price list - iml-na.com · this price list is valid until the publication of a new price list,...
TRANSCRIPT
Price ListInnovative Wood Testing Systems for Trees and Timber Structures
All information contained in this price list has been prepared with the utmost care. However, errors cannot be excluded.
IML North America, LLC. assumes neither legal responsibility nor any liability for the consequences of such errors or mistakes. The information contained herein may be modified without notice.
No liability is accepted for printing or typographical errors. This price list is valid until the publication of a new price list, subject to price corrections due to any technical improvements. This price list supersedes all previously valid price lists.
Any kind of reproduction or processing by means of electronic systems, or distribution of the present or any part of it without prior written approval of IML North America, LLC. is strictly prohibited.
Product information in this price list is limited to a few fundamental properties and practical applications. Detailed information is available in our brochures or on our website: www.iml-na.com.
All prices quoted are exclusive of taxes, freight, packaging and insurance costs. Unless otherwise stated, all prices are in dollar per unit.
All prices are subject to change. We deliver in accordance with our general terms and conditions. Changes with regard to better function, performance, durability and technical improvements are reserved. Update and repair prices are not included in this price list. The following products are similar to those in the illustrations.
© 2015 IML North America, LLC. All rights reserved. Dated 01/2015.
3Innovative Wood Testing Systems for Trees and Timber Structures
FractometerMeasurement of the bending and compression strength
General Accessories
‚Jim-Gem‘ Increment borerCore extraction
IML Timber ModelsProf. Dr. Claus Mattheck
IML Micro HammerSound velocity measurement
IML Measuring Table Annual ring analysis
IML Technical LiteratureScientific literature on trees
General Delivery and Payment Terms
IML-RESI Systems chargersFor all IML-RESI Systems batteries
Table of Contents
IML Probe Rod/ Analysis Testing Pin 42
IML Penetrometer 43
Calipers 43
Hatchets 44
Stainless steel pattern 44
IML Micro Hammer 36
Optional Accessories & Spare Parts 36-38
IML Measuring Table 39
Our selection of books 46-49
General Delivery and Payment Terms 50
‚Jim-Gem‘ Increment borer 34
Accessories & Spare Parts 34-35
Timber Model Hazard Beam 45
Timber Model Height Measurement Tool 45
Chargers 31
Fractometer I + Fractometer II 32
Fractometer II Complete Set 33
Innovative Wood Testing Systems for Trees and Timber Structures
IML-RESI SystemsDrilling resistance instruments
IML-RESI MD300 4-5
IML-RESI PD-Series 6-15
IML-RESI F-Series 16-27
Consumables IML-RESI E-/ M-/ B-Series 28-30
IML Service and CalibrationAnnual service inspection
IML Service and Calibration 40
IML Tree LabelsAluminium Tree Labels
IML Tree Labels 41
4 Innovative Wood Testing Systems for Trees and Timber Structures
IML-RESI MD300Lightweight hand drill, fast and easy to use
5
IML-RESI MD300
Optional Accessories
IML-RESI MD300 without drill (only MD300) Item No. 4000150 900,00 $
IML-RESI MD300 with Bosh drill GSR 18V Li-Ion Professional - incl. 110V Li-Ion 18V battery charger + 2x Premium Li-Ion batteries 18V 3,0 Ah Item No. 4000152 1.515,00 $
Drilling needles IML-RESI MD300 (10 pieces per pack) Length 387 mm Item No. 3100317 183,00 $
Quiver for MD300 drilling needles For safe storage of approximately 50 drilling needles Item No. 3103016 42,00 $
Aluminium transport case incl. foam inlay and key Item No. 3100311 247,00 $
Lightweight hand drill, fast and easy to use
IML-RESI MD300
The IML-RESI MD300 is a purely mechanical drill that does not record an electronic or mechanical measure-ment curve. The user ‘feels’ the result and can read the penetration depth on the 300 mm scale. Often an abrupt and fast penetration is perceptible when the instrument detects a rot zone. Even conifer year rings can be felt.
• Cordless drill as drive unit• Sturdy stainless steel housing• Easy to read 1:1 depth scale• Diameter of the drilling needle:
Needle tip: Ø 3,0 mm Needle shaft: Ø 1,5 mm
• Available drilling depth 300 mm• Drill spindle for external drill: Ø 12 mm
Scope of delivery (standard):• MD300 drill attachment (depth 300 mm)• 1x drilling needle (Length 387 mm)• Chuck key• Instructions manual
Drilling depth scale 1:1
IML-RESI MD300
IML-RESI MD300
Innovative Wood Testing Systems for Trees and Timber Structures
6
IML PowerDrillUncompromisingly precision for all applications
Innovative Wood Testing Systems for Trees and Timber Structures
7
IML PowerDrill
IML-RESI PD200 Drilling depth 200 mm Item No. 3100900-2PD 7.215,00 $
IML-RESI PD300 Drilling depth 300 mm Item No. 3100900-3PD 7.375,00 $
IML-RESI PD400 Drilling depth 400 mm Item No. 3100900-4PD 7.810,00 $
IML-RESI PD500 Drilling depth 500 mm Item No. 3100900-5PD 8.115,00 $
IML-RESI PD600 Drilling depth 600 mm Item No. 3100900-6PD 8.410,00 $
IML-RESI PD750 Drilling depth 750 mm Item No. 3100900-7PD 8.870,00 $
IML-RESI PD1000 Drilling depth 1000 mm Item No. 3100900-8PD 10.260,00 $
Uncompromisingly precision for all applications
The IML Power Drill can be used anywhere where reliable and meaningful test results are required.
