price guide april 2013
DESCRIPTION
http://www.uponor.co.uk/~/media/countryspecific/uk/download-centre/pricelist/price-guide-april--2013.pdf?version=1TRANSCRIPT
2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Uponor Limited provides plumbing and heating systems for all building types, from one bedroom flats to large public buildings.
We offer real solutions for both underfloor and radiator heating systems, including intelligent controls. We are at the forefront of heating innovation, providing a complete comfort experience to all our users.
Our facility at Lutterworth has seen rapid expansion and houses the UK‘s largest, professionally qualified, technical team in the heating solutions industry.
Our level of expertise is regularly called upon as a reference point by the professions, third-party manufacturers and users alike. Indeed our slogan ‘no sales without support’ shows our dedication to always inaugurate support before a project begins. On a practical level we appreciate our products are only as good as the technician who installs them. This is why in 2004 we opened our own dedicated training academy which allows our customers to learn about the theoretical aspects of underfloor heating; putting this knowledge into practice in our training suite, giving the best results to the end user.
Uponor: more than products.
Renewable Energy Systems
Complete solutions for a sustainable home:Uponor provide the fundamental systems for ideal home comfort, combined with the most efficient use of energy. Our aim is to enrich people’s way of life and offer comprehensive plumbing, heating and energy solutions.
Transferring energy from A to B without losing oC
Pre Insulated Pipes
Collector Pipes
Extracting energy from the ground
Hot & Cold Tapwater
A safe secure water distribution system
Manifold Plumbing Systems
Radiator Connection
The benefits of manifold plumbing for radiator
connection
Dynamic Energy Control
Unique, innovative heating controls, up to 12%
energy savings
Underfloor Heating & Cooling Systems
Underfloor Heating & Cooling
Energy efficient heating - a sustainable home...
3e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
In industrial and commercial settings, reduction of heating costs is highly dependent on making optimal use of surface area and space. Therefore, an intelligent heating solution has to cope with budget restrictions. In addition, static and dynamic stress caused by machinery, vehicles and shelves,
imposes extra requirements that any kind of infrastructural solution has to meet. With all their advantages, commercial solutions by Uponor are the most worthwhile system.
Invisible Comfort: Indoor ClimateWe offer a broad variety of radiant heating and cooling solutions, providing maximum comfort for the user, high energy efficiency and best possibilities for taking advantage of environmentally sound renewable energies.
Reliability and Premium Quality: Plumbing SolutionsWe offer plumbing systems that are corrosion-resistant, hygienic and flexible, providing the construction industry with fast and efficient installation technologies and the end user with long lasting, healthy and trouble free solutions. Our pre-insulated piping systems offer an efficient performance solutions for local energy and water distribution.
Renewable and Energy SolutionsThere is increasing interest in these environmentally friendly systems due to the potential for low running costs, reduction in use of fossil fuels, and the reduction in CO2 emissions. Uponor offers energy management for renewable application when it comes to heating. Be it homes, offices, schools or any industrial site, we offer solutions which are innovating.
Uponor Commercial solutions - making economical use of surface area and space
C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m4
Flexible Plumbing & Radiator Heating
Pre-Insulated Pipe System
With over 25 million metres installed worldwide, Uponor Pre-insulated pipe is the proven choice for energy efficient transportation of hot water for heating and tap water applications, saving you money on installation and running costs.
Underfloor Heating
Supplying a broad variety of radiant heating and cooling solutions for Domestic and Commercial UFH systems. Providing maximum comfort for the user, high energy-efficiency, and the best possibilities for taking advantage of environmentally sound renewable energies.
We offer plumbing solutions that are corrosion resistant, hygienic, and flexible. Providing the construction industry with fast and efficient installation technologies, giving the end-users a long-lasting, healthy and trouble-free solution.
5e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
ContentsUponor Overview ...................................................................... 2
Uponor Loyalty Scheme - uPoints ............................................ 6
Flexible Plumbing & Radiator Heating .......................... 7
Multi-Layer Composite Pipe (MLCP) ......................... 8
RTM Fitting ................................................................... 10
Modular System ........................................................... 22
Q&E PEX Plumbing System ....................................... 32
Pre-Insulated Pipe .......................................................... 45
Underfloor Heating ........................................................ 59
Uponor One Pack Range ............................................... 60
Uponor Self Attaching System ....................................... 64
Screed Floor Systems ..................................................... 67
Timber Floor Systems .................................................... 70
Floating Floor Systems .................................................. 71
Floating Floor Systems - System 12 ............................... 72
PEX 20 Systems ........................................................... 79
Underfloor Heating Controls ......................................... 87
Energy Systems (Collector Pipe for GSHPs) ............. 101
Tools and Accessories .................................................. 107
Plumbing Tools ............................................................ 108
Underfloor Heating Tools ............................................. 114
Uponor Training ............................................................ 118
Uponor - Conditions of Sale ................................................. 119
6 6
Look out for uPoint values in the product description throughout this price guide
Exclusively for Uponor installers – collect uPoints and get rewarded!You have put your trust in us and our products. Now we would like to thank you
– with our new reward programme Uponor & more.
Collect uPoints when buying Uponor products and exchange them for rewards
from a selection of over 1,500 specially chosen gifts.
Some examples of our most popular rewards:
1. RegisterRegister to join the programme and enjoy the many advantages of Uponor & more!
2. Collect uPointsuPoint vouchers are enclosed in many key Uponor products. Just enter the unique voucher code number in the Uponor & more portal at www.uponor-more.com and fill up your uPoint account.
It’s so easy: www.uponor-more.com
3. Choose rewardsNow for the best part of the Uponor & more programme. Once you have collected enough uPoints, simply exchange them for fantastic rewards! Enjoy!
It’s so easy: www.uponor-more.com It’s so easy: www.uponor-more.com
Philips LED television
Uponor press tool
Uponor hooded jacket
e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 7
Flexible Plumbing & Radiator Heating
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ng
We offer plumbing solutions that are corrosion resistant, hygienic, and flexible. Providing the construction industry with fast and efficient installation technologies, giving the end-users a long-lasting, healthy and trouble-free solution.
• MLCP Plumbing Pipes 8
• RTM Fitting 10
• MLCP Plastic Press Fittings 14
• MLCP Metal Press Fittings 16
• Modular System 22
• MLCP Manifold, Adapters & Accessories 25
• MLCP Radiator & Tapwater Terminations 28
• Q&E PEX Plumbing System 32
8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
MLCP white, supplied in straight lengths
Description Code Qty Price per/m
3m lengths
16x2mm 1013436 75m
20x2.25mm 1013441 51m
25x2.5mm 1013443 30m
32x3mm 1013445 18m
5m lengths
16x2mm 1013432 125m
20x2.25mm 1013438 85m
25x2.5mm 1013442 50m
32x3mm 1013444 30m
40x4mm 1013446 20m
50x4.5mm 1013449 20m
63x6mm 1013451 15m
75x7.5mm 1013453 5m
90x8.5mm 1013455 5m
110x10mm 1013457 5m
100% diffusion-resistant multi-layer composite (MLCP) pipe, five-layer (PE-RT – adhesive agent – continuously safety welded aluminium – adhesive agent – PE-RT), for general plumbing and radiator-connection applications, and also for distribution mains and risers. Manufactured to ISO 21003: 2008 for hot and cold water and heating applications with full WRAS approval.
Uponor MLCP Plumbing Pipes
Flexible Plumbing & Radiator Heating
MLCP white, supplied in coils100% diffusion-resistant multi-layer composite (MLCP) pipe, five-layer (PE-RT – adhesiveagent – continuously safety welded aluminium – adhesive agent – PE-RT), for general plumbingand radiator-connection applications, and also for distribution mains and risers. Manufactured to ISO 21003: 2008 for hot and cold water and heating applications with full WRAS approval.
Flexible Plum
bing & R
adiator Heating
Description uPoints Code Qty Price per/m
12x1.6mm 1013575 100m
16x2mm 250 1013463 50m
16x2mm 350 1013377 75m
16x2mm 500 1013378 100m
16x2mm 500 1013559 120m
16x2mm 900 1013371 200m
16x2mm 2500 1013380 500m
20x2.25mm 700 1013388 100m
20x2.25mm 1500 1013392 200m
25x2.5mm 800 1013398 50m
25x2.5mm 1500 1013400 100m
32x3mm 1000 1013401 50m
2.31
3.81
5.56
7.07
2.31
3.81
5.65
7.07
11.62
17.34
28.03
43.89
64.89
93.36
1.61
1.96
1.96
1.96
1.96
1.96
1.96
3.06
3.06
4.84
4.84
6.96
9e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Uponor MLCP Plumbing Pipes
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ng
MLCP-in-Pipe
Description uPoints Code Qty Price per/m
16x2mm - Blue 500 1013675 75m
20x2.25mm - Blue 800 1013677 75m
16x2mm - Red 500 1013679 75m
20x2.25mm - Red 800 1013681 75m
MLCP in corrugated protective tube made of high-density polyethylene. Supplied in coils. Available in red and blue.
MLCP conduit
Description Code Qty Price per/m
16 Black (12mm) 1012857 50m
20 Red (16mm) 1012858 50m
20 Blue (16mm) 1012859 50m
20 Black (16mm) 1012860 50m
23 Red (20mm) 1012862 50m
23 Blue (20mm) 1012863 50m
23 Black (20mm) 1012864 50m
29 Red (25mm) 1012866 50m
29 Blue (25mm) 1012867 50m
29 Black (25mm) 1012869 50m
36 Black (32mm) 1012872 25m
Made of high-density polyethylene. Available in red, blue or black. Supplied in coils. Details and prices of a wide range of other sizes of conduit are available on request. First number shown in description refers to I.D. of the protective tube. The second is the size of MLCP suitable. N.B. Does not include MLCP.
MLCP Tubolit S 9mmMLCP encased in 9mm insulation. Supplied in coils. Round-extruded pipe insulation made of polyethylene foam with closed-cell material structure. WLG 040. - Fire-resistance class B2, conforming to DIN 4102. - Insulation thickness 9mm, for cold-water conduits conforming to DIN 1988 (part2), and heating system conduits conforming to EnEV. - Additional continuous impact sound insulation required.
Description uPoints Code Qty Price per/m
16x2mm 700 1013625 75m
20x2.25mm 900 1013626 75m
25x2.5mm 1050 1013627 50m
MLCP Tubolit S-50 13mmMLCP encased in 13mm insulation. Supplied in coils. Concentrically-extruded pipe insulation made of polyethylene foam with closed-cell material structure.- Fire-resistance class B2, conforming to DIN 4102- Insulation thickness 13mm, for cold-water conduits conforming to DIN 1988 (part 2), and heating system conduits conforming to 50% insulation requirement.- Additional continuous impact sound insulation required.
Description uPoints Code Qty Price per/m
16x2mm 800 1013628 75m
20x2.25mm 1000 1013629 75m
25x2.5mm 1100 1013630 50m
3.64
5.46
3.64
5.46
0.82
0.91
0.91
0.91
1.15
1.15
1.15
1.68
1.68
1.68
1.97
3.53
4.70
6.15
3.73
5.19
6.68
1 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Uponor Ring Tension Memory Fittings:
16 20 25 32Colour coded diameters
Uponor’s RTMTM Technology:
Ring Tension Memory with the Tool-Inside
concept, ideal for refurbishment and
new buildings, allowing safe, quick and
professional joints, thanks to the Joint
Indicator and no tool dependence. RTMTM
Technology works perfectly with Uponor’s
MLCP pipes.
Technology
Ring Tension Memory Technology
It is easy to install due to its revolutionary RTMTM Technology,
a technology that has allowed Uponor to incorporate the Tool-Inside:
The Ring with Tension Memory. This revolutionary RTMTM Technology
creates constant pressure ensuring perfect and long lasting joints.
RTM Coupling
Description Code Qty Price each
16mm PPSU 1048542 10
20mm PPSU 1048543 10
25mm PPSU 1048544 5
32mm Brass 1048572 5
RTM Reducer
Description Code Qty Price each
20mmx16mm PPSU 1048545 10
25mmx20mm PPSU 1048546 5
25mmx16mm Brass 1048573 5
32mmx25mm Brass 1048574 5
Flexible Plum
bing & R
adiator Heating
3.74
4.72
7.25
18.25
4.41
6.52
8.46
14.92
1 1e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Uponor RTM Fittings
RTM Elbow
Description Code Qty Price each
16mm PPSU 1048547 10
20mm PPSU 1048548 10
25mm PPSU 1048549 5
32mm Brass 1048575 5
RTM Female Elbow
Description Code Qty Price each
16mmx½” FT (PPSU) 1048561 10
16mmx½” FT (Brass) 1048590 10
20mmx½” FT (PPSU) 1048562 10
20mmx½” FT (Brass) 1048591 10
20mmx¾” FT (Brass) 1048592 10
25mmx¾” FT (PPSU) 1048563 5
25mmx¾” FT (Brass) 1048593 5
25mmx1” FT (Brass) 1048594 5
32mmx1” FT (Brass) 1048595 5
RTM Male Elbow (Brass)
Description Code Qty Price each
16mmx½” MT 1048599 10
20mmx½” MT 1048600 10
20mmx¾” MT 1048601 10
20mmx¾” MT 1048602 5
RTM Wall Plate Elbow
Description Code Qty Price each
16mmx½” FT PPSU 1048564 10
20mmx½” FT PPSU 1048565 5
20mmx¾” FT Brass 1048598 5
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ng
3.81
5.14
8.64
22.36
6.70
7.86
8.22
9.91
10.58
11.48
14.49
15.34
22.96
7.86
8.77
14.02
8.22
9.65
11.96
14.50
1 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Uponor RTM Fittings
RTM Equal Tee
Description Code Qty Price each
16mm PPSU 1048550 10
20mm PPSU 1048551 10
25mm PPSU 1048552 5
32mm Brass 1048576 5
RTM Reduced Tee
Description Code Qty Price each
20mmx16mmx20mm PPSU 1048553 10
20mmx16mmx16mm PPSU 1048554 10
25mmx20mmx16mm PPSU 1048555 10
25mmx16mmx25mm Brass 1048577 5
25mmx20mmx20mm PPSU 1048557 5
32mmx20mmx25mm PPSU 1048556 5
32mmx25mmx25mm Brass 1048578 5
32mmx25mmx32mm Brass 1048579 5
32mmx20mmx32mm Brass 1048580 5
RTM Female Tee (Brass)
Description Code Qty Price each
16x½” FTx16mm 1048587 10
20x½” FTx20mm 1048588 10
20x¾” FTx20mm 1048589 10
RTM Female Adapter
Description Code Qty Price each
16x½ FT (PPSU) 1048558 10
16x½” FT (Brass) 1048581 10
20x½” FT (PPSU) 1048559 10
20x½” FT (Brass) 1048582 10
20x¾” FT (Brass) 1048583 10
25x½” FT (PPSU) 1048560 5
25x¾” FT (Brass) 1048584 5
25x1” FT (Brass) 1048585 5
32x1” FT (Brass) 1048586 5
Flexible Plum
bing & R
adiator Heating
4.81
7.55
12.38
32.75
7.25
7.25
7.25
16.74
10.88
11.48
25.88
29.50
28.22
6.65
8.15
7.61
9.19
10.27
9.55
12.69
14.50
20.55
12.69
14.81
16.61
1 3e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ngUponor RTM Fittings
RTM Flexible Tap Connector (300mm)
Description Code Qty Price each
16x½” FT 1057364 10
20x¾” FT 1057365 10
RTM Male Adapter
Description Code Qty Price each
16x½” MT (PPSU) 1048539 10
16x½” MT (Brass) 1048566 10
20x½” MT (PPSU) 1048540 10
20x½” MT (Brass) 1048567 10
20x¾” MT (Brass) 1048568 10
25x¾” MT (PPSU) 1048541 5
25x¾” MT (Brass) 1048569 5
25x1” MT (Brass) 1048570 5
32x1” MT (Brass) 1048571 5
RTM Copper Adapter
Description Code Qty Price each
16/15mm 1048603 10
25/22 1057377 5
32/28 1057378 5
RTM Radiator Connection Elbow
Description Code Qty Price each
16/200mm 1057379
Radiator Connection elbow with 15mm plated copper spigot.
RTM Swivel Nut Union
Description Code Qty Price each
16x½” FT 1057375 10
20x¾” FT 1057376 10
RTM Calibrator Tool
Description Code Qty Price each
16/20/25mm 1048606 1
32mm 1048607 1
4.72
7.13
5.68
8.45
9.37
8.22
12.08
14.02
16.92
11.48
15.11
5.68
8.99
16.39
16.92
1.81
3.02
10.05
12.16
1 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Uponor MLCP Plastic Press Fittings
Composite coupling/reducer
Description Code Qty Price each
16x16mm 1022736 10
20x16mm 1022740 10
20x20mm 1022737 10
25x16mm 1022741 5
25x20mm 1022742 5
25x25mm 1022738 5
32x25mm 1022743 5
32x32mm 1022739 5
40x40mm 1046401 5
50x50mm 1046402 3
40x25mm 1046403 5
40x32mm 1046404 5
50x32mm 1046405 3
50x40mm 1046406 3
Made of PPSU, with press sleeve.
Composite elbow 90°
Description Code Qty Price each
16x16mm 1022714 10
20x20mm 1022715 10
25x25mm 1022716 5
32x32mm 1022717 5
40x40mm 1046386 5
50x50mm 1046387 3
Made of PPSU, with press sleeve.
Composite elbow 45°
Description Code Qty Price each
40x40mm 1046388 5
50x50mm 1046389 3
Made of PPSU, with press sleeve.Flexible P
lumbing &
Radiator H
eating
2.75
3.35
3.69
5.22
5.37
5.66
8.88
9.25
14.84
18.98
13.65
15.42
18.40
19.58
3.45
4.31
6.10
9.49
17.21
25.51
28.47
37.96
1 5e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Uponor MLCP Plastic Press Fittings
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ng
Composite tee
Description Code Qty Price each
16x16x16mm 1022718 10
20x20x20mm 1022719 10
25x25x25mm 1022720 5
32x32x32mm 1022721 5
40x40x40mm 1046390 5
50x50x50mm 1046391 3
Made of PPSU, with press sleeve.
Composite tee with reducer
Description Code Qty Price each
A B C
16x20x16mm 1022722 10
20x16x16mm 1022723 10
20x16x20mm 1022724 10
20x20x16mm 1022725 10
20x25x20mm 1022726 10
25x16x16mm 1022727 5
25x16x20mm 1022728 5
25x16x25mm 1022729 5
25x20x20mm 1022730 5
25x20x25mm 1022731 5
32x16x32mm 1022732 5
32x20x32mm 1022733 5
32x25x25mm 1022734 5
32x25x32mm 1022735 5
40x20x40mm 1046392 5
40x25x32mm 1046393 5
40x25x40mm 1046394 5
40x32x32mm 1046395 5
40x32x40mm 1046396 5
50x25x40mm 1046397 3
50x25x50mm 1046398 3
50x32x50mm 1046399 3
Made of PPSU, with press sleeve.
AB
C
4.67
6.99
11.91
18.94
26.10
39.15
6.49
6.49
6.49
6.49
11.25
7.84
9.87
9.06
8.43
10.62
13.68
16.60
16.67
16.93
20.28
21.95
21.95
21.36
23.14
27.04
29.08
32.63
1 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Uponor MLCP Metal Press Fittings
Flexible Plum
bing & R
adiator Heating
Press connection with female thread
Description Code Qty Price each
16x½” FT 1014536 10
20x½” FT 1014574 10
20x¾” FT 1014577 10
20x1” FT 1014580 10
25x¾” FT 1014599 5
25x1” FT 1014602 5
32x1” FT 1014618 5
32x1¼” FT 1014621 5
40x1¼” FT 1046903 5
40x1½” FT 1046904 5
50x1½” FT 1046907 3
Made of plated brass, with press sleeve. With BSP female-threaded adapter for screw connections.
Press connection with female thread (swivel nut)
Description Code Qty Price each
16x½” FT 1015270 10
16x¾” FT 1015274 10
20x½” FT 1015283 10
20x¾” FT 1015286 10
25x1” FT 1015297 5
32x1¼” FT 1015301 5
40x1½“ FT 1046937 5
50x1¾” FT 1046938 3
50x2” FT 1046939 3
Made of plated brass, with press sleeve and flat sealing washer. Detachable BSP screw fitting forsurface-mounted connection of valve assemblies, filters and shutoff taps.
