preisliste evolution 7405 evolution 7405.pdf · preisliste_evolution_7405 prices in euro . valid...

Preisliste_EVOLUTION_7405 Prices in Euro

Valid from 01.02.2016 page 3 from page 16 Edition 250120160,7275

table of contents

BASIC MACHINE .......................................................................................................................................................... 5

TECHNICAL DATA ........................................................................................................................................................ 6

MACHINE OPERATION ................................................................................................................................................ 6

SOFTWARE .................................................................................................................................................................. 6

HOLZ-HER SOFTWARE CABINETCONTROL PRO .................................................................................................... 7

CONTROL SYSTEM ..................................................................................................................................................... 8

DRILL AGGREGATES .................................................................................................................................................. 9

ROUTING UNIT ........................................................................................................................................................... 11

MACHINE ELECTRICAL ............................................................................................................................................. 11

EQUIPMENT VARIANTS AND ACCESSORIES ......................................................................................................... 12

TOOL KITS .................................................................................................................................................................. 13

GUARANTEE .............................................................................................................................................................. 14

PACKAGING ............................................................................................................................................................... 14

SERVICE ..................................................................................................................................................................... 14

GUARANTEE .............................................................................................................................................................. 15



Vertical Machining Center EVOLUTION 7405 4mat

BASIC MACHINE 5038440

Basic Machine - EVOLUTION 7405 4mat Working length 3200 mm

52.800

Vertical CNC machining center for drilling, milling and grooving Utmost flexibility and universal usage with little space requirement

State-of-the-Art industrial design, built from high quality components with optimized visibility of the working field and perfect access to the tooling

Solid welded machine frame with grounded prismatic guidance system at travelling column, aggregate head and consoles Ball roller spindles in X-, Y- and Z-directions for precise positioning and perfect workpieces

Smooth vacuum handling of the workpieces with automated positioning of the vacuum cups (2 x 80/80 + 2 x 80/40 mm). Extremely short set-up times.

Fixation of workpieces in the back allows for milling workpieces around the whole perimeter incl. horizontal drilling without re-clamping (up to 1375 mm workpiece length). Leading to fastest working cycles and highest precicions.

CNC-controlled adjustment to workpiece thicknesses from 8 to 70 mm

1 working field with length stop

5038442

Workpiece support 1 roller beam for support from the bottom 5 roller beams for smooth material support of panels

5042034

Adjustable Infeed Roller Fence for 4-sided milling Complete formatting of workpieces via precision milling of a 4 workpiece edges



5041488

Diamond Formatting Toolset - EVOLUTION Formatting Left Turning: 1 x Diamond router bit Z1 +1, dia. 16 mm, shaft Ø = 25 mm, UL 43, TL 115, LT Collet: 1 x Collet 25 x 52

Dust extraction at working head 1 ea. Dust duct Ø 120 mm at milling head plus Ø 140 mm behind drill block, connection to top 1 ea. Dust duct below with Ø 120 mm and connection to the back or left side

Safety cover according to CE-regulations Circumferential machine cover with window and safety lock at door

TECHNICAL DATA Workpiece Size:

X = 200 - 3200 mm (longer with additional support) Y = 70 - 920 mm Panel Thickness: Z = 8 to 70 mm Max. machining in X-direction without re-clamping: X = 1500 mm Z-stroke: Z = 240 mm Max. programmable feet rate: Vector Speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min

MACHINE OPERATION SOFTWARE 5041765

CAMPUS Single Evolution Software for CNC machine EVOLUTION type with automated generation of the machining cycles for each workpiece 1 ea. machining license - secured via license dongle Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter 5. CAMPUS Machining Simulation



CAMPUS NC-HOPS Variant graphics system with WOP and CAD/CAM properties for creating parts variants using macro technology

5041550

CabinetControl Base Software for furniture planning and production Generation of furniture designs (single cabinet) (may consist of up to 1 cabinet with 3 intermediate walls) Can be called directly from CAMPUS Automatic generation of NC-HOPS data Extension for CAMPUS V6 - EVOLUTION Machine licence

