary push-switch. Also has multiple detents across entire rotation. Knurled split shaft. 7mm threaded bushing mount. PC pins. 9.5 x 11mm body. 30mm overall length. Tocos.CAT# PWS-104 $1.20 each

20K LINEAR POT20K linear pot with 6mm x 10mm long slottedknurled shaft and 7mm threaded bushing. PC mount.CAT# TPL-20K 50¢ each10 for 45¢ each

1K/10K POT W/ CONCENTRICSHAFTS & SWITCH1K/10K stacked design allows you to have two pots in one mounting hole. Built-in rotary on-off switch, (off = left). 4mm flatted inner shaft. 6mm dia. outershaft. 10mm coarse thread bushing mount. Note:We don't have nuts for these. Right angle, PCpins. 20mm x 19mm body. 58mm overall length.CAT# PWS-110 75¢ each

NEW

ORDER TOLL FREE 1-800-826-5432

1K OHM MULTITURN TRIMMER Vishay T93YB 1K 10% multiturn trimmer. 10 x 10 x 5mm. Triangle lead pattern, outer legs on 5mm centers.CAT# MTP-1K $1.25 each

MULTITURN TRIMMER POT Precision 20-turn trim pot. 3/8" square, top-adjust. Leads in straight row on 0.10" centers. Available values: 500, 50K, 1MEGCAT# MTPS-XXX $1.25 eachXXX=value in ohms, ie MTPS-1MEG

RECTANGULAR TRIMMER0.75" X 0.19" high. 3/4 watt. Comparable to Bourns 3006P, Beckman 89PR, Weston 830P, AB 94P. Available values: 2K, 2.2K, 5K, 10K, 100K, 500KCAT# RTP-XXX $1.25 eachXXX=value in ohms, ie RTP-2.2K

PRECISION MULTI-TURN TRIMMERS

SLIDE POTS

SLIDE POTS, 65MM TRAVELSlide potentiometers with mounting holes on 80mm centers. Slide travel, 65mm. Overall length, 88mm. Metal sliders, 1.2mm thick x3.5-4mm at tip. Single-element if not otherwisenoted. “C-detent” indicates a center-detent, a tactile bump in the center of slide travel.

Res. Taper Desc CAT# Price 10+20K Linear C-detent SLP-20KS $1.00 80¢50K Linear 2-ele.,C-det. SLP-50K $1.00 80¢50K Linear C-detent SLP-50KS $1.00 80¢100K Audio 4-element SLP-100K4A $1.00 80¢

MULTITURN TRIMMERS1/4W cermet trimmers. 6 x 7 x 4mm. Triangle pc pin pattern.

CAT# EACHTop Adjust 500 Ω TPR-500 $1.25 Top Adjust 10K TPR-10K $1.25Side Adjust 1M TPS-1M $1.25

20K LINEAR SLIDE POTBourns # SSHA20B20300. Low-profile, unenclosed slide pot. 0.85" travel. Four pc leads on 1.17" x 0.33" centers. CAT# SP-20K 2 for $1.00

63

1 MEG Ω THUMBWHEEL TRIM POT 0.7" dia., old-style trim pot. PC leads on 0.4" centers. Center wiper terminal is on opposite side from other leads.CAT# TPT-1M 10 for $1.00 100 for 6.5¢ each • 500 for 4¢ each

SINGLE TURN TRIMMER POTS7mm square trimmer. Two leads are on 5mm centers. Middle (wiper) lead is 5mm from the center of the other leads. Available values: 500, 5K, 10K, 20K, 100K, 150K, 500K CAT# TPS-XXX (no mixing values)XXX=value in ohms, ie TPS-10K4 for $1.00 • 100 for 18¢ each

32 Ω WIRE-WOUND TRIMMER 20mm dia. Screwdriver adjust. Two mounting ears with holes on 1" centers.CAT# TPW-32 50¢ each

15 watt 8 ohm mono L-Pad for level adjustment. For installation in speaker cabinets. Includes 2" dia. plate, mounting nuts and a black plastic knob. 3/8" panel hole. CAT# 8MLP $5.75 each

8 OHM L-PAD, MONO 15W

1/8" diameter half-moon shaft. 7mm threaded bushing. PC mount.CAT# APT-10KD $1.00 each

10K X 2 AUDIO TAPER

6mm diameter shafts, 0.5” long minimum. Non-threaded bushing.Resistance Taper Other desc CAT#10K Audio Dual element APD-10K20K Linear Single element LP-20K100K Audio Dual element APD-100K

All pots above are 4 pcs of one CAT# for $1.00100 pcs of one CAT# $15.00 (no mixing)

PC MOUNT POTS

NEW

2.5K OHM MINI-POT W/ LOCKING SHAFTPrecision Electronics# SLU2521S20 2.5K, RV6LAYSA252A. 2.5K Ohm 1/2W carbon linear potentiometer.Screwdriver adjust, locking 1/8" shaft. 1/4-32 NEF-2A threaded bushing. Includes hardware. 0.52" di-ameter x 0.48" body. Solder-loop terminals.CAT# LPT-252 $4.75 each 1K VERTICAL ADJUST

Piher #PT10LV0 1K 20%. 10mm diameter cermet trimmer. Outer PC pins on 5mm centers. CAT# TPR-1K 5 for $1.00 • 100 for 15¢ ea.

