power tools

Unitis ContraCtor sUpplies

Pow

er T

ools

27858-332-2133

Item # 10801197

1/2” Hammerdrill witH Pistol GriP

Item # 10801311

drywall screwdriver

Item # 10801312

1/2” imPact wrencH

Item # 10801313

• 7.0 Amp Motor• 600-1800 RPM and 1000-2600 IPM (no load)• 300 ft./lbs. of torque - more torque saves time• AC-only variable speed reversing switch

• 7.5 Amp Motor• Variable RPM: 0-1350 RPM, 0-2500 RPM• Variable BPM: 0-22,000 BPM, 0-40,000 BPM• Hammer with rotation or rotation only

1/2” Hole-HawG drill• 7.5 Amp Motor• Delivers 300 RPM and 1200 RPM with Reverse• Up to 4-5/8” Capacity

Item # 10801314

1/2” electric drill

Item # 10000728

• 7.8 Amp Motor• Reversible, variable-speed control from 0 to 850 rpm• Pistol grip with two-finger trigger for comfort and control• Versatile, 360-degree side handle for easy maneuvering

3/8” Pistol GriP drill

Item # 10000024

• 8.0 Amp Motor• 3/8” all-metal ratcheting keyless chuck• 0-2,500 RPM for versatility in drilling and fastening applications• Soft grip handle design offers increased gripping surface and comfort

3/8” electric drill• 8.0 Amp Motor• Delivers up to 2800 RPM• Variable Speed Trigger• Heavy Duty Keyless Chuck

1/2” maGnum drill

Item # 10801302

• 8.0 Amp Motor• 0-850 RPM• Heavy-duty keyed chuck, all-metal gear case and diaphragm• Ergonomic textured grip

Corded Drills & Impacts

• 6.5 Amp Motor• 0 - 4,000 RPM• Snap action clutch• Fixed, Quik-Lok double insulated cord


Power Tools

28 858-332-2133

4-1/2” anGle Grinder• 7.0 Amp Motor• 11,000 RPM• Oversized spindle provides faster, easier wheel changes• Side handle provides increased comfort and control

4-1/2” anGle Grinder• 13 Amp Motor• 11,500 RPM• Super Joint System (SJS) helps prevent gear damage• Large ergonomic paddle-switch for operator comfort

4-1/2” anGle Grinder• 12 Amp Motor• 2,800 - 10,500 RPM• Super Joint System (SJS) helps prevent gear damage• Electronic limiter reduces accidental motor overload and burnout

Item # 26400938

4-1/2” anGle Grinder

Item # 11104669

7”/9” larGe anGle Grinder• 15.0 Amp Motor• 4.2 HP Motor• 6,000 RPM• Optimal speed for material removal

Item # 10803646

4-1/2” anGle Grinder witH case• 7.5 Amp Motor• 11,500 RPM• Paddle Switch

Item # 26401024

7”/9” larGe anGle Grinder

Item # 26400939

• 6.0 Amp Motor• 11,000 RPM• Tool-free change guard for simple guard removal• Spindle lock makes single wrench bit changes possible• 3-position side handle provides better tool control

Item # 10000003

• 15.0 Amps• Extra heavy-duty motor for high production and continuous use• 6,000 rpm for optimum material removal• Accepts 7” or 9” wheel with correct guards• Removable side handle can be mounted on either side

Item # 26406674

Grinders


Pow

er T

ools

29858-332-2133

¼- sHeet Palm sander

Item # 10800168

• 3.0 Amp Permanent Magnet Motor with 14,000 Orbits Per Minute• Pad Cushioning and Break• Tactile Rubber Top and Body Grip Surface and Narrow Sander Body• Large Paper Clamp Tabs• Removable Top

7” disc sander

Item # 26400937

• Powerful 5.2 AMP motor delivers 4,000 RPM for smooth sanding• Refined design at 6.3 lbs. for reduced operator fatigue• Ball and needle bearing construction for longer tool life and smooth operation• Lock-on button for continuous use and added user preference• Double insulated

comPact Band saw

Item # 10801303

• 45% Lighter than Deep Cut• 200-360 SFPM Variable Speed Dial• 3-1/4” Cut Capacity• LED Work Light• Blade Ejection System

10 amP reciProcatinG saw• 4-position blade clamp• 10 Amp motor designed for heavy-duty applications• 0-2,800 strokes per minute• 1-1/8” stroke length delivers fast cutting

Item # 10003939

12 amP reciProcatinG saw• 0-3,000 SPM for high performance cutting in a variety of materials• 3/4-Inch stroke length provides maximum cut control• Quik-Lok blade clamp provides fast , tool-free blade changes

Item # 10801110

15 amP, 7-1/4” worm drive saw

Item # 11203812

15 amP, 7-1/4” maGnesium saw• Magnesium components create a saw with less weight (13.0 lbs.) that’s jobsite tough• Large cutting capacity (2-3/8 in. at 90°)• Retractable hook allows tool to remain close but never in the way

Item # 26401067

• 20 amp switch and heavy gauge cord• Anti-Snag Lower Guard reduces snags• Die-cast aluminum motor and gear housings for durability• Push button blade lock for easy blade changes• Two position saw hook for safe rafter placement

toP Handle JiGsaw witH l.e.d. liGHt

Item # 26402144

• Built-in L.E.D. light• Variable speed dial (800 - 2,800 SPM) and electronic speed control• 3 orbital setting plus straight cutting for cutting a variety of materials• AVT and dynamically-balanced motor reduce vibration by over 40%

Saws & Sanders


Power Tools

30 858-332-2133

18v lXt litHium-ion cordless 2-Pc. comBo Kit• 18V LXT 1/2” Hammer Driver-Drill (BHP454) & 18V LXT Impact Driver (BTD141)• Makita-built, 4-pole motor delivers 560 in.-lbs. of maximum torque• 2-speed all-metal transmission (0 to 400 RPM and 0 to 1,700 RPM) covers a wide range of drilling, driving and hammer applications• Compact design at only 9-9/16” long• Built-in LED lights illuminate the work area

Item # 26406155

18v litHium-ion Batteries

raPid Battery cHarGer

Item # 26403618

18-volt lXt litH-ion 4-tool Kit

• Charging Technology: Rapid Optimum Charger communicates with the battery’s built-in chip to optimize battery life by actively controlling current, voltage and temperature; and has a built-in fan to cool the battery to produce more lifetime work.• More Work: LXT Lithium-Ion batteries and Rapid Optimum Chargers produce 430% total lifetime work with 2.5x more cycles than Ni-Cd batteries.• Faster Charging: 18V LXT Lithium-Ion Batteries charge in 30 minutes. 18V Compact Lithium-Ion Batteries charge in 15 minutes; 4X Faster than Ni-Cd batteries.• Less Weight: LXT Lithium-Ion Batteries weigh 40% less than Ni-Cd.

• Charging Technology: Controls current, voltage & temperature to maximize battery life• Central Processing Unit (CPU): Analyzes data from the battery’s memory chip• Forced Air Cooling Fan: Cools the battery by forcing cool air through the battery’s built-in air vents• Fast Charging: Quickly charges an 18V 3.0 Amp hour Li-Ion battery in only 30 minutes• Energy Star

18v cordless drill & imPact Kit• 2-speed 1/2-inch hammer driver-drill (0-400/0-1, 500 RPM) with 4-pole motor delivers 450 inch-pounds of max torque• Variable-speed impact driver (0-2, 300 RPM) provides 1, 330 inch- pounds of max torque• Tools feature built-in LED light to illuminate the work area and a rugged tool belt clip• LXT lithium-ion battery and Energy Star-rated 30-minute charger produce 430 percent total lifetime work with 2.5 times more cycles• Three-year warranty on tools and one-year warranty on batteries and charge

Item # 2640405726403018 18V Battery26406146 Two Pack 18V Battery

Item No. DeSCRIPtIoN

Item # 26407857

• Variable 2-speed 1/2-inch Hammer Driver-Drill (0-400 & 0-1,500 RPM) with 4-pole motor delivers 480 inch-pounds of Max Torque• 6-1/2-inch Circular Saw with a Makita-built, D35 high torque motor delivers maximum power for cutting 2x material at 45- with 50-inch maximum capacity• Reciprocating Saw with a Makita-built D35 high torque motor delivers 0-2, 900 Strokes per minute and weighs only 7.7-Pound• 4-Position Flashlight with Xenon bulb runs over 4 hours per charge

3 Hour Battery cHarGer

Item # 26402973

• Ni-MH & Ni-Cd Battery Charger for all Makita stick and pod style batteries.• Works on Makita Ni-Cd & Mi-MH (Stick & Pod style) batteries• Charges Makita batteries - 7.2Volt through 18-Volt.

Makita Cordless Tools


Pow

er T

ools

31858-332-2133

18v lXt® litHium-ion cordless 1/2” Hammer driver-drill• Makita-built 4-pole motor delivers 560 in.lbs. of Max Torque and 360 in.lbs. of PTI torque• Variable 2-speed design (0-400 & 0-1,700 RPM) covers a wide range of drilling, driving and hammer applications• Compact design at only 9-9/16” long and weighs only 5.3 lbs. for reduced operator fatigue• All metal gears and aluminum gear housing for maximum jobsite durability• Shift-Lock drive system quickly shifts between modes• 2 built-in L.E.D. lights with afterglow illuminate the work area• Ergonomic shape fits like a glove with even pressure and easy control• Soft grip handle provides increased comfort on the job• LXT Lithium-Ion battery and Rapid Optimum Charger produces 430% total lifetime work with 3x more cycles• 3-year warranty on tool• Battery and charger sold separately

Item # 26406149

18v lXt® litHium-ion cordless 6-1/2” circular saw• Makita-built motor delivers 3,700 RPM for faster cutting and ripping through wood• 6-1/2” blade delivers a 2-1/4” cutting capacity for a wide range of cutting applications• 50° maximum bevel cutting capacity• Compact, ergonomic design at only 7.3 lbs. for reduced operator fatigue• Heavy gauge, precision machined base for smooth, accurate cutting and added durability• Soft grip handle provides increased comfort on the job• LXT Lithium-Ion battery and Rapid Optimum Charger produces 430% total lifetime work with 3x more cycles• 3-year warranty on tool• Battery and charger sold separately

Item # 26406150

18v lXt® litHium-ion cordless 7/8” rotary Hammer• Makita-built variable speed motor delivers 0-1,100 RPM and 0-4,000 BPM• Faster drilling with synchronized RPM and BPM• 3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications• Torque limiting clutch reduces gear damage by automatically disengaging gears if bit binds• Jobsite tested shock absorbent handle protects the battery housing for extra durability• One-Touch sliding chuck for easy bit changes• Chisel rotates 360° with 40 different positions• Compact design at 16-3/8” long and weighs only 7.7 lbs. for reduced operator fatigue• Large 2-finger variable speed trigger for added convenience• Soft grip handle provides increased comfort on the job• LXT Lithium-Ion battery and Rapid Optimum Charger produces 430% total lifetime work with 3x more cycles• 3-year warranty on tool• Battery and charger sold separately

