power tools, equipment & accessories - lowe's proservices
TRANSCRIPT
DEWALT INTRODUCES NANO™ TECHNOLOGY
LIGHTER. STRONGER.
This all-new, revolutionary tool
lineup is lightweight but powerful
and delivers superior cycle life.
NANO™ Technology is available in:
18V – Works with your existing18V tools.
28V – An ultimate power-to-weight performer.
36V – Gives you the power ofcorded without the cord.
WITHOUT ACORD.
WHICH PRODUCT IS RIGHT FOR YOU?
1
2
1 Start with Voltage
36V
28V
18V
14.4V
12V
9.6V
7.2V
Page 8
Page 20
Page 32
Page 34
Page 14
Page 30
Page 34
3
HERE’S HOW TO MAKETHE RIGHT CHOICE.
Start with Voltage. As voltage increases,
you can perform more applications, larger
applications, and do them faster.
Selecting a voltage also includes
determining whether the voltage system
offers all of the tools you need.
Determine the Product Family.
Depending on your prioritization of performance,
ergonomics and value, DEWALT offers up to
three choices of product families.
Compare Feature Sets. DEWALT offers
a variety of options in transmissions, chucks,
batteries, etc. to best satisfy your needs.
2 Determine the Product Family 3 Compare Feature Sets
Top 2 Needs:
Power
Run-Time
Top 2 Needs:
Size/Weight
Performance
Chuck Type
Carrying Case
Handle Comfort
Hammer Feature
Transmission RPMs
Battery Type
Keyless Clamps
BalanceTop 2 Needs:
Size/Weight
Value
BATTERY START
18V CORDLESS SYSTEM
OVER 40TOOLS. ONE SYSTEM.
SYSTEMWEIGHTRECHARGES PERFORMANCE2-9/16" Self-Feed Bit Through One 2x4
SPEED OF DRILLING
Average Speed of Drilling (seconds)4.0 6.0 8.0 10.0 12.0
37%FASTER
DEWALT DC927
Makita LXTBHP451
*Average results based on 50 applications using 6 units
18V NANO BATTERYWORKS WITH ALL
YOUR 18V DEWALT TOOLS.
*DC9180 requires a NANO™ compatible charger DC9310, DC9320, DC9319
*
HEAVY-DUTY 1/2" (13mm) 18V CORDLESSHAMMERDRILL/DRILL/DRIVER KIT
DC927KL
KEY
FEATURES
DC927KL
18V
1/2"
425 unit watts out
3
0-450/0-1,500/0-1,800
0-7,650/0-25,500/0-30,600
22
5.5 lbs
(2) 18V battery packs,1 hour charger,360˚ side handle,heavy-duty kit box
Catalog Number
Volts
Chuck Size
Max Power
# of Speed Settings
Max RPM
Max BPM
# of Clutch Settings
Weight
Includes
SPEC IF ICAT IONS
Patented 3-SpeedAll-Metal TransmissionMaximizes the speed tothe application for optimalperformance
Heavy-Duty 1/2"Self-Tightening ChuckChuck tightens throughoutoperation providing superiorbit gripping torque
Maximum Durabilityand ReliabilityBuilt to withstand thejob-site environment andthe most demandingapplications
18V High PerformanceBattery PackProvides long run-timeand battery life
Anti-Slip Comfort GripProvides increasedcomfort and control
DEWALT Built HighPower, High EfficiencyMotor with Electric BrakeDelivers maximumperformance in all drillingand fastening applications
PERFORMANCE
2-9/16" Self Feed BitThrough One 2x4Average results based on 54 applications using 6 units
SPEED OF DRILLING
Average Speed of Drilling (seconds)
4.0 6.0 8.0 10.0 12.0
DEWALTDC927
MakitaBHP451
7.3
12.0
1.6XFASTER
One2x4
HEAVY-DUTY 1/4" (6.35mm)18V CORDLESS IMPACT DRIVER KIT
DC827KL
Catalog Number
Volts
Chuck Size
Torque
No Load RPM
Max IPM
Weight
Includes
SPEC IF ICAT IONS
OEM Accessory RecessProvides compatibility withmany popular after-marketcomponents for increasedflexibility and productivity
LED Work LightProvides increased visibilityin dark/confined spaces
Variable Speed Reversing SwitchProvides control for both settingand removing fasteners
18V High PerformanceBattery PackProvides long run-timeand battery life
Improved Handle DesignDelivers increased comfort andprovides for less user fatigue
Durable High Speed Motorwith Replaceable BrushesProvides high performance,durability and serviceability
Short LengthCompact to fit into tight spaces
KEY
FEATURES
P ERFORMANCE
3/8" x 3" Lag Bolt into 4x4Pressure Treated LumberAverage results based on 54 applications using 6 units
SPEED
Average Speed (seconds)
5.0 7.0 9.0 11.0 13.0
DEWALTDC827
MakitaBTD140
9.6
12.4
1.3XFASTER
LagScrewin 4x4
DC822KL
18V
1/2" Square withDetent Pin Retention
1,740 in-lbs.
0-2,400
0-2,700
3.7 lbs
(2) 18V battery packs,1 hour charger,
heavy-duty kit box
DC827KL
18V
1/4" Hex,Quick Release
1,330 in-lbs.
0-2,400
0-2,700
3.7 lbs
(2) 18V battery packs,1 hour charger,
heavy-duty kit box
HEAVY-DUTY 18V BATTERY PACKWITH NANO™ TECHNOLOGY
DC9180 DC9310
KEY
FEATURES
HEAVY-DUTY 18V CORDLESS COMBO KIT
KEY
FEATURES
Compatible with DEWALT 18V ToolsDEWALT Exclusive NANO™ PhosphateLithium Ion CellsOffer long battery life & durability: 2,000 recharges
Lightweight Design1.5 lbs - same weight as a DEWALT 12V NiCd battery
No Memory & Virtually No Self-DischargeFor maximum productivity & less downtime
*Requires NANO™Technology compatible charger (DC9310, DC9320 or DC9319)
HEAVY-DUTY 7.2V–18V NiCd/NiMH/Li-Ion 1 HOUR CHARGER
Charges All DEWALT 7.2 – 18VNiCd/NiMH/Li-Ion BatteriesUsers need only one chargerfor multiple cordless products(except Univolt batteries)
DEWALT 3-Stage Charging SystemProvides maximum run-time andextends overall life of the battery
*Also Available:
• DC9180C Heavy-Duty 1 Hour Charger and 18V Battery Packwith NANO™Technology Combo Kit
• DC9320 Heavy-Duty 7.2V–18V NiCd/NiMH/Li-Ion Dual Port 1 Hour Charger
• DC9319 Heavy-Duty 7.2V–18V NiCd/NiMH/Li-Ion 1 Hour Vehicle Charger
DCX4230KIT INCLUDES:Hammerdrill/drill/driverImpact driver(2) 18V battery packs1 hour charger360˚ side handleContractor bag
DCK475LKIT INCLUDES:Hammerdrill/drill/driverImapct driverReciprocating sawFlexible floodlight(2) 18V battery packs1 hour charger360˚ side handleReciprocating saw bladeContractor bag
DCK675LKIT INCLUDES:Hammerdrill/drill/driver 360˚ side handleImpact driver Reciprocating saw bladeReciprocating saw Type 1 and type 27 guardsCut-off tool WrenchHigh-torque impact wrench Backing flangeFlexible floodlight (1) Type 1 wheel(2) 18V battery packs 2-position side handle1 hour charger Contractor bag
OVER 40TOOLS. ONE SYSTEM.
18V CORDLESS SYSTEM
18V NANO BATTERYWORKS WITH ALL
YOUR 18V DEWALT TOOLS.
*DC9180 requires a NANO™ compatible charger DC9310, DC9320, DC9319
*
THE DIFFERENCE IS BUILT IN
DEWALT® SIGNATURE FEATURES
Precise Miter System andMachined Base FenceSupport deliver increasedcutting accuracy
Tall Sliding Fencessupport tall materials andeasily slide out of the wayfor bevel cuts
* Laser System & XPS™Worklight sold separately
Double-Bevel Designallows saw to easily bevelleft and right giving the userthe ability to flip saw not thematerial (degrees of bevelvaries with model)
Laser and L.E.D.Worklight ReadyAccepts DW7187 AdjustableLaser System & DWS7085XPS™ Crosscut PositioningSystem Worklight*
Adjustable StainlessSteel Miter Detent Platewith Positive Stopsdelivers repeatable accuracyand worksite durability(number of positive stopsvaries with model)
Cam Lock Miter Handlewith Detent Overridedelivers quick and accuratemiter angles
Single-Bevel Designallows saw to easily bevel(degrees of bevel varieswith model)
DEWALT Miter Saws Give YouACCURACY. CAPACITY. DURABILITY.