• Comfortable with clear display• Easy, fast and digital recording of the measurement
data• Fatigue-free operation due to the ergonomic design
and low overall weight• High drilling performance with minimal energy
consumption• Rugged and splashproof aluminium housing• Simultaneous recording of drilling resistance and feed
cam for better decay detection • Automatic curve evaluation for wooden poles
Integrated 45° adapter
IML-RESI PD400
IML-RESI PD-Series
Scope of delivery (standard):• Measuring instrument PD with a mounted drilling
needle, 25 m standard memory, quiver with 5 drilling needles, 110V battery charger Li-Ion 18V, 2x premium 18V 3,0 Ah Li-Ion batteries, mini-USB 2.0 data transfer cable, drill chuck with tools, pliers, system transportca-se, IML Software Center PD tools, Instructions Manual
Innovative Wood Testing Systems for Trees and Timber Structures
8
Add-on Module Needle Check NC
Automatic check of needle tip for breakage and wear after every measurement. Different wear tolerances can be selec-ted when ordering. The status of the needle (‚ok‘ / ‚worn‘) is stored with each measurement.
Add-on Module Needle Check NC Item No. 4100015 740,00 $
Optional add-onsIML-RESI PD-Series
IML Software Center PD-Tools PRO
Extended Evaluation Software
Memory Enlargement
Please note: If the FEED add-on module is installed, then specified memory lengths are halved.
IML Software Center PD-Tools PRO incl. 3 installation licences Item No. 3100808 890,00 $
Multi User Licence Activation of software for another PC or handheld (for more than three installations) Item No. 3100890 210,00 $
Memory Enlargement MEM1 50 metres recording length of the measurement curves Item No. 4100008 145,00 $
Memory Enlargement MEM2 100 metres recording length of the measurement curves Item No. 4100009 270,00 $
Memory Enlargement MEM3 180 metres recording length of the measurement curves Item No. 4100010 450,00 $
Add-on Module WoodInspector
The IML WoodInspector is an additional module for the PD-Tools PRO software package. An automatic assessment of wooden poles is performed by the IML WoodInspector. Its features are: graphic and numerical cavity detection, detec-tion of decay and incipient decay, evaluation of the data feed, automatic diameter detection for automatic withdrawal of the drilling needle after exiting below a particular drilling angle, displaying the drilling result immediately after drilling, Individual user adjustment.
IML WoodInspector Item No. 3100814 1.420,00 $
IML WoodInspector Complete package incl. IML WoodInspector, FEED, TLT and SCL Item No. 3100815 2.160,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
Functions:• Standard software functions: Configuration, transfer, analysis, magnification, print-out and saving• PRO version additional features: Export, averaging, printing, cavity detector, tree-ring analysis and simultaneous display and transmission of the measured curve during drilling on PC or handheld
9
Add-on Module Tilt Sensor TLT
Tilt angle display and storage. Further options include setting two preferred angles with optical and acoustic indicators and disable function if the tilt is outside the set tolerance. Optional tilt compensation in the drilling depth preselection..
Add-on Module Tilt Sensor TLT Item No. 4100018 242,00 $
Add-on Module Scaling Package SCL
Scaling of the drilling depth on a scale of 1:1, magnification, and overall view (full drilling depth on display width). Scaling of the amplitude to a fixed factor of 1.0 / 1.5 / 2.0 / 2.5 / 3.0 or automatic scaling
Add-on Module Scaling Package SCL Item No. 4100019 242,00 $
Add-on Module Access Control ACS
Records of almost all functions and settings with a password prompt. Avoids an unintentional change of device settings.
Add-on Module ACS Item No. 4100020 135,00 $
Add-on Module RCI
Interface for configuration, control and data transfer to customer software (not using PD-Tools/PD-Tools Pro). The data may be processed further directly by the customer software.
Add-on Module RCI Item No. 3100807 1.430,00 $
Optional add-onsIML-RESI PD-Series
Add-on Module FEED
Additional recording of the feed curve (compressive force) next to the drilling curve (torsional force). In some cases the feed curve contains a significantly reduced curve or no skirt friction at all acting on the drilling needle. This means that it is considerably easier to detect the difference between healthy and damaged wood. In addition, it is easier to diagnose rot on the feed curve at an early stage.