Item # 26406153

18v lXt® litHium-ion cordless imPact driver• Makita-built 4-pole motor delivers 1,420 in.lbs. of Max Torque• Variable speed (0-2,300 RPM & 0-3,200 IPM) for a wide range of fastening applications• Compact design at only 5-7/16” long and weighs only 3.3 lbs. for reduced operator fatigue• Convenient one-touch 1/4” hex chuck for quick bit changes• New redesigned rubberized soft grip provides increased comfort on the job• Extreme Protection Technology (XPT) engineered for dust and water resistant reliability for operations in various harsh climates• Built-in L.E.D. light with afterglow illuminates the work area• Ergonomic shape fits like a glove with even pressure and easy control• Makita’s proprietary hammer and anvil impact mechanism are manufactured using the best raw materials with the highest quality steel and unique heat hardening process for maximum fastening and driving power• LXT Lithium-Ion battery and Rapid Optimum Charger produces 430% total lifetime work with 3x more cycles• 3-year warranty on tool• Battery and charger sold separately

Item # 26406154



Power Tools

32 858-332-2133

18v reciProcatinG saw• Makita-built variable speed motor delivers 0-2,900 strokes per minute combined with a 1-1/8” length stroke to provide faster cutting• “Tool-less” blade change system allows for faster blade installation and removal for increased productivity• Compact, ergonomic design at only 7.9 lbs. for reduced operator fatigue• Soft grip handle provides increased comfort on the job• LXT Lithium-Ion battery and Rapid Optimum Charger produces 430% total lifetime work with 3x more cycles• 3-year warranty on tool• Battery and charger sold separately

Item # 26406151

18v lXt® litHium-ion cordless 5-3/8” metal cuttinG saw• Makita-built motor delivers 3,600 RPM for faster cutting in a wide range of metals including Unistrut® all thread, channel, conduit, pipe, sheet metal, square tubing, steel and more• Compact, ergonomic design at 13-3/4” long and weighs only 5.7 lbs. for reduced operator fatigue• Built-in L.E.D. light illuminates the work area• Soft grip handle provides increased comfort on the job• LXT Lithium-Ion battery and Rapid Optimum Charger produces 430% total lifetime work with 3x more cycles• 3-year warranty on tool• Battery and charger sold separately

Item # 26406152

18v lXt® litHium-ion cordless Blower• Makita-built variable 3-speed motor produces a maximum air velocity of 179 MPH• Up to 12 minutes of continuous operation from a single charge at high speed• Variable speed (0-18,000 RPM) for optimal speed control• Compact design at only 20” long and weighs only 3.7 lbs. for reduced operator fatigue• Soft grip handle provides increased comfort on the job• LXT Lithium-Ion battery and Rapid Optimum Charger produces 430% total lifetime work with 3x more cycles• 3-year warranty on tool• Battery and charger sold separately

Item # 26403617

18v 1/4” driver• 3-speed power selection switch (0-1,300, 0-2,000, 0-2,600 RPM & 0-1,300, 0-2,800, 0-3,400 IPM) provides the user with precise fastening control for a wide range of applications• Makita-built Brushless Motor delivers 1,460 in. lbs. of Max Torque• Makita-built Brushless Motor Technology delivers increased motor efficiency to provide up to 20% longer battery life per charge• Battery warning light and built-in L.E.D. light both flash when it is time to recharge the battery• Compact design at only 5-1/2” long and weighs just 3.3 lbs. for reduced operator fatigue

Item # 26402355



Pow

er T

ools

33858-332-2133

•Lightweight design• Dual speed range 0-500/0- 1700 rpm • LED work light provides increased visibility in confined spaces• Compact size (8.2”)

18v 1/2” cordless comPact drill/driver

Item # 10004658

• Patented 3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time• Heavy-duty 1/2” metal ratcheting chuck with carbide inserts• LED worklight• High power, high efficiency motor delivers 450 unit watts out of max power•Best in class length for improved balance and better control

1/2” 18v cordless XrP Hammerdrill/drill/driver

Item # 10004659

• Frameless motor for extended tool durability and life• Compact size and weight • 1,740 in-lbs of torque • 0-2,400 rpm/0-2,700 ipm • Textured anti-slip comfort grip• Durable magnesium gear case and all metal transmission for extended durability• Heavy-duty impacting mechanism directs torque to fastener without kickback

1/2” 18v cordless imPact wrencH

Item # 10004662

• Frameless motor for extended tool durability and life• Compact size and weight• 1,330 in-lbs of torque 0-2,400 rpm/0-2,700 ipm• Textured anti-slip comfort grip • Heavy-duty impacting mechanism --directs torque to fastener without kickback

1/4” 18v cordless imPact driver

Item # 10004660

• 300 ft-lbs of maximum torque• 1,650 rpm/2,600 ipm • Rocker switch design for fast and easy fastening• Comfort grip • Heavy-duty impacting mechanism directs torque to fastener without kickback


Item # 10004663

• Frameless motor for extended tool durability & life• Compact size and weight • 1,500 in-lbs of torque • 0-2,400 rpm/0-2,700 ipm • Replaceable brushes• Textured anti-slip comfort grip• Durable magnesium gear case and all metal transmission• Heavy-duty impacting mechanism directs torque to fastener without kickback


Item # 10004661

Dewalt Cordless Tools


Power Tools

34 858-332-2133

• All-metal lever-action keyless blade change allows for quick and easy blade changes• All-metal keyless shoe bevel with detents at 0°, 15°, 30° and 45° • 4-position orbital action provides control of cut quality and speed• Adjustable dust blower • Variable speed 0-3,000 spm• Anti-slip comfort grip

18v cordless JiG saw w/ Keyless Blade cHanGe

Item # 10004665

18v cordless cut-off tool

Item # 10004666

• 6,500 rpm • 2 Position side handle • Quick-change wheel • Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces

• 3,700 RPM for fast rip cuts and cross cuts• 6-1/2” carbide tipped blade for 2x cutting capacity at 90° and 45°• High strength magnesium shoe and upper guard provides increased durability• 0-50° bevel capacity provides additional capacity for a multitude of applications• Fan-cooled motor with replaceable brushes

6-1/2” 18v cordless circular saw

Item # 10004617

•1-1/8” stroke length • 0-3,000 spm for faster cutting speed• 4-position blade clamp• Lever-action keyless blade clamp• Anti-slip comfort grip • Pivoting adjustable shoe with open top • Variable speed with trigger lock for increased blade control

18v cordless reciProcatinG saw

Item # 10003179

• Tool-free bit change for fast and eay bit changing without a wrench• 26,000 rpm motor provides more cutting power• Dust sealed switch provides durability and long switch life

18v cordless cut-out tool

Item # 10004668

• Dual clean-up modes allow for debris clean up with either the front utility nozzle or extendable rubber hose• 1/2 gallon tank with heavy-duty latch is easy to empty and clean• Gore™ HEPA wet/dry filter traps 99.97% of dust at 0.3 microns• Washable filter- tap or water rinse to clean• Heavy-duty rubber hose

18v cordless 1/2 Gallon wet/dry PortaBle vac

Item # 10004667



Pow

er T

ools

35858-332-2133

18v Battery PacK• High capacity XRP™ battery has 40% more run-time than standard batteries• Powers entire DEWALT® line of 18V tools allowing users to run multiple tools off of the same battery pack

Item # 10001980

18v Battery comBo PacK• 2 High capacity XRP™ batteries have 40% more run-time than standard batteries• Powers entire DEWALT® line of 18V tools allowing users to run multiple tools off of the same battery pack

Item # 10001982

7.2v-18v nicd/nimH/li-ion fast cHarGer• Charges all DEWALT® 7.2V - 18V NiCd/NiMH/Li-Ion batteries (except Univolt batteries) so users need only one charger for multiple cordless products• Charges the battery in 1 hour or less thus minimizing downtime• The DEWALT® 3-stage charging system provides maximum run-time and extends overall life of the battery• Diagnostics with LED indicator communicates battery charge status: charged, charging, power line problem, replace pack, and battery too hot or too cold

Item # 10005269

7.2v-18v nicd/nimH/li-ion 1 Hour dual Port cHarGer• Charges all DEWALT® 7.2V - 18V NiCd/NiMH/Li-Ion batteries (except Univolt batteries) so users need only one charger for multiple cordless products• Charges the battery in 1 hour or less thus minimizing downtime• The DEWALT® 3-stage charging system provides maximum run-time and extends overall life of the battery• Diagnostics with LED indicator communicates battery charge status: charged, charging, power line problem, replace pack, and battery too hot or too cold

Item # 10003632



Power Tools

36 858-332-2133

2 Gallon cordless/corded wet/dry vac• Runs off of 12V-18V DEWALT battery packs or 120V AC• Gore™ wet/dry filter traps 99.7% of drywall dust• Wet/Dry Filter Eliminates Change Overs• Washable filter; Tap or water rinse to clean• Heavy-duty rubber hose provides durability and flexibility• Drain port on tank for easy emptying of liquids• On-board hose, cord and accessory storage provides convenient transport and storage

Item # 10005400

1/2” 18v cordless Hammerdrill/drill/driver Kit• XRP™ extended run-time batteries provide long run-time and battery life• Patented 3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time• Heavy-duty 1/2” metal ratcheting chuck with carbide inserts provides superior bit gripping strength• LED worklight provides increased visibility in confined spaces• High power, high efficiency motor delivers 450 unit watts out of max power for superior performance in all drilling and fastening applications• Best in class length for improved balance and better control

Item # 10000009

18v 1/2’’ cordless comPact drill/driver Kit• Compact size: allows users to fit into tight spaces• Lightweight design (4.8 lbs.) minimizes user fatigue• 1/2’’ ratcheting chuck reduces bit slippage• Dual speed range 0-500/0-1,700 rpm delivers optimal performance• High performance frameless motor delivers maximum power of 410 unit watts out• LED worklight provides increased visibility in confined spaces

Item # 10000005

18v cordless reciProcatinG saw Kit• 1-1/8” stroke length for faster cutting speed• 0-3,000 spm for faster cutting speed• 4-position blade clamp allows for flush cutting and increased versatility• Keyless lever-action blade clamp for quick and easy blade changes• Pivoting adjustable shoe with open top for maximum visibility• Anti-slip comfort grip provides increased comfort and control• Variable speed with trigger lock for increased blade control• XRP™ extended run-time batteries provide long run-time and battery life

