presentation de la sociÉtÉ - fores.it de fores algérie... · chef de project services juridique...
TRANSCRIPT
2015PRESENTATION DE LA SOCIÉTÉ
APERҪU DE L’HISTORIE
Fores Engineering Algérie Eurl est détenue complètement par Fores Engineering S.r.L., une entreprise italienne établie en 1992, qui fait partie du Groupe Rosetti Marino.
2008Création de Fores Engineering Algérie
2012Éventail des produitsgrandit: départ de l’activité de calibration et entretien des DébitMètres Fiscales
2013Augmentation ducapital sociale et nuveau siège sociale à Hassi Messaoud
2015L’entreprise est toujours en évolution: de fournisseur de services à contracteur EPC
GÉRANTM. FORLANIM. FORLANI
DIRECTEUR GÉNÉRAL
Q&HSE
R.MONTALETTI (E)
COMMERCIAL
A. MENDUNO (R)G. VENCO (E)G. VENCO (E)
DIRECTION ADMINISTRATION FINANCES ET RESOURCES HUMAINES
DIRECTEUR DES OPÉRATIONS
F. CORVINO
CHEF DE PROJECT
SERVICES JURIDIQUE
D’ENTREPRISE
A. MENDUNO
E. COLUZZI
E. H. DJENANEE. H. DJENANE
SECRETARIAT
APPROVISIONNEMENT
P. VAGO (E)
S. DADOUAT
METERING SPECIALISTF. CORVINO
COMPTABILITÉRESOURCESHUMAINES
S. SAAD (E) F. CHAOUKIF. BENDEKKENH. AOUGHLIS (E)
J.F. LODDO
F. CORVINO (P)
RESPONSABLE STRUCTURE D’INGÉNIERIE
INGÉNIEURSTECHNICIENS QUALIFIÉS
SERVICE D’INGÉNIERIE
B. TLILIA. BRDAKICA. BENLAMRIM. BABENETTE
O.H. BABAHAMOUR. MEBARKI
S. ZERROUKI
B. TLILIB. TLILI
A. BOUSSIOUDA. CHACHAA. CHACHA
M. AZZOUZ
H. KAROUTH. KAROUTB. BOUDELALB. BOUDELAL
A.H. BOUKHALFAZ. ATRIHZ. ATRIH
M. BOUCHIKHI
S. AICHI
À DÉFINIR
F. ARDITO
K. SAMOBORA. DE GEMMIS
F. GEMINIANI
ORGANIGRAMME
EXPATRIÉS24%
ALGÉRIENS76%
EXPATRIÉS
ALGÉRIENS
Diréction11%
Ingénieurs41%
Techniciens Qualifiés33%
Staff15%
Diréction
Ingénieurs
Techniciens Qualifiés
Staff
RÉSOURCES
Fores Engineering Algérie est concentrée sur un haut niveau de préparation de son personnel qui, aujourd’hui, est composé de 28 personnes.
CHIFFRES D’AFFAIRES
0
50
100
150
200
250
300
2010 2011 2012 2013 2014 2015 ÉSTIMÉ
3760
43
253
181
300
Millions de Dinars algérie
ns
CHIFFRES D’AFFAIRES ANNUELLES
Les données financières mettent en evidence les progrès de Fores Engineering Algérie.
SIÈGES DE TRAVAIL
Pour rester, toujours, à disposition de son Client et, surtout, pour répondre le plus rapidement possible à ses exigences.
Bureau Opérationnel
Hassi Messaoud
Bureau Opérationnel
Hassi Messaoud
Siège socialAlgièrs
Siège socialAlgièrs
Bureau Commercial
Oran
Bureau Commercial
Oran
SYSTÈME Q&HSEFores Engineering Algérie travaille en suivant les mêmes standard, à l’égard du Système deGestion de la Qualité, la Santé, la Sécurité et l’Environment adopté par sa maison mèreFores Engineering Italie.
SECTEUR D’ACTIVITÉ
Fores Engineering Algérie Eurl offre ses Services pour les produits suivants.
