powrmatic control systems · lpg g20 - group h / g25 group l 35 sec fuel (standard) 28 sec fuel...

+ 4 4 ( 0 ) 1 4 6 0 5 3 5 3 5i n f o @ p o w r m a t i c . c o . u kw w w . p o w r m a t i c . c o . u k

Powrmatic pursues a policy of continues improvement in both design and performance of its products and therefore reserves the right to change, amend or vary specifications without notice. Whilst the details contained herein are believed to be correct they do not form the basis of any contract and interested parties should contact the Company to confirm whether any material alterations have been made since publication of this brochure.

Ireland Office

Get in touch

Powrmatic LimitedHort BridgeIlminsterSomersetTA19 9PS

tel: +44 (0) 1460 53535fax: +44 (0) 1460 52341e-mail: [email protected]: www.powrmatic.co.uk

United Kingdom OfficePowrmatic Ireland

45 Broomhill CloseTallaght

Dublin 24

tel: +353 (0) 1452 1533fax: +353 (0) 1452 1764

e-mail: [email protected]: www.powrmatic.ie

F O R T H E L A T E S T N E W S , C A S E S T U D I E S , A N D T E C H N I C A L S U P P O R T F O L L O W U S O N

#keepingthenationwarm

Powrmatic are a leading British manufacturer of industrial and commercial heating equipment. With over 60 years of experience in the HVAC industry, our

products are built with integrity, and characterised by high quality and energy-saving designs, delivering exceptional performance and facilitating

compliance with energy and emission regulations.

Powrmatic are also a specialist British manufacturer of natural, powered and smoke ventilation products working closely with a wide range of architects and consultants whilst also a supplier of a range of air conditioning and evaporative

cooling equipment.

We provide a full product application advice service for architects, mechanical engineers, installers and end users to ensure the best products are selected to meet the required budget, design and regulatory requirements. Our heating and ventilation engineers are also supported by distribution partners and a network of installers who are knowledgeable

in the supply, installation and maintenance of all of our equipment.

EURO-AIRQUALITYICOM

Energy Association

Powrmatic Control SystemsIndustrial & Commercial Heating Systems

Powrmatic pursues a policy of continuous improvement in both design and performance of its products and therefore reserves the right to change, amend or vary specifications without notice. Whilst the details contained herein are believed to be correct they do not form the basis of any contract and interested parties should contact the Company to confirm whether any material alterations have been made since publication of this brochure.

Powrmatic CPxI N D U S T R I A L & C O M M E R C I A L W A R M A I R H E A T I N G S O L U T I O N

Lorem ipsum dolor s i t amet, consectetur adipiscing el i t , sed do eiusmod tempor incididunt ut labore et dolore magna al iqua. Ut enim ad minim veniam, quis nostrud exercitat ion ul lamco laboris nis i ut a l iquip ex ea commodo consequat. Duis aute i rure dolor in reprehenderit in voluptate vel i t esse ci l lum dolore eu fugiat nul la par iatur. Excepteur s int occaecat cupidatat non proident, sunt in culpa qui off ic ia deserunt mol l i t anim id est laborum

C U S T O M E R B E N E F I T S

T Y P I C A L A P P L I C A T I O N S

• Warehouses• Factor ies• Garage Workshops• Distr ibut ion Centres• Aircraft Hangers

• Lorem ipsum dolor s i t amet

Lcon sectetur adipiscing el i t , sed do eiusmod tempor incididunt ut labore et dolore magna al iqua. •Duis aute i rure dolor in reprehenderit in voluptate vel i t esse ci l lum •

Lorem ipsum dolor s i t amet, consectetur adipiscing el i t , •Lcon sectetur adipiscing el i t , sed do eiusmod tempor incididunt ut labore et dolore magna al iqua. •

GAS

OIL

LPG

G20 - GROUP H / G25 GROUP L

35 SEC FUEL (STANDARD) 28 SEC FUEL (OPTIONAL)

PROPANE G31

I N D U S T R I A L & C O M M E R C I A L H E A T I N G C O N T R O L S O L U T I O N S

The MC200 is a digital, high specification controller for individual heaters that provides the flexibility of variable time and temperature control as well as optimised start/stop prediction. Adjustable frost protection, remote burner reset and summer fan-only operation are also included. All cabinet heaters are factory fitted with the MC200 control as standard.

The MC200 is a high specification heating controller that uses optimum start technology as standard. By monitoring the heating systems previous performance it can determine the optimum time to turn the heating on to raise the building temperature to the required level.

MC200 Optimised Start Control is designed for ease of use and to maximise the performance of your heating system controlling only unit heater.

Powrmatic MC200

Cabinet HeatersHeaters are supplied ready for automatic operation and are complete with safety and comfort controls. The Powrmatic CPx, VPC, TE are factory fitted with the MC200.

