prastel - general catalogue

GENERAL CATALOGUE

2 0 1 3Access control

(Update under progress)

Anti-intrusion

Electronic devices forAutomatic systems

General sales conditions p. 87

TABLE OF CONTENTS

Stand-alone systems p. 4

Centralised systems p. 9

Readers and badges p. 15

Management software and p. 22

connection interfaces for control units

Power supplies p. 25

ACCESS CONTROL p. 3

Active infrared perimeter barriers p. 29

- for doors, windows and balconies - FSLIM range p. 31

- medium and large range (60-200 M) - PH range p. 38

INFRA columns p. 40

Power supplies p. 44

ANTI-INTRUSION p. 28

Radiocontrols p. 48

Control units p. 63

Photobeams p. 71

Safety edges p. 77

Flashing lights and key switches p. 79

Motion detectors p. 80

Metal detectors p. 83

ELECTRONIC DEVICES FOR AUTOMATIC SYSTEMS p. 47

3

u Stand-alone systems u EASYBKA/EASYBKA-WR p. 4 u EASYMINI p. 5 u EASY200 p. 6 u EASYBKED p. 7 u M1000E p. 8 u M2000PE p. 8

u Centralised systems u MT4000/2 p. 9 u MT10000/4 p. 10 u MT15000/2 p. 12

u Readers and badges p. 15

u Management software and connection interfaces for control units p. 22

u Power supplies p. 25

ACCESS CONTrOL

Prastel’s range of Access control offers a wide variety of products and technologies rang-ing from simple stand-alone systems to multidoor computer controlled access systems. Access control allows the restriction of access to users and authorised vehicles through any type of passageway (doors, gates garage etc) using devices such as badges, radio transmitters... For each installation, Prastel supplies the highest control level and the most adapted tech-nology for your project requirements.

4

EASYBKAEASYBKA-Wr

STAND-ALONE SYSTEMS

TECHNICAL SPECIFICATIONSPower supply: 12-24 Vac/dc Absorbed power: 145 mA max with heating 12 Vdc: 615 mA with heating 24 Vdc: 465 mA Relay capacity: 2 AMemory capacity: 500 codesMain input (Opening button): N.O. Auxiliary input: N.C./N.O. Operating temperature: from -20°C to +63°CProtection rating: IP 65 (EASYBKA) IP 54 (EASYBKA-WR)Dimensions and weight: 120 x 76 x 21 mm - 410 gAccessories available : see «Power supplies» p.25-26

Vandal-proof access control unit with blue backlight keypad, suit-able for outdoor use (resinate electronics), controls up to 500 users using 4-8 digit codes.

u Vandal-proofu Blue backlightu 2 output relaysu 2 two-colour warning LED + buzzer u Optical tamperu Selectable thermal heatingu Zama or stainless steel housing u 2 m cable (EASYBKA)u Terminal output (EASYBKA-WR)u Programming via keypad

ACCESS CONTROL

5

Real size

EASYMINI

MBPrO MISOPrOX MTAG TPrOXMPSDT2MBAD2

STAND-ALONE SYSTEMS

Miniaturized proximity reader which activates a relay after having recognised a proximity badge, previously registered. The output relay can be either impulsive or bistable. The device can be used outdoor (resinate electronics) and accommodates up to 200 cards or badges.

EASYMINI works with the following badges

Refer to the Compatibility table for readers/badges p. 15

Power supply: 12-24 VdcConsumption: 30 mA Reading technology: proximity, 125 KHz Range: 6 cm with «MBPRO» card, 3 cm with «MTAG» tagMemory capacity: 200 users N° output relays: 1 - monostable (1 sec.) or bistable, selectableRelay contact capacity: 2 A @ 60 Vdc (with inductive charge, use tension suppressors) Signals: LED two-colour (red/green) and buzzerOperating temperature: from -20°C to +55°CProtection rating: IP 67 Dimensions and weight: 28 x 92 x 12 mm - 165 gAccessories available : see «Power supplies» p.25-26

uMiniaturizedu200 usersuRange 3-6 cm depending on badge modelu1 relay outputu1 two-colour warning LED + buzzer uMagnetic tamperuABS box IP67 and 1 m cable

TECHNICAL SPECIFICATIONS

6

EASY200

EASY200

STAND-ALONE SYSTEMS

Control unit used to guarantee controlled access on a door, gate, automation etc, through the recognition of enabled cards.EASY200 accepts data from a reader in Wiegand format, 26/30/37 bit.EASY200 can directly control a lock, thanks to its integrated relay with 5A contact capacity and manages an internal memory of 250 users.

PROXIMITY KEYPADCONTACT MAGNETIC

READER/S

Power supply: 12-24 Vac/dcConsumption: Max. 80 mAInput data format: Wiegand 26/30/37 bitMemory capacity: 250 usersRelay output: 1 monostable or bistable, selectableRelay contact capacity: 5 AOperating temperature: from -20° to +55° CProtection rating: IP 44Dimensions and weight: 100 x 55 x 21 mm - 62 gSignals: LED two colour (Red/green)Accessories available : see «Power supplies» p. 25-26

u250 usersu1 input for readeru1 relay output 5A (N.O. + N.C.)u1 output 9 Vdc for reader power supplyuCode self-learning functionuMemory management using GTSYSTEMXP/GTKIT/ GTSUITE tolls and WINGTSYSTEM/WINGTPROG softwareuABS box


ACCESS CONTROL

7

EASYBKED

NEW

Relay outputs

Led

Programming button

Power supply 12-24 Vac/cc

12-24V NO COM NC +9V D0 D1 GND

1 9

u

u

STAND-ALONE SYSTEMS

uControl unit 250 users with 1 input for reader, 1 relay output 5A and 1 output 9 Vdc for reader power supplyuCode self-learning functionuMemory management with GTSYSTEMXP / GTKIT / GTSUITE and WINGTSYSTEM / WINGTPROG softwareuVandal-proof backlight keypad, resinate electronics, 2 m cableuData output Wiegand / Data clock

Wiring diagram for “EASY200” control unit and “EASYBKW” keypad

EASYBKED is a kit dedicated to the management of a single door, composed with an «EASY200» control unit and a «EASYBKW» vandal-proof keypad. This keypad solution with remotely housed electronics guarantees a high level of security.

8

M2000PE

Programming keypad

M1000E

Programming keypad

STAND-ALONE SYSTEMS

Access control unit fitted with 1 input for an external reader and a radio receiver integrated.

M1000E M2000PEPower supply: 12 -24 Vac/dc 12 -24 Vac/dcInputs: 1 receiver 433,92 MHz 1 receiver 433,92 MHz 1 Wiegand 26,30,37 bit input 2 Wiegand 26,30,37 bit inputsRelay outputs: 1 2 independentActivation time: time lag 1 - 180 s or bistable time lag 1 - 180 s or bistableRelay contact capacity: 5 A 5 AProgramming: with 4 keys and display with 4 keys and displayOperating temperature : from -20° to +55° C from -20° to +55° CProtection rating: IP 44 IP 44Dimensions and weight: 70 x 90 x 60 mm - 260 g 105 x 90 x 60 mm - 320 g

u999 usersu1 input for reader, control unit activation through 433MHz reader or transmitteru1 adjustable relay outputu433 MHz integrated receiveruIntegrated programming keypad and displayuUsers memory management with GTSYSTEMXP and WINGTSYSTEMuABS box with DIN rail mountableuInput for push-button

Access control unit with 2 inputs for external readers and a radio receiver integrated.

u2000 usersu2 inputs for reader, control unit activation through 433 MHz reader or transmitteru2 adjustable relay outputsu433 MHz receiver integrateduIntegrated programming keypad and displayuUsers memory management with GTSYSTEMXP and WINGTSYSTEM uABS box with DIN rail mountableuREX button inputuAnti-passback function


ACCESS CONTROL

9

u4,000 usersu2 inputs for readeru2,000 off-line eventsu2 relay outputsuSelf-learning function via softwareuABS box

MT4000/2

MT4000/2-M

NEW

CENTr ALISED SYSTEMS

MT4000/2 is an access control unit which is able to manage up to 4,000 users with an off-line events memory. It integrates 2 inputs for readers, 2 main relay outputs, 2 auxiliary inputs and 2 auxiliary outputs. The SWAMIGO2 management software performs the system configuration and the user programming.It is possible to apply the following limitations concerning the badge assignment:• limited number entries• entries in time slots• temporary validity of the badge

In order to manage more entries, the MT4000/2 can be connected to other MT series control units (control units network).

MT4000/2-M is a MT4000/2 control unit assembled in a metal box with a backup power supply 2A (battery excluded).

The MT4000/2 metal box protects the card from possible radio interferences and presents the following advantages:

Power supply: 12 Vac/dcConsumption: 100 mA Inputs for readers: 2Auxiliary inputs: 2, (2 adjustable as breaking inputs)Relay outputs: 2 main (5 A) and 2 auxiliary (500 mA)Protocols accepted: Wiegand 26, 30 (by default), 37 bit - Data clockTime slots: 16Holidays: 20 per yearAnti-passback: adjustableOperating temperature: from -20 °C to +55 °CProtection rating: IP 44Dimensions: 215 x 300 x 85 mmWeight: 1000 gAccessories available: see p.24

u Easy and fast installation : integrated power supply and pre-pierced box u 2 witness LED for mains supply and 1 front outputu Secured, weather-resistant and ventilated box (lock, piano hinges)

TECHNICAL SPECIFICATIONS MT4000/2

10

MT10000/4

MT10000/4-M

NEW


MT10000/4 is an access control unit which is able to manage up to 10,000 users with 16,000 off-line events memory. It integrates 4 inputs for reader, 4 main relay outputs, 4 auxiliary inputs and 4 auxiliary outputs. The SWAMIGO2 management software performs the system configuration and the user programming.It is possible to apply the following restrictions concerning the badge assignment:• limited number entries• entries in time slots• temporary validity of the badge

In order to manage more entries, MT10000/4 can be connected to other MT series control units (control units network).

MT10000/4-M is a MT10000/4 control unit assembled in a metal box with a backup power supply 2A (battery excluded).

The MT10000/4 metal box protects the card from possible radio interferences and presents the following advantages:

u10,000 usersu4 inputs by readersu16,000 off-line eventsu4 relay outputsuSelf-learning function via softwareuABS box

Power supply: 12 VdcConsumption: 200 mAInputs for readers: 4Auxiliary inputs: 4 (adjustable as monitored inputs/outputs)Relay outputs: 4 main (5 A) and 4 auxiliary (500 mA)Protocols accepted: Wiegand 26, 30 (by default), 37 bit - Data clockTime slots: 16Holidays: 20Anti-passback: adjustableOperating temperature: from -20 °C to +55 °CProtection rating: IP 44Dimensions: 215 x 300 x 85 mmWeight: 1140 gAccessories available: see p.24


u Easy and fast installation : integrated power supply and pre-pierced box u 2 witness LED for mains supply and 1 front outputu Secured, weather-resistant and ventilated box (lock, piano hinges)

ACCESS CONTROL

11

MT10000/4 board

max 100 m max 100 m max 100 m max 100 m

Max

100

0m

RS485


Wiring diagram for MT4000/2 and MT10000/4

The power supply for electronic locks, electric limits stops must be isolated from the power supply of the access control system. It is highly recommended to use some varistors or tension suppressors in order to avoid issues caused by these devices.

It is recommended to use a CAT. 5 cable, FTP or STP type for connecting control unit-reader and control unit-control unit.

keypad radio controlled proximity magnetic

Connection 1 to 32 control units

12

MT15000/2

MT15000/2-M

NEW


MT15000/2 belongs to the new generation of access control units which can manage up to 15,000 users and integrates a 15,000 off-line events memory. In order to manage more entries, MT15000/2 can be connected to extension modules MT15000/EXT4 (max. 10 modules for a control unit) or via a bus connection to other MT15000/2 control units (max. 64 control units).The software SWAMIGO3 performs the system configuration and the users programming.

Power supply: 9-14 VdcConsumption: 300 mA maxInputs for readers: 2Auxiliary inputs: 7Relay outputs: 3Time slots: 10 time slots per dayAutomatism: YesOperating temperature: from -20 °C to +50 °CDimensions: 157 x 108 x 30 mmWeight: 200 gAccessories available: see p.25

MT15000/2-M is an access control unit of MT15000/2 type in a metal box and a power supply with a backup battery 5A (batteries excluded).

The MT15000/2 metal box protects from possible radio interfer-ences and presents the following advantages:

u15,000 usersu15,000 off-line eventsu2 inputs per readeruBi-processor of new generation with redundancy functionuAnti-passback, anti-time backuManagement of simultaneous entries, countinguControl unit connection to PC via Ethernet : native TCP/IPuOpto-isolated RS485 extension busuFlash memory moduleuLED runninguGraphic supervisor

u Easy and fast installation: integrated power supply and pre-pierced boxu 2 witness LED for mains supply and 1 front outputu Secured, weather-resistant and ventilated box (lock, piano hinges)u The power supply can be common to the unit lock


ACCESS CONTROL

13

MT15000/EXT4

NEW

MT15000/EXT4-M

Ethernet

TCP/IP

MT15000/2Control unit

2 doors

SWAMIGO3Software

RS485 extension bus

RJ45

RJ45 or wired

RJ45 or wired

RJ45 or wired

MT15000/EXT4 extension modules (up to 10 modules)


MT15000/EXT4 is an extension module using for the management of 4 additional readers. In order to manage more entries, it is pos-sible to connect up to 10 MT15000/EXT4 modules to 1 MT15000/2 control unit, what allows to cover up to 42 readers.The software SWAMIGO3 performs the system configuration and the users programming.