Two Piece Blade Guardfor increased durability
Vertical Capacity withTrim Vertically Nestedranges from 3-1/2" (DW712)to 6-5/8" (DW716, DW718)with choices in between(see product chart)
Positive Bevel Stopsat most common cuttingangles (number of stops andangles varies with model)
DW716 CAPACITY
PORTAB I L I TY
VerticalBASEBOARDagainst fence
6-1/2"
CROWNMOLDINGvertically nested
6-5/8"
44 lbsWEIGHSONLY
Built in carryhandles
Horizontal
2x8
10"MAXIMUMcross cutcapacity withexclusive backfence design
12" BLADE
12" BLADE
12" BLADE
DW718 CAPACITY
PORTAB I L I TY
VerticalBASEBOARDagainst fence
6-1/2"
CROWNMOLDINGvertically nested
6-5/8"
53 lbsWEIGHSONLY
Built in carryhandles
Horizontal
2x14
16"MAXIMUMcross cutcapacity withexclusive backfence design
DW715 CAPACITY
PORTAB I L I TY
VerticalBASEBOARDat left 45˚ miter
6-1/2"
CROWNMOLDINGvertically nested
5-1/4"
42 lbsWEIGHSONLY
Built in carryhandles
SINGLE-BEVELHorizontal
2x8
8"MAXIMUMcross cutcapacity
DW713SINGLE-BEVELCOMPOUND MITER SAW
LASER & L.E.D.WORKLIGHT
READYAccepts DW7187Adjustable Laser System& DWS7085 XPS™Crosscut PositioningSystem Worklight*
* Laser System & XPS™ Worklightsold separately
CAPACITYVerticalBASEBOARDagainst fence
3-1/2"
CROWNMOLDINGvertically nested
4-1/2"
35lbsWEIGHSONLY
Built in carryhandles
Horizontal
2x6
6"MAXIMUMcross cutcapacity
Powerful 15 AmpMotor, 5,000 rpmprovides extendedpower and durability
Left & Right MiterCapacity O˚- 50˚for greater versatility
-3˚– 48˚ BevelCapacityfor increasedproductivity
Tall Sliding Fencesupports tall materials andeasily slides out of the wayfor bevel cuts
Machined BaseFence Supportmaintains fencealignment for durabilityand accuracy
Easy AccessBevel Lockfor quick beveladjustments
10" BLADE
PORTAB I L I TY
Precise Miter System andMachined Base Fence Supportdeliver increased cutting accuracy
ACCURACY & DURABIL ITY
Positive Bevel Stops0˚, 45˚ left
Cam Lock Miter Handle withDetent Override delivers quickand accurate miter angles
Adjustable Stainless Steel MiterDetent Plate with 11 PositiveStops delivers repeatable accuracyand worksite durability
Single-Bevel Design allowssaw to easily bevel left 0° – 48°
DW712 CAPACITY
PORTAB I L I TY
VerticalBASEBOARDagainst fence
3-1/4"
CROWNMOLDINGvertically nested
3-1/2"
43 lbsWEIGHSONLY
Built in carryhandles
Horizontal
2x12
12"MAXIMUMcross cutcapacity
SINGLE-BEVEL SLIDING
DWS7085
Shadow Cut Line delivers fastaccurate alignment
Installs in Minutes
Bright L.E.D. Technologydelivers enhanced visibility
XPS™ Crosscut Positioning System WorklightDesigned Exclusively for the DW713, DW715, DW716 and DW718 DEWALT Miter Saws
On/Off Switch OnPower Supplypermits light use with orwithout blade operation
Separate Power Supplydelivers a convenient light switchlocation without the need for batteries
No adjustmentsrequiredfor accuraterepeatable cuts
Illuminates Work Surfacefor increased productivity
DW7053
Dust Bag(For allDEWALTMiterSaws)
DW7084
CrownStops(For allDEWALTMiterSaws)
DW7080
ExtensionKit(For allDEWALTMiterSaws)
DW7082
VerticalClamp(For allDEWALTMiterSaws)
DW7187
Laser(ForDW713,DW715,DW716,DW718)
DW7232
Miter SawStandMaterialSupportand Stop(ForDW723)
DW7231
Miter SawStandMountingBrackets(ForDW723)
DW723
Heavy-DutyUniversalMiter SawStand(For allDEWALTMiterSaws)
8-1/2" BLADE
MITER
SAWACCESSORIES
KEY
FEATURES
HEAVY-DUTY 3/4'' – 1-3/4''COIL ROOFING NAILER
Nail HeightAdjustment LeverAllows for quickand easy nailheight adjustments
Steel Wear Guards,Anti-Skid PadsProtects tool against abuse andabrasive work surface. Aids inpreventing tool from sliding offa rooftop.
Beveled Nose with Carbide InsertsAids in tool maneuverability andenhanced nose life
Lightweight – 4.9 lbsProvides enhancedmaneuverability andreduced user fatigue
Tool-Free Thumb Wheel Depth AdjustAssists in locating perfect depth setting
D51321
COIL ROOFINGNAILERSMANUFACTURERModelWeightFastener TypeCanister CapacityFastener RangeTool Free Depth AdjustmentIntegrated Nose Door Jam ClearExternal Nail Platform Adj. LeverFeed Piston BiasHinged Feed Piston Cover4-Bolt NoseNose Piece with Carbide InsertsSteel Wear GuardsShingle GuideExhaustOil-lessTrigger Lock-OffOperating Pressure
ROOFING NAILERS
Max®
CN445R5.20.12120
3/4" – 1-3/4"YesNoNo
SpringNoYesYesNoYesFixedNoNo
70-120
Hitachi®
NV45AB25.50.12120
7/8" – 1-3/4"YesNoNo
PneumaticNoYesYesYesYesFixedNoNo
70-120
Bostitch®
RN45-14.90.12120
3/4" – 1-3/4"YesNoNo
SpringNoNoYesYesYesFixedNoNo
70-120
DEWALTD51321
4.90.12120
3/4" – 1-3/4"YesYesYes
PneumaticYesYesYesYesYesFixedNoYes
70-120
Max® is a registered trademark of Mas Company Limited Corporation. Hitachi® is a registered trademark of Hitachi Limited Corporation. Bostitch® is a registered trademark of Stanley Logistics, Inc.
Hinged Feed Piston CoverProtects the feed pistonfrom debris accumulationand allows for quick andeasy cleaning
PERFORMANCE EASE OF USE
SPEED
• Durable• Works as fast as you do• Easy to use
Unique door sequence allows forquick and easy nail loading.
Nose door locks the nails in placebefore the canister closes.
SPEED
Cycles/Secon
d
Competitor C Competitor B
25
20
15
10
5
Competitor A DEWALTD51321
Works as Fast as the User Demands!
Cycle rate of (23) fastenersper second
15
HAND CARRY (SEALED-LUBE)
D55146
HEAVY-DUTY 200 PSI, 4.5 GALLONWHEELED PORTABLE COMPRESSOR
MANUFACTURERModelPower Supply (running HP)DriveSCFM @ 90 PSIISO1217 ClaimTank (gallons)Max PSIWeight (lbs)
DEWALTD55140
DEWALT 0.3 HPDirect0.75Yes1.013524
Senco®
PC10100.5 HPDirect
0.6 @ 100 PSINo1.012520
MANUFACTURERModelPower Supply (running HP)DriveSCFM @ 90 PSIISO1217 ClaimTank (gallons)Max PSIWeight (lbs)
Hitachi®
EC791.0 HPDirect2.7No6.013560
DEWALTD55141
DEWALT 0.6 HPBelt2.0Yes2.015030
Bostitch®
CAP2060P1.6
Direct2.7No6.013551
Senco®
PC09681.0 HP (Peak)
Direct2.2 @ 100 PSI
No2.513538
KEY
FEATURES
Ball Drain ValveAllows for quick andthorough tank draining* Usable air calculated based on available air per gallon over 90 psi.