EconomyOne of the key energy-saving features of the MC200 is it’s ability to set a variety of time and temperature programs, including optimum start configuration with weather compensation. By monitoring the previous performance of the heater and taking account of ambient temperatures, the MC200 can determine the optimum time to turn the heating on. ‘Optimum stop’ can be con-figured to save energy at the end of the heating period.

The MC200 can provide direct control of both high/low and modulating burners – the latter via an internally generated 0-10V signal.

The user keypad and back-lit display allows easy selection of heating and fan-only modes, override functions and full reset. The MC200 will also provide a read-out of the burner’s operating hours to ensure servicing at appropriate intervals. When programmed with the correct data, it can also provide an indication of the running costs of the appliance.

FlexibilityThe MC200 has the ability to set a variety of time and temperature programs, whilst still enabling the user to adjust the temperature within controlled limits if required. Adjustable frost protection protects against low temperatures.

The MC200 also allows for remote burner lockout reset, and summer fan only operation.

2










GAS

OIL

LPG



PROPANE G31


Simple to use controls • Anywhere installation for convenient access •Security protected for authorised personnel •

Instant temperature adjustment •24/7 programmable temperature control •

Manufactured in the UK •

SecurityThe MC200 features password-controlled access, This can be locked in various combinations to allow different levels of password-controlled access. There are two levels of password-controlled access, the second level being for use by commissioning and servicing engineers. This provides access to parameters normally used only in the initial setting of the controller, accessing the fault log and resetting the system

Ease Of UseThe MC200 features an easy-to-use interface for selection of heating and fan-only modes, override functions and full reset.

Location When used with a remote sensor the MC200 can be sited wherever is convenient, such as in a manager’s office. If used with its internal temperature sensor, the unit should be located in a spot that is generally representative of the area to be heated. In such cases it should be sited 1.7m above floor level away from draughts and direct sources such as sunlight or heat emitters. It should also be in an easily accessible position for programming and operation.

ApprovalsAll Powrmatic controls are CE approved.

C O M P A T I B L E W I T H :

• NVx• NVS• OUH• CP+• Radiant (Linear & U-Tube)• CPX (factory fitted• VPC (factory fitted)• TE (factory fitted)

A P P R O V E D P R O D U C T

3

Need help with your control system? Check out our YouTube Channel for our helpful ‘How To’ tutorials.

4










GAS

OIL

LPG



PROPANE G31


Powrmatic’s new MC300 ‘Multi’ digital controller enables the control of multiple numbers of unit air heaters and features optimum start/stop with weather compensation, adjustable frost protection, remote burner reset and summer fan-only operation as standard.

A slave unit is factory fitted (additional cost) within each heater prior to delivery, which gives significant savings on the time and cost of installation. Further cost reductions are achieved through the use of low voltage control wiring (5-core for on/off, 6-core for high/low, 7-core for modulating units).

An easy-to-use interface facilitates setting of a variety of time and temperature programs, as well as the ability to adjust temperature within controlled boundaries if required. MC300 Multi software provides up to 14 time settings, each of which can be assigned to any single day of the week, or in groupings such as weekdays or weekends.

There are two levels of password controlled access, one for users and the other for commissioning and servicing engineers.

Powrmatic MC300 Multi

Multiple ConnectivityWhen controlling multiple heaters the MC300 Multi acts as the master unit and communicates with a factory-fitted PCB on each of the ‘slave’ heaters it controls, thereby reducing the cost and time of installation.

Further cost reductions are achieved through the use of low voltage control wiring (5-core for on/off, 6-core for high/low, 7-core for modulating units).

EconomyOne of the key energy-saving features of the MC300 is it’s ability to set a variety of time and temperature programs, including optimum start configuration with weather compensation. By monitoring the previous performance of the heater and taking account of ambient temperatures, the MC300 can determine the optimum time to turn the heating on. ‘Optimum stop’ can be configured to save energy at the end of the heating period.

The MC300 can provide direct control of both high/low and modulating burners. The user keypad and back-lit display allows easy selection of heating and fan-only modes, override functions and full reset.

The MC300 will also provide a read-out of the burner’s operating hours to ensure servicing at appropriate intervals. When programmed with the correct data, it can also provide an indication of the running costs of the appliance.

*The slave unit is factory fitted at an addtional cost

FlexibilityThe MC300 has the ability to set a variety of time and temperature programs, whilst still enabling the user to adjust the temperature within controlled limits if required and adjustable frost protection against low temperatures.

The MC300multi also allows for remote burner lockout reset, and summer fan only operation.