Connection diagram for MT15000/2 control unit

Power supply: 9-14 VdcConsumption: 400 mA max Inputs for readers: 4Auxiliary inputs: 12Relay outputs: 4Time slots: 10 time slots per dayAutomatisms: yesOperating temperature: from -20 °C to +55 °CDimensions: 157 x 108 x 30 mmWeight: 200 g

u4 readers managementuUp to 10 modules installation for 1 control unituEthernet connection to the MT15000/2 via RJ45 connectoruRJ45 or wiring connection for extension modules uSelf-addressinguOpto-isolated extension bus

As MT15000/2 control unit, the MT15000/EXT4 extension module is also available in a metal box supplied with a power supply with a backup battery 5A (batteries excluded) : MT15000/EXT4-M.

TECHNICAL SPECIFICATIONS MT15000/EXT4

and MT15000/EXT4 extension modules

14

CONTrOL UNITS r ANGE

Managed by YES YES YES YES YES YES YESsoftware (codes (codes (codes archiving) archiving) archiving)

N° users 250 999 2,000 4,000 10,000 15,000 15,000

N° readers 1 1 2 2 4 2 4

Relay outputs 1 1 2 2 4 2 4

Additional - - - 2 4 1 -outputs

Events - - - 2,000 16,000 15,000 15,000memory

Anti-passback NO NO YES YES YES YES YES

Time slots NO NO NO YES YES YES YES

User NO NO NO YES YES YES YESgroups

Network NO NO NO Max 32 Max 32 Max 64 Max 10 forsharing 1 control unit

Keypad & NO integrated integrated NO NO NO NOdisplay

Ethernet NO NO NO Optional Optional YES YES

Integrated NO YES YES NO NO NO NO 433 MHz receiver

MT4000/2 MT10000/4M2000PEM1000EEASY200 MT15000/2 MT15000/EXT4

The MT4000/2 and MT10000/4 control units are connectable via 4 wires, manageable via the SWA-MIGO2 software and completely connectable to each other via RS485.

The MT15000/2 control unit and the MT15000/EXT4 extension modules are also connectable via TCP/IP network. They can be managed thanks to the SWAMIGO3 software.

15

rEADErS AND BADGES

rEADErS / BADGES COMPATIBILITY

BadgeReference

Proximity

MPROXMINI

Proximity

MEDIPROXMF

Magnetic

MRMAGINOX

Contact

ML2

Radio

MRRE

Keypad

EASYBKW

MBPRO • – – – – –

MISOPROX • – – – – –

MTAG • – – – – –

TPROX • – – – – –

MBAD2 • – • – – –

MCR20 – – – • – –

MPSDT2 • – – – • –

433 MHztransmitters

– – – – • –

CODE – – – – – •ISOPROMF – • – – – –

TAGPROMF – • – – – –

MDT2PROMF – • – – – –

TPROMF – • – – – –

Readers

The reader for access control systems is a device able to read the code programmed within an electronic key, and to send it to an access control unit.

Prastel proposes:• Magnetic strip readers• Contactreaders• Proximityreaders• Radioreaders(codetransmissionviatransmitter)• Codekeypads

For further information about PRASTEL transmitters, see the Radio transmitters range in the “Electronic devices for automatic systems” section of the catalogue, p. 48.

16

MPrOXMINI

“125 KHz” proximity technology

Tag

Proximity badges : MISOPrOXProximity tag ISO format, IP67

Dimensions & weight: 85x55x1mm-20g

MTAGProximity tagwith key-holder

Dimensions & weight: ø35x55 mm-20 g

TPrOXMiniaturized adhesive proximity chipDimensions & weight: ø20x0,8 mm-1 g

MBPrOProximity tag «CLAMSHELL» format, IP67


MPSDT22-channel transmitterwith dual technology: radio 433 MHz and integrated TPROX chip

MBAD2Proximity + magnetic tag, ISO2 format, IP67


MPROXMINI is a proximity reader with a data output in Wiegand or Data clock format. It can be connected to all PRASTEL access control units (max. range 100 m) which accept a Wiegand 26/30 bit or Data clock protocol. Each electronic component and internal antenna are put together in a completely resinated box so as to offer a high degree of weather resistance (IP67).

uMultiprotocol (Wiegand 26, 30 bit, Data clock)u125 KHz proximity read technologyuTwo-colour LED (red/green) + buzzeruABS box IP67 and resinated electronic u1 m cableuAverage reading range: 3/6 cm depending on badge model

Power supply: 12 VdcConsumption: 20 mAOperating temperature: from -20° to +55° CProtection rating: IP67Dimensions and weight: 28 x 92 x 12 mm - 40 g


rEADErS AND BADGES

ACCESS CONTROL

17

Magnetic and contact

MrMAGINOX

Magnetic badge :

ML2

ML2 works with MCr20 contact key :

MCr20DALLAS type digital contact key, IP67

Dimensions & weight: 20x62x8 mm-8 g

MBAD2Proximity + magnetic tag, ISO2 format, IP67


The MRMAGINOX reader for magnetic cards reads encoded data on magnetic strips on track 2, ISO standards compliant, and trans-lates them in Data and Clock signals.

ML2 is a reader for MCR20 key contact reader.It is compatible with all PRASTEL access control units (Wiegand 30 bit) and all control units which accept this protocol.

Power supply: 12 VdcConsumption: 8 mAOperating temperature: from -20° to +55 °CProtection rating: IP54Dimensions and weight: 73 x 80 x 33 mm - 260 g

uTwo-colour LED (red/green)u1 Wiegand output 30 bituReading head in stainless steeluABS box

Power supply: 12 Vdc Max. connection distance to MW30: 100 mConsumption: 10 mAOperating temperature: from -20° to +55° CProtection rating: IP55Dimensions and weight: 49 x 82 x 35 mm - 336 g

uMagnetic strip in ISO 7811 format, track 2uMW30 converter includeduVandal-proof box in stainless steelu2 LED (red/green) + buzzeruAverage lifetime of reading head > 1 000 000 readings



rEADErS AND BADGES

18

Keypads and radio remote

MrrE (433,920 MHz)

MrrE also works with : All PRASTEL

433 MHz

transmitters

EASYBKW

rEADErS AND BADGES

For further information about transmitters, see the Radio transmitters range in the «Electronic devices for automatic systems» section of the catalogue, p. 48.

Power supply: 12 - 24 Vac/dcConsumption: 30 mAOperating temperature: from - 20° to +55° CDimensions and weight: 140 x 110 x 40 mm - 230 g

EASYBKW is a vandal-proof keypad.The output in Wiegand format (by default Wiegand 30 bit) allows a connection to the major part of access control units present on the market.

Power supply: 12 VdcConsumption: 50 mA Protocol format: Wiegand 26/30 bit - Data clockOperating temperature: from -20°C to +55°CProtection rating: IP67Dimensions and weight: 120 x 76 x 27 mm - 410 g

uBlue backlituWiegand / Data clock data outputsuIntensive useuZama vandal-proof box, 2 m cableuResinate electronics


The MRRE radio receiver is intended to be connected to access control units. The code received from a transmitter is converted into a format compatible with the most major brands of access controller. This format is selectable by dip-switch.

uTransmitter channel addressuWiegand output protocol 26/30/37, Data clock, TTL, RS232uFrequency 433,920 MHz


ACCESS CONTROL

19

Dual technology : radio + proximity

Dual technology application diagram

Proximityradio

Events registration

Access control unit

rEADErS AND BADGES

20

MEDIPrOXMF

“MIFArE®” 13,56 MHz proximity technology

ISOPrOMFProximity tag ISO format, IP67

Dimensions: 85,6x54x0,8 mmWeight: 5,6 g

MDT2PrOMF2-channel transmitterwith dual technology:radio 433 MHz andintergrated TPROMF chip

TAGPrOMFProximity tag with key-holder

Dimensions & weight: ø35 x 55mm-20g

TPrOMFMiniaturized adhesiveproximity chip

Dimensions & weight: ø20x1,1mm-1g

Mifare® badges :

ISOPROMF TAGPROMF MDT2PROMF TPROMF Reading range: 5 cm 3 cm 3 cm proximity,100 m radio 3 cmMaterials: White PVC Blue ABS+metal Grey ABS, rubber keys White PVC

NEW

rEADErS AND BADGES

The new PRASTEL range of tags, transmitters and readers with MIFARE® technology securely and reliably protects any type of data from unauthorised access of an identification device, using secure keys and encrypted communication.

This technology guarantees:

uTwo-colour LED (red / green) + buzzeruABS box IP67, resinate electronics, 1 m cableu Reading range: 4/6 cm

Power supply: 9-15 VdcConsumption: 120 mACompatibility: MIFARE® ISO 14443 AFrequency: 13,56 MHz Operating temperature: from -20° to + 55° CProtection rating: IP65Dimensions and weight: 80 x 80 x 15 mm - 70 g



ACCESS CONTROL

21

VIGIPrOX2

VIGILIGHT2

“VIGIK®” proximity technology NEW

®

residents badgescompatible with VIGIPrOX2 :

rEADErS AND BADGES

VIGILIGHT2 is a control unit for management of a single door and access control for suppliers.

VIGIPROX2 is a control unit for the management of a single door with Wiegand 26 bit interface.It allows to control the access of :- various suppliers- residents: thanks to Wiegand 26 bit interface, the “MIFARE®” tags will be identified by access control units, EASY200, M1000E, M2000PE type and the complete MT range.

Power supply: 12 VdcConsumption: 300 mAOperating temperature: from -20° to +55 °CProtection rating: IP 52Dimensions: 78x57x24 mmWeight: 150 g VIGILIGHT2 / 200 g VIGIPROX2Accreditation number: PS 200306-01 / MS 200306-02


ISOPrOMFProximity tag ISO format, IP67

Dimensions: 85,6x54x0,8 mmWeight: 5,6 g

MDT2PrOMF2-channel transmitterwith dual technology:radio 433 MHz andintergrated TPROMF chip

TAGPrOMFProximity tag with key-holder

Dimensions & weight: ø35 x 55mm-20g

TPrOMFMiniaturized adhesiveproximity chip

Dimensions & weight: ø20x1,1mm-1g

Vigik® is a system which has been initially designed and devel-oped for access control of postmen in apartment buildings. It also allows to control the access of residents and various ser-vice suppliers (Telecom, Electricity provider...) according adjust-able time slots.

22

SWAMIGO2

For MT4000/2 and MT10000/4 control units

MANAGEMENT SOFT WArE

SWAMIGO2 is a Windows based software application developed to configure and manage MT4000/2 and MT10000/4 access con-trol units.

The software allows:u Configurationofoneormoresystemsviaserial(Com), Ethernet (TCP/IP) or modemu Management of up to 32 terminals per systemu 16 time slotsu Management of badges groupsu Display of on-line eventsu Download of off-line eventsu Reports generation and print of events and situation of badges assignmentu Restrictions on operators with access controlled by password

ACCESS CONTROL

23

SWAMIGO3/10SWAMIGO3/40SWAMIGO3/140

MT15000/2 control unit and MT15000/EXT4 module

MANAGEMENT SOFT WArE

u Display of one or more installationu Management of up to 840 doorsu Graphic supervisoru ACCESS or SQL databaseu Multi-desk (SQL)u Vocal synthesis for eventsu ON-LINE eventsu Groups managementu Creation of «Automatism» functionsu Management of up to 128 time slots

SWAMIGO3 is a Windows based software application developed to configure and manage MT15000/2 control units and MT15000/EXT4 extension module.

The software allows:

24

INT485USB

INTETHErNET

CONNEC TION INTErFACESFor MT4000/2 and MT10000/4 control units

The INT485USB interface allows to connect the PC to MT4000/2 and MT10000/4 access control units. The RS485 bus specifications allow data transmission up to 1000 m range.

Interface for connecting access control units (MT4000/2 and MT10000/4) via Ethernet network.

Power supply: Self (USB)Operating temperature: from -20° to +55° CConsumption: 15 mADimensions and weight: 75 x 53 x 20 mm - 20 g

Power supply: External adaptor 230 Vac/12VccProtocols supported: ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP, TFTP, HTTPSpeed: from 300 baud to 115 KbaudCertificates: CE, FCC A, TUV, C/ULOperating temperature: from -20° to +55° CDimensions and weight: 23 x 64 x 90 mm - 350 g



ACCESS CONTROL

25

POWEr SUPPLIES 13 VCC

ABM1-S1

ABM2-B2

ABM5-B2

ABM1-S1 ABM2-B2 ABM5-B2Input power supply: 230 Vac@50 Hz 230 Vac@50 Hz 230 Vac@50 HzOutput power supply: 1A@13 Vcc 2A@13Vcc 5A@13 Vcc Dimensions (mm): 185 x 265 x 80 330 x 330 x 86 330 x 330 x 86 Weight: 2,15 kg 4,00 kg 3,30 kg LED signals: Green : AC input in good working order Red : DC output in good working order

NEW

3 new power supplies with battery backup in metal box, with inte-grated battery charger, with transformer or switch-mode, for all access control units.

