power clamps ac/dc clamps leakage clamps - cloudinary
TRANSCRIPT
CLAMP METERS
Power clamps AC/DC clamps Leakage clamps
Who?
› Technicians and maintenance operators in the industry sector
› Power Quality Professionals› Energy managers› Maintenance operator in the
photovoltaic field
Where?
› Transformer cabinets› Electric switchboars› Electric motors› Measurements near inverters › Photovoltaic installations
Why?
They carry out the main function of mobile equipment and, in this case, offer the possibility of quickly displaying quantities such as Pow-er, Cosphi, Harmonics, Inrush Currents (INRUSH) which are functions generally carried out by proper power analyzers.
Who?
› Installers and electricians of indus-trial and domestic electric systems
› Maintenance operators in the electric sector in general, and in the photovoltaic field
Where?
› Domestic and industrial electric systems
› Electric panels › Electric motors› Photovoltaic installations
Why?
Ordinary and preventive mainte-nance of distribution (also photo-voltaic) systems is mainly based on ammetric absorption; in industrial systems it is good practice to use TRMS equipment.
Who?
› Installers and maintenance oper-ators in the domestic and indus-trial sector
› Safety verification authorities of domestic and industrial electric systems
Where?
› Electric panels› Electric motors› Earthing systems
Why?
A correct mapping of all leakage currents to earth can only be car-ried out with clamps like HT77N, capable of detecting currents as small as µA, and HT78 which, due to the exceptional size of its jaws, is suitable for tests on very big loads.
103102
MAIN MEASUREMENTS AC AC/DC HARMONICS AND/OR POWER LEAKAGE
TRMS • • - - - • • • • • - • • • • • • •
Current measuring range 1000A 600A 600A 400A 600A 3000A 200A 300A 1000A 600A 400A 400A 1000A 400A 400A 10A (DC)20A (AC) 3000A 100A
AC/DC current • AC • AC • AC • AC • AC • AC • AC • AC • • • • • AC+DC • AC • AC • • AC • AC
AC/DC voltage • • • • • - • - • • • - • • • • - -
Leakage current - - - - - - - - - - - - - - - • AC/DC • •
Frequency - • - • - - - - • • • - • • • - - -
Resistance and continuity test with buzzer • • • • • - • - • • • - • • • • - -
Capacitance - • - • - - - - • • • - - - - - - -
Diode test - • • • • - • - • • • - - - - - - -
Duty Cycle (%) - • - • - - - - • • • - - - - - - -
Temperature with K-type probe - • - • - - - - • • • - - - - - - -
Phase sequence and phase concordance - - - - - - - - - - - - • • • - - -
Automatic recognition of internal functions - - - - - - • - - - - - - - - - - -
MAINS ANALYSIS
AC/DC voltage, current measurement/recording - - - - - - - - - - - - •* •* •* - - -
AC/DC power measurement/recording - - - - - - - - - - - - •* •* •* - - -
AC/DC energy measurement/recording - - - - - - - - - - - - •* •* •* - - -
Cosphi, PF measurement/recording - - - - - - - - - - - - •* •* •* - - -
U/I + THD% harmonics measurement/recording - - - - - - - - - - - - •* •* - - - -
Inrush current measurement (INRUSH) - - - - - - - - - - - • • DynamicINRUSH - - - - -
ADDITIONAL CHARACTERISTICS
Measurement category CAT IV 600VCAT III 1000V
CAT IV 600VCAT III 1000V
CAT IV 600VCAT III 1000V CAT III 600V CAT III 600V CAT IV 600V
CAT III 1000VCAT IV 600VCAT III 1000V CAT III 300V CAT IV 600V
CAT III 1000VCAT IV 600VCAT III 1000V CAT III 600V CAT III 300V CAT IV 600V
CAT III 1000V CAT III 600V CAT III 600V CAT IV 300V CAT II 600VCAT III 300V CAT III 300V
Maximum cable diameter 45mm 30mm 30mm 30mm 30mm 110mm 16mm 20mm 45mm 30mm 30mm 20mm 45mm 30mm 30mm 23mm 108mm 40mm
Measuring counts 6000 6000 2000 4000 2000 3000 10000 4000 6000 6000 4000 4000 9999 10000 10000 5000 3200 6000
Backlight • • • - • • • • • • - • • • • • - •
Bargraph • • - - - - - - • • - - - • • - - •
Autorange • • • • • • • • • • - • • • • • - •
Auto power off • • • • • • • • • • • • • • • • • •
Contactless AC voltage detection • • • • • - • • • • • • • - - - - -
Data HOLD function • • • • • • • • • • • • • • • • • •
MIN/MAX function • • • MAX - • MAX - - - • • - - • • • • - -
AVG function (AVERAGE) - - - - - - - - - - - - - • • - - -
PEAK function • • - - - - - - • • - - • • • - - •
Relative measurement (ZERO) - • - • - - - - • • • - - - - • - -
Low-pass filter for harmonic reduction - - - - - - - - - - - - - - - - • 150Hz • 100Hz
Analogue output - - - - - - - - - - - - - - - - - •
Electrical parameter logging - - - - - - - - - - - - • - - - - -
Memory for data saving - - - - - - - - - - - - • - - - - -
PC / Smartphone or Tablet interface - - - - - - - - - - - - - - - - - -
Power supply 1x 9V 6F22 1x 9V 6F22 1x 9V 6F22 2x 1.5V AAA 1x 9V 6F22 2x 1.5V AAA 2x 1.5V AAA 2x 1.5V AAA 1x 9V 6F22 1x 9V 6F22 2x 1.5V AAA 2x 1.5V AAA 2x 1.5V AAA 2x 1.5V AAA 2x 1.5V AAA 2x 1.5V AAA 2x 1.5V AAA 2x 1.5V AAA
Size in mm (L x W x H) 252x88x44 215x74x43 215x74x43 200x66x37 197x70x40 280x120x25 193x54x31 160x55x30 252x88x44 215x74x43 200x66x37 160x55x30 252x88x44 205x64x39 205x64x39 206x76x34 341x194x52 200x70x40
Weight in grams (batteries included) 402 285 285 205 180 170 280 140 442 285 205 140 420 280 280 262 1900 265
Reference standard for safety IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
Order code HP009019 HP009014 HP009012 HP004011 HP004010 HP030000 HP000100 HP007004 HP009021 HP009015 HP004013 HP007005 HP009020 HP004022 HP004020 HP000079 HP000078 HP00077N
* Real-time measurement only.