5










GAS

OIL

LPG



PROPANE G31


Simple to use controls • Anywhere installation for convenient access •Security protected for authorised personnel •

24/7 programmable temperature control •Instant temperature adjustment •


SecurityThe MC300 features password-controlled access, This can be locked in various combinations to allow different levels of password-controlled access. There are two levels of password-controlled access, the second level being for use by commissioning and servicing engineers. This provides access to parameters normally used only in the initial setting of the controller, accessing the fault log and resetting the system

Ease Of UseThe MC300 Multi features an easy-to-use interface for selection of heating and fan-only modes, override functions and full reset.

Location When used with a remote sensor the MC300 Multi can be sited wherever is convenient, such as in a manager’s office. If used with its internal temperature sensor, the unit should be located in a spot that is generally representative of the area to be heated. In such cases it should be sited 1.7m above floor level away from draughts and direct sources such as sunlight or heat emitters. It should also be in an easily accessible position for programming and operation.

ApprovalsAll Powrmatic products are CE approved.

C O M P A T I B L E W I T H :

• All Powrmatic warm air and radiant heaters



www.powrmatic.co.uk

MC300-MultiWARNING

Isolate the electric supplies to both the unit and the contolled equipment before remvoing this cover.

Heat Decrease Select Increase

Reset Fan Back Quit Next

X

+

www.powrmatic.co.uk

MC300-MultiWARNING




X

+

www.powrmatic.co.uk

MC300-MultiWARNING




X

+

www.powrmatic.co.uk

MC300-MultiWARNING




X

+

MC300 Multi Master Control

MC300 Multi Connectivity (optional)

www.powrmatic.co.uk

MC300-MultiWARNING




X

+

www.powrmatic.co.uk

MC300-MultiWARNING




X

+

www.powrmatic.co.uk

MC300-MultiWARNING




X

+

www.powrmatic.co.uk

MC300-MultiWARNING




X

+



The MC300 Multi can be connected to each heaters slave PCB in various ways depending on your application setup. The maximum cable length between each heater is 100m.

Unlike other multi zone systems, the MC300 Mutli setup keeps costs extremely low as the factory fitted slave PCB connects each heater and not by another slave controller.

Here are just a few examples of how multiple heaters can be connected with the MC300 Multi.

Unit Heaters Factory Fitted With Slave Unit



6

MC300 Multi Connectivity (optional)

www.powrmatic.co.uk

MC300-MultiWARNING




X

+

www.powrmatic.co.uk

MC300-MultiWARNING




X

+

www.powrmatic.co.uk

MC300-MultiWARNING




X

+

www.powrmatic.co.uk

MC300-MultiWARNING




X

+


www.powrmatic.co.uk

MC300-MultiWARNING




X

+

www.powrmatic.co.uk

MC300-MultiWARNING




X

+

www.powrmatic.co.uk

MC300-MultiWARNING




X

+

www.powrmatic.co.uk

MC300-MultiWARNING




X

+






7










GAS

OIL

LPG



PROPANE G31


The Powrtol RR are the rugged specification model. All controls are kept in a metal constructed box, giving you digital timed control, and twin day and night time temperature control.

The Powrtrol RR is designed for ease of use and to maximize the performance of your heating system controlling a single unit. The Powrtrol RR has the added benefit allowing for remote burner lockout reset.

The Powrtrol RR have a digital control allowing for 16 on/off programs throughout the weekly period.

The unit is fitted with twin dial thermostat enabling day and night(frost) temperatures to be easily adjusted. Both thermostats are securedaway and accessed by 2 screws.

Powrmatic Powrtrol RR

EconomyThe Powrtrol RR has a digital control allowing for 16 on/off programs throughout the weekly period. The unit has two separate thermostats each with a single dial. Both thermostats are secured away and accessed by 2 screws.

Ease Of UseThe Powrtrol features an easy-to-use interface for selection of heating and fan-only modes, override functions and full reset.

LocationThe Powrtrol RR unit should be located in a convenient spot that is generally representative of the area to be heated. It should be sited 1.7m above floor level away from draughts and direct sources such as sunlight or heat emitters. It should also be in an easily accessible position for programming and operation.

ApprovalsAll Powrmatic controls are CE approved.

Robust DesignThe Powrtrol RR is designed for a rugged life. With an all metal box construction and individually replaceable parts, a tough design which is easily repairable, gives the controller long life in a hostile environment.

Digital Time ControlsThe Powrtrol RR has a protected digital timer. The controls are simple to program and reset if any problems occur with your heating system.

