The Advantages:• Easy to handle:

Low-weight and highly flexible, the pipe can be installed around almost any obstacle.

• Easy to assemble: No special tools required - just two spanners.

• Rapid work progress: Up to 200m joint-free installation.

• Cut to length service: Tailor-made lengths to your requirements, delivered directly to site.

• Full design service: Pipe sizing and material take-offs.

Corrosion proof, oxygen impermeable carrier pipe made of PE-X material

The two coloured ‘dog bone’ prevents mix ups in fl ow and return connections

Excellent low weight PE-X foam heat insulation

Ribbed jacket pipe made of impact proof polyethylene. Very fl exible with high load

bearing capacity

General EnquiriesFor sales and literature, or for an initial discussion about your project, please call, fax or email:-Tel: 01455 550355Fax: 01455 550366Email: enquiries.uk@uponor.com

Contact Details

Independent inspection organisations certify that our products meet the strictest standards.

Pre-Insulated Pipe Composition

Pre-Insulated Pipe SystemsFROM A TO B WITHOUT LOS ING OC

UPI

P-D

L-07

-201

2

better insulation

Up to

12 %

New insulation foam

Uponor Limited

Head Offi ce, Gilmorton Road, Lutterworth, Leicestershire, LE17 4DU

T 01455 550355E enquiries.uk@uponor.comW www.uponor.co.uk

Uponor Pre-Insulated Pipes - the only choice for economical transport of hot and cold fluids for both domestic and commercial applications.

Besides excellent insulating efficiency, our light-weight Pre-Insulated pipes offer flexibility, ease of installation and a service life in excess of 25 years.

Suitable for the following:• Heating water • Hot tap water• Cooling water• Industrial fluids

Applications:• District heating• Remote boilers• Biomass• CHP• District cooling

Tailor-made lengthsNo need to order full coils.Our cut-to-length service will meet your exact specifications, saving you time on site.

No on-site cutting. No wastage. No disposal costs.

What you order will be delivered as quickly as possible to where you need it.

• Single PEX pipe with EVOH for heating water. Max. 95oC/6 bar, with small jacket pipe.

• Carrier pipe 25 and 32 ø mm.

• Trace heating cable available on request.

Thermo Mini

• Twin PEX pipe with EVOH for fl ow and return lines for heating water.

• Max. 95oC/6 bar.

• 25/25, 32/32, 40/40, 50/50, 63/63 ø mm.

Thermo Twin

• Single PEX pipe with EVOH for heating water. Max. 95oC/6 bar.

• Carrier pipe 25-110 ø mm

• Trace heating cable available on request.

Thermo Single

• Single PE-100, Max 20oC/16 bar for potable water, cold water, waste water transport, cooling water.

• 25-110 ø mm frost protection cable on request.

Supra

• For heating water and potable water (warm), Max. 95oC/10 bar 4 line pipe, combination of Thermo Twin and Aqua Twin.

• Suitable for building connection from mains via chamber.

Quattro

• PEX pipe for potable water, hot water Max. 95oC/10 bar.

• Hot water and circulation pipe in one jacket.

• Carrier pipe 25/25, 32/25, 40/25 and 50/25 ø mm.

Aqua Twin

• PEX pipe for potable water, hot water Max. 95 oC/10 bar.

• Carrier Pipe 25, 32, 40, 50, 63 ø mm.

• Trace heating cable available on request.

Aqua Single

The Uponor Pre-Insulated Pipe product range is summarised below. Supported by a range of accessories including couplings, wall sleeves and insulation kits, we have everything you need for a complete system.

Full details from your merchant or contact Uponor directly.

Uponor Pre-Insulated Pipe Pipe Product Range