INSTRUMENTATION ÉLÉCTRIQUE ET DU CHAMP
SYSTÈMES DE TÉLÉCOMMUNICATION ET D’AUTOMATION
PANNEAUX DE CONTRÔLE DES TÊTES DES PUITS
SYSTÈMES DE INJECTION DES PRODUITS CHIMIQUES ET D’EAU
SYSTÈMES DE COMPTAGE FISCALE ET D’ANALYSE
SYSTÈMES DE ALLUMAGE DE LA TORCHE
ACTIVITÉS
SERVICES TECHNIQUES
• Ingégnerie du champ• Installation • Commissioning et Démarrage
• Formation duPersonnel
• Calibration desCompteurs Fiscales
• Injection d’Eau et desProduits Chimique
• Allumage de la Torche
ENTRETIEN
• Entretien Correctif• Entretien Préventif• Modifications et Améliorations
PIÈCES DE RECHANGE
• Specification pour lesPièces de Rechange
• Identification desPiècesInterchangeables
• Fourniture de Piècesde Rechange
• Gestion Logistique• Gestion des Pièces de Rechange
Le travail de Fores Engineering Algérie Eurl est focalisé sur les Services Techniques,l’Entretien et les Pièces de Rechange.
SYSTÈME DE COMPTAGE FISCALE D’ANALYSE
Fores Engineering Algérie Eurl peut exécuter les services suivants, adressés aux systèmesde comptage fiscale:
Vérification du système et de la performance
Maintenance préventive et corrective du système
Vérification et étalonnage des instruments
Étalonnage du tube étalon
Assistance et maintenance de l'ordinateur d'écoulement
Formation
ACTIVITÉS
Le personnel de FEA peut exécuter des audits de systèmes et la vérification desperformances de la chaîne complète de la mesure (de mètre, des dispositifssecondaires, calculateurs, etc.) conformément à des normes métrologiques principales(ISO, API, CEI, OIML, etc.):
• Vérification des dispositifs primaire et secondaire• Vérification de la fonction de calcule des ordinateurs des débit• Étalonnage des provers
L’entreprise a développé un logiciel générale (CALIBRATION EXPERT) pour effectuer tout type de vérification métrologique pour le système de comptage.
ACTIVITÉSSYSTÈME DE COMPTAGE FISCALE D’ANALYSE
Une attention particulière est utilisée pour les étalons d'étalonnage et de vérification, en suivant les procédures définies dans l'API MPMS 4.9, par exemple:
Méthode d'étalonnage avec le compteur maître (master meter)
ACTIVITÉSSYSTÈME DE COMPTAGE FISCALE D’ANALYSE
Une attention particulière est utilisée pour les étalons d'étalonnage et de vérification, en suivant les procédures définies dans l'API MPMS 4.9, par exemple:
Méthode d'étalonnage avec le tirage de l’eau (water draw test)
Une attention particulière est utilisée pour les étalons d'étalonnage et de vérification, en suivant les procédures définies dans l'API MPMS 4.9, par exemple:
Méthode d'étalonnage avec le tirage de l’eau (water draw test)
SYSTÈME DE COMPTAGE FISCALE D’ANALYSE
ACTIVITÉS
MAJEURS OPÉRATEURS
Fores Engineering Algérie Eurl, dépuis sa naissance, pourvoit certains parmi les majeursOpérateurs, de services et de maintenance des équipements, du Pays.