ABM1-S1: Power supply with battery backup with transformer 1A in metal box (batteries excluded)

ABM2-B2: Power supply with battery backup with transformer 2A in metal box (batteries excluded)

ABM5-B2: Switch-mode power supply with battery backup 5A in metal box with anti-opening and anti-removal tamper (batteries excluded).

u 2 witness LED for mains supply and front output 12V u Pre-pierced box for cables entry and wall-mountingu Box closing with secure keyu Weather-resistant piano hinges


2 front LED

Lock

Piano hinges and air ventilating

26

Ar2B

NEW

MBOX/TAMP

POWEr SUPPLIES 13 VCC

Switch-mode power supply with battery charger to be used for M and MT series access control units. Its output is protected from overcharging, short-cuts and accidental battery inversion. Easy integration thanks to its small dimensions and integrated DIN rail mounting.

Anti-opening tamper for assembled control units in metal box with integrated power supply:

uMT4000/2-MuMT10000/4-MuMT15000/2-MuMT15000/EXT4-M

MBOX/TAMP can be installed inside each new power supply in metal box:

uABM1-S1uABM2-B2uABM5-B2

Input voltage: 230 Vac + 10%Output voltage: 13,8 Vdc + 1 %Output current: 2 A maxIntegrated battery charger: 14,5 Vdc / 150 mAProtection: fusible 1,6 AL - 250 VacSignalisation: LEDOperating temperature: from -20 °C to +55 °CDimensions and weight: 52 x 100 x 64 mm – 250 g


ANTI-INTrUSION

28

u Perimeter barriers for doors, windows, balconies

FSLIMPRO p. 31 FSLIMRF - wireless p. 32

u Perimeter barriers for outdoor use, long range

PH line p. 38 INFRA - column support p. 40

u Power supplies p. 44

ANTI-INTrUSION

It is essential to protect a house and its precious valuable by preventing intrusions. We develop and manufacture infrared devices to make sure that the infrared barriers guarantee an optimum security and protect the most vulnerable parts of the house.

29

PRASTEL range of active infrared barriers offers several solutions:

INDOOR AND OUTDOORSECURITY

WALL-FLUSHINDOOr OrOUTDOOrPrOTECTION

OUTDOOrPrOTECTION

ACTIVE INFrArED PErIMETEr BArrIErS

The 2PH and 4PH lines offer products with high quality for professional protections when a long range is required.

All models can be installed independently or within INFRA columns.

For short range perimeter protection (doors, windows, balconies), Prastel has developed the innovative FSLIMPRO series.

FSLIMPRO is an IR barrier which can be adapted to any installation thanks to its easy use: its aluminium and polycarbonate profile allows to adjust and add beams as required without laying extra cables etc.

The FSLIMRF radio version maintains the same versatility and easy use as the FSLIMPRO. It differs thanks to its autonomy of use: - battery powered - alarm, low battery, tamper, supervision and alarm-end signal sent via radio using the FSLIMTX module.

By using the FSLIMOUT output relay module, the FSLIMRF barrier can be used with any existing alarm system via RF signal.

30

CodE FSLIMPRO FSLIMRF 2PH60C 2PH150A 4PH200A

n° BEAMS from 2 to 8 from 2 to 8 1 (double IR) 1 (double IR) 2 (double IR) (mobiles) (mobiles)

MAX IndooR 12 m 7 m 120 m with 300 m with 500 m withRAnGE 4 frequencies 4 frequencies 4 frequencies synchronism synchronism synchronism

MAX oUTdooR 10 m wall 5 m wall 60 m with 150 m with 200 m withRAnGE mounted mounted 4 frequencies 4 frequencies 4 frequencies synchronism synchronism synchronism

MULTIPLE Max 8 beams Max 8 beams Max 4 pairs Max 4 pairs Max 4 pairsUSE optical optical changing changing changing synchronism synchronism frequency (*) frequency (*) frequency (*)

THERMoSTAT - - With TERMPH With TERMPH With TERMPHConTRoL

dISqUALIFICATIon - - Gain control (#) Gain control (#) Included

ACCESSoRIES Column Column STIOR2 - -FoR MoUnTInG included includedon InFRA CoLUMn

ALIGnMEnT Self-aligning Self-aligning Optical viewfinder Optical viewfinder Optical viewfinder + Led + Buzzer and micrometric and micrometric and micrometric adjustments adjustments adjustments

oTHERS Additional Additional beams Kit for wireless Kit for wireless Kit for wirelessACCESSoRIES beams (FSLIMPLUS), alignment alignment alignment (FSLIMPLUS) batteries (BATF), (RF217) (RF217) (RF217) output modules (FSLIMOUT and FSLIMTX), receivers (FSLIMRFRX, FSLIMRX12 and FSLIMRTX)

Summary table of models


(*) See diagram p. 43 (#) The gain control automatically increases the power of the beam in order to compensate the atmospheric agents.

31

ANTI-INTRUSION

PATENTED

FSLIMPrO

FSLIMPrO05 L. 0,5 m - 2 beamsFSLIMPrO10 L. 1 m - 4 beamsFSLIMPrO15 L. 1,5 m - 4 beamsFSLIMPrO20 L. 2 m - 4 beamsFSLIMPrO25 L. 2,5 m - 4 beams

Barriers kit

FSLIMPrO accessories : FSLIMBASESK Base card with 2 beams for FSLIMPRO (2 transmitters + 2 receivers)

Dimensions

22 m

m25 mm


The FSLIMPRO active infrared barrier has been studied and manufactured in order to guarantee an easy and fast outer installation (balconies, windows, doors).The available in profiles from 0,5 to 2,5 m FSLIMPRO may be adapted to suit specific applications. The beams can be positioned at the desired height inside the FSLIMPRO in order to personalise the protection level.

uAnodisedaluminiumprofilewithpolycarbonatecoveruProfile can easily be cut to measure, to adapt, to suit the

height of the spaceuIntegrated electronics uMultiplex and synchronised system uExpandable up to 8 pairs of synchronised beams (with

additional FSLIMPLUS beams)uUpper cap in rubber, lower cap in ABS with drainage hole to

avoid condensation and insects intrusionuAnti-opening, tear-proof tampers excludible with jumperuEasy to install and align beams thanks to four levels of power

in the infrared transmissionuLED signals beam status (excludible with jumper)

Power supply: 12 VdcConsumption: Max 50 mA with 8 beams IR wavelength: 950 nmRange: 12 m indoor, 9 m wall-flushOutput contact: 1 N.O./N.C.Relay intervention time: from 100 ms to 1 s, adjustableRestore time: 0,5 sProtection rating: IP 55Operating temperature : from -10° to +55° CWeight: from 700g to 2500g depending on the model


FSLIMPLUSAdditional pair of beams (2 transmitters + 2 receivers)

32

FSLIMrF

PATENTED

Alarms radio transmission

Wireless


The FSLIMRF IR perimeter barrier is a wireless barrier which has been designed and developed for a fast and easy outer installation (balconies, doors, windows) and works independently with battery and data transmission via radio.

uPower supply with battery backup, around 2 years battery life (10 radio transmissions per day with 4 beams) uPossibility to connect a wired power supply 12 Vcc uProfilecaneasilybecuttomeasure,toadapt,tosuitthe height of the space uExpandable up to 8 pairs of synchronised beamsuEasy connection of additional pairs per connectoruAdjustment of reply time and intervention logic (dip-switch)uAnodisedaluminiumprofileandpolycarbonatecoveruUpper cap in rubber, lower cap in ABS with drainage hole to avoid condensation and insects intrusionuEasy installation and alignment of the barriers with a buzzeruWith the FSLIMTX module: 433,920 MHz radio transmission of signals: alarm, low battery, tamper, supervision, alarm end uWith FSLIMOUT module: 2 relay outputs for alarm and low battery signals for implementation on any existing alarm

33

ANTI-INTRUSION

RX

RX

TX

TX

TX

TX

RX

RX

Master Slave

FSLI

MBA

SESK

FSLI

MPL

US

FSLIMOUTOutput module 2 relay contactsConnected to MASTER:- alarm signal- tamper Master signalConnected to SLAVE:- Slave low battery signal- Slave tamper signal

BATFBattery 3,6 V - 2,7 Ahlithium thyonil chloride (pack of 2 batteries)

FSLIMTX5-channel Rolling code 433,92 MHz transmitter moduleConnected to MASTER:- alarm signal system- Master low battery- Master tamper- supervision system- alarm end

FSLIMPLUS Additional pair of beams(2 transmission + 2 reception)

FSLIMrF accessories :

Wireless

FSLIMrFO05 L. 0,5 m - 2 beams FSLIMrFO10 L. 1 m - 4 beams FSLIMrFO15 L. 1,5 m - 4 beams FSLIMrFO20 L. 2 m - 4 beams FSLIMrFO25 L. 2,5 m - 4 beams

Barriers kit

22 m

m

25 mm

Dimensions


The barrier can manage up to 8 beams (4 loops in total). It can be extended thanks to the FSLIMPLUS kit.

Power supply: 3,6V with 2 lithium thyonil chloride batteries AA 2,7Ah; alternatively 12Vcc power supply Battery life: 2 years, with 10 radio transmissions per day (4 beams)Outputs: with FSLIMTX: 433,92 MHz radio transmission, 5 channels with FSLIMOUT: 2 relays (NO/NC) for alarm and low battery Intervention time: 300 ms or 900 ms, selectable by dip-switch Alarm frequency: min. 20 sAlarm types: beam interruption, beam restore, low battery, supervisionOperating temperature: from -10° to +55° CRadio transmission range: 100 m in open environment, 50 m indoorProtection rating: IP 55Weight: 700g to 2600g depending on the barrier length


34

FSLIMrF

day

s

Temperature (in °C)

(4 IR)

3 beams(6 IR)

2 beams

4 beams(8 IR)

Batteries consumption

Wireless


The battery lifetime can vary in function of atmospheric elements and use conditions (ambient temperature...).

Theoretical battery lifetime depending on temperature and beams number

35

ANTI-INTRUSION

FSLIMrFrX

Programming keys

3 digits display

on/oFF remote control BFoR

MPSTP2E-XP

433,92 MHz ROLLING CODE

Wireless


Fitted with 4 output relays, an events memory of the last 10 alarms (with type alarm signal and barrier address), the FSLIMRFRX can manage up to 500 radio barriers and 30 remote controls. The programming of barriers and operating parameters is realised thanks to 4 keys and a 3 digits display.

Each barrier sends a 5-channel code to the receiver : intrusion, low battery, tampering, supervision (periodical signal of presence) and alarm end.

The receiver activates the relay corresponding to the alarm type and signals on the display device of the barrier the alarm type that has occurred.

Power supply: 10-14 Vdc Receiver: Superhetherodyne 433,920 MHz Memory capacity: 500 barriers 30 remote controls for on/off systemOutput relays: 4, respectively linked to alarm, low battery, tamper, supervision Relay contacts capacity: 1 ARelay output: time delayed from 1s to 180 s or bistable. each relay can be individually set up for a N.O./N.C. contactProgramming: keypad with 4 buttons, 3 digits displayProtection rating: IP 44 Dimensions and weight: 70 x 90 x 60 mm - 260 g

A transceiver allowing to increase the indoor range up to 70/80 m is available, code FSLIMRTX.

uProgramming via radio self-learning of barriersuIndividual deletion of barriers in the receiver memoryuTemporary disabling of a single barrieruProgrammable alarm relay in bistable modus (with alarm

end) or time delayed uAdjustable output mode (N.O./N.C.) with individual

activation time for all relays u10 events memory received (alarm, low battery, tamper,

supervision) uActivation/disactivation of supervision control on the systemuProgramming up to 30 remote controls for distant

activation and disactivation of the systemuABS box for indoor use with mounting on DIN rail


36

FSLIMrX12

FSLIMrTX

FSLIMRF FSLIMRTX

Max. 50 m indoorMax. 100 m outdoor

(in open zone)

Max. 50 m indoorMax. 100 m outdoor

(in open zone) FSLIMRX12or FSLIMRFRX receiver

Wireless


Receiver with radio/wire interface for FSLIMRF barriers(12 alarm areas + 4 technical areas)

Power supply: 10-14 VdcConsumption: 60 mASignals: 16 radio area LED (12 alarm areas + 4 technical areas) + buzzerMemory capacity: 30 peripheral (barriers + remote controls)Relay output: 12 relays max 0,1A@12 Vdc with N.O. / N.C. contactTechnical output: 4 relays max 0,1A@12 Vdc: Tamper – Low battery - Supervision – Radio jamming - Programmable contact N.O. / N.C.Inputs: Reset (Memory delation)Receiver: Supereterodine receiver, sensibility -105 db, 433,920 MHz frequency

Mains power supply: 230 VacBattery: 6V - 280 mAhAutonomy: 48 hSignals: red LED (ON/OFF) flashing orange LED (reception)Radio frequency: 433,92 MHz Rolling CodeDimensions and weight: 90 x 50 x 88 mm - 450 g

Repeater to amplify radio signal for FSLIMRF series, direct con-nection to 230 Vac.



