pp04 liquidspresentation
TRANSCRIPT
-
8/3/2019 PP04 LiquidsPresentation
1/34
SOPREMA LIQUIDSSOPREMA LIQUIDS
INNOVATION FOR THEWORLDS TOMORROWS
-
8/3/2019 PP04 LiquidsPresentation
2/34
Soprema Liquid DivisionSoprema Liquid Division
What is PU? What is PMMA?
Why PU, Why PMMA, Why PU/PMMA?
Alsan Products for Waterproofing and
Roof Restoration
-
8/3/2019 PP04 LiquidsPresentation
3/34
What is PUWhat is PU
Polyurethane is an organic polymer.
"Polyurethanes are formed byreacting a polyol (an alcohol with
more than two reactive hydroxylgroups per molecule) with adiisocyanate or a polymeric
isocyanate in the presence of suitablecatalysts and additives."
-
8/3/2019 PP04 LiquidsPresentation
4/34
Polyurethanes are best known to the publicin the form of flexible foams: upholstery,
mattresses, earplugs, chemical-resistantcoatings, specialty adhesives and sealants,and packaging. It also comes to the rigidforms of insulation for buildings, waterheaters, refrigerated transport, andcommercial and residential refrigeration.
In general the shelf life of urethanes is from6 to 12 months.
-
8/3/2019 PP04 LiquidsPresentation
5/34
Chemical Make-UpChemical Make-Up
-
8/3/2019 PP04 LiquidsPresentation
6/34
WhyWhy
Urethane?Urethane?
High gloss and gloss retentionHigh elasticity and toughness at lowtemperatureWater permeabilityOutdoor durability-aliphatic urethanesWeatheringEnvironmental etch resistanceHydrolytic and UV light stabilityResistance properties:
AbrasionChemicalSolvent
Impact resistance
-
8/3/2019 PP04 LiquidsPresentation
7/34
What is PMMAWhat is PMMA
PMMA Polymethyl methacrylate-acrylate
Different polymer make-up than PUPMMA is a two-component methyl
methacrylate-based acrylic durable
resin.Faster curing
-
8/3/2019 PP04 LiquidsPresentation
8/34
Why PMMA?Why PMMA?
Fast cure Excellent adhesion on polar substrates
Hard, rigid, transparent, absorbs very littlevisible light
Good water resistance Good resistance to alkalis, salts and dilute acids
Good outdoor weather resistance
Organic solvent resistance is not as good as PU
PMMA liquids will have an extended shelf life
-
8/3/2019 PP04 LiquidsPresentation
9/34
PMMA Make-upPMMA Make-up
-
8/3/2019 PP04 LiquidsPresentation
10/34
Basic ApplicationsBasic Applications
-
8/3/2019 PP04 LiquidsPresentation
11/34
LIQUID PRODUCTSLIQUID PRODUCTS
Alsan RS 222 Primer - Generalsubstrates
Alsan RS 276 Primer - Concrete/woodAlsan RS 230 Field - Base Coats
Alsan RS 230 Flash - Base Coats
Alsan RS 260 LO* Field - Base CoatAlsan RS 260 LO* Flash - Base Coat
* LO = Low Odor
-
8/3/2019 PP04 LiquidsPresentation
12/34
ALSAN PRODUCTSALSAN PRODUCTS
Alsan RS 210 Binder for 223Alsan RS 240 LO Binder LOAlsan RS 223 PowderAlsan RS 233 Self Leveling MortarAlsan RS 263 LO Self Leveling MortarAlsan RS FleeceAlsan RS 288 Finish Color FinishAlsan RS 281 Finish Clear Finish
-
8/3/2019 PP04 LiquidsPresentation
13/34
ALSAN PRODUCTSALSAN PRODUCTS
Alsan RS Paste - Filler
Alsan RS Textured Coating
Alsan RS Detailer- FiberAlsan RS Catalyst Powder
Alsan RS LO Catalyst Powder
Alsan RS Liquid or Powder Thixo -Thickener
-
8/3/2019 PP04 LiquidsPresentation
14/34
Alsan Flashing RecoveryAlsan Flashing Recovery
SystemSystem
Minimum Coverage RatesCeramic Granules ToExcessAlsan Flashing 2.0-2.5 gal/sq.
min.Alsan Flashin 2.0-2.5 al/s .