RÉFÉRENCES TECHNIQUES
RÉFÉRENCES TECHNIQUES
MISE A NOUVEAU DU SYSTÈME OTN
Client Final: SonatrachProjet: Axe Hassi R’Mel – Skikda (GK1 – GK2)Année: 2014
RÉFÉRENCES TECHNIQUES
COMMISSIONING du WHCP et CONFIGURATION du PLC
Client Final: SonatrachProjet: Gassi Touil ChampMaître de l’Ouvrage: JGC AlgérieAnnée: 2013
RÉFÉRENCES TECHNIQUES
ENTRETIEN du DÉBIT MÈTRE FISCAL et CONTRACT de CALIBRATION
Client Final: Groupement BerkineProjet: Champs de Berkine et El MerkMaître de l’Ouvrage: Groupement BerkineAnnée: 2012 ‐ 2014
RÉFÉRENCES TECHNIQUES
CALIBRATION et ENTRETIEN du DÉBIT MÈTRE FISCALE à GAS et HUILE
Client Final: First Calgary Petroleum – SonatrachProjet: Champ de MenzelMaître de l’Ouvrage: First Calgary Petroleum – SonatrachAnnée: 2014 ‐ 2016
RÉFÉRENCES TECHNIQUES
SERVICE DE ALLUMAGE DE TORCHE
Client Final: First Calgary Petroleum – SonatrachProjet: Champ de MenzelMaître de l’Ouvrage: SaipemAnnée: 2012 ‐ 2014
RÉFÉRENCES TECHNIQUES
SERVICES D’INJECTION DU MÉTHANOL
Client Final: First Calgary Petroleum – SonatrachProjet: Champ de MenzelMaître de l’Ouvrage: SaipemAnnée: 2012 ‐ 2014
RÉFÉRENCES TECHNIQUES
ASSISTANCE TÉCNIQUE et CONTRACT D’ENTRETIEN
Client Final: Groupement Sonatrach ‐ AgipProjet: Champs de ROD et BRNMaître de l’Ouvrage: Groupement Sonatrach ‐ AgipAnnée: 2007 ‐ 2011
RÉFÉRENCES TECHNIQUES
WHCP et PANNEAUX SOLAIRES avec BATTERIES
Client Final: Groupement Sonatrach ‐ AgipProjet: Champs de ROM et RODMaître de l’Ouvrage: Groupement Sonatrach ‐ AgipAnnée: 2013
RÉFÉRENCES TECHNIQUES
PACKAGE D’INJECTION CHIMIQUE
Client Final: Groupement Bir SebaProjet: Champ de Bir SebaMaître de l’Ouvrage: JGC Corporation Année: 2012
RÉFÉRENCES TECHNIQUES
No. 2 CONTROL CABINS
Client Final: M.W. Kellogg – BP / SonatrachProjet: Champ de In AmenasMaître de l’Ouvrage: Nuovo Pignone Année: 2004
RÉFÉRENCES TECHNIQUES
PACKAGE D’INJECTION CHIMIQUE
Client Final: Groupement BerkinePlant: Champ de El MerkMaître de l’Ouvrage: ABB Process Solution & ServiceAnnée: 2009
RÉFÉRENCES TECHNIQUES
PACKAGE D’INJECTION CHIMIQUE
Client Final: Groupement Sonatrach ‐ AgipMaître de l’Ouvrage: Groupement Sonatrach ‐ AgipProjet: Champs de BRN et ROD Année: 2007 ‐ 2009
CONTACTS
Michele ForlaniGérantTél.: +213 (0) 29 731179Fax: +213 (0) 29 731179E-mail: [email protected]
Alessandro MendunoDirecteur GénéralTél.: +213 (0) 29 731179Fax: +213 (0) 29 731179E-mail: [email protected]
2015PRÉSENTATION DE LA SOCIÉTÉ
HISTOIREFores Engineering est une société italienne spécialisée dans l’activité de conception,intégration, construction et maintenance de Systèmes pour les secteurs Pétrole & Gaz,Pétrochimique, Chimique et pour les Centrales Energétiques.
ÉTAPES PRINCIPALES DE L’ENTREPRISE
2015
La société a atteint 23 années d'expérience dans la réalisation de services d'ingénierie ainsi que de produits de haute qualité.
1992
Fores Engineering nait à Forlì, au Nord‐Est de l'Italie, comme Société d’Ingénierie électrique et instrumentale.
2009
La société commence à opérer directement à l’étranger ouvrant des filiales en Afrique et au Moyen‐Orient.
Fores Engineering Algérie Eurl
Fores Engineering Algérie Eurl
Fores Engineering Algérie Eurl
100%
Fores do BrasilLtda
Fores EngineeringAbu Dhabi BranchFores EngineeringAbu Dhabi BranchFores EngineeringAbu Dhabi Branch
75%25%
10%
Rosetti Marino UK Ltd
(United Kingdom)
Rosetti Marino UK Ltd
(United Kingdom)
Rosetti Marino UK Ltd
(United Kingdom)
100%
100%
100%
Rosetti LibyanBranch
Tecon S.r.L.(Italy)
10%
Rosetti D.O.O. (Croatia)
100%
RosettiKazakhstan
L.L.P.90%
Rosetti Marino Mocambique
Ltda
Rosetti Poland Branch
KCOI L.L.P.(Kazakhstan)KCOI L.L.P.