37

ANTI-INTRUSION

FSLIMRTX

FSLIMRX12

FSLIMRFRX

Max + 50 mindoor use

30

FSLIMrF accessories application diagram

Wireless


1

5001

38

2PH150A

2PH60C - 2PH150A - 4PH200A accessories :

2PH60C

PH line


The PH line is a series of IR perimeter barriers, ideally used for a perimeter protection in indoor and outdoor large areas.

The PH line is composed of:- a barrier with max outdoor range of 60 m and a double beam IR - a barrier with max outdoor range of 150 m and a double beam IR- a barrier with max outdoor range of 200 m and a double beam IR

These barriers work on 4 different frequencies, selectable by dip-switch. They are fitted with aspheric lenses of high quality and a box with gaskets for an outdoor installation on a pole (fastening brackets supplied).

Barriers with a double IR beam - common specifications:ua double IR beamuSelectable transmission on 4 different frequenciesuWireless synchronisation (via IR)uAutomatic Gain Control (AGC)uAspheric lenses of high precisionu“Viewfinder”foropticalalignmentwithmicrometric adjustmentuBeam adjustment (from 0° to 180°)uBeam interruption time adjustmentuStand-alone use or inside INFRA column

u2PH60C: max. nominal range: indoor 120 m outdoor 60 m

u2PH150A: max. nominal range: indoor 300 m outdoor 150 m

TErMPHThermal kit for a pair of2PH60C, 2PH150A and 4PH200A (mounting outside INFRA column)

STIOr2 Brackets kit for theinstallation of a 2PH60C pair on INFRA column

rF217Kit for wirelessalignment of PH lineperimeter barriers

39

ANTI-INTRUSION

4PH200A

PH line


2PH60C 2PH150A 4PH200APower supply: 10,5-28 Vdc 10,5-28 Vdc 10,5-28 VdcConsumption: 45 mA 55 mA 77 mARelay intervention time: from 50 to 700 ms from 50 to 700 ms from 50 to 700 msAlarm activation: interruption of both beams interruption of both beams interruption of 4 beamsOutput relay: 1 N.O./N.C.alarm - 0,2 A@30 Vdc 1 N.O./N.C.alarm - 0,2 A@30 Vdc 1 N.O./N.C.alarm - 0,2 A@30 Vdc 1 N.O./N.C.tamper - 0,2 A@30 Vdc 1 N.O./N.C.tamper - 0,2 A@30 Vdc 1 N.O./N.C.tamper- 0,2 A@30 VdcAdjustment angle: horizontal 0 - 180°- vertical ± 10° horizontal 0 - 180°- vertical ± 10° horizontal 0 - 180°- vertical ± 10°Cable diameter supply: 2x0,75 mm2 for 5 m 2x0,75 mm2 for 5 m 2x0,75 mm2 for 5 m 2x2,5 mm2 pour 150 m 2x2,5 mm2 pour 150 m 2x2,5 mm2 pour 150 mSignal cable diameter: 2x0,22 mm2 for 150 m cable 2x0,22 mm2 for 150 m cable 2x0,22 mm2 for 150 m cable Protection rating: IP 55 IP 55 IP 55Operating temperature: from -20° to +55° C from -20° to +55° C from -20° to +55° CDimensions / weight: 75 x 180 x 75 mm - 1100 g 100 x 247 x 100 mm - 1800 g 100 x 390 x 100 mm - 3700 g

u2 double beams I.R. uTransmissions selectable on 4 different frequenciesuWireless synchronisation (via IR)uRelayoutputfordisqualificationuDoubleviewfinderforopticalalignmentwithmicrometric adjustmentuBeams adjustment from 0° to 180°uBeam interruption time adjustmentuStand-alone use or inside INFRA column

uMax. nominal range: indoor 500 m outdoor 200 m


40

A

B

C

INFrA

INFRAsection:

100 mm

120

mm INFrA10 L. 1 m

INFrA15 L. 1,5 mINFrA20 L. 2 mINFrA25 L. 2,5 mINFrA30 L. 3 m

Dimensions:

INFrA column

PErIMETEr BArrIErS

The INFRA column for infra-red perimeter barriers is made up of INFRA profiles in black anodised aluminium with polycarbonate cover. It is available in various lengths, from 1 to 3 m. By using appropriate accessories, it can be wall mounted, floor mounted or mounted on an underground mounting base.

Inside the INFRA column can be fixed:- 2PH60C beams with STIOR2 adaptor - 2PH150A and 4PH200A beams without adaptor

Recommended configuration for 1 column with wall-mounting:

u 1 INFRA columnu1 TAINFRA upper cap for columnu1 TINFRAB lower cap for columnusupports for wall mounting SUPINFRA : 2 pieces every 2 m of columnuthermal device TERMPH : 1 piece per beam

Recommended configuration for 1 column with direct floor mounting:

u 1 INFRA columnu1 TAINFRA upper cap for columnu1 FLINFRA flange for column : FLINFRA45 for column, max. height 2 m FLINFRA165 for column over 2 muthermal device TERMPH : 1 piece per beam

Recommended configuration for 1 column with underground mounting base:

u 1 INFRA columnu1 TAINFRA upper cap for columnu1 FLINFRA flange for column : FLINFRA45 for column, max. height 2 m FLINFRA165 for column over 2 mu1 BASEINFRA for columnuthermal device TERMPH : 1 piece per beam

41

ANTI-INTRUSION

TINFRABfor configuration :

BASEINFRAfor configuration :

FLINFRA45/165for configuration :

INFRA for configuration :

SUPINFRA for configuration :

TAINFRA for configuration :A B C

A

A B C

B C

C

A

Exploded view of INFrA column with all components :

INFrA column

PErIMETEr BArrIErS

42

A B C : see configuration on page 41

BASEINFrA C FLINFrA45

FLINFrA165

B C SUPINFrA A

TAINFrA A B C

TINFrAB APLINFrA15

PLINFrA20 A B C

PBINFrA

TErMPH A B C

Accessories for INFrA column

PErIMETEr BArrIErS

Base with inserts to becemented for undergroundINFRA fixing

Black polycarbonate 1,5 m height

Black polycarbonate 2 m height.

Transparentpolycarbonate30cm height + ring-nut forillumination or TVCC integration

Flange for 2m max height column for :udirect floor mountingumounting on BASEINFRA

Support for column wall mounting: 2 pieces every 2 m

Upper capin ABS withtamper andfootwear-resistant device

Lower cap in ABS for INFRA with tamper, condensationdrainage holeand cable clamp

Thermostat device for INFRA: 1 piece per beam

A B C

A B C

Flange for 2m max height column for :

udirect floor mountingumounting on BASEINFRA

43

ANTI-INTRUSION

Schematic layout for outdoor perimeter protection

Footwear-resistant cap

Frequency 1

Frequency 3

Frequency 2

Frequency 4

RX - 1° beam

TX - 2° beam

TX - 3° beam

RX - 4° beam

Single segment

Top views

Complete perimeter (4 sides)

“L” setting (2 sides)

double continuous segment

“C” setting (3 sides)

Beam positioningfor 180°

PErIMETEr BArrIErS

44

POWEr SUPPLIESNEW

ABM1-S1

ABM2-B2

ABM5-B2

ABM1-S1 ABM2-B2 ABM5-B2Input power supply: 230 Vac@50 Hz 230 Vac@50 Hz 230 Vac@50 HzOutput power supply: 1A@13 Vcc 2A@13Vcc 5A@13 Vcc Dimensions (mm): 185 x 265 x 80 330 x 330 x 86 330 x 330 x 86 Weight: 2,15 kg 4,00 kg 3,30 kg LED signals: Green : AC input in good working order Red : DC output in good working order

3 new power supplies with battery backup in metal box, with inte-grated battery charger, with transformer or switch-mode, for all access control units.

ABM1-S1: Power supply with battery backup with transformer 1A in metal box (batteries excluded)

ABM2-B2: Power supply with battery backup with transformer 2A in metal box (batteries excluded)

ABM5-B2: Switch-mode power supply with battery backup 5A in metal box with anti-opening and anti-removal tamper (batteries excluded).

u 2 witness LED for mains supply and front output 12V u Pre-pierced box for cables entry and wall-mountingu Box closing with secure keyu Weather-resistant piano hinges


2 front LED

Lock

Piano hinges and air ventilating

45

ANTI-INTRUSION

POWEr SUPPLIES

Ar2B

NEW

MBOX/TAMP

Switch-mode power supply with battery charger to be used for M and MT series access control units. Its output is protected from overcharging, short-cuts and accidental battery inversion. Easy integration thanks to its small dimensions and integrated DIN rail mounting.

Anti-opening tamper for assembled control units in metal box with integrated power supply:

uMT4000/2-MuMT10000/4-MuMT15000/2-MuMT15000/EXT4-M

MBOX/TAMP can be installed inside each new power supply in metal box:

uABM1-S1uABM2-B2uABM5-B2

Input voltage: 230 Vac + 10%Output voltage: 13,8 Vdc + 1 %Output current: 2 A maxIntegrated battery charger: 14,5 Vdc / 150 mAProtection: fusible 1,6 AL - 250 VacSignalisation: LEDOperating temperature: from -20 °C to +55 °CDimensions and weight: 52 x 100 x 64 mm – 250 g


47

u Radio controls p.48

u Control units p.63

u Photobeams p.71

u Safety edges p.77

u Flashing lights p.79

u Motion detectors p.80

u Metal detectors p.83

ELEC TrONIC DE VICES FOr AUTOMATIC SYSTEMS

For 30 years, PRASTEL has been investing its knowledge and technology in the domain of automatic systems. That has lead to the development of a range of electronic accessories dedicated to the control and the radio-control of gates, industrial doors, metal shutters and overhead doors.Each product, including full-custom versions, is designed and developed in a R&D department organized in conformity with the current European directives.

48

19831984

1991

1993

1996

1997

19981999

2003

2005

MPSTP2EXP

BFOR

20062008

r ADIO CONTrOLSThe evolution

For more than 25 years, PRASTEL has being showing crea-tivity and high quality knowledge in the radio control sector.

Forerunner in this domain, our company has conceived and developed major innovations.

Among the most significant :

Transmitters with dip-switch technology, 1024 combinations.

Transmitters with lateral buttons.

Prastel launches a new range of technology : the self-learning system of differentiated TX codes onto the corresponding receiver which is fitted with extractable memory modules (manageable from a terminal). Management of codes different from transmitter code, in the memory. That allows to use also radio controls for Access Control applications.

Prastel introduces the possibility to remotely control the registry of new transmitters on a RX with an enabled transmitter (R.P.A).

The MULTIPASS evolves to the more secure ROLLING-CODE. A variable code system that provides a unique code for each trans-mission, ensuring that Remote cloning is impossible.

Transmitters with multi-signalling LED (battery-saving, self-check-ing and optical transmission).

Transmitters with conductive rubber buttons and lithium batteries.

Transmitters with dual technology: 433,92 Mhz radio + 125 KHz proximity.

Easy-Roll system offers the possibility to add an installer code, a site code onto a radio control via radio (without opening the pack-aging), or to generate a transmitter copy.

“Remote Force Control“: RFC® function. This system allows a valid Prastel transmitter to vary the limit settings on the range of gate control boards. In an emergency or where weather condition prohibit normal use, RFC allows the gate force to be temporarily increased in order to guarantee its operation.

BFOR transmitter: 4 channels management with 3 buttons.

868 MHz radio controls.

As of today, Prastel has produced 12 million transmitters.

