présentation de nmp dans horizon 2020
TRANSCRIPT
1
Thématique NMPNanotechnologies, Matériaux avancés,
Systèmes de production
Work Programme (WP) NMPdocument de base des futurs appels
1.1
Programme de travail : sur 2 ans (négociation)- forte évolution par rapport à FP7 : accent sur la
recherche appliquée, plus proche du marché (TRL 4+) - des appels annuels
Thèmes proposés : moins prescriptifs, un fort accent est mis sur l’impact
Une présentation des thèmes harmonisée:- défi spécifique à relever, justification- périmètre de l’activité à adresser- impact attendu, en lien avec le défi
- niveau TRL attendu, - projet de Recherche (100%) ou d’Innovation (70%)
1
KET système de production
TRL 1 TRL 2 TRL 3 TRL 4 TRL 5 TRL 6 TRL 7 TRL 8 TRL 9
Principes de base
observés
Concepts de la
technologie
formulés
Preuve
expérimentale du
concept
Validation en
laboratoire de la
technologie
Validation en
environnement
significatif de la
technologie
Démonstration en
environnement
significatif
Démonstration en
environnement réel
Qualification du
système réel
complet
Système réel
prouvé via missions
réussies
KET nanotech/matériauFET Pro-Active
Défis sociétaux
EIT/KICRaw MaterialsAdv. Manufacturing
Fonds Structurels
Propositions attendues1.2
1Propositions attendues
Raw materials extraction and processing
Production Use End of Life
Traditional design
Eco-design
‘Eco-design: the systematic integration of environmental considerations into product and process design’
(NRC Canada, 2003)
1.3
1Impact attendu1.4
Quelques mots clés- Croissance économique, compétitivité
- Emploi, création de start-up
- Bénéfice pour l’environnement, réduction de l’utilisation des ressources
- Renforcement des coopérations:� au sein de la chaine de la valeur,� entre les Etats membres, les Régions
- Contribution aux défis sociétaux
Mais aussi- Exploitation, utilisation des résultats: capacités, objectifs, stratégie, optimisation d’équipements existants…
1Propositions et Evaluations2
Publication appel prévue le 11/12/2013sous réserve des vote du PE et du CE, attendus début novembre
Evaluations:� 2 étapes pour NM hors lignes pilotes� 1 étape pour les PPP et CSA et lignes pilotes
- Propositions attendues:� PPP, CSA: 04/2014� NM: 04/2014 (étape 1) -> 06/2014 (étape 2)
- Des critères uniformes (excellence; impact; mise en œuvre)
- « Time to Grant » : réduit à max 8 mois (5 m. évaluation + 3 m. négociation)
Contrepartie: tout projet identifié comme pouvant nécessiter + de 3 mois de négo sera rétrogradé
1Préparer une proposition
1. Obtenir (et lire en détails) le programme de trav ail de l’APhttp://ec.europa.eu/xxxx
� Identifier le (ou les) topic qui vous intéresse� Evaluer l’opportunité d’une proposition: intérêt pour l’organisme, bénéfice attendu, objectif scientifique et technique, moyens à mobiliser� Contacter si besoin le « project officer » en charge du sujet, pour s’assurer que votre projet est bien dans le « scope ». Le PCN peut également vous aider.
2. Identifier et rechercher les partenaires potentie ls (ci-après)Il faut tout d’abord vous positionner comme:
� coordinateur (expérience requise) et rechercher des partenaires� partenaire et chercher à intégrer un consortium
3. Commencer à préparer la proposition et définir l e budget� rigueur: what, why, when, who, how, vérifier la pertinence� clarté: des objectifs, moyens, résultats attendus� factuel: infos vérifiables, mesurables, éviter le déclaratif� pertinence: entre objectifs / partenariat / moyens demandés
2.1
1Rechercher des partenaires
Utilisez avant tout VOTRE réseau
• Utilisez les réseaux de spécialistes des projets eur opéens� Le réseau des PCN NMP européens http://www.nmpteam.com� Les réseaux régionaux : EEN, CCI, Régions et via le PCN PME
http://een.ec.europa.eu/index_fr.htm
Le service Cordis: http://cordis.europa.eu/partners-service/home_fr.html
• Participez aux évènements de recherche de partenaire s� Organisés par les PCN (brokerage à Strasbourg le 29/11+ en Régions)
Inscription: http://www.b2match.eu/kets2014/� Dans le cadre des conférences spécialisées (Manufuture, 7-8/10)� De la Commission (infoday PPP 17/12 à Bruxelles)
2.2
1WP NMP 2014-20153
1. Overcome the death valley
→ Bridging the gap between nanotechnology research and markets
→ Exploi%ng the cross-sector poten%al of Nanotechnologies and Advanced materials to
drive competitiveness and sustainability
2. NM addressing societal challenges
→ Nanotechnology and Advanced Materials for more effec%ve Healthcare
→ Nanotechnology and Advanced Materials for low carbon energy technologies and Energy
Efficiency
3. Overraching aspects of NMP
→ Safety of nanotechnology-based applica%ons and support for the development of
→ Addressing generic needs in support of governance, standards, models and structuring in
nanotechnology, advanced materials and production
4. Advanced manufacturing and processing: 3 PPP
→ FoF - Factories of the Future
→ EeB – Energy-efficient Buildings
→ SPIRE – Sustainable Process Industries
5. Biotechnologies et divers
1
This challenge addresses three of the key European nano-enabled industrial value chains:
•lightweight multifunctional materials and sustainable composites;
•structured surfaces;
• functional fluids.
Call for Nanotechnologies, Advanced Materials and ProductionBridging the gap between nanotechnology research and markets
3.1
1Appel 2014: Overcome the death valley
Bridging the gap between nanotechnology research and markets
1Open access pi lot l ines for cost effective
nanocompos i tes4-5 to 6 R&I
Ligne pi lote de production de nanocompos i tes bas coût,
automatisation, métrologie, s tandardisation
4High defini tion printing of
multi functiona l materia ls4-5 to 6 I
Procédé d’impres s ion de fort volume, à haute définition,
productivi té, ga in res sources
5Indus tria l -sca le production of
nanomateria ls for printing appl ications4-5 to 6 I
Synthès e, fonctionnal i sation de nanomatériaux pour impress ion
par procédé « l iquide ». Nouveaux marchés , normal i sation
18Materia l s solutions for use in the
creative industry sector5-7 I
Solutions matériaux à parti r de déchets ou sous-produi ts ou par
biomimétisme (fa ible impact envi ronnementa l ). Toute la cha ine
de la va leur
20 Widening materia l s models 5 R&IExtens ion de modèles « mesosca le » pour la conception de
nouveaux matériaux, va l idation expérimenta le.