Carry HandleRobust handleprovides mobility
Telescoping Pull HandleAllows user to pull thecompressor acrossjobsite terrain
2" GaugesAllows for easy readingduring operation
High-Flow RegulatorAllows for maximum nailer performance
Two High-Flow CouplersTwo couplers for operation of multiple nailersAllows for maximum nailer performance
MANUFACTURERModelPower Supply (running HP)DriveSCFM @ 100 PSIISO1217 ClaimTank (gallons)Max PSIWeight (lbs)
DEWALTD55146
DEWALT 1.8 HPBelt5.2Yes4.520083
DEWALTD55168
DEWALT 1.8 HPBelt5.4Yes1520092
ALSO AVAILABLE IN 15GALLON WORKSHOPCOMPRESSOR
D55168
Senco® is a registered trademark of Senco Products, Inc. Hitachi® is a registered trademark of Hitachi Limited Corporation. Bostitch® is a registered trademark of Stanley Logistics, Inc.
Roll CageFor maximum durability and protection
Vertical StandAllows compressor to bestored vertically for efficientuse of storage space
200 PSI, 4.5 Gallon TankProvides 80% more usableair* than the industry leading150 PSI compressor
16
PERFORMANCE
EASE OF USE TECHNOLOGY BENEFITS
4.5 GallonCompressor Tank
1.8HPRunning
Produces
80% MORE
5.2SCFM@ 90 PSI
200Tank Pressure
MAXPSI
*Usable air calculated based on available air per gallon over 90 psi.
usable air thanindustry leader*
Durable Oil-Free Pumpfor long life andmaintenance-freeoperation
Fully Protected RollCage Designto protect compressorfrom harshjobsite conditions
Protective FixedMetal Consoleprotects compressorgauges, regulator andcouplers during useand transportation
Vertical Stand allows user tosave space by transporting orstoring the compressor in avertical position
10" Pneumatic Wheels andHandles provide superiorstability and easy mobility
Ball Drain Valve allows forquick and thorough tankdraining for longer life
HigherPerformance
Lighter Weight &Lower Noise
Performan
ce
COMPETITIVE TRADITIONAL COMPRESSOR
Size
andNo
ise
The D55146 providesusers with 80% moreusable air* than theindustry leader allowingusers to do more work andbe more productive.
LOW NOISE*Tested Per ISO 3744
78dBA*
USAGE CHART
Brad:7 – 13
Finish:5 – 9
Framers:2 – 3
Roofers:2 – 4
NAILERS SUPPORTED
DURABILITY & RELIABILITY
17
KEY
FEATURES
MANUFACTURERModelPower Supply (running HP)DriveSCFM @ 100 PSIISO1217 ClaimTank (gallons)Max PSIWeight (lbs)
DEWALTD55151
DEWALT 1.1 HPDirect3.2Yes4.012553.3
DEWALTD55152
DEWALT 1.1 HPDirect3.8Yes4.012565
DEWALTD55153
DEWALT 1.1 HPDirect3.8Yes4.012556.5
MANUFACTURERModelPower Supply (running HP)DriveSCFM @ 100 PSIISO1217 ClaimTank (gallons)Max PSIWeight (lbs)
Makita®
MAC52003.0 HP (Peak)
Direct6.5No5.214088
D55154D55154
DEWALT 1.1 HPDirect3.8Yes4.012587
Hitachi®
EC119SA1.6 HPDirect4.0No4.013563.7
Makita®
MAC42002.5 HP (Peak)
Direct4.2No4.213080
RIDGID®
OL50135AL1.5 HPDirect
3.7 @ 90 PSIYes5.013555
MANUFACTURERModelPower Supply (running HP)DriveSCFM @ 100 PSIISO1217 ClaimTank (gallons)Max PSIWeight (lbs)
Quincy®
H1214PN2.0 HP (Peak)
Direct4.1No4.4125
65 shipping
Jenny®
AM780-HC4V2.0 HP (Peak)
Direct4.1No4.012556.5
Senco®
PC11312.0 HP (Peak)
Direct3.8No4.312560
HAND-CARRY (OIL-LUBE) ELECTRIC COMPRESSORS
Ball Drain ValveAllows for quick andthorough tank draining
Universal Quick CouplersTo easily support multiple tools
10" Pneumatic Wheelsand Collapsible HandleFor ease of mobility
Oil Lubricated Pumpwith Cast Iron CylinderImproves durability and life
ConvenientCord WrapFor easy storage
Top Load Panel withTie Down HolesAllows unit to transportloads up to 100 lbs
High Flow RegulatorFor increased performance
Easy Access to Pump
4.0 CFM
Soft Start Valves
D55154
HEAVY-DUTY 1.1 HP CONTINUOUS 4 GALLONELECTRIC AIR COMPRESSOR
Rol-Air®
FC20022.0 HP (Peak)
Direct4.1No4.3125
64 shipping
Makita® is a registered trademark of Makita Corporation. Hitachi® is a registered trademark of Hitachi Limited Corporation. Jenny® is a registered trademark of Jenny Products, Inc. Quincy® is a registered trademark of Coltec Industries INC.RIDGID® is a registered trademark of RIDGID, Inc. Senco® is a registered trademark of Senco Products, Inc.
18
PERFORMANCE DURABIL I TY
EASE OF USE
125 PSI
4.0Gallon Tank
Dual Soft Start Valves
1.1HPInduction Motor
4.0 SCFM
• Wrap-around Frame• Protected Control Panel• Oil-lube Pump• Cast Iron Cylinder• Large Metal Hubs Tires
• 10" Wheels/Collapsing Handle• Transport Deck• Cord Wrap• Easy Crankcase Access• Ball Drain Valve
USAGE CHART
Brad:5 – 10
Finish:4 – 7
Framers:1.5 – 2.5
Roofers:2 – 3
NAILERS SUPPORTED
19
PNEUMATIC FINISH NAILERSK
EY
FEATURES
D51257K
HEAVY-DUTY FINISH NAILERS
360˚ Exhaust CapChannels air and jobsitedust away from the user
Tool-Free Jam ClearFor rapid removal of bent nails
Low-Profile No-Mar PadWith swept-back contact tipfor increased visibility
Tool-Free AdjustableBelt HookAllows tool to hangon belt
Lightweight MagnesiumBody - 3.85 lbs*Reduces user fatigue
Rear Load, Loadand Lock and Lock& Load Magazine*Quick and easyfastener reload
*Feature not available on D51238K
APPL ICAT IONS
Trim
Cabinetmaking
DURABIL I TY & REL IABIL I TY
Trigger Lock-Off allows triggerto be disabled when not in use
360˚ Exhaust Cap channels dustand air away from the user
Low Profile No-Mar Padincreases visibility and reducesmarring on material
Tool-Free DepthAdjustmentQuick depthsetting for propernail countersink
Injection Molded GripReduces user fatigue andresists ripping & tearing
PERFORMANCE & EASE OF USE
Sealed Lube Dual TechTM
allows for oil free or oillube operation
Internal Piston Catchfor consistent maximumpower on every shot
Clean Line Of Sitefor accurate andeasy nailing
Molding
Lightweight Magnesium Bodydelivers a unit that is amongthe lightest in the industry
20
15 GAUGEFINISH NAILERSMANUFACTURERModelNail LengthWeight (lbs)TechnologyDepth Of DriveJam ReleaseAdjustable Air ExhaustBelt HookNail CapacityBodyTrigger LockCaseAccessories
DEWALTD51276K
1" – 2-1/2"< 4 lbs
Sealed Lube Dual Tech (Oil free & Oil Lube)
Tool FreeTool FreeTool FreeAdjustable
110Magnesium
YesYes
Nails, Glasses
Bostitch®
N62FNK-21-1/4" – 2-1/2"
3.8 lbsMaintenance free
Tool FreeTool FreeTool Free
No130
MagnesiumNoYesNails
Senco®
FP41xp1-1/4" – 2-1/2"
4 lbsMaintenance free
Tool FreeTool FreeTool FreeAdjustable
100Magnesium
NoNo
None
RIDGID®
R250AFA1” – 2-1/2”
3.9 lbsOil
Tool FreeTool FreeTool FreeAdjustable
100Magnesium
NoYesNails
Hitachi® is a registered trademark of Hitachi Limited Corporation. Bostitch® is a registered trademark of Stanley Logistics, Inc.Senco® is a registered trademark of Senco Products, Inc. Paslode® is a registered trademark of Illinois Tool works, Inc.