Add-on Module FEED Item No. 4100017 435,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
10
Cleaning Tool
Tool for cleaning the front adapter
Cleaning Tool Item No. 4100051 23,00 $
Handle
Additional handle which can be attached to the device in different positions
Handle Item No. 4100024 72,00 $
Optional AccessoriesIML-RESI PD-Series
Shoulder Strap
Shoulder strap with 2 snap hooks and 2 sturdy eyelets on the instrument
Shoulder Strap Item No. 30009903 70,00 $
Bluetooth Printer
On-site print-out of measurements on a 1:1 scale
Bluetooth Printer incl. 10 Thermal-Paper rolls Item No. 4100014 1.037,00 $
Premium Batteries
Spare batteries
Premium Battery 18V Li-Ion 3,0 Ah Item No. 30009933 270,00 $
Transport bag
Transport bag for IML-RESI PD instrument with practical side pockets for batteries, pliers and quiver
Transport bag for IML-RESI PD300 / PD400 Item No. 4100047 185,00 $
Transport bag for IML-RESI PD500 Item No. 4100053 200,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
11
System Transport Case
Stable system transport case with foam insert and key
Transport Case for IML-RESI PD200 / PD300 / PD400 Item No. 3100711 362,00 $
Transport Case for IML-RESI PD500 Item No. 3100811 390,00 $
Transport Case for IML-RESI PD600 Item No. 3100812 406,00 $
Transport Case for IML-RESI PD750 Item No. 3100911 420,00 $
Transport Case for IML-RESI PD1000 Item No. 3100912 435,00 $
Quiver for Drilling Needles
For safe storage of approximately 50 drilling needles
Quiver for IML-RESI PD200 / PD300 / PD400 Item No. 3104017 42,00 $
Quiver for IML-RESI PD500 Item No. 3105020 42,00 $
Quiver for IML-RESI PD600 Item No. 3105017 42,00 $
Quiver for IML-RESI PD750 Item No. 3105018 42,00 $
Quiver for IML-RESI PD1000 Item No. 3105019 42,00 $
Optional AccessoriesIML-RESI PD-Series
Innovative Wood Testing Systems for Trees and Timber Structures
12
Threaded Drilling Needles for Pole Inspection
With special and improved surface coating (10 pieces per pack)
IML-RESI PD200 (Ø 2,8 mm tip / length: 421 mm) Item No. 3100329 190,00 $
IML-RESI PD300 (Ø 2,8 mm tip / length: 421 mm) Item No. 3100330 190,00 $
IML-RESI PD400 (Ø 2,8 mm tip / length: 520 mm) Item No. 3100331 205,00 $
IML-RESI PD500 (Ø 2,8 mm tip / length: 687 mm) Item No. 3100332 205,00 $
IML-RESI PD600 (Ø 2,8 mm tip / length: 794 mm) Item No. 3100333 218,00 $
IML-RESI PD750 (Ø 2,8 mm tip / length: 946 mm) Item No. 3100334 232,00 $
IML-RESI PD1000 (Ø 2,8 mm tip / length: 1270 mm) Item No. 3100335 247,00 $
DisposablesIML-RESI PD-Series
Standard Threaded Drilling Needles
With special and improved surface coating (10 pieces per pack)
IML-RESI PD200 (Ø 3,0 mm tip / length: 422 mm) Item No. 3100322 225,00 $
IML-RESI PD300 (Ø 3,0 mm tip / length: 422 mm) Item No. 3100323 225,00 $
IML-RESI PD400 (Ø 3,0 mm tip / length: 521 mm) Item No. 3100324 240,00 $
IML-RESI PD500 (Ø 3,0 mm tip / length: 688 mm) Item No. 3100325 240,00 $
IML-RESI PD600 (Ø 3,0 mm tip / length: 795 mm) Item No. 3100326 255,00 $
IML-RESI PD750 (Ø 3,0 mm tip / length: 947 mm) Item No. 3100327 270,00 $
IML-RESI PD1000 (Ø 3,0 mm tip / length: 1271 mm) Item No. 3100328 285,00 $
Standard Drilling Needles ‚Click‘
With special and improved surface coating (10 pieces per pack)
IML-RESI PD200 (Ø 3,0 mm tip / length: 422 mm) Item No. 3100339 210,00 $
IML-RESI PD300 (Ø 3,0 mm tip / length: 422 mm) Item No. 3100340 210,00 $