310

5033120

CAMPUS software 1x licence incl. CabinetControl Base and processing simulation 1 ea. software license with USB-dongle for the office CabinetControl Base Software for furniture planning and production Generation of furniture designs (single cabinet) (may consist of up to 1 cabinet with 3 intermediate walls) Can be called directly from CAMPUS Automatic generation of NC-HOPS data CAMPUS, software for CNC machining centers Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS Workcenter 4. CAMPUS MT-Manager 5. CAMPUS 3D processing simulation CAMPUS NC-HOPS Variant graphics system with WOP and CAD/CAM properties for creating parts variants using macro technology

3.320

HOLZ-HER SOFTWARE CABINETCONTROL PRO Software for furniture planning and production

5015277

HOLZ-HER CabinetControl PRO - Dongle Version Supplied with CD and USB hardlock for use on one respective workstation Generation of furniture designs (individual cabinet) (can consist of up to 15 cabinets with 9 carcasses) Construction can be carried out directly in the drawing. Carcasses with diagonal lines (e.g. corner cabinets with different leg lengths or angled corner cabinets) Integration of corner cabinets in one carcass line Generation of cabinets for diagonal ceiling lines (construction of cabinets at gable end) Generation of cabinets for diagonal ceiling lines (construction of cabinets below the eaves) (limited transfer to CNC machines) Generation of cabinets with a height offset Generation of cabinets with a diagonal side finish Use of predefined fittings (predefined by the customer) Use of drag-and-drop libraries for faster planning of kitchen and

4.250



furniture (predefined by the customer) Different statements within a cupboard module eligible. Output of parts lists to Excel Export of CNC files to HOLZ-HER CNC machines using the CAMPUS software Export of cutting data to HOLZ-HER beam saws

Display of the generated carcass in 2D mode Dimension displays in front and plan view Display of the generated carcass in 3D mode as a view of the surface or structure Exploded view in 3D mode Parallel cost calculation Parallel calculation of material and machining operations, (prices are stored for the material and machining operations) Processing of a plurality of cabinets in one room Separate material for left / right side and for top / bottom Presentation of furniture in a home setting Expanded view by rotating or moving the furniture Rotation of veneer direction Creating bars, angled benches and sliding doors Visual display of bars, angled benches and sliding doors (No transfer of design or furniture fitting information to the CNC machining centre or to the beam saw) Printing module for room view and carcass

System requirements: Processor: min. 2 GHz RAM: mind. 1024 MB (1 GB), recommended 2048 MB (2 GB) Graphic cards: nvidia or ATi chip, mind. 256 MB, recommended 512 MB OpenGL capable Operating system: Win 2000 Professional, Win XP Professional, Win 7 CD-ROM drive Screen resolution: min. 1024 x 768 Pixel

CONTROL SYSTEM Remote maintenance:

Network interface card for the transmission of control data and program data. Data transmission is by Internet. Required is an high-speed internet access at the machine. Use of this facility when required during the validity period of the guarantee is free. Control System: PC control CPU Intel Core i3-2120 3,3 GHz SSD 120 Gb Windows 7 Professional

5038956

21,5" flat screen monitor 16:9 For easy and simple machine usage

5039592

Manual operating unit for machine remote control with the following operating functions:

715



> Start / Stop of processing program > Processing cycly speed rate control > Re-set key > Manual feed / Rapid feed for all axes > Emergency cut-off function

5041857

Manual operating unit for machine remote control Retrofit kit for later installation on installed EVOLUTION with the following operating functions: > Start / Stop of processing program > Processing cycly speed rate control > Re-set key > Manual feed / Rapid feed for all axes > Emergency cut-off function

780

USB Connector for data protection (backup) and / or direct input of processing datas at the control panel

5005551

2D bar code scanner laser class 2, incl. software, interface processorwireless, for mobile use Standard bar codes: Code 39, Code EAN 128 2D codes: DataMatrix, PDF41

