premier workplace solutions catalogue
DESCRIPTION
View our range of Safety Equipment.TRANSCRIPT
1
PREMIER WORKPLACE SOLUTIONS
T. 09 402 6750 F. 09 402 6751
Cable ManagementTrip Prevention
Convex MirrorsPedestrian and Traffic Safety
Dome MirrorsSecurity and Safety
General Safety
www.pwsonline.co.nz
CableManagement
Pedestrian and Traffic Mirrors
Security and Safety Mirrors
General Safety
CABLE MANAGEMENT SYSTEMSwww.cablecovers.co.nz
These cable protectors are ideal for office and pedestrian applications, both permanent and temporary.
Simply lay your cables down and drop the cable protector over the top of the cables. This system features interlocking nodules which allow you to construct the system to your required length.
Their ease of use makes them ideal for temporary applications where you are likely to be moving them frequently, so ideal for board room and event applications.
Available in two anti-slip styles:
• Ribbed anti-slip profile in black
• Tread plate surface in either black or yellow.
Lengths vary according to style. A minimum order of two lengths apply.
CP2
CP2HAZ
Protect important cables and leads, and help eliminate the risk of trips and falls from loose cabling with our range of cable protectors.
Made from extruded durable black rubber these cable protectors are flexible and lightweight making them easy to install or remove.
There are different sizes which make them ideal for applications from offices and boardrooms through to warehouses and factories. The smaller cable protectors will comfortably protect network data cables, phone and standard power cables. The larger cable protectors will fit 3-phase power cables, compressed airlines and hoses.
Cables are simply inserted via slits on the underside of the protector. For added visibility we can add an anti-slip highlighting tape.
Cable protectors are cut to length to suit your application. A minimum order of 2 metres applies.
SAFCORD® TRIP PREVENTION SYSTEMSafcord® nylon cable covers provide a solution to securing electrical and data cables to looped carpet. This innovative hook and loop method allows you to fasten the cables in place without the use of adhesives that leave a messy residue on your carpet.
The industrial grade nylon fabric is tough and stands up to almost anything. It is also washable and re-useable. The durable filament hooks hold fast, even staying in place during vacuuming. Safcord can be used on stairs or curved surfaces with ease. It works well on loop carpet, commercial grade rugs, and Berber carpet. Safcord will not work with cut pile carpet.
The Safcord comes in 1.8 metre or 9 metre lengths in three colours (Grey, Blue or Yellow). It’s design allows you to cut it to any length without unraveling.
DROPOVER CABLE PROTECTORSECONOMY CABLE PROTECTORS
CP4HAZ
CP5
SEE OUR SELECTION GUIDE AND TECHNICAL SPECIFICATIONS OVER THE PAGE
CP7
1
SELECTION GUIDE:
Product Specifications: Style No.
Power cables Applications/Cable type
CP21-2
Power Cables
• Ideal for offices, boardrooms and computer rooms• Comfortably protects a network data cable, phone cable and
standard power cable (one of each)• Available cut to length, minimum order 2 metres.
CP33-4
Power Cables
• Ideal for offices, boardrooms and computer rooms• Comfortably protects a network data cable, phone cable and
standard power cable (multiples of each)• Available cut to length, minimum order 2 metres.
CP4
4-5
Power Cables
and/or
Hoses
• Ideal for offices, warehouses and factories• Comfortably protects multiple network data cables, phone
and power cables, 3 phase cables, compressed airlines and water hoses
• Available cut to length, minimum order 2 metres.
CP5
4-8
Power Cablesand/orHoses
• Ideal for warehouse, factory and external applications• Trafficable (light traffic only)• Comfortably fits two 3-phase power cables or two
compressed airlines• Available cut to length, minimum order 2 metres.
CP6
4-5
Power Cablesand/orHoses
• Suitable for warehouse, factory and external applications• Ideal for protection of hoses• Trafficable (light traffic only) with minimum compression• Available cut to length, minimum order 2 metres.
CP7 4-5
Power Cables
• Dropover cable protector with ribbed profile• Ideal for office and pedestrian applications• Simply drop over the top of cables• Great for temporary and permanent applications• Available in 1 metre inter-locking lengths, minimum order 2
lengths.
CP124-5
Power Cables
• Dropover cable protector in black or yellow• Anti-slip checker tread plate surface• Simply drop over the top of cables• Ideal for office and pedestrian applications• Available in 1 metre inter-locking lengths, minimum
order 2 lengths.
CP88-10
Power Cables
• Dropover cable protector ribbed profile• Ideal for office and pedestrian applications• Simply drop over the top of cables• Great for temporary and permanent applications• Available in 1.2 metre inter-locking lengths, minimum order
2 lengths.