Item # 10001361

18 v cordless drill driver• High-performance motor delivers 380 watts• 1/2 in. single-sleeve ratcheting chuck enables tight grip for a variety of bits• Dual speed range of 0 - 450 RPM and 0 - 1,500 RPM for versatility• Lightweight design at only 5.2 lb. to minimize fatigue• Compact size to fit in tight locations• 17 clutch settings to meet the needs of almost any job• Cordless design allows mobility• NiCad battery charges in 60 minutes• CSA listed• Includes tool, battery, charger and case

Item #10003645



Pow

er T

ools

37858-332-2133

sawzall® m18™ cordless litHium-ion reciP saw tool Kit

Item # 10801304

m18™ cordless litHium-ion 2-tool comBo Kit

Item # 10803519

• Compact drill/driver delivers 400 inch-pounds of torque; weighs 4 pounds; 7-3/4” long• 1/4” hex compact impact with 4-pole frameless motor delivers 1400 inch-pounds of torque• Lightweight durability, built-in LED lights, battery fuel gauges and variable-speed triggers• Includes: 18-volt compact drill/driver, 1/4-inch hex impact driver, 2 compact batteries, charger, and one belt clip

• Patented Gear-Protecting Clutch extends the life of the tool• Lever Action QUIK-LOK Blade Clamp and Variable speed trigger• Battery fuel gauge displays remaining run-time• Includes: 18V XC Sawzall, 2 18V XC Batteries, Charger, Case, General purpose blade

m18™ cordless litHium-ion 2-tool comBo Kit

Item # 10804000

• Heavy-duty 2-speed metal gear box• Compact motor delivers 400 inch-pounds of maximum torque• Built-in LED light illuminates work surfaces• Lightweight at 4-pounds• Superior bit grip with Yukiwa chuck

Milwaukee Cordless Tools

m18™ cordless litHium-ion 4-1/2” cut-off / Grinder• 4-pole motor delivers maximum power when cutting or grinding• Overload protection prevents damage to the tool and battery in abusive situations• L-shape vents keep debris from entering the tool and damaging internal components• Tool free, burst resistant guard allows for quick, easy guard adjustments

Item # 10803601

• Voltage: 18V, Anvil Size: 1/2”, Anvil Type: Detent, Torque: 2200 in-lbs, RPM: 0-2200 RPM, IPM: 0-3200 IPM• 1/2” Detent Pin: provides positive bit retention• Milwaukee 4-Pole Frameless Motor: maximum efficiency and run-time• Built-In LED Light: illuminates work surface

Item # 10804346

m18™ cordless litHium-ion 1/2” comPact imPact wrencH w/Pin detent

• 1/4” Hex quick change allows for easy bit changes• 3. Milwaukee Designed Impact Mechanism provides faster application speed and Variable speed trigger gives increased control• Milwaukee 4-Pole Frameless Motor maximizes tool efficiency to increase run-time• Belt clip allows for easy portability, Built-in LED light illuminates work surface and On-board battery fuel gauge displays remaining run-time

Item # 10804533

m18™ cordless litHium-ion ¼” HeX comPact imPact driver Kit


Power Tools

38 858-332-2133

• Up to 40% More Run-Time, 20% More Speed, 20% More Torque• 1.5 Amp hour - 27 Watt hour battery; Battery fuel gauge displays charge status on tool• Durability: Operates Down to 0°F, Runs 20% Cooler, Up to 50% More Recharges• Equivalent run-time with 40% less weight than a “compact” 18V NiCd battery; Lithium-ion battery delivers long life and run time with fade-free power

m18™ comPact red litHium™ Battery

Item # 10805791

• Quickly Charges all M18 Batteries• Charger communicates with battery pack to manage: Individual cell voltage, Temperature, Charge status• Features a pass-through plug design for added outlet availability• Charges both M18 Lithium-Ion batteries and M18 Red Lithium batteries

m18™ litHium-ion Battery cHarGer

Item # 10801306

• Two 28-volt, 3.0-amp hour lithium-ion batteries; power gauge on batteries indicates charge level; reversible batteries slide onto saw from front or back• Two-speed, variable-speed motor (0-2000, 0-3000 spm) for metal- and wood-cutting; superior 1 1/8-Inch blade stroke• Quik-Lok blade clamp for quick, tool-free blade changes; keyless shoe adjustment• Gear-protecting clutch for extreme durability and impact protection• 5-year limited warranty

Item # 10801307

m28™ cordless litHium-ion sawzall® reciProcatinG saw Kit

Powering the entire M28™ LITHIUM-ION system, this re-designed and improved battery pack provides the durability, run-time and power needed to complete the toughest jobs. This improved battery pack features Milwaukee’s Digital Power Management system, which helps to ensure that optimal battery life and run-time is achieved, while protecting the battery and tool during the toughest jobsite applications.

m28™ cordless litHium-ion sawzall® reciProcatinG saw Kit

Item # 10801310

• Versatile and reliable 18-to-28-volt universal battery charger• Charges both Li-Ion and Ni-Cad batteries from 18- to 28-volts• Top-off conditioning mode automatically conditions 18-volt Ni-Cad battery cells to extend run-time and life• Automatic temperature monitoring delivers the correct charge current for that temperature• Pass-through plug conserves outlet real estate

18v-28v universal cHarGer

Item # 10801309

This Milwaukee 18V Lithium-Ion Battery works on the M18™ Cordless Tool System and has 3.0 Amp Hours of run-time. This battery powers over 40 Milwaukee M18™ cordless tools. Managed by Milwaukee’s exclusive REDLINK™ Intelligence, the battery features Overload Protection, a Temperature Management System, Individual Cell Voltage Monitoring, Discharge Protection and a Battery Fuel Gauge.

m18™ Xc HiGH caPacity red litHium™ Battery

Item # 10801305



Pow

er T

ools

39858-332-2133

m12™ cordless litHium-ion 3/8’’ riGHt anGle drill driver Kit• 3/8” single-sleeve ratcheting chuck for maximum versatility and grip; 3-3/4” head length great for working in tight spaces• Extended paddle switch allows for con trolled use In multiple positions• 11 settings plus drill mode for complete control, built-In LED lights illuminate work surface and indicate clutch out• On-board fuel gauge displays remaining run-time on the M12 lithium-ion battery pack• Includes: Right-angle drill/driver, M12 lithium-ion battery pack, 30-minute charger, carrying case

Item # 10805736

m12™ cordless litHium-ion 4 tool comBo Kit • 12V Cordless M12 3/8-in Drill Driver - 2410-20• 2-speed (0 to 1,500 RPM and 0 to 400 RPM) all-metal gear box provides up to 35% faster drill and fastening, as well as Milwaukee durability• Powerful motor delivers 250 in-lbs. of torque on low speed or 150 in-lbs. of torque on high speed• 3/8-in single sleeve ratcheting metal chuck for increased bit retention and durability• Lightweight and compact at only 2.5 lbs. and 7-3/8-in

Item # 10805737

m12™ cordless litHium-ion screwdriver• 150 in.lbs of torque and a speed of 0 to 500 rpm• Battery fuel gauge displays remaining run-time• Built-in LED For illumination of dark work spots• Quick bit-loading 1/4” hex chuck for bit insertion and release with one hand• Metal gear housing provides job site durability

Item # 10805728

HacKzall™ m12™ cordless litHium-ion reciP saw• Voltage: 12V• Speed: 0-3000 SPM• Stroke Length: 1/2”• Blade Clamp: QUIK-LOK Universal 1/2” Tang, Trigger: Variable Speed• Includes: 2420-20, (1) 12V LITHIUM-ION Batteries (48-11-2401) Pack, 30-Minute Charger (48-59-2401), Hackzall Blade, Carrying Case

Item # 10804579

m12™ cordless litHium-ion 3/8” Hammer drill driver Kit• Powerful Motor: Delivers best in class 275 in-lbs of torque• Compact & Lightweight: 7-5/8” length, 2.8 lbs• 2-Speed Metal Gear Box: 0-22,500 BPM, 0-400 / 0-1,500 RPM• 3/8” Metal Single Sleeve Ratcheting Chuck: Maximum Durability, Grip, and Bit Retention

Item # 10805727

m12™ cordless litHium-ion 3/8” drill driver • 2-speed (0-1,500/0-400) all metal gear box, up to 35% faster drilling and fastening• Delivers 250 in/lbs of torque• 3/8” single sleeve ratcheting metal chuck, increased bit retention and durability• Portable tool belt portable only 2-1/2 pounds and 7-3/”• Integrated LED and fuel gauge increases productivity and decreases frustration

Item # 10805738



Power Tools

40 858-332-2133

m12™ cordless litHium-ion multi-tool Kit • Application versatility: cuts, grinds, sands, and scrapes• RED LITHIUM battery offers extended run time• Variable speed with 12 settings (OPM 5,000 to 20,000)• Accessory adapter included• Onboard fuel gauge displays remaining run time

Includes• Adapter• Wood Cutting Blade• Sanding Pad• (5) Assorted Sanding Sheets• (2) M12 RED LITHIUM™ Batteries• 30-Minute Charger• Contractor Bag

Item # 10805729

m-sPector 360™ Kit• Rotating screen provides fluid image control• Optimized 2.7-in LCD digital image display delivers crisper and clearer picture quality• Digital image sensor provides superior image quality in nearly half the size• 4 surrounding LED lights illuminate work areas without shadow or glare• Aluminum head and improved flexibility offer unmatched durability and maneuverability

Item # 10805732

m12™ cordless litHium-ion rotary tool• Powerful Motor - Unmatched performance under load• 1/8-inch Collet - Compatible with all current rotary tool accessories• Variable Speed (5,000-32,000) - Up to 10-percent faster than the competition• Compact and Lightweight - Only 9.5-inch long and 1.3-pounds• Milwaukee Durability: Grinder style exhaust ports and protected front bearing deliver up to 10X the tool life

Includes• 2460-20 M12™ Cordless LITHIUM-ION Rotary Tool• (1) M12™ REDLITHIUM™ Battery• (5) Cutting Wheels, mandrel• Wrench• 30-Minute Charger

Item # 10805730


Item # 10805734

m12™ cordless suB-comPact Band saw Kit • Lightest weight amongst cordless band saws easily allows for one-handed cuts• Cuts 3/4-in EMT in 3 seconds, up to 150 cuts per charge with the XC battery• 1-5/8-in Cut Capacity for a wide range of cutting applications• Meets OSHA guarding requirements and is suitable for one-handed use• LED light highlights the cut line

Includes• 2429-20 M12 Sub-Compact Band Saw Tool• 30-Minute Charger• (1) M12™ XC High Capacity REDLITHIUM™ Battery• (1) 48-39-0572 18TPI Sub-Compact Portable Band Saw Blade• Carrying Case

Item # 10805733

m12™ cordless litHium-ion 3/8” square drive imPact wrencH w/ rinG• Delivers up to 1,000 in lbs of torque• 3/8” Anvil with Friction Ring Retention Easy socket insertion/release • Anvil Type: Square, Torque: 1000 in-lbs, RPM: 0-2200 RPM, IPM: 0-3000 IPM• On-Board Fuel Gauge - Displays Remaining Run-Time.• Built In L.E.D - Illuminates Work Surface

m12™ cordless suB-comPact Band saw• Lightest weight amongst cordless band saws easily allows for one-handed cuts• Cuts 3/4-in EMT in 3 seconds, up to 150 cuts per charge with the XC battery• 1-5/8-in Cut Capacity for a wide range of cutting applications• Meets OSHA guarding requirements and is suitable for one-handed use• LED light highlights the cut line

Item # 10805731


Pow

er T

ools

41858-332-2133

m12™ Xc HiGH caPacity redlitHium™ Battery Milwaukee REDLITHIUM™ batteries are the next generation in Lithium Ion technology. Compatible with all products in the M12 Cordless tool system,REDLITHIUM™ battery packs will provide unmatched runtime, performance and durability for the professional tradesman.

