BETTER PARTS BETTER PROFITS

PRESS BRAKES

ADR ADS ADH & LARGE FORMAT ADSL

DURMA

The Company

As a total supplier for sheet metal manufacturing with

almost 60 years of experience, Durma understands and

recognizes the challenges, requirements and expectations

of the industry.

We strive to satisfy the ever higher demands of our

customers by continuously improving our products and processes while researching

and implementing the latest of technologies.

In our three production plants with a total of 1.5 million square feet, we dedicate 1,000 employees to delivering high quality manufacturing solutions at the best performance-to-price ratio in the market.

From the innovations developed at the Research & Development Center to the technical support given by our worldwide distributors, we all have one common mission: to be your preferred partner.

headquarters i Bursa Turkey

R&D Center

charlotte headquarters

Baskoy factory

adr4’ - 20’ + Tandem Systems44 - 660 Tons

ads6’ - 30’ + Tandem/Trio44-3,000 Tons

adh8’ & 10’110 - 150 - 195 Tons

adsl13’ - 30’ + Tandem/Trio660 - 3,300 Tons

press brakesad Series

(S) STANDARD (O) OPTIONAL (-) NOT AVAILABLE

ADR ADS ADH ADSL

Y1,Y2 Ram Positioning s s s s

DA 56 2D Graphical o - - -

DA66T Touch 3D - s s s

Manual Table Crowning o - - -

Automatic Table Crowning o s s s

Programmable X Axis s s s s

Programmable R Axis o s s s

Programmable X Prime - o o o

Programmable Z1,Z2 - o o o

Programmable Six Axis - o o o

Sheet Followers - o o o

Laser Guard Protection o o o 0

Hydraulic Tool Clamping o o o 0

Large Stroke, Daylight & ThroatThe large frame dimensions allow versatile production of parts requiring increased clearance profitably and easily.

• Forming of deep sectioned four sided boxes. . • Forming and Removal of Complex Large Parts

features

Machine FrameThe design of the machine frame is a critical part of any machine with relation to its ability to produce accurate parts for a long period of time. Durma uses several different types of construction depending on the certain dimension such as length, tonnage, stroke, daylight and throat/depth. For details on Durma’s unique box frame construction please the ADSL datasheet.

Precision MachiningModern machining centers are utilized for accuracy, rigidity, and smooth operation. Frames, assembly surfaces and connection holes are machined after the welding process, up to 60’ in a single pass. Surface machining nearly to grinding tolerance: within .002” to .004”. In comparison, inaccurate machining can result in differences between Y1 Y2 (ram level) axes, difficulty holding tools parallel, difficulty holding tool dimensional tolerances and high vibration during the bending process.

Cylinder ConnectionIn order to allow tilting of the ram without damage, special spherical seating and connections are used. This type of connection also allows sudden forces to be absorbed gently.

Ergonomic Working HeightLower beam (bed) height for most machines is optimized at approximately 35 to 36” (excluding die holders and dies) for ergonomic operation.

Lower Deflection & Longer LifeAcceptable industry stress standards for material is 8.5 kg/mm2 stress. All Durma machines must meet a value of 5-6 kg/mm2. These strict standards reduce deflection and increase frame durability and the ability to hold tolerances over long periods of heavy use. All incoming plate must be certified the Durma’s standards and requirements. Durma’s high frame rigidity and robustness provides long-term accurate bending.

features

Y1, Y2 Precision & FlexibilityIn the Y1, Y2 ram positioning system each cylinder operates independently in a closed loop system. Linear encoders combined with precision hydraulic valves and the CNC command center, provide ± .0004” accuracy and the ability to program all ram position, speeds and ram tilt. Application advantages include:

• Stage or Progressive Bending• Fade Out or Conical Work• Enhanced Material Handling with Total Ram Control

Quick-Set Front Sheet SupportsRugged support arms with disappearing stops are mounted on a linear guide rail system. This allows “finger-tip” lateral adjustment as required by the bend length of the part. They are also equipped with side gauges for the fast, easy, and accurate feeding of parts small or large.

features

Oversized Ram GuidesLong rectangular shaped guides assure stable, smooth, and secure ram positioning. Conventional machines can typical have these guides mounted on the inside of the frames resulting in obstructions to full length acute angle bends.