16 GAUGEFINISH NAILERSMANUFACTURERModelNail LengthWeight (lbs)TechnologyDepth Of DriveJam ReleaseAdjustable Air ExhaustBelt HookNail CapacityTrigger LockCaseAccessories
DEWALTD51257K
1" – 2-1/2"3.85 lbs
Sealed Lube Dual Tech (Oil free & Oil Lube)
Tool FreeTool FreeTool FreeAdjustable
100YesYes
1,000 Fasteners, Case, Oil, Safety Glasses
Stanley-Bostitch®
FN16250K-21-1/4" – 2-1/2"
3.3 lbsMaintenance Free
Tool FreeTool Free
Rear - FixedNo104NoYesNails
RIDGID®
R250SFA3/4" – 2-1/2"
3.5 lbsOil
Tool FreeTool FreeTool FreeAdjustable
100Selectable
YesNails
Senco®
FP321-1/4" – 2-1/2"
4.0 lbsOil
Tool FreeTool FreeTool Free
Yes110NoYes
Oil, Case, Fastener Rebate
18 GAUGEBRAD NAILERSMANUFACTURERModelRangeWeight (lbs)Depth ControlJam ReleaseAdjustable Air ExhaustRubber GripFittingReload IndicatorMagazine CapacityNon-Marring TripKit
DEWALTD51238K5/8" – 2"
2.84 DetentsFrontYesYesNo
Side/top110YesCase
Bostitch®
BT200K5/8" – 2"
2.1YesNo
No – rearYes
Yes (with dust cap)Side100Yes
Case, 100 of 2" brad nails
Hitachi®
NT50AE3/4" – 2"
3.2NoYesYesYesYesSide100No
Case, glasses
Paslode®
T200-F185/8" – 2"
2.1YesSideYesYesYesSide100Yes
Oil, case, glasses
Senco®
FP185/8" – 2"
2.9YesNo
No – rearYesYesSide110Yes
Case, oil, fastener rebate
18 GAUGE BRADNAILERSMANUFACTURERModelRangeWeight (lbs)Depth ControlJam ReleaseAdjustable Air ExhaustGripFittingMagazine CapacityTriggerNon-Marring tripKit
DEWALTD51236K
5/8" – 1-1/4"2.4
Tool FreeFront
Yes - FrontIntegrated
No110
Sequential w/ LockYes
Case, Oil, Glasses
Bostitch®
BT125K5/8" – 1-1/4"
1.9Tool FreeSplit NoseNo - RearIntegrated
Yes100
SequentialYes
Case, 1000 Nails
Hitachi®
NT32AE25/8" – 1-1/4"
2.0Tool FreeFront
Yes - FrontSlip OnYes100
SelectableYes
Case, Glasses
Paslode®
T125-F185/8" – 1-1/4"
1.753Tool Free
SideYes - FrontSlip OnYes100
SequentialYes
Case, Oil, Glasses
Senco®
FP155/8" – 1-1/4"
2.4Tool Free
NoNo - RearSlip OnYes110
SequentialYes
Case, Oil, Fastener Rebate
(1-3/8" or Smaller)
HEAVY-DUTY SELF FEED BITS
KEY
FEA
TU
RES
SPADE BIT LIFE
Number of holes in 3/4" particle board 30 lbs of force.
DEWALT
CompetitorB
CompetitorA
CompetitorC
CompetitorD
300163
65
206
1310 50 100 150 200 250 300
45%MORE
LIFE
PRIMARY USERS• Electricians
• Plumbers
• General Contractors
• Concrete Formers
PRIMARY USER• Plumbers
DEWALT COMPETITION
DEWALT COMPETITION
Aggressive Angle
More Materialin Wear Area
DEWALTCompetition
DEW
ALT
®
Max Life CornerLonger life in nails
Extreme Speed ChannelFast chip removal
Heavy-Duty ShankSuperior durability
1/4" Ball Groove ShankQuick change
SELF FEED BIT LIFE
Number of holes into particle board with SPF backer2-1/2" cutting depth.
302
121
149
0 50 100 150 200 250 300 350
CompetitorB
CompetitorA
DEWALT
2XMORE
LIFE
Aggressive SpurFast material penetration
Heat-Treated Tool SteelMaximum durability in nails
Optimized CuttingGeometryLonger bit life
Open Tooth DesignIncreased resharpenable edge; Deep gullets removemore material
7/16" Ball GrooveShankQuick change
HEAVY-DUTY SPADE BITSK
EY
FEA
TU
RES
Cat # DescriptionShortDW1570 1/4" x 6" DW1571 5/16" x 6" DW1572 3/8" x 6" DW1573 7/16" x 6" DW1574 1/2" x 6" DW1575 9/16" x 6" DW1576 5/8" x 6" DW1577 11/16" x 6" DW1578 3/4" x 6" DW1579 13/16" x 6" DW1580 7/8" x 6" DW1581 15/16" x 6" DW1582 1" x 6" DW1583 1-1/8" x 6" DW1584 1-1/4" x 6" DW1585 1-3/8" x 6" DW1586 1-1/2" x 6"Bulk 25 PacksDW1575B25 9/16" x 6"DW1576B25 5/8" x 6"DW1578B25 3/4" x 6"DW1580B25 7/8" x 6"DW1582B25 1" x 6"DW1583B25 1-1/8" x 6"DW1584B25 1-1/4" x 6"LongDW1590 3/8" x 16"DW1591 1/2" x 16"DW1592 5/8" x 16"DW1593 3/4" x 16"DW1594 7/8" x 16"DW1595 1" x 16"Sets and ExtensionsDW1587 6-Pc. SetDW1588 6" ExtensionDW1589 12" Extension
Cat # DescriptionDW1630 1" DW1631 1-1/8" DW1632 1-1/4" DW1633 1-3/8" DW1634 1-1/2" DW1635 1-3/4" DW1636 2" DW1637 2-1/8" DW1638 2-1/4" DW1639 2-9/16" DW1640 3" DW1641 3-5/8" DW1642 4-5/8" DW1650 Replacement Parts for DW1630-DW1639DW1651 Replacement Parts DW1640-DW1642 DW1646 5-1/2" ExtensionDW1647 12" ExtensionDW1648 5-Pc. Kit (1-3/8", 1-1/2",
2-1/8", 2-9/16", 5-1/2" Extension)DW1649 8-Pc. Kit (1", 1-1/8", 1-1/4", 1-1/2",
1-3/4", 2-1/8", 2-9/16", 5-1/2" Extension)DW1639D2 2-9/16" Self Feed Bit 2 Pack
BULK PACKSAVAILABLE
NEWTWOPACK
DWA17LBR 5/14/08 1:06 PM Page 2
HEAVY-DUTY WOOD CUTTING RECIPROCATING SAW BLADES
PRIMARY USERS• Electricians
• Power & Light Companies
PRIMARY USERS• General Contractors
• Mechanical & Electrical Contractors
• Plumbers
SHIP AUGER BIT LIFE
Number of holes into particle board with (1) 1018 steel 1-1/4" cutting depth.
0 10 20 30 40 50 60 70
CompetitorB
CompetitorA
DEWALT 68
12
34
2XMORE
LIFE
Cat # Dia. Overall FluteLength Length
ShortDW1665 5/8" 6" 4"DW1666 11/16" 6" 4" DW1667 3/4" 6" 4"DW1668 13/16" 6" 4" DW1669 7/8" 6" 4" DW1670 15/16" 6" 4" DW1671 1" 6" 4" DW1672 1-1/16" 6" 4" DW1673 1-1/8" 6" 4" DW1674 1-1/4" 6" 4" DW1675 1-3/8" 6" 4" DW1676 1-1/2" 6" 4" LongDW1679 1/2" 17" 12" DW1680 9/16" 17" 12" DW1681 5/8" 17" 12" DW1682 11/16" 17" 12" DW1683 3/4" 17" 12" DW1684 13/16" 17" 12" DW1685 7/8" 17" 12" DW1686 15/16" 17" 12" DW1687 1" 17" 12" DW1688 1-1/16" 17" 12" DW1689 1-1/8" 17" 12" DW1690 1-1/4" 17" 12" DW1691 1-3/8" 17" 12" DW1692 1-1/2" 17" 12" SetsDW1080 4-Pc.Set (5/8", 3/4". 7/8", 1")DW1081 3-Pc. Set (Three 7/8" Bits)
Cat # Length TPI BodyType
2 PacksDW4802-2 6" 6 TaperDW4804-2 12" 6 Taper5 PacksDW4802 6" 6 TaperDW4803 9" 6 TaperDW4804 12" 6 TaperDW4860 12" 6 TaperDW4862 6" 6 TaperDW4863 9" 6 Taper10 PacksDW4802-10 6" 6 Taper25 PacksDW4802B25 6" 6 TaperDW4803B25 9" 6 TaperDW4804B25 12" 6 TaperDW4863B25 9" 6 Taper100 PacksDW4802B 6" 6 TaperDW4803B 9" 6 TaperDW4804B 12" 6 TaperDW4863B 9" 6 Taper
Plunge PointPierces wood for fast and accurate plunge
Large Plunge GulletRemoves more materialfor faster cutting
ReinforcedShoulderIncreaseddurability
Aggressive Shank AngleIncreases tooth engagement asblade wears extending blade life
7/16" BallGroove ShankQuick change
Dual Cutting EdgesMaximum durabilityin nails
Hardened Alloy SteelSuperior bit life
HEAVY-DUTY SHIP AUGER BITS
KEY
FEA
TU
RES
FOR DEWALT PERFORMANCE, DEMAND DEWALT ACCESSORIES.