-
8/3/2019 PP04 LiquidsPresentation
15/34
ALSAN FLASHING RECOVERYALSAN FLASHING RECOVERY
SYSTEMSYSTEM
10 year system
Cold applied polyurethane system
Prime as required by conditions thatmay effect the bond
Reinforced as required
Covered with ceramic granulesAllow 9 to 12 hours for each coat to
cure
-
8/3/2019 PP04 LiquidsPresentation
16/34
Alsan Grease Inhibitor SystemAlsan Grease Inhibitor System
Minimum Coverage RatesAlsan 500 FT 1.5 gal/sq. min.Alsan 500 2.0 gal/sq. min.Alsan H80 Primer 1.0
gal/sq. min.
-
8/3/2019 PP04 LiquidsPresentation
17/34
Alsan Grease InhibitorAlsan Grease Inhibitor
System UrethaneSystem Urethane
Two coat urethane-based system for applicationover SBS modified systems
Gravel and or debris must be removed
Reinforce all side and head lapsAllow 6 to 12 hrs for primer to cure
Allow 9 to 24 hrs for Alsan 500 to cure
Allow 12 to 24 hrs for Alsan 500 FT to cure
-
8/3/2019 PP04 LiquidsPresentation
18/34
Alsan RS Grease InhibitorAlsan RS Grease Inhibitor
SystemSystem
Minimum Coverage RatesAlsan RS Textured Coating 2.4 kg/m 2 min.(5.0 gal/sq.)Alsan RS 230 Field (top) 1.3 kg/m 2 min.
(2.6 gal/sq.)Alsan RS 230 Field (base) 2.0 kg/m 2 min.
-
8/3/2019 PP04 LiquidsPresentation
19/34
Alsan Grease InhibitorAlsan Grease Inhibitor
System PMMASystem PMMA
Three coat PMMA system for protectionof SBS membranes exposed tocontaminates.
Surface must be clean and dryReinforce all side and head laps
Allow 45 minutes each for the base and
top coat of 230 to cure.Allow 1 hour for the RS texture coat to
cure.
-
8/3/2019 PP04 LiquidsPresentation
20/34
Minimum Coverage RatesAlsan RS 288 Finish (top) 0.7 kg/m 2 min.(1.6 gal/sq.)Alsan RS 288 Finish (base) 0.4 kg/m 2 min. (0.7
gal/sq.)Alsan RS Primer 0.4 k /m 2 min. (1.0
Alsan RS Five-Year ParkingAlsan RS Five-Year Parking
SystemSystem
-
8/3/2019 PP04 LiquidsPresentation
21/34
Alsan 5 Year ParkingAlsan 5 Year Parking
System PMMASystem PMMA
High Performance two-component PMMA(methyl methacrylate) Rapid-curing flexibleacrylic resin
Alsan RS 276 Primer allow 30 minutesAlsan RS 288 Finish Allow 1 HR per coat cure
time
Allow a minimum 2 hours prior to any traffic
-
8/3/2019 PP04 LiquidsPresentation
22/34
Alsan RS Ten-Year BalconyAlsan RS Ten-Year Balcony
SystemSystem
Minimum Coverage RatesAlsan RS 288 Finish (top) 0.7 kg/m 2 min.(1.6 gal/sq.)Alsan RS 288 Finish (base) 0.4 kg/m 2 min. (0.7
gal/sq.)2
-
8/3/2019 PP04 LiquidsPresentation
23/34
Alsan 10 Year BalconyAlsan 10 Year Balcony
System PMMASystem PMMA
High Performance two-component PMMA(methyl methacrylate) Rapid-curingflexible acrylic resin
Alsan RS 276 Primer allow 30 minutes
Alsan RS 288 Finish Allow 1 HR per coatcure time
Allow a minimum 45 minutes prior toany traffic
-
8/3/2019 PP04 LiquidsPresentation
24/34
Minimum Coverage RatesAlsan RS 288 Finish (top) 0.7 kg/m 2 min.(1.6 gal/sq.)Alsan RS 288 Finish (base) 0.4 kg/m 2 min. (0.7gal/sq.)