Press connection with male thread
Description Code Qty Price each
16x½” MT 1014525 10
16x¾” MT 1014534 10
20x½” MT 1014561 10
20x¾” MT 1014564 10
20x1” MT 1014567 10
25x¾” MT 1014589 5
25x1” MT 1014592 5
32x1” MT 1014610 5
32x1¼” MT 1014613 5
40x1¼” MT 1046901 5
40x1½” MT 1046902 5
50x1½” MT 1046905 3
50x2” MT 1046906 3
Made of plated brass, with press sleeve. With BSP male-threaded adapter for screw connections.
4.79
5.13
6.63
10.74
7.15
12.63
13.20
19.60
18.75
20.30
22.61
9.52
10.30
11.07
11.67
12.46
20.83
26.72
28.75
33.44
3.88
7.66
4.83
5.83
8.51
7.35
9.57
10.88
17.11
17.67
23..05
25.12
40.68
1 7e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Uponor MLCP Metal Press Fittings
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ng
Press elbow 90° with male thread
Description Code Qty Price each
16x½” MT 1014686 10
20x½” MT 1014729 10
20x¾” MT 1014732 10
25x¾” MT 1014751 5
25x1” MT 1014755 5
32x1” MT 1014770 5
40x1¼” MT 1046909 5
Made of plated brass, with fixed press sleeve. With BSP male-threaded adapter for screw connections.
Press elbow 90° with female thread
Description Code Qty Price each
16x½” FT 1014692 10
20x½” FT 1014736 10
20x¾” FT 1014739 10
25x¾” FT 1014757 5
25x1” FT 1014761 5
32x1” FT 1014774 5
40x1½” FT 1046910 5
50x1½” FT 1046912 3
Made of plated brass, with fixed press sleeve. With BSP female-threaded adapter for screw connections.
Press connection Union
Description Code Qty Price each
25x25 1059405 8
32x32 1059406 5
40x40 1059407 4
50x50 1059408 4
Made of plated brass, with flat faced washer seal. Demountable fixing point fitting for ancillary products.
NEW
17.97
23.25
37.65
44.94
5.37
8.15
8.54
11.00
11.85
15.98
25.59
5.72
7.53
9.18
11.16
12.37
16.79
23.97
27.79
1 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Uponor MLCP Metal Press Fittings
Press coupling/reducer
Description Code Qty Price each
12x12mm 1015152 10
16x12mm 1015159 10
16x16mm 1015164 10
20x16mm 1015179 10
20x20mm 1015187 10
25x16mm 1015194 5
25x20mm 1015202 5
25x25mm 1015205 5
32x20mm 1015215 5
32x25mm 1015217 5
32x32mm 1015219 5
40x25mm 1046930 5
40x32mm 1046931 5
40x40mm 1046932 5
50x32mm 1046933 3
50x40mm 1046934 3
50x50mm 1046935 3
Made of plated brass, with press sleeve.
Press tee
Description Code Qty Price each
12x12x12mm 1014871 10
16x16x16mm 1014918 10
20x20x20mm 1014976 10
25x25x25mm 1015028 5
32x32x32mm 1015073 5
40x40x40mm 1046921 5
50x50x50mm 1046928 3
Made of plated brass, with press sleeve.
Flexible Plum
bing & R
adiator Heating
Press elbow 90°
Description Code Qty Price each
12x12mm 1014648 10
16x16mm 1014679 10
20x20mm 1014724 10
25x25mm 1014746 5
32x32mm 1014765 5
40x40mm 1046908 5
50x50mm 1046911 3
Made of plated brass, with press sleeve.
5.30
5.45
4.55
5.59
6.09
7.33
7.89
9.11
12.37
13.71
13.71
17.03
19.89
18.56
23.70
25.04
25.08
6.13
6.80
9.80
14.97
28.64
32.34
47.39
4.79
4.83
6.54
10.56
15.42
22.49
32.97
1 9e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Uponor MLCP Metal Press Fittings
Press tee with reducer
Description Code Qty Price each
A B C
16x12x12mm 1014909 10
16x12x16mm 1014910 10
16x20x16mm 1014923 10
20x16x16mm 1014957 10
20x16x20mm 1014961 10
20x20x16mm 1014970 10
20x25x16mm 1014981 10
20x25x20mm 1014983 10
25x12x25mm 1014994 10
25x16x16mm 1014996 5
25x16x20mm 1015000 5
25x16x25mm 1015002 5
25x20x16mm 1015015 5
25x20x20mm 1015017 5
25x20x25mm 1015021 5
25x32x25mm 1015033 5
32x16x32mm 1015053 5
32x20x32mm 1015060 5
32x25x25mm 1015064 5
32x25x32mm 1015068 5
32x50x32mm 1046915 5
40x20x40mm 1046916 5
40x25x32mm 1046917 5
40x25x40mm 1046918 5
40x32x32mm 1046919 5
40x32x40mm 1046920 5
50x25x40mm 1046924 3
50x25x50mm 1046925 3
50x32x50mm 1046926 3
50x40x50mm 1046927 3
Made of plated brass, with press sleeve.
Press elbow 45°
Description Code Qty Price each
25x25mm 1014812 5
32x32mm 1014825 5
40x40mm 1046913 5
50x50mm 1046914 3
Made of plated brass, with press sleeve.
A
B
C
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ng
7.43
7.80
11.12
10.47
10.66
10.66
13.16
13.35
12.18
11.43
11.60
12.96
11.75
12.27
13.45
19.24
17.11
18.23
18.93
20.27
42.57
23.54
26.83
26.32
25.83
28.47
30.46
30.46
37.38
32.80
19.44
23.17
42.74
42.74
2 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Uponor MLCP Metal Press Fittings
Flexible Plum
bing & R
adiator Heating
Repair coupling
Description Code Qty Price each
25x25mm 1015212 5
32x32mm 1015226 5
40x40mm 1015239 5
Repair and compensation coupling, made of plated brass, with elongated press sleeve.
Press tee with male thread
Description Code Qty Price each
A B C
16x½” MTx16mm 1014927 10
25x¾” MTx25mm 1015038 5
32x¾” MTx32mm 1015082 5
Made of plated brass, with press sleeve. Central BSP male-threaded adapter for screw connections.
Press tee with female thread
Description Code Qty Price each
A B C
16x½” FTx16mm 1014931 10
20x½” FTx20mm 1014987 10
20x¾” FTx20mm 1014991 10
25x½” FTx25mm 1015044 5
25x¾” FTx25mm 1015048 5
32x½” FTx32mm 1015088 5
32x¾” FTx32mm 1015091 5
40x¾” FTx40mm 1046923 5
50x1” FTx50mm 1046929 3
Made of plated brass, with press sleeve. Central BSP female-threaded adapter for screwconnections.
Press Stop End
Description Code Qty Price each
16mm 1007078 10
20mm 1007079 10
25mm 1007080 5
32mm 1007081 5
AB
C
B
C
A
36.22
41.95
45.87
10.68
20.40
25.18
13.54
15.39
16.25
17.36
18.72
20.85
23.56
25.80
31.30
3.16
3.46
4.04
8.06
2 1e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Uponor MLCP Pressure Test Plug
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ng
Pressure Test Plug
Description Code Qty Price each
12mm 1013752 10
16mm 1013756 10
20mm 1013760 10
25mm 1013762 10
32mm 1013764 5
40mm 1013765 2
Reusable plug with ½“ FT designed for pressure-testing of Uponor MLCP installations.
2.91
1.67
1.73
1.80
4.04
10.61
2 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Uponor Modular System
Uponor RS Press Adapter MLCP
Description Code Qty Price each
RS 2-16 1059397 1
RS 2-20 1059396 1
RS 2-25 1029121 1
RS 2-32 1029122 1
RS 2-40 1046940 1
RS 2-50 1046941 1
RS 2-63 1029125 1
RS 2-75 1029126 1
RS 3-90 1029127 1
RS 3-110 1029128 1
Made of tin plated brass with stainless steel sleeve. For connection of MLCP to RS2/RS3 Bodies.Note: Pressing tool UP75 must be used for pressing all Modular Press Adapters. See page 109.
NEW
NEW
SELECT THE BODY SIZE
‘RS2’(up to 75mm)
‘RS3’(for 90mm - 110mm)
OR
SELECT THE BODY CONNECTION TYPE
Tee 45o Elbow 90o Elbow Coupler Reducer
CHOOSE AdapterS TO SUIT CONNECTION
Adapter Female Thread Male Thread Flange
Your benefits:
Components with hundreds of fitting
variations possible.
Greater flexibility and lower logistics
costs thanks to minimal number of system
components
Optimum availability with less storage space
and lower investment costs
Quick to install and can be pressed at the
workbench
Uponor’s Modular SystemUponor’s MLCP Modular Fittings Range is fast becoming the system of choice on many world-class projects. With just a small range of easy to install fittings, hundreds of connection possibilities can be created. The distinctive “click and lock” mechanism removes the need for overhead pressing allowing faster install times.
17.98
18.51
20.74
20.74
21.89
21.89
22.75
28.80
80.63
86.39
2 3e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Uponor Modular System
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ng
Uponor RS Elbow 90°
Description Code Qty Price each
RS 2 1029138 1
RS 3 1029139 1
Made of tin plated brass. Includes 2 lock pins.
Uponor RS Elbow 45°
Description Code Qty Price each
RS 2 1029140 1
RS 3 1029141 1
Made of tin plated brass. Includes 2 lock pins.
Uponor RS Coupling
Description Code Qty Price each
RS 2 1029144 1
RS 3 1029145 1
Made of tin plated brass. Includes 2 lock pins.
Uponor RS Tee
Description Code Qty Price each
RS 2 1029142 1
RS 3 1029143 1
Made of tin plated brass. Includes 3 lock pins.
Uponor RS Reducer
Description Code Qty Price each
RS 3/RS2 1029146 1
Made of tin plated brass. Includes 1 lock pin.
22.75
69.11
32.25
75.87
20.74
51.84
28.80
74.87
38.01
2 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Uponor Modular System
Flexible Plum
bing & R
adiator Heating
Uponor RS Male Adapter
Description Code Qty Price each
RS 2 MT 1 ½” 1059402 1
RS 2 MT 2” 1029131 1
RS 2 MT 2 ½” 1029132 1
RS 3 MT 3” 1029133 1
Made of tin plated brass. For connection to RS2/RS3 Bodies.
Uponor RS Female Adapter
Description Code Qty Price each
RS 2 FT ½” 1059403 1
RS 3 FT ½” 1059404 1
RS 2 FT 1” 1029134 1
RS 2 FT 2” 1029135 1
RS 2 FT 2 ½” 1029136 1
RS 3 FT 3” 1029137 1
Made of tin plated brass. For connection to RS2/RS3 Bodies.
Uponor RS Flange
Description Bolt Circle Bolt Holes Code Qty Price each
RS 2 DN 65 (PN 6) 130 4 1059398 1
RS 2 DN 65 (PN 16) 145 4 1059399 1
RS 3 DN 80 (PN 6) 150 4 1059400 1
RS 3 DN 80 (PN 16) 160 8 1029129 1
RS 3 DN 100 (PN 6) 170 4 1059401 1
RS 3 DN 100 (PN 16) 180 8 1029130 1
Made of tin plated brass. For connection to RS2/RS3 Bodies.
Uponor RS Spacer
Description Code Qty Price each
RS 2 170mm 1046477 1
RS 3 250mm 1046478 1
RS 2 5mm 1046750 1
RS 3 5mm 1046751 1
Made of tin plated brass. For connection to RS2/RS3 Bodies.
NEW
NEW
NEW
NEW
NEW
NEW
NEW
112.00
140.00
147.00
154.35
160.44
169.33
19.04
26.44
17.28
25.34
34.56
40.31
22.21
25.34
34.56
40.31
59.90
103.67
28.80
46.08
2 5e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
MLCP Manifolds, Adapters & Accessories
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ng
Uponor NV Manifold
Description Code Qty Price each
1 port extension set 1002189 1
2 port 1002190 1
3 port 1002191 1
4 port 1002192 1
5 port 1002193 1
6 port 1002194 1
7 port 1002195 1
8 port 1002196 1
The Uponor NV Manifold includes chrome plated flow and return headers pre-mounted on nickel plated brackets with fill & drain points. Primary connections are 1” BSP and outlet on nickel plated connections are ¾” Eurocone. Designed for use in Radiator systems.
Note: Eurocone compression adapters are supplied separately.
LS Manifold
Description Code Qty Price each
1 port extension set 1002181 1
2 port 1002182 1
3 port 1002183 1
4 port 1002184 1
5 port 1002185 1
6 port 1002186 1
7 port 1002187 1
8 port 1002188 1
9 port 1048274 1
10 port 1048275 1
11 port 1048276 1
12 port 1048277 1
The Uponor LS Manifold includes lock shield valves on the flow manifold for balancing the system. The manifold includes chrome plated flow and return headers pre-mounted on nickel plated brackets with fill & drain points. Primary connections are 1” BSP and outlet connections are ¾” Eurocone. Designed for use in Radiator systems.
Note: Thermal actuators & Eurocone compression adapters are supplied separately.
Manifold L
Description Code Qty Price each
2 port ¾” 1002280 1
3 port ¾” 1002281 1
4 port ¾” 1002282 1
2 port 1” 1002284 1
3 port 1” 1002285 1
4 port 1” 1002286 1
Supplied as a single manifold. Made of plated brass, ¾”or 1” MT x FT connections with ½” or ¾” MT outlets. Valves allow each circuit to be isolated. Delivered with loop labelling discs. Order adapters separately for connection to Uponor pipe (MLCP/PEX). Manifolds can be joined to make the required number of ports.
16.30
23.21
32.30
18.14
27.81
35.07
55.46
85.49
114.33
136.39
158.22
180.04
202.20
225.50
91.74
108.75
146.29
179.30
213.10
245.59
280.59
314.87
347.03
378.28
409.68
441.76
2 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Description Code Qty Price each
2 port 1” 1014107 1
3 port 1” 1014111 1
4 port 1” 1014109 1
Description Code Qty Price each
¾”/1” 1002277 1
Description Code Qty Price each
¾”MT x ¾”FT 1002279 1
Description Code Qty Price each
¾” FT 1002275 1
MLCP Manifolds, Adapters & Accessories
Flexible Plum
bing & R
adiator Heating
Manifold PSupplied as a single manifold. Made of plated brass, with 1”MT x 1”FT with ½”MT outlets. Order adapters separately for connection to Uponor pipe (MLCP/PEX). Manifolds can be joined to make the required number of ports.
Manifold L bracketSupplied as a single bracket. Holds manifolds in place at a vertical distance of 220mm apart.
Manifold L ball valve (¾”)
Supplied as a single valve. Made of plated brass. Used to isolate the whole manifold assembly.
Manifold L end plug
Description Code Qty Price each
¾” MT 1002273 20
1” MT 1002274 20
Made of plated brass, with sealing O-Ring.
Manifold L end cap (with sealing washer)Made of plated brass.
Description Code Qty Price each
1” 1014117 1
Manifold P bracketSupplied as a single bracket. Made of galvanized steel, for the sound absorbing installation of Manifold P.
7.40
2.08
20.06
15.14
26.37
21.46
3.42
3.42
9.35
2 7e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
MLCP Manifolds, Adapters & Accessories
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ng
Manifold P cap (with sealing washer)
Description Code Qty Price each
½” FT 1014120 20
1” FT 1014121 20
Made of plated brass, for use with Manifold P.
Manifold Connection Fitting with Thermometer and Airvent
Description Code Qty Price each
AAV & Thermometer Gauge 1046886 2
For connection to LS/TM Manifold. Can be fitted to left or right hand side of manifold.
Automatic Manifold By-Pass
Description Code Qty Price each
Manifold by-pass between flow and return 1048278 2
Preset to 0.25 bar. For connection between flow and return manifold (TM/LS). Complete with isolation valve for filling purposes.
Eurocone compression adapters (MLCP)
Description Code Qty Price each
12x¾”FT 1013809 1
16x¾”FT 1058090 1
20x¾”FT 1058092 1
25x¾”FT 1058093 1
Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT manifolds outlets NV/LS/TM/L.
BSP compression adapters (MLCP)
Description Code Qty Price each
12x½” FT 1013831 1
16x½” FT 1058086 1
20x½” FT 1058088 1
Made of plated brass. For use with Manifold L/P.
2.63
4.34
5.97
3.48
4.11
8.36
63.15
4.34
2.66
5.99
29.91
2 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Uponor MLCP Radiator & Tapwater Terminations/Accessories
Flexible Plum
bing & R
adiator Heating
Press connection elbow
Description Code Qty Price each
12x75mm Chrome 1014644 20
16x250mm Copper 1044852 20
16x350mm Chrome 1015626 20
16x1100mm Chrome 1015631 20
Robust press radiator connection elbow with 15mm plated or copper spigot (for compression jointing only).
Press connection tee
Description Code Qty Price each
16x350x16mm 1015628 20
Robust press radiator connection tee with 15mm bent plated copper spigot (for compression jointing only).
Danfoss connection set
Description Code Qty Price each
16x½” MT 1013970 20
Made of plated brass, male-threaded pressure screw. With insert part and clamp ring, with blue O-ring, suitable for use with female-threadedDanfoss radiator valves.
Wall plate elbow
Description Code Qty Price each
16x½” 1015345 10
20x¾” 1015515 5
20x½” 1015512 10
25¾” 1048471 5
16x½” XL 1046332 10
20x½” XL 1046333 10
Made of plated brass, with fixed press sleeve and smart end flange. XL denotes extended length body.
Chromed radiator compression elbow
Description Code Qty Price each
15x20mm MT 1002124 10
Plated brass elbow with 15mm plated brass spigot for connecting MLCP to radiators with suitable compression adapters (12mm : 1013813, 16mm : 1013806).
7.72
9.97
10.92
21.86
17.15
3.16
10.79
10.50
8.04
11.10
16.62
18.46
6.64
2 9e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Description Code Qty Price each
16x½” FT x16 1015454 5
Uponor MLCP Radiator & Tapwater Terminations/Accessories
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ng
Manthorpe Radiator Pipe Guide and Seal
Description Code Qty Price each
12mm 1046371 1
For use with 12mm MLCP and PEX as a seal when exiting the wall behind radiators.
Snap ring
Description Code Qty Price each
12mm 1011368 50
15/16mm 1011370 50
20mm 1011372 50
Clip-on snap ring made of Polypropylene, available in white only.
Compression adapter (MLCP)
Description Code Qty Price each
12x10mm Brass 1013814 20
12x10mm Chrome 1013815 20
12x15mm Chrome 1013813 20
16x15mm Brass 1013805 10
16x15mm Chrome 1013806 10
20x22mm Brass 1013807 10
25x28mm Brass 1013808 10
For adaption of MLCP to other compression fitting bodies.
Note, threads must be checked.
MLCP/copper adapter fittings
Description Code Qty Price each
16x15mm 1014517 10
20x22mm 1014556 10
25x22mm 1014582 10
25x28mm 1014587 10
32x28mm 1014605 10
Press sleeve and brass spigot for connecting MLCP to copper compression fittings (brass spigot is not suitable for solder connections).NB. A suitable copper olive must be used.
Press Tap U Elbow
16.92
3.63
3.73
3.55
1.95
2.12
3.58
7.79
4.28
5.71
6.83
10.78
12.28
8.45
0.25
0.26
0.26
3 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Description Code Qty Price each
Set contains 10 insert pins and 10 screws 1057847 1
Description Code Qty Price each
Set contains shroud, baffle, insert pin and screw 1057846 1
Uponor MLCP Radiator & Tapwater Terminations/Accessories
Press Lever Ball Valve
Description Code Qty Price each
16mm 1046603 6
20mm 1046604 6
25mm 1046605 6
32mm 1046606 6
40mm 1046607 4
50mm 1046608 4
63mm 1046609 2
Fully assembled and sealed lever valve c/w press adapters to MLCP.
Compression Isolation Valve
Description Code Qty Price each
16mm 1046610 10
20mm 1046611 10
25mm 1046612 5
Isolation valves c/w compression adapters to MLCP.
Insert Pins and Screws for Mounting TrackFor attachment of smart end wall elbows to mounting plate/angle/track. Set contains 10 insert pins and 10 screws.
Flexible Plum
bing & R
adiator Heating
Sound Protection SetFor sound insulation of a pair of smart end elbows. Contains shroud, baffle, insert pin and screw.
23.68
32.63
36.19
48.94
91.75
106.25
181.47
13.36
22.49
43.60
4.23
10.15
3 1e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Uponor MLCP Radiator & Tapwater Terminations/Accessories
Mounting Plate
Description Code Qty Price each
75/150mm 1057840 5
For use with smart end wall elbows. Designed for on-wall mounting. Allows tap connections with 75mm or 150mm spacings. Supplied with 2 insert pins and screws per plate.