HT4011 HT4010 F3000 HT100 HT7004 HT9015 HT4013 HT7005 HT4022 HT4020 HT79 HT78 HT77NHT9021HT9019 HT9014 HT9012
CLAMP METERS
NEW NEW
NEW
HT9020
105104
CAT IV600V
CAT III 1000V PROFESSIONAL CLAMP METERS AC 1000A TRMS, CAT IV 600V
Professional clamp meter HT9019 has been designed to measure AC current up to 1000A and AC/DC voltage up to 1000V in TRMS to reach CAT IV 600V according to standard IEC/EN61010-1. The clamp is provided with a wide display with 6000 measuring spots, backlight and analogue bargraph to allow for a simple reading even in poorly lit environments. Clamp HT9019 is also provided with the auto power off function to preserve its own battery.
ORDER CODE HP009019
HT9019
• TRMS measurements• AC current up to 1000A• AC/DC voltage up to 1000V• Resistance and Continuity test• “Voltsense” for AC voltage detection• Autorange• Data HOLD• MAX/MIN• PEAK CURRENT (<10ms)• Bargraph• Backlight• AutoPowerOFF
Functions
Main features
DC voltage (Autorange) • Measuring range: 3mV ÷ 1000V• Resolution: 0.01mV ÷ 1V• Basic accuracy: ±(1.0%reading + 3digits)• Protection against overcharge: 1000VDC/ACrms AC TRMS voltage (Autorange) • Measuring range: 0.03V ÷ 1000V• Frequency band: 50Hz ÷ 400Hz• Resolution: 0.001V ÷ 1V• Basic accuracy: ±(1.0%reading + 4digits)• Protection against overcharge: 1000VDC/ACrmsAC TRMS current• Measuring range: 0.3A ÷ 1000A• Frequency band: 50Hz ÷ 400Hz• Resolution: 0.01A ÷ 1A• Basic accuracy: ±(2.8%reading +8digits)• Protection against overcharge: 1000ArmsResistance and Continuity test• Measuring range: 3Ω ÷ 60MΩ• Resolution: 0.1Ω ÷ 0.01MΩ• Basic accuracy: ±(1.0%reading + 5digits)• Continuity buzzer: <50Ω
YAAMK0000HT0 Pair of test leads
YABRS0000NN0 Soft carrying bag
Batteries and user manual
Included accessories
Technical Specifications
CAT IV600V
CAT III 1000V
DC voltage • Measuring range: 3mV ÷ 1000V• Resolution: 0.1V ÷ 1V• Basic accuracy: ±(1.0%reading + 3digits)• Protection: 1000VDC/ACAC voltage • Measuring range: 0.03V ÷ 1000V• Frequency band: 50 ÷ 400Hz• Resolution: 0.01V ÷ 1V• Basic accuracy: ±(1.0%reading + 10digits)• Protection: 600VrmsAC current • Measuring range: 0.3A ÷ 600A• Frequency band: 50 ÷ 400Hz• Resolution: 0.1A ÷ 1A• Basic accuracy: ±(2.8%reading + 8digits)• Protection: 600ArmsResistance and Continuity test • Measuring range: 3Ω ÷ 60kΩ• Resolution: 0.1Ω ÷ 0.01kΩ• Basic accuracy: ±(1.0%reading + 5digits)• Continuity test: <60ΩCapacity • Measuring range: 0.2nF ÷ 4mF• Resolution: 0.01µF ÷ 1µF• Basic accuracy: ±(2.5%reading + 5digits)Temperature with K-type probe • Measuring range: -20°C ÷ 760°C• Resolution: 0.1°C• Basic accuracy: ±(2.0%reading + 3°C)Frequency with test leads and clamp jaws • Measuring range: 0.5Hz ÷ 60kHz• Resolution: 0.01Hz ÷ 0.01kHz• Basic accuracy: ±(1.0%reading + 5digits)• Protection: 600A/600V
Functions• Measurements in TRMS, DC/AC voltage, AC current• Resistance / Continuity test, Frequency• “Voltsense” sensor• Diode test, Temperature with K-type probe• Capacity, Duty Cycle• Autorange, Data HOLD, MAX/MIN• PEAK CURRENT (<10ms)• Relative measurement, Bargraph, Backlight, AutoPowerOFF
Main features
PROFESSIONAL CLAMP METER AC 600A TRMS, CAT IV 600V
Professional clamp meter HT9014 has been designed to measure AC current up to 600A and AC/DC voltage up to 1000V TRMS to reach CAT IV 600V and CAT III 1000V in compliance with standard IEC/EN61010-1. The clamp is provided with a wide backlight display with 6000 measuring spots and an auto power off function to preserve its battery.