IML-RESI PD400 (Ø 3,0 mm tip / length: 521 mm) Item No. 3100341 225,00 $
IML-RESI PD500 (Ø 3,0 mm tip / length: 688 mm) Item No. 3100342 225,00 $
IML-RESI PD600 (Ø 3,0 mm tip / length: 795 mm) Item No. 3100343 240,00 $
IML-RESI PD750 (Ø 3,0 mm tip / length: 947 mm) Item No. 3100344 255,00 $
IML-RESI PD1000 (Ø 3,0 mm tip / length: 1271 mm) Item No. 3100345 270,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
13
DisposablesIML-RESI PD-Series
Drilling Needles for Pole Inspection ‚Click‘
With special and improved surface coating (10 pieces per pack)
IML-RESI PD200 (Ø 2,8 mm tip / length: 421 mm) Item No. 3100349 175,00 $
IML-RESI PD300 (Ø 2,8 mm tip / length: 421 mm) Item No. 3100350 175,00 $
IML-RESI PD400 (Ø 2,8 mm tip / length: 520 mm) Item No. 3100351 190,00 $
IML-RESI PD500 (Ø 2,8 mm tip / length: 687 mm) Item No. 3100352 190,00 $
IML-RESI PD600 (Ø 2,8 mm tip / length: 794 mm) Item No. 3100353 205,00 $
IML-RESI PD750 (Ø 2,8 mm tip / length: 946 mm) Item No. 3100354 220,00 $
IML-RESI PD1000 (Ø 2,8 mm tip / length: 1270 mm) Item No. 3100355 235,00 $
Thermal-Paper Rolls
Thermal-Paper rolls for IML-RESI PD-Series Bluetooth printers(10 pieces per pack)
Thermal-Paper Rolls Item No. 3100336 42,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
14
Spare PartsIML-RESI PD-Series
Exchangeable Telescope
Exchangeable telescope with complete recording of the needle guidance in the event of needle breakage
Exchangeable Telescope PD200 / PD300 / PD400 Item No. 4100016 590,00 $
Exchangeable Telescope PD500 Item No. 4100021 720,00 $
Exchangeable Telescope PD600 Item No. 4100031 720,00 $
Exchangeable Telescope PD750 Item No. 4100022 890,00 $
Exchangeable Telescope PD1000 Item No. 4100023 1.040,00 $
Exchangeable Drill Chuck ‚Threaded‘
Exchangeable drill chuck with threaded socket
Exchangeable Drill Chuck for all PD-Series instruments Item No. 10500-028 240,00 $
Exchangeable Drill Chuck ‚Threaded‘ with Tool
Exchangeable drill chuck ‚threaded‘ with tool
Exchangeable Drill Chuck ‚Threaded‘ with Tool PD200 - PD750 Item No. 10500-027/3 435,00 $
Exchangeable Drill Chuck ‚Threaded‘ with Tool PD1000 Item No. 10500-027/10 435,00 $
Exchangeable Drill Chuck ‚Click‘
Exchangeable drill chuck with ‚Click‘ System
Exchangeable Drill Chuck for all PD-Series instruments Item No. 10500-048 240,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
Exchangeable Drill Chuck ‚Click‘ with Tool
Exchangeable drill chuck ‚click‘ with tool
Exchangeable Drill Chuck ‚Click‘ with Tool PD200 - PD750 Item No. 10500-048/3 435,00 $
Exchangeable Drill Chuck ‚Click‘ with Tool PD1000 Item No. 10500-048/10 435,00 $
15
45° Adapter
Aluminium adapter
45° Adapter Item No. 3100932 72,00 $
Front Adapter
Complete front adapter made of brass
Front Adapter with measuring sleeve Item No. 3100937 145,00 $
Disinfection Adapter
Adapter for disinfecting the drilling needle
Disinfection Adapter for standard drilling needles Item No. 4100043 130,00 $
Disinfection Adapter for pole inspection drilling needles Item No. 4100042 130,00 $
Felt Wheels 10 pieces Item No. 4100044 15,00 $
Spare PartsIML-RESI PD-Series
Innovative Wood Testing Systems for Trees and Timber Structures
16
IML-RESI F-SeriesCompact and flexible use
Innovative Wood Testing Systems for Trees and Timber Structures
17
IML-RESI F-SeriesCompact and flexible use
The IML-RESI F-Series can be used anywhere where relia-ble and meaningful test results are required.
