PRECISION THREAD GAGING SOLUTIONS

2

Precision Fixed Limit Thread GagesEmuge’s comprehensive line of thread gages consist of GO / NO-GO plug gages and thread depth plug gages. A Certificate of Accuracy is furnished with each gage.*

Gages inspect the pitch diameter and functional thread for internal-threaded components.

Features:

• Exceptionally hardened tool steel and highly accurate

• Full range of inch, metric sizes in coarse, fine, UNC, UNF, UNS, NPT, NPTF, along with Emuge

Self-Lock™ threads forms

• Accommodates 2B, 3B, 6H classes of fit

• Stable thread start for easy insertion

• Eliminate thread damage in demanding environments

• Short form Certificate of Accuracy is furnished free with each gage. Long form Certificates are

available upon request.

Gage certification is performed by accredited calibration service “DECOM UGK GmbH”

calibration laboratory

PRECISION THREAD GAGE SOLUTIONS

*

3

GO / NO-GO PLUG GAGES

NPTFSize (in) EDP No.

1/16-27 L0520100.5782

1/8-27 L0520100.5783

1/4-18 L0520100.5784

3/8-18 L0520100.5785

1/2-14 L0520100.5786

3/4-14 L0520100.5787

UNC (CONT.)Size (in) EDP No.

3B C

lass

of F

it

7/8-9 L0100110.5017

1"-8 L0100110.5018

1 1/8-7 L0100110.5019

1 1/4-7 L0100110.5020

1 3/8-6 L0100110.5021

1 1/2-6 L0100110.5022

NPT Size (in) EDP No.

1/16-27 L0500100.5763

1/8-27 L0500100.5764

1/4-18 L0500100.5765

3/8-18 L0500100.5766

1/2-14 L0500100.5767

3/4-14 L0500100.5768

1"-11-1/2 L0500100.5769

UNC Size (in) EDP No.

2B C

lass

of F

it

#1-64 L0100100.5000

#2-56 L0100100.5001

#3-48 L0100100.5002

#4-40 L0100100.5003

#5-40 L0100100.5004

#6-32 L0100100.5005

#8-32 L0100100.5006

#10-24 L0100100.5007

#12-24 L0100100.5008

1/4-20 L0100100.5009

5/16-18 L0100100.5010

3/8-16 L0100100.5011

7/16-14 L0100100.5012

1/2-13 L0100100.5013

9/16-12 L0100100.5014

5/8-11 L0100100.5015

3/4-10 L0100100.5016

7/8-9 L0100100.5017

1"-8 L0100100.5018

1 1/8-7 L0100100.5019

1 1/4-7 L0100100.5020

1 3/8-6 L0100100.5021

1 1/2-6 L0100100.5022

3B C

lass

of F

it

#1-64 L0100110.5000

#2-56 L0100110.5001

#3-48 L0100110.5002

#4-40 L0100110.5003

#5-40 L0100110.5004

#6-32 L0100110.5005

#8-32 L0100110.5006

#10-24 L0100110.5007

#12-24 L0100110.5008

1/4-20 L0100110.5009

5/16-18 L0100110.5010

3/8-16 L0100110.5011

7/16-14 L0100110.5012

1/2-13 L0100110.5013

9/16-12 L0100110.5014

5/8-11 L0100110.5015

3/4-10 L0100110.5016

UNF (CONT.)Size (in) EDP No.

3B C

lass

of F

it

#6-40 L0100110.5039

#8-36 L0100110.5040

#10-32 L0100110.5041

#12-28 L0100110.5042

1/4-28 L0100110.5043

5/16-24 L0100110.5044

3/8-24 L0100110.5045

7/16-20 L0100110.5046

1/2-20 L0100110.5047

9/16-18 L0100110.5048

5/8-18 L0100110.5049

3/4-16 L0100110.5050

7/8-14 L0100110.5051

1"-12 L0100110.5052

1 1/8-12 L0100110.5053

1 1/4-12 L0100110.5054

1 3/8-12 L0100110.5055

1 1/2-12 L0100110.5056

UNF Size (in) EDP No.

