PREFABRICATED CABINWET UNIT

Revision Date : Jan.2021

SEJIN Technical Industries Co., Ltd.

15, Eogokgongdan 5-gil, Yangsan-si, Gyeongnam(50591), Korea.Tel. +82-55-782-1180 Fax. +82-55-782-1001E-Mail : marketing@sejintec.co.krwww.sejintec.co.kr

Head office / Factory / Warehouse

Challenge towards the TopCraftsmen to the world’s finest ships and Offshore Modules.Leading company in the maritime field in Korea since 1988.

CONTENTS

P. 05P. 07

PREFABRICATEDCABIN

NORSOK STANDARDCABIN LAYOUT

P. 19

REFERENCE

REFERENCE

P. 25

QHSE

QHSE

P. 27

CONTACT US

CONTACT US

0201SEJIN Head office in Yangsan, Korea

P. 11P. 13

PREFABRICATEDWET UNIT

BATHTUB UNITSHOWER UNIT

P. 15

PREFABRICATIONPROCESS

PREFABRICATIONPROCESS

P. 17

INSTALLATION

INSTALLATION

Bathtub Type

0403

UPOLSTERY

WINDOW CURTAIN

FURNITURE

BED CURTAIN

DOOR BLADE

WALL PANEL

CEILING PANEL

FLOOR FINISH

PREFABRICATED CABIN SEJIN produces top quality Prefabricated Cabins which satisfy the NORSOK Standard.It also has excellent sound absorption and protection stability, so it has a large share in domestic and overseas markets. SEJIN manufactures and produces the highest quality Prefabricated Cabins for our customers.

Complying to the NORSOK Standard

Prefabricated Cabin Wet Unit

EDDA ACCOMMODATION VESSELCABIN

IMO CERTIFIEDMATERIALS FIRE RETARDANT

SOUNDREDUCTION

THERMAL

To satisfy NORSOK StandardsSEJIN is producing top quality Prefabricated Cabins that satisfy NORSOK Standards.SEJIN manufactures and produces the best quality Cabins and for delivery to customers.

PREFABRICATED WET UNIT

FURNITURE, EQUIPMENTAND ACCESSORIES

C-002

(ARCHITECTURALCOMPONENTSAND EQUIPMENT)

C-002

(ARCHITECTURAL COMPONENTS AND EQUIPMENT)

ARTICLENORSOK STANDARDITEM

17.2

17.3

17.11

20.1

FLOOR

GENERAL REQUIREMENTS

WALL

FLOOR ELECTRICAL HEAT

WORKINGENVIRONMENTREQUIREMENTS

S-002

(WORKING ENVIRONMENT)5.5.3

OTHER ACOUSTIC REQUIREMENTS

EASY TO CLEAN, WITHOUT COMPLICATED JUNCTIONS AND RECESSES OR NICHES.DUST TRAPS ARE AVOIDED.

SEAMLESS AND GENTLE RADIUS WALL PANEL.

SHALL BE POSSIBLE TO REPLACE DAMAGED CABLES EASILY DURING THE OPERATIONAL PHASE WITHOUT DISMANTLING THE BATHROOM UNIT.

WALL PANEL (CABIN TO CABIN)R’w 45dB = Rw 45dB + 5dB [C002] + 3dB [S002]

DOOR (CABIN TO CORRIDOR)R’w 40dB = Rw 40dB + 5dB [C002] + 3dB [S002]West Mira Project / 1-man Unit cabin

T HERMAL- Delivers outstanding insulation performance.

N OISE- Provides quality product that meets the noise standards.

F IRE- Excellent product that passed through FIRE TEST.

Provides stability that satisfies NORSOK Standard

NORSOK

TOTAL MOHO NORD PROJECT2 MEN CABIN

05 06

NORSOK STANDARDPREFABRICATED CABIN NORSOK STANDARD CABIN LAYOUT

FABRICATED AS ONE WATERTIGHT JOINT LESS UNIT OF STAINLESS STEEL, ALUMINIUM OR OTHER NON-CORRO-SIVE MATERIAL.