X Axis Back GaugeADR StandardX axis (finger depth) is set automatically via the program. The fingers are mounted on a linear guide for quick, easy, and accurate lateral positioning. A hand crank is located at the top of each finger for height adjustment. Programmable R axis (finger height) is optional.

Shimless BendingADS, ADH & ADSL Standard | ADR OptionalIndependent left and right axes (Y1,Y2) are controlled by electronic servo valves and electronic linear position controllers. CNC-controlled motorized crowning system homogenizes bending, which forces every point of the bending parts to acquire straight bends. The need for shimming is eliminated.

Pocket-Style Back Gauge FingersADS, ADH & ADSL Standard | ADR OptionalWhen equipped with an optional tapering style back gauge, it is necessary to have finger tips that can properly receive and secure the part when introduced at an angle in the X axis.

3 Step Back Gauge FingersADS, ADH & ADSL Standard | ADR Optional Three step style fingers are used for the X/R and X/R/Z1, Z2 back gauge configurations. Special fingers are also available upon request.

features

X/R Style Back GaugeADS, ADH & ADSL Standard | ADR Optional With the X/R style back gauge, the height of the back gauge is programmable in addition to the depth. This is very useful for changes in die height, extreme crowning settings, and for gauging to a flange that may be a different height than the die.

T = MATERIAL THICKNESSV = V-OPENINGMF = MINIMUM FLANGE LENGTHIR = INSIDE RADIUS

*BASED ON BENDING TO AN INCLUDED ANGLE OF 88 DEGREES. THIS DIMENSION WILL INCREASE WHEN BENDING TO AN INCLUDED ANGLE OF LESS THAN 88. A36 STEEL REQUIRES A SAFETY MULTIPLIER OF 1.33 (80,000 PSI) TO THE CHART.

The bending force (tonnage) figures listed above are based on mild steel with tensile strength of 60,000 PSI. To calculate the approximate bending force requirements for other materials, please use the following multipliers:

Soft Brass Tons Per Foot x 50%Soft Aluminum Tons Per Foot x 50%Heat Treated Aluminum Tons Per Foot x 100%Stainless Steel Tons Per Foot x 150%

controlsADR Series

Delem DA 52 ControlStandard - Graphic viewing not possibleThe compact DA-52 is a complete CNC solution for conventional as well as synchronized press brakes. The panel based control, capable of controlling up to 4 axes, can be integrated in cabinets as well as in an optional pendulant arm housing.

Equipped with the Delem user-friendly user interface, the DA-52 provides all main press brake functionality.

The unique ‘hotkey’ navigation gives direct access to the programs in memory and enables quick and easy programming of a product. All common bend parameters are located on one page. For advanced parameters an additional page can be selected.

Angle programming of the Y-axis, crowning function and pressure control are standard on board. USB interfacing enables the use of memory sticks as a fast product and tool backup medium.

• Quick, one page programming• Hotkey navigation• 6.4” VGA color TFT• Up to 4 axes (Y1, Y2, and 2 auxiliary axes)• Crowning control• Tool/material/product library• USB, peripheral interfacing

Delem DA 56 ControlOptionalThe compact DA-56 provides easy CNC programming with the Delem 2D graphical product design tool. Machine adjustment and test bends are reduced to a minimum because of the quick and easy to use bend sequence determination tool. The CNC program is generated with a one touch key stroke. You are ready to make the first part since all axes positions are automatically computed and the bend sequence has already been simulated on the screen with the machine and tools in real scale. In the production mode of the DA-56 the operator can graphically simulate the bend process of the product guiding him during the press brake operation.The basic machine control functions are Y1-Y2 and X axis, optionally a second back gauge axis can be used as R/Z or X2 axis. Also the crowning function is standard on board.

