power n te spotlt - usag
TRANSCRIPT
POWERIN THE
SPOTLIGHT
2018AUTUMNACTION
NEW PRODUCTS
2,2
CHARACTERISTICS
Square drive 1/2”
Bolt capacity M20
Max torque 1.898 Nm
Torque in use 320÷460 Nm
Strokes per minute 1200
Free speed 6.500 giri/min
Average air consumption 172 l/min
Recommended air pressure 6,2 bar
Sound level 94 ±3 dB(A)
Sound power 105 ±3 dB(A)
Vibrations 6,2 m/s2
Air inlet 1/4”
Ø hose size 10 mm
Weight 2,2 kg
943 PC1 1/2”Code U09430001
Magnesium impact wrench - the top• Magnesium alloy casing• Aluminum motor housing• Removable LED unit rechargeable with USB cable (3.7V 180 mAh Li-Ion battery)• Reversible model with double hammer mechanism• 3 tightening torque settings, always maximum untightening power• Progressive trigger• Rubber side bumpers• Balanced weight for maximum comfort• Soft-touch bi-material handle• Muffler and air exhaust integrated in the handle• Spare rotor blades (6 pieces): code N573343
1.898
INVERSION AND ADJUSTMENT
BY ALUMINIUM LEVER
LED LIGHTINGREMOVABLE
AND RECHARGEABLE
DOUBLE HAMMERMECHANISM:
LESS VIBRATIONSMAGNESIUM ALLOY CASINGLIGHTWEIGHT AND POWERFUL
THE TOP
162 mm 75 mm21
2 m
m
Li-Ion 3.7V180 mAh
2
Airtools
2
CHARACTERISTICS
Square drive 1/2”
Bolt capacity M16
Max torque 1.600 Nm
Torque in use 280÷440 Nm
Strokes per minute 1.300
Free speed 7.000 giri/min
Average air consumption 172 l/min
Recommended air pressure 6,2 bar
Sound level 93 ±3 dB(A)
Sound power 104 ±3 dB(A)
Vibrations 6,2 m/s2
Air inlet 1/4”
Ø hose size 10 mm
Weight 2,0 kg
929 PC1 1/2”Code U09290001
Magnesium impact wrench• Magnesium alloy casing• Aluminum motor housing• Reversible model with double hammer mechanism• 3 tightening torque settings, always maximum untightening power• Progressive trigger• Rubber side bumpers• Balanced weight for maximum comfort• Soft-touch bi-material handle• Muffler and air exhaust integrated in the handle• Spare rotor blades (6 piceces): code N573341
1.600
INVERSION AND ADJUSTMENT
BY ALUMINIUM LEVER
DOUBLE HAMMERMECHANISM:
LESS VIBRATIONS
MAGNESIUMALLOY CASINGLIGHTWEIGHT AND POWERFUL
THE REFERENCE MODEL
162 mm 75 mm21
2 m
m
3
Airtools
THE ALUMINIUM IMPACT WRENCH
2,8
CHARACTERISTICS
Square drive 1/2”
Bolt capacity M16
Max torque 1.490 Nm
Torque in use 135÷380 Nm
Strokes per minute 1.120
Free speed 6.500 giri/min
Average air consumption 147 l/min
Recommended air pressure 6,2 bar
Sound level 90 ±3 dB(A)
Sound power 101 ±3 dB(A)
Vibrations 5,2 m/s2
Air inlet 1/4”
Ø hose size 10 mm
Weight 2,8 kg
928 AC1 1/2”Code U09280014
Aluminium impact wrench• Steel front casing• Aluminum motor housing• Reversible model with double hammer mechanism• 7 torque settings, in both directions of rotation• Progressive trigger• Soft-touch bi-material handle• Muffler and air exhaust integrated in the handle• Spare rotor blades (6 pieces): code N459388
1.490
INVERSION AND ADJUSTMENT BY RING
DOUBLE HAMMERMECHANISM:
LESS VIBRATIONS
ALUMINIUM BODY
190 mm 70 mm
193
mm
4
Air tools
DESCRIPION ITEMS/SIZE PCS
hexagonal sockets 1/2”235 1/2 PN 3/8-7/16-1/2-9/16-5/8-3/4-13/16-7/8-11/16-19/32-21/32
11
hexagonal sockets 1/4”235 1/4 EPN 1/8-5/32-3/16-7/32-1/4-9/32-5/16-11/32-3/8-7/16-1/2-9/16
12
extensions 1/2” 125-250 mm 2extensions 1/4” 50-100 mm 2reversible ratchet 1/2” 1reversible ratchet 1/4” 1spinner with handle 1/4” 1universal joint 1/2” 1universal joint 1/4” 1T-handle with sliding square drive 1/4” 1
Adjustable wrench 294 A 250 1
combination wrenches1/4-5/16-3/8-7/16-1/2-9/16-5/8-11/16-3/4-13/16-7/8-15/16
12
screwdrivers for slot-head screws0,4x2,5-0,5x3-0,8x4-1x5,5-1,2x6,5-1,6x8
6
screwdrivers for PHILLIPS® screws PH 1-2 2screwdrivers for POZIDRIV® screws PZ 1-2 2angled hexagon keys 3/32-1/8-5/32-3/16-7/32-1/4-5/16-3/8 8combination pliers 180 mm 1adjustable pliers 240 mm 1half-round pliers 160 mm 1diagonal cutting nippers 160 mm 1