KEY
FEA
TU
RES
DEWALT
DEWALT
Competitor
Competitor
Only points oftooth engages
Entire cuttingsurface engages
DEWALT
AUGER SETSAVAILABLE
DW1081
DWA17LBR 5/14/08 1:07 PM Page 3
IMPACT READY™
HEAVY-DUTY HOLE SAWS
KEY
FEA
TU
RES
Standard Industry DesignAllows for fitmentwith all brands ofhole saws
LARGE (1-1/4" – 6")
SMALL (9/16" – 1-3/16")
Single StepEngagementNo alignmentrequired
Pilot Point® BitStarts bit on contact to reduce walking inmetal drilling applications
Tool-Free,Quick-ReleaseCollarEliminates the needfor wrenches tochange hole saws
HEAVY-DUTY QUICK CHANGE HOLE SAW MANDRELS
KEY
FEA
TU
RES
PRIMARY USERS• Electrical Contractors • Plumbing Contractors
Cat # Description
D180012IR 3/4" (19mm) IMPACT READY™ Hole SawD180014IR 7/8" (22mm) IMPACT READY™ Hole SawD180016IR 1" (25mm) IMPACT READY™ Hole SawD180018IR 1-1/8" (29mm) IMPACT READY™ Hole SawD180020IR 1-1/4" (32mm) IMPACT READY™ Hole SawD180022IR 1-3/8" (35mm) IMPACT READY™ Hole SawD180024IR 1-1/2" (38mm) IMPACT READY™ Hole Saw
PRIMARY USERS• Electrical Contractors • Plumbing Contractors
Patented Tooth DesignFaster drilling speed
Hex ShankFits in all impactdrivers
Impact RatedIncreased durability
Ejection SpringNo plug to remove
Thin WalledDesignOptimum metaldrilling efficiency
• Rated up to 2000 in-lbs of torque
• Qualified for CordlessImpact Drivers
Specifically designed for METAL/PLASTIC DRILLING.
Thin Materials (Stainless Steel, Cast Iron,Mild Steel, Aluminum and Plastic)
Heavy-Duty Spring-Loaded CollarAutomatically engages drive pins;Tested to 15,000 life cycles
Heavy-Duty Steel BodyProvides long life and excellentdurability
Cat # Description Fits Hole Saws
DW1810 3/8" shank 9/16"–1-3/16"DW1808 Pilot Bit
Cat # Description Fits Hole SawsDW1803 7/16" shank 1-1/4"– 6" DW1805 3/8" shank 1-1/4"–3"DW1808 Pilot Bit DW1807 Short Pilot Bit
Tool-Free
How TheCompetition
WorksHole saw easily locks to mandrel requiring tools
for removal
DWA17LBR 5/14/08 1:07 PM Page 4
FOR DEWALT PERFORMANCE, DEMAND DEWALT ACCESSORIES.
Cat # Description Qty/BoxBulk PacksD180012B12 3/4" (19mm) Standard Hole Saw 12 D180014B12 7/8" (22mm) Standard Hole Saw 12D180016B12 1" (25mm) Standard Hole Saw 12 D180018B12 1-1/8" (29mm) Standard Hole Saw 12D180020B12 1-1/4" (32mm) Standard Hole Saw 12 D180022B12 1-3/8" (35mm) Standard Hole Saw 12D180024B12 1-1/2" (38mm) Standard Hole Saw 12 D180028B6 1-3/4" (44mm) Standard Hole Saw 6D180032B6 2" (51mm) Standard Hole Saw 6 D180034B6 2-1/8" (54mm) Standard Hole Saw 6D180040B6 2-1/2" (64mm) Standard Hole Saw 6 D180048B6 3" (76mm) Standard Hole Saw 6D180064B6 4" (102mm) Standard Hole Saw 6 SetsD180001 9 Piece Heavy-Duty Plumber’s Hole Saw SetD180002 9 Piece Heavy-Duty Electrician’s Hole Saw Set D180005 14 Piece Heavy-Duty Master Hole Saw Set
HEAVY-DUTY HOLE SAWS
KEY
FEA
TU
RES
BULK HOLE SAWSAVAILABLE
Double Tooth DesignStrengthens Each ToothFor longer life andimproved durability
Thick, hardenedbacking platesPrevent threadstripping
Sharper Tooth Geometry Cuts material faster forincreased productivity
Deep CutStyle Will cuttwo timesmaterial inone pass
PRIMARY USERS• Electrical Contractors
• Plumbing Contractors
Compact DesignContains all holesaws and mandrelsin a small, securesize
Heavy-Duty Casewith HandleProvides protection forhole saws andreduces cracking
Includes Large quick change mandrel and small quickchange mandrel
D180005
MASTER HOLESAW SETIncludes Large & Small Quick Change Hole SawMandrels
DWA17LBR 5/14/08 1:07 PM Page 5
PRIMARY USERS
Cat # Socket Drive Size Size
DW2281 1/4" 3/8"DW2282 5/16" 3/8"DW2283 11/32" 3/8"DW2284 3/8" 3/8"DW2285 7/16" 3/8"DW2286 1/2" 3/8"DW2287 9/16" 3/8"DW2288 5/8" 3/8"DW2289 11/16" 3/8"DW2290 3/4" 3/8"DW2291 13/16" 3/8"DW2292 7/8" 3/8"DW2293 15/16" 3/8"DW2294 1" 3/8"
Cat # Socket Drive Size Size
DW22842 3/16" 1/2"DW22852 7/16" 1/2"DW22862 1/2" 1/2"DW22872 9/16" 1/2"DW22882 5/8" 1/2"DW22892 11/16" 1/2"DW22902 3/4" 1/2"DW22912 13/16" 1/2"DW22922 7/8" 1/2"DW22932 15/16" 1/2"DW22942 1" 1/2"DW22952 1-1/16" 1/2"DW22962 1-1/8" 1/2"DW22972 1-1/4" 1/2"
Deep Thin-WalledDesignThinner than wrench sockets fortough access areas;Hardened for industrial applications
Large LaserEtched MarkingsEasily identifiablesizes
Recessed CornersDistributes torqueacross flats;Rated up to 2000 in-lbs of torque
Competition
Driven on PointsEasily Cracked
DEWALT
Driven on FlatsMore Durable
• Mechanical Contractors
• Deck Builders
• Overhead Door Installers
Cat # DescriptionAdapters/Reducers/HoldersDW2045 3" Magnetic Bit Tip HolderDW2046 2" Magnetic Bit Tip HolderDW2298 1/2" Square to 1/4" Rapid Load AdaptorDW2299 1/2" to 3/8" ReducerDW2541IR 1/4" Hex Shank to 1/4" Socket AdapterDW2542IR 1/4" Hex Shank to 3/8" Socket AdapterDW2547IR 1/4" Hex Shank to 1/2" Socket AdapterNutsettersDW2218IR 1/4" x 1-7/8" Magnetic NutdriverDW2219IR 5/16" x 1-7/8" Magnetic NutdriverDW2220IR 3/8" x 1-7/8" Magnetic NutdriverDW2221IR 1/4" x 2-9/16" Magnetic NutdriverDW2222IR 5/16" x 2-9/16" Magnetic NutdriverDW2223IR 3/8" x 2-9/16" Magnetic NutdriverDW2227IR 7/16" x 1-7/8" Magnetic NutdriverDW2228IR 7/16" x 2-9/16" Magnetic NutdriverDW2230IR 1/2" x 1-7/8" Magnetic NutdriverDW2234IR 1/2" x 2-9/16" Magnetic NutdriverDW2235IR 5 Piece Nutdriver Set Magnetic Nutdriver
(1/4", 5/16", 3/8", 7/16", 1/2")
IMPACT READY™ Adapters/Nutsetters
• Rated up to 2000 in-lbs of torque
• Qualified for CordlessImpact Drivers
DW2169 38 Piece IMPACT READY™ Accessory SetSet Contains:• (8) #2 Phillips 1" Insert Bits• (8) #2 Phillips 1" Drywall Insert Bits• (5) #2 Phillips 2" Power Bits• (8) #2 Phillips 1" Double Ended
Insert Bits - Patented • (2) Nutdrivers: 1/4", 5/16"
• (1) 3/8" Socket Adapter• (4) 3/8" Drive Deep Sockets:
3/8", 7/16", 1/2", 9/16" • (1) Pivot Holder - Patented • (1) Magnetic Bit Holder
IMPACT READY™ DEEP SOCKETSK
EY
FEA
TU
RES
DWA17LBR 5/14/08 1:07 PM Page 6
PRIMARY USERS• Electrical Contractors
• General Contractors
• Cabinet Installers
20˚ Pivot Angle Fits in tight spaces; Eliminatesmany right angle drill needs
Locking Collar Allows for straightor angled driving
Works inDrywall Guns
• Rated up to 2000 in-lbs of torque
• Qualified for CordlessImpact Drivers
SCREWDRIVING BITS
KEY
FEA
TU
RES
FOR DEWALT PERFORMANCE, DEMAND DEWALT ACCESSORIES.