2.290

DRILL AGGREGATES 5038470

Drill Aggregate 7883, 15 Spindles Motor Power 1,5 kW

9 Vertical Spindles ea. can be triggered separately



positioned in L-form, 5 in X- and 4(5) in Y-direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from end of thread (depending on panel thickness) Spindle stroke: 70 mm Turning direction: right- / left-turn changing RPM(max.) 1000 - 4400 min-1 infinitely variable Connector: M 10 thread - fit 11 mm Without tooling - without tool holder

6 Horizontal Spindles 2 double drill spindles in X-direction 1 double drill spindle in Y-direction Connector: M 10 thread - fit 11 mm Total drill length: 63 mm from end of thread Without tooling -without saw blade holder Integrated saw aggregate for cutting / grooving in X-direction RPM(max) 1000 - 5650 min-1 infinitely variable Tooling interface: A max Ø = 120 mm, I Ø = 20 mm, B = max. 4,0 mm

5041402

XL Drill Aggregate 7885, 19 Spindles Motor Power 1,9 kW

2.010

14 Vertical Spindles ea. can be triggered separately

positioned in U-form, 5 + 4 in X- and 4(+2) in Y-direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from end of thread (depending on panel thickness) Spindle stroke: 70 mm Turning direction: right- / left-turn changing RPM(max.) 1000 - 4400 min-1 infinitely variable Connector: M 10 thread - fit 11 mm Without tooling - without tool holder

6 Horizontal Spindles 2 double drill spindles in X-direction 1 double drill spindle in Y-direction Connector: M 10 thread - fit 11 mm Total drill length: 63 mm from end of thread Without tooling -without saw blade holder Integrated saw aggregate for cutting / grooving in X-direction RPM(max) 1000 - 5650 min-1 infinitely variable Tooling interface: A max Ø = 120 mm, I Ø = 20 mm, B = max. 4,0 mm



Free spaces in boring unit 7885 can be filled up with

5041425

Duplex drilling spindle in Y-direction With 2 outputs for horizontal drillings in Y-direction Holder: M10 thread - close fit Ø 11 mm Total drill length: max. 63 mm from bolting end Without tool, without holder

1.120

5038496

Vertical adapter with doubled power Max. borer diameter: 35 mm Total length of borer: max. 57 mm from screw-in end (depending on panel thickness) Spindle retraction lift: 70 mm Connector: M 10 thread, press fit Ø 11 mm without tooling, without carrier

765

ROUTING UNIT 5046705

Spindle 7921, Power: 5,6 kW RPM(max.) 1000 - 18000 min-1 infinitely variable Air cooled Tooling interface for collet chuck Ø = 25 mm Collet chuck with right turning threat (for right cutting tooling) Manual tool change via hook wrench 3-fold bearings Tooling weight max. 6 kg (incl. tool holder) Tooling: max. Ø 80 mm, max. tooling length 80 mm

Performance Package consisting of: 7,5 kW Spindle with HSK connector for automated tool changing with 6-position tool changer

6.450

5038471

Router Spindle 7830 Power: 7,5 kW (S6), air cooled with HSK-F 63-connector RPM(max.) = 1000 - 18000 min-1 infinitely variable with collet chuck for HSK-shaft, ceramic bearings (hybrid bearings), Tooling weight max. 6 kg (incl. tool holder) Tooling: max. Ø 80 mm, max. tooling length 80 mm

5048867

Tool changer 7887, 6-position-magazin - Pick-up-System, pneumatic, max. tooling Ø: Ø 80 mm Max. tooling weight: > 5 kg per tool or 30 kg when fully loaded To be loaded with HSK tool holders

MACHINE ELECTRICAL Electric tension 400V, 50/60 Hz



Electric cabinet integrated in machine cover incl. RPM monitoring with safety switch off for all build on aggregates Monitoring of RPM and the max. tooling RPM as per tool data base

5008984

Uninterruptible Power Supply - UPS The UPS is a backup power system which in the event of a sudden voltage drop (e.g. caused by a power failure) ensures that the computer still has enough power to end the operating program properly.

305

5038877

Voltage stabilizer for 24 volt control voltage Necessary for power supply with fluctuations

1.400

5038973

Matching transformer for IT / TT networks, 400 V, 50 / 60 Hz required if the power supply is not grounded.