• Cordless drill as a drive unit• On-site documentation of measurement results• Recording of the measurement curve on weather-proof
wax paper strips• Add-on innovative Bluetooth electronic unit enables
rapid digital acquisition of measurement data• Low weight ensures efficient operation even in difficult
operational areas• Splash-proof stainless steel housing with plexiglass
cover to protect the measurement record• Measurements below 45° using snap-on adapter
The IML-RESI F-Series is available in two versions for diffe-rent applications:• Tree Care and Tree Inspection• Construction Wood
Further two enhanced versions can be ordered:
Snap-on 45° Adapter
IML-RESI F300SX
IML-RESI F-Series
Scope of delivery (Tree Care and Tree Inspection):• F-Series measurement device with mounted drilling
needle• Bosch drill GSR 18V Li-Ion Professional with adapter
ring• 110V Charger Li-Ion 18V and 2x 18V Li-Ion 3,0 Ah
batteries• Shoulder strap• 5x drilling needles and 400x wax paper strips• Paper cassette• Tool for maintenance ‚Tool Kit‘• Aluminium transport case• Instructions Manual
Scope of delivery (Construction Wood):• F-Series measurement device with mounted drilling
needle for 45° Adapter• Bosch drill GSR 18V Li-Ion Professional with adapter
ring• 110V Charger Li-Ion 18V and 2x 18V Li-Ion 3,0 Ah
batteries• Shoulder strap• 45° Adapter• 5x drilling needles for 45° Adapter and 400x wax pa-
per strips• Paper cassette• Tool for maintenance ‚Tool Kit‘• Aluminium transport case• Instructions Manual
• S-Version: Particularly stable design of the needle support for frequent use in hardwoods• SX-Version: Improved needle guidance using the exchangeable telescope
Innovative Wood Testing Systems for Trees and Timber Structures
18
IML-RESI F300 (Tree Care and Tree Inspection) Drilling depth 300 mm Item No. 3100800-3S 3.720,00 $
IML-RESI F400 (Tree Care and Tree Inspection) Drilling depth 400 mm Item No. 3100800-4S 4.110,00 $
IML-RESI F500 (Tree Care and Tree Inspection) Drilling depth 500 mm Item No. 3100800-5S 4.545,00 $
IML-RESI F-SeriesCompact and flexible use
IML-RESI F-Series for Tree Care and Tree Inspection
IML-RESI F300S (Tree Care and Tree Inspection) Drilling depth 280 mm Item No. 3100810-3S 4.050,00 $
IML-RESI F400S (Tree Care and Tree Inspection) Drilling depth 380 mm Item No. 3100810-4S 4.440,00 $
IML-RESI F500S (Tree Care and Tree Inspection) Drilling depth 480 mm Item No. 3100810-5S 4.875,00 $
IML-RESI FS-Series for Tree Care and Tree Inspection (reinforced S-Version)
IML-RESI F300SX (Tree Care and Tree Inspection) Drilling depth 280 mm Item No. 3100810-3SX 4.650,00 $
IML-RESI F400SX (Tree Care and Tree Inspection) Drilling depth 380 mm Item No. 3100810-4SX 5.040,00 $
IML-RESI F500SX (Tree Care and Tree Inspection) Drilling depth 480 mm Item No. 3100810-5SX 5.475,00 $
IML-RESI FSX-Series for Tree Care and Tree Inspection (reinforced SX-Version)
Innovative Wood Testing Systems for Trees and Timber Structures
19
IML-RESI F-SeriesCompact and flexible use
IML-RESI F150 (Construction Wood) Drilling depth 150 mm Item No. 3100150 3.715,00 $
IML-RESI F300 (Construction Wood) Drilling depth 300 mm Item No. 3100900-3S 3.870,00 $
IML-RESI F400 (Construction Wood) Drilling depth 400 mm Item No. 3100900-4S 4.260,00 $
IML-RESI F500 (Construction Wood) Drilling depth 500 mm Item No. 3100900-5S 4.695,00 $
IML-RESI F-Series for Construction Wood
IML-RESI F300S (Construction Wood) Drilling depth 280 mm Item No. 3100910-3S 4.200,00 $
IML-RESI F400S (Construction Wood) Drilling depth 380 mm Item No. 3100910-4S 4.590,00 $
IML-RESI F500S (Construction Wood) Drilling depth 480 mm Item No. 3100910-5S 5.025,00 $
IML-RESI FS-Series for Construction Wood (reinforced S-Version)
IML-RESI F300SX (Construction Wood) Drilling depth 280 mm Item No. 3100910-3SX 4.800,00 $
IML-RESI F400SX (Construction Wood) Drilling depth 380 mm Item No. 3100910-4SX 5.190,00 $
IML-RESI F500SX (Construction Wood) Drilling depth 480 mm Item No. 3100910-5SX 5.625,00 $
IML-RESI FSX-Series for Construction Wood (reinforced SX-Version)
Innovative Wood Testing Systems for Trees and Timber Structures
20
Bluetooth Electronic UnitIML-RESI F-Series