(Kazakhstan)KCOI L.L.P.
(Kazakhstan)40%
100%
Vue d'ensemble de la structureROSETTI MARINO: LE GROUPE
98%
Fores EngineeringSingapore BranchFores EngineeringSingapore BranchFores EngineeringSingapore Branch
Rosetti General Contracting LDA
(Portugal)2%
Alfaros S.r.L.(Italy)
Rosetti Pivot LTD
(Nigeria)
Rosetti Libya JSC
(Libya)
Unaros FZC LTD (U.A.E.)
10%
50%
65%
49%
20%
100%
ORGANIGRAMMEPERSONNEL CLÉ
RESSOURCES HUMAINES
INGÉNIEURS91TECHNICIENS
QUALIFIÉS65
STAFF 25
PERMANENT156
TEMPORAIRE25
L’ENTREPRISE: SES STRUCTURES
Bureaux2.500m2
Espaces de travail en plein air 20.500m2
Un nouveau bâtiment, de 1.323 m²,est en cours de construction.
La dimension totale des bureaux seraaccrue de 66%.
Ateliers et Entrepôt 1.400m2
TRAVEAUX EN COURS
SYSTÈME DE GESTION QHSELe Système de Gestion de Qualité, Hygiène, Sécurité et Environnement assure la fortevolonté de Fores Engineering de satisfaire les attentes du Client par des standards dehaute qualité, sans oublier la sauvegarde de l’environnement et les ressourcesénergétiques.
ACCREDITATIONS
ISO 9001:2008
ISO 14001:2004
OHSAS 18001:2007
FPAL Qualified
JQS Qualified
FORES ENGINEERING ALGERIEHassi Messaoud
FORES ENGINEERINGSINGAPORE BRANCHESingapore
FORES DO BRASILRio de Janeiro
ROSETTI KAZAKHSTANAktau
FORES ENGINEERINGForlì
PARTICIPÉESMARCHÉS
PRÉSENCE DANS LE MONDE
FILIALES
FORES ENGINEERINGABU DHABI BRANCHEAbu Dhabi
ASPECTS FINANCIERSLa situation financière met en évidence le développement et la solidité de ForesEngineering.
0
10
20
30
40
50
60
70
80
2010 2011 2012 2013 2014 2015ÉSTIMÉ
32
26
34
43
57
70
Millions d’Euros
CONSOLIDÉ ANNUEL
CHIFFRES D’AFFAIRES EN ALGÉRIE
0
200
400
600
800
1000
1200
2010 2011 2012 2013 2014 2015ÉSTIMÉ
489
129
402
169
366
800
37
60
43253
181
300
Millions de Dinars Algériens
CHIFFRES D’AFFAIRES
Serie2 Serie1
526
189
445 422
547
1100
Fores Engineering accompagne ses Clients pendant tous les stades du projet, de l‘ingénierie à la mise en service, jusqu'à l’après‐vente, afin de garantir un haut niveau de satisfaction des Clients.
La structure opérationnelle est divisée en trois unités:
STRUCTURE OPERATIONELLE
UNITÉ AUTOMATION & SYSTÈMES DE TÉLÉCOMMUNICATION
EXPERTISE
EXPERTISE DE L’UNITÉ AUTOMATION & TELECOML’unité est spécialisée dans la conception, la construction et l’intégration de systèmesd’automation entièrement testés et opérationnels.
• Systèmes de Contrôle et de Sécurité Intégrés
• Systèmes de Contrôle du Procédé
• Systèmes de Contrôle Électrique
• Systèmes d’Arrêt d’Urgence
• Systèmes de Détection d’Incendie et de Gaz
• Systèmes de Lutte contre l’Incendie
SYSTÈMES DE CONTRÔLE DU PROCÉDÉSYSTÈMES DE CONTRÔLE DU PROCÉDÉ
SYSTÈMES DE SÉCURITÉSYSTÈMES DE SÉCURITÉ
EXPERTISE DE L’UNITÉ AUTOMATION & TELECOM
• Systèmes d’Acquisition des Données
• Systèmes de Télémétrie
• Interface Homme‐Machine
• Alarme générale et sonorisation (PA/GA)
• Téléphonie (PABX) • Anti‐intrusion• Systèmes Radio
• Systèmes satellitaires• Télésurveillance (CCTV)• Géolocalisation (GPS)• Contrôle d’accès
SYSTÈMES DE SÉCURITÉ & TÉLÉCOMMUNICATIONSYSTÈMES DE SÉCURITÉ & TÉLÉCOMMUNICATION
L’haut niveau des compétences techniques de l’unité Automation & Telecom est reconnu et estimé par la plupart des Fabricants des Hardware et se fonde sur un suivi journalierdes fournitures.