HT9014ORDER CODE HP009014
Included accessories
Technical Specifications
Display: LCD, 4 digits, 6000 dotsConversion type: TRMSPower supply: 1x9V batteries type IEC 6F22Auto Power OFF: after 15 minutes’ idlingClamp jaw internal diameter 45mmSafety: IEC/EN61010-1Measurement category: CAT IV 600V - CAT III 1000VInsulation: double insulationPollution level: 2Size (LxWxH): 252x88x44mmWeight (batteries included): 420g
Display: LCD, 4 digits, 6000 dots Conversion type: TRMSPower supply: 1x9V battery type IEC 622Auto Power OFF: after 30 minutes’ idlingClamp jaw internal diameter 30mmSafety: IEC/EN61010-1Measurement category: CAT IV 600V – CAT III 1000VSize (LxWxH): 210x75x45mmWeight (batteries included): 400g
YAAMK0000HT0 Pair of test leads
T10 Adapter for K-type wire probe
TK101 K-type wire probe
Battery, User manual and Soft carrying bag
CLAMP METERS
107106
CAT IV600V
CAT III 1000V
• DC/AC voltage • AC current• Resistance / Continuity test• “Voltsense” sensor• Diode test• Data HOLD• MAX function• Backlight• AutoPowerOFF
Functions
Main features
DC voltage • Measuring range: 1mV ÷ 1000V• Resolution: 0.1mV ÷ 1V• Basic accuracy: ±(1%reading + 3digits)• Protection: 1000V DC/AC AC voltage • Measuring range: 1mV ÷ 1000V• Frequency band: 50 ÷ 60Hz• Resolution: 0.1mV ÷ 1V• Basic accuracy: ±(1%reading + 4digits)• Protection: 1000V DC/ACAC current• Measuring range: 0.01A ÷ 600A• Frequency band: 50 ÷ 60Hz• Resolution: 1mA ÷ 1A• Basic accuracy: ±(2.5%reading + 4digits)• Protection: 600ArmsResistance and Continuity test• Measuring range: 1Ω ÷ 20MΩ• Resolution: 0.1Ω ÷ 0.01MΩ• Basic accuracy: ±(1.0%reading + 5digits)• Continuity buzzer: <100Ω
HT9012PROFESSIONAL CLAMP METER AC 600A, CAT IV 600V
Professional clamp meter HT9012 has been designed to measure AC current up to 600A and AC/DC voltage up to 1000V to reach CAT IV 600V and CAT III 1000V in compliance with standard IEC/EN61010-1. The clamp is provided with a wide backlight display with 6000 measuring spots and an auto power off function to preserve its battery.
ORDER CODE HP009012
YAAMK0000HT0 Pair of test leads
Battery
User manual and Soft carrying bag
Included accessories
Technical Specifications
CAT III600V
DC voltage (Autorange)• Measuring range: 400mV ÷ 600V• Resolution: 0.1mV ÷ 0.1V• Basic accuracy: ±(0.8%reading + 2digits)• Protection against overcharge: 600VDC/ACrms AC voltage (Autorange)• Measuring range: 4V ÷ 600V• Frequency band: 50Hz ÷ 400Hz• Resolution: 0,001V ÷ 1V• Basic accuracy: ±(1.8%reading + 8digits)• Protection against overcharge: 600VDC/ACrmsAC current• Measuring range: 0.2A ÷ 400A• Resolution: 0.01A ÷ 1A• Frequency range: 50Hz ÷ 60Hz• Basic accuracy: ±(2.5%reading + 8digits)• Protection against overcharge: 400ArmsResistance and Continuity test• Measuring range: 2Ω ÷ 40MΩ• Resolution: 0.1Ω ÷ 0.01MΩ• Basic accuracy: ±(1.0%reading + 5digits)• Protection against overcharge: 600VDC/ACrms• Continuity buzzer: <60ΩCapacity• Measuring range: 0.2nF ÷ 400µF• Resolution: 0.01nF ÷ 0.1µF• Basic accuracy: ±(3.0%reading + 5digits)• Protection against overcharge: 600VDC/ACrmsFrequency and Duty Cycle• Measuring range: 10Hz ÷ 10kHz• Resolution: 0.01Hz ÷ 0.01kHz• Basic accuracy: ±(1.5%reading + 2digits)• Protection against overcharge: 600VDC/ACrms• Duty Cycle: Measuring range 0.5% ÷ 99%; Temperature with K-type probe• Measuring range: -20°C ÷ 760°C• Resolution: 0.1°C ÷ 1°C• Basic accuracy: ±(3%reading + 5°C)
Functions• AC current up to 400A• AC/DC voltage up to 600V• “Voltsense” for AC voltage detection• Resistance and continuity test with buzzer• Frequency with leads, Capacity, Diode test• Duty Cycle (%)• Temperature with K-type probe• Autorange, Data HOLD, MAX/MIN/Relative measurement
Main features
CLAMP METER AC 400A
HT4011ORDER CODE HP004011
Clamp meter HT4011 has been designed to measure AC current up to 400A and AC/DC voltage up to 600V to reach CAT III 600V in compliance with standard IEC/EN61010-1. The clamp is provided with an internal sensor to detect AC voltage also without contact, through a red LED turning on. HT4011 also carries out measurements of Resistance, Continuity tests, Frequency, Capacity, Diode test, Duty Cycle and Temperature with K-type probe, among others. The clamp is also provided with the auto power off function to preserve its own battery.