Mounting Angle
Description Code Qty Price each
75/150mm 1057842 5
For use with smart end wall elbows. Designed for in-wall mounting and flush finish. Allows tap connections with 75mm or 150mm spacing. Supplied with 2 inserts pins and screws per angle. Fl
exib
le P
lum
bing
& R
adia
tor
Hea
ting
Mounting Track
Description Code Qty Price each
2000mm 1057844 10
For use with smart end wall elbows, on-wall or in-wall construction, with mounting steps every 75mm.
For Uponor Tap Water SystemUPONOR MLC PIPE
www.uponor.co.uk
Smart End Elbow Range
1.84
3.60
12.88
3 3e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Uponor Q&E PEX Plumbing System
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ng
PEX Pipe white, supplied in 3m straight lengths
Description Code Qty Price per/m
16x1.8mm 1058803 75m
20x1.9mm 1058804 48m
25x2.3mm 1058805 30m
Diffusion-resistant PEX pipes, five-layer (PEX – adhesive agent – oxygen barrier – adhesive agent – PEX), for general plumbing and radiator connection applications. Manufactured to ISO 15875 for hot and cold water and heating applications with full WRAS approval.
PEX Pipe white, supplied in coilsDiffusion-resistant PEX pipes, five-layer (PEX – adhesive agent – oxygen barrier – adhesive agent – PEX), for general plumbing and radiator connection applications. Manufactured to ISO 15875 for hot and cold water and heating applications with full WRAS approval.
Description uPoints Code Qty Price per/m
16x1.8mm 200 1059173 50m
16x1.8mm 350 1059182 100m
16x1.8mm 700 1059183 200m
16x1.8mm 1750 1058802 500m
20x1.9mm 250 1059174 50m
25x2.3mm 300 1059175 50m
PEX Pipe-in-Pipe
Description uPoints Code Qty Price per/m
16mm - Red 250 1059179 50m
16mm - Blue 250 1059176 50m
20mm - Red 300 1059180 50m
20mm - Blue 300 1059177 50m
25mm - Red 350 1059181 50m
25mm - Blue 350 1059178 50m
Uponor pipe-in-pipe system is designed to be integrated into the building structure and to be covered by screeds. Pipe can be withdrawn without damage to the building structure. Uponor pipe-in-pipe complies with the requirements of the Water Regulations 1999.
PEX conduit
Description Code Qty Price per/m
25 Black (16mm) 1012860 50m
34 Black (20mm) 1012864 50m
42 Black (25mm) 1012872 25m
Made of high-density polyethylene. Supplied in coils. Details and prices of a wide range of other sizes of conduit are available on request. First number shown in description refers to O.D. of the protective tube. The second is the size of PEX pipe suitable. N.B. Does not include PEX Pipe.
1.84
3.48
4.58
2.81
2.81
2.48
3.48
3.96
3.96
0.91
1.15
1.97
1.67
1.67
1.67
1.67
3.25
4.56
3 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Uponor Q&E PEX rings
Description Code Qty Price each
16mm Red 1058010 20
16mm Blue 1058013 20
16mm White 1057453 20
20mm Red 1058011 20
20mm Blue 1058014 20
20mm White 1057454 20
25mm Red 1058012 20
25mm Blue 1058015 20
25mm White 1057455 20
Must be used on all Uponor Q&E PEX plumbing system joints.
Coupling
Description Code Qty Price each
16mm 1008669 5
20mm 1008932 5
25mm 1008671 5
Made from Engineered Plastic (PPSU). Uponor PEX plumbing system on both ends.
Uponor Q&E PEX Plumbing System
Elbow 90o
Description Code Qty Price each
16mm 1008679 5
20mm 1008680 5
25mm 1008681 5
Made from Engineered Plastic (PPSU). Uponor PEX plumbing system on both ends.
Equal Tee
Description Code Qty Price each
16mm 1008684 5
20mm 1008685 5
25mm 1008686 5
Made from Engineered Plastic (PPSU). Uponor PEX plumbing system on all ends.
Flexible Plum
bing & R
adiator Heating
0.24
0.24
0.24
0.30
0.30
0.30
0.36
0.36
0.36
1.10
1.55
2.35
1.08
1.72
3.37
1.60
2.32
3.89
3 5e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Uponor Q&E PEX Plumbing System
Tee with reducer
Description Code Qty Price each
A B C
16x20x16mm 1008710 5
20x16x16mm 1008700 5
20x16x20mm 1008689 5
20x20x16mm 1008697 5
20x25x20mm 1008711 5
25x16x16mm 1008702 5
25x16x20mm 1008699 5
25x16x25mm 1008690 5
25x20x16mm 1008701 5
25x20x20mm 1008703 5
25x20x25mm 1008691 5
25x25x20mm 1001420 5
Made from Engineered Plastic (PPSU). Uponor PEX plumbing system on all ends.
Female centre tee
Description Code Qty Price each
A B C
16x½”x16mm 1042338 5
20x½”x20mm 1042339 5
25x½”x25mm 1042340 5
25x¾”x25mm 1042341 5
Made from Engineered Plastic (PPSU).
Male thread adapter
Description Code Qty Price each
16x½” MT 1008661 5
20x½” MT 1008662 5
20x¾” MT 1008663 5
25x¾” MT 1008664 5
25x1” MT 1008665 5
Uponor PEX plumbing system on one end. With BSP male-threaded adapter for screw connections.
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ng
B
CA
B
CA
Female thread adapter
Description Code Qty Price each
16x½” FT 1042329 5
20x½” FT 1042330 5
20x¾” FT 1042331 5
25x¾” FT 1042332 5
25x1” FT 1042333 5
Uponor PEX plumbing system on one end. With BSP female-threaded adapter for screw connections.
2.60
2.60
2.60
3.00
3.92
3.92
3.92
3.92
3.92
3.92
3.60
4.50
3.80
4.79
5.99
6.30
2.88
3.36
3.36
3.59
5.50
3.90
4.90
5.04
6.00
10.80
3 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Tap connector straight
Description Code Qty Price each
16x½” FT 1038021 1
20x½” FT 1038022 1
20x¾” FT 1038023 1
25x¾” FT 1038024 1
25x1” FT 1038025 1
Uponor PEX plumbing system on one end. With BSP female-threaded adapter for screw connections. Washer included.
Uponor Q&E PEX Plumbing System
Flexible Plum
bing & R
adiator Heating
Wall plate elbow
Description Code Qty Price each
16x½” 1042342 5
20x½” 1042343 5
Uponor PEX plumbing system on one end. With BSP female-threaded adapter for screw connections.
Reducer
Description Code Qty Price each
20x16mm 1008674 5
25x16mm 1008675 5
25x20mm 1008676 5
Uponor PEX plumbing system on both ends.
Elbow 90o with female thread
Description Code Qty Price each
16x½” FT 1042334 5
20x½” FT 1042335 5
20x¾” FT 1042336 5
25x¾” FT 1042337 5
Uponor PEX plumbing system on one end. With BSP female-threaded adapter for screw connections.
Tap connector elbow 90o
Description Code Qty Price each
16x½” FT 1038037 1
20x½” FT 1038038 1
20x¾” FT 1038039 1
25x¾” FT 1038040 1
Uponor PEX plumbing system on one end. With BSP female-threaded adapter for screw connections. Washer included.
4.79
5.16
5.99
7.19
8.39
3.59
5.99
5.99
5.99
5.16
5.99
7.19
9.59
1.50
2.40
3.00
4.79
5.51
3 7e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Uponor Q&E PEX Plumbing System
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ng
Manifold PEX (PPSU), BSP inlet
Description Code Qty Price each
¾”x16x16x16mm 1008714 1
¾”x20x16x16mm 1008716 1
¾”x16x16x16x16mm 1008715 1
¾”x20x16x16x16mm 1008717 1
Supplied as a single manifold. Made from Engineered Plastic (PPSU). Use with Uponor Q&E PEX rings
Manifold PEX (PPSU), Q&E inlet
Description Code Qty Price each
25/20x16x16mm 1008720 1
25/20x16x16x16mm 1008721 1
25/16x16x16mm 1008718 1
25/16x16x16x16mm 1008719 1
Supplied as a single manifold. Made from Engineered Plastic (PPSU). Use with Uponor Q&E PEX rings
Manifold H PEX (PPSU), Q&E inlet
Description Code Qty Price each
20/20x16x16mm 1008722 1
20/20x16x16x16mm 1008723 1
25/20x16x16mm 1008724 1
25/20x16x16x16mm 1008725 1
Supplied as a single manifold. Made from Engineered Plastic (PPSU). Use with Uponor Q&E PEX rings
Manifold PEX brackets
Description Code Qty Price each
¾” 1001338 2
For use with Manifold PEX. Not suitable for use with modular manifolds.
Modular manifold c/c 50
Description Code Qty Price each
1xG½” 1047997 1
1xG¾” 1047998 1
Made from Engineered Plastic (PPSU), c/w BSP outlets
8.39
8.76
8.39
8.76
8.76
8.76
8.39
8.76
4.79
4.79
5.50
6.00
8.40
9.20
6.60
3 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Uponor Q&E PEX Plumbing System
Flexible Plum
bing & R
adiator Heating Modular straight connection
Description Code Qty Price each
¾” 1048002 1
Made from Engineered Plastic (PPSU). For straight adaption from Modular manifold, BSP thread.
Modular elbow connection
Description Code Qty Price each
¾” 1048003 1
Made from Engineered Plastic (PPSU). For 90 degree adaption from Modular manifold, BSP thread.
Modular end cap
Description Code Qty Price each
1” 1048004 1
Modular end cap c/w air nipple
Description Code Qty Price each
1” 1048005 1
Modular manifold Q&E c/c 50
Description Code Qty Price each
2x16 1047999 1
3x16 1048000 1
4x16 1048001 1
Made from Engineered Plastic (PPSU), c/w with Uponor Q&E outlets
7.19
7.19
4.79
11.99
9.59
10.79
14.39
3 9e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Uponor Q&E PEX Plumbing System
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ng
Modular manifold wall bracket
Description Code Qty Price each
1” 1048007 1
Bag includes two wall brackets, two long - and two short clips.
Blanking plug
Description Code Qty Price each
½” MT 1008281 25
For sealing off Uponor 1/2” outlets during pressure testing
Copper adapter
Description Code Qty Price each
16x15mm 1023040 5
20x22mm 1047941 5
25x22mm 1023042 5
25x28mm 1047942 5
To adapt to Uponor Q&E PEX pipe from copper. Allow to cool before making Q&E joint.
Compression adapters (PEX Pipe)
Description Code Qty Price each
16x½” FT 1058934 1
20x½” FT 1058935 1
Brass compression fitting to be used in conjunction with standard 15mm compression fitting bodies. Compatibility of threads must be checked.
Manifold adapters (PEX Pipe)
Description Code Qty Price each
16x½” FT 1059510 1
20x½” FT 1059511 1
Made of plated brass. For use with Manifold L/P.
Eurocone compression adapters (PEX Pipe)
Description Code Qty Price each
16x¾”FT 1057368 1
20x¾”FT 1057370 1
Made of brass, ¾”FT Eurocone thread for connection to ¾”MT outlets of NV/LS/TM Manifolds.
6.60
1.80
1.80
4.08
3.59
4.79
2.56
6.23
2.56
6.13
6.13
6.97
4 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Uponor Q&E PEX Plumbing System
Flexible Plum
bing & R
adiator Heating
Radiator connection elbow
Description Code Qty Price each
16x300mm 1023045 2
Uponor Q&E PEX plumbing system on one end. Chrome plated brass elbow with 15mm spigot for connection to radiators.
Single bend guide plastic
Description Code Qty Price each
Single bend guide, PEX 16mm pipe-in-pipe 1009008 1
Used to curve and protect Uponor PEX 16mm pipe-in-pipe up out of the floor leaving only the Uponor PEX 16mm pipe exposed through the floor. Protects the pipe below floor level. Price refers to single bend guide.
Snap ring
Description Code Qty Price each
15/16mm 1011370 50
Clip-on snap ring made of Polypropylene, available in white only.
Pipe clips
Description Code Qty Price each
12mm 1013141 100
15/16mm 1013142 100
20mm 1013144 50
22/25mm 1013145 50
28/32mm 1013146 50
40mm 1013147 25
Pipe clips made of white plastic.
Radiator Connection pipe c/w stop end
Description Code Qty Price each
16x200mm 1042320 1
For easy first fix installation of radiators. After pressure testing, cut off stop end, then make connection.
11.99
5.62
0.26
0.52
0.52
0.67
0.85
1.67
2.08
7.19
4 1e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Uponor Q&E PEX Plumbing System
Flex
ible
Plu
mbi
ng &
Rad
iato
r H
eati
ng
Radiator connection guide (solid floor)
Description Code Qty Price each
12/16mm 1002237 1
Robust bend support and white powder coated aluminium upstand to protect pipe between floor and radiator. Price refers to a pack of two guides.
Radiator connection guide (joisted floor)
Description Code Qty Price each
12/16mm 1002238 1
Robust white powder coated aluminium upstand to protect pipe between floor and radiator. Price refers to a pack of two guides.
Termination Box
Description Code Qty Price each
16x ½” FT 1048622 10
To be used with 16x ½” FT 90˚ elbow (item 1042334) and radiator connection pipe.
Radiator connection pipe
Description Code Qty Price each
½” MT x 250mm 1002033 1
½” MT x 350mm Chrome plated 1015425 20
½” MT x 1100mm Chrome plated 1015428 20
15mm copper x ½” BSP MT to connect radiator to termination box.
NEW
NEW
NEW
17.80
16.78
3.00
8.39
8.50
19.20
4 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Flexible Plum
bing & R
adiator Heating
Conduit pipe clip
Description Code Qty Price each
25mm 1009014 50
34mm 1009015 20
For nailing conduit in position.
Uponor PEX insert spares
Description Code Qty Price each
15mm 1002034 1
22mm 1002035 1
28mm 1002036 1
For use with Uponor PEX plumbing in old sizes 15x1.5, 22x2.0, 28x2.6mm. Allows modification and repairs in conjunction with standard compression fitting.
Uponor Q&E PEX Plumbing System
PEX Pipe bend supports
Description Code Qty Price each
Metal
15mm/16mm 1009004 1
20mm 1009233 1
25mm 1009006 1
28-34mm 1001231 1
These should be used for all pipe and pipe-in-pipe bends. Use the correct bend support to match the outer diameter of the pipe or of the conduit.
Chromed Upstand Pipe Pack (750mm)
Description Code Qty Price each
12/16mm 1002239 1
Chrome upstand to protect pipe between floor and radiator. For use with both pipe-in-pipe and pipe without conduit. Pack of two upstands.
Chromed Upstand Pipe Pack (250mm)
Description Code Qty Price each
12/16mm 1002240 1
Chrome upstand to protect pipe between floor and radiator. For use with both pipe-in-pipe and pipe without conduit. Pack of two upstands.
1.59
2.47
3.29
3.94
0.36
0.96
0.57
1.08
0.79
26.43
14.59
4 3e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Single plugged hook
Description Code Qty Price each
60mm 1013137 50
80mm 1013138 50
For the fast attachment of pipes with outer diameter of up to 32mm. Suitable for use on concrete floor.
Twin plugged hook
Description Code Qty Price each
60mm 1013139 50
80mm 1013140 50
For the fast attachment of pipes with outer diameter of up to 32mm. Suitable for use on concrete floor.
Uponor Q&E PEX Plumbing System
Spanner
Description Code Qty Price each
25mm open spanner 1034109 1
For use with ½” compression adapters when connecting to manifolds.
0.31
0.31
0.34
0.34
39.00
4 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m4 4
Plumbing Applications Course A tailored course to show the advantages of Uponor plumbing applications over traditional materials. Delegates who will benefit from this course would have a previous plumbing knowledge.
The course includes Pipe technology, MLCP Riser System, Multi-layer, PEX pipes, RTM, Pre-Insulated Pipe Systems & Practical training.
uPoints700
NEW COURSE
The Uponor Training Academy was established to offer you a range of industry accepted courses. Starting with a comprehensive installer training course and moving through to design and control oriented workshops, encompassing techniques associated with Uponor Plumbing and Underfloor Heating products.
We are also able to offer bespoke workshops, tailored to suit your individual needs. Our main training academy is a purpose built facility close to Junction 20 off the M1, in the market town of Lutterworth.
Training Academy: 01455 551363
Uponor Head Office: 01455 550355
email: [email protected]
www.uponor.co.uk
Also see page 118 for other courses
available
4 5e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 4 5
Pre-Insulated Pipe System
Pre
-Ins
ulat
ed P
ipe
Syst
em
Over 30 years service life, designed especially for heating water (Thermo), hot tap water (Aqua) and cooling water (Supra). Applications for district heating and cooling, remote boilers, biomass, CHP and industrial fluids. High flexibility, no special tools required and available ‘cut-to-length.’
• Pre-Insulated Pipe System Guide 46
• Shipping Costs 47
• Pre-Insulated Pipe 48
• End Caps & Internal Termination Cover 51
• Fittings, Components & Accessories 52
4 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Pre-Insulated P
ipe System
Order Code Description
Stage 1 Stage 2 Stage 3
Pre-Insulated Pipe Systems - Easy as 1, 2, 3!
Pick your application pipe and length... Pick your End cap, one for each end... Pick your coupler. . .
Order Code Description Order Code Description
WIPEX Coupling, 6 bar / 95°C
Rubber end-capThermo Single 1018315 25+32/140 1018315 25+32/1401018313 32+40+50/1751018313 32+40+50/1751018312 63+75/1751018310 75+90+110/2001018310 75+90+110/2001018310 75+90+110/200
1018328 25x1” 6B1018329 32x1” 6B1018330 40x1¼” 6B1018331 50x1¼” 6B1018332 63x2” 6B1018333 75x2” 6B1018334 90x3” 6B1018335 110x3” 6B
1018134 2x25/1751018135 2x32/1751018136 2x40/1751018137 2x50/2001018138 2x63/200
Thermo Twin Rubber end-cap 1018309 2x 25+32+40/175 1018309 2x 25+32+40/1751018309 2x 25+32+40/1751018307 2x 40+50+63/2001018307 2x 40+50+63/200
WIPEX Coupling, 6 bar / 95°C
1018328 25x1” 6B1018329 32x1” 6B1018330 40x1¼” 6B1018331 50x1¼” 6B1018332 63x2” 6B
Thermo Mini 1018132 25/681018133 32/68
Rubber end-cap 1018316 25+32/68 1018316 25+32/68
WIPEX Coupling, 6 bar / 95°C
1018328 25x1” 6B1018329 32x1” 6B
Aqua Single 1018117 25/140 1018118 32/1401018119 40/1751018120 50/1751018121 63/175
1018315 25+32/140 1018315 25+32/1401018313 32+40+50/1751018313 32+40+50/1751018312 63+75/175
Rubber end-cap WIPEX Coupling, 10 bar / 95°C
1018336 25x1” 10B1018338 32x1” 10B1018339 40x1¼” 10B1018340 50x1¼” 10B1018341 63x2” 10B
Quattro 1018147 2x25/25+25/175
1018148 2x32/25+25/175
1018149 2x32/32+25/175
1018306 175 Quattro
1018306 175 Quattro
1018306 175 Quattro
Rubber end-cap WIPEX Coupling, 6 bar & 10 bar
1018328 25x1” 6B 1018336 25x1” 10B
1018329 32x1” 6B 1018336 25x1” 10B
1018329 32x1” 6B 1018338 32x1” 10B1018336 25x1” 10B
Supra/Supra Plus
1018124 25/681018125 32/681018126 40/1401018127 50/1401018128 63/1401018129 75/1751018130 90/1751018131 110/200
Plasson couplingRubber end-cap 1018316 25+32/68 1018316 25+32/681018314 40+50+63/1401018314 40+50+63/1401018314 40+50+63/1401018312 63+75/1751018311 90+110/1751018310 75+90+110/200
1018400 25x¾”1018401 32x1”1018402 40x1¼”1018403 50x1½”1018404 63x2”1018405 75x2½”1018406 90x3”1018407 110x4”
Aqua Twin 1018139 25+25/175
1018140 32+25/175
1018141 40+25/175
1018142 50+25/175
1018309 2x 25+32+40/175
1018309 2x 25+32+40/175
1018309 2x 25+32+40/175
1018308 2x 25+32+50/175
Rubber end-cap WIPEX Coupling, 10 bar / 95°C
1018336 25x1” 10B
1018338 32x1” 10B1018336 25x1” 10B
1018339 40x1¼” 10B1018336 25x1” 10B
1018340 50x1¼” 10B1018336 25x1” 10B
1018109 25/140 1018110 32/1401018111 40/1751018112 50/1751018113 63/1751018114 75/2001018115 90/2001018116 110/200
e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
KW
IV
AB
DD
KYFK
PH
EH
TD
PA
G
KA
ML
DGNE*
CA
FY
DH SR
TS
DL
LA
HGYO
HULS
WF
DN
LN
NG
PE
NR
IP
CO
SS
CM
MECT
TNRH
GU
BNPO
RGSL
HP
LUAL
MK
OX
CV NN
LE
B
WS
DE
S
PRBB
BD
HD
HX
SK
CW
LWN
BL OL
M
WA
CHLL
SY*
HR
NPCF
SA*
LD
TF
ST
WV
DY
WR
GL
SN
BS
BA
DTBH
SPSO
TA
EX
TQ
PL
TR
CB
SG
LL
N
HA
WD
UB
KTDA
RMEN
CR BR
TW
SW
WWC
EC
NW
SE
E
London Postcodes
Republic of
Ireland
BT
Pre-insulated Pipe delivery charges apply to orders of net invoice value under £1000 only (excl. VAT & delivery).
