8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 1/32

4.1: Introduction to quality assurance inwelded fabrication

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 2/32

4.1: Introduction to quality assurance inwelded fabrication

Quality can not reached by testing, it has to be produced

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 3/32

4.1: Introduction to quality assurance inwelded fabrication

Quality Control

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 4/32

4.1: Introduction to quality assurance inwelded fabrication

Quality Assurance

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 5/32

4.1: Introduction to quality assurance inwelded fabrication

Hot Flare

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 6/32

4.1: Introduction to quality assurance inwelded fabrication

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 7/32

4.1: Introduction to quality assurance inwelded fabrication

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 8/32

4.1: Introduction to quality assurance inwelded fabrication

PipingNippleNipple

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 9/32

4.1: Introduction to quality assurance inwelded fabrication

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 10/32

4.1: Introduction to quality assurance inwelded fabrication

FitterQC

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 11/32

4.1: Introduction to quality assurance inwelded fabrication

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 12/32

4.1: Introduction to quality assurance inwelded fabrication

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 13/32

4.1: Introduction to quality assurance inwelded fabrication

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 14/32

4.1: Introduction to quality assurance inwelded fabrication

Quality Plan

Quality Plan

Quality Plan

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 15/32

4.1: Introduction to quality assurance inwelded fabrication

Management Responsibility. Describes the quality responsibilities of all stakeholders.

Documented Quality Management System. This refers to the existing Quality

Procedures that have been standardized and used within the organization.Design Control. This specifies the procedures for Design Review, Sign-Off, DesignChanges and Design Waivers of requirements.

Document Control. This defines the process to control Project Documents at each

Project Phase.

Purchasing. This defines Quality Control and Quality Requirements for sub-contractingany part / whole part of the project.Inspection Testing. This details the plans for Acceptance Testing and Integration Testing.

Nonconformance. This defines the procedures to handle any type of nonconformance

work. The procedures include defining responsibilities, defining conditions and availability

of required documentation in such cases.Corrective Actions. This describes the procedures for taking Corrective Actions for theproblems encountered during project execution.

Quality Records. This describes the procedures for maintaining the Quality Records(metrices, variance reports, executed checklists etc) during project execution as well asafter the project completion.Quality Audits. An internal audit should be planned and implemented during each phase

of the project.Training. This should specify any training requirements for the project team.

Quality Plan

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 16/32

4.1: Introduction to quality assurance inwelded fabrication

Quality Plan

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 17/32

4.1: Introduction to quality assurance inwelded fabrication

Quality Plan

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 18/32

4.1: Introduction to quality assurance inwelded fabrication

Quality Plan

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 19/32

4.1: Introduction to quality assurance inwelded fabrication

ITPInspection, Test Plan

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 20/32

4.1: Introduction to quality assurance inwelded fabrication

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 21/32

4.1: Introduction to quality assurance inwelded fabrication

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 22/32

4.1: Introduction to quality assurance inwelded fabrication

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 23/32

4.1: Introduction to quality assurance inwelded fabrication

QMS

QMS

QMS

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 24/32

4.1: Introduction to quality assurance inwelded fabrication

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 25/32

4.1: Introduction to quality assurance inwelded fabrication

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 26/32

4.1: Introduction to quality assurance inwelded fabrication

WPSWPQR

WPS

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 27/32

4.1: Introduction to quality assurance inwelded fabrication

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 28/32

4.1: Introduction to quality assurance inwelded fabrication

Major

Minor

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 29/32

4.1: Introduction to quality assurance inwelded fabrication

Major

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 30/32

4.1: Introduction to quality assurance inwelded fabrication

WPS

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 31/32

4.1: Introduction to quality assurance inwelded fabrication

Prepared By: Kourosh Ghadarghadr Jahromikgjahromi@yahoo.com

8/8/2019 Presentation1-010988 [Compatibility Mode]

http://slidepdf.com/reader/full/presentation1-010988-compatibility-mode 32/32

This document was created with Win2PDF available at http://www.daneprairie.com.

The unregistered version of Win2PDF is for evaluation or non-commercial use only.