ELECTRONIC DEVICES FOR AUTOMATIC SYSTEMS

49

r ADIO CONTrOLS

Overview of models produced by Prastel since 1980:

2008 433,920 and 868 MHzradio controls ranges

2006

1980

1991

1995

2002

The evolution

50

Summary table of transmitters

PRodUCT FREqUEnCY CodE TYPE n° CodES n° CHAnnELS noMInAL PoWER RAnGE (m) SUPPLY

BFOr Rolling Code 1 million 4 100 m 1 lithium Easyroll (XP) battery 3V sequential CR 1616

MPSTP2E-XP Rolling Code 1 million 2 100 m 1 lithium Easyroll (XP) battery 3V sequential CR 2032

MPSTP3E-XP Rolling Code 1 million 3 100 m 1 lithium Easyroll (XP) battery 3V sequential CR 2032

MPSTF3E Dip switch 1024 3 100 m 1 lithium battery 3V CR 2032

MPSTL2E univoque 1 million 2 100 m 1 alkalineMPSTL4E EEPROM 4 battery 12V sequential type 23A

rADIOKEYB PIN code 5 digits 4 50 m Alkaline Keypad battery 9 V

MPSTP3S-XP Rolling Code 1 million 3 100 m 1 lithium Easyroll (XP) battery 3V sequential CR 2032

KMFT2P Dip switch 1024 2 100 m 1 alkalineKMFT4P 4 battery 12V type 23A

MPSTL2 univoque 1 million 2 100 m 1 alkaline MPSTL4 EEPROM 4 battery 12V sequential type 23A

433,920 MHz

868MHz

40,685 MHz

26,995 MHz

Transmitters

r ADIO CONTrOLS


51

Summary table of receivers

PRodUCT FREqUEnCY n° USERS TRAnSMITTER BoX n° CHAnnEL USABLE PoWER CoMPATIBILITY AnTEnnAS SUPPLY

Mr1E-XP 200 all ABS 1 433 MHz models

Mr2E-XP up to 1000 all ABS 2 (MR2E-XP) Mr4E-XP 433 MHz for 4 (MR4E-XP) models outdoor use

Mr2S-XP up to 1000 all ABS 2 (MR2S-XP) ANT868S 12/24 Vac/dcMr4S-XP 868 MHz for 4 (MR4S-XP) models outdoor use

Mr2F up to 1000 all ABS 2 (MR2F) ANT26.9 12/24 Vac/dcMr4F 26,995 MHz for 4 (MR4F) models outdoor use

Mr2 up to 1000 all ABS 2 (MR2) ANT40.6 12/24 Vac/dcMr4 40,685 MHz for 4 (MR4) models outdoor use

ANT433ANT433SANT433AV

433,920 MHz

868 MHz

26,995 MHz

40,685 MHz

12/24 Vac/dc

receivers

r ADIO CONTrOLS

52

433,920 MHz / 868 MHz transmitters and receivers

rOLLING CODE / EASYrOLL rADIO CONTrOLS

The Rolling Code is a system used to prevent replay attacks in order to guarantee a high level of security.A Rolling Code PRASTEL transmitter code is composed of a fixed code and a rolling code. The rolling code changes at each new impulsion following a previously registered algorithm into the transmitter. The receiver will be activated only if the rolling code transmitted from the transmitter matches with the algorithm.

The EASYROLL system offers the possibility to register without help of an on-site techni-cian, one or many transmitters.

EASYROLL system advantages :

• Automatic insertion of transmitters • Transmitters replacement with loss index • Transmitters programming (under blister) with GTSUITE • Remote management of all sites with WINGTPROG software • Possibility to create a pass allowing access to all sites

Common specifications for all Rolling Code/EASYROLL PRASTEL transmitters :

uLED with many signalsuNominal range 100 m (outdoor)u1 million variable code combinations, including sequential


53

Rolling Code transmitter, code management via EASYROLL func-tion. MPSTP2E-XP can be programmed via radio (proximity), with-out opening its blister packing, using the GTSUITE tool (see p.60).

uSequential codesu2 channelsuMicro-switch push buttonuBattery saver functionuKey-holder corduBlister pack of 5 pieces

BFOr

MPSTP2E-XP

rolling Code / Easyroll transmitters

433,920 MHz rANGE

Rolling Code transmitter, code management via EASYROLL function. BFOR can be programmed via radio (proximity), without opening its blister packing, using the GTSUITE tool (see p.60).

uNominalradiorange,100m(infreefield)u4 channels (with 3 keys)u2-colour LED: green for channels #1-2, red for channels #3-4uLED signal for low batteryuBattery saver functionuMicro-switch keysuSwivelling metal key-holderuSmall dimensionsuBlister pack of 5 pieces

Power supply: 1 lithium battery 3VConsumption: 20 mADimensions and weight: 37 x 56,5 x 8 mm - 20 g


Power supply: 1 lithium battery 3VConsumption: 20 mADimensions and weight: 38 x 58 x 12 mm - 25 g


54

uNominal radio range: 100 m (infreefield)uSequential codes u3 channels: 1 channel per buttonuLED signal for low batteryuNew micro-switch keysuBattery saver functionuKey-holder cord

uBlister pack of 5 piecesuCan be programmed via radio (proximity) without opening the blister packaging

MPSTP3E-XP

NEW


433,920 MHz rANGE

The MPSTP3E-XP transmitter with 3 channels is an evolution of the MPSTP2E.

EASYROLL functions remain the same as the MPSTP2E, allowing the integration of the «fixed code» and the «site code».Also MPSTP3E-XP can be programmed via radio (proximity), with-out opening its blister packing, using the GTSUITE tool (see p.60).

Micro-switchkeys

1 lithiumbattery

Power supply: 1 lithium battery 3VConsumption: 20 mADimensions and weight: 38 x 58 x 12 mm - 25 g

Key-holdercord



55

433,920 MHz transmitter, frontal keys, 3 channels.

uMicro dip-switch codeu1024 selectable codesuNominalradiorange100m(infreefield)uKey-holder ringuSupport for wall-mountinguCompatibility with all 433,920 MHz Prastel receivers

MPSTF3E

Standard transmitters

rADIOKEYB

MPSTL2EMPSTL4E

NEW

433,920 MHz rANGE

Power supply: 1 lithium battery 3VConsumption: 10 mA max during transmissionDimensions and weight: 63 x 32 x 120 mm - 15 g

433,920 MHz transmitter with lateral keys, 2 or 4 channels.

uUnivoque sequential EEPROM codeu1millionpredefinedcodes

Power supply: Alkaline 12V batteryConsumption: 20 mADimensions and weight: 75 x 38 x 15 mm - 48 g

4-channel 433,920 MHz numeric stand-alone keypad for radio transmission of codes (5 digits). RADIOKEYB is intended to activate different devices such as au-tomations, lights... with several individual codes. No wiring is required for its installation and it can be used ex-ternally. The front cover is fixed with a screw, and the keypad in semi-transparent conductive rubber is illuminated by LED.

u5 bit pin codeuAnti-break-in electronic container : access to electronics does not allow the control activation

Power supply: Alkaline 9V batteryConsumption: 0/30 mANominal range: 50 m (in free field)Signalisation: Illumination LED, buzzer Protection rating: IP 54Dimensions and weight: 73 x 80 x 33 mm – 160 g




56

ANT433S

ANT433AV

Antennas

NEW

ANT433

433,920 MHz rANGE

NEW

433,920 MHz tuned antenna with 2,5 m length cable.

433,92 MHz groundplane professional tuned antenna with 2,5 m length cable.

433,920 MHz tuned antenna, resinate vandal-proof box, with3 m length coaxial cable.

Stilo length: 220 mmBracket dimensions: 150 x 30 mmWeight: 200 g

Strand length: 220 mmWeight: 300 g

Protection rating: IP 65Dimensions and weight: 108 x 142 x 40 mm - 225 g





57

Mr2E-XP bicanalMr4E-XP quadricanal

NEW

Memory management and EASYrOLL function via connectors and PC (GTKIT p. 60)

Mr series new receiversGTKIT

Mr1E-XP

rolling code / Easyroll receivers

433,920 MHz rANGE

The new line of MR receivers offers compact and complete products with integrated memory (capacity of 1000 codes) and relay outputs (monostable, bistable or timed).

1-channel receiver, 200 codes, for indoor use, compatible with all standard transmitters, Rolling Code and EASYROLL with 433,920 MHz frequency.

Power supply: 12 - 24 Vac/dcAverage consumption: 20 mA in stand-byType of relay output: monostable, bistableContact capacity: 0,5 A @ 24 Vac/dcOperating temperature: from -20° to +55°CProtection rating: IP 44Dimensions and weight: 100 x 65 x 23 mm - 150 g

Power supply: 12 - 24 Vac/dcAverage consumption: 20 mA in stand-by 20 mA for each additional relayMemory capacity: 1000 codesRelay outputs: 2 (MR2E-XP) / 4 (MR4E-XP)Type of relay outputs: monostable, bistable and timed 200 s.Contact capacity: 0,5 A @ 24 Vac/dcOperating temperature: from -20° to + 55°CProtection rating: IP 55Dimensions and weight: 77 x 80 x 38 mm - 250



58

uNominal radio range: 100 m (infreefield)uSequential codes u3 channels: 1 channel per buttonuLED signal for low batteryuNew micro-switch keysuBattery saver functionuKey-holder cord

uBlister pack of 5 piecesuCan be programmed via radio (proximity) without opening the blister packaging

MPSTP3S-XP is the new 868 MHz transmitter with 3 channels.

EASYROLL functions remain the same as the MPSTP2E, allowing the integration of the «fixed code» and the «site code».Also MPSTP3S-XP can be programmed via radio (proximity) with-out opening its blister packing using the GTSUITE tool (see p.60).

MPSTP3S-XP

NEW


868 MHz rANGE

Power supply: 1 lithium 3 V batteryDimensions and weight: 38 x 58 x 12 mm - 25 g



59

rolling Code / Easyroll receivers and antennas

Mr2S-XP bicanal

Mr4S-XP quadricanal

NEW

NEW

868 MHz rANGE

ANT868S ANT868S is a 868 MHz single stranded tuned antenna with a 2,5 m coaxial cable, impedance 50 Ohm. The 868 MHz frequency allows to reduce the antenna dimen-sions, what makes it less visible.

Power supply: 12 - 24 Vac/dcAverage consumption: 20 mA in stand-by 20 mA for each additional relayMemory capacity: 1000 codesRelay outputs: 2 (MR2S-XP) - 4 (MR4S-XP)Type of relay outputs: monostable, bistable or timed 200 s.Contacts capacity: 0,5 A @ 24 Vac/dcOperating temperature: de -20° à +55°CProtection rating: IP 55Dimensions and weight: 77 x 80 x 38 mm - 250 g

The new line of MR receivers proposes compact and complete products with integrated memory of 1000 codes and relay outputs (monostable, bistable and time delay).

Frequency: 868 MHzCable: 2,5 mStilo: 150 mmBracket dimensions: 150 x 30 mmWeight: 230 g



60

The GTPROG programmer allows to perform all reading and writ-ing operations onto memories of MM-LOGIC-MR-XP series, UNIK control units and transmitters, and onto memories (extractable or on board) of new MR series receivers.The programmer is also fitted with a 125 KHz reading head for reading proximity badges (MBPRO, MISOPROX, MTAG and TPROX), and an interface for wireless programming of XP series transmitters.It can be directly connected to the USB port on the computer. All operations are managed via the WINGTPROG software. For simple copy operations between memory modules, the GT-PROG can operate independently, without connection to a PC us-ing its internal 9V battery.

GTSUITE kit is composed of :

1 GTPROG programmer

2 interfaces

1 USB cable

1 WINGTPROG management software

Transmitters and memory programmers

433,920 MHz / 868 MHz ACCESSOrIES

GTSUITE

GTKIT

NEW

NEW

Power supply : 5 Vdc, for USB port + internal 9V batteryMicromatch connectors for MM-LOGIC-MR-XP series-UNIK units memoriesMicromatch connectors for memories of new MR receivers125 kHz reading interface for proximity badgesInterface for wireless programming of XP series transmittersDimensions and weight : 210 x 140 x 60 mm - 600 g

The GTKIT allows to perform all reading and writing operations onto extractable MM-LOGIC-MR and XP series memories, on-board memories and onto the memories of new MR series receivers. It can be connected to the USB port on the computer. All operations are managed via the WINGTPROG software.

GTKIT kit is composed of :2 interfaces1 USB cable1 WINGTPROG management software

Dimensions and weight: 145 x 130 x 55 mm - 300 gTECHNICAL SPECIFICATIONS



61

Transmitters, receivers and antennas

26,995 MHz rANGE

Mr2F bicanal

Mr4F quadricanal

NEW

NEW

ANT26.9

KMFT2PKMFT4P

26,995 MHz dip-switch transmitter with lateral keys, 2 or 4 chan-nels, 1024 selectable codes.

uMetal clipuABS boxuLED

26,995 MHz compact and complete receiver, with integrated memory and relay outputs (monostable, bistable or timed).

uMemory capacity up to 1000 codes uPreassembleduABS box for outdoor use

Stilo length: 300 mmDimensions: 150 x 30 mmWeight: 250 g

Power supply: Alkaline battery 12VConsumption: 20 mAChannels: 2 (KMFT2P) / 4 (KMFT4P)Dimensions and weight: 35 x 80 x 12 mm - 45 g

Power supply: 12-24 Vac/dcAverage consumption: 20 mA in stand-by 20 mA for each additional relayRelay outputs: 2 (MR2F) / 4 (MR4F)Type of relay outputs: monostable, bistable and timed 200 s.Contacts capacity: 0,5 A @ 24 Vac/dcOperating temperature: from -20 to +55 °CProtection rating: IP 55Dimensions and weight: 77 x 80 x 38 mm - 250 g

26,995 MHz single stranded tuned antenna with a 2,5 m length cable.




62

MPSTL2MPSTL4

40,685 MHz rANGE

Mr2 bicanal

Mr4 quadricanal

NEW

ANT40.6

NEW

Transmitters, receivers and antennas

40,685 MHz transmitter with lateral keys, 2 or 4 channels, unique EEPROM code, 1 million predefined codes.

uABS box and rubber keys

40,685 MHz compact and complete receiver, with integrated memory and relay outputs (monostable, bistable or timed).

uMemory capacity up to 1000 codes uPreassembleduABS box for outdoor use

Stilo length: 250 mmDimensions: 150 x 30 mmWeight: 200 g

Power supply: Alkaline battery 12VConsumption: 20 mAChannels: 2 (MPSTL2) / 4 (MPSTL4)Dimensions and weight: 75 x 38 x 15 mm - 48 g

40,685 MHz single stranded tuned antenna with a 2,5 m length cable.