CP138-10
Power Cables
• Dropover cable protector in black or yellow• Anti-slip checker tread plate surface• Office and pedestrian applications• Simply dropover top of cables• Available in 1 metre inter-locking lengths, minimum
order 2 lengths.
SAF/1.8
SAF/9.0
3
Power Cables
• Available in Blue, Grey or Yellow • Precut in a 1.8 or 9 metre lengths• Secures cables to looped carpet• Industrial grade nylon fabric• Can be cut to any length without unravelling.
CABLE MANAGEMENT SYSTEMSwww.cablecovers.co.nz
2
TRAFFICABLE CABLE PROTECTORS
These lead hooks are ideal for keeping cables, leads and hoses off the ground, assisting in Occupational Health and Safety compliance. They are manufactured from a non-conductive, highly visible and durable plastic material.
The two larger hooks will accommodate cables and hoses up to 20mm in diameter, whilst the smaller ‘clip style’ hooks are ideal for standard power cables.
An economical cable cover for permanent and semi-permanent applications, this 300mm wide speed hump style cable cover features two cable channels. Each channel is 31mm wide by 24mm high. The 1200mm long modules feature 3 recessed fixing points and built-in reflectors for added visibility.
This cable protector is suitable for light to medium vehicle applications.
ECONOMY VEHICULAR CABLE COVER
LEAD HOOKS
Part No. StyleCPT1200 Cable protector/speed hump, 1200mm long
Part No. StyleCPLHK Plastic lead hooks, available individually or in packs, see website for
details.
Part No. StyleCP10 105mm Wide, 30mm High, 20mm Diameter channel, 10 metre roll
CP11 170mm Wide, 53mm High, 38mm Diameter channel, 4 metre roll
This medium size extruded rubber cable protector is designed to aid vehicles in safely crossing cables. Simply roll out the cable protector and insert the required cables through the slit in the top. The cables are then enclosed within the protector reducing the risk of damage to the cables. Supplied in 10 metre rolls, they can easily be cut to length.
This large size extruded rubber cable protector is designed to aid vehicles in safely crossing cables. Simply roll out the cable protector and insert the required cables through the slit in the top. The cables are then enclosed within the protector reducing the risk of damage to the cables. Supplied in 4 metre rolls, they can easily be cut to length.
SpecificationsLength 10 metre roll
Height 30mm
Width 105mm
Weight 15.5kg
No. of channels 1
Channel height 20mm
Channel width 20mm
SpecificationsLength 4 metre roll
Height 53mm
Width 170mm
Weight 17.3kg
No. of channels 1
Channel height 38mm
Channel width 38mm
CP10 CABLE PROTECTOR
CP11 CABLE PROTECTOR
CP10
CP11
CABLE MANAGEMENT SYSTEMSwww.cablecovers.co.nz
3
3 CHANNEL CABLE & HOSE PROTECTOR
Occasionally you just can’t avoid running cables or hoses across the floor. To help with these applications we offer a 3 channel cable and hose protector designed to protect valuable cables and hoses from vehicle damage and provide safe passage for pedestrians and vehicles across your cables and hoses.
It’s non-conductive, rubber and polyurethane construction makes it suitable for high volume pedestrian and low to medium volume, light to medium weight vehicle applications. Its modular, interlocking design allows you to construct cable protection systems to suit your needs. Each module features four fixing points to help secure the cable cover in more permanent applications. This system features left and right 45 degree turning sections and end caps.
• Large channels to suit a variety of cable and hose sizes• Suitable for indoor or outdoor use• Checker plate pattern for increased traction• Easy to interlock with highly visible colour• Non-conductive construction• Hinged lid for easy access to cables• Fixing holes for more permanent applications.
SpecificationsLength 900mm
Height 75mm
Width 600mm
Weight 20kg
No. of channels 3
Channel height 55mm
Channel width 60mm
Part No. StyleCP3CH Cablesafe cable protector body
CP3CH/LT 45° left turn module
CP3CH/RT 45° right turn module
CP3CH/EC End caps (pair)
2 CHANNEL CABLE & HOSE PROTECTOR
This 2 channel cable protector is designed to protect cables and hoses from vehicle damage and provide safe passage for vehicles across potentially hazardous cables.
These are ideal for temporary and permanent applications. Our cable protectors are non-conductive, plastic and polyurethane construction making them suitable for high volume pedestrian and low to medium volume, light to medium weight vehicle applications.