SCADA & HMISCADA & HMI
UNITÉ AUTOMATION & SYSTÈMES DE TÉLÉCOMMUNICATION RÉFÉRENCES PRINCIPALES
TELECOMMUNICATION SYSTEM
END USER Eni Congo
PLANT Litchendjili Gas Plant
CONTRACTOR Saipem
COUNTRY Congo
DESCRIPTIONEngineering, procurement, construction and site assistance of a Telecom System for Litchendjili Onshore Gas Treatment Plant, including: • VoIP telephone system, • local radio system, • PAGA system, • Local Area Network system (LAN), • telecom tower.
WORK IN PROGRESSWORK IN PROGRESS
SYSTÈMES DE TÉLÉCOMMUNICATION
WORKS LOCATION Forlì ‐ Italy
FIELD Onshore
DATE AWARD February 2014
COMPLETION August 2014
TELECOMMUNICATION SYSTEM
END USER Dunkerque LNG
PLANT Terminal Methanier de Dunkerque
CONTRACTOR Techint
COUNTRY France
DESCRIPTIONEngineering, procurement, construction, installation, pre‐commissioning, commissioning and start‐up activities for aTelecommunication System composed of:
Plant and buildings Local Area Network (Cisco); Indoor VoIP Telephone System (Cisco); VoIP Teleph. System for Hazardous Areas (Gai‐Tronics);Hot Line Telephone System (Gai‐Tronics);UHF TETRA System (Motorola); Radio Coverage Design; VHF Marine Radio System (Sailor);GSM Mobile System (Nokia); Public Address and General Alarm (PA/GA) ‐ (Bosch); Sound Coverage Design (by SOUND PLAN sw); Emergency Plan System Sirens (POI and PPI) – (E2S); Telecommunication Towers.
WORK IN PROGRESSWORK IN PROGRESS
SYSTÈMES DE TÉLÉCOMMUNICATION
WORKS LOCATION Forlì ‐ Italy
FIELD Onshore
DATE AWARD July 2013
COMPLETION August 2014
TELECOMMUNICATION SYSTEM
END USER Saudi Aramco
PLANT Wasit Gas Program
CONTRACTOR SAIPEM
COUNTRY Saudi Arabia
DESCRIPTIONEngineering, procurement and construction of an integrated Telecom System for voice, video and data for Wasit Plant which includes Hasbah Ptf, Arabiyah Ptf, IIP Ptf and n.13 Wellhead Ptfs. Basically the Telecom System includes: • V‐Sat System (Advantec);• Air and Marine Radio Systems (Park‐Air/Motorola);• Non‐Directional Beacon (NDB) – (SAC);• Digital Radio System (TETRA) – (Cassidian); • Process & Security Network System (Moxa/Cisco); • Process & Security CCTV System. Nr.150 ATEX Camera
Sets and relevant VMS and NVR (Videotec/Stahl);• Telecom Alarm System (GE RTU based); • AWOS (Automated Weather Observing System);• VoIP Telephone System (Vaisala);• Nr.3 Telecom Shelters; • DC‐DC converter and power distribution.
SYSTÈMES DE TÉLÉCOMMUNICATION
DELIVEREDDELIVERED
WORKS LOCATION Forlì ‐ Italy
FIELD Offshore
DATE AWARD December 2012
COMPLETION February 2014
INTEGRATED CONTROL SAFETY SYSTEMS(ICSS)
END USER Saipem
PLANT Aquila FPSO
CONTRACTOR SES (Saipem Energy Services)
COUNTRY Italy
DESCRIPTION
Engineering, procurement, hardware and software design,construction, testing, commissioning and start‐up activitiesfor the supply of a FPSO’s Safety System composed of:
• Integrated F&G/ESD (Topside Area), based on Siemens PCS7 Safety in compliance with IEC61508/511 standards, rated at SIL2 for F&G section and at SIL3 for ESD section;
• F&G (Vessel Area), based on Siemens PCS7 Safety and an Autronica IFG Addressable System SIL2 rated, in compliance with IEC61508/511 standards;
• F&G equipment both addressable and conventional.