Alsan RS 230 Field (top) 1.3 kg/m 2 min.(2.6 gal/sq.)
Alsan RS Twenty-Year BalconyAlsan RS Twenty-Year Balcony
SystemSystem
-
8/3/2019 PP04 LiquidsPresentation
25/34
Alsan 20 Year BalconyAlsan 20 Year Balcony
System PMMASystem PMMA
High Performance two-component PMMA(methyl methacrylate) Rapid-curing flexibleacrylic resin
Alsan RS 276 Primer allow 30 minutesAlsan RS 288 Finish Allow 1 HR per coat cure
time
Alsan RS 230 Field Allow 45 minutes curetime
Allow a minimum 45 minutes prior to anytraffic
-
8/3/2019 PP04 LiquidsPresentation
26/34
Alsan RS Twenty-Year RoofAlsan RS Twenty-Year Roof
SystemSystem
Minimum Coverage RatesAlsan RS 288 Finish (top) 0.7 kg/m 2 min.(1.6 gal/sq.)Alsan RS 288 Finish (base) 0.4 kg/m 2 min. (0.7gal/sq.)
Alsan RS 230 Field (top) 1.3 kg/m 2 min.
-
8/3/2019 PP04 LiquidsPresentation
27/34
Alsan RS 20-Year RoofAlsan RS 20-Year Roof
SystemSystemHeavy traffic non-skid surface
Alsan RS 276 Primer Rapid cure acrylicprimer. Allow 30 minutes to dry
Alsan 230 Field two component rapidcure flexible acrylic. Allow 45 minutesfor cure time
Alsan 288 Finish two component rapidcure flexible acrylic. Allow 1 hour forcure.
-
8/3/2019 PP04 LiquidsPresentation
28/34
Minimum Coverage RatesAlsan RS 230 Field (top) 1.3 kg/m 2 min.(2.6 gal/sq.)Alsan RS 230 Field (base) 2.0 kg/m 2 min. (4.1
gal/sq.)Alsan RS Primer 0.4 k /m 2 min. (1.0
Alsan RS Twenty-YearAlsan RS Twenty-Year
SystemSystem
-
8/3/2019 PP04 LiquidsPresentation
29/34
20 Year Roof or Balcony20 Year Roof or Balcony
SystemSystem 20 year heavy duty system
Alsan RS 276 Primer, allow 30minutes for cure time
Alsan RS 230 Field, allow 1 hour forcure time
Alsan RS FleeceAlsan RS 230 Field, allow 1 hour for
cure time
-
8/3/2019 PP04 LiquidsPresentation
30/34
Alsan MBSP Metal RoofAlsan MBSP Metal Roof
SystemSystem
Minimum Coverage RatesAlsan MBSP White 1.5gal/sq. min.
Alsan MSBS Grey 1.5 gal/sq.min.
Alsan MBSPWhiteAlsan MBSPGreyPreparedSubstrate
-
8/3/2019 PP04 LiquidsPresentation
31/34
Alsan MBSP Metal RoofAlsan MBSP Metal Roof
SystemSystem Single component blend of SEBS Resins
Solar reflective CRRC listed product
Spray applied
Odor Free
Allow 30 minutes cure time between coats
-
8/3/2019 PP04 LiquidsPresentation
32/34
Alsan MBSP EPDM RecoveryAlsan MBSP EPDM Recovery
SystemSystem
Minimum Coverage RatesAlsan MBSP White 1.5gal/sq. min.Alsan MSBS Grey 1.5 gal/sq.min.
-
8/3/2019 PP04 LiquidsPresentation
33/34
Alsan MBSP EPDM RecoveryAlsan MBSP EPDM Recovery
SystemSystem
Single component blend of SEBS Resins
Solar reflective CRRC listed product
Roller or spray applied
Odor FreeAllow 30 minutes cure time between coats
-
8/3/2019 PP04 LiquidsPresentation
34/34
Soprema presents one of the most complete lines of liquid systems available today.
THANKTHANKYOU!YOU!
For more information pleasecall:800.356.3521Or visit us on-line at:www.soprema.us