The modular, interlocking design allows you to construct a cable protection system to suit your needs. Each module features four fixing points to help secure the cable protector in more permanent applications.
• Suitable for indoor or outdoor use • Checker plate pattern for increased traction • Easy to interlock with highly visible colour • Non-conductive construction • Hinged plastic lid for easy access to cables • Fixing holes for more permanent applications.
SpecificationsLength 1000mm
Height 45mm
Width 250mm
Weight 7.5kg
No. of channels 2
Channel height 30mm
Channel width 30mm
Part No. StyleCP2CH Two Channel cable and hose protector
CP2CH/LT 45° left turn module
CP2CH/RT 45° right turn module
CABLE MANAGEMENT SYSTEMSwww.cablecovers.co.nz
4
5 CHANNEL ECONOMY PROTECTOR
These moulded rubber cable covers are an excellent economical counterpart to their polyurethane cousins. They are suitable for pedestrian traffic and occasional light vehicles (we would not recommend them for heavy vehicles or frequent traffic applications). The system features a ‘snap-lock’ hinged lid to keep those cables and hoses secure, a unique interlocking mechanism, and end pieces for a smooth transition.
• Highly visible colour• Non-conductive construction• Hinged lid for easy access to
cables• Fixing holes for more permanent
applications.
SpecificationsLength 910mm
Height 50mm
Width 500mm
Weight 17.5kg
No. of channels 5
Channel height 31mm
Channel width 35mm
5 CHANNEL CABLE PROTECTOR
Part No. StyleCPPL5CH 5 Channel cable protector - standard plastic lid
CPPL5CH/LT 45 Degree Left Turn
CPPL5CH/RT 45 Degree Right Turn
CPPL5CH/EC End caps (pair)
This 5 channel cable and hose protector is ideal for when you need to run a number of cables and hoses across the floor. This cable protector will protect your valuable cables from both pedestrian and vehicle traffic. It also provides safe passage for pedestrians and vehicles across potentially hazardous cables.
It’s non-conductive, rubber and polyurethane construction makes it suitable for high volume pedestrian and low to medium volume, light to medium weight vehicle applications. Its modular, interlocking design allows you to construct cable protection systems to suit your needs. Each module features four fixing points to help secure the cable cover in more permanent applications. The system features left and right 45 degree turning sections and end caps.
• Checker plate pattern for increased traction - easy to interlock
• Highly visible colour• Non-conductive construction• Hinged lid for easy access to
cables• Fixing holes for more permanent
applications.
SpecificationsLength 900mm
Height 75mm
Width 590mm
Weight 16kg
No. of channels 5
Channel height 50mm
Channel width 35mm
L R
CABLE MANAGEMENT SYSTEMSwww.cablecovers.co.nz
Part No. StyleCP5CH 5 channel cable protector with pair connectors - rubber lid
CP5CH/EC End caps (pair) with connectors, 30cm long each
CP5CH/TH Extra connectors (pair)
5
Part No. Diameter Included bracket Viewing distance*
Internal grade acrylic
MIR300INT 300mm Wall mount 0 - 8 metres
MIR450INT 450mm Wall mount 0-12 metres
MIR600INT 600mm Wall mount 0-20 metres
MIR800INT 800mm Wall mount 0-30 metres
Selecting the right size of mirror is important. The tables below gives a good indication to the viewing distances each mirror is suited for.
Work out your combined viewing distance and match this distance with the chart to obtain the right size mirror for your application. If in doubt, always choose the larger size mirror.
Stainless steel convex mirrors are heavy duty providing a higher resolution image than the acrylic mirrors, thus producing longer viewing distances.
Internal or external convex mirror?
Both our internal and external safety mirrors are weatherproof. However, the external convex mirrors feature stronger brackets capable of tolerating windy conditions and a visor to minimize sun glare.
Acrylic or stainless steel?
For many standard applications the general purpose, acrylic convex mirror is suitable for a number of situations. The stainless steel convex mirrors are heavy duty with longer viewing distances. They are ideal for areas of extreme weather conditions, food processing plants and mining environments. As these mirrors are virtually unbreakable, they are also suitable for areas prone to high vandalism.
Combined viewing distance* Mirror DiameterUp to 8 metres 300mm
Up to 12 metres 450mm
Up to 20 metres 600mm
Up to 30 metres 800mm
Up to 40 metres 1000mm
Combined viewing distance* Mirror DiameterUp to 25 metres 600mm
Up to 35 metres 800mm
Up to 45 metres 1000mm
Acrylic Convex Mirrors:
Stainless Steel Convex Mirrors:
If you require assistance on selecting the right convexmirror, please contact us on 09 402 6750 or
email [email protected]
These are a general purpose, light industrial convex mirror suitable for all indoor office/retail/factory and undercover applications. This robust, durable acrylic mirror is complete with galvanised colourbond steel backing and fully adjustable metal arm. Wall mounting bracket included.