2B C

lass

of F

it

#0-80 L0100100.5033

#1-72 L0100100.5034

#2-64 L0100100.5035

#3-56 L0100100.5036

#4-48 L0100100.5037

#5-44 L0100100.5038

#6-40 L0100100.5039

#8-36 L0100100.5040

#10-32 L0100100.5041

#12-28 L0100100.5042

1/4-28 L0100100.5043

5/16-24 L0100100.5044

3/8-24 L0100100.5045

7/16-20 L0100100.5046

1/2-20 L0100100.5047

9/16-18 L0100100.5048

5/8-18 L0100100.5049

3/4-16 L0100100.5050

7/8-14 L0100100.5051

1"-12 L0100100.5052

1 1/8-12 L0100100.5053

1 1/4-12 L0100100.5054

1 3/8-12 L0100100.5055

1 1/2-12 L0100100.5056

3B C

lass

of F

it

#0-80 L0100110.5033

#1-72 L0100110.5034

#2-64 L0100110.5035

#3-56 L0100110.5036

#4-48 L0100110.5037

#5-44 L0100110.5038

METRIC Size (mm) EDP No.

6H C

lass

of F

it

M 1.6 LU100100.0016

M 2 LU100100.0020

M 2.5 LU100100.0025

M 3 LU100100.0030

M 3.5 LU100100.0035

M 4 LU100100.0040

M 5 LU100100.0050

M 6 LU100100.0060

M 8 LU100100.0080

M 10 LU100100.0100

M 11 LU100100.0111

M 12 LU100100.0112

M 14 LU100100.0114

M 16 LU100100.0116

M 18 LU100100.0118

M 20 LU100100.0120

M 22 LU100100.0122

M 24 LU100100.0124

M 30 LU100100.0130

M 36 LU100100.0136

M 5 x 0.5 LU100100.0218

M 6 x 0.75 LU100100.0229

M 8 x 0.75 LU100100.0250

M 8 x 1 LU100100.0251

M 10 x 1 LU100100.0276

M 10 x 1.25 LU100100.0277

M 12 x 1.25 LU100100.0302

M 12 x 1.5 LU100100.0303

M 14 x 1.5 LU100100.0331

M 15 x 1.5 LU100100.0345

M 16 x 1.5 LU100100.0359

M 18 x 1.5 LU100100.0390

M 20 x 1.5 LU100100.0422

M 22 x 1.5 LU100100.0438

4

SELF-LOCKING THREAD GO / NO-GO PLUG GAGES

Control your production process safely and economically. Quickly recognize size and form deviations and weakened or unfit threads, especially for thread-critical industry applications.

SELF-LOCKTM LK Size EDP No.

LK -

UN

C

#4-40 L0100100.5656

#6-32 L0100100.5658

#8-32 L0100100.5659

#10-24 L0100100.5660

#12-24 L0100100.5661

1/4-20 L0100100.5662

5/16-18 L0100100.5663

3/8-16 L0100100.5664

7/16-14 L0100100.5665

1/2-13 L0100100.5666

9/16-12 L0100100.5667

5/8-11 L0100100.5668

3/4-10 L0100100.5669

7/8-9 L0100100.5670

1"-8 L0100100.5671

LK -

UN

F#4-48 L0100100.5707

#6-40 L0100100.5709

#8-36 L0100100.5710

#10-32 L0100100.5711

1/4-28 L0100100.5713

5/16-24 L0100100.5714

3/8-24 L0100100.5715

7/16-20 L0100100.5716

1/2-20 L0100100.5717

9/16-18 L0100100.5718

5/8-18 L0100100.5719

3/4-16 L0100100.5720

LK -

M

M 3 LO100100.1046

M 4 LO100100.1048

M 5 LO100100.1050

M 6 LO100100.1052

M 8 LO100100.1054

M 10 LO100100.1056

M 12 LO100100.1058

M 14 LO100100.1059

M 16 LO100100.1060

M 20 LO100100.1062

M 24 LO100100.1064

A dirt flute is provided on the GO side to eliminate thread damage in demanding environments.

Gage handles with double surfaces for marking, leaving ample space for custom marking requirements. (An Emuge service that is available.)

The NO-GO side is clearly marked with a red ring.

Reduced thread start for easy insertion of the NO-GO gage body.

Recessed minor thread diameter of the NO-GO gages for safe function.

