powder spray gun

1
POWDER SPRAY GUN U.S. Patent 5,816,508. Oct. 6, 1998 T.E. Hollstein and J.R. Shutic, assignors to Nordson Corp., Westlake, Ohio A powder spray gun with rotary distributor. ABRASIVE SHEET U.S. Patent 5,816,902. Oct. 6, 1998 N. Watanabe et al., assignors to Nihon Micro Coating Co. Ltd., Japan An abrasive sheet comprising a flex- ible base sheet; mutually separated threads, which are evenly planted on said base sheet; and abrasive particles attached evenly over a specified length of the threads. REMOVING COATINGS FROM THERMOPLASTIC SUBSTRATES U.S. Patent 5,817,183. Oct. 6, 1998 V.J. Eddy-Helenek and A.K. Simonian, assignors to General Electric Co., Schenectady, N.Y. A method for salvaging a thermo- plastic substrate, which has been treated with a decorative or pro- tective coating, comprising treat- ing the discarded thermoplastic substrate in a coating removal so- lution consisting of by weight 40 to 95% water, 5 to 60% of an al- kaline material, and 0.01 to 20% of a surfactant at a temperature between 60 to 100°C with agita- tion and at a pH of 10 to 14 for a period of time sufficient to sub- stantially remove the coating from the discarded thermoplastic substrate; rinsing the treated thermoplastic substrate with a first aqueous rinse solution, fol- lowed by a dilute acidic aqueous rinse solution, and followed with a second aqueous rinse solution until the pH of the resulting run- off rinse solution is neutral; and drying the resulting rinsed ther- moplastic substrate. CLEANING COMPOSITION FOR METAL U.S. Patent 5,817,186. Oct. 6, 1998 T.F. D'Muhala et al., assignors to Corpex Technologies Inc., Morrisville, N.C. A method of decontaminating a surface comprising contacting the surface with a composition com- prising 30 to 70% by weight of a terpene-based component, 1 to 15% of an amine, 1 to 20% of a surfactant, and 5 to 50% of an alpha olefin sulfonate or alkoxy sulfate so as to decontaminate the surface. PAI"rENNED ABRASIVE U.S. Patent 5,817,204. Oct. 6, 1998 N.N. Tselesin, assignor to Ultimate Abrasive Systems L.L.C., Atlanta Filtration systems.., give you The full-line of rugged Slim-Line, LI'L Guy & Lt'L Guy II Systems give you the benefits of a superior proprietary horizontal disc plate filter system. II superior filtration at higher flow rates I superior dirt holding capacity I superior filter plate cleaning, fast & efficient Select from a full line of filters and the low to high flow capacity that fits your needs... get all the facts in our FREEspecifications guide--ask for it. Forfastfacts OR Anode FilterSystems www, anodeproducts, com Toll.Free 800*255*7224 9425 Seymour Avenue Schiller Park, Illinois 60176 USA -| ANODE PRODUCTS Circle 007 on reader information card March 1999~ 87

Upload: dotuong

Post on 31-Dec-2016

213 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Powder spray gun

POWDER SPRAY GUN U.S. Patent 5,816,508. Oct. 6, 1998 T.E. Hollstein and J.R. Shutic, assignors to Nordson Corp., Westlake, Ohio

A powder spray gun with rotary distributor.

ABRASIVE SHEET U.S. Patent 5,816,902. Oct. 6, 1998 N. Watanabe et al., assignors to Nihon Micro Coating Co. Ltd., Japan

An abrasive sheet comprising a flex- ible base sheet; mutually separated threads, which are evenly planted on said base sheet; and abrasive particles attached evenly over a specified length of the threads.

REMOVING COATINGS FROM THERMOPLASTIC SUBSTRATES U.S. Patent 5,817,183. Oct. 6, 1998 V.J. Eddy-Helenek and A.K. Simonian, assignors to General Electric Co., Schenectady, N.Y.

A method for salvaging a thermo- plastic substrate, which has been treated with a decorative or pro- tective coating, comprising treat- ing the discarded thermoplastic substrate in a coating removal so- lution consisting of by weight 40 to 95% water, 5 to 60% of an al- kaline material, and 0.01 to 20% of a surfactant at a temperature between 60 to 100°C with agita- tion and at a pH of 10 to 14 for a period of time sufficient to sub- s t an t i a l l y remove the coat ing from the discarded thermoplastic subs t ra te ; r ins ing the t r ea t ed thermoplastic substrate with a first aqueous rinse solution, fol- lowed by a dilute acidic aqueous rinse solution, and followed with a second aqueous rinse solution until the pH of the resulting run- off rinse solution is neutral; and

drying the resulting rinsed ther- moplastic substrate.

CLEANING COMPOSIT ION FOR METAL U.S. Patent 5,817,186. Oct. 6, 1998 T.F. D'Muhala et al., assignors to Corpex Technologies Inc., Morrisville, N.C.

A method of decontaminating a surface comprising contacting the surface with a composition com- prising 30 to 70% by weight of a terpene-based component, 1 to 15% of an amine, 1 to 20% of a surfactant, and 5 to 50% of an alpha olefin sulfonate or alkoxy sulfate so as to decontaminate the surface.

PAI"rENNED ABRASIVE U.S. Patent 5,817,204. Oct. 6, 1998 N.N. Tselesin, assignor to Ultimate Abrasive Systems L.L.C., Atlanta

Filtration systems.., give you

The full-line of rugged Slim-Line, LI'L Guy & Lt'L Guy II Systems give you the benefits of a superior proprietary horizontal disc plate filter system.

II superior filtration at higher flow rates I superior dirt holding capacity I superior filter plate cleaning, fast & efficient

Select from a full line of filters and the low to high flow capacity that fits your needs... get all the facts in our FREE specifications guide--ask for it.

For fast facts OR Anode Filter Systems www, anodeproducts, com

Toll.Free 800*255*7224

9425 Seymour Avenue Schiller Park, Illinois 60176 USA

- | ANODE PRODUCTS

Circle 007 on reader information card

March 1999~ 87