Item # 10805741

m12™ red litHium™BatteryMilwaukee RED LITHIUM™ batteries are the next generation in Lithium-Ion technology. Compatible with all products in the M12™ Cordless tool system, RED LITHIUM™ battery packs will provide unmatched runtime, performance and durability for the profession-al tradesman.

Item # 10805746

m18™ and m12™ multi-voltaGe cHarGerThe M18™ and M12™ Multi-Voltage Charger accepts all M18™ and M12™ batteries, minimizing the need for extra chargers on the jobsite. This combo charger requires less time to manage charge cycles, by sequentially charging the battery packs.

Item # 10806521

m12™ cordless led worK liGHt• 2X Brighter and Whiter than Incandescent• 2X Longer Run Time with Less Heat• Sealed, Aluminum Head - Impact and Weather Resistant Magnetic Back Enables Hands-Free Use• 90 Degree Rotating Head

Item # 10805739

m12™ cordless worK liGHt• 90-degree pivoting head• Ergonomic, compact, and lightweight design• Integrated magnet

Item # 10805740


• M12 radio is equipped with premium weatherproof aluminum speakers• Contains a weather sealed MP3 compartment• Shock absorbing housing• The M12 radio is only 10 1/2-inch narrow, 3.5 lbs, and is powered by M12 lithium-ion battery pack or AC adaptor

m12™ cordless radio

Item # 10805735


Power Tools

42 858-332-2133

1/2” dual ranGe Hammerdrill• 7.8 Amp motor provides high performance and overload protection• High/low gear for high speed drilling, or high toque applications• Dual mode: hammerdrill/drill for wood, steel or masonry applications• Lightweight design for easy use and handling in a variety of orientations• Two-finger, rubber trigger for increased comfort• 360° side handle with depth rod offers greater control, versatility, and increased depth accuracy• Variable speed allows for precise hole placement on work surface

Item # 10008273

7/8” comPact rotaryHammer• 6.9 amp motor provides high performance and overload protection: (0-1,550 RPM, 0-4,550 BPM)• Variable speed trigger allows user to instantly control speed from 0 to dialed setting• Lightweight design for easy use and handling in a variety of orientations• Mode selector allows for usage in rotary hammer, rotary only, and chiseling applications• Reversing feature helps release tool from bind up situations, and assists with removal of fasteners• 360 degree side handle adjusts easily for preference or use in tight spaces• D-handle design offers preferred balance for downward drilling

Item # 10007798

1” sds-Plus rotary Hammer• Three operation modes: rotary hammer, hammer-only and rotation-only mode• Capable of 2.2 foot-pounds of impact energy• Vario-Lock Positioning rotates and locks chisel into 36 different positions to optimize working angle• Powerful 7.5-amp motor• Patented rotating brush plate provides equal power in forward and reverse

Item # 11200202

1” sds-Plus roto Hammer• Powerful 7 AMP motor; 0-1,100 RPM & 0-4,500 BPM for demanding applications• 3-mode operation: “rotation only”, “hammering with rotation” and “hammering only” for multiple applications• Ergonomic D-shaped handle with rubberized soft grip for increased comfort and control• One-touch sliding chuck allows for quick bit changes• Built-in Torque Limiter for stable torque control

Item # 26407794

1” d-Handle tHree mode sds Hammer• 2.5 ft-lbs of impact energy provide fast drilling and powerful chipping• 8.0 Amp motor provides high performance and overload protection• Reverse feature assists in the removal of fasteners• Variable speed allows for precise hole placement on work surface• Factory-set clutch reduces sudden, high torque reactions if bit jams• 360° side handle adjusts easily for preference or use in tight spaces

Item # 10007098

Roto Hammers

1” d-Handle sds rotary Hammer

Item # 10007799

• 8 amp motor provides high performance and overload protection: 0-1,150 RPM, 0-4,300 BPM• Variable speed trigger allows user to instantly control speed from to dialed setting• Delivers 2.5 ft lbs. of Impact Energy, providing fast drilling and powerful chipping• Shocks active vibration control reduces vibration up to 50 percent while increasing user comfort and productivity• Mode selector allows for usage in rotary hammer, rotary only, and chiseling applications Reversing feature helps release tool from bind up situations, and assists with removal of fasteners


Pow

er T

ools

43858-332-2133

1” l-sHaPe sds rotary Hammer Kit• L-Shape Design offers superior balance and control• 2.5 ft-lbs of impact energy provides fast drilling and powerful chipping• 8.0 Amp motor provides high performance and overload protection• At only 11-1/2” this hammer is the most compact in the market allowing users to get into tight spaces• Light weight design (6.5 lbs) provides comfort for extended use• Dust Extraction Connection allows the use of the D25300D dust collection system• Chipping (Hammer-Only) mode allows user to perform light chipping applications, such as removal of mortar splatter

Item # 10007800

1-9/16” sds maX comBination Hammer Kit• 12 Amp Motor provides high performance & overload protection;490 rpm’ 3300 bpm• 8.0 ft lbs. of Impact Energy provides fast drilling and powerful chipping• Rear Handle Mount for increased user comfort in down drilling applications• Factory Set Clutch reduces sudden, high torque reactions if bit jams• Rubber Grip helps reduce the level of vibration felt by the user• Lightweight 13.5 lbs

Item # 10002673

1-1/8” sds Plus roto Hammer• Using carbon brushes helps to make the service life last longer• 0-1,100RPM & 0-4,500 BPM for demanding applications• Recessed lock-on button for continuous use• Includes: side handle, depth gauge and plastic carrying case

Item # 26404940

1-9/16” sds maX rotary Hammer• Built-in torque limiting clutch disengages if bit jams• Powerful 10 AMP motor delivers for the most demanding applications• One-touch sliding chuck for quick & easy bit changes• Dual mode operation Rotation with hammering and Hammering only make this tool• Soft grip helps reduce the level of vibration felt by the end-user

Item # 26404894

Roto Hammers


Power Tools

44 858-332-2133

12 lB. sds maX demolition Hammer• SHOCKS - Active Vibration Control® Reduces vibration felt by the user at the handles . A Perform and Protect feature.• 9.5 ft-lbs of impact provides powerful chipping and faster destruction rates• 13.5 Amp motor maximum performance and overload protection• Electronic variable speed allows the user to control the speed of chipping and impact energy

Item # 10007801

sds maX demo Hammer• SHOCKS - Active Vibration Control® Reduces vibration felt by the user at the handles . A Perform and Protect feature.• 15 ft-lbs of impact energy provides maximum performance in chipping applications• 15 Amp motor provides maximum overload protection & power• Lock-on slide switch provides increased user comfort in extended use applications• Modular design allows easy access to switch, motor, cordset, brushes and gear case for ease of service

Item # 10007802

21 lB sds maX demolition Hammer• 14.0 Amp motor provides high performance and overload protection• Non-air pumping beatpiece eliminates masonry dust from entering the unit extending tool and seal life• Spring-loaded dust seals ensure longer tool life• Large on/off rocker switch allows for easy single finger operation• One-step chisel rotation (12 positions) allows the user to quickly and accurately adjust the chisel, not the tool• Large rear rubber handle allows easy operation with 1 or 2 hands• Variable position side handle allows 360° rotation and 150° adjustment for ease of use• In-line design for easy operation of tool in horizontal or vertical applications• SDS max tool holder with rubber dampers absorbs energy providing longer life

Item # 10006919

20 lB demolition Hammer• Hard hitting (25.5J), with less weight (20.3); ideal for horizontal work• Electronic Speed Control Automatically applies additional power to the motor to maintain consistent speed under load for the most challenging jobs• Soft Start Suppresses start-up reaction for more control and better accuracy• Variable Speed variable speed control dial that enables user to match the speed to the application for greater versatility• 12 bit angles settings - Bit can be set at 12 different positions for operating convenience

Item # 26402154

Demo & Chipping Hammers


Pow

er T

ools

45858-332-2133

1-3/4” sds maX comBination Hammer• SHOCKS - Active Vibration Control® Reduces vibration felt by the user at the handles A Perform and Protect feature.• 2-Stage clutch provides maximum control in bind up situations. A Perform and Protect feature.• 9.5 ft-lbs. of Impact Energy provides fast drilling and powerful chipping• 13.5 Amp high-performance motor provides high performance & overload protection; 210-415 rpm; 1430-2840 bpm• Electronic Variable Speed Dial allows the user to control the the speed of drilling or chipping while maintaining speed under load• Rear handle mount increases user comfort in down-drilling applications• Trigger lock-on reduces user fatigue while chipping• Electronic Soft Start provides the user more control when the trigger is pulled.• Chisel rotation mode allows the user to turn the chisel without having to remove it.

Item # 10005658

Pavement BreaKer w/ cart and steel

Item # 26407841

• SHOCKS - Active Vibration Control® Reduces vibration felt by the user at the handles . A Perform and Protect feature.• 61 Ft-lbs impact energy provides maximum performance• 15 amp motor provides maximum power and overload protection• Rubber coated handles provide greater comfort and control• Electronic soft start increases productivity by reducing bit walking• Hammer Truck provides easy transportation of pavement breaker

1-3/4” avt roto Hammer drill• Makita’s Anti-Vibration Technology incorporates a counterbalance system that reduces vibration for unmatched comfort• Powerful 13.5 AMP motor; 1,250-2,750 BPM to handle the most demanding jobs• Built-in Torque Limiter ensures stable torque control• L.E.D. power light indicates switch failure or cord breakage; L.E.D. service light indicates carbon brushes need to be replaced.