21
Materia l s -based solutions for the
protection or preservation of European
cul tura l heri tage
5-7 I1 ou plus ieurs matériaux fonctionnal i sés appl iqués à la
restauration et la conservation d’œuvres d’art.
26
Accelerating the industria l uptake of
nanotechnologies , advanced materia l s
or advanced manufacturing and
process ing technologies by SME
Accélérer le trans fert de technologie des NM, en 3 phas es :
fa i sabi l i té (50k€), activi tés d’innovation, plan de développement
et de commercia l i sation
Exploiting the cross-sector potential of Nanotechnologies and Advanced materials to drive competitiveness and
sustainability
SME
instrument
1
NMP 4 - 2014: High definition printing of multifunct ional materials
* developing and demonstrating in relevant industrial environments high throughput printing technologies (possibly in combination with other deposition technologies) with higher definitions (down to nanoscale) utilising a wider spectrum of multifunctional materials. Pilot line setting should be used to verify production speed and reliability, as well as sufficient yield, quality and functionality of the intended application.
* start at TRL 4-5, target TRL 6.
* Innovation Actions (70% funding)
Call for Nanotechnologies, Advanced Materials and ProductionBridging the gap between nanotechnology research and markets
1
NMP 5 - 2014: Industrial-scale production of nanomat erials for printing applications
* developing and demonstrating in relevant industrial environments the synthesis and functionalisation of nano-materials for printing applications with high process throughput. The developed nanomaterials (inks) formulations should demonstrate functionality, process compatibility, non-toxicity, environmental friendliness (e.g. aqueous media) and low-cost.
• start at TRL 4-5, target TRL 6.
• Innovation Actions (70% funding)
Call for Nanotechnologies, Advanced Materials and ProductionBridging the gap between nanotechnology research and markets
1
This challenge taps into the potential of nanotechnologies and advanced materials to enable more effective therapies and diagnostics for important diseases.
�production technologies of the nanomedicines and nanomaterials have to be scaled-up to the pilot-scale, to provide production quantities that are sufficient for clinical testing.
�develop the technologies and therapies to the point where they can be considered fit for purpose to start clinical trials
Call for Nanotechnologies, Advanced Materials and ProductionNanotechnology and Advanced Materials for more effective Healthcare
3.2
1Appel 2014: Addressing societal challenges
Nanotechnology and Advanced Materials for more effective healthcare
8 Scale-up of nanomedicine production4-5 to 6-
7R&I
Lignes pilotes et procédés intensifiés de production de nanoparticules pour
la médecine, permettant la réalisation d’essais cliniques
9Networking of SMEs in the nano-biomedical
sectorCSA
1
project
Support et mise en réseau de PME pour leur permettre d’accéder aux
innovations en nano biomédical.
10Biomaterials for the treatment of Diabetes
Mellitus 5 R&I
Développement de biomatériaux fonctionnalisés appliqués au traitement
de patients diabétiques, leur permettant une amélioration de conditions de
vie. Réduction coût traitement.
Nanotechnology and Advanced Materials for low carbon energy technologies and Energy Efficiency
13Storage of energy produced by decentralised
sources5 R&I
Solutions matériaux pour le stockage de l’énergie électrique renouvelable
(hors H2)
17Post-lithium ion batteries for electric
automotive applications4 R&I
Nouvelles chimies, nouveaux matériaux au-delà du Li-ion, pour accroitre les
performances, durabilité…des batteries.
1
NMP 8 - 2014: Scale-up of nanopharmaceuticals product ion
* develop one or more pilot lines and processes for the scaling-up of the production of innovative nanopharmaceuticals to the quantities needed for clinical testing, taking into account the medical regulatory requirements. The nanopharmaceuticals (exclusing therapy of cancer) selected for scaling-up shall be translatable and in an advanced stage of pre-clinical development, with positives perspectives to proceed to clinical testing. Clinical testing itself is not part of the project.
* start at TRL 4-5 and target TRL 6-7.
* Type of action: Research & Innovation Actions (100%)
Call for Nanotechnologies, Advanced Materials and ProductionNanotechnology and Advanced Materials for more effective Healthcare
3.3
1
NMP 9 - 2014: Networking of SMEs in the nano-biomedic al sector
* provide advice and follow-up at all stages of the research and development and provide examples of best practice to European R&D teams in nano-bio-medicine. It shall provide SMEs and other organisations with a technological and business oriented assessment of their technologies and provide business advice before engaging further resources and efforts for preclinical and clinical tests.
Type of action: Coordination and Support Action (CSA)no more than one action will be funded
Call for Nanotechnologies, Advanced Materials and ProductionNanotechnology and Advanced Materials for more effective Healthcare
1
NMP 10 - 2014: Biomaterials for the treatment of dia betes mellitus* develop one or more functional biomaterials for the long-term clinical efficacy of transplanted pancreatic islets, and the safe and reliable harvesting of cells from identified source(s); generate comprehensive pre-clinical data and after completion of
the project, the material should be in an optimal position for entering clinical trials or, in case of innovative diagnostic tools, for the validation stage.
* Start TRL 5.
* Type of action: Research & Innovation Actions
Call for Nanotechnologies, Advanced Materials and ProductionNanotechnology and Advanced Materials for more effective Healthcare
1
This challenge taps into nanotechnologies and advanced materials as foundations of low-carbon energy technologies which in turn support the EU objectives to increase the use of renewable energy sources and to significantly improve energy efficiency.
� develop to a technology readiness demonstrating their potential for take-up in practical applications, which would be further pursued in technology or product development under the relevant societal challenge.
Nanotechnology and Advanced Materials for low -carbon energy technologies and Energy Efficiency
3.4
1Appel 2014: Addressing societal challenges
Nanotechnology and Advanced Materials for more effective healthcare
8 Scale-up of nanomedicine production4-5 to 6-
7R&I
Lignes pilotes et procédés intensifiés de production de nanoparticules pour
la médecine, permettant la réalisation d’essais cliniques
9Networking of SMEs in the nano-biomedical
sectorCSA
1
project
Support et mise en réseau de PME pour leur permettre d’accéder aux
innovations en nano biomédical.
10Biomaterials for the treatment of Diabetes
Mellitus 5 R&I
Développement de biomatériaux fonctionnalisés appliqués au traitement
de patients diabétiques, leur permettant une amélioration de conditions de
vie. Réduction coût traitement.
