preliminary design review heidi, cara, lauren, juan, andres, joe, aras
TRANSCRIPT
Preliminary Design Review
Heidi, Cara, Lauren, Juan, Andres, Joe, Aras
Introduction and Objectives
• Micro Air Vehicle: fixed & rotary-winged
• Controlled from the ground
• Research made on MAVs
• To design an aircraft with no help of human manipulation
• Define: Human Manipulation
• Used for various purposes
Design Requirements
•Maximum weight of vehicle is 450 g.•Ground takeoff and landing is required (no
tossing)•The vehicle must be able to fly for at least 5
minutes without recharge.•The vehicle will be controlled by a 2.4G Hz
radio transmitter
Design Requirements (cont’d)
•The vehicle must fly a figure 8 path around two pylons.
•The total cost must be less than $250•A camera mount must be provided.
Project TimelineTasks Responsible Person Start Date Duration (Days) End Date
Start Information All Group Members 9/10/2012 1 9/10/2012
Brain Storming All Group Members 9/17/2012 3 9/19/2012
Preliminary Design All Group Members 9/24/2012 1 9/24/2012
Purchase Trainer Cara 10/15/2012 1 10/15/2012
Training Flight All Group Members 10/21/2012 21 11/17/2012
Preliminary Design With Sketches Juan 9/26/2012 2 9/28/2012
Preliminary Design Review All Group Members 10/1/2012 2 11/5/2012
Detailed Design Heidi 11/6/2012 4 11/10/2012
Purchase Materials Cara and Aras 11/11/2012 1 11/11/2012
Build, Test, Document All Group Members 11/17/2012 31 12/17/2012
Submit Report All Group Members 12/19/2012 1 12/19/2012
Presentation All Group Members 12/19/2012 1 12/19/2012
Gantt Chart
Bill of Materials Total: $200
Quantity Description Cost Sub-Total
1 Night Vapor Trainer $125 $125
1
1
1
1
Transmitter and Receiver
Dynam Brushless motor+18A ESC+3pcs 9g servos for RC Park Flyer
Sky Lipo 1000mAh 11.1V 20CBattery
GWS Slow Stick, No Power System Airplane
Loan for MC Engineering Dept.
$30
$10
$35
Camera Mount Elevator
FuselageHorizontal Stabilizer
Leading Edge Support
Motor Mount
Rudder Tail Gear Support
Trailing Edge SupportVertical Stabilizer
Tail Assembly