Each IML-RESI F Series can be expanded using the Blue-tooth Electronic Unit. The Bluetooth Electronic Unit enab-les rapid digital capture of measurement data
Functions:• Electronic storage of measurement data to internal
memory• Input of 40-digit ID numbers and remarks• USB and Bluetooth interface for connection to a PC or
handheld device• Wireless transmission of measurement record• Simultaneous recording of drilling curve• Displays the feed rate, remaining memory length,
battery state, the drilling stage and the date and time
Bluetooth Electronic Unit
Bluetooth Electronic Unit for IML-RESI F Series
Scope of delivery (standard):• Bluetooth electronic unit with built-in Li-Ion battery and 20 m recording length of the measured curves• Charger with USB connector (110V - 240V)• USB data transfer cable• Bluetooth USB-Adapter• IML Software Center F-Tools Functions: Configuration and readout of electronic, transmission of measurement data via USB or Bluetooth, analysis and storage of data on a PC or handheld device, magnification, scaling, evaluation and printing of measurements
Bluetooth Electronic Unit Item No. 4100007 3.045,00 $
Bluetooth Electronic Unit for IML-RESI F-Series
Innovative Wood Testing Systems for Trees and Timber Structures
21
Optional AccessoriesBluetooth Electronic Unit for IML-RESI F-Series
Memory Enlargement M40 40 metres recording length of measurements Item No. 4100008 142,00 $
Memory Enlargement M80 80 metres recording length of measurements Item No. 4100009 272,00 $
Memory Enlargement M160 160 metres recording length of measurements Item No. 4100010 450,00 $
Memory Enlargement for Bluetooth Electronic Unit
IML Software Center F-Tools PRO
Advanced software with standard F-Tools features plus exporting, averaging, printing of measurements, cavity detector, tree-ring analysis and simultaneous recording and transmission of measurement on a PC or handheld device
IML Software Center F-Tools PRO Item No. 3100803 885,00 $
Pole Inspector (incl. IML Software Center F-Tools PRO)
Automatic cavity evaluation and analysis of external decay
Pole Inspector Item No. 3100806 1.342,00 $
Multi User Licence
Activation of software for another PC or handheld device (for more than three installations)
Multi User Licence Item No. 3100890 210,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
22
Bosch Drill
Drive Unit for IML-RESI F-Series
Bosch Drill GSR 18V Li-Ion Professional incl. charger, 2x Premium Li-Ion 18V 2.6 Ah batteries, adapter ring and instructions Item No. 31000118 630,00 $
Optional AccessoriesIML-RESI F-Series
Quiver for Drilling Needles
For safe storage of approximately 50 drilling needles
Quiver for IML-RESI F300 / F300S / F300SX Item No. 3103016 42,00 $
Quiver for IML-RESI F400 / F400S / F400SX Item No. 3104016 42,00 $
Quiver for IML-RESI F500 / F500S / F500SX Item No. 3105016 42,00 $
Transport Case
Transport case made of aluminium with foam insert and key
Transport Case for IML-RESI F150 Item No. 3100611 247,00 $
Transport Case for IML-RESI F300 / F300S / F300SX Item No. 3100311 247,00 $
Transport Case for IML-RESI F400 / F400S / F400SX Item No. 3100411 247,00 $
Transport Case for IML-RESI F500 / F500S / F500SX Item No. 3100511 247,00 $
Transport Case ‚PROFI‘
Sturdy transport case with foam insert and key
Transport Case ‚PROFI‘ for IML-RESI F300 / F300S / F300SX Item No. 3100312 377,00 $
Transport Case ‚PROFI‘ for IML-RESI F400 / F400S / F400SX Item No. 3100412 377,00 $
Transport Case ‚PROFI‘ for IML-RESI F500 / F500S / F500SX Item No. 3100512 377,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
23
Batteries
Spare batteries for Bosch Drill GSR 12V Professional
Battery 12V 2,0 AhNiCd Item No. 30009924 152,00 $
Optional AccessoriesIML-RESI F-Series
Batteries
Spare batteries for Bosch Drill GBM 12VES-2
Battery 12V 3,0 AhNiMh Item No. 30009930 196,00 $
Premium Batteries
Spare batteries for Bosch Drill GSR 18V Li-Ion Professional
Premium Battery 18V Li-Ion 3,0 Ah Item No. 30009933 270,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
24
Standard Drilling Needles for 45° Adapter
With special and improved surface coating (10 pieces per pack)
IML-RESI F150 (Ø 3,0 mm tip / length: 237 mm) Item No. 3100116 183,00 $