DESCRIPION ITEMS/SIZE PCS
Phase-testing screwdriver 1scissors for electricians 1utility knife 1mini hacksaw frame 1Tape rule 981 A 3 1hammer for mechanics 300 gr 1bits for slot-head screws 3-4-4,5-5-5,5-6-6,5-7-8 9bits for PHILLIPS® screws PH 00-0-1(x2)-2(x2)-3-4 8bits for POZIDRIV® screws PZ 1-2(x2)-3-4 5bits for Allen screws 1,5-2-2,5-3-4-5-5,5-6-7-8 mm 10
bits for Allen screws1/16-5/64-3/32-7/64-1/8-9/64-5/32-3/16-7/32-1/4
10
TORX® bitsT8-T9-T10-T15-T20-T25-T27-T30-T40-T45
10
TORX® Tamper Resistant bits T8-T10-T15-T20-T25-T27-T30-T35-T45 9Tri-Wing bits 1-2-3-4 4Spanner bits 4-6-8-10-12 5Torq bits 6/8/10 3square bits 0-1-2(x2)-3 5Clutch bits 1/8-5/32-3/16-1/4-5/16 5bits XZN M5-M6-M8 3hexagonal bits for Allen screws with hole 2-2,5-3-4-5-6 6hexagonal bits for Allen screws with hole 5/64-3/32-7/64-1/8-9/64-5/32 6magnetic extensions 1/4" 2
174PIECES
11 kg mm
L. H. D.
460158385
Case with assortment in inches for maintenance• Case with aluminium section shell and metal reinforcements• Double metal closing hinge with lock (key included)• Handle with plastic protection• Three inside panels equipped with elastics to hold tools• Blocking system of the folding panel
002 JMPCode U00020004
606 1/4 APOL
692 J100
606 1/2 APOL
14
5
CAse with Assorment for mAintenAnCe
NEW DRAWER CHESTS
ALUMINIUM DRAWER HANDLES
UPPER COMPARTMENT FOR TOOLS
SLIDES RETURN CLOSING SYSTEM
CENTRALIZED LOCKING
SIDE TRANSPORT HANDLES
6
DrAwer Chests
8DRAWERS
6DRAWERS
4DRAWERS
3DRAWERS
531 DCode U05310004
531 CCode U05310003
531 BCode U05310002
531 ACode U05310001
Drawer chest (empty)• Inside dimensions:
−upper compartment 690x320x60 mm −2 drawers 570x270x40 mm −1 drawer 570x270x60 mm −4 drawers 165x270x40 mm −1 drawer 165x270x90 mm
Drawer chest (empty)• Inside dimensions:
−upper compartment 690x320x60 mm −2 drawers 570x270x40 mm −1 drawer 570x270x60 mm −3 drawers 165x270x40 mm
Drawer chest (empty)• Inside dimensions:
−upper compartment 690x320x60 mm −3 drawers 570x270x40 mm −1 drawer 570x270x110 mm
Drawer chest (empty)• Inside dimensions:
−2 drawers 570x270x40 mm −1 drawer 570x270x60 mm
32 kg mm
L. H. D.
700435335
30 kg mm
L. H. D.
700380335
23 kg mm
L. H. D.
700435335
20 kg mm
L. H. D.
700292345
7
DrAwer Chests
Parallel jaw vice for workbenches• Fully forged steel model with jaws and body in one piece• Rear jaw shaped like an anvil• Ground prismatic double guide with screws for regulating the
parallelism of the jaws and for recovering tightness of grip• Supplied with pipe clamp jaws
DIMENSION (AXBXC)
LENGTH(L)
WHEIGHT
175x235x123 mm 532 mm 25 kg
L
A
B
C
RANGE OF WORK BENCHES
498 BCode U04980015
Static strength ofthe top up to 2.000 kg
(model 2 metre)
Version with wooden top30 mm
Lower shelf included
Sheet steel worktop2,5 mm with sides
Larger brackets90 mm
Reinforced structurein painted sheet steel
Arranged forground fixing
8
work benChes
WOOD
WOOD
WOOD
STEEL
STEEL
STEEL
506 A1/1000Code U05060001
506 A1/1500Code U05060002
506 A1/2000Code U05060003
• Dimension: 1.000x700x850 mm• Weight: 55 kg
• Dimension: 1.500x700x850 mm• Weight: 69 kg
• Dimension: 2.000x700x850 mm• Weight: 93 kg
• Dimension: 1.000x700x850 mm• Weight: 50 kg
• Dimension: 1.500x700x850 mm• Weight: 63 kg
• Dimension: 2.000x700x850 mm• Weight: 85 kg
506 A2/1000Code U05060011
506 A2/1500Code U05060012
506 A2/2000Code U05060013
1000 kg
1500 kg
2000 kg
1000 kg
1500 kg
2000 kg
9
work benChes
007 FBVCode U00070041
007 FBICode U00070048
007 FBECode U00070049
007 FBMCode U00070050
Folding tool bag (empty)• High strength fabric• 8 pockets for tools• Elastic straps to hold a hammer• Two handles for good grip• Rear belt to fix the bag to a trolley• Possibilty to add a shoulder belt (not included)• Optional shoulder belt: code U00070001Q