Included accessories
Technical Specifications
Display: LCD, 3½ digits, 2000 dotsConversion type: average valuePower supply: 1x9V battery type IEC 622AutoPowerOFF: after 30 minutes’ idlingClamp jaw internal diameter 30mmSafety: IEC/EN61010-1Measurement category: CAT IV 600V – CAT III 1000VSize (LxWxH): 210x75x45mmWeight (batteries included): 400g
Display: LCD, 4 digits, 4000 dotsConversion type: average valuePower supply: 2x1.5V batteries type AAA LR03Auto Power OFF: after 30 minutes’ idlingMax diameter of clamp: 30mmSafety: IEC/EN61010-1Measurement category: CAT III 600VInsulation: double insulationPollution level: 2Size (LxWxH): 200x66x37mmWeight (batteries included): 205g
KIT4000A Pair of leads with 2mm tip
T10 Adapter for K-type wire probe
TK101 K-type wire probeBattery, User manual and Soft carrying bag
CLAMP METERS
109108
CAT III600V
• AC current up to 600A• AC/DC voltage up to 600V• Detection of AC voltage without contact• Resistance / Continuity test• Diode test• Data HOLD• MAX• Backlight• Auto Power OFF
Functions
Main features
DC voltage • Measuring range: 1mV ÷ 600V• Resolution: 0.1mV÷1V• Basic accuracy: ±(0.8%reading + 2 digits)• Protection against overcharge: 600Vrms AC voltage • Measuring range: 1mV ÷ 600V• Resolution: 0.1mV÷1V• Frequency band: 50Hz ÷ 60Hz• Basic accuracy: ±(1.5%reading+ 3.5mV)• Protection against overcharge: 600VrmsAC current• Measuring range: 0.01A ÷ 600A• Resolution: 1mA ÷ 0.1A• Frequency band: 50Hz ÷ 60Hz• Basic accuracy: ±(2.5%reading + 4digits)• Protection against overcharge: 600ArmsResistance and continuity test with buzzer• Measuring range: 1Ω ÷ 20MΩ• Resolution: 0.1Ω ÷ 0.01MΩ• Basic accuracy: ±(1.0%reading + 4digits)• Continuity buzzer: <150Ω
KIT4000A Pair of test leads Soft carrying bag, battery and user manual
Included accessories
HT4010CLAMP METER AC 600A
Clamp meter HT4010 can carry out measurements of AC current up to 600A and AC/DC voltage, Resistance, Continuity and Diode test. The device is provided with an internal sensor capable o detecting, through a LED turning on and a buzzer sounding, the presence of AC voltage in a spot without contact. This device complies with standard IEC/EN61010-1 in CAT III 600V and it is the ideal solution for measurements to be carried out both in domestic and in industrial environments.
ORDER CODE HP004010
Technical Specifications
CAT IV600V
CAT III 1000V
• TRMS measurements • AC TRMS current up to 3000A• Flexible jaws with big diameter• Autorange• Data HOLD• MAX/MIN• Backlight• Auto Power OFF
Functions
AC TRMS current • Measuring range: 0.1A ÷ 3000A• Resolution: 0.01 ÷ 1A• Frequency range: 45Hz ÷ 500Hz• Basic accuracy: ±(3%reading + 5digits)
Main features Included accessories
Batteries
Soft carrying bag
User Manual
F3000CLAMP METER WITH FLEXIBLE CLAMP JAWS AC 3000A
Professional clamp meter F3000 has been designed to measure AC current up to 3000A in TRMS in total autorange to reach CAT IV 600V, CAT III 1000V according to standard IEC/EN61010-1. The clamp is provided with innovative flexible jaws capable of reaching a maximum diameter of 110mm and allowing for an easy reading in any condition. The clamp is provided with a wide display with 3000 measuring spots, Data HOLD function and Backlight to allow for a simple reading even in poorly lit environments. The clamp is also provided with the auto power off function to preserve its own battery.
ORDER CODE HP030000
Technical Specifications
Display: LCD, 3½ digits, 2000 dotsConversion type: average valuePower supply: 1x9V battery type 6F22Auto Power OFF: after 15 minutes’ idlingClamp jaw internal diameter: 30mmSafety: EC/EN 61010-1Measurement category: CAT III 600VInsulation: double insulationPollution level: 2Max height: 2000mSize (LxWxH): 197x70x40mmWeight (batteries included): 180g
Display: LCD, 4 digits, 3000 dots Conversion type: TRMSPower supply: 2x1.5V alkaline batteries type AAA LR03Auto Power OFF: after 20 minutes’ idlingMax diameter of clamp: 110mmSafety: IEC/EN61010-1Measurement category: CAT IV 600V - CAT III 1000VInsulation: double insulationPollution level: 2Size (LxWxH): 280x120x25mmWeight (batteries included): 170g
CLAMP METERS
111110
CAT IV600V
CAT III 1000V
DC voltage (Autorange)• Measuring range: 2.2V ÷ 1000V• Resolution: 0.1V• Basic accuracy: ±(0.3%reading + 2digits)• Protection against overcharge: 1000VDC/ACrms AC TRMS voltage (Autorange)• Measuring range: 1.3V ÷ 1000V• Frequency band: 50Hz ÷ 500Hz• Resolution: 0.1V• Basic accuracy: ±(0.9%reading + 3digits)• Protection against overcharge: 1000VDC/ACrmsAC TRMS current (Autorange)• Measuring range: 1.5A ÷ 200A• Resolution: 0.1A• Frequency range: 50Hz ÷ 60Hz• Basic accuracy: ±(3%reading + 5digits)• Protection against overcharge: 200ArmsResistance and Continuity test• Measuring range: 0Ω ÷ 9999Ω• Resolution: 1Ω• Basic accuracy: ±(0.9%reading + 2digits)• Protection against overcharge: 1000VDC/ACrms• Continuity buzzer: <25ΩDiode test• Measuring range: 0.4V ÷ 0.8V• Resolution: 0.1V• Basic accuracy: ±(1%reading + 3digits)• Protection against overcharge: 1000VDC/ACrms
Functions
• TRMS measurements• AC TRMS current up to 200A• DC/AC TRMS voltage up to 1000V• “Voltsense” for AC voltage detection• Resistance• Continuity test with buzzer• Diode test• Autorange• Autorecognition function• Data HOLD• Backlight• Auto Power OFF
Main features
FORK CLAMP METER AC 200A TRMS
HT100ORDER CODE HP000100
Professional clamp meter HT100 is provided with automatic recognition of functions. The measurement of AC current up to 200A and AC/DC voltage up to 1000V in TRMS reacheas CAT IV 600V and CAT III 1000V in compliance with standard IEC/EN61010-1. The clamp is provided with “open” jaws, with a wide display with 9999 measuring spots, “Voltsense” phase detector function, Data HOLD and backlight to allow for a simple reading even in poorly lit environments. HT100 also carries out measurements of Resistance, Continuity test and Diode test. The clamp is also provided with the auto power off function to preserve its own battery.