SYSTÈMES DE CONTRÔLE DES PROCESSUS
COMPLETEDCOMPLETED
WORKS LOCATION Forlì ‐ Italy
FIELD Floating Production Storage and Offloading (FPSO)
DATE AWARD June 2008
COMPLETION January 2013
FIRE ALARM SYSTEM (FAS)
END USER Qafco
PLANT Ammonia and Urea PlantQafco V & VI Project
CONTRACTOR Saipem
COUNTRY Qatar
DESCRIPTION
Engineering, procurement, hardware and software design, construction, commissioning and start‐up activities of a Fire Alarm System composed of: • Nr.25 Fire Alarm Control Panels based on Autronica IFG
addressable units compliant with NFPA72 rules and SIL2 stds;
• Supply of High Sensitive Smoke Detectors, Push Buttons and Optical/Acoustic Devices;
• Supply of all hook‐up materials (cables, cable trays and accessories);
• Integration with the existing fire alarm system at QAFCO‐5 Site.
SYSTÈMES DE CONTRÔLE DES PROCESSUS
COMPLETEDCOMPLETED
WORKS LOCATION Forlì ‐ Italy
FIELD Onshore
DATE AWARD March 2009
COMPLETION June 2011
INTEGRATED CONTROL SAFETY AND SCADA SYSTEMS (ICSS)
END USER EdInaJoint Venture Edison & Ina
PLANT Izabela North & IzabelaSouth
CONTRACTOR Rosetti d.o.o.
COUNTRY Croatia
DESCRIPTIONEngineering, procurement, hardware and software design, construction, commissioning and start‐up activities of an Integrated Control and Safety System composed of:• ICSS system cabinet 3.200x800x2.100 mm;• PCS system based on Rockwell ControlLogix (400 I/Os for
Izabela North; 450 I/Os for Izabela South);• ESD/F&G system based on ICS‐Triplex Trusted (400 I/Os)
for Izabela North; 450 I/Os for Izabela South) in TMR configuration with triple redundancy at all levels in compliance with IEC 61508 SIL3 rules;
• SCADA system with nr. 3 OWS, nr. 1 EWS, nr. 1 Redundant TAG server and Nr. 1 Historian server (only for IzabelaNorth);
• Digital radio and Satellite Backup links.
SYSTÈMES DE CONTRÔLE DES PROCESSUS
WORKS LOCATION Forlì ‐ Italy
FIELD Offshore
DATE AWARD November 2008
COMPLETION December 2010
COMPLETEDCOMPLETED
F&G / ESD – BMS – CCTV ‐ SCADA
END USER Eni
PLANT Rubicone Gas Treatment Plant
CONTRACTOR Eni
COUNTRY Italy
DESCRIPTIONEngineering, procurement, hardware and software design, construction, commissioning and start‐up activities of an Integrated Control and Safety System composed of:• HMI system based on Schneider PlantStruxure• PCS system based on Schneider PlantStruxure• ESD/F&G system based on Schneider Quantum SIL3• BMS system based on Schneider Quantum SIL3• Telemetry Remote SCADA Plant • Security CCTV• Access Control System (ACS) • Intruder Detection System (IDS)• Wireless Process Instrumentation • F&G field devices.
SYSTÈMES ICSS, ANTI‐INTRUSION & CCTV
COMPLETEDCOMPLETED
WORKS LOCATION Forlì ‐ Italy
FIELD Onshore
DATE AWARD November 2011
COMPLETION December 2012
UNITÉ SKID & PACKAGESEXPERTISE
Grâce à la solide expérience et aux compétences techniques élevées de son personnel,l’unité Skid & Packages est entièrement capable de fournir des systèmes clé en main pourles secteurs Pétrol & Gaz, Pétrochimique, Chimique et pour les Centrales Energétiques.