• 2D graphical programming• 10” TFT color display• Full Windows suite• USB keyboard and mouse interface

Delem DA 66T ControlStandard The DA-66T offers 2D programming that includes automatic bend sequence calculation and collision detection. Full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling.

Programming• 2D graphical touch screen programming mode• 3D visualization in simulation and production• 17” high resolution colour TFT• Full Windows application suite• Delem Modusys compatibility (module scalability and adaptivity)• USB, peripheral interfacing• User specific application support within the controllers multitasking environment• Sensor bending & correction interface

Delem DA 69T ControlOptional The DA-69T offers 2D as well as 3D programming that includes automatic bend sequence calculation and collision detection. Full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling.

Features• 3D and 2D graphical touch screen programming mode• 3D visualization in simulation and• production• 17” high resolution color TFT• Full Windows application suite• Delem Modusys compatibility (module scalability and adaptivity)• USB, peripheral interfacing• User specific application support within the controllers multitasking environment• Sensor bending & correction interface

controlsads series

softwareoffline

Profile TOffline ProgrammingDA-Offline software maximises machine efficiency and production output of press brakes. The Profile T software facilitates offline programming and simulation the bending process. Production preparation, makeability and tooling verification, operator training, adding notes for production and many other functions can be carried out offline. The Profile T software offers advanced programming in 2D/3D in line with the DA-Touch controller software. The steps from the start of programming to the desired program including its transfer to the control are clearly embedded in the user interface. Programming the product graphically shows a true scale representation of the intended product. Realistic product visualisation gives feedback on feasibility, collisions, required tools and tool adapters for production.

• 2D or 3D versions• DXF converter (3D version only)• Full scale offline programming• Graphical product programming and bend sequence generation• Feasibility studies and production preparation• 2D/3D automatic bend sequence calculation• Collision detection• Product sharing over Windows networking with press brake CNC• Machine setup preparation including print functionality• Production time calculation

CadBendThe design of any part in 3D is made simple. Starting from a solid base, the different faces are added to form the complete part. Once the part has been designed, the unfolding is immediate and automatic. The application has a powerful help system with detailed explanations of each one of the options, so that the user may resolve any doubts quickly and simply.

• Dynamic coordinate system specifically designed for boxes• Real time viewing of the part• Powerful 2D design module.• Automatic unfolding with possibility of unfolding in DXF• Creation of the base face from 2D geometry or parameters introduced by the user• Creation of faces at 0º and 180º• Creation of multiple faces from one profile

featuresoptional

SafetyDue to the multiple purpose use of press brakes, point of operation guarding is the responsibility of the machine buyer/user. For this reason we offer the Akas ram mounted “laser” style point of operation guard. The system is based off of the location of the punch tip. Simply by pressing a button the system travels down and finds the safe setting relevant to the punch being used at the time.

Z1, Z2 Independent Finger WidthADS, ADH & ADSLIndependent finger width movements allow gauging of stage or progressive work along the bed and also automatically set according to bend length or part width.

X1, X2 Independent Finger WidthADS, ADH & ADSLAllows gauging of parts requiring a large taper. Fingers are mounted on a common gauge bar.

Six Axis Back GaugeADSIn this configuration (X1/X2 / Z1/Z2 / R1,R2) it can be almost assured the operator will never spend time in the manual adjustment or setup, regardless of part complexity.

optional features

X PrimeADS, ADH & ADSLIndependent ±5” of one finger. An inexpensive solution for tapered parts.

Pneumatic Die Positioning (I Axis)ADS, ADH & ADSLTwo position system allows front to back shuttle from one die position to another. This can be useful in hemming and other special demanding operations.

CNC Controlled Multi-Vee PositioningADS, ADH & ADSLCNC controlled front to back positioning of the Durma multi-vee die. Multiple vee openings may be placed on a single side of the die block, in this case it is possible to program which of the dies you wish to use.