Don’t forget shipping costs - Pre-Insulated Pipe Systems: Zone A B C D E F G
The shaded areas on the map relate to Pre-Insulated Pipe delivery (orders under £1000 only). Please refer to the key above.
Delivery on Pre-Insulated orders over £1000 net is free!
Collection also available by appointment.
4 7
Pre
-Ins
ulat
ed P
ipe
Syst
em
Illus
trat
ions
cor
rect
at t
ime
of p
rintin
g. A
pril
2013
. E&
OE.
4 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Thermo Mini
Description uPoints Code Qty Price per/m
25/68 1200 per10m 1018132 200
32/68 1200 per10m 1018133 200
Pre-insulated Single pipe PEX, max. 6 bar / 95°C heating.Use Wipex 6 bar coupling.
Thermo Single
Description uPoints Code Qty Price per/m
25/140 1200 per10m 1018109 200
32/140 1200 per10m 1018110 200
40/175 1200 per10m 1018111 200
50/175 1200 per10m 1018112 200
63/175 1200 per10m 1018113 200
75/200 1200 per10m 1018114 100
90/200 1200 per10m 1018115 100
110/200 1200 per10m 1018116 100
Pre-insulated Single pipe PEX, max. 6 bar / 95°C heating. Also available with heat trace cable on request. Use Wipex 6 bar coupling.
Uponor Pre-Insulated Pipe
Pre-Insulated P
ipe System
Thermo Twin
Description uPoints Code Qty Price per/m
2x25/175 1200 per10m 1018134 200
2x32/175 1200 per10m 1018135 200
2x40/175 1200 per10m 1018136 200
2x50/200 1200 per10m 1018137 100
2x63/200 1200 per10m 1018138 100
Pre-insulated Twin pipe PEX, max. 6 bar / 95°C heating. Use Wipex 6 bar coupling.
Aqua Single
Description uPoints Code Qty Price per/m
25/140 1200 per10m 1018117 200
32/140 1200 per10m 1018118 200
40/175 1200 per10m 1018119 200
50/175 1200 per10m 1018120 200
63/175 1200 per10m 1018121 200
Pre-insulated Single pipe PEX, max. 10 bar / 95°C warm water.Also available with heat trace cable on request. Use Wipex 10 bar coupling.
Sizes 75mm, 90mm and 110mm available on request for large projects.
23.43
27.15
35.42
38.47
50.46
54.01
61.21
83.38
93.80
111.70
48.54
55.18
59.50
81.30
98.14
36.74
40.95
54.35
63.85
73.56
4 9e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Pre
-Ins
ulat
ed P
ipe
Syst
em
Uponor Pre-Insulated Pipe
Aqua Twin
Description uPoints Code Qty Price per/m
25+25/175 1000 per10m 1018139 200
32+25/175 1000 per10m 1018140 200
40+25/175 1000 per10m 1018141 200
50+25/175 1000 per10m 1018142 200
Pre-insulated Twin pipe PEX, max. 10 bar / 95°C warm water. Use Wipex 10 bar coupling.
Quattro
Description uPoints Code Qty Price per/m
Thermo Aqua
2x25/25+25/175 1200 per10m 1018147 200
2x32/25+25/175 1200 per10m 1018148 200
2x32/32+25/175 1200 per10m 1018149 200
Pre-insulated Quattro pipe PEX, max. 6 bar and 10 bar / 95°C,heating / warm water. (Contains 2 x Thermo Pipes and 2 x Aqua Pipes).
Supra
Description uPoints Code Qty Price per/m
25/68 1000 per10m 1018124 150
32/68 1000 per10m 1018125 150
40/140 1000 per10m 1018126 150
50/140 1000 per10m 1018127 150
63/140 1000 per10m 1018128 150
75/175 1000 per10m 1018129 100
90/175 1000 per10m 1018130 100
110/200 1000 per10m 1018131 100
Order to leadtime direct from Germany.Pre-insulated Single pipe PE-HD, max. 16 bar / 20°C chilled water. Potable Water. Use Plasson coupling or Wipex 6 bar Coupling.
22.21
22.92
48.25
50.66
55.09
53.55
57.90
79.95
71.64
78.66
82.25
52.21
55.30
60.42
68.52
5 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Uponor Pre-Insulated Pipe
Pre-Insulated P
ipe System
Supra Plus - Don’t freeze up this winter!
•Builtinanti-freezecableto
protect cold water lines
•Lengthsupto150mpossible
•Easytousecontrolunit
Supra Plus
Description uPoints Code Qty Price per/m
25/68 1000 per10m 1048902 150
32/68 1000 per10m 1048903 150
40/140 1000 per10m 1048904 150
50/140 1000 per10m 1048905 150
63/140 1000 per10m 1048906 150
75/175 1000 per10m 1048907 100
90/175 1000 per10m 1048908 100
110/200 1000 per10m 1048909 100
Pre-Insulated, Single PE-HD pipe for chilled potable water, complete with freeze protectioncable.
43.65
44.36
69.68
72.11
76.54
77.34
79.32
101.38
5 1e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Pre
-Ins
ulat
ed P
ipe
Syst
em
Pre-Insulated Pipe End Caps & Internal Termination Cover
Rubber end-cap set
Description Code Qty Price each
Twin40+50+63/200 1018307 1
Twin25+32+50/175 1018308 1
Twin25+32+40/175 1018309 1
Rubber end-cap set
Description Code Qty Price each
75+90+110/200 1018310 1
90+110/175 1018311 1
63+75/175 1018312 1
32+40+50/175 1018313 1
40+50+63/140 1018314 1
25+32/140 1018315 1
25+32/68 1018316 1
End Cover
Description Code Qty Price each
140mm 1045310 1
175mm 1045311 1
200mm 1045312 1
For above ground termination inside a building. Suitable for Single, Twin and Quattro pipes.
Description Code Qty Price each
Quattro 1018306 1 43.44
45.63
44.55
40.42
45.19
56.93
41.51
41.51
34.57
34.15
25.59
25.43
28.15
33.95
5 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Pre-Insulated Pipe Fittings and Components
Pre-Insulated P
ipe System
WIPEX Coupling, 10 bar / 95°C
Description Code Qty Price each
25x1” 1018336 1
32x1” 1018338 1
40x1¼” 1018339 1
50x1¼” 1018340 1
63x2” 1018341 1
Used with the following piping systems: Aqua Single, Aqua Twin and Quattro.Compression fitting with male thread for connection.
WIPEX Jointing Equal PN6
Description Code Qty Price each
25mm 1042972 1
32mm 1042973 1
40mm 1042980 1
50mm 1042984 1
63mm 1042981 1
75mm 1042985 1
90mm 1042986 1
110mm 1042987 1
Single fitting for joining two lengths of pipe together. For: Thermo Single, Thermo Twin, Thermo Mini, Quattro and Supra.
WIPEX Coupling, 6 bar / 95°C
Description Code Qty Price each
25x1” 1018328 1
32x1” 1018329 1
40x1¼” 1018330 1
50x1¼” 1018331 1
63x2” 1018332 1
75x2” 1018333 1
90x3” 1018334 1
110x3” 1018335 1
Used with the following piping systems: Thermo Single, Thermo Twin, Thermo Mini Quattro and Supra. Compression fitting with male thread for connection.
21.94
24.12
31.68
42.55
72.48
100.59
143.96
179.25
31.15
28.51
49.64
74.97
122.92
183.52
252.84
351.69
22.78
25.50
31.71
44.08
69.44
5 3e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Pre
-Ins
ulat
ed P
ipe
Syst
em
Pre-Insulated Pipe Fittings and Components
WIPEX 90° bend
Description Code Qty Price each
1” 1018350 1
1¼” 1018351 1
2” 1018352 1
3” 1018353 1
Used with the following piping systems: Aqua Single, Aqua Twin, Thermo Single, Thermo Twin, Thermo Mini and Quattro.
WIPEX Jointing Equal PN10
Description Code Qty Price each
25mm 1042970 1
32mm 1042974 1
40mm 1042979 1
50mm 1042983 1
63mm 1042982 1
Single fitting for joining two lengths of pipe together. For Aqua Single, Aqua Twin and Quattro.
WIPEX T-piece
Description Code Qty Price each
1” 1018345 1
1¼” 1018346 1
2” 1018347 1
3” 1018348 1
Used with the following piping systems: Aqua Single, Aqua Twin, Thermo Single, Thermo Twin, Thermo Mini and Quattro.
WIPEX Joint
Description Code Qty Price each
1” 1018355 1
1¼” 1018356 1
2” 1018357 1
3” 1018358 1
Used with the following piping systems: Aqua Single, Aqua Twin, Thermo Single, Thermo Twin, Thermo Mini and Quattro.
30.90
39.70
49.68
75.47
123.15
23.09
26.19
53.20
123.42
19.52
24.43
57.99
106.97
13.29
18.08
33.52
48.39
5 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Pre-Insulated Pipe Fittings, Components and Accessories
Pre-Insulated P
ipe System
WIPEX Flange
Description Bolt Circle Bolt Holes Code Qty Price each
1” 85 4 1018359 1
1¼” 100 4 1018360 1
2” 125 4 1018362 1
3” 160 8 1018364 1
Used with the following piping systems: Aqua Single, Aqua Twin, Thermo Single, Thermo Twin, Thermo Mini and Quattro.
WIPEX Reducer
Description Code Qty Price each
1¼”x1” 1018368 1
1½”x1¼” 1018369 1
2”x1” 1018371 1
2”x1¼” 1018372 1
3”x1” 1018374 1
3”x1¼” 1018375 1
3”x2” 1018376 1
Used with the following piping systems: Aqua Single, Aqua Twin, Thermo Single, Thermo Twin, Thermo Mini and Quattro.
Plasson coupling (to be used with Supra Pipe only)
Description Code Qty Price each
25x¾” 1018400 1
32x1” 1018401 1
40x1¼” 1018402 1
50x1½” 1018403 1
63x2” 1018404 1
75x2½” 1018405 1
90x3” 1018406 1
110x4” 1018407 1
WIPEX double union
Description Code Qty Price each
1”x1” 1018322 1
1¼”x 1¼” 1018323 1
2”x 2” 1018324 1
3”x 3” 1018325 1
For connecting wipex bodies together when installed in a chamber or H insulation set.
51.61
71.01
136.17
156.34
15.10
15.10
39.51
32.75
75.27
59.18
59.70
9.98
13.35
22.32
32.87
43.60
81.78
156.41
186.47
6.52
9.41
22.43
29.45
5 5e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Pre
-Ins
ulat
ed P
ipe
Syst
em
Pre-Insulated Pipe Fittings, Components and Accessories
Elbow insulation set
Description Code Qty Price each
ONE SIZE 1021991 1
For sealing elbow connections of Single and Twin pipes in the trench.Comprises insulating half-shells, stainless steel screws, plastic dowels and sealant.Only to be used with Uponor rubber end caps!
T-Insulation set
Description Code Qty Price each
ONE SIZE 1021990 1
For sealing T-connections of Single and Twin pipes in the trench.Comprises insulating half-shells, stainless steel screws, plastic dowels and sealant.Only to be used with Uponor rubber end caps!
‘H’ insulation sets
Description Code Qty Price each
ONE SIZE 1007355 1
For sealing connections of single main lines (flow and return) to twin outlet lines in the trench.Comprises insulating half-shells, stainless steel screws, plastic dowels and sealant.Only to be used with Uponor rubber end caps!
Insulation set for straight joints
Description Code Qty Price each
ONE SIZE 1021992 1
For sealing straight connections of Single and Twin pipes in the trench.Comprises insulating half-shells, stainless steel screws, plastic dowels and sealant.Only to be used with Uponor rubber end caps!
278.74
613.29
377.27
324.78
5 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Pre-Insulated Pipe Fittings, Components and Accessories
Reducer rings
Description Code Qty Price each
140/68 1007357 1
Used with 25mm and 32mm Thermo Mini and Supra pipes when connecting into insulation sets.
Entry sleeve, non-pressure waterproof
Description Code Qty Price each
68/90 1018266 1
175 & 200/250 1018268 1
140/175 1018269 1
With heat-shrinkable tube. Can be used wherever there is no pressurized water.
Shrinkable sleeve for chamber, order to lead-time
Description Code Qty Price each
175mm 1018380 1
200mm 1018381 1
Sealing tape 1018382 10
Heat-shrinkable tube for chamber.
Chamber with lid, order to lead-time
Description Code Qty Price each
6x140/175/200 1018326 1
8x140/175/200 1018327 1
Designed to accommodate pipe connections which cannot be made with an Uponor T-insulation set, e.g. for connecting Uponor Single to Twin pipes or for Uponor Quattro pipelines. Lead-time typically 2 weeks. Size 980 (d) x 685 (h) x 1660 (l), 50kg.
Pre-Insulated P
ipe System
27.75
41.46
55.30
45.42
1,112.39
1,242.22
18.88
32.60
34.47
(per/m)
5 7e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Pre-Insulated Pipe Fittings, Components and Accessories
Trench warning tape with imprint and symbols. Colour: red
Description Code Qty Price each
Warning tape roll 1018385 250m
To mark position of buried pipes. Red, tear-proof plastic tape imprinted with ‘Uponor’ and symbols for trench identification.
Supra Plus Connection Set
Description Code Qty Price each
25+32/68 1048697 1
40+50+63/140 1048699 1
75/175 1048700 1
90/175 1048701 1
110/200 1048702 1
Set includes Supra Plus Control Unit, 2 rubber end caps, 5m sensor cable, fixing screws, cable connections and full instructions. Control unit requires 230V supply.
Shrinkable tape
Description Code Qty Price per/m
255mm 1018378 30m
Shrinkable tape used for sealing damaged outer jacket.
Pre
-Ins
ulat
ed P
ipe
Syst
em
271.75
271.75
318.72
362.33
329.90
30.23
18.88
5 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
UFH Installer Course A two-day course at our purpose built facility in Lutterworth. The course is aimed at both new and experienced users of our products.
Day 1 gives a thorough understanding of applications of UFH in our theory suite.
Day 2 follows with practical exercises in our hands-on practical suite.
uPoints1000
The Uponor Training Academy was established to offer you a range of industry accepted courses. Starting with a comprehensive installer training course and moving through to design and control oriented workshops, encompassing techniques associated with Uponor Plumbing and Underfloor Heating products.
We are also able to offer bespoke workshops, tailored to suit your individual needs. Our main training academy is a purpose built facility close to Junction 20 off the M1, in the market town of Lutterworth.
Training Academy: 01455 551363
Uponor Head Office: 01455 550355
email: [email protected]
www.uponor.co.uk
Also see page 118 for other courses
available
e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 5 9
Underfloor Heating
Und
erfl
oor
Hea
ting
Product code information for Domestic and Commercial UFH systems, when choosing one of our underfloor heating systems, you benefit from convenient and reliable solutions.
• Uponor One Pack Range 60
• Uponor Self Attaching System 64
• Screed Floor System 67
• Timber Floor System 70
• Floating Floor System 71
• UFH Pipe, Manifolds & Accessories 75
• PEX 20 System 79
• Underfloor Heating Controls 87
6 2 Preparation ConnectionsLaying Loops
Underfl
oor Heating
PlayPlay
1 Loop
Description Zones LoopsControls
Wired Radio
WaterTemperature
Control uPoints Code Price per pack0-15m² 1 1 ü ü 2000 1059643
0-15m² 1 1 ü 2000 1059644
0-15m² 1 1 ü ü 2000 1059645
0-15m² 1 1 ü 2000 1059646
2 Loop
Description Zones LoopsControls
Wired Radio
WaterTemperature
Control uPoints Code Price per pack15-30m² 1 2 ü ü 2000 1059647
15-30m² 1 2 ü 2000 1059648
15-30m² 1 2 ü ü 2000 1059649
15-30m² 1 2 ü 2000 1059650
15-30m² 2 2 ü ü 2000 1059651
15-30m² 2 2 ü 2000 1059652
15-30m² 2 2 ü ü 2000 1059653
15-30m² 2 2 ü 2000 1059654
3 Loop
Description Zones LoopsControls
Wired Radio
WaterTemperature
Control uPoints Code Price per pack30-45m² 1 3 ü ü 2000 1059655
30-45m² 1 3 ü 2000 1059656
30-45m² 1 3 ü ü 2000 1059657
30-45m² 1 3 ü 2000 1059658
30-45m² 2 3 ü ü 2000 1059659
30-45m² 2 3 ü 2000 1059660
30-45m² 2 3 ü ü 2000 1059661
30-45m² 2 3 ü 2000 1059662
30-45m² 3 3 ü ü 2000 1059663
30-45m² 3 3 ü 2000 1059664
30-45m² 3 3 ü ü 2000 1059665
30-45m² 3 3 ü 2000 1059666
Uponor One Pack Systems
1,020.00
478.60
1,284.90
743.50
1,123.72
628.29
1,388.62
893.20
1,181.02
685.59
1,440.19
944.77
1,308.68
812.09
1,573.58
1,077.00
1,365.98
869.39
1,625.15
1,128.57
1,423.28
926.69
1,676.72
1,180.14
6 3Filling & Pressure System Start UpControls
Und
erfl
oor
Hea
ting
4 Loop
Description Zones LoopsControls
Wired Radio
WaterTemperature
Control uPoints Code Price per pack45-60m² 1 4 ü ü 2000 1059667
45-60m² 1 4 ü 2000 1059668
45-60m² 1 4 ü ü 2000 1059669
45-60m² 1 4 ü 2000 1059670
45-60m² 2 4 ü ü 2000 1059671
45-60m² 2 4 ü 2000 1059672
45-60m² 2 4 ü ü 2000 1059673
45-60m² 2 4 ü 2000 1059674
45-60m² 3 4 ü ü 2000 1059675
45-60m² 3 4 ü 2000 1059676
45-60m² 3 4 ü ü 2000 1059677
45-60m² 3 4 ü 2000 1059678
5 Loop
Description Zones LoopsControls
Wired Radio
WaterTemperature
Control uPoints Code Price per pack60-75m² 1 5 ü ü 2000 1059679
60-75m² 1 5 ü 2000 1059680
60-75m² 1 5 ü ü 2000 1059681
60-75m² 1 5 ü 2000 1059682
60-75m² 2 5 ü ü 2000 1059683
60-75m² 2 5 ü 2000 1059684
60-75m² 2 5 ü ü 2000 1059685
60-75m² 2 5 ü 2000 1059686
60-75m² 3 5 ü ü 2000 1059687
60-75m² 3 5 ü 2000 1059688
60-75m² 3 5 ü ü 2000 1059689
60-75m² 3 5 ü 2000 1059690
60-75m² 4 5 ü ü 2000 1059691
60-75m² 4 5 ü 2000 1059692
60-75m² 4 5 ü ü 2000 1059693
60-75m² 4 5 ü 2000 1059694
1,506.45
998.77
1,771.35
1,274.24
1,563.75
1,066.64
1,822.92
1,325.81
1,621.05
1,123.94
1,874.49
1,377.38
1,685.65
1,188.43
1,950.55
1,453.33
1,742.95
1,245.73
2,002.12
1,504.90
1,800.25
1,296.72
2,053.69
1,556.47
1,857.55
1,360.33
2,105.26
1,597.23
6 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Underfl
oor Heating
Remove work steps
28db impact noise reduction can remove the need for installing a resilient acoustic layer
Built in membrane removes the need for installing a polythene layer above the insulation
Reduce overall build programme
Save on cost of supplying and installing a resilient acoustic layer
Halve the time of installing an UFH system or halve the installation cost
28db impact noise reduction
Tested to DIN4109
Identical laboratory methods to
BSEN ISO 140-8:1998
Better than some of the leading acoustic underlay products
Potential for significant savings on supply and installation costs
Meets BSEN 1264 insulation requirements for floors with heated rooms below
ACOUSTIC & INSULATION QUALITIES
25 year manufacturing defect warranty
Design life in excess of 50 years in accordance with DIN 16892
Design pressure of 6 bar at 70oc
Available in coil sizes up to 640m
Oxygen diffusion barrier conforming to DIN 4726
Manufactured to ISO 9001 & 14001
3.3 billion metres of pipe sold since 1972
Conforms to EN ISO 15875
PEX-a 16x1.8mm UFH PIPE
PROJECT SAVINGS
Optimal Productivity and Performance
6 5e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Self Attach. Heat/Sound Insulation Roll
Description uPoints Code Qty Price per/m2
25mm Thermal and Sound Insulation 100 1007227 12
EPS 70 heat and sound insulation roll laminated with SAS hook and loop technology and pre-printed grid for easy laying of pipes. 28dB Impact noise reduction. Thermal Resistance 0.75m²K/W.Rolls are 1m x 12m.