• Panneaux de commande des têtes de puit de surface
• Groupes pneumo‐hydrauliques (HPU)
• Panneaux de commande des têtes de puit de surface
et Groupes hydrauliques pour Applications sous‐
marines
• Panneaux Locaux
SYSTÈMES HYDRAULIQUES/PNEUMATIQUES SYSTÈMES HYDRAULIQUES/PNEUMATIQUES
EXPERTISE DE L’UNITÉ SKID & PACKAGES
• Système d’étalonnage
• Systèmes d’analyse pour gaz naturel
• Stations de détente (réduction de pression)
SYSTÈMES DE COMPTAGESYSTÈMES DE COMPTAGE
• Cabines de contrôle et Cabines techniques• Sous‐stations / Postes électriques• Refuge temporaires• Groupes Electrogènes à Gaz & Diesel• Groupes Electrogènes à Microturbines
ABRISABRIS
Nos systèmes sont conformes aux directives UE en vigueur et aussi aux lois locales.
EXPERTISE DE L’UNITÉ SKID & PACKAGES
• Systèmes d’Injection de Produits Chimiques
• Production d’Air Instrument et Unités de
Séchage de l’Air
• Systèmes Gaz Carburant & Diesel
• Génération d’Hydrogène
PACKAGES DE SERVICESPACKAGES DE SERVICES
EXPERTISE DE L’UNITÉ SKID & PACKAGES
• Système de Conditionnement de Gaz
• Lignes de Transport d’Echantillon
• Circuits à Boucle Rapide
• Systèmes de Gestion Analyseurs & Acquisition de
Données
ANALYSEURS DU PROCÉDÉANALYSEURS DU PROCÉDÉ
Études de faisabilité, ingénierie de base et détaillée, approvisionnement, activités deconstruction et de mise en service, peuvent être effectués pour tous nos produits.
UNITÉ SKID & PACKAGESRÉFÉRENCES PRINCIPALES
LABORATORY PACKAGES
END USER Petrobas
PLANT FPSO P‐75 & P‐77
CONTRACTOR QGI OIL & GAS INC.
COUNTRY Brazil
DESCRIPTIONEngineering, procurement, construction, certification andtest of no.2 Laboratory Modules for FPSOs P‐75 & P‐77operating in pre‐salt Santos Basin Field at Cessao OnerosaArea Development in Brazil.
The supply includes no.1 painted carbon steel shelter foreach FPSO, full insulated, equipped with redundant HVACsystems, detectors, furnitures and instruments for oil & gasanalysis.
WORK IN PROGRESSWORK IN PROGRESS
CABINES D’ANALYSE
WORKS LOCATION Forlì ‐ Italy
FIELD Floating Production Storage and Offloading (FPSO)
DATE AWARD April 2014
COMPLETION February/June 2015
CHEMICAL INJECTION EQUIPMENT
END USER Tullow Ghana
PLANT FPSO Tullow T.E.N.
CONTRACTOR Modec Offshore Production Systems
COUNTRY Ghana
DESCRIPTIONEngineering, procurement and construction of a completechemical and methanol injection system for FPSO TULLOWT.E.N. offshore Ghana.As main items, the scope of supply includes no. 6 skidmounted units including structures, no.47 API 675 pumps,no.1 Methanol Transfer air‐driven pump, and no. 23 storagetanks. All wetted parts are in AISI 316L or AISI 317L stainlesssteel material.The supply includes also instrumentation as IRCD, flowtransmitters, safety valves and various Chemical InjectionPackage ‐ FPSO T.T.E.N. accessories.Construction activities of the system will be made inSingapore.
SYSTÈMES À INJECTION DE PRODUITS CHIMIQUES
WORK IN PROGRESSWORK IN PROGRESS
WORKS LOCATION Singapore ‐ Singapore
FIELD Floating Production Storage and Offloading (FPSO)
DATE AWARD March 2014
COMPLETION January 2015
TOPSIDE UMBILICAL TERMINATION UNITS
END USER Total Angola
PLANT FPSO GirRI
CONTRACTOR Saipem Comercio Maritimo
COUNTRY Angola
DESCRIPTIONEngineering, procurement, construction and testing of no. 2Topsides Umbilical Termination Units (TUTU) for GirassolFPSO.TUTUs shall serve as umbilical interfaces between surfaceand subsea systems for the following fluids: MEOH,Demulsifier,Control Fluid, Barrier Fluid. Service lines are made in AISI904L piping with hub connectors or Super Duplex HP conedandthreaded tubing.No. 2 Topside Umbilical Termination Units ‐ GirRI FPSO Eachsystem is installed inside a stainless steel cabinet J120 classfireproofed by intumescent coating.