5.380

5038972

Matching transformer 230 Volt, 60 Hz / 200 - 230 Volt, 50/60 Hz Other voltages by request.

2.960

EQUIPMENT VARIANTS AND ACCESSORIES LUBRICATION

5038499

Manual Lubrication - combined lubrication points For all linear guide ways in X-, Y- and Z-direction For all ball bearing spindles in X-, Y- and Z-direction

5038975

Automatic centralized lubrication Automatic central lubrication unit, after defined lubrication intervals Simultaneous lubrication for all linear guides in X, Y and Z axes for all ball roller spindles in Y and Z axes for all cutter spindles guides for tool changer guides (except for pick-up tool changer)

1.060

All console guides are not lubricated

5038498

Vacuumsystem ECO, Single circuit Vacuumsystem, 8 m³/hour - Energy efficient creation of vacuum via vacuum-pump. Low energy cost when machine is in long term use.

5041572

Workpiece length detection unit LASER for precision measurement of the end of the workpiece inside the machine. Software controlled positioning to set dowel-, line-drills etc. exactly from the end of the workpiece.

525

5038500

Heat Exchanger for Electric Cabinet Up to 32° celsius surrounding temperature. For higher room temperatures we highly recomend using the aircondition from the option list.

5038501

Air Condition for Electric Cabinet (necessary from 50° celsius in the electric cabinet)

965

Vacuum cups Evolution

5009431

Vacuum suction unit Cup 1 INNOSPANN, with plunger valve 80 x 80 mm, for vacuum suction unit INNOSPANN complete

93

2936232

Vacuum suction Cup 1 INNOSPANN, 80 x 80 mm

84

5009441

Vacuum suction unit Cup 2 INNOSPANN, with plunger valve

93



80 x 40 mm, for vacuum suction unit INNOSPANN complete

2936240

Vacuum suction Cup 2 INNOSPANN, 80 x 40 mm

84

2936259

Vacuum suction Cup 3 INNOSPANN, 80 x 28 mm for aluminum base plate (Mat. Nr. 502 98 60)

84

5009443

Additional vacuum cover

16

Vacuum suction plates Evolution

5041251

Vacuum sucction plate lengthwise 190 x 64 mm, incl. aluminum base platte and support plate with grid. Vacuum field can be modified using the rubber gasket.

280

5041252

Vacuum sucction plate square 175 x 175 mm, incl. aluminum base platte and support plate with grid. Vacuum field can be modified using the rubber gasket.

310

TOOL KITS 5041486

EVOLUTION - Tool kit for standard drill head 7883 Sawing / grooving: Ø = 120 mm, I Ø = 20 mm, W = 4,0 mm Z = 30 Vertical: Line drilling / general drilling 2x HW-Dowel drill, Ø = 5 mm, UL 28 mm, TL 55,5,LT 2x HW-Dowel drill, Ø = 5 mm, UL 28 mm, TL 55,5 RT 1x HW-Dowel drill, Ø = 8 mm, UL 28 mm, TL 55,5 LT 1x HW-Countersink, Ø = 3 mm, TL 55,5 RT 1x HW-Drill left, Ø = 10 mm, TL 55,5 LT 1x HW-Through holes, Ø = 5 mm, TL 55,5 RT 1x HW-Hinge hole, Ø = 35 mm, TL 50 RT 1x HW-Hindge hole, Ø = 15 mm, TL 50 LT Horizontal: Construction holes / general drilling 3x HW-Dowel drill M10, Ø = 8 mm, UL 35 mm, TL 75 LT 3x HW-Dowel Drill M10, Ø = 8 mm, UL 35 mm, TL 75 RT Tool holders: 4x adapter for drill M10 (left), with shaft Ø 10 mm 5x adapter for drill M10 (right), with shaft Ø 10 mm