CNC Controlled Sheet FollowersADS, ADH & ADSLReduces operator involvement and dishing of large sheets or panels. Followers support large sheets as they are being bent. A parking station is available on one end of the bed allowing an operator to quickly and easily position the sheet follower units out of the way. The following units adjust easily in height and width via linear guide. Pneumatic height adjustment is available optionally (shown with three).

Laser-Style Angle Measurement SystemADS, ADH & ADSLManufacturing sheet metal parts with properly bending angles that are kept constant at all times often meets a problem during the actual production process: different parameters in material thickness and stresses. The best solution is a laser based bending angle measuring device.

• Any bending angle can be measured. • Very compact, everything in the appliance. • Light influence, light or dark material surfaces play

practically no part.

clamping optionstooling

Durma Laser Hardened ToolingTypically machines 350 tons and over are equipped as standard with an American style punch clamp and a large multi-vee table with five or more v-openings. The opening sizes are dependent on the machine tonnage.

Precision Ground Euro-Style Tool PackageA very flexible and affordable precision ground tooling package is available. It consists of a four way bottom die with .625”/88° - .866”/88° - 1.37”/85° - 1.96”/ 85° openings, a four way die holder, and a 75 degree punch with .030 radius. The longest punch or die is 32”.

Lever-Style Quick Release Punch ClampingA push pull lever eliminates the need for loosening and tightening bolts for punch removal. This style does note allow vertical loading/unloading of tools with safety tang. Available for European style punches and is not self seating.

New Standard StyleThe New Standard concept is also available. This concept is generally a little harder and utilizes the patented “hour glass” tang for self seating.

Hydraulic Die ClampingHydraulic die clamping provides an equally fast method of securing the lower dies. It is available for both American and New Standard style dies.

tooling and clamping options

American Style ToolingBoth precision ground and sectionalized tooling, as well as conventional full length style tooling is available.

Hydraulic Punch ClampingWe offer several styles of hydraulic punch clamping. Each automatically centers and seats the punch and allows vertical removal. Setup times can be dramatically reduced. It is available for American and New Standard style concepts.

Durma Hydraulic Punch ClampingPatented “easy slide” removal of the punch. Built to withstand loads up to 330 tons per foot for demanding jobs with heavy load over short area.

adr seriespress brakes

Value-oriented press brakes with large strokes, daylights, and gaps to allow cost-effective production of simple to complex large shapes that require large dimensions for handling and removal. A simple-to-use control reduces the required operator level.

12 20 25 30 30 30 37 14 30 37 43 30 40 43 40 43 60 60 6060 60 100 100 135 175 175 175 220 220 220 320 320 320 400 400 220 320 400

Bending force U.S. ton 44 66 110 110 150 195 195 195 245 245 245 350 350 350 440 440 245 350 440

Bending length inch 49 80 100 120 120 120 145 168 120 145 168 120 159 168 159 168 240 240 240

Between columns inch 41 67 86 102 102 102 122 146 102 122 146 102 141 146 134 146 200 200 200

Daylight inch 15.7 15.7 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 25 25 25 25 25 20.8 25 25

Stroke inch 6.3 6.3 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 14 14 14 14 10.4 14 14

Throat depth inch 14 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 16 16 20

X Axis Travel inch 19.7 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 29.5 29.5 29.5 29.5 29.5

R Axis

Weight (approx) pounds 6,820 12,897 19,070 20,393 22,597 24,802 28,600 29,842 27,007 31,592 32,518 38,030 45,746 47,643 58,974 59,873 45,393 62,281 78,815

optional optional

12 20 25 30 30 30 37 14 30 37 43 30 40 43 40 43 60 60 6060 60 100 100 135 175 175 175 220 220 220 320 320 320 400 400 220 320 400

Bending force U.S. ton 44 66 110 110 150 195 195 195 245 245 245 350 350 350 440 440 245 350 440

Bending length inch 49 80 100 120 120 120 145 168 120 145 168 120 159 168 159 168 240 240 240

Between columns inch 41 67 86 102 102 102 122 146 102 122 146 102 141 146 134 146 200 200 200