Nanotechnology and Advanced Materials for low carbon energy technologies and Energy Efficiency
13Storage of energy produced by decentralised
sources5 R&I
Solutions matériaux pour le stockage de l’énergie électrique renouvelable
(hors H2)
17Post-lithium ion batteries for electric
automotive applications4 R&I
Nouvelles chimies, nouveaux matériaux au-delà du Li-ion, pour accroitre les
performances, durabilité…des batteries.
3.4
1
NMP 13 - 2014: Storage of energy produced by decentralised sources* develop innovative materials solutions that will make storage technologies (excluding Fuel Cell and Hydrogen Joint Undertaking) more available, better performing and more cost effective. The solutions should exploit synergies between technologies as much as possible, contributing to the development of hybrid systems.
* TRL 5.
* Type of action: Research & Innovation Actions
Nanotechnology and Advanced Materials for low -carbon energy technologies and Energy Efficiency
3.4
1
NMP 17 - 2014: Post-lithium ion batteries for electr ic automotive applications: � a contribution to the Green Vehicles initiative* addressing new chemistries that allow high-energy densities, and by developing related specific new materials e.g. for cathodes and electrolytes* development of prototypes to show clear progress beyond existing post lithium-ion technology in terms of durability, cyclability and energy density, with consideration of scalability up to full scale for automotive applications.
• TRL 5.
* Type of action: Research and Innovation Actions
Nanotechnology and Advanced Materials for low -carbon energy technologies and Energy Efficiency
3.4
14.1
Appel 2014: Overarching aspects
Safety of nanotechnology-based applications and support for the development of regulation
28
Joint EU & MS activity on the next phase of
research in support of regulation “NANOREG
II"
5R&I, 1
project
Développer des approches réglementaires pour la production de
nanomatériaux de façon sûre. Valider outils et méthodologie.
29Coordination of EU and international efforts in
safety of nanotechnologyCSA
1
project
Coordonner les efforts de recherche visant à la gestion des risques liés aux
nanotechnologies, rationaliser et mettre en commun les données.
30Assessment of environmental impact of
nanomaterials4 R&I
Développement d’un cadre de modélisation et des tests, sur le cycle de vie
du produit pour évaluer l’impact environnemental de nanomatériaux.
33Novel visualization tools for enhanced
nanotechnology awarenessCSA
1
project
Outil visuel de communication vers le grand public, sur les
nanotechnologies, pour faciliter l’acceptation et prendre la mesure des
risques.
35 The Materials "Common House" CSA1
project
Suivi des innovations en science et ingénierie des matériaux au travers de
l’EU pour une action ultérieure plus efficace.
36
Networking and sharing of best practises in
management of new advanced materials
through the eco-design products, eco-
innovation and product life-cycle management
CSA
Mise en réseau d’acteurs partageant des connaissances et des bonnes
pratiques en eco-design, éco-innovation et ACV de produits utilisant des
matériaux avancés
37
Business models with new supply chains for
sustainable customer-driven small series
production
6-7 I
Modèle de chaine d’approvisionnement pour la production de petite série,
plus flexible, plus rapide, axé sur la demande, localisé pour réduire l’impact
environnemental.
38Facilitating knowledge management,
networking and coordination in NMPCSA
AC pour mise en commun d’un système de gestion des connaissances issus
de NMP, reposant sur des indicateurs, et de proposer une stratégie pour le
futur de l’outil ERA-NET.
39Practical experience and facilitating combined
funding for large-scale RDI initiativesCSA
1
project
Réflexion sur le financement de grands projets de RDI, combinant
différentes sources de financement afin d’accroitre le nb de projets cross-
KET financés.
Addressing generic needs in support of governance, standards, models and structuring in nanotechnology, advanced
materials and production
3.5
1Call for Nanotechnologies, Advanced Materials and Production
1
1
The Factories of the Future Public-Private Partnership (PPP) initiative aims at helping EU manufacturing enterprises, in particular SMEs, to adapt to global competitive pressures by developing the necessary key enabling technologies to support EU manufacturing across a broad range of sectors.
�help European industry to meet the increasing global consumer demand for greener, more customised and higher quality products through the necessary transition to a demand-driven industry with lower waste generation and energy consumption.
� projects are expected to be performed by industrial organisations themselves.
Call for FoF –Factories of the Future
3.6
1Appel 2014: Manufacturing & Processing
FoF - Factories of the Future
Optimisation de process de production selon différentes approches :
* Production adaptative et intelligente basée sur la cybernétique (CPS)
* Méthode de contrôle intégrative de process
* Fabrication collaborative et mobile à gestion délocalisée,
* Production « zéro défaut » par prototypage laser.
FoF.2
Manufacturing processes for complex
structures and geometries with efficient use
of material
4-6 R&I
Procédé de production de structures de formes complexes, permettant une
réduction de l’utilisation de la ressource matière, du taux de pièces
défectueuses et de l’énergie consommée.
FoF.3Global energy and other resources efficiency
in manufacturing enterprises4-6 R&I
Evaluation des consommations (matière et énergie) dans les entreprises de
production, nouveaux business modèles, nouvelle organisation, nouvelle
stratégie pour réduire ces consos.
FoF.4Developing smart factories that are attractive
to workers5-7 I
Activité de démo basée sur de nouveaux modèles et outils pour une
meilleure utilisation des RH et une amélioration de la productivité
FoF.5Innovative product-service design using
manufacturing intelligence4-6 R&I
Conception de produit/service basée sur des systèmes de fabrication
"intelligente"intégrant des outils d'ingénierie et des logiciels, afin de
répondre aux exigences de qualité, d'adaptation au marché et d'impact
environnemental.
FoF.6
Symbiotic human-robot collaborations for safe
and dynamic multimodal manufacturing
systems
5-7 IDémonstration de système de production automatisée reposant sur une
collaboration entre l'homme et le robot mieux sécurisée et plus efficace.
FoF.7Support for the enhancement of the impact of
the FoF PPP projectsCSA
Rapprochement d'activités FoF en cours et collaboration étroite entre les
parties prenantes, afin d'améliorer l'exploitation et la dissémination des
résultats du programme.
FoF.1 Process optimization of manufacturing assets ICT-NMPR&I +
CSA
3.6
1
FoF 1 – 2014: Process optimisation of manufacturing a ssetsone of the three themes :CPS-based process optimisation (Cyber-Physical Syst ems) for adaptive and smart manufacturing systems bringing together novel concepts for CPS, progress in advanced control and new modelling and simulation technologies.Collaborative and mobile manufacturing: Development of agile collaboration tools for process optimisation of manufacturing assets across the supply chain towards the Cloud-enabled Manufacturing Business Web. Towards zero-failure laser-based manufacturing: Fast and accurate process monitoring systems allowing feedback control of laser process parameters in highly dynamic manufacturing processes.