4413-2 Pair of test leads
Batteries and user manual
Included accessories
Technical Specifications
HT7004HT7005
ORDER CODE HP007004 | HP007005
Functions Main features
Power supply: 2x1.5V batteries type AAA LR03Safety: IEC/EN61010-1Measurement category: CAT III 300VInsulation: double insulationPollution level: 2Max operating altitude: 2000mDisplay: 3¾ LCD, 4000 dots,
decimal sign and pointMax cable diameter: 20mmSize (LxWxH): 155x60x25mm Weight (batteries included): 140g
Soft carrying bag
Batteries
User Manual
Included accessories
INRUSH
Display: LCD, 4 digits, 10000 dots, backlightConversion type: TRMSPower supply: 2x1.5V alkaline batteries type AAA LR03Auto Power OFF: after 20 minutes’ idlingMax diameter of clamp: 16mmSafety: IEC/EN61010-1Measurement category: CAT IV 600V, CAT III 600VInsulation: double insulationPollution level: 2Size (LxWxH): 193x54x31mmWeight (batteries included): 280g
POCKET CLAMP METERSFOR TRMS AC CURRENT UP TO 400A WITH MEASUREMENT OF INRUSH CURRENT
Clamp meter HT7005 can measure DC and AC TRMS current up to 400A in Autorange, in compliance with standard IEC/EN61010-1, CAT III 300V, further to measuring the inrush current of electric motors with a response time of 100ms. Model HT 7004 can measure only AC TRMS current up to 300A. Both devices are provided with Data HOLD function and Auto Power Off function, in order to preserve the internal battery when not in use. Thanks to its extremely small size, these models are very practical and they are the ideal solution for simple measurements in the most common domestic and industrial environments.
HT7004 HT7005AC TRMS current 300A • 400A •
DC current - 400A •
Inrush current (INRUSH) - •
AC voltage detection without contact • •
Autorange • •
Data HOLD • •
ZERO function (zeroing) - •
Backlight • •
Auto Power OFF • •
CLAMP METERS
113112
CAT IV600V
CAT III 1000V
DC voltage (Autorange) • Measuring range: 3mV ÷ 1000V • Basic accuracy: ±(1.0%reading + 3digits)AC TRMS voltage (Autorange) • Measuring range: 0.03V ÷ 1000V• Frequency range: 50Hz ÷ 400Hz• Basic accuracy: ±(1.0%reading + 4digits)DC current • Measuring range: 0.3A ÷ 1000A• Basic accuracy: ±(2.0%reading + 8digits)AC TRMS current • Measuring range: 0.3A ÷ 1000A• Frequency range: 50Hz ÷ 400Hz• Basic accuracy: ±(2.8%reading + 8digits)Resistance and Continuity test • Measuring range: 3Ω ÷ 60MΩ• Basic accuracy: ±(1.0%reading + 5 digits)• Buzzer: <50ΩFrequency with clamp jaws and leads • Measuring range: 0.5Hz÷ 60kHz• Basic accuracy: ±(1.0%reading + 5digits)Capacity • Measuring range: 0.2nF ÷ 4mF• Basic accuracy: ±(2.5%reading + 5digits)Temperature with K-type probe • Measuring range: -20°C ÷ 760°C;• Basic accuracy: ±(2.0%reading + 3°C)
Functions
Main features
• TRMS measurements • AC/DC voltage up to 1000V• AC/DC current up to 1000A• Resistance and Continuity test• “Voltsense” for AC voltage recognition• Frequency with clamp jaws and leads• Capacity, Duty cycle, Diode test• Temperature with K-type probe• Autorange, Data HOLD• MAX/MIN, PEAK (<10ms)• Relative measurements• Backlight, Bargraph• Auto Power OFF
AC/DC TRMS CAT IV 600V CLAMP METER WITH TEMPERATURE MEASUREMENT
HT9021 has been designed to measure AC/DC current up to 1000A in TRMS reaching CAT IV 600V and CAT III 1000V in compliance with safety standard IEC/EN61010-1. The clamp is provided with a display with 6000 measuring spots with backlight and bargraph to allow for a simple reading even in poorly lit environments. HT9021 also carries out measurements of voltage up to 1000V, Resistance, Frequency, Capacity and Temperature with K-type probe.