Daylight inch 15.7 15.7 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 25 25 25 25 25 20.8 25 25

Stroke inch 6.3 6.3 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 14 14 14 14 10.4 14 14

Throat depth inch 14 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 16 16 20

X Axis Travel inch 19.7 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 29.5 29.5 29.5 29.5 29.5

R Axis

Weight (approx) pounds 6,820 12,897 19,070 20,393 22,597 24,802 28,600 29,842 27,007 31,592 32,518 38,030 45,746 47,643 58,974 59,873 45,393 62,281 78,815

optional optional

12 20 25 30 30 30 37 14 30 37 43 30 40 43 40 43 60 60 6060 60 100 100 135 175 175 175 220 220 220 320 320 320 400 400 220 320 400

Bending force U.S. ton 44 66 110 110 150 195 195 195 245 245 245 350 350 350 440 440 245 350 440

Bending length inch 49 80 100 120 120 120 145 168 120 145 168 120 159 168 159 168 240 240 240

Between columns inch 41 67 86 102 102 102 122 146 102 122 146 102 141 146 134 146 200 200 200

Daylight inch 15.7 15.7 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 25 25 25 25 25 20.8 25 25

Stroke inch 6.3 6.3 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 14 14 14 14 10.4 14 14

Throat depth inch 14 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 16 16 20

X Axis Travel inch 19.7 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 29.5 29.5 29.5 29.5 29.5

R Axis

Weight (approx) pounds 6,820 12,897 19,070 20,393 22,597 24,802 28,600 29,842 27,007 31,592 32,518 38,030 45,746 47,643 58,974 59,873 45,393 62,281 78,815

optional optional

adS seriespress brakes

Unlimited possibilities and features provide faster and quicker setups. A wide assortment of material handling accessories and back gauge configurations allow the ADS to cost-effectively produce the most demanding parts.

12 20 25 30 30 30 30 30 37 37 43 40 40 43 40 43 40 60 60 6060 60 100 100 135 175 220 320 175 220 175 175 220 220 320 320 400 220 320 400

Tons US Tons 44 66 110 110 150 195 245 350 195 245 195 195 245 245 350 350 440 245 350 440

Bend Length inch 49 81 100 120 120 120 120 120 145 145 168 159 159 168 159 168 159 238 238 238

Between Columns inch 41 67 86 102 102 102 102 102 122 122 146 141 141 146 141 146 141 200 200 200

Open height (bed to ram) inch 15.7 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 25 25 25 28 20.8 25

Stroke (Std/Opt) inch 6.3 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 16 10.4 10.4 16 14 16 14 14 10.4 14

Throat Depth inch 14 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 16 20

X Axis Travel inch 20 26 26 26 26 26 26 26 26 26 25 26 26 30 26 50 30 30 30 30

R-Axis Travel inch 6 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

Z Axis

Approx Weight lbs 7,250 13,448 19,621 20,944 23,149 25,353 27,558 25,353 28,660 31,658 29,842 28,881 33,069 32,518 46,297 47,643 59,524 89,287 45,944 79,366

optional optional

12 20 25 30 30 30 30 30 37 37 43 40 40 43 40 43 40 60 60 6060 60 100 100 135 175 220 320 175 220 175 175 220 220 320 320 400 220 320 400

Tons US Tons 44 66 110 110 150 195 245 350 195 245 195 195 245 245 350 350 440 245 350 440

Bend Length inch 49 81 100 120 120 120 120 120 145 145 168 159 159 168 159 168 159 238 238 238

Between Columns inch 41 67 86 102 102 102 102 102 122 122 146 141 141 146 141 146 141 200 200 200

Open height (bed to ram) inch 15.7 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 25 25 25 28 20.8 25

Stroke (Std/Opt) inch 6.3 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 16 10.4 10.4 16 14 16 14 14 10.4 14