Types of action: Research & Innovation Actions/ CSA
Call for FoF –Factories of the Future
3.6
1
FoF 2 – 2014: Manufacturing processes for complex str uctures and geometries with efficient use of material
* Innovative resource-efficient manufacturing processes* Innovative energy efficient machinery* Developments in process control allowing both to cope with more recycling in the process and to increase output quality
* TRL between 4-6.
* Type of action: Research & Innovation Actions
Call for FoF –Factories of the Future
3.6
1FoF 3 – 2014: Global energy and other resources effic iency in manufacturing enterprises* Development and implementation of new business models aimed at reducing energy and resource consumption along the whole or a relevant part of the value chain* Clustering of factories, suppliers or any other company* Development of strategies for enabling energy characterisation of enterprises* Development of coherent detailed business cases, including economic, strategic and commercial analysis, of the business models developed during the project.
TRL ??
Type of action: Research & Innovation Actions
Call for FoF –Factories of the Future
3.6
1FoF 4 – 2014: Developing smart factories that are att ractive to workers* Methodologies and tools for efficient design or re-adaptation of production facilities* New methods and technologies for an optimised take-up and use of workers' knowledge* Integration of innovative production technologies supporting increased productivity and flexibility.* Incorporating aspects linked to education, workers' training and attractiveness to youth (e.g. in-factory teaching, 'factory-lab' concepts).
* TRL between 5-7.
* Type of action: Innovation Actions.
Call for FoF –Factories of the Future
3.6
1
FoF 6 – 2014: Symbiotic human-robot collaborations fo r safe and dynamic multimodal manufacturing systems
* demonstrating the multimodal manufacturing systems (e.g. systems combining visual, auditory and haptic interfaces) + R&D activities supporting integration and scale-up * Safety of the worker* Human-Robot interaction
TRL between 5-7
Type of action: Innovation Actions.
Call for FoF –Factories of the Future
3.6
1Call for FoF –Factories of the Future
3.6
1
The objective of the Energy-efficient Buildings Public-Private Partnership (PPP) Initiative is to drive the creation of a high-tech building industry which turns energy efficiency into a sustainable business, fostering EU competitiveness in the construction sector on a global level.
�implement and optimise building and district concepts that have the technical, economic and societal potential to drastically reduce energy consumption and decrease CO2 emissions
�delivering new building technologies, materials and components for energy saving and energy generation, thermal energy storage systems, advanced insulation systems, thermal distribution systems, lighting, windows and glazing, energy generation systems based on renewable sources.
Call for EeBEnergy-efficient Buildings
3.7
1Appel 2014: Manufacturing & Processing
EeB – Energy-efficient Buildings
EeB.1 Materials for building envelope 6+ IDéveloppement de nouveaux matériaux ou composants d’enveloppe à plus
faible contenu énergétique et propriétés d’isolation améliorées
EeB.2Adaptable envelopes integrated in building
refurbishment projects 4-6 R&I
Amélioration des caractéristiques de toit et façade pour s’adapter à des
environnements changeants. Baisse de consommation.
EeB.3
Development of new self-inspection
techniques and quality check measures for
efficient construction processes
4-6 R&I
Nouvelle technique d’autodiagnostic portable permettant de contrôler
pendant la phase de construction les performances attendues (thermique,
phonique, qualité de l’air), d’éviter les ponts thermiques,…
EeB.4Support for the enhancement of the impact of
EeB PPP projects CSA
Cluster d’activités EeB existantes pour favoriser leur exploitation et
dissémination.
SPIRE – Sustainable Process Industries
SPIRE.1 Integrated process control 3-5 R&I
Technologies de contrôle de process en temps réel (capteurs miniaturisés,
traitement de données, stratégie de contrôle) pour réduction des
ressources, adaptation et flexibilité
SPIRE.2
Adaptable industrial processes allowing the
use of renewables as flexible feedstock for
chemical and energy applications
5-7 I
Nouveaux procédés de valorisation des résidus organiques et gazeux
renouvelables, comme matière première pour la production de substances
chimiques ou de carburants, prenant en compte les variations diurnes et
saisonnières
SPIRE.3Improved downstream processing of mixtures
in process industries5-7 I
Procédé de production permettant de réduire en aval les coûts de
séparation, purification. Typiquement la production continue vs en batch,
les microréacteurs (sélectivité améliorée)
SPIRE.4
Methodologies, tools and indicators for cross-
sectorial sustainability assessment of energy
and resource efficient solutions in the process
industry
CSA
Etude multi-sectorielle sur les industries de process afin d’identifier et de
partager les bonnes pratiques et les besoins de RDI, pour une meilleure
efficacité de l’utilisation des ressources
3.7
1
EeB 1 – 2014: Materials for building envelope
•development of new materials and/or solutions for building envelope components with reduced embodied energy, lower CO2 emissions and improved insulation properties during operation• improve indoor air quality, by limiting VOCs emissions and/or by advanced properties aiming to absorb and biodegrade indoor contaminants.
* TRL 6 and above.
* Type of action: Innovation Actions.
Call for EeBEnergy-efficient Buildings
3.7
1
EeB 2 – 2014: Adaptable envelopes integrated in build ing refurbishment projects
• advanced materials or technologies for energy generation and storage• smart and performance insulation materials• near infrared reflecting and cool coatings; adaptable innovative pre-cast solutions• strategies for improved air quality, moisture control, ventilation control and energy recovery• enhanced acoustic properties; …
TRL between 4-6.
Type of action: Research & Innovation Actions
Call for EeBEnergy-efficient Buildings
3.7
1
EeB 3 – 2014: Development of new self-inspection techniq ues and quality check measures for efficient constructi on processes
• focus on new self-inspection techniques and quality check measures for efficient construction processes enabled by portable and robust systems that can be easily handled in the construction site • avoid or reduce economic and time deviations of the construction processes.
* TRL between 4-6.