10K ALLEN BRADLEY TRIMMERAllen Bradley Type E. 10K Ω, single-turn trimmer potentiometer. 10mm square. PC leads in triangular pattern, 5mm centers w/ wiper lead in middle.CAT# TRP-10K 2 for $1.00

SINGLE TURN TRIMMERS

TOP ADJUST 3/8" square x 3/16" high. 1/2 watt. Comparable to Bourns 3386P, Beckman 72PR and Spectrol 63P. Ohms CAT# each 10500 STP-500 50¢ 40¢20K STP-20K 50¢ 40¢50K STP-50K 50¢ 40¢

Fits CAT# KNB-284, KNB-332 and other knobs with hex-head set screws.CAT# AW-2 2 for $1.00100 for $30.00

1/16” ALLEN WRENCH

KNOBSKNOBS FOR 1/4” SHAFT

Black aluminum instrument knob. Serrated circumference. 0.50" diameter x 0.79" high. White pointer line. Two set screws.CAT# KNB-284 $2.00 each 10 for $1.85 each Black fluted phenolic knob with brushed aluminum face and white pointer line. 0.75" diameter at base x 0.47" high. Brass insert with hex-head set screw.CAT# KNB-332 $1.25 each

FAX YOUR ORDER 24 HOURS A DAY (818) 781-2653

33mm diameter x 12mm high off-white plastic knob for 1/4" flatted shaft. Metal insert. CAT# KNB-23950¢ each • 10 for 45¢ each

KNOBS FOR 1/8” SHAFT

Dark-brown plastic knob with metal insert. Fits 1/8" dia. half-round shaft. 0.9" diameter x 0.53" high. Serrated circumference.CAT# KNB-218 65¢ each

Black plastic knob with raised white pointer line. Brass inserts and set screws. 0.45” diameter skirt at base, 0.31” diameter at top, 0.40” high. CAT# KNB-127 $1.10 each10 for 95¢ each

BLACK PLASTIC KNOBRaised red face with black pointer line. 0.38" dia. top, 0.52" dia. base, 0.65" high. CAT# KNB-125 50¢ each10 for 45¢ each

KNOB W/ POINTER LINE0.71” diameter x 0.68” high black plastic knob with white pointer line on face. Ribbed circumference. CAT# KNB-219 60¢ ea. • 10 for 50¢ ea.

SOFT TOUCH KNOB Dark gray rubberized pointer knob. Light grey raised pointer line and base. 0.40" dia. top, 0.52" dia. skirt, 0.70" high.CAT# KNB-126 65¢ ea. • 10 for 50¢ ea.

RUBBERIZED POINTER KNOB White raised pointer line. 0.40" dia. top, 0.53" dia. skirt, 0.63" high. CAT# KNB-269 65¢ ea. • 10 for 55¢ ea.

64

Black plastic knob for 1/8" round shaft with raised face, serrated circumference and raised white pointer line down one side. 0.52" diameter x 0.60" high. Brass insert and set screw. Available with red (KNB-283R), green (KNB-283G), blue (KNB-283BL) or yellow (KNB-283Y) face.CAT# KNB-283R, G, BL, Y $1.00 each

SERRATED BLACK KNOB 18mm dia. x 15mm high plastic knob. Serrated circumference. Flat, plain face. CAT# KNB-248 55¢ each

KNOBS FOR 6MM KNURLED SHAFT

POINTER KNOB Black plastic knobs for 6mm shaft with raised colored face, serrated circumfer-ence and raised white pointer line down one side. 0.50" dia. x 0.60" high. Brass insert and set screw. Available with blue (BL), black (BK), red (RD), green (GN) & yellow (YL) faces.CAT# KNB-267XX (XX=color i.e KNB-267BL)75¢ each • 10 for 65¢ each

POINTER KNOBSBlack plastic knob with raised face, serrated circumference and raised white pointer line.Brass insert with set screw.

19MM DIAMETER x 16.5MM HIGHRed face CAT# KNB-281RBlack face CAT# KNB-281B85¢ each • 10 for 75¢ each 25MM DIAMETER x 16.5MM HIGHRed face CAT# KNB-282RBlack face CAT# KNB-282B95¢ each • 10 for 85¢ each

Raised red face, black serrated circumference and raised white pointer line. 0.52" dia. x 0.60" high. Brass insert and set screw. CAT# KNB-124 75¢ each10 for 65¢ each

5K AUDIO MINI-SLIDE POTBody dimensions, 30 x 8 x 7mm high. Tapped mounting holes on 26mm centers. Slide travel, 17mm. PC terminals. CAT# SP-5KA 2 for $1.00

20K DUAL SLIDE POT Two-element 20K audio slide pot with brush-ed aluminum face plate and rubberized, soft-touch knob. Smooth, even feel. 2.37” travel. Pot is prepped with a 5-pin connector (0.1” spacing). Metal face plate is 3.47” x 1.27”.CAT# SLP-20KAX2B $4.25 each10 for $4.00 each

Apem # MKCB-500B-1/8-7. Black, machined aluminum control knob. 0.5” dia. x 0.32” high. Top portion of knob is rectangular, 0.49” x 0.22” x 0.44” high. A black pointer groove is etched into one side of knob. Two set screws. CAT# KNB-231 $1.50 each 25 for $1.35 each • 100 for $1.15 each

KNOBS FOR 6MM KNURLED SHAFTBlack plastic knob with serrated circumference. Bronze face with pointer dot. 0.9” dia. at base, 0.8” dia. at top. 0.54” high. Shank, 0.38” long x 0.43” dia. Note: Removed from equipment. Good condition, but the shanks show signs of wear.CAT# KNB-260 45¢ 35¢ ea. 10 for 30¢ ea. • 100 for 20¢ ea. REDUCED