POWDERS (part 2)

Part II

Author: Author:

asasss.. Yu.Yu.Yu.Yu. PlaskonisPlaskonis

POWDERS are solid dosage forms for internal and external application consisting of one or some medicinal substances and having a loose property

POWDERS WITH POISONOUS AND STRONG-EFFECTIVE SUBSTANCES

Signature_____________________________Name of localityPharmacy №________ Prescription №_______Surname, initials and age of the patient Rp:Surname, initials of the doctor__________________Prepared___________________________________Checked___________________________________Dispensed__________________________________Date___________ Price _______________

1-st case is when poisonous and strong-effective substances prescribed in the prescription in amount more than 0.05g;

2-nd case is when poisonous and strong-effective substance prescribed less than 0.05g.

Example:

Rp.: Osarsoli 2.5Glucosi 10.0Acidi borici 1.0Misce, fiat pulvisDivide in partes aequales N 10Signa. For external use.

WCP (reverse side):

Osarsoli 2.5Glucosi 10.0Acidi borici 1.0m = 2.5 + 10.0 + 1.0 = 13.5; weight of one dose 13.5:10 = 1.35

WCP (front side):

Date № prescription. Glucosi 10.0

Асidi borici 1.0 Osarsoli 2.5 m (of one dose) 1.35 № 10 Has prepared: Has checked up:

Request

Has issued: Osarsoli 2.5 Series № Date Signature

Has received: Osarsoli 2.5 Series № Date Signature

The 2-nd case: when poisonous, narcotic and strong-effective substances written out in the prescription in the quantity less than 0.05 g, it is necessary to use trituration for preparation of powders because it is impossible to weigh a quantity less than 0.05 g on HB-1 (1 g hand balances).

Trituration are mixtures of poisonous or strong-effective substance with indifferent excipients (lactic sugar).

The lactic sugar (Saccharum lactis) is used more often as an excipient. It can be explained that the lactic sugar has some advantages in comparison with other indifferent substances.

Usually trituration from poisonous substances dosed in mg and prepared in the ratio of 1:100 (i.e.1 portion of poisonous substance and 99 parts of lactic sugar). When substances are prescribed in santigramms it is necessary to use trituration in the ratio of 1:10 (i.e. 1 portion of substance mixed with 9 parts of lactic sugar).

Rp. Platyphyllini hydrotartratis 0,0025

Papaverini hydrochloridi 0,02Sacchari 0,35Misce, fiat pulvisDa tales doses N 10Signa. 1 powder 3 times a day.

WCP (reverse side):

Platyphylline hydrotartrate 0.0025х10 = 0.025

Triturations of platyphylline hydrotartras (1:10) 0.025х10 = 0.25

Papaverine hydrochloride 0.02х10 = 0.2Sugar 0.35х10 = 3.5 3.5 – 0.25 = 3.25Weight of one dose: (0.25 + 0.2 + 3.25) /10

= 0.37

WCP (front side):

Date prescription № Sacchari 3.25 Triturationis Platyphyllini hydrotartratis

(1:10) 0.25 series № Papaverini hydrochloridi 0.2 0.37 № 10 Has prepared: Has checked up

Request

Has issued: Triturationis Platyphyllini hydrotartratis (1:10) 0.25

Date Series № Signature

Has received: Triturationis Platyphyllini hydrotartratis (1:10) 0.25

Date Series № Signature

POWDERS WITH DYEING SUBSTANCES.

Dyeing substances: • acriquin, • methylene dark blue,• diamond green,• riboflavine, • etacridine lactate,• furaciline, • potassium permanganate

etc.

Coloured substances:• dermatol, • quinosol, • protargol etc.

POWDERS WITH DYEING SUBSTANCES

•Dyeing medicinal substances, as well as their solutions, mixtures leaving a coloured trace on containers, parking materials, equipment and other subjects belong to the 1-st group. This trace is impossible to wash out by usual sanitary and technical processing. They are stored in a separate cabinet on the wale of laboratory, where there are also separate manual balances for weighing of these substances

POWDERS WITH DYEING SUBSTANCES•During the preparation of powders with

dyeing substances, it is necessary to take into account that dyeing substances can make the mortar, pestle and working place dirty.

Therefore, for preparation of powders with dyeing substances it is necessary:• To have a separate working place or to work on

the assistant table covered with a sheet of paper, which should be displaced and burnt after work.

• At first, it is necessary to place substance without any color, then add dyeing substance and, at last, add the second colorless substance. If the colorless substances are prescribed in different quantities, mix them and then divide into two parts and dyeing substances should be between two layers of colorless substances.

• After work, the mortar and pestle should be washed out immediately.

POWDERS WITH POORLY POWDERED MEDICAL SUBSTANCESThere are several poorly powdered substances such as:• camphora, • menthol, • thymole, • phenylsalisilate, • iodine, • boric acid, • streptocide • etc.

Their fineness is improved in the presence of an auxiliary liquid with rendering effect.

POWDERS WITH POORLY POWDERED MEDICAL SUBSTANCES•While powdering in a dry form the

substances such as camphora, menthol, thymol, iodine cling together, adhere to the walls of the mortar and pestle. For these substances add the liquid 10 drops of alcohol or 15 drops of ether for each 1.0 g of the substance. It is necessary to add the same quantity of alcohol for phenylsalicylate, which has solid crystals.

For some medicinal substances, such as boric acid, streptocide, sodium tetraborate the amount of liquid is decreased twice: 5 drops of alcohol or 8 drops of ether for 1.0 g of the substance powdered. The remaining components of a complex powder are added without complete evaporation of the alcohol.

PREPARATION OF POWDERS WITH EXTRACTS.

•Extracts are concentrated extracting preparation from medical plant raw material produced in the pharmaceutical factories.

POWDERS WITH EXTRACTS

•Depending on their consistence they can be distinguished as:

•Dry Extracts - Extracta sicca (1:1) 100% or (1:2), i.e. 50 %;

•Dense Extracts - Extracta spicca (1:1), i.e. 100 %;

•Liquid Extracts - Extracta fluida.

THANK YOU FOR ATTENTION!