OWNER TYPE CLASS SHIPYARD

WEIDONG FERRY(KOREA) RO-PAX KR

HYUNDAI MIPO DOCKYARD CO., LTD. (KOREA) 134 SET

EDDA(KOREA) ACCOMM VESSEL

DNV.GLCOMF V(1)

HYUNDAI HEAVY IND. CO., LTD.(KOREA) 406 SET

MAERSK DRILLING(DENMARK) JACK-UP RIG

DNV.GL(NORSOK)

DAEWOO SHIPBUILDING & MARINEENGINEERING CO., LTD. (KOREA) 180 SET

TOTAL(FRANCE) FPU BV

HYUNDAI SAMHO HEAVY IND. CO., LTD.(KOREA) 225 SET

SEADRILL(NORWAY) SEMI-RIG

DNV.GL(NORSOK)

HYUNDAI SAMHO HEAVY IND. CO., LTD.(KOREA) 150 SET

FRED OLSEN(NORWAY) SEMI-RIG

DNV.GL(NORSOK)

HYUNDAI HEAVY IND. CO., LTD.(KOREA) 140 SET

SLP (UK)NEXEN(UK)FIXED

PLATFORM DNV.GL 70 SET

Quantity of SET

Updated on JAN.2021 REFERENCE

TOTAL 1,305 SET

07 08

CABIN LAYOUT

TYPICAL DRAWINGNORSOK CABIN TYPE

CREW CABIN TYPE

PASSENGER CABIN TYPE

4500

4250

2100

4040

1990

4185

2250

4180

46503535

4160

4175

4945

1 MAN

CREW CLASS

RO-PAX CRUISE

OFFICE CLASS CAPTAIN CLASS

TYPICAL CONSTRUCTION

TYPICAL SECTION BETWEENCABIN AND WET UNIT

TYPICAL SECTION BETWEENCABIN AND LOBBY

CEILING PANEL

CABIN

CEILING PANEL

DETAIL "A"

10

CLE

AR O

PENI

NG H

EIG

HT

: 205

0

10

25

2 MAN

LAYOUT PLAN

25 30 25

25

(FR

OM

FLO

OR

)10

00

25

100

75

CORRIDOR SIDETOILET SIDE

SEALING

SECTION "D - D"

DETAIL "B"

DETAIL "A"

DETAIL "C"

TOILET SIDE

CABIN SIDE

PREFABRICATED CABIN NORSOK STANDARD CABIN LAYOUT

Shower Unit

Bathtub Unit

1009

IMO CERTIFIEDMATERIALS

FIRE RETARDANT

PREFABRICATED WET UNITThink of the Wet Unit with fine details and beautiful designs.

WEIDONG FERRY RO-PAXWET UNIT

HYGIENICSOUNDREDUCTION

1211

BATHTUB UNIT

ACCESSORIESISOMETRIC PERSPECTIVE

ENGINEERING DRAWINGPERSPECTIVE

PREFABRICATED WET UNIT BATHUB UNIT SHOWER UNIT

FAUCETSHOWER PIPE

SINGLE HOOK TOILET BRUSH HOLDER

ROLL HOLDER

SPARE ROLL HOLDER

TOOTHBRUSH TUMBLER

SOAP DISH

GRAB BAR

BATH TOWEL HOLDER

TYPE-A (1500X1900) TYPE-B (1600X2000)

DOUBLE TOWEL HOLDER

SHOWER MIXER

LOTION DISPENSER

1600

2000

1500

1900

1413

SHOWER UNIT

ACCESSORIES

ISOMETRIC PERSPECTIVE

ENGINEERING DRAWINGPERSPECTIVE

PREFABRICATED WET UNIT BATHUB UNIT SHOWER UNIT

TYPE-A (1350X1650)

TYPE-D (1210X2030) TYPE-E (1038X2060)

TYPE-B (1200X1800) TYPE-C (1600X1700)

GRAB BAR ROLL HOLDER TOOTHBRUSH TUMBLER

SHOWER MIXER SHOWER HEAD FAUCET SOAP DISH BATH TOWEL HOLDER

TOILET BRUSH HOLDER

1650

1350

1800

1200

1700

1600

1210

2030

1038

2060

WORK PROCEDURE

Locatethe wet unit

A

Assemble the wall,ceiling panel, and cabin door

B

Installthe furniture

C

Install the electricalequipment and cables

D

Inspectionand test

E

Packing

F

Move to storage

G

A B C D E F G

WORK PROCEDURE OF PREFABRICATION

WORK FLOW

Storage and LoadingSTORAGE

LOADING

Suggested storage method for SEJIN Prefabircated Cabins- To be stored indoors, i.e. warehouse- To be stored in a dry and clean environment- To be stored above floor level at least 150 mm- To be stored by area or cabin number for ease of access or by delivery schedule.