Item # 26404910

Demo & Chipping Hammers

70 lB BreaKer Hammer w/ cart and steel• Makita’s Anti-Vibration Technology incorporates a Counterbalance system reduces vibration to only 8 m/s2 for unmatched comfort• Powerful 15 AMP motor; efficient 1,100 BPM to tackle the most demanding jobs• Lowest noise level in its class at only 107dB• Warning lamp indicates trouble with the cord; AC/DC switch for use with alternative power sources• 1 year warranty on tool

Item # 39204718


Power Tools

46 858-332-2133

sHocKwave™ driver Bit set 29Pc

Item # 10803520

• Geometric design provides the shock absorption• Proprietary steel and heat treat process for maximum strength and durability• Forged tips for maximum grip

15Pc tHunderBolt® BlacK oXide drill Bit set

Item # 10801263

• Thunderbolt drill bits are designed for extreme durability and long life• Bits features a thicker core than a standard drill bit• Parabolic flute form clears chips and debris fast, keeps the bit cool• 135 Split Point tip starts on contact, keeps bit from walking• 3-flat secure grip shank reduces bit slipping in chuck

4Pc forstner Bit set

Item # 10801297

• Used in drilling pocket holes, over lapping holes or holes on the edge of materials. • Fine Kerf Teeth produce accurate and clean holes.• Precision Ground Edges for flat bottom holes.• Includes: (1) 1/4” Forstner Bit, (1) 1/2” Forstner Bit, (1) 5/8” Forstner Bit, (1) 3/4” Forstner Bit

quiK-loK 38-Piece HeX sHanK drillinG and drivinG Bit set

Item # 10800608

• Versatile and durable 38-piece quik-lok bit system• Quik-lok all-hex chuck provides fast and easy accessory changes and fits all 3/8” and 1/2” drill chucks• Screwdriver bits made from premium quality S2 steel for high torque applications• Titanium drill bits for long life and superior performance• Limited lifetime manufacturer’s warranty

21 Pc. screwdrivinG set w/touGHcase

Item # 10000018

• Heavy Duty Magnetic Keeps Bits in Place• Bit Retention System Keeps Bits Secure• Superior Quality

29 Piece drill Bit set w/ case

Item # 91502734

• Jobber Length Drill Bit Set• Split Point 135 Deg• Number of Pieces 29• Fractional Size 1/16 To 7/16 Drill Bits• High Speed Tin Coated• Includes Storage Container

10-Piece eXtractor and Bit set

Item # 10502246

• Designed to remove broken studs, bolts, socket screws and fittings• Aggressive left hand spiral design for extra gripping power• Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor’s grip increases• Extractor size and recommended drill bit size are etched on each tool.• Set includes plastic pouch

Drill Bits & Drivers


Pow

er T

ools

47858-332-2133

coBalt HiGH sPeed steel JoBBer lenGtH drill Bits• Constructed of M-35 5 percent cobalt high speed steel for super abrasive resistance in tough metals• Heavy duty spiral flute design produces faster chip ejection• Shorter cutting lips reduce torque for drilling in high tensile strength materials.• 135-degree split point reduces feed pressure for easier penetration without work hardening

HiGH sPeed steel JoBBer lenGtH drill Bits• Bit is constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistance• For general use in wood, metal, and plastic• Black oxide coating resists corrosion• 3/8” reduced shank fits all 3/8” drills• 135 degree split point ensures a true start and eliminates bit walking

91502763 1/8”91502574 5/32”91502764 3/16”91502765 1/4”91502766 5/16”91502767 3/8”91502768 7/16”91502769 1/2”


BlacK oXide drill Bits• Bit is constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistance• For general use in wood, metal, and plastic• Black oxide coating resists corrosion• 3/8” reduced shank fits all 3/8” drills• 135 degree split point ensures a true start and eliminates bit walking

Brad Point Bits• Brad point tip provides accurate positioning for starting the hole• Bit is precision ground for use in furniture making, doweling, cabinetry, and other wood working applications where an exact hole size is required• Spur cutting edges reduce splintering and ensure a smooth, clean hole• Wide flutes provide a fast, continuous flow of chips

10801290 1/8”10801291 3/16”10801292 1/4”10801293 5/16”10801294 3/8”10801295 7/16”10801296 1/2”

Item No. DeSCRIPtIoN 10002251 7-Pc Percussion Drill Bit Set10004307 1/8” x 3” Masonry Drill Bit10004301 5/32” x 6” Masonry Drill Bit10004306 3/16” x 6” Masonry Drill Bit10004305 1/4” x 6” Masonry Drill Bit10004304 5/16” x 6” Masonry Drill Bit 10004303 3/8” x 6” Masonry Drill Bit10004300 7/16” x 6” Masonry Drill Bit10004302 1/2” x 6” Masonry Drill Bit


masonry drill Bits• 2 Cutter carbide tip maximizes carbide surface contact for longer bit life.• Four flute design cleans debris out for fast, efficient drilling.• Three flats on shank eliminate bit slipping in chuck.

91502778 1/8”91502779 3/16”91502780 1/4”91502781 5/16”91502782 3/8”91502783 7/16”


91502784 1/2”91502785 9/16”91502786 5/8”91502787 3/4”91502788 7/8”91502789 1”


91502770 9/16”91502771 5/8”91503680 11/16”91502772 3/4”91503681 13/16”91502773 7/8”


91503682 15/16”91502774 1”91502775 1-1/4”91502776 1-3/8”91502777 1-1/2”


Drill Bits

installer Bits• Hole in flute makes it easy to pull wire through walls, ceilings, and floors• Specially designed flute quickly clears masonry dust• Heavy duty 118 degree point enters material quickly• Carbide tip cutting edge ideal for use where masonry construction is encountered including brick, mortar joints, and cinder blocks• All bits are 18” long

10502892 1/4” x 18 #2 Installer Bit10502891 3/8” x 18 #2 Installer Bit10502890 1/2” x 18 #2 Installer Bit



Power Tools

48 858-332-2133

aircraft drill Bits

91502797 1/8”91502798 3/16”91502799 1/4”91502800 5/16”91502801 3/8”91502802 7/16”91502803 1/2”


10504196 1/4”10500215 5/16”10500145 3/8”10500214 7/16”10500146 1/2”10500191 9/16”10500147 5/8”10500164 11/16”10500148 3/4”10503349 13/16”10500149 7/8”10500171 15/16”10500155 1”10500151 1-1/8”10500152 1-1/4”10500182 1-3/8”10500153 1-1/2”


sPade Bits (Paddle Bits)• Blue-Groove point and cutting edge for faster chip removal - 4x faster than standard spade bits• Double cutting spurs scribe the outside of the hole reducing breakout• 10% larger shank for added durability• Grooved hex shank prevents slipping in drill chuck or bit extension• Fits all standard quick change chucks

10801269 1”10801270 1-1/8”10801271 1-1/4”10801272 1-3/8”10801273 1-1/2”10801274 1-3/4”10801275 2”10801276 2-1/8”10801277 2-1/4”10801278 2-9/16”10801279 Service Kit


self feed Bits• 7/16 in. hex shank• Removable and replaceable feed screw• Cutting edges can be resharpened• In clamshell packaging

forstner Bit• Fine Kerf Teeth produce accurate and clean holes• Precision Ground Edges for flat bottom holes

10801284 3/8”10801285 1/2”10801286 5/8”10801287 3/4”10801288 1”10801289 1-3/8”


universal quiK-loK eXtensions• Exclusive Quik-Lok accepts all 7/16in shanks• Impact Rated, making this the most versatile extension on the market• Quick change of bits, no tools required

10801280 5-1/2”10801281 12”10801282 18”10801283 24”


• Ideal for drilling in hard-to-reach areas and for running wires and cable• Bit is constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistance• For general use in wood, metal, and plastic• Black oxide coating resists corrosion• 135 degree split point ensures a true start and eliminates bit walking

91502790 3/16”91502791 5/16”91502792 3/8”91502793 1/2”91502794 5/8”91502795 3/4”91502796 1”


HiGH sPeed steel countersinKsHigh Speed Steel Countersinks are milled and precision ground to 82’ for countersinking into most machinable materials, including iron, steel, soft metals, plastic or wood

Drill Bits & Cutting Tools


Pow

er T

ools

49858-332-2133

Item # 26803685

steP Bit

Item # 10500061

3 Piece steP Bit set• Single-flute cutting edge for greater control through steps• 3 Flatted shank prevents slipping in drill chuck• Non-skid self-starting tip eliminates skidding and the need for center punching.• Features an easy-to-sharpen, self-starting tip that eliminates skidding• Full lifetime warranty

Item # 10502244

6 Piece screw eXtractor set• Designed to remove broken studs, bolts, socket screws and fittings• Aggressive left hand spiral design for extra gripping power• Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor’s grip increases• Extractor size and recommended drill bit size are etched on each tool.• High speed steel drill bit ensures fast, clean drilling

Item # 10502246

10 Piece screw eXtractor set• Designed to remove broken studs, bolts, socket screws and fittings• Aggressive left hand spiral design for extra gripping power• Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor’s grip increases• Extractor size and recommended drill bit size are etched on each tool.• Set includes plastic pouch

Item # 38002719

taP and die set• 40 piece set covers taps and dies from No. 4 to 1/2”• Ratcheting “T” Wrench provides a 5 degree ratcheting arc for tapping engine blocks• Replaces need for slower existing tap and die wrenches• Reversible lever allows quick change from forward to reverse eliminates hand over hand turning• Twist Lock Guide System keeps dies centered while cutting threads

Item # 91503711

carBide Burr setCarbide Burr Green Kit (5 pc tool set) 20158GR consists of CTI’s most popular burrs. Available in standard cut and aluma cut. Tool kits shown are double cut. Packaged conveniently to store in your tool box! Private labeling available for displaying in your retail point of sale.

