pretreat solutions process · load bucket with microfiber mops or pads. load mops and pads with the...
TRANSCRIPT
Pretreat Solutions Process
Turn bucket over and remove lid. Install Mop to Mop Frame or Pad to Pad Frame.
Install Mop or Pad
Clean floors using the Mop Clean; clean other flat cleanable surfaces (such as mirrors, partitions, windows, etc.) using the Pad.
Floors and Walls
Flip buckets over and allow to sit for 15 minutes.
Turn Buckets
Load Bucket with microfiber Mops or Pads. Load Mops and Pads with the microfiber side down. The top Mop or Pad should be loaded with microfiber side up to prevent splashing.
Load Buckets
Pour solution slowly and evenly over the Mops or Pads.
Seal Bucket with lids; ensure that all corners are tight and properly sealed.
Add Solution / Seal Buckets
Measure the recommended amount of solution (please refer to the chart below right for recommended dilution).
Solution
CLOTHS 12” x 12” CLOTHS 16” x 16” 10” LOOP PADS 10” WHITE PADS 3.5 GALLON BUCKET
15 10 .10 gallons / .38 liters
20 10 10 15 .20 gallons / .75 liters
30 15 15 20 .30 gallons / 1.2 liters
40 20 20 30 .40 gallons / 1.5 liters
50 25 25 35 .60 gallons / 2.25 liters
60 30 30 40 .75 gallons / 2.8 liters
70 35 35 45 .85 gallons / 3.2 liters
LOOP MOPS 6 GALLON BUCKET
6 .37 gallons / 1.4 liters
9 .50 gallons / 1.9 liters
12 .75 gallons / 2.8 liters
18 1.0 gallons / 3.8 liters
21 1.25 gallons / 4.7 liters
24 1.50 gallons / 5.6 liters