HT9021ORDER CODE HP009021
YAAMK0000HT0 Pair of test leadsT10 Adapter for K-type wire probeTK101 K-type wire probeYABRS0000NN0 Soft carrying bag
Batteries and user manual
Included accessories
Technical Specifications
CAT IV600V
CAT III 1000V AC/DC TRMS 600A CAT IV CLAMP METER WITH TEMPERATURE MEASUREMENT
HT9015 has been designed to measure AC/DC current up to 600A and AC/DC voltage up to 1000V in TRMS reaching CAT IV 600V and CAT III 1000V in compliance with safety standard IEC/EN61010-1. The clamp is provided with a display with 6000 measuring spots with backlight and bargraph to allow for a simple reading even in poorly lit environments. HT9015 also measures Resistance, Frequency, Capacity and Temperature with K-type probe.
HT9015ORDER CODE HP009015
DC voltage (Autorange) • Measuring range: 3mV ÷ 1000V • Basic accuracy: ±(1.0%reading + 3digits)AC TRMS voltage (Autorange) • Measuring range: 0.03V ÷ 1000V• Frequency range: 50Hz ÷ 400Hz• Basic accuracy: ±(1.0%reading + 4digits)DC current • Measuring range: 0.3A ÷ 600A• Basic accuracy: ±(2.0%reading + 8digits)AC TRMS current • Measuring range: 0.3A ÷ 600A • Frequency range: 50Hz ÷ 400Hz• Basic accuracy: ±(2.8%reading + 8digits)Resistance and Continuity test • Measuring range: 3Ω ÷ 60MΩ• Basic accuracy: ±(1.0%reading + 5 digits)• Buzzer: <50ΩFrequency with clamp jaws and leads • Measuring range: 0.5Hz÷ 60kHz• Basic accuracy: ±(1.0%reading + 5digits)Capacity • Measuring range: 0.2nF ÷ 4mF• Basic accuracy: ±(2.5%reading + 5digits)Temperature with K-type probe • Measuring range: -20°C ÷ 760°C; -4°F ÷ 1400°F• Basic accuracy: ±(2.0%reading + 6°F)
Functions
Main features
• TRMS measurements • AC/DC voltage up to 1000V• AC/DC current up to 600A• Resistance and Continuity test• “Voltsense” for AC voltage recognition• Frequency with clamp jaws and leads• Capacity• Duty cycle• Diode test• Temperature with K-type probe• Autorange• Data HOLD• MAX/MIN• PEAK (<10ms)• Relative measurements• Backlight and Bargraph• Auto Power OFF
YAAMK0000HT0 Pair of test leadsT10 Adapter for K-type wire probeTK101 K-type wire probe
Battery, User manual and Soft carrying bag
Included accessories
Technical Specifications
Display: LCD, 4 digits, 6000 dots Conversion type: TRMSPower supply: 1x9V battery type IEC6F22Auto Power OFF: after 15 minutes’ idlingMax diameter of clamp: 45mmSafety: IEC/EN61010-1Measurement category: CAT IV 600V – CAT III 1000VInsulation: double insulationPollution level: 2Size (LxWxH): 252x88x42mmWeight (batteries included): 420g
Display: LCD, 4 digits, 6000 dots Conversion type: TRMSPower supply: 1x9V battery type IEC6F22Auto Power OFF: after 15 minutes’ idlingMax diameter of clamp: 30mmSafety: IEC/EN61010-1Measurement category: CAT IV 600V - CAT III 1000VInsulation: double insulationPollution level: 2Size (LxWxH): 210x75x45mmWeight (batteries included): 400g
CLAMP METERS
115114
CAT III600V
CLAMP METER AC/DC 400A
HT4013ORDER CODE HP004013
Clamp meter HT4013 has been designed to measure AC/DC current up to 400A and AC/DC voltage up to 600V to reach CAT III 600V in compliance with standard IEC/EN61010-1. The clamp is provided with an internal sensor to detect AC voltage also without contact, through a red LED turning on. This model also carries out measurements of Resistance, Continuity tests, Frequency, Capacity, Diode test, Duty Cycle and Temperature with K-type probe, among others. The clamp is also provided with the auto power off function to preserve its own battery.