• Crystal clear images• Reliable mounting brackets• Inexpensive security• Long life, impact resistant acrylic faces• Easy to install - simple instructions supplied• Easy adjustment to suit your viewing needs• No maintenance required
INTERNAL SAFETY MIRRORS - STANDARD
All internal convex mirrors are supplied with wall mount brackets as standard.
Our larger mirrors have an additional extending arm to give additional strength and flexibility.
Safety Mirrors:
An ideal solution for blind spots in offices and factories.
Protect pedestrians and vehicles alike whilst going round sharp corners.
Security Mirrors:
Theft of stock is an unwelcome threat, so give thieves another deterrent with increased surveillance.
Designed to help monitor those products that may normally be obstructed from view.
*Viewing distances are subjective and most mirrors will give satisfactory viewing range beyond
those shown. If in doubt, always choose the larger size convex mirror.
MIRROR SELECTION GUIDE:
SAFETY AND SECURITY MIRRORSwww.convexmirrors.co.nz
6
EXTERNAL SAFETY MIRRORS - HEAVY DUTY
Stainless steel mirrors are heavy duty. They provide a higher resolution image producing longer viewing distances. They are suitable for a number of applications including use in food processing plants, mining environments and areas prone to high vandalism.
The stainless steel face on this convex mirror is virtually unbreakable. Each mirror features a heavy duty steel mounting bracket suitable for 76mm posts.
• High resolution image
• Heavy duty with longer viewing distances
• Virtually unbreakable
• Features a visor to minimise sun glare.
Part No. Diameter Included bracket Viewing distanceHeavy duty stainless steelMIR600SS 600mm Post (76mm OD) 25 metres plus
Crystal clear image - Tough - DurableBlind corners are a common problem around car parks, factories and offices. Our external convex mirrors will warn oncoming traffic of your presence allowing both parties to take defensive action before an accident occurs.
An industrial quality, acrylic convex safety mirror with a highly visible, weatherproof fibre-glass backing that caters for indoor and outdoor applications. They make an ideal Traffic Mirror and blind spot mirror.
The mirror incorporates heavy duty steel mounting brackets capable of tolerating windy conditions and visors to minimize sun glare.
For more specialist applications we also provide Stainless Steel Mirror and Wide Angle Mirrors.
Part No. Diameter Included bracket Viewing distanceExternal gradeMIR450EXT 450mm Wall mount and 60mm OD post 0-12 metres
MIR600EXT 600mm Wall mount and 60mm OD post 0-20 metres
MIR800EXT 800mm Post (76mm OD) 0-30 metres
MIR1000EXT 1000mm Post (76mm OD) 0-40 metres
EXTERNAL SAFETY MIRRORS - STANDARD
WALL MOUNT ADAPTER BRACKET
A post to wall adapter bracket used for mounting the following mirrors (that are supplied with a post mounting bracket as standard) onto a concrete or brick wall:
• MIR800EXT• MIR1000EXT• MIR600SS
Part No. Included bracketAdaptersMIRBRAC01 76mm post to wall adapter bracket
• Crystal clear images• Stand up to New Zealand weather conditions• Wide range of viewing distances• Reliable mounting brackets• Inexpensive security• Long life, impact resistant acrylic faces• Easy to install• Easy adjustment to suit your viewing needs• No maintenance required
SAFETY AND SECURITY MIRRORSwww.convexmirrors.co.nz
All external convex mirrors are supplied with brackets as standard.
Depending on the mirror size they come with wall mounting brackets and/or post mounting brackets.
7
Our range of dome mirrors make ideal security mirrors and safety mirrors, protecting people against accidents in offices, warehouses and public areas.
They are also a valuable security device in retail and commercial applications and can help prevent theft in shops, malls and public areas.
Half dome and quarter dome mirrors are ideal for applications where space is confined and the use of a convex mirror would be unsuitable.
Full Dome Mirrors:
Full dome mirrors are useful for four way intersections where viewing is required from a variety of approaches.
Part No. Diameter Part No. Diameter Part No. DiameterFull Dome Mirror Half Dome Mirror Quarter Dome Mirror
MIR450FD 450mm MIR450HD 450mm MIR450QD 450mm
MIR650FD 650mm MIR650HD 650mm
Half Dome Mirrors:
Half dome mirrors provide views in two directions and are therefore ideal for T-intersections.