Self Attach. Heat Insulation Slab
Description Code Qty Price per/m2
25mm Thermal Insulation 1048807 10
EPS 100 insulation slab with increased compressive strength for higher loadings. Laminated with SAS hook and loop technology and pre-printed grid for easy laying of pipes.Thermal Resistance 0.75m²K/W.Bi-folded slabs are 1m x 2m.
PEX Self Attaching Pipe
Description uPoints Code Qty Price per/m
16x1.8mm SAS Coil 600 1047624 240m
16x1.8mm SAS Coil 1600 1047625 640m
Polyethylene cross linked pipe with oxygen diffusion barrier bound with SAS hook and loop technology.
Uponor Self Attaching System
Und
erfl
oor
Hea
ting
NEW
NEW
NEW
Screed Floor Construction
Your benefits:
Reduced installation time and overall costs.
One person installation.
Simple or complex pipe layout without compromise.
Heating or cooling, domestic or commercial.
High retention force.
No fixing damage to insulation membrane.
Two grades of insulation available to suit the project.
Pipe & Accessories
8.16
10.07
1.96
1.96
6 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Underfl
oor Heating
Edging strip
Description Code Qty Price per/m
50m roll 1000080 50m
For use on solid screed floors as perimeter wall insulation, to reduce thermal bridging. Made of polyethylene with self adhesive backing and PE skirt providing tight seal between edge strip and insulation. Thermal resistance 0.22m2K/W. Supplied in 50m rolls, 150 x10mm HxD.
Compression Coupling
Description Code Qty Price each
¾”MTx ¾”MT 1006641 1
Made of plated brass 3/4” MT x 3/4 “ MT for repair to damaged sections of SAS 16 x 1.8mmpipe.
Uponor Spreader Bar with Pipe Leading Tool
Description Code Qty Price each
Pipe guide tool 1007179 1
Can be fitted between doorways so as to elevate SAS pipe from the ground during installation.
Uponor Self Attaching System - Pipe & Accessories
NEW
Did you know...Visit our Uponor youtube channel to watch the latest Self Attaching System video. www.youtube.com/user/UponorUKUponor Self Attaching System Challenge
Gloves
Description Code Qty Price each
Protective gloves 1048675 1
Uponor gloves recommended for use when handling self attaching pipe.
PlayPlay
32.76
1.23
3.94
2.95
6 7e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Und
erfl
oor
Hea
ting
Rolltec
Description Code Qty Price per/m2
50mm (1.52m2K/W) 1002046 8m²
Expanded polystyrene, laminated with a highly resistant fibre woven film, with pipe fixing grid pattern, for ease of pipe installation. Dimensions are 1000 x 2000mm.
Multi-foil
Description Code Qty Price per/m2
4mm foil insulation 1000017 60m²
Multi-layer reflective/printed insulating foil with pointed grid pattern. Designed for use directly above standard floor grade insulation to provide a protective layer and improve heat insulation and distribution into a heated screed. Supplied in 60 x 1m rolls. Thermal resistance 0.09m2K/W.
Pipe positioning plate 16
Description uPoints Code Qty Price per/m2
Pipe positioning plate 100 1016703 10m²
Castellated pipe positioning plate, designed to simplify the installation of 16mm underfloor heating pipes. For installation over suitable floor grade insulation. Dimensions of each panel 1447 x 900 x 18mm LxWxH of mould. Each pack covers 9.6m². Pipe spacing increments of 55mm/110mm/165mm/220mm/275mm/330mm
Uponor Screed Floor System
Floor Construction
Your benefits:
Secure pipe fixing method
Can be fixed directly to existing floor grade insulation
Can accommodate various pipe layouts and spacings
Low cost fixing system
Panels, Insulation, Positioning Plates
Staples
Clip Rail and Staples
15.58
4.85
9.48
6 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Underfl
oor Heating
Clamp Track 16 –20
Description Code Qty Price each
16-20mm 1000018 100m
Self-adhesive universal clip rail made of PPC, for Uponor pipe, 16mm to 20mm. Can be combined in any length, suitable for cutting to size. May be used with U-Clips 1005291 for a more secure fastening to your insulation. Allow 1m/2m2.Length of track: 1m. Width of track: approx. 50mm.Space between pipe holders: 50mm.
Clamp Track 16
Description Code Qty Price each
16mm 1013127 100m
Self-adhesive U-profile strip made of recycled material, with integrated pipe holder for 16mm MLCP and PEX. May be used with U-Clip 1005291 for a more secure fastening to your insulation. Allow 1m/2m2.Length of track: 2m. Width of track: approx. 40mmSpace between pipe holders: 25mm.
Uponor Screed Floor System - Edging Strip & Clamp Tracks
Edging strip
Description Code Qty Price per/m
50m Roll 1000080 50m
For use on solid screed floors as perimeter wall insulation, to reduce thermal bridging. Made of polyethylene with self adhesive backing and PE skirt providing tight seal between edge strip and insulation. Thermal resistance 0.22m2K/W. Supplied in 50m rolls, 150 x10mm HxD.
3.00
2.46
1.23
6 9e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Und
erfl
oor
Hea
ting
Uponor Screed Floor System - Clips & Accessories
Joint protection tube
Description Code Qty Price each
400mm 1013130 50
Made of PE-LD, with slit opening, for protection of tubes in area of screed floor joint.Diameter: 23mmLength: 400mmColour: black
Kombi Klip long
Description Code Qty Price each
16-20mm 1002297 300
Used for fixing 16-20mm underfloor heating pipe to most types of insulation. The barb length is 33mm and requires a minimum of 35mm insulation depth. For use with Uponor Kombi gun 1002295.
U-Clip 25
Description Code Qty Price each
25mm 1002018 100
Suitable for holding 25mm conduit in position. Length 55mm.
Kombi Klip short
Description Code Qty Price each
16-20mm 1002296 1000
Used for fixing 16-20mm underfloor heating pipe to Rolltec insulation or equivalent. The barb length is 22mm and requires a minimum of 26mm insulation depth. For use with Uponor Kombi gun 1002295.
Fastening Nail for Clamp Track
Description Code Qty Price each
65mm 1005291 500
Used to hold Clamp Track 16-20 in position or to provide additional fixing where required. Length 65mm.
0.15
0.25
1.14
0.08
0.08
7 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Underfl
oor Heating
Uponor Timber Floor System
Double heat emission plate
Description uPoints Code Qty Price each
U 16 HEP400 700 1034365 28
For use with timber suspended floors, with joists at 400mm centres, or floating floor panels 1002052. Double track for Uponor 16mm pipe at 200mm c/c. Plate dimension 1150 x 380mm. Each pack of 28 plates covers 15m2 (based on 80% floor coverage).
Unifoil
Description Code Qty Price per/m2
4.5mmx1.2mx25m 1002070 30m²
Aluminium foil insulation roll, combines insulation with reflective qualities for intermediate timber suspended floor applications. Lightweight, waterproof and corrosion resistant. For use in conjunction with Unifoil Clip 1002071. Thermal resistance 1.45m2K/W (including 50mm air space). Each 25 x 1.2m roll covers 20m2, with 50mm joists at 400mm centres. Not suitable for floor applications with ventilated voids.
Floor Construction
Heat Emission Plates benefits:
Can be laid directly on to existing traditional joists
Direct contact between plate and floor covering provides an efficient and highly responsive method of heat transfer
Options available for different joist pitches and sprung floor systems
Positioning Plates, Insulation & Clips
Unifoil Clip
Description Code Qty Price each
Unifoil Clip 1002071 100
For use in conjunction with Unifoil system 1002070. Fits over joists (2”) and holds the pipe over the Unifoil at 200mm c/c. Allow 5 clips/m2.
6.03
0.99
9.70
7 1e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Und
erfl
oor
Hea
ting
Uponor Floating Floor System
Floating floor panel 16
Description Code Qty Price each
1.2x1.2x50mm 1002052 6
Grooved polystyrene insulation panel for 16mm underfloor heating pipes at 200mm c/c. Panel dimensions 1200 x 1200 x 50mm LxWxH. Used together with Double Heat Emission Plate 1034365. Thermal resistance 1.52m2K/W. Each pack covers 8.64m2.
Double heat emission plate
Description uPoints Code Qty Price each
U 16 HEP400 700 1034365 28
For use with timber suspended floors, with joists at 400mm centres, or floating floor panels 1002052. Double track for Uponor 16mm pipe at 200mm c/c. Plate dimension 1150 x 380mm. Each pack of 28 plates covers 15m2 (based on 80% floor coverage).
Floor Construction
Your benefits:
Can be laid directly on to an existing floor
Expanded Polystyrene provides thermal insulation and improved performance
Can be easily adapted to suit different size and shaped rooms
Boards can be routed with ease so as to accommodate additional pipe grooves and channels.
Panel & Heat Emission Plates - 16mm
22.25
9.70
7 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Underfl
oor Heating
Uponor 12 Heat Emission Plate (HEP12)
Description Code Qty Price each
1180 x 110mm 1034358 30
Aluminium metal plates for use with Uponor 12 Floating feed/return panels. Single track for Uponor 12mm pipe.
Uponor Floating Floor System - System 12
PEX pipe, supplied in coils (12mm)
Description Code Qty Price per/m
12x2.0mm 1033889 50m
12x2.0mm 1033883 100m
12x2.0mm 1033891 400m
Wirsbo-evalPEX pipe, cross-linked polyethylene with oxygen diffusion barrier (to DIN4726) for use in underfloor heating applications. Allow 8m of pipe per m2 for the Floating Panel system, and 6m of pipe per m2 for the Fixed Panel system.
Uponor 12 Floating Panel (single)
Description Code Qty Price each
1200 x 750 x 15mm 1034338 10
Grooved polystyrene panel complete with heat emission plates glued to the top surface. Grooves c/c 125mm. Heat emission plates can be snapped off at end to reveal turns and two straight run grooves for feed/return. Allow approx.1.2 pcs/m2.
Floor Construction
Your benefits:
Can be laid directly on to an existing floor
Expanded Polystyrene provides thermal insulation and improved performance
Can be easily adapted to suit different size and shaped rooms
Boards can be routed with ease so as to accommodate additional pipe grooves and channels.
Finished floor coverings can be laid directly on top
Ultra low profile just 13mm in height!
Uponor Floating Floor System - System 12 Components
Uponor 12 Floating Panel (feed/return)
Description Code Qty Price each
1200 x 250 x 15mm 1034340 10
Grooved polystyrene panel for use where multiple feed pipes run to/from the manifold to the heated area. Grooves c/c 62.5mm.
Floating Panels
Fixed Panels
2.17
1.55
1.55
1.55
32.84
3.69
7 3e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Und
erfl
oor
Hea
ting
Uponor Floating Floor System - System 12 Components
Uponor 12 Fixed Panel (single)
Description Code Qty Price each
1215 x 175 x 13mm 1002021 10
13mm plywood panel bonded to an aluminium heat transfer plate with single groove c/c 175mm designed to take 12mm pipe. Allow approx. 4.7pcs/m2.
Uponor 12 Fixed Panels (multi)
Description Code Qty Price each
1265 x 1050 x 13mm 1002022 1
As per Uponor 12 Fixed Panel (single), although pre-assembled in groups of 6 and staggered. Assembled panel coverage approx.1.33m2.
Uponor 12 Fixed Panel (turn)
Description Code Qty Price each
1225 x 170 x 13mm 1002024 10
13mm plywood panel with multiple grooved turns to take 12mm pipe at c/c 175mm. Coverage approx. 1.21m2.
Uponor 12 Fixed Panel (feed and turn)
Description Code Qty Price each
1225 x 300 x 13mm 1002023 10
13mm plywood panel with multiple grooved turns and six straight run grooves for feed/return. Complete with 1 off tree piece to allow entry/exit of loops.
7.85
53.39
9.98
20.04
7 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Underfl
oor Heating
Uponor Floating Floor System - System 12 Components
Uponor 12 Silicone
Description Code Qty Price each
310ml 1002020 1
Tube of silicone heat transfer paste and adhesive for use with the Fixed Panel system. One tube coverage approx. 5m2.
PEX Pipe bend supports (Metal)
Description Code Qty Price each
12mm 1033974 1
These should be used for all pipe and pipe-in-pipe bends. Use the correct bend support to match the outer diameter of the pipe or of the conduit.
Eurocone Compression adapters (PEX Pipe)
Description Code Qty Price each
12x¾”Eurocone 1002051 1
Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT outlets of NV/LS/TM Manifolds.
Push 12 Water Temperature Control
Description Code Qty Price each
Push 12 1059834 1
230V actuator 1022244 1
Designed to fit directly onto an existing radiator circuit, offering control of both water and room temperature, and flow rate to a single loop of underfloor heating pipe. Serves up to 15m2 of floor area. Where electronic on-off control is required order a Push 12 actuator. Additional Eurocone ¾” compression adapters (2) are required for connection of UFH loop, depending on which pipe is used.
9.17
1.10
461.33
32.85
4.73
7 5e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Und
erfl
oor
Hea
ting
Uponor UFH System Pipe & Pipe Accessories
MLCP white, supplied coils
Description uPoints Code Qty Price per/m
16x2mm 250 1013463 50m
16x2mm 350 1013377 75m
16x2mm 500 1013378 100m
16x2mm 500 1013559 120m
16x2mm 900 1013371 200m
16x2mm 2500 1013380 500m
100% diffusion-resistant multi-layer composite (MLCP) pipe, five-layer (PE-RT – adhesive agent – continuously safety welded aluminium – adhesive agent – PE-RT). Manufactured to the strictest European standards and fully WRAS approved.
PEX Pipe, supplied in coils (16mm)
Description uPoints Code Qty Price per/m
16x1.8mm 80 1058856 80m
16x1.8mm 120 1058857 120m
16x1.8mm 240 1047622 240m
16x1.8mm 640 1047623 640m
Diffusion-resistant PEX pipes, four-layer (PEX – adhesive agent – oxygen barrier – adhesive agent), for underfloor heating and cooling applications.Maximum operating pressure is 6 bar.Maximum temperature operating 70°c.
PEX Pipe bend supports
Description Code Qty Price each
Metal 16mm 1009004 1
Bend supports are used where the underfloor heating PEX pipe is returning up from the floor towards the manifold. This creates a stable 90° bend making it easier for the installer to connect to the manifold.
1.96
1.96
1.96
1.96
1.96
1.96
1.30
1.30
1.30
1.30
1.59
7 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Underfl
oor Heating
Compact Control Pack V5
Controls the flow and temperature of water within UFH systems for a maximum heat load of 15kW.
Bolt together kit, which has been designed to fit neatly onto the UPONOR range of TM/LS/NV manifolds. Left and right hand installation possible.
The pack includes flow & return fittings for either MLCP or copper primary flow and return connections.
The thermostatic valve has a control head with a temperature adjustment range of 35 to 60oC.
6m A rated energy efficient pump and balancing valve.
12mm PEX
16mm PEX
20mm PEX
16mm MLCP
Compact Control Pack V5 ü ü ü ü
Uponor Heating Control Pack
Pre-assembled to the Uponor TM Manifold
Ready to be wall mounted straight from the box
High limit protection
6m A rated energy efficient pump and balancing valve
12mm PEX
16mm PEX
20mm PEX
16mm MLCP
Heating ControlPack ü ü ü ü
UFH Returns
Pump Flow
Boiler Flow
UFH Flow
Boiler Returns
7 7e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Und
erfl
oor
Hea
ting
Uponor UFH System Manifolds
Uponor TM Manifold
Description Code Qty Price each
1 loop extension set 1002197 1
2 loops 1002201 1
3 loops 1002202 1
4 loops 1002203 1
5 loops 1002204 1
6 loops 1002205 1
7 loops 1002206 1
8 loops 1002207 1
9 loops 1002208 1
10 loops 1002198 1
11 loops 1002199 1
12 loops 1002200 1
The Uponor TM Manifold includes Topmeters on the flow manifold for balancing and viewing circuit flow rates. Includes chrome plated flow and return headers pre-mounted on nickel plated manifold brackets with fill & drain points. Primary connections are 1” BSP and outlet connections are ¾” Eurocone. Designed for use with underfloor heating systems.Note: Thermal actuators & Eurocone compression adapters are supplied separately.
Compact Control Pack V5
Description Code Qty Price each
230v 1059842 1
Designed for the control of the water temperature and the flow rates in UFH with a maximumheat load of 15kW. The pack is designed to bolt onto the Uponor TM/LS Manifold. Incorporatesa high limit protection function preset to 60°C, a two port thermostatic injection valve, an Arated energy efficient 6m pump and balancing valve. Left or right hand installation possible.
Uponor Heating Control Pack
Description Code Qty Price each
2-Port 1059843 1
3-Port 1059844 1
4-Port 1059845 1
5-Port 1059846 1
6-Port 1059847 1
7-Port 1059848 1
8-Port 1059849 1
The pack is made up of the Uponor TM Manifold with a Compact Control Pack V5 prefixed to the manifold. The unit is ready to be wall mounted straight from the box. Designed for the control of water temperature and flow rates within UFH, for a maximum heat load of 15kW.
83.75
114.28
158.36
196.43
235.22
272.75
312.67
352.07
390.09
428.34
466.30
508.01
535.23
646.19
698.99
723.14
759.50
794.38
831.90
868.29
7 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Uponor UFH System Manifolds Accessories
Thermal Actuator
Description Code Qty Price each
24V for TM/LS Manifolds 1002053 1
230V for TM/LS Manifolds 1013006 1
With open/closed indicator, suitable for use with Uponor underfloor heating manifolds with 24V wired and radio room controls.
Uponor 1” Ball Valve
Description Code Qty Price each
1”FT x 1”MT 1059132 1
Uponor Manifold isolation valves for use with TM/LS/NV range.
Eurocone Compression adapters (MLCP)
Description Code Qty Price each
16x¾”FT 1058090 1
Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT outlets of NV/LS/TM Manifolds.
Eurocone Compression adapters (PEX Pipe)
Description Code Qty Price each
16x¾”FT 1057441 1
Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT outlets of NV/LS/TM Manifolds.
29.25
28.49
12.68
3.48
5.14
e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 7 9
PEX 20 Commercial Underfloor Heating
PEX
20
Com
mer
cial
Und
erfl
oor
Hea
ting
Our Industrial and Commercial PEX pipe, has a 50 year design life, over 30 years of service in the UK, requires less manifolds and being highly flexible makes it a fast and easy installation.
• PEX 20 Pipe & Pipe Accessories 80
• PEX 20 Manifolds 82
• Insulation & Heat Emission Plates 83
• PEX 20 System Accessories 85
8 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m8 0
Underfl
oor Heating - P
EX20
PEX 20 Underfloor Heating System - Pipe & Pipe Accessories
PEX Pipe, supplied in coils (20mm)PEX Q&E 20 x 2mm underfloor heating pipe. Five layer cross-linked polyethylene barrier pipe, manufactured in accordance with DIN 16892 and DIN 4726. Maximum operating pressure of 6 bar at 70oC.
PEX Pipe bend supportsBend supports are used where the underfloor heating PEX pipe is returning up from the floor towards the manifold. This creates a stable 90° bend making it easier for the installer to connect to the manifold.
Thermal ActuatorWith open/closed indicator, suitable for use with Uponor underfloor heating manifolds with 24V wired and radio room controls.
Eurocone compression adapters (PEX Pipe)Made from plated DZR brass. ¾”FT eurocone thread for connection to ¾”MT outlet ports of TM/LS Manifold.
Description Code Qty Price each
Metal 20mm 1009233 1
Description Code Qty Price per/m
20x2mm 1009229 60m
20x2mm 1033239 80m
20x2mm 1034538 100m
20x2mm 1009228 120m
20x2mm 1009230 240m
20x2mm 1009231 480m
Description Code Qty Price each
24V for TM/LS Manifolds 1002053 1
230V for TM/LS Manifold 1013006 1
Description Code Qty Price each
20x¾”FT - TM Manifold 1010629 1
2.17
2.17
2.17
2.17
2.17
2.17
2.47
29.25
28.49
3.83
8 1e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 8 1
Und
erfl
oor
Hea
ting
- P
EX20
PEX 20 Underfloor Heating System - Pipe Accessories
Manifold connection fitting with thermometer and airventFor connection to LS/TM Manifold. Can be fitted to left or right hand side of manifold.