DC voltage (Autorange)• Measuring range: 2mV ÷ 600V• Resolution: 0.1mV ÷ 1V• Basic accuracy: ±(0.8%reading + 2digits)• Protection against overcharge: 600VDC/ACrms AC voltage (Autorange)• Measuring range: 0.02V ÷ 600V• Frequency band: 50Hz ÷ 400Hz• Resolution: 0,001V ÷ 1V• Basic accuracy: ±(1.5%reading + 5digits)• Protection against overcharge: 600VDC/ACrmsAC/DC current• Measuring range: 0.2A ÷ 400A• Resolution: 0.01A ÷ 1A• Frequency range: 50Hz ÷ 60Hz• Basic accuracy: ±(2.5%reading + 5digits)• Protection against overcharge: 400ArmsResistance and Continuity test• Measuring range: 2Ω ÷ 40MΩ• Resolution: 0.1Ω ÷ 0.01MΩ• Basic accuracy: ±(1.0%reading + 4digits)• Protection against overcharge: 600VDC/ACrms• Continuity buzzer: <30ΩCapacity• Measuring range: 0.2nF ÷ 100µF• Resolution: 0.01nF ÷ 0.1µF• Basic accuracy: ±(3.0%reading + 5digits)• Protection against overcharge: 600VDC/ACrmsFrequency and Duty Cycle• Measuring range: 10Hz ÷ 10kHz• Resolution: 0.01Hz ÷ 0.01kHz• Basic accuracy: ±(1.5%reading + 2digits)• Protection against overcharge: 600VDC/ACrms• Duty Cycle: Measuring range 0.5% ÷ 99%; Temperature with K-type probe• Measuring range: -20°C ÷ 760°C• Resolution: 0.1°C ÷ 1°C• Basic accuracy: ±(3%reading + 5°C)
Functions• AC/DC current up to 400A• AC/DC voltage up to 600V• “Voltsense” for AC voltage detection• Resistance and continuity test with buzzer• Frequency with leads, Capacity, Diode test• Duty Cycle (%)• Temperature with K-type probe• Autorange, Data HOLD, MAX/MIN/Relative measurement
Main features
Included accessoriesKIT4000A Pair of leads with 2mm tipT10 Adapter for K-type wire probeTK101 K-type wire probe
Battery, User manual and Soft carrying bag
Technical Specifications
CAT IV600V
CAT III 1000V
DYNAMICINRUSH
Functions
HT9020ORDER CODE HP009020
Main features
Included accessories
Display: LCD, 4 digits, 4000 dotsConversion type: RMSPower supply: 2x1.5V alkaline batteries type AAA LR03Auto Power OFF: after 30 minutes’ idlingMax diameter of clamp: 30mmSafety: IEC/EN61010-1Measurement category: CAT III 600VInsulation: double insulationPollution level: 2Size (LxWxH): 200x66x37mmWeight (batteries included): 205g
PROFESSIONAL CLAMP METERS WITHPOWER/HARMONIC AND INRUSH MEASUREMENT
HT9020 have been designed for measuring DC, AC+DC TRMS current up to 1000A to obtain CAT IV 600V in compliance with standard IEC/EN61010-1. It also measures Active, Reactive and Apparent Power, Energy, voltage/current harmonic analysis up to the 25th with THD% calculation in single-phase or balanced three-phase systems. It allows testing phase sequence and concordance with the 1-terminal measuring method. It is also possible to detect the events linked to motor starting (INRUSH) currents. HT9020 is provided with a wide graphic dot-matrix screen (128x128pxl) with backlight, in order to allow reading data even in poorly lit environments. Auto power off function preserves internal battery.
• DC, AC + DC TRMS current up to 1000A
• DC, AC + DC TRMS voltage up to 1000V
• Frequency with test leads and clamp jaws
• Phase sequence / phase concordance
• Resistance and Continuity test
• Measurement of DC power and energy
• Active, reactive, apparent power measurement on single-phase systems
• Power factor measurement on single-phase systems
• Voltage/current harmonic measurement up to the 25th and THD%
• Motor starting (INRUSH) current detection
• Autorange
• Backlight
• Auto Power OFF
• Data HOLD, MAX/MIN/CREST
YAAMK0000HT0 Pair of test leads
YAAMK0001HT0 Pair of alligator clips
YABRS0000NN0 Soft carrying bag
Batteries
User manual on CD-ROM
ISO9000 calibration certificate
Quick user guide
Display: dot-matrix 128x128pxl with backlightPower supply: 2x1.5V batteries type AAADuration: > 50 hoursSafety: IEC/EN61010-1Insulation: Double insulationPollution level: 2Measurement category: CAT IV 600V to earth,
max 1000V between inputsMax diameter of cable: 45mmSize (LxWxH): 252x88x44mmWeight (batteries included): 0.42kg
CLAMP METERS
117116
CAT III600V
Functions
AC TRMS 400A CLAMP METERS WITH POWER/HARMONICS MEASUREMENT
Professional clamp meters HT4020 and HT4022 carry out measurements in TRMS of AC current up to 400A, AC/DC voltage up to 600V, Frequency, Resistance, Continuity test, Active, Reactive, Apparent Power, Cos , Energy for balanced single-phase and/or three-phase systems, further to the detection of phase sequence by 1-terminal method. Model HT4022 also carries out the absolute/percentage measurement of voltage and current harmonic components with calculation of THD%. Each device complies with IEC/EN61010-1 in CAT III 600V and is the ideal solution or troubleshooting typical problems in industrial environments such as non-linear loads, frequency-controlled motors.