PRIMARY USERS• Drywall Installers
• General Contractors
• Deck Builders
2 Bits in 1
Exact #2 Fastener Fitment Fits just like a #2 Phillips bit
Fits Drywall Guns,Drive Guidesand Bit Holders
DW2002DE
Cat # DescriptionPhillips Bit Tips
DW2002DEBL #2 Phillips Double Ended1" Bit Tips - Drywall 100 Pack Bit Box
DW2002DEX15 15 Pack Double EndedBit Tip Box
DW2001IR #1 Phillips - IMPACT READY™
DW2002IR #2 Phillips - IMPACT READY™
DW2003IR #3 Phillips - IMPACT READY™
DW2004IR #2 Phillips (Reduced Dia.) -IMPACT READY™
DW2022IR #2 2" Phillips Power Bit - IMPACT READY™
DW2032IR #2 3-1/2" Phillips Power Bit -IMPACT READY™
Square Recess Bit TipsDW2201IR #1 Square Recess -
IMPACT READY™
DW2202IR #2 Square Recess - IMPACT READY™
DW2212IR #2 2" Square Recess Power Bit - IMPACT READY™
IMPACT READY™ PIVOTING HOLDERS
KEY
FEA
TU
RES
Cat # DescriptionDWPVTHLD Magnetic Pivot Holder DW2221IRP 1/4" Magnetic Pivoting NutdriverDW2219IRP 5/16" Magnetic Pivoting NutdriverDW2223IRP 3/8" Magnetic Pivoting NutdriverDW2228IRP 7/16" Magnetic Pivoting NutdriverDW2234IRP 1/2" Magnetic Pivoting NutdriverDWPVTDRV3 3 Piece Pivoting Netsetters (1/4", 5/16", 3/8")DWPVTDRV 4 Piece Pivoting Netsetters (1/4", 5/16", 3/8", 7/16")SetsDWPVTC14 14 Piece Pivoting Holder SetDW2169 38 Piece IMPACT READY™ Accessory KitDW2153 34 Piece IMPACT READY™ Screwdriving SetDW2583 65 Piece IMPACT READY™ MAC Contractor Set
DW2234IRP DW2223IRP
Pivoting Nutdrivers
DWPVTHLD
DWA17LBR 5/14/08 1:07 PM Page 7
PRIMARY USERS
Premium SteelMaximum durability& long life
Thicker BodyReduceddeflection
Optimum ToothGeometryLonger life, easy control, less breakout& faster cuts
Large Deep GulletsFor easy chip removalincreased speed
Increased Taper AngleLess breakout & less burn
Patented Tip DesignFor easy plunge cut
Compact SizeFits in jig saw case
Clear Lid DesignBlades are visiblewhen case is closed
Two Sided CaseHolds 30+ blades
• Cabinet Shops & Installers
• General Contractors & Carpenters
• Ship Builders
Cat # Length TPI Application Shank2 PacksDW3700H2 4" 6 Fast Wood Cutting HCS UDW3703H2 4" 6 Fast, Clean Wood Cutting HCS UDW3710H2 4" 10 Fine Finish Wood Cutting HCS UDW3715H2 3" 12 Scrolling HCS UDW3750H2 4" 6 Fast Wood Cutting HCS TDW3753H2 4" 6 Fast, Clean Wood Cutting HCS TDW3755H2 4" 8 Aluminum/Fiberglass HCS TDW3760H2 4" 10 Fine Finish Wood Cutting HCS TDW3762H2 4" 10 Downcutting HCS TDW3765H2 3" 12 Scrolling HCS T5 PacksDW3700-5 4" 6 Fast Wood Cutting HCS UDW3700H 4" 6 Fast Wood Cutting HCS UDW3750H 4" 6 Fast Wood Cutting HCS TDW3751-5 4" 6 Wide Body HCS TDW3753-5 4" 6 Fast, Clean Wood Cutting HCS TDW3753H 4" 6 Fast, Clean Wood Cutting HCS TDW3755-5 4" 8 Aluminum/Fiberglass HCS TDW3755H 4" 8 Aluminum/Fiberglass HCS TDW3760-5 4" 10 Fine Finish Wood Cutting HCS TDW3760H 4" 10 Fine Finish Wood Cutting HCS TDW3762-5 4" 10 Downcutting HCS TDW3762H 4" 10 Downcutting HCS TDW3765-5 3" 12 Scrolling HCS TDW3765H 3" 12 Scrolling HCS TDW3703-5 4" 6 Fast, Clean Wood Cutting HCS UDW3703H 4" 6 Fast, Clean Wood Cutting HCS UDW3705-5 4" 8 Aluminum/Fiberglass HCS UDW3705H 4" 8 Aluminum/Fiberglass HCS UDW3710-5 4" 10 Fine Finish Wood Cutting HCS UDW3710H 4" 10 Fine Finish Wood Cutting HCS UDW3712-5 4" 10 Downcutting HCS UDW3712H 4" 10 Downcutting HCS UDW3715-5 3" 12 Scrolling HCS UDW3715H 3" 12 Scolling HCS UDW3750-5 4" 6 Fast Wood Cutting HCS T50 PacksDW3703H50 4" 6 Fast, Clean Wood Cutting HCS UDW3710H50 4" 10 Fine Finish Wood Cutting HCS UDW3750H50 4" 6 Fast Wood Cutting HCS TDW3753H50 4" 6 Fast, Clean Wood Cutting HCS TDW3755H50 4" 8 Aluminum/Fiberglass HCS TDW3760H50 4" 10 Fine Finish Wood Cutting HCS TDW3762H50 4" 10 Downcutting HCS TSets DescriptionDW3741C 10 Piece T-Shank Jig Saw Set w/CaseDW3742C 14 Piece T-Shank Jig Saw Set w/CaseDW3744C 10 Piece U-Shank Jig Saw Set w/Case
U Shank
T Shank
WOOD CUTTINGJIG SAW BLADES & SETS
KEY
FEA
TU
RES
NEW JIG SAW CASE
DWA17LBR 5/14/08 1:07 PM Page 8
TYPE 1 CHOP SAW WHEELS
KEY
FEA
TU
RES
Cat # DescriptionDW3599B10 7-1/4" 24T Ultra Thin
Framing Saw Blade
Cat # Dia. Thickness Arbor Specs Application Max RPMDW8005 10" 7/64" 5/8" A24R Metal Cutting 6,100 DW8004 12" 7/64" 1" A24R Metal Cutting 5,000 DW8001 14" 7/64" 1" A24R General Purpose 4,300 DW8002 14" 7/64" 1" A24S Bar Cutter 4,300 DW8003 14" 7/64" 1" A24T Stud Cutting 4,300 DW8009 10" 1/8" 5/8" C24R Concrete Cutting 6,100 DW8008 12" 1/8" 1" C24R Concrete Cutting 5,000 DW8007 14" 1/8" 1" C24R Concrete Cutting 4,300EXTENDED PERFORMANCEDW8057 12" 7/64" 1" TA24T Metal Cutting 5,000 DW8059 14" 7/64" 1" TA24T Stud Cutting 4,300
PRIMARY USERS• Residential Framers
Thin Kerf & UltraSharp CarbideReduces cutting forcerequired to push the blade
ConstructionGrade CarbideHigher impactresistance –cuts more nails
PRIMARY USERS• Mechanical Contractors
• Electrical Contractors
• Drywall & Framing Contractors
High PerformanceAluminum Oxide GrainFor long life and fastcutting
High Grain Concentration For aggressive cutting action andsmoother runningwheels
Proprietary Material Mix
Ensures durablelong life wheels
Two Full Sheetsof FiberglassFor durability
FOR DEWALT PERFORMANCE, DEMAND DEWALT ACCESSORIES.
