presentazione standard di powerpoint - blebricks › wp-content › uploads › 2020 › 01 ›...
TRANSCRIPT
Sigfox
Getting started
Let’s beginHow to get your SFX device on-line
1. Write to [email protected] the e-mail address and reference name you want to
use for your Sigfox account
2. within max 24 hours you will receive your access credentials
3. log-in at https://build.sigfox.com/login by using your credentials
4. connect the SFX Blebrick to the BLE-B. Watch the video
5. open our MakeApp for Blebricks
A one-year subscription to the Sigfox network is included with your device therefore we recommend you to start the following procedure when you are intended to use your device.
How to register your device ID & PAC
6.
Tap SFX Brick command
to access extra
commands.
How to register your device ID & PAC
7.
After tapping SFX Brick,
click on GET DEVICE ID. XXXXX
ID XXXXXX
8.
Finally you can get
Device ID and PAC:
you will need them for
the registration to the
Sigfox network at first
use.
Sigfox website
On https://build.sigfox.com/login open the DEVICE tab and click on NEW
Type your Sigfox ID, the more representative
name you want to give to your device and
finally your PAC
2
Click here
1
Sigfox website
Tick the REGISTER AS A PROTOTYPE box to register your device to the Sigfox network
with unlimited traffic for one year.
That’s all folks!
3
Sigfox website
If you correctly followed the previous procedure you will see your device on www.backend.sigfox.com 4
Using the SFX Blebrick, you will also see your devices’ data directly on a customizable web page called Bricksboard.
XXXXXX YYYYYY XXXX