Power supply: 12-24 Vac/dcAverage consumption: 20 mA in stand-by 20 mA for each additional relayRelay outputs: 2 (MR2) / 4 (MR4)Type of relay outputs: monostable, bistable and timed 200 s.Contacts capacity: 0,5 A @ 24 Vac/dcOperating temperature: from -20 to +55 °CProtection rating: IP 55Dimensions and weight: 77 x 80 x 38 mm - 250 g




63

CONTrOL UNITSGeneral characteristics

THE COrE OF AUTOMATIONThe control unit is a micro-processor electronic panel which allows the management of an electro-mechanical automatic gate, overhead or sectional door, shutter, industrial door...

The PRASTEL control units range is composed of :

u UNIK lineuSEr line

UNIK line

Fitted with a “FLASH” 32 K - 8-bit micro-processor, UNIK con-trol unit is able to manage the automation of one-or two- 12 Vdc (24 Vdc with optional transformer) / 230 Vac motor pow-ered gate, with self-learning limit settings and adjustment via on-board trimmers:

• force/speed• sensitivity/obstacledetectiontriggertime• pausetime• secondmotordisplacement(2-motorversion)• RFC®:remotemodificationofmotorforce

SEr line

The SER line of control units has been specially designed for managing shutters or blind automations.

64 • : standard - : not included : optional accessory

Unit model UNIK1E UNIK2E UNIK1E230 UNIK2E230

TECHNICAL CHARACTERISTICS Unit power supply (Vac) 230 230 230 230 Transformer power (VA) 100 100 10 40 Motor power supply 12 Vdc (24 Vcc) 12 Vdc (24 Vcc) 230 Vac 230 Vac Motors and power management (watts) 1x100 2x50 1x400 2x400 Accessories power supply (mA) 400 250 150 500 Outdoor operating temperature -20° ÷ +55°C -20° ÷ +55°C -20° ÷ +55°C -20° ÷ +55°C Protection rating IP 54 IP 54 IP 54 IP 54 Dimensions (mm) 215 x 300 x 85 215 x 300 x 85 215 x 300 x 85 215 x 300 x 85 Weight (g) 2770 2850 2770 2850

MAIN CHARACTERISTICS Removable inputs/outputs • • • • Emergency battery input • • – – Solar panel input • • – – Opening/closure limit switch inputs 1 +1 • 2 + 2 • 1 + 1 • 2 + 2 • 12V 15W eletric lock • Courtesy light Slow motor startup (soft start) • • – – Motors starting peak (max. current) – – • • 433,920 MHz Rolling Code receiver, 180 codes • • • • Easyroll radio system • • • • Connector for GTSYSTEM terminal • • • • LOGIC AND FUNCTIONS ADJUSTABLE BY DIP-SWITCH Operating logic • • • • Automatic step by step Step by step with automatic closure Human presence function – – – – Flash type setting • • • • Auto-test for safety function setting • • • • Fast re-closure setting upon photocell clearing • • • • Strike setting for electric lock release • • • • Transmitter key assignment setting for total or partial opening (pedestrian function) • • • • ADJUSTABLE FUNCTIONS Customized opening and closure work time • • • • Motor force and speed adjustable between 50 and 100% • • • • Adjustable slow-down time in opening and closure • • • • Adjustable slow-down speed • • • • Adjustable partial opening time (pedestrian) • • • • Pause time via trimmer adjustable from 0 to 60 seconds • • • • Obstacle detection trigger time adjustable from 0,1 to 3,0 seconds • • • • EXTRA RFC® FUNCTION ACTIVATION RFC® function activation, remote opening and closure at max. force with transmitter (input/output emergency) • • • • SIGNAL AND STATUS LED Learning status and radio code programming • • • • Card error • • • • Mains presence and gate status (open or closed) • • • • Safety status (photocells and stop) • • • •


65


Unit model UNIK1E24 UNIK2E24 SEr30E

TECHNICAL CHARACTERISTICS Unit power supply (Vac) 230 230 230 Transformer power (VA) 100 100 2 Motor power supply 24 Vcc 24 Vcc 230 Vac Motors and power management (watts) 1x120 2x60 1x500 Accessories power supply (mA) 400 250 90 Outdoor operating temperature -20° ÷ +55°C -20°÷ +55°C -20° ÷ +55°C Protection rating IP 54 IP 54 IP 54 Dimensions (mm) 215 x 300 x 85 215 x 300 x 85 108 x 142 x 40 Weight (g) 2770 2850 450

MAIN CHARACTERISTICS Removable inputs/outputs • • fixed Emergency battery input 12 Vac battery 12 Vac battery – Solar panel input – – – Opening/closure limit switch inputs • • • 12V 15W electric lock – Courtesy light – Slow motor startup (soft start) • • – Motors starting peak (max. current) – – – 433,920 MHz Rolling Code receiver, 180 codes • • 50 Easyroll radio system • • • Connector for GTSYSTEM terminal • • •

LOGIC AND FUNCTIONS ADJUSTABLE BY DIP-SWITCH Operating logic • • • Automatic step by step Step by step with automatic closure Human presence function – – – Flash type setting • • Auto-test for safety function setting • • – Fast re-closure setting upon photocell clearing • • – Strike setting for electric lock release • • Transmitter key assignment setting for total or partial opening (pedestrian function) • • –

ADJUSTABLE FUNCTIONS Customised opening and closure work time • • • Motor force and speed adjustable between 50 and 100 % • • – Adjustable slow-down time in opening and closure • • – Adjustable slow-down speed • • – Adjustable partial opening time (pedestrian) • • – Pause time via trimmer adjustable from 0 to 60 seconds • • • Obstacle detection trigger time adjustable from 0,1 to 3,0 seconds • • –

EXTRA RFC® FUNCTION ACTIVATION RFC® function activation, remote opening and closure at max. force with transmitter (input/output emergency) • • –

SIGNAL AND STATUS LED Learning status and radio code programming • • • Card error • • – Mains presence and gate status (open or closed) • • • Safety status (photocells and stop) • • –


All UNIK board have the same dimensions : 125 x 94 x 38 mm.

66

UNIK line

RFC®

CONTrOL UNITS

PATENTED

In compliance with EN 12453 DM, the door/gate must be actu-ated with limited forces. In case of strong wind, snow, etc, these forces may be insufficient toopen or close the gate. By us-ingtheRFC®function(RemoteForce Control) via our transmit-ter (watching the door/gate). Our control unit will set the nec-essary force and obstacle de-tection to allow the opening and closure of the gate. After this, the control unit will restore the pre-set parameters.

MAIN CHArACTErISTICS

The UNIK line, designed for managing the major part of automations, is fitted with:

• Fast programming, in which the unit automatically runs the manoeuvre-time learning manoeuvre fixing the beginning of the slow-down point for both opening and closing.• Professional programming allows installers to fix the wing slow-down point, enabling pedestrian access, safety devices trigger mode.• Control unit for automating one or two 12/24 Vdc or 230 Vac motors

• Removable professional terminal board• Dual entry for open/close limit switch• Charger included for buffer battery 12V (maxi 7A)• Softstart for 12 V line (slow motor startup)• Starting peak for 230 Vca motors• 433,920 MHz rolling-code receiver, 180 codes

Logic and functions adjustable via DIP-SWITCH(initialconfiguration)• Operating logic : step by step with automatic closure• Safety auto-test• Flashing light mode• Output for electric lock release• Assignment of radio control key function, total and partial

opening (pedestrian)

LED signal and status

• LED signal for learning status and radio code programming• LED signal for card operating error• LED signal for gate status (open – closed) and mains presence• LED signal for safety status (photocells and stop)

Additional functions

• Motor speed adjustable via trimmer from 50 to 100 %.• Pause time adjustable via trimmer from 0 to 60 seconds• Obstacle detection trigger time adjustable via trimmer from 0,1 to 3,0 seconds• Partial opening in learning phase customised• Work times adjustable by opening and closure in learning phase• Slow-down times by opening and closure set in learning phase• Slow-down speed adjustable by opening and closure in learning

phase via GTSYSTEM• Maximum force RFC® activation function with transmitter (Input/Output emergency)

67


Self-learning, 1 or 2 motors - 12 Vdc, 24 Vdc, 230 Vac

Control unit for motor 12 VDCUNIK1E

UNIK2E

UNIK1E230

UNIK2E230

UNIK1E24UNIK2E24 Self-learning control unit for 1 motor 24 Vdc, with built-in

433,920MHz receiver and 100 VA transformer. ABS box.

Self-learning control unit for 1 motor 12 Vdc, with built-in 433,920MHz receiver and 100 VA transformer.ABS box.

Self-learning control unit for 1 motor 230 Vac, with built-in 433,920MHz receiver and 10 VA transformer. ABS box.

Self-learning control unit for 1 or 2 motors 230 Vac, with built-in 433,920 MHz receiver and 40 VA transformer. ABS box.

Self-learning control unit for 1 or 2 motors 24 Vdc, with built-in 433,920 MHz receiver and 100 VA transformer. ABS box.

Self-learning control unit for 1 or 2 motors 12Vdc, with built-in 433,920 MHz receiver and 100 VA transformer. ABS box.

Control unit for motor 230 VAC

Control unit for motor 24 VDC

CONTrOL UNITS

68

UNIK1E (1 motor)UNIK2E (2 motors)

UNIK1E24 (1 motor)UNIK2E24 (2 motors)

UNIK line

CONTrOL UNITS

Self-learning control unit 12 Vdc, 433,920 MHz receiver. The UNIK control units are available in several versions: - as board only, no housing or transformer (UNIK1ESK and UNIK2ESK)- with bow and 100 VA transformer (UNIK1E and UNIK2E)

Self-learning control unit, 24 Vdc, with built-in 433,920 MHz receiver. 100 VA transformer - ABS box.

LED ER GO CC PH ST

BORNES pour fin de course

POTENTIOMETRES Force vitesse

Temp de pause

Contrôle obstacle

Déphasage battants

BORNIER professionnel

amovible

DIP-SWITCHDIP1 DIP2/3 DIP4 DIP5 DIP6 DIP7/8

Bouton START pour manœuvre d'OUVERTURE

Bouton de programmation radiocommandes

Bouton de programmation rapide

ErreurPortail ouvertPortail ferméEtat de la photocelluleEtat du contact STOP

-----

Autotest photocellules Fermeture automatique Pas à pasPas à pas + fermeture automatique Logique clignotantActivation coup de bélierFermeture immédiate au passage photocellules Attribution fonction ouverture totale ou piétonne aux canaux 1, 2, 3 ou 4 de l'émetteur

-

------

Quick programming button

Radio controlsprogramming button

START button for OPEN manoeuvre

DIP-SWITCHDIP1 - Photocell autotest ON/OFFDIP2/3 - Automatic closure - Step by step - Step by step + automatic closureDIP4 - Flashing logicDIP5 - Strike enableDIP6 - Immediate closure on clearing photocellsDIP7/8 - Assignment of total or pedestrian opening to transmitter channels 1,2,3 or 4

Professional detachable terminal board

TERMINAL BOARDSfor limit switch

Force speed

Pause time

Obstacle detection

Wing displacement by closing

TRIMMERS

LED ER - Error GO - Gate open GC - Gate closed PH - Photocell status ST - Status of STOP contact

UNIK2ESK logic board

69


UNIK1E230 (1 motor)

UNIK2E230 (2 motors)

UNIK2E230SK logic board

UNIK line

CONTrOL UNITS

Self-learning control unit, 230 Vca, with built-in 433,920 MHz receiver, box and 10 VA transformer (UNIK1E230), 40 VA separate (UNIK2E230).

The UNIK control units 230V are available in several versions:- with built-in transformer (UNIK1E230 and UNIK2E230)- as board only without transformer (UNIK1E230SK and UNIK2E230 SK)

LED ER GO CC PH ST

POTENTIOMETRES Forcevitesse

Temps de pause

Contrôleobstacle

Déphasagebattants

BORNESpour fin de course

BORNIER professionnel

amovible

DIP-SWITCHDIP1 DIP2/3

DIP4 DIP5 DIP6 DIP7/8

Bouton START pour manœuvre d'OUVERTURE

Bouton de programmation radiocommandes

Bouton de programmation rapide

secondaire transformateur

primaire transformateur

ErreurPortail ouvertPortail ferméEtat de la photocelluleEtat du contact STOP

-----

-

------

Autotest photocellules Fermeture automatique Pas à pasPas à pas + fermeture automatique Logique clignotantActivation coup de bélierFermeture immédiate au passage photocellulesAttribution fonction ouverture totaleou piétonne aux canaux 1, 2, 3 ou 4 de l'émetteur

Quick programming button

Radio controlsprogramming button

START button for OPEN manoeuvre

Force speed

Pause time

Obstacle detection

Wing displacement by closing

TRIMMERS

TERMINAL BOARDSfor limit switch

LED ER - Error GO - Gate open GC - Gate closed PH - Photocell status ST - Status of STOP contact

Primarytransformer

Secondary transformer

DIP-SWITCHDIP1 - Photocell autotest ON/OFFDIP2/3 - Automatic closure - Step by step - Step by step + automatic closureDIP4 - Flashing logicDIP5 - Strike enableDIP6 - Immediate closure on clearing photocellsDIP7/8 - Assignment of total or pedestrian opening to transmitter channels 1,2,3 or 4

Professional detachable terminal board

70

SEr30E

Control unit accessory : BATKIT12V - 1,2Ah battery kit with connecting cables to UNIK line

SEr line

CONTrOL UNITS

Advanced control unit with built-in 433,920 MHz radio receiv-er, inputs for connection (Safety, flashing light and limit switches, with single-step and automatic time adjustable closure operating modes).

uManagement of 1 motor 230Vu50 usersuFunctions selectable by dip-switchuWork time storageuBuilt-in 433,920 MHz radio receiveru10 A relayuManagement for safety devicesuLimit switch managementuOpen/Close inputuFlashing light outputuABS box for outdoor use

71

PHOTOBEAMSWith modulated active infrared

A photobeam is an electronic device which uses modulated infrared beam technology to activate a contact (relay) through an interruption of the infrared beam.Composed of a transmitter and a receiver, photobeams are available in many different dimensions, beam ranges and field applications. All Prastel beams are supplied with an autotest function.In addition, all photobeams have been engineered to shield against and eliminate interfer-ences from power line, the sun and other luminous sources. Commonly used for safety or security applications for doors, automatic gates, in both resi-dential and industrial applications.