SPARES ITEM ONLY AS OF JANUARY IST 2018 * SPARES ITEM ONLY AS OF JANUARY IST 2018

(spares item only as of January 1st 2018)

8











GAS

OIL

LPG



PROPANE G31

C U S T O M E R B E N E F I T S ( P O W R T R O L R R )

Simple to use controls for single unit • Anywhere installation for convenient access •

24/7 programmable temperature control •Instant temperature adjustment •


C O M P A T I B L E W I T H :• NVx• NVS• OUH• Radiant (Linear & U-Tube)• CPX (Standalone option for more basic control)• VPC (Standalone option for more basic control)• CP+ (Standalone option for more basic control)

Powrmatic Powrtrol RR

RBR Relay BoxFlexibility The RBR relay box allows you to control 2,4, or 6 heaters from a single MC200 or Powrtrol controller. Simply wire from the controller to relay boxes (RBR) and to continue to each heater to give full functionality.

(Connection diagrams are available on the next page)

Robust DesignThe RBR is designed for a rugged life. With an all metal box construction and individually replaceable parts, a tough design which is easily repairable, gives the unit long life in a hostile environment.

LocationThe RBR relay box is generally located near to the existing controller to ease connection and reduces wiring cost.

SPARES ITEM ONLY AS OF JANUARY IST 2018 * SPARES ITEM ONLY AS OF JANUARY IST 2018

9

RBR Relay Box


RBR Relay Box Connectivity (optional)

RBR OptionsThey are used to facilitate control of multiple units with one controller and are available as per the below:

• RBR2 - Control up to 2 units• RBR4 - Control up to 4 units• RBR6 - Control up to 6 units

Note:Each heater must be fitted with its own lockout reset button, if low level reset is required. (burner only)

Here are just a few examples of how multiple heaters can be connected with the MC200.

www.powrmatic.co.uk

MC300-MultiWARNING




X

+

RBR2

powrtrolwww.powrmatic.co.uk

5A

1A

www.powrmatic.co.uk

MC300-MultiWARNING




X

+


5A

1A

RBR4

www.powrmatic.co.uk

MC300-MultiWARNING




X

+


5A

1A

RBR6

RBR2

MC200 or Powrtrol

10

RBR Relay Box Connectivity (optional)

www.powrmatic.co.uk

MC300-MultiWARNING




X

+

RBR2


5A

1A

www.powrmatic.co.uk

MC300-MultiWARNING




X

+


5A

1A

RBR4

www.powrmatic.co.uk

MC300-MultiWARNING




X

+


5A

1A

RBR6

www.powrmatic.co.uk

MC300-MultiWARNING




X

+

RBR2


5A

1A

www.powrmatic.co.uk

MC300-MultiWARNING




X

+


5A

1A

RBR4

www.powrmatic.co.uk

MC300-MultiWARNING




X

+


5A

1A

RBR6

RBR4

RBR6

MC200 or Powrtrol

MC200 or Powrtrol

11

+ 4 4 ( 0 ) 1 4 6 0 5 3 5 3 5i n f o @ p o w r m a t i c . c o . u kw w w . p o w r m a t i c . c o . u k

Powrmatic pursues a policy of continues improvement in both design and performance of its products and therefore reserves the right to change, amend or vary specifications without notice. Whilst the details contained herein are believed to be correct they do not form the basis of any contract and interested parties should contact the Company to confirm whether any material alterations have been made since publication of this brochure.

Ireland Office

Get in touch

Powrmatic LimitedHort BridgeIlminsterSomersetTA19 9PS

tel: +44 (0) 1460 53535fax: +44 (0) 1460 52341e-mail: [email protected]: www.powrmatic.co.uk

United Kingdom OfficePowrmatic Ireland

45 Broomhill CloseTallaght

Dublin 24

tel: +353 (0) 1452 1533fax: +353 (0) 1452 1764

e-mail: [email protected]: www.powrmatic.ie

F O R T H E L A T E S T N E W S , C A S E S T U D I E S , A N D T E C H N I C A L S U P P O R T F O L L O W U S O N

#keepingthenationwarm

Powrmatic are a leading British manufacturer of industrial and commercial heating equipment. With over 60 years of experience in the HVAC industry, our

products are built with integrity, and characterised by high quality and energy-saving designs, delivering exceptional performance and facilitating

compliance with energy and emission regulations.

Powrmatic are also a specialist British manufacturer of natural, powered and smoke ventilation products working closely with a wide range of architects and consultants whilst also a supplier of a range of air conditioning and evaporative

cooling equipment.

We provide a full product application advice service for architects, mechanical engineers, installers and end users to ensure the best products are selected to meet the required budget, design and regulatory requirements. Our heating and ventilation engineers are also supported by distribution partners and a network of installers who are knowledgeable

in the supply, installation and maintenance of all of our equipment.

EURO-AIRQUALITYICOM

Energy Association

Issue 5.2 2018

powrmatic control systems · lpg g20 - group h / g25 group l 35 sec fuel (standard) 28 sec fuel...

Documents