725



5041487

EVOLUTION - Tool kit for XL-drill head 7885 Sawing / grooving: Ø = 120 mm, I Ø = 20 mm, W = 4,0 mm Z = 30 Vertical: Line drilling / general drilling 3x HW-Dowel drill, Ø = 5 mm, UL 28 mm, TL 55,5,LT 3x HW-Dowel drill, Ø = 5 mm, UL 28 mm, TL 55,5 RT 2x HW-Dowel drill, Ø = 8 mm, UL 28 mm, TL 55,5 RT 1x HW-Countersink, Ø = 3 mm, TL 55,5 RT 1x HW-Drill left, Ø = 10 mm, TL 55,5 LT 1x HW-Through holes, Ø = 5 mm, TL 55,5 RT 1x HW-Hinge hole, Ø = 35 mm, TL 50 RT 1x HW-Hindge hole, Ø = 20 mm, TL 50 LT 1x HW-Hindge hole, Ø = 15 mm, TL 50 LT Horizontal: Construction holes / general drilling 4x HW-Dowel drill M10, Ø = 8 mm, UL 35 mm, TL 75 LT 4x HW-Dowel Drill M10, Ø = 8 mm, UL 35 mm, TL 75 RT Tool holders: 6x adapter for drill M10 (left), with shaft Ø 10 mm 8x adapter for drill M10 (right), with shaft Ø 10 mm

950

5041488

Diamond Formatting Toolset - EVOLUTION Formatting Left Turning: 1 x Diamond router bit Z1 +1, dia. 16 mm, shaft Ø = 25 mm, UL 43, TL 115, LT Collet: 1 x Collet 25 x 52

350

GUARANTEE The warranty period for the machine is 12 months for one-shift

operation.

10 year warranty on linear guidings Excluded are damages to the system due to improper operation and/or due to insufficient cleaning and maintenance. The extended warranty is limited to single shift operation.

PACKAGING 5038982

Packaging standard Machine on palette or wooden frame, wrapped in foil

5038452

Container packing up to a machine length of 4,05 m machine on palet or wooden frame wrapped in special foil Packing measures optimized to sea container

154 *

Packing suitable for ocean-shipments in containers (FCL . Kalsdorf to final destination) without unloading in depots

SERVICE ZS00

Training: Training in-house HOLZ-HER 3 days, max. 4 people, incl. refreshments and lunch, excl. hotel Content: - CNC basics - CAMPUS HOPS fundamentals - MT Manager - CAMPUS aCADemy and DXF interface

1.950 *



- CabinetControl Base

ZI00

Installation and training per day incl. expenses, plus hotel costs, plus costs for flight/car, etc., plus costs for the time taken to travel to and from the site Concerning installations from the 11th hour we calculate a surcharge of 25%. The daily working day of 10 hours can be exceeded only for proven operational reasons. The customer must provide two people to help with assembly. Works to be done before installation from customers side: Unpacking, electrical, pneumatic and dust extraction connection. Work which is not covered from the standard installation will be invoiced separately. not included: Unloading installation of other tools and units network connectivity / configuration data transfer / Interface programming to other programs

790 *

ZI00

Installation, operation and training The customer must provide two people to help with assembly. Works to be done before installation from customers side: unpacking, electrical, pneumatic and dust extraction connection. Work which is not covered from the standard installation will be invoiced separately. Not included: > installation of other tools and units > network connectivity / configuration > data transfer / Interface programming to other programs Plus hotel costs Plus costs for flight/car, etc. Plus costs for the time taken to travel to and from the site (invoiced)

Factory Approval: Standard factory approval (1 day) at our production facility Voitsberg near Graz (A), without hotel accomodation. Special materials have to be supplied at least 2 weeks before date of factory approval by client

1.490 *

Service rate for on-site service on HOLZ-HER machines Travel time, installation- and training on site / hourly rate (Monday through Friday)

79 *

Charge per kilometer driven (with company car) 0,80 € / km

TERMS OF DELIVERY

FCA, [free carrier] A-8401 Kalsdorf

ICC Incoterms 2010, packed and loaded

GUARANTEE The warranty period for the machine is 12 months for one-shift

operation.

preisliste evolution 7405 evolution 7405.pdf · preisliste_evolution_7405 prices in euro . valid...

Documents