Uponor 1” ball valveUponor Manifold isolation valves for use with TM/LS/NV range.
Compression couplingMade from DZR brass. May be used with Eurocone compression adapters for PEX pipe (¾”FT) to repair damaged sections of pipe.
Manifold cabinetHeight 850mm. Depth 100mm. Delivered with lockable front door (not shown).
Description Code Qty Price each
2-6 loops width 550mm 1034377 1
6-12 loops width 850mm 1009188 1
Description Code Qty Price each
AAV & Thermometer Gauge 1046886 2
Description Code Qty Price each
¾” 1006641 1
Description Code Qty Price each
1”FT x 1”MT 1059132 2
29.91
12.68
3.94
212.38
247.58
8 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Underfl
oor Heating - P
EX20
PEX 20 Underfloor Heating System - Manifolds
Uponor TM Manifold
Description Code Qty Price each
1 loop extension set 1002197 1
2 loops 1002201 1
3 loops 1002202 1
4 loops 1002203 1
5 loops 1002204 1
6 loops 1002205 1
7 loops 1002206 1
8 loops 1002207 1
9 loops 1002208 1
10 loops 1002198 1
11 loops 1002199 1
12 loops 1002200 1
The Uponor TM Manifold includes Topmeters on the flow manifold for balancing and viewing circuit flow rates. Includes chrome plated flow and return headers pre-mounted on nickel plated manifold brackets with fill & drain points. Primary connections are 1” BSP and outlet connections are ¾” Eurocone. Designed for use with underfloor heating systems.
Note: Thermal actuators & Eurocone compression adapters are supplied separately.
LS Manifold
Description Code Qty Price each
1 port extension set 1002181 1
2 port 1002182 1
3 port 1002183 1
4 port 1002184 1
5 port 1002185 1
6 port 1002186 1
7 port 1002187 1
8 port 1002188 1
9 port 1048274 1
10 port 1048275 1
11 port 1048276 1
12 port 1048277 1
The Uponor LS Manifold includes lock shield valves on the flow manifold for balancing the system. The manifold includes chrome plated flow and return headers pre-mounted on nickel plated brackets with fill & drain points. Primary connections are 1” BSP and outlet connections are ¾” Eurocone.
Note: Thermal actuators & Eurocone compression adapters are supplied separately.
Automatic Manifold By-Pass
Description Code Qty Price each
By-pass 1048278 1
Preset to 0.25 bar For connection between flow and return manifold (TM/LS). Complete with isolation valve for filling purposes.
83.75
114.28
158.36
196.43
235.22
272.75
312.67
352.07
390.09
428.34
466.30
508.01
91.74
108.75
146.29
179.30
213.10
245.59
280.59
314.87
347.03
378.28
409.68
441.76
63.15
8 3e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Und
erfl
oor
Hea
ting
- P
EX20
PEX 20 Underfloor Heating System - Insulation, Heat Emission Plates
Floating floor panel 20Grooved polystyrene insulation panel for PEX20 underfloor heating pipes at 300mm c/c. Panel dimensions 1200 x 790mm, available in two thicknesses 30 & 50. Used together with HEP300 heat emission plate 1009132. Allow 1.2 pieces/m2.
Rolltec
Description Code Qty Price per/m2
50mm (1.52m2K/W) 1002046 8m²
Expanded polystyrene, laminated with a highly resistant fibre woven film, with pipe fixing grid pattern, for ease of pipe installation. Dimensions are 1000 x 2000mm.
Multi-foil
Description Code Qty Price per/m2
4mm 1000017 60m²
Multi-layer reflective/printed insulating foil with pointed grid pattern. Designed for use directly above standard floor grade insulation to provide a protective layer and improve heat insulation and distribution into a heated screed. Supplied in 60 x 1m rolls. Thermal resistance 0.09m2K/W.
Description Code Qty Price each
30mm 1.2mx0.79m 1034347 5
50mm 1.2mx0.79m 1034352 3
Heat emission plate HEP300
Description Code Qty Price each
PEX 20 HEP300 1009132 40
For use with timber suspended floors, with joists at 300mm centres or floating floor panels. Single track for Uponor PEX20 pipe at 300mm c/c. Plate dimensions 1150 x 280mm. Each pack of 40 plates covers 16m2 (based on 80% floor coverage).
15.58
4.85
14.74
20.17
7.34
8 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Underfl
oor Heating - P
EX20
PEX 20 Underfloor Heating System - Heat Emission Plates & Accessories
Edging strip
Description Code Qty Price per/m
50m Roll 1000080 50m
For use on solid screed floors as perimeter wall insulation, to reduce thermal bridging. Made of polyethylene with self adhesive backing and PE skirt providing tight seal between edge strip and insulation. Thermal resistance 0.22m2K/W. Supplied in 50m rolls, 150 x10mm HxD.
Heat emission plate HEP411
Description uPoints Code Qty Price each
PEX 20 HEP411 650 1034491 20
For Junckers sprung floor battens spaced at 411mm centres. Double track for Uponor PEX20 pipe at 200mm c/c. Plate dimension 1150 x 405mm. Each pack of 20 plates covers 12.3m2 (based on 80% floor coverage).
PEX 20 - Heat emission plate 400mm
Description uPoints Code Qty Price each
PEX 20 HEP400 500 1034492 20
For use with timber suspended floors, with joists at 400mm centres. Double track for Uponor PEX20 pipe at 200mm c/c. Plate dimension 1150 x 380mm. Each pack of 20 plates covers 11m2 (based on 80% floor coverage).
Clamp Track 16 –20
Description Code Qty Price per/m
16-20mm 1000018 100m
Self-adhesive universal clip rail made of PPC, for Uponor pipe, 16mm to 20mm. Can be combined in any length, suitable for cutting to size. May be used with U-Clips 1005291 for a more secure fastening to your insulation. Allow 1m/2m2.Length of track: 1m. Width of track: approx. 50mm.Space between pipe holders: 50mm.
Clamp Track 20
Description Code Qty Price per/m
Without hooks 1009135 100pcs
With hooks 1034371 100pcs
For Uponor PEX pipe 20 x 2mm. Length 600mm. Clips at c/c 150mm. Clip rails snap together to form longer lengths. Delivered in bundles of 10 x 10 pieces clipped together. Allow 1-2 pcs/m2. Available with or without barb hooks. May be used with U-Clip 1005291. Please note : a pack is 60m.
1.23
12.79
10.10
3.00
1.40
1.31
8 5e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Und
erfl
oor
Hea
ting
- P
EX20
PEX 20 Underfloor Heating System - Accessories
Fastening Nail for Clamp Track
Description Code Qty Price each
65mm 1005291 500
Used to hold Clamp Track 16-20 in position or to provide additional fixing where required. Length 65mm.
Joint protection tube
Description Code Qty Price each
400mm 1013130 50
Made of PE-LD, with slit opening, for protection of tubes in area of screed floor joint.Diameter: 23mmLength: 400mmColour: black
Kombi Klip short
Description Code Qty Price each
16-20mm 1002296 1000
Used for fixing 16-20mm underfloor heating pipe to Rolltec insulation or equivalent. The barb length is 22mm and requires a minimum of 26mm insulation depth. For use with Uponor Kombi gun 1002295.
Kombi Klip long
Description Code Qty Price each
16-20mm 1002297 300
Used for fixing 16-20mm underfloor heating pipe to most types of insulation. The barb length is 33mm and requires a minimum of 35mm insulation depth. For use with Uponor Kombi gun 1002295.
U-Clip 25
Description Code Qty Price each
25mm 1002018 100
Suitable for holding 25mm conduit in position. Length 55mm.
0.08
1.14
0.08
0.15
0.25
8 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Everyone perceives temperature differently. During summer and winter, maximum thermal comfort can only be reached if the environmental temperatures satisfy the needs of the user and not the other way round.
This requires a flexible and sensitive control system. Uponor offers exactly this, ranging from room thermostats to controllers and heating manifolds, all from one source.
A feeling of well-being in our surroundings can only be achieved when all components fit perfectly with each other.
The innovative systems from Uponor for individual room and supply temperature control, combined with Uponor radiant heating and cooling solutions, provide comfortable ambient temperatures all year round, together with ease of use.
Easy control for individual comfortIdeal room temperatures every month of the year
Control cycle for thermal comfort
Patented technology unique to Uponor.
Auto balance technology does it all. And it goes on balancing through sun, wind, and frost; through the changing seasons; and through the household’s changing lifestyle and usage patterns, keeping room temperatures ideal every month of the year.
8 7
Uponor Heating & Cooling Controls
Hea
ting
& C
oolin
g C
ontr
ols
Uponor individual room and supply temperature controls, combined with our radiant heating and cooling solutions, provide comfortable ambient temperatures all year round.
• Compact Control Pack V5 88
• VPG & PPG Control Sets 89
• Water Temperature Controls 90
Room Control Components
• Wireless 92
• 12V Wired 94
• Wireless & 12V Accessories 95
• 12V STATPACKS 97
• 230V Wired Controls & Accessories 98
• 230V STATPACKS 100
8 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Heating &
Cooling C
ontrols
Uponor Water Temperature Control - Compact Control Pack Version 5
Compact Control Pack V5
Description Code Qty Price each
230v 1059842 1
Designed for the control of the water temperature and the flow rates in UFH with a maximum heat load of 15kW. The pack is designed to bolt onto the Uponor TM/LS Manifold. Incorporates a high limit protection function preset to 60°C, a two port thermostatic injection valve, an A rated energy efficient 6m pump and balancing valve. Left or right hand installation possible.
Uponor Heating Control Pack
Description Code Qty Price each
2-Port 1059843 1
3-Port 1059844 1
4-Port 1059845 1
5-Port 1059846 1
6-Port 1059847 1
7-Port 1059848 1
8-Port 1059849 1
The pack is made up of the Uponor TM Manifold with a Compact Control Pack V5 prefixed to the manifold. The unit is ready to be wall mounted straight from the box. Designed for the control of water temperature and flow rates within UFH, for a maximum heat load of 15kW.
535.23
646.19
698.99
723.14
759.50
794.38
831.90
868.29
8 9e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Hea
ting
& C
oolin
g C
ontr
ols
Uponor Water Temperature Control - VPG & PPG Control Sets
VPG-10 with actuator
Description Code Qty Price each
PPG-20 1059839 1
Designed for control of both water temperature and flow rates in secondary underfloor heating systems, in both domestic and commercial applications. Supplied pre-assembled and ready for direct connection to all Uponor UFH manifolds. Includes 6m A rated energy efficient pump and valve actuator with end switch. Maximum 15kW heat load.
Description Code Qty Price each
VPG-10 with actuator 1061091 1
Description Code Qty Price each
PPG-30 1059840 1
Designed for control of both water temperature and flow rates in secondary underfloor heating systems, in both domestic and commercial applications. Supplied pre-assembled and ready for direct connection to all Uponor UFH manifolds. Includes a 6m A rated energy efficient pump and a secondary water temperature immersion pocket. 3 port blending valve Motor and controller sold separately. Maximum 20kW heat load.
Designed for control of both water temperature and flow rates in secondary underfloor heating systems, in both domestic and commercial applications. Supplied pre-assembled and pre-wired with a mixing valve actuator and Climate controller. The PPG - 30 is supplied ready for remote coupling to multiple manifolds from a central location. Includes an 8m A rated energy efficient pump as well as a secondary water temperature immersion pocket. Direct coupling to manifold is possible using adapters 1059841. A separate 24V power supply is required for mixing valve motor (24V transformer 1048762). Maximum 30kW heat load.
PPG-20
PPG-30
634.28
695.14
1,957.78
9 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Heating &
Cooling C
ontrols
Uponor Water Temperature Controls
Actuator 24V with 0-10V Signal
Description Code Qty Price each
24V 1002356 1
For motorised water temperature control when used with the Climate Controller. To be used in conjunction with either 1048762 or 1048764 24v transformer.
3-Port mixing valve
Description Code Qty Price each
¾“r Kv4 1002013 1
¾“s Kv6.3 1002014 1
1“r Kv8 1002015 1
1“s Kv12 1002016 1
1¼ “s Kv18 1002017 1
Made from DZR brass. Rotary shoe valve used to blend the system water to the required temperature.
Climate Controller
Description Code Qty Price each
Climate Controller 1047844 1
Weather compensated or set point water temperature controller for radiant heating and cooling systems. Features an installation wizard for a fast and easy setup. Can also communicate with the Wireless Zone controller in an integrated and intelligent way via its bus connection.
Climate Controller Extended
Description Code Qty Price each
Climate Controller 1047845 1
Features Wireless humidity sensor and Wireless controller antenna so as to enable dew point monitoring for radiant cooling.
Heating and cooling
82.72
82.72
90.07
98.89
107.62
207.25
523.99
719.23
9 1e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Hea
ting
& C
oolin
g C
ontr
ols
Uponor Water Temperature Controls
Cable Transformer Power Supply
Description Code Qty Price each
24V Transformer 1048762 1
24v transformer for use with Actuator 1002356 and Climate Controller.
Plug Transformer Power Supply
Description Code Qty Price each
24V Transformer 1048764 1
230V/24V transformer for use with Actuator 1002356 and C-46 Controller.
Wireless Controller Antenna
Description Code Qty Price each
Antenna 1046116 1
Enables communication between the climate controller and wireless sensors. Please note that the wireless antenna does not need to be fitted when using the climate controller in conjunction with the wireless zone controller.
Push 12 Water Temperature Control
Description Code Qty Price each
Push 12 1059834 1
230V actuator 1022244 1
Designed to fit directly onto an existing radiator circuit, offering control of both water and room temperature, and flow rate to a single loop of underfloor heating pipe. Serves up to 15m2 of floor area. Where electronic on-off control is required order a Push 12 actuator. Additional Eurocone ¾” compression adapters (2) are required for connection of UFH loop, depending on which pipe is used.
Wireless Humidity Sensor
Description Code Qty Price each
Humidity Sensor 1047846 1
Wireless humidity sensor used for dew point calculation so as to prevent condensation occurring in cooling mode.
461.33
32.85
21.08
21.08
93.75
127.16
9 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Heating &
Cooling C
ontrols
Uponor Room Control Components - Wireless
Wireless Zone Controller and Interface Kit
Description uPoints Code Qty Price each
Zone Control Kit 700 1045564
NEW! Featuring Dynamic Energy Management - up to 12% energy saving!Comes complete with 12- channel wireless controller, interface unit, external antenna, cables for connections and mounting material.
Wireless Zone Controller
Description uPoints Code Qty Price each
Controller 400 1045567 1
NEW! Featuring Dynamic Energy Management - up to 12% energy saving!Designed for receiving and interpreting radio signals from a maximum of 12 wireless thermostats. In built 230-24V transformer, two relays and can control up to 14 x 24V actuators. Time controlled setback is available via the Wireless Zone Interface Controller (1046083).
Wireless Zone Interface Controller
Description Code Qty Price each
Remote Access Module 1046485 1
NEW! Featuring Dynamic Energy Management - up to 12% energy saving!The Interface can be used to control a maximum of three Wireless Zone Controllers (1045567). The unit offers 5 temperature setback programs and comes complete with cable for connection to the controller. Features include holiday mode, assignment of room names, display of all setpoint and actual room temperatures and valve and pump exercise functions.
Wireless Controller Remote Access Module
Description uPoints Code Qty Price each
Interface 250 1046083 1
Allows remote access to switch between Eco or Comfort settings. Very useful for holiday homes. Gives updates; indoor temperature and outdoor temperature - requires a Wireless Public Thermostat (1045572)
Note: will require a SIM card, not provided.
PlayPlay
www.youtube.com/user/UponorUKDynamic Energy Management (DEM) Controls - Virtual City.wmv
Did you know...Did you know the Radio Zone Controller can be connected to the Climate Controller via BUS communication. This enables 2 way communication allowing shared use of sensors and thermostats for improved performance.
408.18
294.02
204.62
712.69
9 3e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Hea
ting
& C
oolin
g C
ontr
ols
Uponor Room Control Components - Wireless
Wireless Digital Thermostat
Description Code Qty Price each
White 1000502 1
Silver 1000504 1
Grey 1046114 1
Push button operation for temperature control from +5°C to +35°C. Allows the user to view the current ambient temperature or the set point temperature via the LCD display. Two standard AAA batteries are included.
Mounting Kit for Wireless Digital Thermostat
Description Code Qty Price each
Mounting Kit - White 1000503 1
Mounting Kit - Silver 1000505 1
Mounting Kit - Grey 1046115 1
Table stand and wallplate with adhesive sticker for sticking to smooth surfaces.
Wireless Dial Thermostat
Description Code Qty Price each
White 1058385 1
The dial thermostat is an easy-to-use wireless thermostat that incorporates conventional thumb wheel control to adjust the room temperature set point. 2x AAA batteries included.
Wireless Public Thermostat
Description Code Qty Price each
White 1045572 1
This is a tamper proof thermostat designed for public areas or for user/occupant restriction purposes. It can also be used as a wireless outdoor sensor for the Climate Controller. Can also be connected to a floor sensor ( 1000538 ).
49.32
70.85
63.67
80.58
70.19
4.52
12.28
6.04
9 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Heating &
Cooling C
ontrols
Uponor Room Control Components - 12V Wired
Wired Zone Controller
Description Code Qty Price each
Controller 1000534 1
Wiring and relay centre for controlling of up to 14 x 24V actuators via a maximum of 12 wiredthermostats. The unit has an in-built 230-24V transformer with two relays. For time controlledsetback the Wired Timer should be used.
Wired Controller Timer
Description Code Qty Price each
White 1048013 1
The Wired Timer offers two timed setback programs . The unit has a large LCD screen with a simplified visual display of Comfort or ECO setting. Also has a facility for external forced ECO mode available via the remote access module (1046485).
Wired Dial Thermostat
Description Code Qty Price each
White 1058387 1
Easy-to-use thermostat that incorporates conventional thumb wheel control to adjust the air temperature set point. The setting range can be limited mechanically by adjusting pins under the thermostat dial. A floor sensor can be wired to the thermostat which will give the it the ability to control the minimum or maximum floor temperature (1000538).
Wired Digital Thermostat
Description Code Qty Price each
White 1048011
Digital wired thermostat with large LCD screen and simple menu navigation. For time control use in conjunction with the Wired Timer (1048013). Also includes Uponor’s world first “Auto-balance” patented technology (up to 12% energy saving!)
Wired Public Thermostat
Description Code Qty Price each
White 1000537 1
The thermostat dials are hidden by a cover which needs to be removed before adjustments can be made. The Public Thermostat also allows control over the minimum or maximum floor temperature when used with a floor sensor (1000538).
60.58
27.85
27.85
82.06
139.61
9 5e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Hea
ting
& C
oolin
g C
ontr
ols
Uponor Room Control Components - 12V Wired
Wired Programmable Digital Thermostat
Description Code Qty Price each
White 1048012 1
Programmable digital thermostat with 5/2, 6/1 & 7 day groups for programming between ECO and COMF setting. Includes Uponor’s world first “Auto-balance” patented technology (up to 12% energy saving!)
15m Installation Cable
Description Code Qty Price each
Cable 1000515 1
15m twisted pairs cable to connect from the Interface to the controller, from one controller to another or to be used as an extension for the antenna cable.
Cable Kit
Description Code Qty Price each
Kit 1000514 1
Spare part cable kit consisting of:
• 3m Cable for connecting from the antenna to the wireless zone controller
• 0.3m Cable for connecting from the antenna to wireless zone controller
• 2m Cable for connecting from the Interface I-76 wireless zone controller
Uponor Room Control Components - Wireless & 12V Wired Accessories
Thermal ActuatorWith open/closed indicator, suitable for use with Uponor underfloor heating manifolds with 24V wired and wireless room controls.
Description Code Qty Price each
24V for TM/LS Manifolds 1002053 1
Did you know...Did you know that our 12v and Radio DEM controls can work in either heating or cooling mode.
Ideal for both heating and cooling
29.25
67.31
32.78
10.35
9 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Heating &
Cooling C
ontrols
Remote Floor Sensor
Description Code Qty Price each
4m 1000538 1
Floor sensor attached to a 4m cable for use with the thermostats to enable control over the maximum or minimum floor temperature.
Thermostat Wall Plate
Description Code Qty Price each
90 x 90mm 1000539 1
For use with wireless/wired dial and public thermostats to cover standard wall boxes.