Gewindelehren · Thread gauges

549

Product Finder

M MJ

MF

UNC UNJC

UNF UNJF

Rp R, Rc

G

NPT, NPTF

BSW

Pg, MF

EG (STI) SELF-LOCK

Tr, Tr-F Rd

Glatt Smooth

GT, TD

Tech. Info

6.3 EMUGE-Gewindelehren – Prüftechnik in Perfektion 6.3 EMUGE thread gauges – Gauging technology to perfection

≤ ø 40 mm

Form R nach DIN 2240-1 mit Einsteckkegel. Gut- und Ausschussseite auf einem Lehrengriff.

> ø 40 mm und ≤ ø 200 mm

Ähnlich DIN 2240-2 mit Kugelbefestigung. Gut- und Ausschussseite auf je einem Lehrengriff. Sicherer Halt bei Lehrung und Prüfung der Lehre im 3-Draht-Messverfahren.

≤ ø 40 mm

Form R acc. DIN 2240-1 with fixing taper.

Go and no-go side on one gauge handle.

> ø 40 mm and ≤ ø 200 mm

Made acc. DIN 2240-2 with ball fixture.

Go and no-go side are mounted each on a single handle.

Safe grip for gauging and checking of the gauge

in a 3-wire measuring process.

Einführansatz

Reduced thread start

for easy insertion of the no-go gauge body

Rote Farbkennzeichnung der Ausschussseite

Red marking of the no-go side

Eindeutige Ident-Nr. jeder Gewindelehre stellt die notwendige EMUGE werksinterne Rückverfolgbarkeit sicher

Individual ident no. for each single gauge

for safe tracing back to production at EMUGE

x

Ab ø 5,5 mm erhält jeder Gutlehrdorn eine Schmutznut, dadurch sichere Lehrung auch unter schwierigen Einsatzbedingungen

Starting from dia. 5.5 mm each go plug gauge is provided with

a dirt flute, for safe gauging even under difficult conditions

Gerändelter Griff

Knurled handles

(safe handling even with greasy fingers)

Unvollständige Gewindegänge werden bis zum Beginn des Vollprofils entfernt, dadurch stabiler Gewindeanfang

Incomplete threads are removed until the beginning

of the full thread, in order to create a stable thread start

Lehrengriff mit 2 Beschriftungsflächen Ausreichend Platz für kundenspezifische Angaben (auf Wunsch auch von EMUGE durchführbar)

Gauge handles with double surfaces for marking,

Funktionsgerechte Kern-Freiarbeitung der Ausschuss-Gewindelehren

Recessed minor thread diameter of the no-go gauges for safe function

xX

X

Exceptionally hardened tool steel and highly accurate.

A full range of stocked inch and metric gages are manufactured to ANSI B1.2 (Unified screw threads) and ANSI B1.16M (metric M series screw threads).

Accommodates 2B, 3B, 6H classes of fit.

Made in Germany by Emuge.

Short form Certificate of Accuracy is furnished free with each gage. Long form Certificates are available upon request.

PRECISION THREAD GAGE ADVANTAGES

Incomplete threads are removed until the beginning of the full thread, in order to create a stable thread start.

Clearly identified with the size and Emuge identification number for traceability.

Knurled handles for maximum gripping ability and safety.

©2018 Emuge Corp. 3M-11/18MA Printed in USA

EMUGE Corp.1800 Century Drive, West Boylston, MA 01583800-323-3013 • www.emuge.com

Emuge Corp. has been the product technology and performance leader in their field for nearly 100 years. Emuge manufactures an extensive line of taps, drills,

thread mills, end mills, toolholders, clamping devices and

other rotary cutting tools, over 10,000 items sold through

distributors worldwide.

Analog – GT-GR-LD SeriesManual Operation

Used for manually gaging threads and thread depths simultaneously, the gage is inserted into the threaded hole and screwed to the bottom. The total thread depth can be read off the scale from the point where the scaled sleeve disappears into the handle, to a resolution of 0.5 mm. Gages can be fitted with a torque limiter on request, for fine adjustment of measuring depth of the thread which allows the user to maintain consistent screw-in torque without transmitting torque.

Thread Depth Plug GagesVisit emuge.com for more information.

Analog – TD-Bit-GUT Series Automatic Operation

Used with a drive unit such as a cordless or pressurized air screwdriver or portable drill, threads and thread depths are simultaneously gaged, saving time and increasing gaging consistency. Automatic gaging with a constant torque improves repeatability and results. Due to a DIN ISO 1173 hexagon ¼" bit, many gages can be driven with one single unit and quickly changed.