* Type of action: Research & Innovation Actions
Call for EeBEnergy-efficient Buildings
3.7
1Call for EeBEnergy-efficient Buildings
3.7
1Appel 2014: divers
SILC - Sustainable Industry Low Carbon II
SILC II Sustainable Industry Low Carbon 5-7 50%Solutions (non)technologiques pour réduire les GES dans les industries
manufacturières
Fast Track to Innovation - Pilot
ICT-29Development of novel materials and systems
for OLED lightingICT-NMP
R&I
small
Nouveaux matériaux, procédés et dispositifs pour l'éclairage OLED, pour une
rupture en cout/performance et en consommation énergétique;
WASTE.1Moving towards a circular economy through
industrial symbiosis
SC5-
NMPI
Procédés et services innovants permettant d’accroitre la durée de vie d’un
produit ou de ses composants (via leur valorisation) et réduire ainsi la
production de déchets
3.8
1
cutting edge-biotechnologies are paramount to assure that the European industry is to stay at the front line of innovation, also in the medium and long term.
�synthetic biology : influence, or even transform a range of areas of our economy and society.
� bioinformatics : clear-cut limits on the ability to realize the full value of biotechnology.
Call for BiotechnologiesCutting-edge biotechnologies as future innovation drivers
3.9
1Appels 2014-2015: Biotechnologies
BIOTECHNOLOGY 2014
1Synthetic biology – design of organisms for
new products and processes3-5 R&I
Biologie synthétique pour la construction et la refonte de systèmes
biologiques non naturels, en vue d’applications en santé, chimie,
environnement. Ethique et évaluation risques.
3Widening industrial application of enzymatic
processes5-7 I
Développement de biocatalyseurs pour de nouvelles synthèses chimiques à
large échelle
4Downstream processes unlocking
biotechnological transformations5-7 I
Accroître la productivité des bioprocédés en améliorant les opérations en
aval de séparation, purification,…afin de les rendre économiquement
viable.
BIOTECHNOLOGY 2015
2New bioinformatics approaches in service of
biotechnology3-5 R&I Nouvelle approche en bioinformatique au service de la biotechnologie
5 Metagenomics as innovation driver 3-5 R&I La métagénomique comme moteur d'innovation
3.9
1
BIOTEC 1 – 2014: Synthetic biology – construction of organisms for new products and processes
* aiming on innovative approaches for different industrially relevant products: artificial design and/or simplification of the genomes and their use for the predictable engineering of biotechnological applications; the design of robust and sustainable biomolecular circuits and pathways as well as the need to develop standards and creation of orthogonal biological systems.
* TRL between 3 and 5.
* Type of action: Research & Innovation Actions
Call for BiotechnologiesCutting-edge biotechnologies as future innovation drivers
3.9
1
BIOTEC 3 – 2014: Widening industrial application of enzymatic processes
* Development of specific robust biocatalysts for application at a large scale: oxidoreductases, oxygenases, lyases.
design and development of generic platform technologies and methods for fast and accurate enzyme activity determination and enzyme optimization enabling the design of highly efficient biocatalysts with an expanded range of substrates and for industrially important conversions.
* TRL between 5 and 7.
* Type of action: Innovation Actions (70%)
Call for BiotechnologiesBiotechnology-based industrial processes driving competitiveness and sustainability
3.9
1
BIOTEC 4 – 2014: Downstream processes unlocking biotechnological transformations
* develop and demonstrate downstream processes which overcome the often low and complex productivity of bioprocesses: in-situ product removal, separation and purification technologies, newly developed materials (e.g. membranes, adsorbents, resins, etc.), reliable scale-up methods.
*TRL between 5 and 7.
*Type of action: Innovation Actions
Call for BiotechnologiesBiotechnology-based industrial processes driving competitiveness and sustainability
3.9
1Call for Biotechnologies3.9
1
The SPIRE Public-Private Partnership (PPP) brings together cement, ceramics, chemicals, engineering, minerals and ores, non-ferrous metals, steel and water sectors, several being world-leading sectors operating from Europe.
� integration of relevant training/learning as well as identify appropriate business models to ensure subsequent market implementation and potential barriers for cross sectorialtechnology transfer
Call for SPIRE –3.10
1Appel 2014: Manufacturing & Processing
EeB – Energy-efficient Buildings
EeB.1 Materials for building envelope 6+ IDéveloppement de nouveaux matériaux ou composants d’enveloppe à plus
faible contenu énergétique et propriétés d’isolation améliorées
EeB.2Adaptable envelopes integrated in building
refurbishment projects 4-6 R&I
Amélioration des caractéristiques de toit et façade pour s’adapter à des
environnements changeants. Baisse de consommation.
EeB.3
Development of new self-inspection
techniques and quality check measures for
efficient construction processes
4-6 R&I
Nouvelle technique d’autodiagnostic portable permettant de contrôler
pendant la phase de construction les performances attendues (thermique,
phonique, qualité de l’air), d’éviter les ponts thermiques,…
EeB.4Support for the enhancement of the impact of
EeB PPP projects CSA
Cluster d’activités EeB existantes pour favoriser leur exploitation et
dissémination.
SPIRE – Sustainable Process Industries
SPIRE.1 Integrated process control 3-5 R&I
Technologies de contrôle de process en temps réel (capteurs miniaturisés,
traitement de données, stratégie de contrôle) pour réduction des
ressources, adaptation et flexibilité
SPIRE.2
Adaptable industrial processes allowing the
use of renewables as flexible feedstock for
chemical and energy applications
5-7 I
Nouveaux procédés de valorisation des résidus organiques et gazeux
renouvelables, comme matière première pour la production de substances
chimiques ou de carburants, prenant en compte les variations diurnes et
saisonnières
SPIRE.3Improved downstream processing of mixtures
in process industries5-7 I
Procédé de production permettant de réduire en aval les coûts de
séparation, purification. Typiquement la production continue vs en batch,
les microréacteurs (sélectivité améliorée)
SPIRE.4
Methodologies, tools and indicators for cross-
sectorial sustainability assessment of energy
and resource efficient solutions in the process
industry
CSA
Etude multi-sectorielle sur les industries de process afin d’identifier et de
partager les bonnes pratiques et les besoins de RDI, pour une meilleure
efficacité de l’utilisation des ressources
3.10
1SPIRE 1 – 2014: Integrated Process Control* Development of new technologies in:Cross-sectorial application of process analyser technology (PAT) and product measurement techniques (PPMT) in closed-loop process control capable of inline measurements.Integration methodologies within a large number of production conditions.Swarm sensors.Development of new soft-sensors and sensing concepts and models for improved process control using PAT data for the measurement of properties and quality of process streams and final products.Miniaturised PAT- and PPMT-based advanced control for intensified processes.Disposable sensors in batch and in continuous processes.Control strategies for flexible processes or disposable sensors using integrated and validated PAT data.Process and Product life cycle management.* TRL 3-5. * Type of action: Research & Innovation Actions
Call for SPIRE –Sustainable Process Industries
3.10
1
SPIRE 2 – 2014: Adaptable industrial processes allow ing the use of renewables as flexible feedstock for chemical and energy applications* develop new processes or improved valorisation approaches that would provide efficient biomass, residue and waste gas conversion (or biomass pre-treatment for further refining) while developing a fully integrated system and the associated equipment for downstream use. � Substantial demonstration activities in conjunction with the development of solution-adapted equipment are expected.
* TRL 5-7.
* Type of action: Innovation Actions
Call for SPIRE –Sustainable Process Industries
3.10
1
SPIRE 3 – 2014: Improved downstream processing of mixtures in process industries* Develop new technologies for
Compatibility with continuous processesReduction of production costs and time to marketSignificant improvements in energy and resource efficiency Significant reduction in greenhouse gas emissions. Improvement in safety of the work environment.
* TRL 5-7.
* Type of action: Innovation Actions
Call for SPIRE –Sustainable Process Industries
3.10
1Call for SPIRE –Sustainable Process Industries
3.10
1WP NMP 2014-20154
1. Overcome the death valley
→ Bridging the gap between nanotechnology research and markets
→ Exploi%ng the cross-sector poten%al of Nanotechnologies and Advanced materials to
drive competitiveness and sustainability
2. NM addressing societal challenges
→ Nanotechnology and Advanced Materials for more effec%ve Healthcare
→ Nanotechnology and Advanced Materials for low carbon energy technologies and Energy
Efficiency
3. Overraching aspects of NMP
→ Safety of nanotechnology-based applica%ons and support for the development of
→ Addressing generic needs in support of governance, standards, models and structuring in
nanotechnology, advanced materials and production
4. Advanced manufacturing and processing: 3 PPP
→ FoF - Factories of the Future
→ EeB – Energy-efficient Buildings
→ SPIRE – Sustainable Process Industries
5. Biotechnologies et divers
1Appel 2015: Overcome the death valley
Bridging the gap between nanotechnology research and markets
2Integration of novel nano materials into
existing production lines5-6 to 7 I
Intégration de nouveaux matériaux nano dans les lignes de production
existantes
3Manufacturing and control of nanoporous
materials4-5 to 6 I Ligne de fabrication et contrôle de matériaux nanoporeux
6 Novel nanomatrices and nanocapsules 4-5 R&I Nouvelles nanomatrices et nanocapsules, sureté
7Additive manufacturing for tabletop
nanofactories4-5 R&I
Incorporation d'additifs "nano" dans une chaine de production pour de
nouveaux produits intégrant de nouvelles fonctions
19Materials for severe operating conditions,
including added-value functionalities 5 R&I
Matériaux pour les conditions de fonctionnement sévères, présentant
également de nouvelles fonctionnalités à valeur ajoutée
22Fibre-based materials for non-clothing
applications5-6 I Matériaux à base de fibres pour des applications hors habillement
23Novel materials by design for substituting
critical elements3-4 R&I Nouveaux matériaux par conception pour substituer des éléments critiques
24Low-energy solutions for drinking water
production
4-5 to 6-
7I
Solutions à faible consommation d'énergie pour la production d'eau potable -
usines pilotes
25
Inducement prize for the dev. of new materials
and materials-based creative solutions by
upstream coll.between materials scientists and
designers
PRIZE
Prix d'incita%on pour le développement de nouveaux matériaux et de
solutions créatives à base de matériaux reposant sur une collaboration entre
les scientifiques des matériaux et des designers
26
Accelerating the uptake of nanotechnologies,
advanced materials or advanced manufacturing
and processing technologies by SME
Accélérer le transfert de technologie des NM, en 3 phases : faisabilité (50k€),
activités d’innovation, plan de développement et de commercialisation
Exploiting the cross-sector potential of Nanotechnologies and Advanced materials to drive competitiveness and sustainability
SME instrument
4.1
1Appel 2015: Addressing societal challenges
Nanotechnology and Advanced Materials for more effective healthcare
11 Nanomedicine therapy for cancer4-5 to 6-
7R&I Thérapie issue de la nanomédecine pour le traitement du cancer
12Biomaterials for treatment and prevention of
Alzheimer’s disease5 R&I Biomatériaux pour le traitement et la prévention de la maladie d'Alzheimer
Nanotechnology and Advanced Materials for low carbon energy technologies and Energy Efficiency
14 ERA-NET on Materials ERA-NETCOFUND
10M€ERA-NET sur les matériaux y compris pour l'énergie
15Materials innovations for the optimisation of
cooling in power plants6 I
Matériaux innovants pour l'optimisation du refroidissement dans les
centrales électriques
16
Extended in-service life of advanced functional
materials in energy technologies (capture,
conversion, storage and/or transmission of
energy)
6 I
Prolonger la durée de vie des matériaux fonctionnels avancés « en-service »
dans les technologies énergétiques (capture, transformation, stockage et /
ou transport de l'énergie)
4.2
1Appel 2015: Overarching aspects
Safety of nanotechnology-based applications and support for the development of regulation
30Increas ing the capacity to perform
nanos afety as ses sment4 100%
Renforcer la capacité d'effectuer une éva luation en
nanos écuri té
31Next generation tools for ri sk governance
of Nanomateria ls5 100%
Outi l s de prochaine génération pour la ges tion des ri sques
as sociés aux nanomatériaux
33Societa l engagement on res pons ible
nanotechnologyCSA 1 project
Engagement s ociéta l pour des nanotechnologies
respons ables
41 Pres idency events CSA
Addressing generic needs in support of governance, standards, models and structuring in nanotechnology, advanced
materials and production
4.3
1Appel 2015: Manufacturing & Processing
Titre - Date – N° page
FoF - Factories of the Future
FoF.8ICT-enabled model ing, s imulation,
analys i s and forecasting technologies
ICT-
NMP
R&I +
CSA
La modél i sation, la s imulation, l 'analyse et les technologies
prédictives
FoF.9 ICT innovation for Manufacturing SMEICT-
NMPI+CSA Innovation dans les TIC pour les PME manufacturières
FoF.10Manufacturing of custom made parts for
persona l ised products4-6 R&I
Fabrication de pièces fa i tes sur mesure pour les produi ts
personna l i sés
FoF.11
Flexible production sys tems based on
integrated tools for rapid
reconfiguration of machinery and robots
5-7 I Sys tèmes de production flexibles basés sur des outi l s intégrés
pour la reconfiguration rapide des machines et robots
FoF.12
Industria l technologies for advanced
joining and assembly processes of multi -
materia ls
5-7 I Technologies industriel les de pointe pour les procédés
d'assemblage de multi -matériaux
FoF.13
Reuse, remanufacturing technologies
and equipment for susta inable product
l i fe cycle management
4-6 R&I Technologies et équipements pour réuti l i ser, refabriquer, pour
une gestion durable du produi t
FoF.14Integrated des ign and management of
production machinery and processes4-6 R&I
La conception intégrée et la gestion des machines et procédés de
production
4.4
1Appel 2015: Manufacturing & Processing
EeB – Energy-efficient Buildings
EeB.5Innovative design tools for refurbishment at
building and district level5-7 I
Outils de conception innovante pour la rénovation au niveau du bâtiment et
du district
EeB.6Integrated solutions of thermal energy storage
for building applications4-6 R&I
Solutions intégrées de stockage d'énergie thermique pour des applications
dans la construction
EeB.7
New tools and methodologies to reduce the
gap between predicted and actual energy
performances at the level of buildings and
blocks of buildings
5-7 I
Nouveaux outils et méthodologies visant à réduire l'écart entre les
performances énergétiques prévus et réels au niveau des bâtiments et des
ensembles.
EeB.8Integrated approach to retrofitting of
residential buildings5-7 I
Validation d'une approche intégrée de rénovation de bâtiments
résidentiels
SPIRE – Sustainable Process Industries
SPIRE.5New adaptable catalytic reactor methodologies
for Process Intensification3-5 R&I
Nouvelles méthodologies pour des réacteurs catalytiques adaptables à
l'intensification des procédés
SPIRE.6Energy and resource management systems for
improved efficiency in the process industries4-6 R&I
Systèmes de gestion de l'énergie et des ressources pour améliorer
l'efficacité d'industries de transformation
SPIRE.7Recovery technologies for metals and other
minerals5-7 I Technologies de récupération de métaux et autres minéraux
SPIRE.8Solids handling for intensified process
technology5-7 I
Management de solides dans une unité de production en continu via une
intensification des procédés
4.5
1Autres thèmes liés à NMP (1/3)
Pilier 1 : Infrastructures, ERC, FET ProActive (pas dans 1er appel),FET Flagship Graphene
Pilier 2:
ICT: ICT 2-3 A new generation of components and systems
ICT 25-26-27-28 Micro-nano electronics, photonics
Space: COMPET 2 – 2014: Independent access to space (nouveaux matériaux pour structures légères)
COMPET 4 – 2014: Space Robotics Technologies (capteurs, actionneurs, matériaux et structures)
COMPET 6 – 2014: Bottom-up space technologies at low TRL
(matériaux avancés)
COMPET 2 – 2015: Independent access to space (matériaux avancés)
COMPET 3 – 2015: Bottom-up space technologies at low TRL
(matériaux avancés)
Instrument PME / Fast track
5
1Pilier 3:SC1 (Santé) : PH 9-2014 Development of new diagnostic tools and technologies: in
vitro devices, assays and platform (nanotechnologie + microfluidique)
PH15-2015 Tools and technologies for advanced therapies(biomatériaux)
SC2 (Agro): ISIB 5-2014, ISIB 6-2015, ISIB 7-2014 Sustainable and competitive bio-based industries (biomasse, bioraffinerie, biofuels, lien avec SPIRE)
SC3 (Energie): EE 13- 2014/15 Technology for district heating and cooling(matériaux isolants)
LCE 1 – 2014 New knowledge and technologies (matériaux et système de production avancés)
LCE 2 – 2014/15: Developing the next generation technologies of renewable electricity and heating/cooling (matériaux à bas coût)
LCE 3 – 2014/2015: Demonstration of renewable electricity and heating/cooling technologies (matériaux pour le photovoltaïque)
LCE 10 – 2014: Next generation technologies for energy storage (nouveaux matériaux)
LCE 11-2014/2015, LCE 12-2014/2015, LCE 13-2015, LCE 14-2014/2015 Sustainable biofuels and alternative fuels for
the European transport fuel mix (biomasse, bioraffinerie, biofuels, lien avec SPIRE)
Autres thèmes liés à NMP (2/3)5.1
1SC4 (Transport): MG.1.5-2014-2015.International cooperation in aeronautic
(nouveaux matériaux et procédés de fabrication, matériaux composites)
MG.4.1-2014.Towards the energy efficient and emission free vess el (nouveaux matériaux)
MG.8.1-2014.Smarter design, construction and maintenance(matériaux auto- cicatrisant et auto-nettoyant, application des nanotechnologies aux coatings)
GV.1-2014 Next generation of batteries for fully electric aut o. Applications
SC5 (Envt): Waste.1 Moving towards a circular economy through industria l symbiosis
Waste 3 Recycling of raw materials from products and buildings
H2020 – SC5_10 – 2014/2015: New solutions for sustainable production
of raw materials (ex: nouveaux systèmes métallurgiques)
H2020 – SC5_11 – 2014/2015 Innovative and sustainable solutions leading to substitution of raw material (nouveaux matériaux pour l’électronique, matériaux sous conditions extrêmes)
EIT/KIC: Raw Materials (2014) – Manufacturing (2016)
Art 185: Eurostars (PME) – Empir (Metrology)
Autres thèmes liés à NMP (3/3)5.2
1
H2020 - NMPAnimation nationale
6
1NMP: l’animation nationale6.1
RCP: Représentant au Comité Programme
Gilles Le Marois MESR [email protected]
Fabrice Leroy MRP [email protected]
PCN: Point de Contact National
Gilles Le Marois (coord.) CEA [email protected]
Lucie Vaucel CPU [email protected]
Sébastien Leroy IRT [email protected]
Abdelilah Slaoui CNRS [email protected]
S’appuie sur le futur site web FR, à forte visibilité http://www.horizon2020.gouv.fr
1Manifestations organisées par le PCN6.2
Brokerage event à Strasbourg le 29 novembre- Co-organisé avec le PCN allemand, ouvert à tout partenaire EU- 3 temps forts :
· Session plénière en présence de la Commission Européenne,· Ateliers thématiques parallèles avec présentation de projets/idée/expertise (thèmes NMP et en lien avec dans d’autres programmes)· Rendez-vous de partenariat en face à face
http://www.b2match.eu/kets2014/
Séminaire FR -IT à Grenoble, les 21 -22 octobre- 3 temps forts :
· Présentation des activités et compétences des organismes,· Présentation d’idées de projets, · Rendez-vous de partenariat en face à face
1Manifestations organisées par le PCN6.3
Infodays en Région, calendrierDate Lieu Format Contact Région
CD LV SL AS GLM
27/09/2013 Grenoble X Elodie Wagner
21/10/2013 Grenoble X Séminaire FR-IT Elodie Wagner
08/11/2013 Limoges X Table ronde Martin Forst
12/11/2013 NPdC+Picardie X Catherine Dupas
12/11/2013 Pays de Loire X Gaetan Drouet
15/11/2013 Lorraine-IRT X Nathalie Hiesiger
19/11/2013 Toulouse X Christine Guidice
19/11/2013 Tours X Aurélie Uchard
21/11/2013 Limoges X Martin Forst
22/11/2013 Montpellier X Conception Avila
29/11/2013 Alsace+Ch Ardennes X X X X Brokerage event Isabelle Gouriou
02/12/2013 Bordeaux X Caroline Angeli
10/12/2013 Bourgogne-Fr C X Laurent Volle
13/12/2013 Aix-Marseille X Nicolas Chéhanne
07/01/2014 Clermont-Ferrand X Claire Soriano
sem II-2014 Poitou-Charentes X Frédéric Suche
sem III-2014 Sorbonne Paris Cité X Amélie Antoine
Animateur PCN
1Manifestations organisées par le PCN6.4
Infodays en Région, format:
Présentation de H 2020, de ses règles de participation et de ses règles financières. Différences avec FP7.
Présentations des différents dispositifs régionaux d’accompagnement au montage de projets
Présentation du programme de travail. Présentation éventuelle selon les régions des synergies entre le programme de travail et la S3.
RDV B to B entre chercheurs, industriels, cellules d’ingénierie de projets et Points de Contact Nationaux
1Actions MESR
15 octobre 2013: Lancement du portail françaisdédié au programme Horizon 2020
http://www.horizon2020.gouv.fr/
OBJECTIFS:
• Accompagner la communauté scientifique et industrielle vers le nouveau programme Horizon 2020• Permettre la transition entre le 7ème PCRD et le nouveau programme Horizon 2020• Faciliter l’accès à l’information sur les programmes européens• Se renseigner auprès des 20 nouveaux Points de Contacts Nationaux (P.C.N.).
LES POINTS FORTS DU PORTAIL:
• Recensement des ressources disponibles sur Horizon 2020• Valorisation des actualités sur les appels à projets• Informations pratiques pour répondre aux appels à propositions• Espace dédié à la recherche de partenaires• Alertes par domaine• Lettres d’information• Moteur de recherche spécifique• Valorisation des manifestations organisées en France sur chacun des programmes d’Horizon 2020.
6.5
1Actions MESR
Lancement du programme Horizon 2020:Les sessions nationales
OBJECTIFS :
• Faire connaître les différentes priorités et programmes d’Horizon 2020• Faire connaître ce qui change par rapport au 7ème PCRDT• Préparer techniquement la communauté à répondre aux appels.
DESCRIPTION :
• Une vingtaine de sessions d’information/formation d’une demi-journée chacune, ciblées sur des communautés, faisant intervenir des spécialistes de chaque domaine• Mise en ligne de tous les contenus présentés sur www.horizon2020.gouv.fr• 4000 participants attendus.
6.6
1Actions MESR
Lancement du programme Horizon 2020:Le calendrier des sessions nationales
Jour Session matin Session après midi
7/11/2013 Infrastructures Poincaré
25/11/2013 Lancement
HORIZON 2020
Grands Principes & Mise en Œuvre
Présentation du Dispositif
d’accompagnement
Poincaré Règles de participation
Modèles de coûts
Poincaré
26/11/2013 RdP – Convention de subvention Poincaré RdP – propriété Intellectuelle Poincaré
27/11/2013 ERC Poincaré Actions Marie Slodowska Curie Poincaré
28/11/2013 1- Santé, démog, Bien ëtre Poincaré 2 - Défis de la bioéconomie &
biotech
Poincaré
29/11/2013 KET in HORIZON 2020 –( NMP) Strasbourg ( Conseil
Régional)
2/12/2013 Transport Poincaré FET MESR
3/12/2013 6 -Société innovantes etc Poincaré SSH dans HORIZON 2020 Poincaré
4/12/2013 TIC ?? Poincaré TIC ?? Poincaré
5/12/2013 Espace CNES ou
Poincaré
6/12/2013 PME dans H2020 ??? DGCIS /BPI Accès aux financements a
Risques ???
DGCIS
17/12/2013 Energie Poincaré Environnement Poincaré
6.7
1Actions MESR
Lancement du programme Horizon 2020:Les sessions en région
OBJECTIFS :
• Faire connaître les différentes priorités et programmes d’Horizon 2020 à l’ensemble de la communauté FR de RDI• Faire connaître ce qui change par rapport au 7ème PCRDT• Préparer techniquement la communauté à répondre aux appels.
DESCRIPTION :
• Des interventions des PCN sur tout le territoire, en interaction avec les acteurs du dispositif d’accompagnement• Alerte sur ces manifestations sur www.horizon2020.gouv.fr• Une centaine de réunions prévues.
6.8
1Actions MESR
Le 16 décembre: Manifestation de lancement du programme Horizon 2020
OBJECTIFS :
• Donner le coup d’envoi FR du programme Horizon 2020• Montrer notre résolution FR à s’engager au plus haut niveau dans l’Europe de la recherche et de l’innovation• Mobiliser la communauté de recherche et d’innovation (directeurs de laboratoires, chefs d’entreprise, jeuneschercheurs, etc.).
DESCRIPTION :
• Manifestation festive et conviviale, point final d’une année de préparation à H2020• 800 personnes attendues, présence de personnalités de la recherche, du gouvernement, de la CE• Dans ce cadre, remise des Etoiles de l’Europe• Face to face meeting avec les PCN.
6.9
1Actions MESR
Les Etoiles de l’Europe
OBJECTIFS :
• Honorer des équipes de chercheur-e-s et leur coordinat-eur-rice pour leur engagement européen et leur travail de rassemblement et de coordination de projets
• Montrer que les équipes françaises de chercheur-e-s qui réussissent, font le “choix de l’Europe” pour la recherche et l’innovation (effet d’entraînement)
• Marquer un temps annuel de rassemblement et de mobilisation dans la durée autour de la recherche et l’Europe.
DESCRIPTION :
• 12 étoiles• 3 catégories « Excellence scientifique », « Primauté industrielle », « Défis sociétaux »• Un appel à candidatures (projets clos entre le 1er juillet 2012 et le 30 juin 2013)• Un jury de sélection.
6.10
1
http://www.horizon2020.gouv.fr/
http://www.horizon2020.gouv.fr/acteurs-nmpIdentifiant : nmp Mot de passe : nmp