Meeting OMV- PETROM / 06-24-2011

  JC VALVULAS / Spain

(Western Europe)

Since 1968

  TRUELINE Canada (North & South America)

TRUELINE VOSTOK Eastern Europe & C.I.S.

Oil & Gas, Power, Chemical, Petrochemical, Pulp & Paper , Mine extraction…

  Wide range of superior quality products

  High level of expertise   High performance goals such as the guarantee

of long life products for severe applications

  Customer technical support with our research & development department

Technical description:

  Full and Reduced bore

  Floating and Trunnion mounted ball valves

  From ½” up to 36” #2500.

  Floating BV up to 8” #300.

  Soft and Metal seats

  ANSI & DIN designs

  Motorized ball valves

Special applications:

  High temperature

  3 ways ball valves

  By-pass ball valves

  Cryogenic ball valves

Floating BV ASME

3-ways BV

Forged Trunnion mounted BV / Cut drawing

  Castings Quality as per ASME B16.34 Mandatory

Appendix I to IV in ASME valves and Severity Levels

S3-V3 to DIN 1690 and EN 10203 in EN-DIN valves

  Polished ball Ra 1 in soft seated valves (in metal seated valves ball is lapped); grinded stem Ra 1.6

  Full traceability of shell components, ball and stem as per EN 10204 3.1

  Antistatic device integral with the stem

  Viton A, Aflas or Kalrez primary stem seal and

  secondary graphite packing

  NACE MR.01.75 wetted parts and bolting as Standard

  Fire safe as standard construction ISO 10947 : 2004 and API607 : 3rd, 4th, 5th edition

  Fugitive emissions EN-ISO 15848-1

  SIL 3 (Safety Integrity level 3)

Trunnion mounted BV

  GATE VALVES   BOLTED BONNET

from Class 150 up to Class 2500

from 2’’ up to 36’’

  PRESSURE SEAL

from Class 900 up to Class 2500

from 2’’ up to 20’’

  GLOBE VALVES

  BOLTED BONNET

from Class 150 up to Class 2500

from 2’’ up 12’’

  PRESSURE SEAL

from Class 900 up to Class 2500

from 2’’ up to 16’’

  CHECK VALVES

  BOLTED COVER

from Class 150 up to Class 2500

from 2’’ up to 36’’

  PRESSURE SEAL

from Class 900 up to Class 2500

from 2’’ up to 20’’

Globe valves

Gate valves

Check valves

Technical description :

  From 2 in. up to 48 inches.   Motorized knife gate valves

  Design upon customer requests

  A unique design and technology

A unique design and highest performance technology

Example of special design KGV: russian project (2011).

  Thermal-chemical diffusion a unique technology to provide the highest level of performance.

Applications: ball valves, knife gate valves, sleeve bearings, all metal parts.

HT-65 : -  Hardener treatment of austenic steels -  Highly resistant to wear, seizure & corrosion -  Thermally stable up to 550°C / 1060°F -  Thermal-chemical diffusion protects material from expansion

Hardness comparison chart

 HT-2200

PROPERTIES & APPLICATIONS Extremely hard surfaces. Gives longer service life to valve parts. High abrasive wear and oxidation resistant properties. Thermally stable up to 870 °C/1600 °F.

Applications: ball valves, knife gate valves, sleeve bearings, all metal parts.

OTHER TECHNOLOGIES PROPOSED Non metallic seats as an alternative of metal seated valves: Our seats are non-porous as are Teflon based seats.  True-Hard 66 : up to 425°F/ +218°C  True-Therm 99: up to 625°F /+343°C

  G.E. CASE STUDY   Needs: safety automatic BV (trunnion mounted) with pneumatic control / failed close.   Environment: High temperature & G.E. Gas turbins   Results: we designed special actuated valves and made specific tests to assure long life guarantee

and no leakage; 15.000 cycles at high temperature (810°F/432°C). Leakage tests were even better then ANSI Class VI requirements.

We have been qualified by G.E. and specifications for all Gas Turbins are based on our approved high technology.

  PALL FILTRATION   Gas filtration specialist.

  Needs: an automatic BV- fast opening less than 500ms (Blow back system)   Environment: gas treatment plants   Solutions found by TRUELINE: Opposed piston type but with 4 pistons types construction

+external tubings + special solenoid mounting   Results: we reached an opening time of less than 300ms with 3.5bar air supply.

We can know also propose metal/metal design for high temperature and TH-66 seats.

Test results: 15.000 cycles @810°F.

  Main agreements & Oil and Gas customers:   SHELL Tests & MESC qualified   .R.G.B. (Belgium Gas) /nD.G. (Danish Gas) /nD.V.G.W. (German Gas)   ARAMCO Vendor Listed   ENAGAS, S.A. (Spain) nGas Natural SDG, S.A. (Spain)   Chevron Philipps   Dragon Oil (Turkmenistan)   DetNorskeVeritasAS (Norway)   EXXON (+ Kvaerner) ( North Sea)   General Electric   Czech Republic (Brno Institute)   Abu Dhabi Gas Liquefaction Company Ltd. (ADGAS)   Abu Dhabi National Oil Company (ADNOC)   TAKREER   Kuwait National Petroleum Company (KNPC)   Kuwait Oil Company (KOC)   PetróleoBrasileiro, S.A. (Petrobras)   Petróleosde Venezuela, S.A. (PDVSA)   Petroleum Development Oman (PDO)   Qatar General Petroleum Corporation (QGPC)   Repsol-YPF Group   Texaco   Gaz de France (North sea)…

JC Quality Assurance System   ISO 9001 : 2000 certified by BVQI   API Q1 certified by the AMERICAN - PETROLEUM INSTITUTE   PED 97 / 23 / EC certified by BVQI Products Approvals   API 6D certified by the AMERICAN - PETROLEUM INSTITUTE   CE Marking (Module H, Category III) in accordance with   PED 97 / 23 / EC certified by BVQI   Fire Safe ISO 10947 : 2004 certified by SGS   API 607 3rd., 4th. and 5th. Edition certified by SGS   BS 6755 Part 2 certified by Lloyd’s Register and SGS   RUSSIAN CERTIFICATES: GOST R & Rostekhnadzor   SIL 3 (Safety integrity level)   Atex   EN 13774 Environmental Certifications   ISO 14001 : 2004 certified by BVQI   ISO-EN 15848-1 certified by SGS

  TRUELINE VOSTOK 54, Bis boulevard Jean-Baptiste LEBAS 59000 LILLE / France http://www.truelinevostok.com   Sales director : Arianne Asselineau Mobile: +336 62904308   Sales area manager Africa : Vick Mackenzie Mobile: +33642285606   Chief Engineer: Vincent Dalmagne Office: +336 09 77 25 46