4-STEP

CUSTOM PERFORMANCE OPTIMIZATION MANUAL

Rhino Custom Pro Model

Before you start pedalling… KINEXTM custom performance cycling shoes have a unique and patented method of stabilizing the foot to offer superior power transfer. For many athletes, your feet and body will need to adapt to this new fit environment in order to get the maximum benefit. It is important that you take a few minutes to familiarize yourself with your new shoes and follow the step-by-step information in this pamphlet.

1- Verify Your Custom Fit

Your new custom performance cycling shoes were handcrafted to your unique foot shape prescription. They should fit snugly and comfortably right away with solid connection to the KINEXTM “Power Triangle”, the 3 main contact points on each foot.

Power Triangle

Initial Fitting: Using the micro-adjustable cable closure system, adjust the KOMPRESSOR power interface so that you feel balanced pressure spread across the 3 main locations of the Power Triangle. NOTES: Ideal tension is less than you think. If after several hours of use you are feeling some pressure points, consult the “Thermoforming” section.

2- Install Cleats

KINEXTM custom performance cycling shoes feature a universal 3-hole cleat interface. Consult your pedal/cleat owner's manual for proper installation.

3- Power & Comfort Adaptation

The KINEXTM Power Triangle references parts of the foot that are more passive in conventional shoes. To help you adapt to this new 3D power sensation, your custom performance shoes come with two densities of insoles - medium and firm. We recommend using the medium density for the first 8-10 hours of use. This will enable the anatomy of your feet to adapt to the sensations associated with KINEXTM power transfer. After this break-in period you can continue to use both sets of insoles as needed based on the following recommendations gathered from elite cyclists: FIRM Sprinting, Criterium, Time Trial, Short Triathlons, BMX, Mountain, Climbing MEDIUM Long distance Road & Triathlon rides Touring & Recovery rides Warning: Only use the insoles provided with your shoes. The KINEXTM Power Triangle uniquely stabilizes the arches of the foot in a quasi-permanent state of compression. Using conventional footbeds and/or custom orthotics can interfere with this benefit and my cause harm. If you have any questions or concerns consult our Customer Care expert.

KINEXTM shoes are designed and manufactured in Canada in proud partnership with:

KINEXTM (Equipower Sports Ltd.) #301-977 West 8th Vancouver, BC V5Z 1E4 1-514-409-5388 kinexsystem.com

4- Pro Tips for First Use

By improving power transfer in all phases of the pedal stroke, KINEXTM custom performance cycling shoes can provide benefits to cyclists of all ability levels including: • Peak force transfer and peak watts • Time to peak force and acceleration • Average watts • Muscle fatigue and lactic build up for the same

amount of effort/VO2 Here are some "pro tips" for the first time that you use them:

1. Do not over tighten; it’s less than you think! 2. Ideal tension is balanced pressure between the

top of your foot & heel. Play with this until you find your ideal sweet spot.

3. Do not use conventional footbeds or custom orthotics. These will interfere with KINEXTM fit benefits.

4. One-foot drills will emphasize the 3D aspect of KINEXTM fit. With one foot in KINEXTM and the other in conventional shoes try: o Going up a gentle incline o Alternating the 2 insoles in various

conditions to find your preference of power vs. comfort.

To to fully appreciate these benefits we recommend consulting a trained PowerWatts professional.

Thermoforming The materials on the lateral facing (outside) of KINEXTM custom shoes are comprised of Surlyn®.

This material will set to the shape of your foot over the first few uses to provide another level of reliable comfort and stability. If you feel pressure points on the outside of your foot after several hours of use, you can thermoform this area using a high powered blow dryer or low power heat gun as follows: With one hand inside the shoe touching the target surface, heat the area around the “KINEX” word mark for 20 seconds from a distance of at least 8 inches. When the inside surface begins to feel warm, place your foot in the shoe & secure the KOMPRESSOR closure system with light tension. Allow the shoe to cool before removing and repeat for other foot if needed. Very high temperatures will void your warranty and may damage your shoe. Do not place your feet in the very hot shoes or you may burn your feet.

Customer Care We really want to learn from your experiences with KINEXTM cycling shoes. Our full-time fit specialist is available to answer any questions you may have to ensure optimal performance. For all inquiries: info@kinexsystem.com

Limited Warranty and Liability KINEX™ custom performance cycling shoes carry a limited warranty for one (1) year from date of purchase. This limited warranty extends only to the original consumer who purchased the new KINEX™ cycling shoes. This limited warranty does not extend to damage resulting from accident, misuse, neglect or abuse; normal wear and tear; any plastic surfaces or externally exposed parts that are scratched or damaged due to normal use, breakage (except breakage resulting from manufacturing defects); improper dealer service; improper modifications to product; loss of product due to improper attachment. Neither Equipower Sports Ltd. nor the distributor nor the dealer is liable for any incidental or consequential damages resulting from the use or possession of the KINEX™ cycling shoes. Neither Equipower Sports Ltd. nor any authorized KINEX™ dealer or distributor shall in any way be liable for any damages, direct or indirect, economic, special, commercial, incidental, exemplary or consequential damages (including without limitation lost profits, loss of business revenue or earnings, damages, personal injury and wrongful death damages) arising from or in connection with the use or performance of KINEX™ cycling shoes. The purchaser acknowledges this limitation of liability and waives any rights he may have against Equipower Sports Ltd. or against any authorized KINEX™ dealer or distributor. This limitation applies without regard to whether such damages are claimed, asserted or brought in an action or claim based in tort (including negligence) or contract, or under warranty, or under any other law or form of action.

KOMPRESSOR power transfer interface

Micro-adjustable cable closure system

Navicular (top of foot)

Calcaneus (Heel)

Metatarsals (base of toes)

360°Power ondemand