IML-RESI F300 / F300S / F300SX (Ø 3,0 mm tip / length: 387 mm) Item No. 3100317 183,00 $
IML-RESI F400 / F400S / F400SX (Ø 3,0 mm tip / length: 497 mm) Item No. 3100417 197,00 $
IML-RESI F500 / F500S / F500SX (Ø 3,0 mm tip / length: 607 mm) Item No. 3100517 212,00 $
DisposablesIML-RESI F-Series
Standard Drilling Needles
With special and improved surface coating (10 pieces per pack)
IML-RESI F300 / F300S (Ø 3,0 mm tip / length: 372 mm) Item No. 3100316 168,00 $
IML-RESI F400 / F400S (Ø 3,0 mm tip / length: 482 mm) Item No. 3100416 183,00 $
IML-RESI F500 / F500S (Ø 3,0 mm tip / length: 592 mm) Item No. 3100516 197,00 $
Drilling Needles for Pole Inspection for 45° Adapter
With special and improved surface coating (10 pieces per pack)
IML-RESI F300 / F300S / F300SX (Ø 2,8 mm tip / length: 387 mm) Item No. 3100319 139,00 $
IML-RES F400 / F400S / F400SX (Ø 2,8 mm tip / length: 497 mm) Item No. 3100419 148,00 $
IML-RESI F500 / F500S / F500SX (Ø 2,8 mm tip / length: 607 mm) Item No. 3100519 157,00 $
Wax Paper Strips (cm)
Wax paper strips with cm-scale (400 pieces per pack)
IML-RESI F150 Item No. 3100115 225,00 $
IML-RESI F300 / F300S / F300SX Item No. 3100315 225,00 $
IML-RESI F400 / F400S / F400SX Item No. 3100415 225,00 $
IML-RESI F500 / F500S / F500SX Item No. 3100515 225,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
25
Spare PartsIML-RESI F-Series
45° Adapter
Snap-on adapter allows measurements below 45° to the ground level
45° Adapter incl. sleeve, extension of needle guidance and assembly instructions Item No. 3100015 181,00 $
Shoulder Strap
Shoulder strap with two eyelets
Shoulder Strap Item No. 30009907 23,00 $
‚Tool Kit‘
Tool kit for minor maintenance and repair operationsIncl. 1 screwdriver 4 mm, 1 component pliers, pin punch, 1 hexagon pin spanner with t-handle 2,0 and 2,5 mm, 1 hexa-gon wrench 1,5 mm, hook spanner, 1 pair Nord-Lock discs, 2 clutch discs, 1 clutch bushing, 1 clutch nut, 3x Faceplates 0,5, disassembly magnet, 6 casing screws, 5 safety pins and 1 oil can
Tool Kit Item No. 3100010 240,00 $
Safety Pins
Safety Pins for overload protection (10 pieces per pack)
Safety Pins Item No. 3800-059 20,00 $
DisposablesIML-RESI F-Series
Wax Paper Strips (inch)
Wax paper strips with inch-scale (400 pieces per pack)
IML-RESI F150 Item No. 3100118 225,00 $
IML-RESI F300 / F300S / F300SX Item No. 3100318 225,00 $
IML-RESI F400 / F400S / F400SX Item No. 3100418 225,00 $
IML-RESI F500 / F500S / F500SX Item No. 3100518 225,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
26
Exchangeable Telescope
Exchangeable telescope with complete recording of the needle guidance in the event of needle breakage
Exchangeable Telescope F300SX / F400SX Item No. 4100016F 610,00 $
Exchangeable Telescope F500SX Item No. 4100017F 610,00 $
Clutch Cover
Covering of Clutch
Clutch Cover Item No. 3800-065 6,50 $
Spare PartsIML-RESI F-Series
Innovative Wood Testing Systems for Trees and Timber Structures
27
Spare PartsElectronic Unit IML-RESI F-Series
USB Connection Cable
USB Connection Cable for serial Electronic Unit of the IML-RESI F-Series
USB Connection Cable USB Port RS232 Com-Port (9-pin) Item No. 31000302 40,00 $
Charger with USB Connector (110V - 240V)
Charger for Bluetooth Electronic Unit of the IML-RESI F-Series
Charger with USB Connector Item No. 4100011 93,00 $
Bluetooth USB Adapter with USB Cable
USB adapter for wireless Bluetooth connection andUSB connection cable (length: 185 cm) for Bluetooth Electronic Unit of the IML-RESI F-Series
Bluetooth USB Adapter with USB Cable Item No. 4100012 77,00 $
Bluetooth USB-Adapter
USB Adapter for the wireless Bluetooth connection (individual) for Bluetooth Electronic Unit of the IML-RESI F-Series
Bluetooth USB-Adapter Item No. 4100013 52,00 $
Serial Data Transfer Cable
Data Transfer Cable for serial Electronic Unit of the IML-RESI F-Series
Serial Data Transfer Cable RS232 Com-Port (9-pin) to RS232 Com-Port (15-pin) Item No. 31000301 33,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
28
Standard Drilling Needles for 45° Adapter
With special and improved surface coating (10 pieces per pack)
IML-RESI E300 (Ø 3,0 mm tip / length: 489 mm) Item No. 30003905 261,00 $
IML-RESI E400 (Ø 3,0 mm tip / length: 571 mm) Item No. 30004905 275,00 $