WHEEL LIFE – # OF CUTS
Number of cuts until wheels will no longer make complete cutthrough material. Material = 2-1/2" x 2-1/2" x 1/4" angle iron.
DEWALT
CompetitorB
CompetitorA
CompetitorC
0 20 40 60 80 100
120%MORE
10%THINNER
KERFthan DW3178
DEWALT
ULTRA THIN KERF FRAMING SAW BLADE
KEY
FEA
TU
RES
Type 1C
B
A = Diameter B = Thickness C = Arbor
A
DURABILITY
Amount of force (lbs of energy) needed to crack 1 carbide tip.
DEWALT
CompetitorB
CompetitorA
CompetitorC
0 0.2 0.4 0.6 0.8 1.0 1.2
30%MORE
INITIAL CUT FORCE TEST
Average amount of force required (lbs) to cut 1.5" of particle board 50 feet.
DEWALT
CompetitorB
CompetitorA
CompetitorC
1.5 1.6 1.7 1.8 1.9 2.0 2.1
DWA17LBR 5/14/08 1:07 PM Page 9
TYPE 27 HIGH PERFORMANCEGRINDING WHEELS
KEY
FEA
TU
RES
Cat # Dia. Thickness Arbor Specs Application Max RPMMetal Grinding and CuttingDW8750 4-1/2" 3/32" 7/8" A24R Metal Cutting & Notching 13,300 DW8751 4-1/2" 3/32" 5/8"-11 A24R Metal Cutting & Notching 13,300 DW8752 5" 3/32" 7/8" A24R Metal Cutting & Notching 12,200 DW8753 5" 3/32" 5/8"-11 A24R Metal Cutting & Notching 12,200 DW4418 4" 1/8" 5/8" A24R Metal Cutting 15,200 DW4518 4-1/2" 1/8" 7/8" A24R Metal Cutting 13,300 DW4522 4-1/2" 1/8" 5/8"-11 A24R Metal Cutting 13,300 DW4618 5" 1/8" 7/8" A24R Metal Cutting 12,200 DW4526 5" 1/8" 5/8"-11 A24R Metal Cutting 12,200DW4419 4" 1/4" 5/8" A24R Metal Grinding 15,200 DW4514 4-1/2" 1/4" 7/8" A24R Metal Grinding 13,300 DW4523 4-1/2" 1/4" 5/8"-11 A24R Metal Grinding 13,300 DW4619 5" 1/4" 7/8" A24R Metal Grinding 12,200 DW4623 5" 1/4" 5/8"-11 A24R Metal Grinding 12,200DW4541 4-1/2" 1/4" 7/8" A24R Fast Metal Grinding 13,300 DW4542 4-1/2" 1/4" 5/8"-11 A24R Fast Metal Grinding 13,300 DW4543 5" 1/4" 7/8" A24R Fast Metal Grinding 12,200 DW4544 5" 1/4" 5/8"-11 A24R Fast Metal Grinding 12,200DW8434 4-1/2" 1/8" 7/8" A24R Pipeline Cutting/Grinding 13,300 DW8435 4-1/2" 1/8" 5/8"-11 A24R Pipeline Cutting/Grinding 13,300 DW8484 5" 1/8" 7/8" A24R Pipeline Cutting/Grinding 12,200 DW8436 5" 1/8" 5/8"-11 A24R Pipeline Cutting/Grinding 12,200
Cat # Dia. Thickness Arbor Specs Application Max RPMMasonry Grinding and CuttingDW4428 4" 1/8" 5/8" C24R Concrete Cutting 15,200 DW4528 4-1/2" 1/8" 7/8" C24R Concrete Cutting 13,300 DW4552 4-1/2" 1/8" 5/8"-11 C24R Concrete Cutting 13,300 DW4628 5" 1/8" 7/8" C24R Concrete Cutting 12,200 DW4658 5" 1/8" 5/8"-11 C24R Concrete Cutting 12,200DW4429 4" 1/4" 5/8" C24R Concrete Grinding 15,200 DW4524 4-1/2" 1/4" 7/8" C24R Concrete Grinding 13,300 DW4551 4-1/2" 1/4" 5/8"-11 C24R Concrete Grinding 13,300 DW4629 5" 1/4" 7/8" C24R Concrete Grinding 12,200 DW4553 5" 1/4" 5/8"-11 C24R Concrete Grinding 12,200
Three Full Sheets of Fiberglass For added durability
High PerformanceAluminum OxideGrain Long life and highmaterial removal
High Grain Concentration For aggressive
cutting action andsmoother running
wheels
Proprietary Material Mix
Ensures durablelong life wheels
PRIMARY USERS• Welders and Metal Fabricators
• Mechanical Contractors
Type 27C
AB
A = Diameter B = Thickness C = Arbor
WHEEL LIFE – GRIND RATIO
Number of grams removed from work piece for every gram lost from wheel. Material = 1018 cold rolled steel.
DEWALT
CompetitorB
CompetitorA
CompetitorC
0 2 4 6 8 10
120%MORE
DWA17LBR 5/14/08 1:07 PM Page 10
TYPE 1 HIGH PERFORMANCECUTTING WHEELS
FOR DEWALT PERFORMANCE, DEMAND DEWALT ACCESSORIES.
KEY
FEA
TU
RES
Cat # Dia. Thickness Arbor Specs Application Max RPMMetal CuttingDW8020 14" 1/8" 1" A24R Metal Cutting 5,500 DW8021 14" 1/8" 20mm A24R Metal Cutting 5,500 DW8022 12" 1/8" 1" A24R Metal Cutting 6,400 DW8023 12" 1/8" 20mm A24R Metal Cutting 6,400Concrete CuttingDW8024 14" 1/8" 1" C24P Concrete Cutting 5,500 DW8025 14" 1/8" 20mm C24P Concrete Cutting 5,500 DW8026 12" 1/8" 1" C24P Concrete Cutting 6,400 DW8027 12" 1/8" 20mm C24P Concrete Cutting 6,400 DW8038 14" 3/16" 1"- pin hole C24P Cured Concrete 4,300 DW8039 14" 3/16" 1"- pin hole C24N Green Concrete/Asphalt 4,300
High PerformanceSilicon Carbide orAluminum Oxide Grain For long life and highmaterial removal
High GrainConcentration For aggressive cuttingaction and smootherrunning wheels
Two Full Sheets of Thicker FiberglassTo withstand extremeapplications and hold
up to high speeds
PRIMARY USERS• Welders and Metal Fabricators
• Mechanical Contractors
Type 1C
B
A = Diameter B = Thickness C = Arbor
A
WHEEL LIFE – # OF CUTS
Number of cuts until wheels will no longer make complete cut through material. Material = 1-1/8" rebar.