ARCHIVE FOOTAGE
SYSTÈMES À INJECTION DE PRODUITS CHIMIQUES
WORK IN PROGRESSWORK IN PROGRESS
WORKS LOCATION Forlì ‐ Italy
FIELD Floating Production Storage and Offloading (FPSO)
DATE AWARD April 2014
COMPLETION December 2014
FISCAL METERING FOR NATURAL GAS
END USER Eni
PLANT Various onshore plants and offshore platforms
CONTRACTOR Eni
COUNTRY Italy
DESCRIPTIONFramework Agreement for engineering, procurement,construction, commissioning and site assistance activities ofvarious Fiscal Metering Systems for natural gas applications.
The supply includes primary flow element, special upstream& downstream piping spools, transmitters, flow computers,gaschromatographs and various accessories.
WORK IN PROGRESSWORK IN PROGRESS
SYSTÈMES DE COMPTAGE FISCAL
WORKS LOCATION Forlì ‐ Italy
FIELD Onshore
DATE AWARD April 2012
COMPLETION December 2014
WHCP & HPU
END USER Maersk Olie Og Gas
PLANT Tyra South East B Platform
CONTRACTOR Maersk Olie Og Gas
COUNTRY Denmark
DESCRIPTIONEngineering, procurement, construction, commissioning and site assistance activities of Nr. 1 Wellhead Control System. In detail, the package is composed by:• Nr. 1 Hydraulic Power Unit including Nr.1 oil tank,
Nr.2x100% electric pumps for HP circuit, Nr.2x100% electric pumps for MP circuit, Nr.1 recirculation pump, hydraulic accumulators set;
• Nr. 1 Wellhead Control Unit, composed by solenoid valves and accessories installed inside an AISI 316 enclosure to manage up to Nr.16 wells;
• Nr. 2 Well Override Panels; Nr. 1 Valve Control Panels to manage Nr. 38 Valves; Nr. 1 HP Accumulator Panel and Nr. 1 LP Accumulator Panel.
PANNEAU DE COMMANDE DES TÊTES DE PUITS DE SURFACE
DELIVEREDDELIVERED
WORKS LOCATION Forlì ‐ Italy
FIELD Offshore
DATE AWARD September 2012
COMPLETION March 2013
UNITÉ INDUSTRIAL SERVICEEXPERTISE
EXPERTISE DE L’UNITÉ INDUSTRIAL SERVICEL’expertise de l’unité consiste d’une équipe d’ingénieurs et techniciens avec descompétences consolidés dans l’entretien technique, aussi bien sur terre (onshore) que enmer (offshore). Cette équipe réalise des activités opérationnelles et d’entretienspécialisées pour les instruments et les systèmes conçus et fournis par d’autres sociétés,en offrant un éventail complet de services intégrés.
• Etudes de Faisabilité• Ingénierie électro‐instrumental de champ• Installation et Supervision électro‐instrumental • Mise en Service & Démarrage• Cours de Formation Technique
ENTRETIEN TECHNIQUEENTRETIEN TECHNIQUE
• Prévention
• Correction
• Amélioration
• Remise à neuf
OPERATION & ENTRETIENOPERATION & ENTRETIEN
EXPERTISE INDUSTRIAL SERVICE
• Spécifications pour les Pièces de Rechange
• Identification Interchangeable
• Approvisionnement des Pièces de Rechange
• Gestion Logistique
GESTION PIÈCES DE RECHANGEGESTION PIÈCES DE RECHANGE
Notre équipe qualifiée effectue des modifications des systèmes sans provoquer, sipossible, aucune interférence ou interruption dans la production.
You may call it work.
We call it Passion.
MERCIDE VOTRE ATTENTION
FORES ENGINEERING ‐ VIA SECONDO CASADEI, 12 – 47122 FORLI (ITALIE)TÉL. +39 0543 789811 – EMAIL: [email protected]