Prastel produces a wide range of photocells with 5-35 m range:• Wall-mountingphotocells• Flushmountingphotocells• Longrangewallmountingphotocells• Photocellwithselfpoweredtransmitter• Photocellswithsynchronismonmanydifferentfrequencies• Mini-photocells(diodes)forautomaticdoorsorelevators,withseparateamplifiers• Mini-photocells(diodes)forsafetyedgeswithseparateamplifier• Photocells(diodes)forindustrialgateswithseparateorincludedamplifier

72

Optical diodes : separated rX (transmitters) and TX (receivers) and amplifier

Multiplexer amplifier

Product code Mounting accessories Ir range Cable length IP grade (nominal) TX and rX

Cr10MS Flush 10 m 8 m IP67 Wall Safety edge

Product code N° beams N° relay outputs Intervention time IP grade

FOTO9S2AST 2 1 40 ms IP56

FOTO9S2A 2 1 40 ms IP42

Line with separated TX (transmitters) and rX (receivers) and built-in amplifier

FOTO30SDE Wall or 30 m Methacrylate 12-24 Vac/cc IP45 column and ABS

FT25BS2-r Wall 20 m Methacrylate Tx: 12/24 Vac/cc IP45 - TX and RX or 2 batt 3,6 V adjustable Rx: 12-24 Vac/cc

FOTO35SDE Flush 35 m Nylon 12-24 Vac/cc IP44 or column fibreglass

Product Mounting type Ir range Box material Power supply IP grade Code (nominal)

FT25B Wall 20 m Methacrylate Tx: 12/24 Vac/cc IP45 or 2 batt 3,6 V Rx: 12-24 Vac/dc

FSTYLE25A Wall 20 m Stainless steel 12-24 Vac/cc IP65 and ABS

PHOTOBEAMSWith modulated active infrared

The theoretical nominal range of the product is based upon the project data in the frame of an indoor use. Outdoor, the range can be reduced up to 80% and that due to imperfect alignment or atmospheric elements.

73


FOTO30SDE

RX

FT25B

Wireless TX

PHOTOBEAMSWith modulated active infrared - Separated TX and rX

uTransmitter with battery or line power supplyu Transmitter with contact input for safety rubberu Nominal range 20 mu Shieldedreceiveramplifieru Battery lifetime 2 years (BATF)u Alignment test point

The FOTO30SDE photocell has been designed and developed for a use on automatic gates, doors, shutters etc.

uNominal range 30 muAutotest functionuShieldedreceiveramplifieruPower supply 12/24 Vca/ccuAlignment test point

The FT25B photocell, evolution of FOTO30SDE, has been designed and developed for a use on automatic gates, doors, shut-ters etc. The transmitter can be powered by battery (2 lithium batteries 3,6 V - REF: BATF). The contact input is integrated inside the transmitter.

FOTO30SDE FT25BPower supply: 12 ÷ 24 Vac/dc Receiver: 12 ÷ 24 Vca/cc Transmitter: 2 lithium batt.3,6V-2,7Ah or 12÷24 Vca/ccConsumption: 50 mA < 500 uA (TX) - 30 mA (RX)Box: Methacrylate + ABS Methacrylate + ABSIR beam range: 30 m nominal 20 m nominalRelay contact capacity: 0,5 A @ 24 Vca/cc 0,5 A @ 24 Vac/dcIntervention time: < 20 ms < 40 ms Reset time: < 120 msOperating frequency: 850 Hz +/- 10%Modulation frequency : 1000 HzIR wavelength: 850 nm 950 nmProtection rating: IP 45 IP 45Operating temperature: from -20 to + 55° C from -20° to +55° CDimensions and weight: 110 x 50 x 25 mm - 200 g 110 x 50 x 25 mm - 200 g


74

FT25BS2-r

FOTO35SDE

Wireless TXRX


The FT25BS2-R photocell has been designed and developed for a use on automatic gates, doors, shutters etc. The transmitter can be powered by battery (2 lithium batteries 3,6 V) and the IR beam can be adjusted on 3 different positions, on the receiver as well as on the transmitter. The contact input is integrated inside the transmitter, used for the contacts management of the safety edge. All theses characteristics make the unit ideally for fixing on a moving leaf of a gate.

uNominal range 35 mu Autotest functionu Shielded electronic on the receiveru 12/24 Vca/cc power supplyu Alignment test point

uReceiver and transmitter beam adjustment 0° - 90° - 180°uTransmitter with battery or line power supplyu Transmitter with contact input for safety rubberu Nominal range 20 mu Shieldedreceiveramplifieru Battery lifetime 2 years (BATF)uLow battery signalu Alignment test pointu Synchronism selectable on 2 different frequenciesu 1 contact output with 2 relays for the redundancy

The FOTO35SDE photobeam has been designed and developed for a use on automatic gates, doors, shutters etc. The transmitter and receiver are fitted with adjustable screws for a flush mounting.

FT25BS2-r FOTO35SDEPower supply: Receiver: 12 ÷ 24 Vca/cc 12 ÷ 24 Vca/cc Transmitter: 2 lithium batt.3,6V-2,7Ah or 12÷24 Vca/ccConsumption: < 500 uA (TX) - 30 mA (RX) 55 mABox: Methacrylate + ABS Nylon fibreglassIR beam range: 20 m nominal 35 m nominalRelay contact: 0,5 A @ 24 Vac/dc 0,5 A @ 24 Vca/ccIntervention time: < 30 ms < 20 ms Reset time: < 120 msOperating frequency: 850 Hz +/- 10%Modulation frequency: 1000 Hz IR wavelength: 850 nm 850 nmProtection rating: IP 45 IP 44Operating temperature: from -20° to +55° C from -20° to +55° CDimensions and weight: 110x50x25 mm - 200 g 72x72x77mm, Ø58mm, 400g


75


FSTYLE25A

Vandal-proof

Photocells accessories :

COF50Column in black painted metal h.60 cm for FOTO35SDE

CESFMetallic container for FOTO35SDE (outdoor use)

COF30Column in black anodised aluminium h.60 cm for FOTO30SDE

BATF2 batteries kit 3,6V 2 , 7 A h , l i t h i u m thionyl chloride for FT25B and FT25BS2-R


The FSTYLE25A photocell is a vandal-proof photocell with a stain-less steel box, designed and developed for installation on industrial automation. The stainless fixing bracket allows 3 different fixing angles (0° - 90° - 180°).

uProtection rating IP 65uNominal range 20 mu 12/24 Vca/cc power supplyu Autotest functionu Rubber caps with cable entry

Power supply: 12 ÷ 24 Vac/dc Consumption: 50 mA Box: stainless steel IR beam range: 20 m nominalRelay type: Relay contact N.O.Relay contact: 0,5 A @ 24 Vac/dc Intervention time: < 20 ms Operating frequency: 850 Hz +/- 10% Modulation frequency: 1000 Hz IR wavelength: 950 nm Protection rating: IP 65 Operating temperature: from -20 to + 55° C Dimensions and weight: 30 x 115 x 33 mm - 600 g


76

FOTO9S2AST

Cr10MS

FOTO9S2A

flush mounted wall mounted optical safety edge

PHOTOBEAMSWith modulated active infrared - Amplifiers and diodes

Power supply: 12 ÷ 24 Vca/ccConsumption: 1.5 WCurrent consumption: 60 mABox: ABSN° relay outputs: 1 - N.O. / N.C.Intervention time: 40 msReset time: 0,25 sIR wavelength: 950 nmDiodes compatibility: CR10, CR20, CR9, CRFProtection rating: IP56 FOTO9S2AST / IP42 FOTO9S2AOperating temperature: from -20° to +55° CDimensions and weight: 135 x 75 x 65 mm - 400 g

IR beam range: 10 m nominalCable length TX + RX: 8 m + 8 mAmplifier compatibility FOTO9 seriesProtection rating: IP 67Operating temperature: from -20° to +55° CDimensions: Ø 13, prof.18 mmWeight: 300 g

CR10MS is a mini diode for automatic doors and elevators, with a 10 m range, developed with a shielded cable. It can be installed with supplied adaptors for flush, wall mounting or optical safety edge.

uNominal range 10 mu Resinate diodes, IP67u 3 mounting systems: Flush, wall or safety edges

Amplifier for CR10MS diode.

uMultiplex and synchronised system for high protection against interferences u Management of 2 beams, 1 relay outputu Redundant electronicu Easy useu Sensitivity adjustmentu Plug connectors on FOTO9S2A



77


CMO

CMO line accesories : CMM9Lower cap

CMM10Complete kit with upper cap + screws

CMO04Upper cap

CMM8Lower cap with cable mechanism

SAFET Y EDGES

CMO200 Length 2 m

CMO300 Length 3 m

CMO400 Length 4 m

Available lengths:

note: minimum order qty of 10 pcs

Microswitch capacity: 16 A - 250 VMinimum force of intervention: 900 gWeight: 1350 g/mMaterial: EPDM noirHardness: shore 57Profile height: 75 mmProfile length: from 2 m to 4 m

Electro-mechanical safety edge, high profile for outdoor use on automatic gates.

CertifieddeviceEN12978(2003-5)n°05.081,categoryEN954-12/3.


CMOprofile

dimensions in mm

78

uPower supply via 2 alkaline «AA» 1,5V batteriesuABS box for outdoor useu868 MHz frequencyuRange 50 m uInputforN.C.orresistivecontact(8,2KΩ)uLow battery signaluProgramming button / Box testu4 fastening points

SAFETY EDGES ACCESSOrIES

TCO6TX

TCO6rX

TCO6KIT

NEW

TCO6 is the new bidirectional radio transmitter for safety edges, composed of a TCO6TX transmitter and a TCO6RX receiver.The unit sends an RF signal when it observes a change in state from its NC input. The transmitter is powered by 2 batteries 1,5V and it is housed in a weather-proof ABS enclosure for outdoor use.Normally used on a moving leaf of a gate for the management of:- Resistive safety edges 8,2 KΩ- Contact safety edges

It is particularly recommended as additional safety device on automatic gates, industrial gates, automatic access and barrier where it is impossible to cable from the gate to electric board.

TCO6TX TCO6rX Power supply: 2 batteries 1,5V 12 -24 Vca/VccConsumption: - 25 mA @ 12 VFrequency: 868 MHz 868 MHzRange : 50 m 50 mRelay contact: - 2Memory capacity: - 8 transmitters (4 by relay)Protection rating: IP 55 IP 55Operating temperature: from -20° to +55 °C from -20° to +55 °CDimensions: 78 x 57 x 41 mm 120 x 90 x 30 mmWeight: 100 g 250 g


uPower supply 12/24 Vca/ccuABS box for outdoor useuUp to 4 transmitters per relayu868 MHz frequencyu2 relay outputs

Approved in

accordance

with the CE

standards in

force

79


Orangefixedlight 24 Vdc, filament lamp 15 W, with integrated 433 MHz antenna

Orangefixedlight 230 Vac, filament lamp 15 W, with integrated 433 MHz antenna

FLASHING LIGHTS

FEBOLIXA FEBOLIFA24K FEBOLIFA220K FEBOLA24K FEBOLA220KPower supply: 12 Vdc 24 Vdc 230 Vac 24 Vdc 230 Vac Lamp type: Xenon 3W Filament 15W Filament 15W Filament 15 W Filament 15 WFlashing: 2 cycles(s) 2 cycles (s) 2 cycles (s) Non NonBox color: orange orange orange orange orangeProtection rating: IP 55 IP 55 IP 55 IP 55 IP55Operating temperature: from -20° to +55°C from -20° to +55°C from -20° to +55°C from -20° to +55°C from -20° to +55°CDimensions: Ø 75x126 mm 135x112x82 mm 135x112x82 mm 135x112x82 mm 135x112x82 mm

FEBOLIXA

STAND-ALONE FLASHING LIGHTS WITH BUILT-IN ELECTrONIC

FIXED LIGHT WITHOUT ELECTrONIC + INTEGrATED ANTENNA

FEBOLA24K

FEBOLA220K

Orangeflashinglight12 Vdc, xenon lamp 3 W

Orangeflashinglight 24 Vdc, filament lamp 15 W

Orangeflashinglight 230 Vac, filament lamp 15 W

FEBOLIFA24KFEBOLIFA220K

SAFETY EDGES ACCESSOrIES


80

MOTION DETECTOrS

Product Description Detection Power Installation Range IP Code supply height grade

DM30P1 Micro-wave detector Unidirectional and 24 GHz, K band omnidirectional 12-24 Vac/cc Max 3 m 6 m IP 55 planar technology selectable with double antenna

DM60M Micro-wave detector Unidirectional and 9,90 GHz omnidirectional 12-24 Vac/cc Max 6 m 14 m IP 66 planar technology selectable with double antenna

Persons and vehicles

A motion detector is an electronic device used to iden-tify motions of persons or vehicles.