• Excellent tool for electrical contractors, sheetmetal workers and auto mechanics. • Ideal for drilling repetitive holes in steel, copper, brass, plastic, plexiglas and other thin materials. • Made of high speed steel with double fluted ground cutting edge for long life. • 1/4” to 7/8” by 16ths, 3/8” Shank

Cutting Tools


Power Tools

50 858-332-2133

Item # 26801486

8 Piece Bi-metal Hole saw Kit• Kits provide frequently used hole saw sizes for the electrical trades along with arbors and pilot drills• High Speed Steel Cutting Edges• Packed in Tough Injection Molded • Plastic or Steel Cases• Bimetal Hole Saw Applications:• Wood & Nail Embedded Wood• Steel and Other Machinable Metals• Plastic• Carbide tipped hole saw applications: • Fiberglass• Drywall• Aluminum• Coutertop Material• 1-1/2˝ Cutting Depth Clears 2x4s in One Pass

13 Piece maintenance Kit• Backer, cutting edge and cap work together to provide faster, longer-lasting cutting action• Positive rake teeth clear chips better for longer life and easier cutting• Bi-metal design bonds M3 cutting edge to fatigue resistant backer• Teeth stay sharper and make smoother cuts• Includes 9 Hole Saws, 3 Arbors, 1 Extension

Item # 26801487

13 Piece Bi-metal Hole saw Kit• Backer, cutting edge and cap work together to provide faster, longer-lasting cutting action• Positive rake teeth clear chips better for longer life and easier cutting• Bi-metal design bonds M3 cutting edge to fatigue resistant backer• Teeth stay sharper and make smoother cuts• Includes 10 Hole Saws, 3 Arbors

Item # 26800950

19 Piece Bi-metal Hole saw Kit

Item # 26801488

8 Piece PlumBer’s Hole saw Kit• Backer, cutting edge and cap work together to provide faster, longer-lasting cutting action• Positive rake teeth clear chips better for longer life and easier cutting• Bi-metal design bonds M3 cutting edge to fatigue resistant backer• Teeth stay sharper and make smoother cuts• Includes 6 Hole Saws, 2 Arbors

Item # 26801489

• Backer, cutting edge and cap work together to provide faster, longer-lasting cutting action• Positive rake teeth clear chips better for longer life and easier cutting• Bi-metal design bonds M3 cutting edge to fatigue resistant backer• Teeth stay sharper and make smoother cuts• Includes 15 Hole Saws, 3 Arbors, 1 Extension

8 Piece locKsmitH Kit• Backer, cutting edge and cap work together to provide faster, longer-lasting cutting action• Positive rake teeth clear chips better for longer life and easier cutting• Bi-metal design bonds M3 cutting edge to fatigue resistant backer• Teeth stay sharper and make smoother cuts• Includes 6 Hole Saws and M24, M45P Arbors

Item # 26801513

29 Pc electricians Hole saw Kit• Bi-metal hole saws have smooth cutting action with minimum vibration• Carbide tipped hole saws offer the highest wear resistance possible and longer life cutting abrasive materials• Arbors are both 1/4” hex with 3-1/4” pilot drills. One has 1/2-20 thread size and the other is 5/8-18 thread size• Extra pilot drills included with kit

Item # 26802149

Hole Saw Kits


Pow

er T

ools

51858-332-2133

Bi-metal Hole saws• Master Cobalt® Bi-Metal Hole Saws• Premium line of professional quality bi-metal hole saws feature an M3 high-speed steel cutting edge, electron beam welded to a tough steel backer. Caps stand up to abuse and punishment, yet are lighter and easier to use than those of competitors. Cutting depth is 1-1/2” (38mm). Arbor required.

diamond Grit Hole sawsBenefits:• faster cutting and more holes in less time• Low wear and long life• Thin kerf

Features:• Made with industrial diamond grit• Slug ejection slots• Thin kerf

Hole Saws

26801503 Fits 9/16 through 1-3/16 Hole Saws26801504 Fits 9/16 through 1-3/16 Hole Saws26801502 Fits 1-1/4 through 6 Hole Saws


Hole saw arBorsDurable, heavy-duty carbon steel arbors come complete with pilot drills. Adapt Morse hole saws to any power drill used by professionals.

carBide tiP Hole sawscarBide Grit Hole saws

26801490 3/4”26801491 7/8”26801492 1”26801493 1-1/8”26801494 1-1/4”26801495 1-3/8”26801496 1-1/2”26801497 1-3/4”26801498 2”26802933 2-1/8”


26801499 2-1/4”26801500 2-1/2”26801501 3”26803263 3-1/2”26803264 3-5/8”26803265 4”26803266 4-1/2”26803267 4-3/4”26803268 5”26803269 6”


26806395 3/16”26806396 1/4”26806397 5/16”26806398 3/8”26806399 1/2”26806400 5/8”26806401 3/4”26806405 7/8”


26806402 1”26806404 1-1/8”26806406 1-1/4”26806403 1-3/8”26806406 1-1/4”26806407 2”26806408 2-1/2”26806394 Arbor Pilot


10800287 3/4”10800288 7/8”10800289 1”10800290 1-1/8”10800293 1-1/4”


10800295 1-3/8”10800303 1-3/4”10800306 2”10800309 2-1/4”10800310 2-1/2”


Designed for cutting abrasive materials such as brick, block, cement board, fiberglass and tile. Use a carbide tipped pilot bit when cutting ceramic tile, brick, and other abrasive materials.

Provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flakeboard and plywood. Use a carbide tipped pilot bit when cutting ceramic tile, brick, and other abrasive materials.

10800277 3-1/8”10800282 4-3/8”10800283 5-3/8”10800284 6-3/8”10800285 6-5/8”10800286 6-7/8”


10800312 5/8”10800313 3/4”10800335 7/8”10800341 1”10800344 1-1/8”10800347 1-1/4”10800348 1-3/8”10800349 1-1/2”10800353 1-5/8”10800374 1-3/4”

Item No. DeSC.

10800376 1-7/8”10800412 2”10800414 2-1/8”10800419 2-1/4”10800421 2-3/8”10804530 2-1/2”10800457 2-5/8”10800458 2-3/4”10800459 2-7/8”10800460 3”

Item No. DeSC.

10800461 3-1/4”10800462 3-1/2”10800463 3-5/8”10800469 3-3/4”10800472 4”10800697 4-1/4”10800712 4-1/2”10800719 5”10800738 6”

Item No. DeSC.

recessed liGHt Hole sawManufactured using carbide grit for cutting through drywall, plaster, acoustical tile, wood and stucco with mesh. Made with a continual rim, these saws won’t tear material and will leave a clean finish.


Power Tools

52 858-332-2133

7-1/4” maratHon circular saw Blade

Item # 10500094

7-1/4” circular saw Blade• Tougher tungsten carbide stays sharper longer• Specially formulated anti-stick coating minimizes friction and gum-up for smoother cuts• Thin kerf for fast, smooth cutting action• Ribbed heat vents allow blade to run cooler, reducing blade flexing and binding• All blades feature 5/8” arbor with diamond knock-out• 24 Tooth

Item # 10001134

6-1/2” maratHon circular saw Blade• Ultra thin kerf for more cuts per charge • Face ground carbide teeth for fast, clean cuts • Aggressive hook angle for fast cuts • Construction carbide teeth for longer life • 24 Tooth

Item # 10500116

7-1/4” circular saw Blade• Tougher tungsten carbide stays sharper longer• Specially formulated anti-stick coating minimizes friction and gum- up for smoother cuts• Thin kerf for fast, smooth cutting action• Ribbed heat vents allow blade to run cooler, reducing blade flexing and binding• All blades feature 5/8” arbor with diamond knock-out• 36 Tooth

Item # 10004893

5-3/8” cordless trim saw Blade

Item # 34802119

5-1/2” circlular saw Blade• Alternate Top Bevel (ATB) Grind Positive Hook blade• Fits Makita 5-1/2” saw and others• 30 Tooth

Item # 32401756

7-1/4” carBide tiPPed circular saw Blade• 7-1/4D 60 teeth• Ultra fine finishing blade• Ideal for cross cutting oak, pine, melamine, veneer, plywood, and delicate molding• Laser cut stabilizer vents - traps noise and vibration and also stabilizes blade• 60 Tooth

Item # 34802665

8-1/4” tootH fine finisHinG miter Blade• Features Freud’s TiCo Hi-Density Carbide with Titanium for long life and a flawless finish• Super thin laser cut kerf gives extremely fast, durable, and clean cuts• Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp• Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up• Tri-Metal Brazing for impact-resistant tips• 60 Tooth

Item # 34802468

• The Fastest Framing Blade Ever!• Every other tooth is thinner for faster cuts • New heat vent/expansion slot design reduces vibration for longer life and straighter cuts • Construction grade carbide teeth for longer life • Reinforced shoulder for added durability • 24 Tooth

• Stabilizer vents trap noise and vibration keeping it cool and reducing blade warp• Heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight• Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life• Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability• 36 Tooth

Saw Blades


Pow

er T

ools

53858-332-2133

10” circular saw Blade• 10-inch 80T ultra fine finish cut-off blade with a laser-cut 5/8-inch arbor• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp• Heat expansion slots let blade expand due to heat build-up; durable micrograin titanium carbide• Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability• 80 Tooth

34802282 10”, 24T34802281 10”, 50T34802280 10”, 80T


14” metal cuttinG saw Blade• 12% titanium carbide provides long life in metal cutting• Modified ATB tooth geometry provides clean, burr-free cuts• Tri-foil braze absorbs stress, making the tip stronger• Expansion slots dissipate heat which extends blade life• 60 Tooth

Item # 10006134

7-1/4” steel cuttinG saw Blade• Precision sharpened teeth for fast, smooth cuts and longer life• Blade coating prevents rust and reduces friction• Thicker body provides increased durability in heavy-duty applications• Fully hardened steel body prevents blade warping and binding• 90 Tooth

Item # 10006134

6-3/4” metal cuttinG saw Blade• Specially formulated titanium carbide teeth for long life in metal cutting• Modified alternate top grind for clean, smooth cuts• Thin kerf for fast and smooth cutting action• High-backed shoulder for increased strength behind each tip• 40 Tooth

Item # 10006134

reciProcatinG saw Blade • Smoother, more accurate cuts• Conventional shanks to fit all standard reciprocating saws• Wide variety of sizes for almost every professional need• Cobalt edge welded to high strength steel backer for greater wear resistance and longer life

JiG saw BladeNo other company makes as many jig saw blades for as many applications as Bosch. That’s more than six billion blades to date. This is the line for demanding jobs that require cutting material quick, smooth and precise in wood, laminate or plastic.