Uponor Room Control Components - Wireless & 12V Wired Accessories
22.79
2.20
9 7e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Hea
ting
& C
oolin
g C
ontr
ols
column 1 column 2 column 3 column 4 column 5 column 6
Choose your pack...• Select the number of zones your heating system is controlling from column 1.
• Column 2 and column 3 list the available thermostat combinations for each pack.
Read across the table and select the combination required.
• Column 4 and column 5 list the pack product code and pricing*.
• Finally add the number of manifold actuators and 12V thermostat remote sensors to your
chosen STATPACK.
* Note: Every pack includes a wiring centre for controlling up to 12 zones and 14 loops. Packs also contain an Wired Timer for setback temperature control.
Underfloor Heating Systems - ControlsUponor Controls - 12V STATPACKS
Digital wired thermostat with large LCD screen and simple menu navigation. Also Includes Uponor’s world first “Auto-balance” patented technology (up to 12% energy saving!)
Digital Wired Thermostat
White 1048011
Easy-to-use thermostat that incorporates conventional thumb wheel control to adjust the air temperature set point. The setting range can be limited mechanically by adjusting pins under the thermostat dial. A floor sensor can be wired to the thermostat which will give it the ability to control the minimum or maximum floor temperature.
Wired Dial Thermostat
Zones Dial Stat Digital Stat uPoints Pack Code Pack Price
2 2 - 1000 1057095
- 2 1000 1057096
3 3 - 1000 1057097
- 3 1000 1057098
4 4 - 1000 1057099
- 4 1000 1057100
5 5 - 1000 1057101
- 5 1000 1057102
6 6 - 1000 1057103
- 6 1000 1057104
7 7 - 1000 1057105
- 7 1000 1057106
8 8 - 1000 1057107
- 8 1000 1057108
White 1058387
List (£)
249.65
308.56
274.72
363.09
299.79
417.61
324.86
472.12
349.93
526.65
375.01
581.18
400.07
635.71
9 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Heating &
Cooling C
ontrols
230V Wiring Centre
Description Code Qty Price each
White 230V 1047456 1
For controlling up to 8 room stats and 16 manifold actuators. Includes two volt free relays for pump and boiler control. Night setback facility when used with remote time clock.
230V Digital Programmable Thermostat
Description Code Qty Price each
White 230V 1058425 1
Modern slim design only 13mm depth after installation. Energy saving feature calculates heat up time of system. Includes holiday mode, temporary over-ride and specified duration, 5/2 or 7 day programme, floor temperature control, lock facility, status display on current thermostat mode.
230V Digital Dial Thermostat
Description Code Qty Price each
White 230V 1047457 1
Multi-purpose LCD and dial thermostat with remote sensor and setback facility.Includes, air and remote sensing or remote sensing only, regulation and protection of floor temperature, lock facility, status display on current thermostat mode.
Uponor Room Control Components - 230V Wired Controls & Accessories
Remote Sensor
Description Code Qty Price each
3m 1047459
Optional 3m long sensor for control and regulation of remote temperatures of remote temperature.
230V Thermal ActuatorsControlled by the 230V wiring centre for loop and zone regulation. One required per manifold port/loop
Description Code Qty Price each
230V Thermal Actuator, TM/LS Manifold 1013006 1 28.49
22.79
41.23
64.79
139.61
9 9e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Hea
ting
& C
oolin
g C
ontr
ols
Uponor Room Control Components - 230V Wired Controls & Accessories
230V Programmable thermostat
Description Code Qty Price each
White 1002131 1
5/2 day programmable thermostat with up to 6 time and temperature changes each day. Battery powered.
230V Time Clock
Description Code Qty Price each
White 1002133 1
230V single channel time switch with volt free output. Used with the wiring centre to provide either 7 day, 24hr or 5/2 day temperature setback on the digital dial thermostat. Program copy and over-ride features included with a back-light display.
Junction box
Description Code Qty Price each
White 1002130 1
12 way connector
Motorised 2 port zone valve
Description Code Qty Price each
230V 1002047 1
230V power open/spring return zone valve, complete with auxiliary switch.
Single zone control pack
Description Code Qty Price each
Boxed Zoned Control Set 1002134 1
Boxed zoned control pack comprising of programmable thermostat, 2 port zone valve and 12 way wiring box, offering time and temperature control to single zone underfloor heating systems.
115.14
89.16
14.92
91.77
193.00
1 0 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m1 0 0
Choose your pack...• Select the number of zones your heating system is controlling from column 1.
• Column 2 and column 3 list the available thermostat combinations for each
pack. Read across the table and select the combination required.
• Column 4 and column 5 list the pack product code and pricing*.
• Finally add the number of manifold actuators and 230V thermostat remote sensors to your
chosen 230V STATPACK.
* Note: every pack includes a wiring centre for controlling up to 8 zones and 16 loops. Packs with Digital Dial thermostats also include a single channel time clock for timed setback temperature control.
Underfloor Heating Systems - Controls
column 1 column 2 column 3 column 4 column 5 column 6
Zones Digital Dial Stat Programmable Digital Stat uPoints Pack Code
2 2 - 1000 1047700
- 2 1000 1047701
3 - 1000 1047702
3 - 3 1000 1047703
2 1 1000 1047704
4 - 1000 1047705
4 - 4 1000 1047706
3 1 1000 1047707
2 2 1000 1047708
5 - 1000 1047709
5 - 5 1000 1047710
4 1 1000 1047711
3 2 1000 1047712
6 - 1000 1047713
6 - 6 1000 1047714
4 2 1000 1047715
3 3 1000 1047716
7 - 1000 1047717
7 - 7 1000 1047718
5 2 1000 1047719
4 3 1000 1047720
8 - 1000 1047721
- 8 1000 1047722
8 6 2 1000 1047723
5 3 1000 1047724
4 4 1000 1047725
Uponor Controls - 230V STATPACKS
Heating &
Cooling C
ontrols
Pack Price
List (£)
280.11
322.51
317.21
380.81
338.41
354.31
439.13
375.52
396.73
391.42
497.44
412.62
433.83
428.53
555.76
470.94
492.14
465.63
614.07
508.05
529.24
502.74
672.37
545.16
566.36
587.56
1 0 1e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 1 0 1
Energy Systems
Ener
gy S
yste
ms
Collector pipes for geothermal renewable energy heat pump systems. Suitable for city or rural projects, Uponor Energy Systems will bring outside natural energies inside your home. The system can be used in conjunction with all Uponor systems; Pre-insulated, Plumbing, Underfloor heating and Cooling.
• Energy System Collector Pipe 102 • Energy System Fittings & Accessories 102
1 0 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Wall elbow
Description Code Qty Price each
1002166 1
40mm. L = 1m
Single collector for ground energy
Description Code Qty Price each
40x2.4 100m 1048224 1
40x2.4 200m 1048225 1
40x2.4 250m 1048227 1
40x2.4 300m 1048226 1
40x2.4 400m 1048228 1
40x2.4 500m 1048229 1
Rubber hood
Description Code Qty Price each
1002163 1
Pressure sealed 138-168mm
Tee pipe with air bleeder
Description Code Qty Price each
1002164 1
40mm with air bleeder
Energy Systems - (Collector Pipe for GSHPs)
Energy Systems
Energy Systems - Fittings & Accessories
Pipe available to order on lead time, typically 2 weeks.
100.57
221.32
442.66
663.98
553.33
885.32
1,106.64
30.32
26.89
1 0 3e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Snap-in lid
Description Code Qty Price each
1002367 1
315mm for inspection chamber
Return elbow
Description Code Qty Price each
1002160 1
With mounting ring for bottom weight or hauling rope. Pipe connection 40mm.
Round bottom weight
Description Code Qty Price each
1002167 1
For lowering the return collector into the bore hole> Ø 85mm x 0.5 long = 12kgMultiple weights can be used.
Energy Systems - Fittings & Accessories
Ener
gy S
yste
ms
Tubolit insulation DG 42/9
Description Code Qty Price each
1002162 1
2 metres for 40mm pipe
6.92
48.22
37.52
5.75
1 0 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Energy Systems - Fittings & Accessories
Energy Systems
Straight coupling
Description Code Qty Price each
40mm 1002138 1
MDPE Compression Fitting
Female thread adapter
Description Code Qty Price each
40mm x1” 1002146 1
40mm x1¼” 1002147 1
MDPE Compression Fitting
Female thread take off tee
Description Code Qty Price each
40mmx1”x40mm 1002143 1
40mmx1¼”x40mm 1002368 1
MDPE Compression Fitting
End plug
Description Code Qty Price each
40mm 1002145 1
MDPE Compression Fitting
Equal tee
Description Code Qty Price each
40mm 1002142 1
MDPE Compression Fitting
19.36
19.36
32.84
35.85
39.46
17.32
45.99
1 0 5e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Energy Systems - Fittings & Accessories
Ener
gy S
yste
ms
90O Elbow
Description Code Qty Price each
40mm 1002141 1
MDPE Compression Fitting
Male thread adapter
Description Code Qty Price each
40mmx1” 1002139 1
40mmx1¼” 1002140
MDPE Compression Fitting
Female thread elbow
Description Code Qty Price each
40mmx1¼” 1002144 1
MDPE Compression Fitting
24.50
32.89
17.61
19.36
1 0 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m1 0 6
Tools and Accessories
Q&E TOOL DEALS MLCP TOOL DEALS
Contact your Uponor representative or speak
to your local plumbers or builders merchant today
for more details.
www.uponor.co.uk
Milwaukee Expander Tool Set
1057166
Mini 32 Pressing Tool for MLCP
1007096
1 0 7e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 1 0 7
Tools and Accessories
Tool
s an
d A
cces
sori
es
Using our tools and accessories ensures full system warranty. That means we have tested the entire system range of pipes, fittings, and pressing jaws as a complete system. Special deals available on tool purchases and hire. Contact your Uponor representative or speak to your local plumbers and builders merchant for more details.
Plumbing
• MLCP Tools 108
• PEX Tools 112
Underfloor Heating
• MLCP Tools 114
• PEX Tools 115
• General Tools 116
1 0 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Plumbing - MLCP Tools and Accessories
MLCP pliers
Description Code Qty Price each
Pipe cutting pliers 12-20mm 1006636 1
Spare blades for cutting pliers 1006637 1
Special pipe cutting pliers for Uponor MLCP with an outer diameter of 12-20mm; with corrugated tube cutting attachment.
Pipe cutter
Description Code Qty Price each
Pipe cutter 14-32mm 1013719 1
Spare cutting blade 1013721 1
Pipe cutter for use with Uponor MLCP.
Pipe cutting tool
Description Code Qty Price each
Pipe cutting tool 25-63mm 1006634 1
Spare cutting disc 1006635 1
Pipe cutting tool 50-75mm 1014171 1
Spare cutting disc 1014173 1
Cutting tool for use with Uponor MLCP.
Bevelling tool 12-25
Description Code Qty Price each
12mm 1015837 1
16mm 1006830 1
20mm 1015749 1
25mm 1015756 1
Installation tool for the bevelling of Uponor MLCP. Supplied with turning handle (can also be used as cordless screwdriver attachment, see instructions).
Bevelling tool 32-75
Description Code Qty Price each
32mm 1015762 1
40mm 1006638 1
50mm 1015808 1
63mm 1014339 1
75mm 1014344 1
Installation tool for the bevelling of Uponor MLCP. Supplied with turning handle (can also be used as cordless screwdriver attachment, see instructions).
Plum
bing Tools and Accessories
21.50
8.64
28.07
2.44
51.48
3.97
23.76
8.41
8.71
10.03
13.81
20.60
23.44
28.83
37.89
31.05
5.16
1 0 9e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Plumbing - MLCP Tools and Accessories
3-size bevelling tool
Description Code Qty Price each
16/20/25mm 1015739 1
Installation tool for the bevelling of Uponor MLCP.
Inside bending spring
Description Code Qty Price each
12mm 1013726 1
16mm 1013729 1
20mm 1013734 1
25mm 1013737 1
32mm 1013739 1
Bending spring for use with Uponor MLCP.
Outside bending spring
Description Code Qty Price each
16mm 1006640 1
20mm 1013792 1
25mm 1013794 1
Bending spring for use with Uponor MLCP.
Bending tool 16-32mm
Description Code Qty Price each
16,20,25,32 1013773 1
Bending tool for producing series of identical curves in Uponor MLCP, supplied in carrying case complete with set of bending inserts.
Battery pressing tool UP 75Supplied in carrying case, complete with battery and charger unit. Range of application: 14-110mm.
Description Code Qty Price each
Press tool 1006827 1
Spare Battery 12V/3Ah 1006949 1
Spare re-charging unit 1006950 1
Plu
mbi
ng T
ools
and
Acc
esso
ries
2.93
1.87
1.91
3.18
3.93
2.61
2.34
3.21
10.75
149.03
947.44
57.21
61.51
1 1 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Plumbing - MLCP Tools and Accessories
Pressing jawsJaws for use with Uponor MLCP press fittings, for use with UP75.
Pressing chainPressing chain for use with 63-110mm Uponor MLCP Press Fittings, to be used inconjunction with UP75 pressing tool and base pressing unit.
Description Code Qty Price each
16mm 1007084 1
20mm 1007086 1
25mm 1007087 1
32mm 1007088 1
40mm 1015768 1
50mm 1015792 1
Description Code Qty Price each
63mm pressing chain 1046541 1
75mm pressing chain 1046542 1
90mm pressing chain 1046543 1
110mm pressing chain 1046544 1
Base pressing unit
Description Code Qty Price each
63-110mm base pressing unit 1046545 1
Mini jaw setTo be used with Mini 32.Note: Cannot be used with Uponor MLCP Modular fittings.
Mini 32 Pressing Tool for MLCPAn alternative to the existing UP75 battery pressing tool, the Mini 32 can press all existing metal and composite press fittings from 12mm up to 32mm, without the need for external power (External power needed to charge batteries).
Note: Cannot be used with Uponor MLCP Modular fittings.
Description Code Qty Price each
Press Tool (excl. jaw sets) 1007096 1
Spare Battery 9.6V/2.0Ah 1015703 1
Spare re-charging unit 1006950 1
Description Code Qty Price each
12mm 1007089 1
16mm 1007091 1
20mm 1007093 1
25mm 1007094 1
32mm 1007095 1
Plum
bing Tools and Accessories
58.23
58.23
58.23
58.23
110.12
115.85
385.87
460.74
575.93
691.12
167.02
63.29
63.29
63.29
67.48
67.48
601.85
60.18
61.51
1 1 1e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Inserts for manual pressing toolFor fitting to the manual pressing tool for the handling of 12-20mm Uponor MLCP press fittings.
Description Code Qty Price each
12mm 1002128 1
16mm 1015777 1
20mm 1015780 1
Pressure test plugReusable plug with ½“ FT designed for pressure-testing of Uponor MLCP installations.
Tool set 63–110
Set consists of pipe cutting tool and bevelling tool suitable for use with Uponor MLCP (outer diameter: 63-110mm). Supplied in carrying case.
Pipe straightenerFor the fast, simple, straight alignment of Uponor MLCP supplied in coils (14mm to 32mm). Adjustable to the desired size. Can be used in combination with the Uponor MLCP uncoilers.
Description Code Qty Price each
12mm 1013752 10
16mm 1013756 10
20mm 1013760 10
25mm 1013762 10
32mm 1013764 5
40mm 1013765 2
Description Code Qty Price each
63-110mm 1014322 1
Description Code Qty Price each
Pipe straightner 1010512 1
Plumbing - MLCP Tools and Accessories
Manual pressing toolDesigned for use with Uponor MLCP 12-20mm press fittings (in conjunction with inserts for manual pressing tool). Supplied in carrying case without inserts for pressing tool.
Description Code Qty Price each
12-20mm 1015764 1
Plu
mbi
ng T
ools
and
Acc
esso
ries
29.97
31.46
31.46
2.91
1.67
1.73
1.80
4.04
10.61
152.81
444.71
156.41
1 1 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Plum
bing Tools and Accessories
Plumbing - PEX Tools and Accessories
Plastic pipe cuttersCost effective PEX pipe cutters to leave the perfect jointing finish.
Description Code Qty Price each
Pipe cutter 12-28mm 1001369 1
Pipe cutter 12-40mm 1001370 1
Milwaukee expander tool setIncludes 1x 230V, 50Hz fast battery charger, 2x14.4V /1.5Ah Li-ion Batteries, 1x 100g tube of Molykote tool lubricant, 1x operation manual, 1x lightweight plastic case. Expander heads included.
Graphite paste 30gm tube
NEW
Pipe and conduit cutterThis tool is specially designed for cutting pipe-in-conduit. Conduit cutter is guarded to prevent damage to the pipe inside the conduit. Maximum pipe diameter 22mm.
Description Code Qty Price each
M12 Expander tool Set 1057166 1
Spare 16mm head 1057172 1
Spare 20mm head 1057173 1
Spare 25mm head 1057175 1
Spare M12 battery 3.0Ah 1061185 1
Spare M12 charger 1057410 1
Description Code Qty Price each
30g 1008334 1
Description Code Qty Price each
Cutter 1009031 1
8.95
29.72
478.80
52.00
52.00
52.00
60.00
60.00
3.60
27.19
1 1 3e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Plu
mbi
ng T
ools
and
Acc
esso
ries
Plumbing - PEX Tools and Accessories
Hydraulic test pumpUse to pressure test all UFH and plumbing installations before screeding and before commissioning. Capacity 5 litres. Maximum pressure 25 bar. Connection is ½” MI.
Description Code Qty Price each
5 Litres 25 BAR 1004057 1
Uponor PEX hand tool set and headsComplete tool set in a box. Includes all 3 expander heads and instructions.
Description Code Qty Price each
3 Heads (16, 20, 25mm) 1004000 1
Autorotation headUsed in conjunction with item 1004000
Description Code Qty Price each
Autorotation head 1038188 1
133.88
358.80
104.16
1 1 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
MLCP pliers
Description Code Qty Price each
Pipe cutting pliers 12-20mm 1006636 1
Spare blades for cutting pliers 1006637 1
Special pipe cutting pliers for Uponor MLCP with an outer diameter of 12-20mm; with corrugated tube cutting attachment.
Pipe cutter
Description Code Qty Price each
Pipe cutter 14-32mm 1013719 1
Spare cutting blade 1013721 1
Pipe cutter for use with Uponor MLCP.
Bevelling tool 16mm
Description Code Qty Price each
16mm 1006830 1
Installation tool for the bevelling of Uponor MLCP. Supplied with turning handle (can also be used as cordless screwdriver attachment, see instructions).
Underfloor Heating - MLCP Tools and Accessories
Polystyrene hot cutter
Description Code Qty Price each
110V 1006293 1
230V 1006290 1
Ideal for use when installing floating floor panels to cut extra grooves and channels in the insulation. Supplied head cuts 16mm groove. Optional 20mm head available (1002072).
Pressure test plugReusable plug with ½“ FT designed for pressure-testing of Uponor MLCP installations.
Description Code Qty Price each
16mm 1013756 10
Underfl
oor Heating Tools and A
ccessories
31.05
5.16
21.50
8.64
101.40
90.35
8.41
1.67
1 1 5e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Plastic pipe cuttersCost effective PEX pipe cutters to leave the perfect jointing finish.
Polystyrene hot cutter head (20mm)Optional 20mm head only for cutting extra pipe channels into PEX 20 floating floor panels to fit 20mm diameter pipe. For connection to polystyrene hot cutter 1006290 230V or 1006293 110V.
Pipe and conduit cutterThis tool is specially designed for cutting pipe-in-conduit. Conduit cutter is guarded to prevent damage to the pipe inside the conduit. Maximum pipe diameter 22mm.
Description Code Qty Price each
Pipe cutter 12-28mm 1001369 1
Pipe cutter 12-40mm 1001370 1
Description Code Qty Price each
20mm head 1002072 1
Description Code Qty Price each
Cutter 1009031 1
Underfloor Heating - PEX Tools and Accessories
Und
erfl
oor
Hea
ting
Tool
s an
d A
cces
sori
es
8.95
29.72
40.79
27.19
1 1 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Underfl
oor Heating Tools and A
ccessories
Hydraulic test pumpUse to pressure test all UFH and plumbing installations before screeding and before commissioning. Capacity 5 litres. Maximum pressure 25 bar. Connection is ½” MI.
Description Code Qty Price each
5 Litres 25 BAR 1004057 1
Underfloor Heating - General Tools and Accessories
Kombi gun
For all Uponor pipe from 15mm to 20mm (multi-layer composite pipe and cross-linked polyethylene pipe) to all common UK underfloor heating insulation boards. For use with Kombi Klips 1002296 and 1002297.