DEWALT
CompetitorB
CompetitorA
CompetitorC
0 50 100 150
100%MORE
DWA17LBR 5/14/08 1:07 PM Page 11
TYPE 1 & 27 HIGH PERFORMANCETHIN CUTTING WHEELS
KEY
FEA
TU
RES
Type 27C
AB
A = Diameter B = Thickness C = Arbor
Type 1C
B
A = Diameter B = Thickness C = Arbor
A
PRIMARY USERS• Welders and Metal Fabricators
• Mechanical Contractors
Cat # Dia. Thickness Arbor Specs Application Max RPMType 1 Metal and Stainless CuttingDW8061 4" .045" 5/8" A60T Metal Cutting 15,200 DW8062 4-1/2" .045" 7/8" A60T Metal Cutting 13,300 DW8063 5" .045" 7/8" A60T Metal Cutting 13,300 DW8727 6" .045" 3/8" A60T Metal Cutting 13,300 DW8725 6" .040" 7/8" A60T Metal Cutting 13,300DW8726 6" .045" 7/8" A60T Metal Cutting 13,300 DW8064 6" .055" 7/8" A60T Metal Cutting 13,300 DW8065 7" .055" 7/8" A60T Metal Cutting 8,700Type 27 Metal and Stainless CuttingDW8420 4" .045" 5/8" A60T Metal Cutting 15,200 DW8424 4-1/2" .045" 7/8" A60T Metal Cutting 13,300 DW8425 5" .045" 7/8" A60T Metal Cutting 12,200 DW8426 6" .045" 7/8" A60T Metal Cutting 10,100 DW8427 7" .045" 7/8" A60T Metal Cutting 8,700
Thin .045" Wheel Design For fast burr free cutting
Proprietary Material Mix Ensures durablelong life wheels
ProprietaryAluminum Oxide
Grain CombinationFor aggressive cutting action
Two Full Sheetsof FiberglassFor durability
WHEEL LIFE – # OF CUTS
Number of cuts until wheels will no longer make complete cut through material. Material = 1/2" threaded rod.
DEWALT
CompetitorB
CompetitorA
CompetitorC
0 10 20 30 40
64%MORE
DWA17LBR 5/14/08 1:07 PM Page 12
TYPE 1 & 27 EXTENDED PERFORMANCETHIN CUTTING WHEELS
FOR DEWALT PERFORMANCE, DEMAND DEWALT ACCESSORIES.
KEY
FEA
TU
RES
Performance
Type 27C
AB
A = Diameter B = Thickness C = Arbor
Type 1C
B
A = Diameter B = Thickness C = Arbor
A
PRIMARY USERS• Welders and Metal Fabricators
• Mechanical Contractors
Cat # Dia. Thickness Arbor Specs Application Max RPMType 1 Metal and Stainless CuttingDW8850 4" .045" 5/8" Z60T Metal and Stainless Cutting 15,200DW8851 4-1/2" .045" 7/8" Z60T Metal and Stainless Cutting 13,300DW8852 5" .045" 7/8" Z60T Metal and Stainless Cutting 12,200DW8853 6" .045" 7/8" Z60T Metal and Stainless Cutting 10,100DW8854 7" .045" 7/8" Z60T Metal and Stainless Cutting 8,700Type 27 Metal and Stainless CuttingDW8856 4" .045" 5/8" Z60T Metal and Stainless Cutting 15,200DW8857 4-1/2" .045" 7/8" Z60T Metal and Stainless Cutting 13,300DW8858 5" .045" 7/8" Z60T Metal and Stainless Cutting 12,200DW8859 6" .045" 7/8" Z60T Metal and Stainless Cutting 10,100DW8860 7" .045" 7/8" Z60T Metal and Stainless Cutting 8,700
Thin .045" Wheel Design For fast burr free cutting
Proprietary Material Mix Ensures durablelong life wheels
Specially TreatedGrain Combination
For aggressive cutting action
Two Full Sheetsof FiberglassFor durability
WHEEL LIFE – # OF CUTS
Number of cuts until wheels will no longer make complete cut through material. Material = 1/2" threaded rod.
DEWALT
CompetitorB
CompetitorA
CompetitorC
0 20 40 60 80
30%MORE
DWA17LBR 5/14/08 1:07 PM Page 13
ROCK CARBIDE® 2 CUTTERSDS PLUS HAMMER BITS
KEY
FEA
TU
RES
Cat # Dia. Usable OverallLength Length
DW5400 5/32" 2" 4" DW5401 5/32" 4-1/2" 6-1/2"DW5402 3/16" 2" 4" DW5403 3/16" 4-1/2" 6-1/2"DW5404 3/16" 6-1/2" 8-1/2" DW5405 3/16" 8" 10" DW5406 3/16" 10" 12" DW5407 3/16" 12" 14" DW5408 3/16" 14" 16" DW5410 7/32" 4" 6" DW5412 7/32" 8" 10" DW5416 1/4" 2" 4" DW5417 1/4" 4" 6" DW5418 1/4" 6-1/2" 8-1/2" DW5420 1/4" 10" 12" DW5421 1/4" 12" 14" DW5424 5/16" 4" 6" DW5426 5/16" 10" 12" DW5427 3/8" 4" 6"DW5429 3/8" 8" 10"DW5430 3/8" 10" 12" DW5431 3/8" 16" 18"
Cat # Dia. Usable OverallLength Length
DW5432 3/8" 22" 24" DW5433 7/16" 4" 6" DW5435 7/16" 10" 12" DW5436 7/16" 16" 18" DW5437 1/2" 4" 6" DW5438 1/2" 8" 10" DW5439 1/2" 10" 12" DW5440 1/2" 16" 18" DW5441 1/2" 22" 24" DW5442 9/16" 4" 6" DW5443 9/16" 10" 12"DW5444 9/16" 16" 18" DW5445 9/16" 22" 24" DW5446 5/8" 6" 8" DW5447 5/8" 10" 12"DW5448 5/8" 16" 18"DW5449 5/8" 22" 24"DW5450 11/16" 6" 8" DW5453 3/4" 6" 8"DW5455 3/4" 10" 12"DW5456 3/4" 16" 18"DW5457 3/4" 22" 24"
Cat # Dia. Usable OverallLength Length
DW5458 27/32" 6" 8"DW5460 7/8" 6" 8"DW5461 7/8" 10" 12"DW5462 7/8" 16" 18"DW5464 1" 8" 10"DW5466 1" 16" 18"DW5468 1-1/8" 8" 10"DW5469 1-1/8" 16" 18"SetDW5740 5 Piece Set
Contains:3/16" x 4-1/2" x 6-1/2",1/4" x 2" x 4",1/4" x 4" x 6",3/8" x 4" x 6",1/2" x 4" x 6"
Cat # Dia. Usable OverallLength Length
Bulk PacksDW5401B25 5/32" 4-1/2" 6-1/2"DW5402B25 3/16" 2" 4"DW5403B25 3/16" 4-1/2" 6-1/2"DW5404B25 3/16" 6-1/2" 8-1/2"DW5405B25 3/16" 8" 10"DW5406B25 3/16" 10" 12"DW5410B25 7/32" 4" 6"DW5416B25 1/4" 2" 4"DW5417B25 1/4" 4" 6"DW5418B25 1/4" 6-1/2" 8-1/2"DW5424B25 5/16" 4" 6"DW5427B25 3/8" 4" 6"DW5437B25 1/2" 4" 6"DW5446B10 5/8" 6" 8"
PRIMARY USERS• Electricians
• Mechanical/Fire Protection
• Concrete/Tilt Wall Construction
• MRO
• Glaziers
Thicker Carbide TipFor longer life
Stronger FlutesIncreased steel prevents breakage
Elongated FourFlute DesignFaster materialremoval
DEWALT
Competition
DEWALT Competition
DEWALT
Competition
ONE REVOLUTION
DURABILITY
Number of holes in 4,000 PSI concrete with 1/4" x 4" x 6" bit.Internal testing performed Nov. 2007
DEWALT
Competitor
0 50 100 150 200
177
143 23%MOREHOLES
DWA17LBR 5/14/08 1:08 PM Page 14
ROCK CARBIDE® 4 CUTTER SDS PLUS HAMMER BITS
FOR DEWALT PERFORMANCE, DEMAND DEWALT ACCESSORIES.
KEY
FEA
TU
RES
Cat # Dia. Usable OverallLength Length
DW5471 5/8" 8" 10"
DW5472 5/8" 16" 16"
DW5474 3/4" 8" 10"
DW5475 3/4" 16" 16"
DW5477 7/8" 8" 10"
DW5478 7/8" 16" 16"
DW5479 1" 8" 10"
DW5480 1" 16" 18"
DW5481 1-1/8" 8" 10"
DW5482 1-1/8" 16" 18"
Open Head DesignFaster mill removal
Elongated Four Flute HelixFaster drilling
ROCK CARBIDE® TipMaximum durability& long life
Competitor
DEWALT
LongerLife
Competitor
DEWALT
Competitor
DEWALT
ONE REVOLUTION
PRIMARY USERS• Electricians
• Mechanical/Fire Protection
• Concrete/Tilt Wall Construction
• MRO
• Glaziers
SPEED
Seconds to drill one hole in 4,000 PSI concrete with 1/4" x 16" x 18" bit.
DEWALT
Competitor
4 6 8 10 12
20%FASTER
LOWER IS BETTER.
DWA17LBR 5/14/08 1:08 PM Page 15