Quarter Dome Mirrors:
Quarter dome mirrors require less space than a standard convex mirror and are therefore useful for blind spots around corners.
DOME MIRRORSWIDE ANGLE CONVEX MIRRORS
Part No. Diameter Included bracket Viewing distance*
Acrylic Wide angle rectangularMIR9060 90cm x 60cm Post (76mm OD) and wall adapter 0-40 metres
Our acrylic wide angle mirror gives crystal clear viewing across a wide field of view. These convex mirrors are industrial quality and incorporate a heavy duty steel mounting bracket for windy conditions. These make ideal safety mirrors.
The acrylic model is 900mm wide by 600mm high. The mounting brackets are for a 76mm outside diameter post, and an adapter bracket for attaching to walls.
360° View
Ideal for 4 way intersections or retail premises
180° View
Ideal for 3 way intersections or retail premises
90° View
Ideal for corners and hallways
DOME MIRROR SELECTION GUIDE:
SAFETY AND SECURITY MIRRORSwww.convexmirrors.co.nz
8
PORTABLE SPEED HUMPS
Model No. PSH3 PS6Height 45mm 45mm
Width 300mm 300mm
Diameter (rolled up) 54cm 69cm
Length (in use) 3.05m 6.10m
Weight 13.6kg 27.2kg
At last, we can offer a truly portable and effective speed control hump. The highly visible system is designed for temporary speed control applications, where it is desired to slow traffic speeds to below 40km/h. The secret behind the success of the system is it’s unique ‘waffle-style’ rubber underlay, which maximises adhesion to the road surface as vehicles traverse.
It allows the user to simply lay the system in position (with recommended traffic control accessories such as cones and signs) and walk away. There is no fixing, no drilling, no mess and no fuss. When the job is finished, simply roll the unit up and slide it into its carry bag.
• Portable• Instant • Effective• Highly visible• Easy to use• No fixings
• Holds to road• Easily relocated• Set and forget
ECONOGUARD BARRIER
The Econoguard portable barrier is an economical alternative to its heavier duty counterparts. This free standing, expandable barrier is simple to use and ideal for internal applications eg warehouses. This highly visible, scissor-action barrier expands from 215mm in the compact position to 3 metres when fully extended. The 440mm wide feet provide a sturdy base, and the barrier weighs in at just 6.5kg to make it easily portable.
An economical sign adapter kit is available that allows your message to be secured via a wingnut to the barrier, on both sides if needed (drill required to install).
• Expands to cordon off hazards• Handy locking bar • Ideal for warehouse applications• Free standing• Portable• Versatile• Highly visible
Part No. StyleBREG3 Econoguard barrierBREG/SA Sign adapter kit
Specifications:Material SteelHeight 101cm barrier heightFinish Powdercoated red and whiteLength 215mm closed - 3 metres openWeight 6.5kg
GENERAL SAFETYwww.pwsonline.co.nz
9
Invoice to Deliver to
Please supply
Code Number Description Colour Quantity Unit Value Extended Value
Freight Charge
Total Value
Company:
Address:
Suburb:
City/Town: Post Code:
Name:
Position:
Phone: Fax:
Email:
Purchase Order No:
Signature:
Date:
q Please bill our existing account (Net 20 days)
q Electronic funds transfer (EFT) - please advise details
q Cheque (cleared funds) made payable to Premier Workplace Solutions posted to PO Box 51, Paihia 0247, Bay of Islands
q Please charge my credit card: q Visa q Mastercard
Card No.___________________________________________________________ Expiry Date:__________________________
Name on Card:__________________________________________________________________________________________
Card Holder’s Signature:___________________________________________________________________________________
Easy payment
FAX ORDER FORMFax: 09 402 6751
10
q Please deliver by PWS courier - charges applyq Please use our courier:
Account No:Purchase order number will be displayed on all delivery dockets where quoted.
Company:
Address:
Suburb:
City/Town: Post Code:
Name:
Position:
Phone: Fax:
For a full catalogue and price list contact:E. [email protected]. 09 402 6750F. 09 402 6751PO Box 51, Paihia 0247
RESELLERENQUIRIESWELCOME
CABLE MANAGEMENT
www.cablecovers.co.nz
CONVEX MIRRORS/DOME MIRRORS
www.convexmirrors.co.nz
FULL PRODUCT RANGE
www.pwsonline.co.nz
© Premier Workplace Solutions Limited. The contents of this catalogue are protected by copyright. No part of this catalogue may be reproduced without prior permission from the owner. We reserve the right to alter specifications to products without prior notice.