Description Code Qty Price each
Kombi Gun 1002295 1
Uponor TapeWide tape for sealed joining of Uponor insulation products.Roll width: 50mmRoll Length: 66m
Uponor Tape DispenserFor taping of insulation sections and edges.For use with tape 1000012
Description Code Qty Price each
Tape dispenser 1000142 1
Description Code Qty Price each
Width 50mm x Length 66m 1000012 1
133.88
110.65
21.39
4.43
1 1 7e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Und
erfl
oor
Hea
ting
Tool
s an
d A
cces
sori
es
Underfloor Heating - General Tools and Accessories
Pipe De-coilerSuitable for both PEX and MLCP pipes. Includes coil retention arms and de-coiling eyelet.
Mobile Pipe De-coilerSuitable for both PEX and MLCP pipes. Includes coil retention arms and de-coiling eyelet.
Description Code Qty Price each
De-coiler 1058663 1
Description Code Qty Price each
De-coiler 1058662 1
NEW
NEW
187.84
221.84
1 1 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 e n q u i r i e s . u k @ u p o n o r. c o m
Comprehensive installer, design and control courses available at the Uponor Training Academy.
All courses are held at our purpose built facility close to J20 M1, in the market town of Lutterworth.
Training Academy: 01455 551363Uponor Head Office: 01455 550355email: [email protected]
www.uponor.co.uk
• UFH Installer Course A two-day course at our purpose-built facility in
Lutterworth. The course is aimed at both new and experienced users of our products. Day 1 gives a thorough understanding of applications of UFH in our theory suite. Day 2 follows with practical exercises in our hands-on practical suite.
• Design Considerations & Controls Course Recommended as a follow-up to the UFH Installer
course, this course is usually aimed at experienced installers and gives a basic understanding of system requirements from a design point of view. You will also have the opportunity to look at any new Uponor products which are now available.
• Controls Wiring Course Uponor has recently launched a range of innovative
water temperature and air temperature controls. Consequently, we are now offering an informative course aimed at installers and electricians, who wish to increase their product knowledge with respect to Uponor control systems.
• Plumbing Applications Course A tailored course to show the advantages of Uponor
plumbing applications over traditional materials. Delegates who will benefit from this course would have a previous plumbing knowledge. The course includes Pipe technology, MLCP Riser System, Multi-layer, Pex pipes, RTM & Practical training.
• Merchant Course A course which gives an overview of Uponor products
and their applications. Mainly aimed at Merchants but can be specifically tailored to give a bespoke course for installers, or anyone who requires specific guidance in the application of UFH or Plumbing. Please contact us to discuss your requirements.
All courses include:* Course Materials * Uponor delegate packs * Exclusive ‘on the day’ Tool Deals * Lunch
1 1 9e n q u i r i e s . u k @ u p o n o r. c o m C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5
Uponor - Conditions of Sale 1. Interpretation In these conditions-
Buyer means the company, firm, body or person buying the Goods and/or services
or whose order for the Goods and/or Services is accepted by the Supplier;
Conditions means the terms and conditions set out in this document and include any
special terms and conditions agreed in writing between the Buyer and the Supplier; any special terms shall prevail;
Contract means the contract for the sale of the Gods and/or Services to be provided
by the Supplier pursuant to the Contract;
Goods mean the goods the Supplier agrees to supply;
Services means the Services the Supplier agrees to supply;
Supplier means Uponor Limited or any other Uponor Group Company
Writing includes fax, e-mail and other comparable means of communication
1.2 Any reference in these conditions to any provision of a statute shall be construed as a reference to that provision as amended, re-enacted or extended at the relevant time.
1.3 Any reference to any English legal concept or term shall, where relevant, be deemed to apply to the nearest analogous concept or term in any other jurisdiction.
2 Basis of the Sale
2.1 The Supplier shall sell the Goods and/or Services in accordance with any written quotation of the Supplier which is accepted by the Buyer or written order of the Buyer which is accepted by the Supplier, subject in either case to these Conditions, which shall govern the Contract to the exclusion of any other terms and conditions.
2.2 No variation to these Conditions shall be binding unless agreed in Writing by an authorised representative of the Supplier.
2.3 Any typographical, clerical or other error or omission in any sales literature, quotation, price list, acceptance of offer, invoice or other document or information issued by the Supplier shall be subject to correction without any liability on the part of the Supplier.
3 Orders and Specifications
3.1 No order submitted by the Buyer is accepted by the Supplier unless confirmed in Writing by the Supplier’s authorised representative or delivery of the Goods and/or Services by the Supplier.
3.2 The Buyer is responsible for ensuring the accuracy of the terms of any order (including any applicable specification) and for giving the Supplier any necessary information relating to the Goods and/or Services within a sufficient time to enable the Supplier to perform the Contract in accordance with its terms.
3.3 The quantity, quality and description of and any specification for the Goods and/or Services are those set out in the Supplier’s quotation or the Buyer’s order (to the extent accepted by the Supplier).
3.4 If the Goods are to be manufactured or any process is to be applied to the Goods by the Supplier in accordance with a specification submitted by the Buyer, the Buyer shall indemnify the Supplier against all loss, damages, costs and expenses incurred by the Supplier in connection with any claim for infringement of any patent, copyright, design, trade mark or other intellectual property rights. The Supplier gives no warranty that any Goods based on the specification of the Buyer will be fit for their intended purpose.
3.5 The Supplier may make any changes in the specification of the Goods and/or Services which are required to conform to any applicable statutory or EC requirements or which do not materially affect their quality or performance.
3.6 No order which has been accepted by the Supplier may be cancelled by the Buyer, except with the agreement in Writing of the Supplier and on terms that the Buyer indemnifies the Supplier in full against all loss (including loss of profit), costs (including the cost of all labour and materials used), damages, charges and expenses incurred by the Supplier as a result of cancellation.
3.7 All drawings, designs, specifications and other information provided by the Supplier are confidential and all rights of copyright ownership and other intellectual property rights in respect of them shall remain vested in the Supplier and shall not pass to the Buyer.
4. Price of Goods
4.1 The price of the Goods and/or Services shall be the price specified on the Supplier’s confirmation of order or, if none, the price specified in the Supplier’s quotation or, if none, the Supplier’s published price list current at the date of supply of the Goods and/or Services shall apply.
4.2 The Supplier may vary the price of the Goods and/or Services at any time before delivery to reflect any change in the cost to the Supplier which is due to any factor beyond the control of the Supplier (including, without limitation, foreign exchange fluctuation, currency regulation, increase in the costs of labour, materials or other costs of manufacture), any change in delivery dates, quantities or specifications for the Goods and/or Services which is requested by the Buyer, or any delay caused by any instructions of the Buyer or failure of the Buyer to give the Supplier adequate information or instructions.
4.3 All prices are given by the Supplier on an ex works basis and exclude VAT and other duties and the Buyer shall be liable to pay those duties and (subject to condition 6.6) the Supplier’s charges for transport, packaging and insurance.
4.4 The Supplier may sue the Buyer for the price of the Goods, notwithstanding that title to them has not passed to the Buyer.
5. Terms of Payment
5.1 The Supplier may invoice the Buyer at any time for the price of the Goods and/or Services or part of it and, without limitation, may invoice the Buyer in respect of any instalment of an order. Unless the Supplier specifies otherwise (in writing), the Buyer shall pay the invoice (in full without any set off, deduction or counterclaim) within 30 days of the end of the calendar month in which the invoice is dated. Time of payment of the price shall be of the essence of the Contract.
5.2 If the Buyer fails to make any payment by the due date or the Supplier has reasonable grounds for believing that the Buyer will not make any payment then, without prejudice to any other right or remedy available to the Supplier, the Supplier may cancel the Contract or suspend any further deliveries to the Buyer.
5.3 If the Buyer fails to make any payment on the due date then without prejudice to any other right or remedy available to the Company the Company shall be entitled to charge the Buyer interest (both before and after any judgment) on the amount unpaid at the rate of 8% per annum above Bank of England base rate from time to time until payment is made (a part of a month being treated as a full month for the purpose of calculating interest)
6. Delivery and Performance
6.1 Unless otherwise agreed in Writing by the parties, delivery of the Goods shall be made by the Supplier “ex works” as that term is defined in “Inco terms” - the international rules for the interpretation of trade terms of the International Chamber of Commerce sales dated 2000.
6.2 Any dates quoted for delivery of the Goods and/or Services are approximate only and the Supplier shall not be liable for any delay in delivery of the Goods and/or Services.
6.3 If the Supplier fails to deliver the Goods or Services (or any instalment) and the Supplier is liable under these Conditions, the Supplier’s maximum liability shall be the excess (if any) of the cost to the Buyer of similar goods or services to replace those not delivered or performed over the price of the Goods or Services.
6.4 If the Buyer fails to take delivery of the Goods or fails to give the Supplier adequate delivery instructions then, without prejudice to any other right or remedy available to the Supplier, the Supplier may store the Goods until actual delivery and charge the Buyer for the reasonable costs (including insurance) of storage and/or sell the Goods at the best price readily obtainable and (after deducting all reasonable storage and selling expenses) account to the Buyer for the excess over the price under the Contract or charge the Buyer for any shortfall below the price under the Contract.
6.5 The Buyer shall comply with all laws governing the importation of the Goods into the country of destination.
6.6 The Supplier will not accept any order for goods which has a nett value of under £500.00 (excluding VAT and delivery) other than an order for products from its “Spares List”.
6.7 The Buyer shall be liable to pay the Suppliers charges for transport of the Goods where:
6.7.1 The Suppliers net invoice value (excluding VAT and delivery costs) is between £300.00 and £500.00. In this instance the cost of carriage will be limited to £25.00
6.7.2 The goods ordered by the Buyer are specified as being required on a next day delivery. Where a next day service is required customers should contact the supplier for a delivery charge quotation. Delivery will be charged on a cost basis whether this is to the Buyers address or that of a third party.
6.7.3 Delivery of the goods is requested to site or another third party address other than on a next day service. Where this is requested the following charges shall apply;
Net Invoice value £500 - £999 Carriage charge £50.00
Net Invoice value £1000 - £2999 Carriage charge £75.00
Net Invoice value over £3000 Free
6.7.4 Where a next day service is required customers should contact the supplier for a delivery charge quotation.
6.8 Any alteration to condition 6.7(.1 to .4) must be agreed and confirmed in writing by the Supplier.
6.9 Retention to title: Goods remain the property of Uponor Limited until paid for in full. Any query regarding this delivery should be notified in writing to Uponor Limited within 3 working days of receipt of the goods.
7. Risk and Property
7.1 Risk of damage to or loss of the Goods shall pass to the Buyer at the time of delivery or, if the Buyer wrongfully fails to take delivery the time when the Supplier has tendered delivery of the Goods. The Buyer should insure the Goods accordingly.
7.2 Notwithstanding delivery and the passing of risk in the Goods, or any other provision of these Conditions, the property in the Goods shall not pass to the Buyer until the Supplier has received in cash or cleared funds payment in full of the price of the Goods and all other goods and services agreed to be sold by the Supplier to the Buyer for which payment is then due.
7.3 Until such time as the property in the Goods passes to the Buyer, the Buyer shall hold the Goods as the Supplier’s fiduciary agent and bailee, and shall keep the Goods separate from those of the Buyer and third parties and properly stored, protected and insured and identified as the Supplier’s property, and shall not be entitled to dispose of the Goods.
7.4 Until such time as the property in the Goods passes to the Buyer, the Supplier may at any time require the Buyer to deliver up the Goods to the Supplier and, if the Buyer fails to do so forthwith, enter upon any premises of the Buyer or any third party where the Goods are stored and repossess the Goods.
8. Warranties and Liability
Warranties
8.1 Subject to the conditions set out below, the Supplier warrants that the Goods will correspond with their specification at the time of delivery and will be free from defects in material and workmanship for a period of 12 months from delivery.
8.2 This warranty is given by the Supplier subject to the following conditions:
8.2.1 the Supplier shall be under no liability in respect of any defect arising from any drawing, design or specification supplied by the Buyer;
8.2.2 the Supplier shall be under no liability in respect of any defect arising from fair wear and tear, wilful damage, negligence, abnormal working conditions, failure to follow the Supplier’s instructions (whether oral or in Writing), misuse or alteration or repair of the Goods without the Supplier’s approval;
8.2.3 this warranty does not extend to parts, materials or equipment not manufactured by the Supplier, in respect of which the Buyer shall only be entitled to the benefit of any such warranty or guarantee as is given by the manufacturer to the Supplier.
8.3 Subject as expressly provided in these Conditions, all warranties, conditions or other terms implied by statute or common law are excluded to the fullest extent permitted by law. Without limitation, the Supplier does not warrant the accuracy or otherwise of any design, drawing, specification, instructions, other information or advice that it provides as part of the Services and/or as ancillary information in relation to the Goods.
8.4 Any claim by the Buyer which is based on any defect in the quality or condition of the Goods or their failure to correspond with specification shall be notified in writing to the Supplier within 7 days of delivery or (where the defect or failure was not apparent on reasonable inspection) within a reasonable time after discovery of the defect or failure, but, in any event, within 12 months of delivery. If delivery is not refused, and the Buyer does not notify the Supplier accordingly, the Buyer may not reject the Goods and the Supplier shall have no liability and the Buyer shall pay the price as if the Goods had been delivered in accordance with the Contract.
8.5 Where any valid claim is made in accordance with this Clause 8, the Supplier may replace or repair the Goods (or the part in question) or re-supply the Services (or the part in question) free of charge or, at the Supplier’s sole discretion, refund to the Buyer the price of the Goods or Services (or part of it), but the Supplier shall have no further liability to the Buyer.
General Liability
8.6 Notwithstanding anything else in this Contract, neither party’s liability in respect of death or personal injury caused by that party’s negligence shall be limited.
8.7 The Supplier shall not be liable to the Buyer for loss of contracts, profits, anticipated savings, revenue, business, stoppage to other work or indirect or consequential loss (whether caused by the negligence of the Supplier, its employees or agents or otherwise) in connection with this Contract.
8.8 Notwithstanding any other provision in the Contract except Condition 8.5, the entire liability of the Supplier under or in connection with the Contract shall not exceed the sum paid to the Supplier by the Buyer for the Goods or the Services (or both, where both Goods and Services are to be supplied) which are the subject of the claim in question by the Buyer.
8.9 The Supplier shall not be liable for any breach of its obligations to the extent that the Supplier is prevented or hindered from complying with them by “Force Majeure”.
8.10 “Force Majeure” means any cause beyond the reasonable control of the Supplier including (without limitation) strikes, lock-outs, labour
9. Insolvency of Buyer
9.1 Without prejudice to any other right or remedy available to the Supplier, the Supplier may cancel the Contract or suspend any further deliveries without any liability to the Buyer, if:
9.1.1 the Buyer is unable to pay its debts, makes any voluntary arrangement with its creditors or (being an individual or firm) becomes bankrupt or (being a company) becomes subject to an administration order or goes into liquidation; or
9.1.2 an encumbrancer takes possession, or a receiver is appointed, of any of the property or assets of the Buyer; or
9.1.3 the Buyer ceases, or threatens to cease, to carry on business; or
9.1.4 the Supplier reasonably believes that any of the foregoing events is about to occur in relation to the Buyer and notifies the Buyer accordingly.
9.2 If the Goods and/or Services have been delivered but not paid for and the Supplier cancels the Contract under Conditions 5.2 and/or 9, the price shall become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary.
10. Non-standard Orders
10.1 Where the Buyer orders Goods or materials of a type, size or quality not normally produced by the Supplier or Services not normally performed by the Supplier, the Supplier shall use all reasonable endeavours to execute the order but, without prejudice to any other provision limiting the Supplier’s liability, if it proves impossible, impracticable or uneconomical to carry out or complete the order, the Supplier may cancel the Contract or the uncompleted balance of it without penalty and the Buyer shall only be liable to pay for the part of it actually delivered or performed.
11. Export Sales
11.1 Subject to Condition 6.1, where Goods are sold on the basis of international trade terms, they shall be defined in accordance with “Inco terms” - the international rules for the interpretation of trade terms of the International Chamber of Commerce sales dated 2000.
11.2 Where Goods are sold FOB, the Supplier shall not be required to give the Buyer the notice specified in Section 32(3) of the Sale of Goods Act 1979.
11.3 Unless otherwise agreed by the Supplier in Writing, the price of the Goods and/or Services shall be secured by an irrevocable letter of credit satisfactory to the Supplier and established by the Buyer in favour of the Supplier immediately upon receipt of the Supplier’s confirmation of order form and confirmed by a United Kingdom bank acceptable to the Supplier. The letter of credit shall be for the price payable plus any duties and taxes payable to the Supplier and shall be valid for the longer of six (6) months or any period estimated by the Supplier for delivery of the Goods and/or Services.
12. Packing
12.1 Unless otherwise agreed in Writing by the parties, the price specified by the Supplier excludes the cost of packing cases and packing materials, for which the Buyer shall be additionally liable. If the Supplier notifies the Buyer that packing cases and/or materials are returnable, then the full cost of these is payable by the Buyer if the Buyer does not return them in good condition to the Supplier either (at the Supplier’s option) carriage paid or in the Supplier’s vehicle within three (3) months of their delivery to the Buyer. Where not returnable, the Buyer will dispose of all packing in accordance with the regulations (whether statutory or otherwise) relating to the protection of the environment.
12.2 The Supplier shall use all reasonable endeavours to ensure, where necessary, the appropriateness of packing before despatch, but the Supplier shall not be liable for any damage to or loss of Goods between despatch from the Supplier and delivery in accordance with this Contract.
13. General
13.1 The Supplier may perform any of its obligations or exercise any of its rights under this Contract through any other member of its group.
13.2 The Buyer may not assign any of its rights or obligations or mortgage, charge (otherwise than by floating charge) any of its rights under this Agreement without the prior written consent of the Supplier.
13.3 Each party acknowledges that, in entering into this Contract, it does not do so on the basis of and does not rely on any representation, warranty or other provision except as expressly provided in this Contract and all conditions, warranties or other terms implied by statute or common law are excluded. This condition shall only apply to the extent permitted by law.
13.4 Any notice required or permitted to be given by either party to the other shall be in Writing addressed to that other party at its registered office or principal place of business or such other address as may at the relevant time have been notified pursuant to this provision to the party giving the notice.
13.5 No waiver by the Supplier of any breach of the Contract by the Buyer shall be considered as a waiver of any subsequent breach of the same or any other provision.
13.6 If any provision of the Contract is held by any competent authority in UK law to be invalid or unenforceable in whole or in part the validity of the other provisions of the Contract and the remainder of the provision in question shall not be affected.
13.7 A person who is not a party to the Contract has no rights under the Contracts (Rights of Third Parties) Act 1999 to enforce any term of the Contract.
13.8 The Contract shall be governed by and construed in accordance with the laws of England, and the parties submit to the non-exclusive jurisdiction of the English courts.
13.9 When supplied as B2B EEE the producer invokes regulation 9.2 and passes all WEEE obligations to the end user.
Copyright © Uponor (Uponor Limited.)Reproduction of any part of this publication for any purpose is not permitted without the prior written permission of Uponor Limited.
The contents of this brochure are provided for guideline only, please consult our technical manuals for full up-to-date information.
Uponor reserves the right to alter specifications and operating parameters for all their Underfloor Heating and Plumbing & Heating Systems at any time as part of its policy of continuous product development.
Care has been taken to ensure that the information in this price guide is correct at the time of going to press. Uponor Limited reserve the right to alter prices and the details of designs and performance of products without notice. E&OE.
Uponor Limited (“Uponor”) guarantees [to the original purchaser/
customer] that pipes and fittings sold by it are free of defects in materials
or manufacture under normal conditions of use for a period of 25 years and
in case of electrical and mechanical products for 2 years from the date of
installation. This guarantee only applies to the products stored, installed,
tested and operated in accordance with the fitting instructions issued by
Uponor and valid at the time the products were installed.
Where a claim is made during the guarantee period and products are proven
to be defective in materials and/or manufacture at the time of delivery,
Uponor will supply replacement products free of charge. This is the exclusive
remedy under this guarantee.
Uponor disclaims any warranty or guarantee not expressly provided for
herein, including any implied warranties of merchantability or fitness for
a particular purpose. Uponor further disclaims any and all responsibility
or liability for losses, damages and expenses, including special, direct,
indirect, incidental and consequential damages, whether foreseeable or not,
including without limitation any loss of time or use or any inconvenience
arising from the ownership, installation or use of the products sold
hereunder.
This guarantee does not affect the statutory rights of the consumer.
Uponor LimitedHead OfficeGilmorton RoadLutterworthLeicestershire LE17 4DU
T 01455 550355F 01455 550366E [email protected] www.uponor.co.uk
UPG
-Apr
il-20
13-U
K