HT4022HT4020
ORDER CODE HP004022 | HP004020
HT4022 HT4020DC/AC TRMS voltage • •
AC TRMS current • •
Resistance and Continuity test • •
Frequency with test leads and clamp jaws • •
Active, Reactive, Apparent power • •
Active, Reactive, Apparent energy • •
Power factor and Cos • •
V/ I harmonics up to the 25th and THD% • -
Phase sequence with 1 terminal • •
Autorange • •
Data HOLD • •
MAX/MIN/AVG/PEAK • •
Backlight • •
AutoPowerOFF • •
Display: LCD, 4 digits, 10000 dots Conversion type: TRMS, 64 samples in 20msPower supply: 2x1.5V batteries type AAA LR03Auto Power OFF: after 5 minutes’ idlingSafety: IEC/EN 61010-1Measurement category: CAT III 600VPollution level: 2Insulation: double insulationMax height: 2000mClamp jaw internal diameter 30mmSize (LxWxH): 205x64x39mmWeight (batteries included): approx 280g
4413-2 Pair of test leadsYAAMK0001HT0 Pair of alligator clipsB80 Soft carrying bag
Rubber cap for test lead ISO9000 calibration certificateBatteries and user manual
Included accessories
Main features
HT4022 HT4020DC voltage
Measuring range: 0.1V ÷ 600V 0.1V ÷ 600V
Resolution: 0.1V 0.1V
Basic accuracy: ±(1.0%read. + 3digits) ±(1.0%read. + 3digits)
Protection: 600Vrms 600Vrms
AC TRMS voltage
Measuring range: 1.6V ÷ 600V 1.6V ÷ 600V
Resolution: 0.1V 0.1V
Basic accuracy: ±(1.0%read. + 3digits) ±(1.0%read. + 3digits)
Protection: 600Vrms 600Vrms
AC TRMS current
Measuring range: 0.1A ÷ 400A 0.1A ÷ 400A
Resolution: 0.1A 0.1A
Basic accuracy: ±(1.0%read. + 3digits) ±(1.0%read. + 3digits)
Protection: 600Arms 600Arms
Active, Reactive, Apparent AC power [kW, kVAR, kVA]
Measuring range: 0.01 ÷ 1000 0.01 ÷ 1000
Resolution: 0.01 ÷ 0.1 0.01 ÷ 0.1
Basic accuracy: ±(3.5%read. + 3digits) ±(3.5%read. + 3digits)
Protection: 600V/600Arms 600V/600Arms
HT4022 HT4020Power factor and Cos
Measuring range: 0.20 ÷ 1.00 0.20 ÷ 1.00
Resolution: 0.01 0.01
Basic accuracy: ±3° ±3°
voltage and current harmonics
Harmonic order: 1 ÷ 25 -
Resolution [V, A]: 0.1 -
Basic accuracy: ±(10%read. + 5digits) -
Resistance and Continuity test
Measuring range: 0.1Ω ÷ 2kΩ 0.1Ω ÷ 2kΩ
Resolution: 0.1Ω ÷ 3Ω 0.1Ω ÷ 3Ω
Basic accuracy: ±(1.0%read. + 5digits) ±(1.0%read. + 5digits)
Continuity test <40Ω <40Ω
Protection: 600Vrms 600Vrms
Frequency with test leads and clamp jaws
Measuring range: 40Hz ÷ 400Hz 40Hz ÷ 400Hz
Resolution: 0.1Hz 0.1Hz
Basic accuracy: ±(0.5%read.+ 1digit) ±(0.5%read.+ 1digit)
Protection: 600Vrms/600Arms 600Vrms/600Arms
Phase sequence with 1 terminal
Measuring range: 50V ÷ 600V 50V ÷ 600V
Frequency range: 40Hz ÷ 69Hz 40Hz ÷ 69Hz
Protection: 600Vrms 600Vrms
Technical Specifications
CLAMP METERS
119118
CAT III300V
CAT II 600V(ONLY HT78)
Functions
HT77N HT78 HT79AC TRMS currentMeasuring range: 0.01mA ÷ 100A 0.1mA ÷ 3000A 0.1mA ÷ 20AResolution: 0.001mA ÷ 0.1A 0.1mA ÷ 1A 0.1mA ÷ 0.01ABasic accuracy: ±(1.0read + 8digit) ±(1.5read + 8digit) ±(1.0read + 5digit)Protection: max 120Arms 3000Arms max 20ArmsDC currentMeasuring range: - - 0.1mA ÷ 20AResolution: - - 0.1mA ÷ 0.01ABasic accuracy: - - ±(1.0read + 10digit)Protection: - - max 10ADC
Display: LCD 4 digits, 6000 dots (HT77N)LCD 4 digits, 3200 dots (HT78)LCD 4 digits, 5000 dots (HT79)
Conversion type: TRMSPower supply: 2x1.5V batteries type AAA LR03
Safety: IEC/EN 61010-1Measurement category:
CAT III 300V (HT77N)CAT II 600V, CAT III 300V (HT78)CAT IV 300V (HT79)
Insulation: double insulationPollution level: 2Max height: 2000mClamp jaw internal diameter
40mm (HT77N), 108mm (HT78)23mm (HT79)
Auto Power OFF: after 20 minutes’ idling (HT77N)after 10 minutes’ idling (HT78)
Size (LxWxH): 202x75x42mm (HT77N)341x194x52mm (HT78)206x76x34mm (HT79)
Weight (batteries included):
265g (HT77N), 1.9kg (HT78), 262g (HT79)
Main features
Included accessoriesPair of test leads (HT79)Soft carrying bag
Batteries
Non-slip strap (HT78)User Manual
HT79|HT78HT77N
ORDER CODE HP000079 | HP000078 | HP00077N
Technical Specifications
HT77N HT78 HT79TRMS measurements • • •AC/DC voltage - - • (300V)DC Current - - • (10A)AC Current • (100A) • (3000A) • (20A)Resistance and Continuity test - - •Low-pass filter • (150Hz) • (100Hz) -Analogue DC output - • -Data HOLD • • •Auto HOLD • • -Peak HOLD • • -Relative measurements (ZERO) - - •Autorange • - •Backlight • - •Bargraph • - -Auto Power OFF • • •
CLAMP METERS FOR MEASURING LEAKAGE CURRENT
Models HT77N, HT78 and HT79 are clamp meters designed for an accurate measurement of very low values of AC and DC currents (only HT79) and, therefore, they are mainly employed in detecting and defining leakage currents in domestic and industrial electric systems, which typically cause the RCDs’ tripping. Devices HT77N and HT78 are provided with an in-built low-pass filter to eliminate harmonic components. HT78 is provided with an analogue output for the connection to possible external data loggers and, thanks to its big jaws (108mm), it is possible to measure leakage currents even in installations with cables having a big cross-section. Model HT79 also allows measuring AC/DC voltage and resistance/continuity test.
CLAMP METERS
121120