preferred utilities manufacturing corp. 31-35 south street danbury ct fuel oil handling systems...
TRANSCRIPT
Preferred Utilities Manufacturing Corp.
31-35 South Street • Danbury • CTwww.preferred-mfg.com
Fuel Oil Handling Systems
Tank Gauges and Leak Detection
Tank Gauge
D3 Tank Gauge Single Tank
Applications Wire Float
Available for Limited Tank Clearance
Standard 4-20 mA output
D3
D5 Tank Gauge
Monitoring Up to 48 Tank Levels, Discriminating Leaks or Temperatures
Wire Float Level Sensor
Wire Float Level Sensor
Requires only 14 Inches of Head Room Reads tanks 36 to 145 inches Tall Buna-N Float Requires only a 4 inch 125# Flange Easy to Install and Calibrate Can Be Installed in an Empty or Full Tank Can be mechanically tested in place Intrinsically Safe
Versatility Solves Site Problems
Main Sump
Tank Gauge Installation
Underground Storage Tank (UST) Pipe leak detection requirements, pitch double wall pipe
containment to the piping sump on the tank Typical pipe pitch is 1/8”/ft, long linear runs could present
problems, might require a second sump All tanks
Discriminating leak detector for the Dry Interstitial space of the tank
Fuel Leak Detection
Fuel Leak Detection
Leak Sensor Test Module
HD-A1 Leak Detector
Factory Mutual Approved Intrinsically Safe Monitors for both Oil and Water Three Detectors per Tank Gauge Manual Testing of Unit Completely Potted for Long Life Fail Safe Circuitry
Level 3 Day Tank
Leak Sensor
Interstitial Space Leak Sensor
Floor Leak Detector
2nd Manhole with Tank Access & Leak Detectors
Leak Sensor Close-up
Leak Detector
Leak Sensor Test Modules
Double Wall Containment Piping
Day Tank Vent Detector
Pump Set Leak Detector
Single Source Fuel Handling
Preferred Utilities Manufacturing Corp
31-35 South Street • Danbury • CTT: (203) 743-6741 • F: (203) 798-7313
www.preferred-mfg.com