Using proper lifting device, i.e. folk-lift truck, to transfer SEJIN prefabricated cabin. A proper fork-lift truck with long flat forks.The forks should be long enough to extend at least 50mm over the other end of the cabin once the cabin is lifted onto the forklift truck. Fasten the prefabricated cabin onto the truck with belt or robe to stabilize the unit. Do not climb on to the top of the unit during fastening.

15 16

PREFABRICATION PROCESSPREFABRICATION PROCESS PREFABRICATION PROCESS

Storage01

Loading02

Clean the site before Assemble

Clean the site where assemble will occur. Make sure enough space andheight are reserved for free movement. Remove all unnecessary objectsfrom the site before cabin installation.The following works are be finished before installation:(Insulation, Main cable installation, Duct, Plumbing, and Window opening)Mark the cabin position exactly.

03

Moving Cabin on to Right Position05

Fixing on to Deck06

Connection of the Technical System07

Use a transportation device to move cabin to desired location.

During transportation, special care should be taken to supportthe cabin and prevent collision with other objects.Make sure that the cabin is positioned correctly and check with windows.

Make window opening and window box can be installed.

The piping and the e lect ical connection sha l l be made in the service

Finish work & Inspection of Cabin08P lace carpet or viny l on the floor. (include skirt)Furniture p lacement, door adjustment and c leaning of the cab in. Inspect each cabin with the customer according to the FAT procedure

Lifting04Remove the S.Q tube pallet before lifting.Clear the lifting site to ensure safe lifting operation.The prefabricated cabin shall be lifted by means of special lifting device maintaining balance throughout.The lifting shall be carried out with caution and safety considerations.

Suggested storage methods for SEJIN Prefabricated Cabins

- To be stored indoors, i.e. warehouse- To be stored in a dry and deen environment- To be stored aboce floor level at least 150mm- To be stored by area or cabin number for ease of access or by delivery schedule.

Using proper lifting device, i.e. folk-lift truck, to transfer SEJIN prefabricated cabin.A proper fork-lift truck with long flat forks.The forks should be long enough tp extend at least 50mm overthe other end of the cabin once the cabin is lifted onto the forklift truck.Fasten the prefabricated cabin on to the truck with belt or robe to stabilize the unit. Do not climb on to the top of the unit during fastening.

Lay temporary support to start work.The position of cabin can be adjusted using steel adjustment device.Tack welding to steel deck.Fill in fire sealant between deck and cabin base frame to satisfyB-Class construction standards.

17 18

INSTALLATIONINSTALLATION INSTALLATION

REFERENCE Reference

REFERENCE

2019

EDDAACCOMMODATION VESSEL

RULE &REGULATIONSHIP YARD

DELIVERY

SHIP TYPE

SHIP OWNER EDDA ACCOMMODATION

DNV.GL COMFORT CLASS V(1)HHI

MAY-2016

ACCOMMODATION VESSEL

CLASS DNV.GL

RULE

MAERSK JACK-UP RIG Standard

RULE &REGULATIONSHIP YARD

DELIVERY

SHIP TYPE

SHIP OWNER MAERSK

NORSOK STANDARD

DSME

JUN-2016

JACK-UP RIG

CLASS DNV.GL

REFERENCE Reference

MOHO NORD

RULE &REGULATIONSHIP YARD

DELIVERY

SHIP TYPE

SHIP OWNER TOTAL

SOLAS STANDARDS

HSHI

AUG-2015

FPU

CLASS BV

RULE

WEST MIRA Standard

RULE &REGULATIONSHIP YARD

DELIVERY

SHIP TYPE

SHIP OWNER SEA DRILL

NORSOK

HSHI

APL-2015

SEMI-RIG

CLASS DNV.GL

REFERENCE

2221

2423

REFERENCE Reference

REFERENCE

RULE

GOLDEN EAGLE

RULE &REGULATIONSHIP YARD

DELIVERY

SHIP TYPE

SHIP OWNER NEXEN

UKOOA

SLP (UK)

FEB-2013

FIXED PLATFOM

CLASS DNV.GL

RULE

BOLLSTA DOLPHIN

RULE &REGULATIONSHIP YARD

DELIVERY

SHIP TYPE

SHIP OWNER FRED OLSEN

NORSOK

HHI

MAR-2015

SEMI-RIG

CLASS DNV.GL

Standard

OHSAS 45001 : 20182625

ISO 14001 : 2015

ISO 9001 : 2015

Supporting everywhere in the world

2827

Ideal Locations for Global MarineBusiness Operation

Republic of Korea

Malaysia

China

IndiaSingapore

Indonesia

Greece

Nigeria

Denmark

France

UKAmerica

CONTACT US