Saw Blades

11202235 T318A T Shank 5-1/4” 2411201549 T119BO T Shank 3” 1211201550 T123X3 T Shank 4” 5111201548 T118EF T Shank 3” 1811201543 T118BF T Shank 3” 1411201598 T234X3 T Shank 4-1/2” 8-1211201597 T144D T Shank 4” 611203037 T118AHM3 T Shank 3” 2411201599 T345XF T Shank 5-1/4” 5-1011201601 T308B T Shank 4-1/2” 1211201542 T118AF T Shank 3” 2411201072 T101BF T Shank 4” 1011201757 T218A T Shank 3” 17-2411201541 T111C T Shank 4” 811201540 T101BR T Shank 4” 1011201539 T101B T Shank 4” 1011201538 T101AO T Shank 3” 2011201605 U118BF U Shank 2-3/4” 1411201607 U19BO U Shank 2-3/4” 1211201606 U118EF U Shank 2-3/4” 1811201604 U118AF U Shank 2-3/4” 2411201603 U101BR U Shank 3-1/8” 1411201602 U101BR U Shank 3-5/8” 1011201610 U345XF3 U Shank 5-1/4” 5-1011201608 U111C U Shank 3-5/8” 811201609 U502A5 U Shank 5 Piece Assortment Pack

Item No. BoSCh # ShaNk LeNgth tPI

26804155 6” 6 526801789 6” 6 5026804158 6” 10 526801482 6” 14 526801476 6” 18 526801786 6” 18 5026801483 6” 24 526802717 6” 24 5026804157 8” 10 526801477 8” 18 526804156 9” 6 526801790 9” 6 5026801485 9” 6 326803557 9” 18 526801787 9” 18 5026804159 9” 18 526801481 12” 6 526801791 12” 6 5026801478 12” 18 526801788 12” 18 50

Item No. LeNgth tPI Pkg qty


Power Tools

54 858-332-2133

42004483 4-1/2 1/4 7/8 27 13,30042004482 4-1/2 1/4 5/8-11 27 13,30042004485 7 1/4 7/8 27 8,60042004484 7 1/4 5/8-11 27 8,60042004487 9 1/4 7/8 27 6,60042004486 9 1/4 5/8-11 27 6,600

Item No. DIameteR thICkNeSS aRBoR tyPe RPm

GrindinG wHeels for metalA24R Fast Cut: Aluminum Oxide Grain• Use for fast metal grinding.• Premium Grain.

42004499 4-1/2 1/4 7/8 27 13,30042004498 4-1/2 1/4 5/8-11 27 13,30042004501 7 1/4 7/8 27 8,60042004500 7 1/4 5/8-11 27 8,60042004503 9 1/4 7/8 27 6,60042004502 9 1/4 5/8-11 27 6,600

Item No. DIameteR thICkNeSS aRBoR tyPe RPm

GrindinG wHeel for masonry• Depressed Center Wheels: Fast Cut C24R: Silicon Carbide Grain – Concrete• Silicon Carbide grain and R-grade bond for easy working on masonry, concrete, and stone.

reinforced cut-off wHeel for metalQuickie-Cut Reinforced Cut-Off Wheel• ZA-36-T-Rigid: Thicker (.045), rigid wheel design for fast cutting and longer life.

42004489 4-1/2 .045 7/8 1 13,300 Item No. DIameteR thICkNeSS aRBoR tyPe RPm

42004491 7” 3/32” 5/8” w/ KO 1 8,600 Item No. DIameteR thICkNeSS aRBoR tyPe RPm

7” circular saw cut-off wHeel• A: Aluminum Oxide for Cutting Metal & Steel• .045 wheels extra thin for faster cutting with less resistance. • A24-R-BF

Abrasive Wheels


Pow

er T

ools

55858-332-2133

42004493 12 1/8 20mm 1 6,400 Gas Saw Metal A24R-BF Aluminum Oxide 42004494 12 1/8 1 1 6,400 Gas Saw Metal A24R-BF Aluminum Oxide 42004496 14 1/8 1 1 5,500 Gas Saw Metal A24R-BF Aluminum Oxide 42004495 14 1/8 20mm 1 5,500 Gas Saw Metal A24R-BF Aluminum Oxide 42004504 14 1/8 20mm 1 5,500 Gas Saw Masonry C24-R-BF Silicon Carbide 42004505 14 1/8 1 1 5,500 Gas Saw Masonry C24-R-BF Silicon Carbide 42004492 14 7/64 1 1 4,400 Chop Saw Metal A36S-BF Aluminum Oxide

Item No. DIameteR thICkNeSS aRBoR tyPe RPm FoR uSe oN FoR CuttINg SPeC mateRIaL

cut off / cHoP saw wHeels

6” crimPed cuP wHeel• Utilizes an internal holding plate to secure brush bristles• Made of carbon steel• 5/8-11 thread

Item # 36803937

Abrasive Wheels

Item # 42003835

4” strinGer wHeel BrusHTightly twisted wire knots easily reach into narrow or recessed areas for quick material removal.

• Electronically Balanced. All 12-14” wheels are automatically balanced during manufacturing. All 12-14” wheels are guaranteed to be less than 3 and 3.5 grams out of balance. Wheels are safe, cause less vibration and are more consistent.• Uses heavy duty fiberglass reinforcement, so our 12-14” high speed wheels meet speed specifications for all machines on the market.• Premium 14” A24R, A24T, AC & 16” wheels are triple reinforced (TR) to provide extra safety.


Power Tools

56 858-332-2133

sds Plus BitsSDS-Plus® Carbide Drill Bits are designed for use in a rotary hammer equipped with an SDS (slotted drive shaft) type chuck. The bits are manufactured to conform with ANSI Standard B212.15 and can be used to drill in concrete, block, brick, and soft stone.

26900905 5/32 x 6 x 426901988 3/16 x 4 x 226901989 3/16 x 6 x 426902916 1/4 x 6 x 426901990 1/4 x 8 x 626902006 1/4 x 11 x 926900952 3/8 x 6 x 426900908 3/8 x 10-1/2 x 7-1/226902880 3/8 x 12 x 1026900953 1/2 x 6 x 426900954 1/2 x 10 x 826902007 1/2 x 12 x 1026904731 1/2 x 18 x 1626903748 1/2 x 24 x 2226903095 5/8 x 8 x 626902008 5/8 x 12 x 1026902009 5/8 x 18 x 1626902010 3/4 x 8 x 626902011 3/4 x 12 x 1026902012 3/4 x 18 x 16


steel wire BrusH• For use in cleaning holes that have been drilled in concrete• Recommended to prepare concrete holes for epoxy

26902070 5/32 x 6-1/4 x 4 25 pack26902551 3/16 x 6 x 4 25 pack26902015 1/4 x 4 x 2 25 pack26902016 1/4 x 6-1/4 x 4 25 pack26902017 3/8 x 6-1/4 x 4 25 pack26902018 1/2 x 6-1/4 x 4 15 pack26902019 5/8 x 8 x 6 15 pack

Item No. DeSCRIPtIoN qty

26903538 3/8” Wire Brush26903539 1/2” Wire Brush26903540 5/8” Wire Brush26903537 Adapter for bottle brush


sds maX BitsSDS-Max® Carbide Drill Bits are designed for use in a rotary hammer equipped with a SDS-Max® type chuck. The bits are manufactured to conform with ANSI Standard B212.15 and can be used to drill in concrete, block, brick, and soft stone.

26902020 1/2 x 13 x 826902021 1/2 x 21 x 1626902022 5/8 x 13 x 826902023 5/8 x 21 x 1626902024 3/4 x 13 x 826902025 3/4 x 21 x 1626902026 7/8 x 13 x 826902027 7/8 x 21 x 1626902028 1 x 13 x 7-1/226902029 1 x 21 x 1626904393 1-1/8 x 21 x 17-1/226904394 1-1/8 x 23 x 1826904395 1-1/4 x 36 x 3126904396 1-3/8 x 23 x 1826904397 1-1/2 x 23 x 18


sds maX cHiPPinG tools• For use with SDS Max Hammers

90304782 Point90304783 Chisel90304784 Chisel90304821 Bushing Head


sds Plus adaPter• Used to convert SDS Max tools to SDS Plus tools

Item # 26903749

reBar eater Bits• High-quality carbide for long drilling life• Tapered body design provides less weight for smoother drilling• Relief hole dissipates heat and allows for slug removal

11201518 3/811201519 1/211201520 9/1611201521 5/811201522 3/4


11201523 7/811201524 111201525 1-1/811201526 1-1/411201527 1-1/2


SDS Bits


Pow

er T

ools

57858-332-2133

Blade roller• For worm drive saws• Increase cutting speed• Make straight cuts• Easily increase control and accuracy

sidewinder Blade roller• No tools required• For use on wood, concrete, marble, and much more• Dramatically increases cutting speed and control• Greater versatility and efficiency• Fits most popular direct drive circular saws

• For 4” and 4-1/2” grinders• Installs in seconds• Great for crackchasing and tuck pointing• Adjustable depth of cut• Non-marking wheels

water Kit• Water cools and lubricates diamond blade, thus extending blade life• Helps control dust and particles• GFCI included for operator safety• Attaches to saw quickly and easily, does not alter saw

vacu Guard• Adapts easily to a variety of angle grinders.• Exclusive flexible diaphragm.• Special Delrin sliding strip.• Heavy Duty Aluminum Casting.• Adjustable Hub Adapters.

quiKattacH vacuum adaPter

saw vac

Item # 21401040

Item # 21401037

Item # 21401038

Item # 21401039

Item # 21401032

Item # 21401041

Grinder caddy Blade roller

• Pearl Abrasives’s QuikAttach vacuum adapter allows attachment of a vacuum to your 4” or 4-1/2” grinder• Installs in seconds• Easy to use• No tools required• QuikAttach will work with any vacuum, but for optimum efficiency use a vacuum rated at or above 11.5 amps (1.75hp) or 110 cfm• Non-marking wheels

• Perfect When Cutting: Concrete, Fiberglass, Wood• Made Of Heavy Duty Stainless Steel For Durability• Easy To Assemble, Installs In Minutes!• Does Not Obstruct Operator’s View.• Works Well With Your Blade Roller From Pearl Abrasive• Vacuum Requirements: Sawvac™ Will Work With Any Vacuum, But For Optimum Efficiency Use A Vacuum Rated At Or Above 11.5 Amps (1.75 Continuous Hp) Or 110 Cfm.• Easy To Assemble, Installs In Minutes!