IML-RESI E500 (Ø 3,0 mm tip / length: 676 mm) Item No. 30005905 290,00 $
IML-RESI E-Series DisposablesIML-RESI E-Series
Standard Drilling Needles
With special and improved surface coating (10 pieces per pack)
IML-RESI E300 (Ø 3,0 mm tip / length: 467 mm) Item No. 30003900 246,00 $
IML-RESI E400 (Ø 3,0 mm tip / length: 549 mm) Item No. 30004900 261,00 $
IML-RESI E500 (Ø 3,0 mm tip / length: 645 mm) Item No. 30005900 275,00 $
Paper Rolls
Paper Rolls for IML-RESI E-Series (10 pieces per pack)
Paper Rolls Item No. 30009900 18,00 $
Standard Ink Ribbon
Ink Ribbon for IML-RESI E-Series (1 piece)
Ink Ribbon Item No. 30009905 14,00 $
Battery
Spare batteries for IML-RESI E-Series
Battery 7,2V 3,0 AhNiMh Item No. 30009929 156,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
29
Standard Drilling Needles for 45° Adapter
With special and improved surface coating (10 pieces per pack)
IML-RESI M300 (Ø 3,0 mm tip / length: 415 mm) Item No. 3000319 197,00 $
IML-RESI M-Series DisposablesIML-RESI M-Series
Standard Drilling Needles
With special and improved surface coating (10 pieces per pack)
IML-RESI M300 (Ø 3,0 mm tip / length: 393 mm) Item No. 3000316 183,00 $
IML-RESI M500 (Ø 3,0 mm tip / length: 655 mm) Item No. 3000516 197,00 $
Wax Paper Strips
Wax paper strips with cm/inch-scale (400 pieces per pack)
IML-RESI M300 (cm-scale) Item No. 3000315 254,00 $
IML-RESI M500 (cm-scale) Item No. 3000515 275,00 $
IML-RESI M300 (inch-scale) Item No. 3000325 254,00 $
IML-RESI M500 (inch-scale) Item No. 3000525 275,00 $
Batteries
Spare batteries for IML-RESI M-Series
Battery 7,2V 3,0 AhNiMh Item No. 30009929 156,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
30
Standard Drilling Needles for 45° Adapter
With special and improved surface coating (10 pieces per pack)
IML-RESI B300 (Ø 3,0 mm tip / length: 455 mm, rotatable) Item No. 3091280 261,00 $
IML-RESI B400 (Ø 3,0 mm tip / length: 574 mm, rotatable) Item No. 3081410 275,00 $
IML-RESI B-Series DisposablesIML-RESI B-Series
Standard Drilling Needles
With special and improved surface coating (10 pieces per pack)
IML-RESI B300 (Ø 3,0 mm tip / length: 429 mm) Item No. 3051280 246,00 $
IML-RESI B400 (Ø 3,0 mm tip / length: 549 mm) Item No. 3051410 261,00 $
IML-RESI B1000 (Ø 3,0 mm tip / length: 1280 mm) Item No. 3051950 326,00 $
Thermal-Paper Rolls
Thermal-Paper Rolls for IML-RESI B-Series (10 pieces per pack)
Thermal-Paper Rolls Item No. 3000450 76,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
31
Chargers for IML-RESI SystemsIML-RESI MD300, PD-Series, F-Series, M-Series, E-Series
Fast Charger 110V
For all batteries in the MD, F, M and E series, except premium batteries with Li-Ion technology. For batteries with a voltage of 7,2V - 14,4V
Fast Charger 110V Item No. 30009911 334,00 $
Fast Charger for Premium Batteries with Li-Ion Technology 110V - 220V
Only for premium 18V batteries with Li-Ion technology in the MD, F and PD series
Fast Charger 220V for 18V Li-Ion Premium Batteries Item No. 30009932 246,00 $
Fast Charger 110V with US Plug for 18V Li-Ion Premium Batteries Item No. 30009934 268,00 $
Standard Charger 110V with US-Plug
For all batteries in the MD, F, M and E series, except premium batteries with Li-Ion technology. For batteries with a voltage of 4,8V - 12V
Standard Charger 110V with US-Plug Item No. 30009916 246,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
32
IML Fractometer I
IML Fractometer I Item No. 4000100 1.153,00 $
Bending strength measurement
The IML Fractometer I measures the bending strength of a previously removed wood core sample. The measuring range extends over 150FU (fractometer units). Different bending forces are adjustable by means of an adjustment wheel.
Scope of delivery:• Fractometer I• Leather pouch• Instructions Manual
IML Fractometer I
IML Fractometer I
IML Fractometer II
IML Fractometer II Item No. 4000200 2.590,00 $
IML Fractometer II with aluminium transport case, foam insert and key Item No. 4000202 2.865,00 $
Bending and compression strength measurement
The IML Fractometer II measures the bending and com-pression strength of a previously removed wood core sample.
Scope of delivery:• Fractometer II• