presentation on hmt ltd
DESCRIPTION
Presentation on HMT LtdTRANSCRIPT
SLIE
T, Lo
ng
ow
al
Presentation on HMT Ltd. PinjoreFIVE WEEKS TRAINING
1
SLIET, Longowal
Submitted To Submitted By
Dr. Manoj Goyal Harpreet Singh GME/133601Amritpal Singh GME/113716Kulwinder Singh Lotte GME/113720
2
SLIET, Longowal
About HMT
o HMT was First Incorporated by the Government of India in 1953 as the first machine tool manufacture in the country to supply machine tools for the Indian Manufacture Industries.
o The second unit was set up in the Bangalore in 1959 making use of company’s own.
o The third unit was set up in 1963 at Pinjore to produce Milling machine.
3
SLIET, Longowal
HMT Products4
SLIET, Longowal
Various Shops in HMT
Pattern Shop
Foundry Shop
Heat Treatment Shop
Machine Shops
Engine Assembly
Engine Testing
Tractor Assembly & Testing
5
SLIET, Longowal
Pattern ShopPattern is the first object needed for a casting. The Pattern shop is concerned with the construction of casting.
The commonly used materials in the pattern shop are following :
1.Metal (Aluminium, Cast Iron, Bronze etc)
2.Wood
3.Thermocol.
6
SLIET, Longowal
Foundry Shop
There is well-equipped and modernized foundry running in HMT. There are 3 electric furnaces working in the foundry. All the requirements of tractor division and machine tool division are fulfilled by this foundry. Casting is the final product of the foundry. Liquid metal is poured into mould and the molten metal takes the shape of the cavity.
7
SLIET, Longowal
Heat Treatment
Heat treatment is an operation of heating and cooling of metals in the solid state of induce certain desired properties into them and improve their properties mainly to change their internal properties.
8
SLIET, Longowal
Classification of Heat Treatment9
Hardening
Tempering
Carburising
Annealing
SLIET, Longowal
Advantages of Heat Treatment Shop10
• Avoid crack in material.• Increase strength, hardness, toughness.• Increase wear resistance capacity of material.• Improve machinability.• Improve surface finish.• Reduce internal stress.
SLIET, Longowal
Machine Shop
Light Machine ShopAs the name shows, all the light parts of tractors such as differential housing, power take off shafts, splined shafts, gears, rear wheel driving hubs, portal shafts, main transmission shafts etc. are machined here.
Heavy Machine ShopIn this section, all the heavy parts of the tractor are machined. Gearbox housing, main transmission housing, front cover, hydraulic lift, etc. are machined here.
11
SLIET, Longowal
Main Components of Tractor Engine• Crank Case• Cylinder• Piston• Connecting Rod• Crank Shaft• Cam Shaft • Fly Wheel
12
SLIET, Longowal
Crank Case
It is made of cast iron.
Other parts of the engine are directly or indirectly attached to it.
It is equipped with holes, by which the engine may be firmly anchored to its foundation.
13
SLIET, Longowal
Cylinder
A cylinder is the central working part of a reciprocating engine.
Cylinders are made of high-grade grey cast iron.
It act as combustion chamber for the engine.
14
SLIET, Longowal
Piston & Connecting Rod
Piston of an engine move back and forth in the cylinder owing to the explosion of the fuel mixture.
Piston is surrounded by piston rings which prevent the friction losses.
Connecting rod connects the piston and crank shaft
15
SLIET, Longowal
Engine Assembly16
SLIET, Longowal
Engine Testing
After assembly, engine is brought to engine testing section. In this section practical checking of engine is done on engine and water
supply is connected to it, then the engine is started with the external DC supply.
After this, the proper operating of valves is done, the engine is kept running for two hrs.
During running the load is also varied and various properties like lubricating oil pressure, load capacity, fuel consumption etc is checked.
17
SLIET, Longowal
Engine Testing18
SLIET, Longowal
Tractor Assembly & Inspection
Gear box sub assemblyMain transmission sub assemblyPortal sub assemblyRear axle sub assemblyFront axle sub assembly
19
SLIET, Longowal
Various Models of HMT Tractors
HMT 2522
HMT 3522
HMT 4022
HMT 4922
HMT 5022
HMT 6522
HMT 7522
20
SLIE
T, Lo
ng
ow
al
Thank YouHAVE A GREAT DAY AHEAD
21