Folding tool bag with assortment for MAINTENANCE
Folding tool bag with assortment for ELECTRICIANS
Folding tool bag with assortment for MOTORCYCLES
900 g mm
L. H. D.
36029070
REAR BELT TO FIX THE BAG TO
A TROLLEYPossibilty to add a shoulder belt (not included)
360 mm
20PIECES
19PIECES
27PIECES
DESCRIPION ITEMS/SIZE PCS
Universal plier 150 CX 180 1Box-joint adjustable plier 180 C 250 1Hacksaw frame 201 1
Scissor for electricians 207 N 1
Angled hexagon keys withspherical head
280 LTS/S9: 1,5-2-2,5-3-4-5-6-8-10
9
Adjustable wrenche 294 A/200 1Screwdriversfor slot-head screws
322 0,8x4x100-1x5,5x100-0,6x3,5x75
3
Screwdrivers for PHILLIPS® screws
322 PH 1x100-2x125 2
Hammer 382/300 1
DESCRIPION ITEMS/SIZE PCS
Combination pliers 1000 V 085 N 180 1Screwdrivers for slot-head screws 1000V
092 0,4x2,5x75-0,8x4x100 2
Screwdrivers for PHILLIPS® screws 1000 V
092 PH 1x100-2x125 2
Screwdrivers for POZIDRIV® screws 1000 V
092 PZ 2x125 1
Scissor for electricians 207 E 1
Angled hexagon keys withspherical head
280 LTS/S9: 1,5-2-2,5-3-4-5-6-8-10
9
Reversible ratchet combination wrencheswith locking ring
285 KA 8-10-13 3
DESCRIPION ITEMS/SIZE PCS
Half-round extra-long nose pliers with straight jaws
133 CX 160 1
Universal plier 150 CX 180 1Long angled keys with spherical head for TORX® screws
280 LTSTX/S8 T10-T15-T20-T25-T27-T30-T40-T45
8
Angled hexagon keys withspherical head
280 LTS/S9 1,5-2-2,5-3-4-5-6-8-10
9
Combination wrenches 285 8-10-12-14 4Screwdriversfor slot-head screws
322 0,8x4x100-1x5,5x125 2
Screwdrivers for PHILLIPS® screws
322 PH 1x100-2x125 2
1000V
10
tool ContAiners
007 SBVCode U00070040
007 SB 150 CXCode U00070052
007 SB 178 NCCode U00070053
007 SB 294 ACCode U00070054
Compact tool bag (empty)• High strength fabric• Main compartment with zip closure• Back pocket with zip closure
Compact tool bag with screwdrivers and combination pliers
Compact tool bag with screwdrivers, angled hex keys, adjustable pliers and scissors
Compact tool bag with adjustablewrench and ratchet
60 g mm
L. H. D.
26011050
14PIECES
13PIECES
4PIECES
DESCRIPION ITEMS/SIZE PCS
Universal plier 150 CX 180 1
Screwdriversfor slot-head screws
322 0,5x3x75-0,8x4x100 2
Screwdrivers for PHILLIPS® screws 322 PH 1x100-2x125 2Angled hexagon keys withspherical head
280 LTS/S9 1,5-2-2,5-3-4-5-6-8-10 9
DESCRIPION ITEMS/SIZE PCS
Box-joint adjustable plier 178 N 250 1
Scissor for electricians 207 C 1
Hexagon keys 280 N/S9 1,5-2-2,5-3-4-5-6-8-10 9
Screwdriversfor slot-head screws
322 0,8X4X100 1
Screwdrivers for PHILLIPS® screws 322 PH 1x100 1
DESCRIPION ITEMS/SIZE PCS
Reversible ratchet combination wrenches with locking ring
285 KA 8-10-13 3
Adjustable wrenche 294 AC/150 1
260 mm
11
tool ContAiners
Folding top• Metal• To have more working surface when necessary• Maximum static load: 20 kg• Working surface: 36x45 cm• For current models: 518 SP, 519 R• For previous models 519 RX
519 RA6Code U05190217
Document suport• Metal• Possibility to hang A4 documents• For current models 519 R• For previous models 519 RX
519 RA8Code U05190219
Wooden top for vice• 23 mm multilayer beech• For current models 519 R• For previous models 519 RX• Vice not included
519 RA9Code U05190218
Stanley Black & Decker Italia S.r.l.Via Volta, 3 - 21020 Monvalle (VA)
Tel. +39 0332 790111 - Fax +39 0332 [email protected]
usag-tools.net
The images shown in this catalogue are not binding.Stanley Black & Decker Italia S.r.l. reserves the right to change the technical characteristics of its products at any time.
ACCessories for roller CAbinets