21401035 4-1/2”21401036 7”


Grinder & Saw Accessories


Power Tools

58 858-332-2133

4” X 0.7” small diamond Blade• Basic quality and life• Dry cutting blades for electric saws and right angle grinders• Dry blades can also be used with water for cooling• E2D bond specification for hard materials like concrete• 4-Inch

Item # 35301856

4” X 0.80” turBo diamond Blade• Basic quality• Fast cutting• Good cutting value• Serrated segment design• Less surface to surface contact

Item # 35301858

4.5”X 0.8” turBo deluXe cut dry Blade

Item # 35301859

• High quality blades with turbo design for fast cutting• For use on high speed and masonry saws• Dry products can be used with water• Good for cutting in general purpose materials

4-1/2” Premium diamond Blade

Item # 39204826

• Use the TSD-T blade for fast, smooth cutting of a variety of materials, including stone, tile, brick, concrete and masonry• This blade gives turbo performance at an affordable price• Premium• Dry or Wet Cutting Continous Rim

7” Premium diamond Blade

Item # 39204827

• Use the TSD-T blade for fast, smooth cutting of a variety of materials, including stone, tile, brick, concrete and masonry• This blade gives turbo performance at an affordable price• Premium• Dry or Wet Cutting Continous Rim

4” X 5/8-11 cuP Grinder

35301019 4” x 5/8-11 35301018 7” x 5/8-11


• Basic quality diamond• General grinding and removal• For use on right angle grinders• Single row• Economical grinding value

Diamond Blades


Pow

er T

ools

59858-332-2133

12”X0.125” turBo diamond Blade• Basic quality and life• Dry cutting blades for electric saws and right angle grinders• Dry blades can also be used with water for cooling• E2D bond specification for hard materials like concrete• 4-Inch

Item # 35301860

14” value diamond Blade• Segmented Diamond Blade for Concrete, Brick, Block, Marble, Refractory Material and Natural Stone• Fast, aggressive cutting speed. Long blade life

Item # 21401141

14”X0.125” HiGH sPeed Blade• Good cutting value• General purpose cutting for Green concrete, asphalt, brick, and block• Dry or wet cutting• Diamond depth of .394”• Segment height of .472”

Item # 35302209

14” wet-cured concrete Blade• Heavy-Duty Wet-Cured Concrete Diamond Blade• 14” x 0.125”• 1” Arbor• 0.250” Diamond Depth• For Use with Walk-Behind Saws

Item # 35302242

oranGe wet core Bit• High quality core bit for dependable drilling• “HOL” bond specification: for general purpose, long life• (1.250”-7) threaded hub• 0.287 In. segment height and 13 In. drilling depth

35300951 2”35300920 3”35300949 4”


14” 5 HP Gas cut off saw• Suitable for concrete/pile cutting, asphalt/masonry/landscape work• X-torq engine provides more power, higher torque, lowers fuel consumption by 20%.• New active air filtration system - 1 year no filter service required• Anti-vibration system reduces handle vibration for comfortable use• DuraStarterTM also includes a starter cord with greatly increased durability.

Item # 39204718

Diamond Blades & Cut-Off Saws


Power Tools

60 858-332-2133

3-1/2” round-Head framinG nailer Kit• Uses 20° to 22° nails, 2” to 3-1/2” x .113” to .148” plastic collated round-head framing nails• Power to drive nails (up to 3-1/2” x .131”) into engineered lumber• Compact body design for better balance and style• Consistent power on every shot with internal piston catch mechanism• Selectable trigger - restrictive or contact actuation mode• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads• Better balance with in-line hard coat anodized magazine• Bypass nail pusher allows for quick reloading• Nail lockout mechanism alerts operator to reload tool and prolongs driver blade life• Tool-free adjustable exhaust• Removable non-marring nose tip with on tool storage

11104091 Framing Nailer 42605276 Bright Finish 2-3/8” x .113” , 1000 / bx42605278 Galvanized 2-3/8” x .113” , 1000 / bx42605277 Bright Finish 3-1/4” x .131” , 1000 / bx42605279 Galvanized 3-1/4” x .131” , 1000 / bx


16 Ga. 2-1/2” finisH nailer Kit• Maintenance-free motor designed to deliver long life•Internal piston catch for consistent max power on every shot•Tool-free depth-of-drive adjustment with detents for proper setting of nail heads•Drives 16 ga. “FN” style finish nails from 1” to 2-1/2” length•Tool-free jam release mechanism for easy nail removal•Tool-free adjustable exhaust channels contaminants away from the user•Magazine can be loaded as a rear load & lock style•Sequential style trigger with lock off switch•Removable non-marring nose tip•Contact safety located behind driver guide for better visibility•Adjustable belt hook•Integrated rubber grip for improved comfort• Special hardened driver blade• Strong, lightweight, die-cast aluminum housing

11104818 Finish Nailer 42605249 Finish Nail 16 GA x 1” , 2500 / bx42605250 Finish Nail 16 GA x 1-1/4” , 2500 / bx42605251 Finish Nail 16 GA x 1-1/2” , 2500 / bx42605252 Finish Nail 16 GA x 1-3/4” , 2500/bx42605253 Finish Nail 16 GA x 2” , 2500 / bx42605254 Finish Nail 16 GA x 2-1/4” , 2500 / bx42605255 Finish Nail 16 GA x 2-1/2” , 2500 / bx


18 Ga. 2” Brad nailer Kit• Long life maintenance-free motor to keep from staining the work surface• Internal piston catch for consistent max power on every shot• Rear exhaust to keep contaminants away from work• Drives 18 ga. nails from 5/8” to 2” length• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads• Tool-free jam release mechanism for easy nail removal• Sequential style trigger with lock off switch• Removable non-marring nose tip with on tool storage• Contact safety located behind driver guide for better visibility• Adjustable belt hook• Integrated rubber grip for improved comfort• Low nail reload indicator• Special hardened driver blade• Strong, lightweight, die-cast aluminum housing

11104816 Brad Nailer 42605256 Brad Nail, 18 GA x 5/8”, 2500 / bx42605257 Brad Nail, 18GA x 3/4”, 2500 / bx42605258 Brad Nail, 18 GA x 1” , 2500 / bx42605259 Brad Nail, 18 GA x 1-1/4” , 2500 / bx42605260 Brad Nail, 18 GA x 1-1/2” , 2500 / bx42605261 Brad Nail, 18 GA x 1-3/4” , 2500 / bx42605262 Brad Nail, 18 GA x 2” , 2500 / bx


18 Ga. 1-1/2” narrow crown staPler Kit• Long life maintenance-free motor to keep from staining the work surface• Internal piston catch for consistent max power on every shot• Rear exhaust to keep contaminants away from work• Drives 18 ga. staples with 1/4” crown from 1/2” to 1-1/2” length• Tool-free depth-of-drive adjustment with detents for proper setting of staples• Split nose design for easy removal of jammed staples• Selectable trigger - restrictive or contact actuation mode• Removable non-marring nose tip with on tool storage•Adjustable belt hook• Integrated rubber grip for improved comfort• Low staple reload indicator• Special hardened driver blade• Strong, lightweight, die-cast aluminum housing

11104817 Crown Stapler 42605272 Crown Staple 3/4” , 2500 / bx42605273 Crown Staple 1” , 2500 / bx42605274 Crown Staple 1-1/4” , 2500 / bx42605275 Crown Staple 1-1/2” , 2500 / bx


Nail Guns


Pow

er T

ools

61858-332-2133

PortaBle air comPressor• Oil lubricated pump with cast iron cylinders provides over 1500 running life hours• 4.0 SCFM delivered at 90 PSI pump, 4.0-Gallon tank and 125 max PSI enables more nails to be fired and provides quicker recovery• Dual soft start valves assist in cold weather start up• Universal push-to-connect coupler for ease of operation• Utilizes Emglo’s 50 years of expertise in air compressors

Item # 42204670

3/8” X 50’ air Hose• Features a lightweight flexible kink-resistant design• Hose is ideal for general purpose applications• 300 PSI orange PVC air hose• Hose diameter is 3/8 inch and hose length is 50 feet• 1/4 inch MNPT end fittings• Lighter than Rubber• Oil and Abrasion Resistant• Made in the USA• Ideal for all types of work sites• Fluorescent Orange Color

Item # 90300132

16 oz air tool oilThe Paslode 403720 16-Ounce Warm-Weather Formula Pneu-matic Tool Oil works on all Paslode pneumatic tools. Paslode recommends using 6-20 drops of oil per day of use depending on the work environment to keep your air tools working properly. The 403720 Warm-Weather Formula is only meant for use in temperatures above 32° F.

Item # 90303981

ruBBer air Hose • Designed for industrial, construction, agricultural, etc. use• Quality Design For Extra Strength And Flexibility• Reinforced synthetic rubber tube & cover• Synthetic yarn spiral weave for added flex and strength• Working pressure: 300 PSI (20.68 Bar)• Maximum burst pressure: 1200 PSI (82.74 Bar)• 1/4” MNPT ends with bend restrictors for longer hose life

90307275 1/4” x 50’90307276 3/8” x 50’


Air Tools

Item # 36106839

1/2” imPact wrencH• Pin clutch impact mechanism provides smooth bolt starting and balanced impacts for medium to heavy-duty applications• Lightweight aluminum construction reduces weight• Convenient forward / reverse button for easy-one-handed operation• Built in air regulator provides precise speed control

Item # 36106840

3/4” imPact wrencH• Pin clutch impact mechanism provides smooth bolt starting and balanced impacts for medium to heavy-duty applications• Lightweight aluminum construction reduces weight• Convenient forward / reverse button for easy-one-handed operation• Built in air regulator provides precise speed control


Power Tools

62 858-332-2133

3/4” drive 6 Point standard socKet

1/2” drive 6 Point standard socKet 1/2” drive 6 Point deeP socKet

imPact socKet eXtensions socKet

41708270 1/2” x 5”41708269 1/2” x 10”41708296 3/4” x 7”41708297 3/4” x 10”


41708293 1/2” Female x 3/4” Male41708294 3/4” Female x 1/2” Male41708295 1” Female x 3/4” Male


imPact adaPter universal imPact Joint

41706608 1/2” Drive41708292 3/4” Drive


Impact Tools

41700740 3/8”41700746 7/16”41700752 1/2”41700769 9/16”41700770 5/8”41700775 11/16”41700780 3/4”41700781 13/16”41700782 7/8”


41700796 15/16”41700841 1”41700842 1-1/16”41700843 1-1/8”41700844 1-1/4”41700848 1-5/16”41708303 1-3/8”41700874 1-1/2”


41700876 3/8”41700877 7/16”41700878 1/2”41700879 9/16”41700880 5/8”41700881 11/16”41700882 3/4”41700884 13/16”41700889 7/8”


41700911 15/16”41700940 1”41708298 1-1/16”41708299 1-1/8”41708300 1-1/4”41708301 1-5/16”41708302 1-3/8”41708304 1-1/2”


41708305 3/4”41708306 13/16”41708307 7/8”41708308 15/16”41708309 1”41708310 1-1/16”41708311 1-1/8”41708312 1-3/16”41708313 1-1/4”41708314 1-5/16”41708315 1-3/8”


41708316 1-7/16”41708317 1-1/2”41708318 1-9/16”41708319 1-5/8”41708320 1-11/16”41708321 1-3/4”41708322 1-13/16”41708323 1-7/8”41708324 1-15/16”41708325 2”


power tools

Documents