Throat Depth inch 14 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 16 20

X Axis Travel inch 20 26 26 26 26 26 26 26 26 26 25 26 26 30 26 50 30 30 30 30

R-Axis Travel inch 6 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

Z Axis

Approx Weight lbs 7,250 13,448 19,621 20,944 23,149 25,353 27,558 25,353 28,660 31,658 29,842 28,881 33,069 32,518 46,297 47,643 59,524 89,287 45,944 79,366

optional optional

12 20 25 30 30 30 30 30 37 37 43 40 40 43 40 43 40 60 60 6060 60 100 100 135 175 220 320 175 220 175 175 220 220 320 320 400 220 320 400

Tons US Tons 44 66 110 110 150 195 245 350 195 245 195 195 245 245 350 350 440 245 350 440

Bend Length inch 49 81 100 120 120 120 120 120 145 145 168 159 159 168 159 168 159 238 238 238

Between Columns inch 41 67 86 102 102 102 102 102 122 122 146 141 141 146 141 146 141 200 200 200

Open height (bed to ram) inch 15.7 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 25 25 25 28 20.8 25

Stroke (Std/Opt) inch 6.3 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 16 10.4 10.4 16 14 16 14 14 10.4 14

Throat Depth inch 14 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 16 20

X Axis Travel inch 20 26 26 26 26 26 26 26 26 26 25 26 26 30 26 50 30 30 30 30

R-Axis Travel inch 6 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

Z Axis

Approx Weight lbs 7,250 13,448 19,621 20,944 23,149 25,353 27,558 25,353 28,660 31,658 29,842 28,881 33,069 32,518 46,297 47,643 59,524 89,287 45,944 79,366

optional optional

adH seriespress brakes

The AD-H press brakes utilize an electro/hydraulic ram positioning system. Parts are produced quietly, quickly, and efficiently.

25 30 30 30100 100 135 175

Tons US Tons 112 112 151 196

Bend Length inch 100 120 120 120

Between Columns inch 86 102 102 102

Open Ht(bed to ram) inch 21 / 25 21 / 25 21 / 25 21 / 25

Stroke (Std/Opt) inch 10 / 14 10 / 14 10.4 10 / 14

Throat Depth inch 16 16 16 16

X Axis Travel inch 26 26 26 26

R-Axis Travel inch 10 10 10 10

Z Axis

Approx Weight lbs 19,621 20,944 23,149 25,353

optional

electro/hydraulic drive

Electro Hydraulic OperationIn the simple electro/hydraulic drive system the ram movement is powered by AC servo motors driving hydraulic oil in line with a variable speed pump. This new technology provides:

• Energy Savings: • 62% During Idle• 44% During Cycle

• Lower Per Part Cost• Noise Level Reduction 76dba to 63dba • Increased Ram Speeds (up to 472 IPM) • Better Accuracy • 60% Reduced Oil Requirements • Five Times Better Y1, Y2 Synchronization at High Speed

RoboticsOptional Robotic tendered press brakes are available and can be sized and fixed per application.

Specifications Conventional Press Brakes SvP Press Brakes

Motor Power (HP) 20 2 x 5Hydraulic Oil Capacity (gallons) 53 2 x 11Noise Level (dB(A)) 76 63Total Energy per Cycle (kWh) 0.034 0.019Standby Power (kw/hr) 1.85 0.7Rapid Approach Speed (ipm) 230 to 280 472Return Speed Beam (ipm) 210 250 425

featuresADH

press brakeslarge format

Dump Truck ProductionTandem AD-S 80800 (26’ x 880 tons) and AD-S 40400 (13’ x 440 tons).

Leading European Steel SupplierAD-S 101500 (34’ X 1,650 tons)

For more information, please request our complete ADSL Press Brake catalog.

Vacuum Lift

on Track

Sheet Trolley

Pole ManufacturerAD-S 701000 Tandem (23’ x 1,100 Ton x 2)

Construction Equipment ManufacturerAD-S 551250 (18’ x 1,275 tons).

Defense ContractorADS 702000 (23’ x 1,100)

Road Barrier IndustryADS 62800 (20’ x 880 Tons)