With the micro-wave technology, the operating principle is based upon an high frequency radio reception-transmis-sion, performed through an adjustable planar antenna.

It allows to perform an omnidirectional as well as unidirec-tional detection (detection of motion direction).

Micro-wave detectors allow to perform detections within medium to large-sized areas. They are adapted for an installation either on automatic doors, rapid vertical doors or industrial doors.

81


MOTION DETECTOrS

DM30P1

1 m

3 m0

0,5m0,5m 1,5m1,5m

DM30P1 detection areawhen installed at 2,5m height

NEW

Persons and vehicles

The DM30P1 micro-wave motion detector has been designed to control the opening of automatic doors. They can detect the motion of persons or objects on surfaces from 1 to 10 m2, and is fitted with a trimmer for sensitivity adjustment.

Power supply: 12-24 Vca/VccConsumption: 60 mAMicro-wave frequency: 9,9 GHzRelay contact capacity: from 1 A to 24 VRelay release time: de 0,5 à 6 secHorizontal adjustment: ± 45°Vertical adjustment: 0 ÷ 60°Output contacts: N.O./N.C.Operating temperature : from -20° to +55° CProtection rating: IP 55Dimensions and weight: 73 x 96 x 64 mm - 130 g

uDetection surface from 1 to 10 m2 uMax. installation height 3 muUnidirectional or omnidirectionaluHorizontal and vertical adjustmentuOutdoor - indoor applicationuRelay release time adjustment


82

DM60M

DM60M detection area when installed at 2,5 m height

2,8 m

5 m

8 m

0 2 m2 m

Unidirectional version A: Max. detection areaB: Average detection areaC: No detection

MOTION DETECTOrSPersons and vehicles

The DM60M micro-waves detector has been designed to control the opening of automatic industrial gates.It is possible to adjust it vertically (± 45°) and horizontally (± 90°), allowing to detect persons or vehicles on large surfaces. It is possible to configure the detector on unidirectional or bidirec-tional mode and a LED indicates the motion detection.

Power supply: 12 - 24 Vca/VccConsumption 80 mAOperating frequency : 9,90 GHzRelay contact range: 2 A @ 24 Vca/VccOutput contact: N. O. / N. C., selectableDetection indicator: LEDHorizontal adjustment: 180° +/- 90° horizontal +/- 45° verticalMinimal speed of detection: 0,05 m/sProtection rating: IP 66Operating temperature : from -20° to +55 °CDimensions and weight: 140 x 95 x 73 mm - 800 g

uDetection area from 1 to 20 m2

uMax. installation height, 6 muUnidirectional or omnidirectional selectableuHorizontal and vertical adjustmentuOutdoor - indoor applicationuConnecting cable L. 2 m


83

METAL DETECTOrS

METALLIC MASS DETECTOR FOR VEHICLES TRANSIT CONTROL AND / OR AUTHORIZATION

A metallic mass detector uses an underground magnetic loop to transmit electronic signals to a signal detector. The system is based upon the detection of an inductance variation generated by the passing of a metallic mass on the loop. All the Prastel range of detectors manages different working frequencies. The version with directional logic determines the opening of automatic passageway only when the loop has been crossed in the set direction (directional logic).The system is perfect to control the opening/closing of automatic passageway only when metallic masses (cars, carriages etc.) transit, discriminating them from the transit of persons. It is usually used to activate automatic barriers, industrial doors and every support need for the automation of a vehicular passageway.

The system is composed of:

• SELF-CALIBRATING SIGNAL AMPLIFIER (detector), with automatic sensitivity gain and different selectable working frequencies

• UNDERGROUND ANTENNA OR LOOP (see our WIRE)

84

Detectors summary table

Underground loops summary table

Product Description Dimensions / Perimeter Cable type IPcode grade

WIrE1 Underground double 6 m + 15 m cable Self-extinguishing PVC IP 67 loop antenna for connection (2 x 0,5 mm2) in compliance with CEI standards, weather-proof

WIrE2 Underground double 10 m + 15 m cable Self-extinguishing PVC IP 67 loop antenna for connection (2 x 0,5 mm2) in compliance with CEI standards, weather-proof

15 m cable

WIRE23 x 2 m

WIRE12 x 1 m

3 m

2 m

2 m

1 m

METAL DETECTOrS

Product Description Power supply Box type N° connectable IPcode loops grade

MLX220BZ 1-channel 230 Vac ABS on DIN rail 1 IP 30 detector loop with UNDECAL socketMLX24BZ 12-24 Vac/cc base included 1 IP30

MLX24BD 1-channel 24 Vac/cc On DIN rail 1 - detector loop

ABS on DIN railMLX224BZ 2-channel 24 Vac/cc with UNDECAL socket 2 IP 30 detector loop base included

85


MLX220BZMLX24BZ

MLX224BZ

METAL DETECTOrSMETAL DETECTOrS

MLX220BZ and MLX24BZ are 1-channel electromagnetic detectors that, using an underground loop, detect the presence of metallic objects through magnetic induction (cars, motorbikes etc.). u1 magnetic loop management u1 relay output uFunctions selectable by dip-switch uUNDECAL socket base supplied

Power supply: 24 Vca/VccConsumption: 70 mAConnectable loops: 2N° outputs: 2Type of detection: Impulsive and/or presenceRelay output 1: N.O. - Impulsive (100 ms) or presenceRelay output 2: N.O. - Impulsive (100 ms) or presenceRelay capacity: 2 A @ 240 VSignals: 2 LED red, 2 LED green, 1 LED yellowProtection rating: IP 30Operating temperature: from -20° to +55 °CDimensions and weight: 88 x 76 x 38 mm - 85 g

MLX24BZ MLX220BZPower supply: 12 - 24 Vca/Vcc 230 VcaConsumption: 40 mA 40 mAConnectable loops: 1 1N° outputs: 1 1Detection type: Impulsive and/or presence Impulsive and/or presenceRelay output 1: NO/NC impulsive (150 ms) NO/NC impulsive (150 ms)Relay capacity: 2 A @ 230 V 2 A @ 230 VSignals: 1 LED red 1 LED red Protection rating: IP 30 IP 30Operating temp: from -20° to +55 °C from -20° to +55 °CDetector dimensions: 73x80x35 mm 73x80x35 mmSupport dimensions: 67x38x25 mm 67x38x25 mmWeight: 145 g 145 g

MLX224BZ is a 2-channel electro-magnetic detector with directional logic. Ideally used for passageways which require management of direc-tion transit, input/output or a count of transiting vehicles. MLX224BZ integrates the self-calibrating function in case of disturbances.

u2 magnetic loops managementuDirectional logicu 2 relay outputsu Functions selectable via dip-switchu UNDECAL socket base supplied



86

MLX24BD

WIrE1 6 m-15 m cable

WIrE2 10 m-15 m cable

WIRE junction

NEW

METAL DETECTOrS

Power supply: 24 Vac/dc Consumption: 40 mAConnectable loops: 1N° outputs: 2Type of detection: Impulsive and/or presenceRelay output 1: NO/NC- Impulsive (100 ms)Relay output 2: NO/NC- Impulsive or presenceRelay capacity: 0,5 A @ 24 VSignals: 1 LED redProtection rating: –Operating temperature: from -20° to +55° CDimensions and weight: 72 x 64 x 10 mm - 91 g

MLX24BD is a 1-channel electro-magnetic detector, derived from the MLX24BZ line, for an installation on DIN rail support.

u1 magnetic loop managementu2 relay outputsuFunctions selectable via dip-switch


Assembled underground loop, ready to install, double loop with cover in self-extinguishing PVC, available in 2 perimeter lengths: 6 m or 10 m.

WIRE1 WIRE2Perimeter dimensions: 6 m + 15 m cable 10 m +15 m cableType of detection: magnetic induction magnetic induction Protection rating: IP 67 IP 67


GENErAL SALES CONDITIONSMETAL DETECTOrS

1. ORDERSAll product orders placed by the buyer are subject to total acceptance of the below conditions.No order shall be deemed to be accepted until an order confirmation is issued by Prastel. Each order to Prastel shall be deemed to be a firm and irrevocable offer by the buyer to purchase goods subject to the terms and conditions. After being accepted, no purchase order can be cancelled, unless written agreement, and provided that a 20% cancellation fee is borned by the buyer.Prastel reserves the right to postpone delivery dates or to cancel orders in its entirely or partially if performance of the contract shall be prevented or hindered by any cause beyond Prastel’s reasonable control.For a first order, the payment is due cash with order.

2. TECHNICAL DATAPrastel reserves the right to modify its products without prior notice and liability. In no circumstances, Prastel shall be liable for any claims or special, consequential, incidental damages caused by such substitutions or modifications.

3. PRICESAll prices are quoted EX-Works La Ciotat, standard packing included and exclude VAT and any applicable taxes, levies, duties or imposts relating to the export of goods, insurance and freight charges. All orders accepted shall be subject to prices ruling at the time of the order. All quotations confirmed by Prastel in writing will be firm for 30 days.Prices may be subject to variation with a minimum notice of 30 days.

4. DELIVERYUnless otherwise agreed, the goods will be delivered Ex-works La Ciotat and at Buyer’s risk and expense. Unless otherwise stated in writing, Prastel reserves the right to select the mean of transport and routing and shall not be liable for it. Prastel shall not be liable to the buyer for any loss or damage howsoever caused to the buyer or in any way whatsoever for late delivery of goods. Prastel will endeavour to dispatch all orders complete or as complete as possible.All non-conformity claims for the nature or quantity of the goods with the purchase order should be sent by registered mail to Prastel, within 8 days following the delivery date.

5. PAYMENTPayment terms will be agreed between Prastel and the buyer before opening the account.If the buyer fails to make payment in full for the price of the goods on the due date, or a payment made by the buyer fails to be honored, Prastel reserves the right to claim interests in accordance with EURIBOR interest rate multiplied by 3 points, plus 15% of the overdue amount.Whilst payment remains overdue, we will refuse any further goods until the account has been brought up to date.

6. MINIMUM ORDER VALUEThe minimum order value for each order is 1,000 euros net of discount. Orders of a lower value will be evaluated separately. Below this amount, a fixed fee for charges of 50,00 euros will be applied.

7. TITLEAll goods referred to on outstanding invoices due to Prastel by the buyer shall remain the absolute property of Prastel until payment of all invoiced amounts have been received and cleared.

8. WARRANTY AND LIMITATION OF LIABILITYPrastel warrants that unless otherwise stated, the goods will be free from substantial defects in material and workmanship for 24 months from the date of production. All warranties cover only defects arising under normal use and do not include malfunction or failure result-ing from misuse, abuse, neglect, alteration, acts of nature, electrical overload, radio or any other environmental interferences, unusual temperatures or humidity, improper installation or damage caused by the buyer, or repairs made by anyone other than Prastel. Prastel shall either repair or replace the defective goods at its sole discretion and on its premises at no charge to the buyer at presentation of the invoice. Prastel shall be liable for any claims or any special, consequential, incidental or other damages including loss of profit, breach, repudiation of contract.The replacement, modification or repair of components under warranty shall not extend the warranty time of the product.

9. RETURNSAll returns shall be delivered in the original condition and packaging mentioning packing date and number. All products returned to Prastel without prior written authorization will be refused.

10. REPAIRSAll products to be repaired must be returned to Prastel carriage paid after agreement with our technical department. All repairs shall be subject to prior acceptance by the buyer of all repair costs. In any case, Prastel shall charge the buyer all repairs and delivery costs of the repaired goods.All repairs under warranty or not, must be returned with the RMA form (Return Material Authorization) authorized with our technical department and arranged at the buyer’s own transport costs.

11. JURISDICTION AND VENUEThis contract shall be governed under French laws. Marseille court will have exclusively jurisdiction and venue over any dispute arising from this contract.

GENErAL SALES CONDITIONS

GENErAL SALES CONDITIONS

PRASTEL France ZI Athélia II225 Impasse du Serpolet13704 LA CIOTAT CedexFRANCETel : +33 (0)4 42 98 06 06Fax : +33 (0)4 42 04 53 51Email : [email protected] P

RA

STE

L-00

1-E

N-2

013

prastel - general catalogue

Documents

u readers

u easymini

u power supplies

u m2000pe

u mt100004

u mt150002

u easybked

u m1000e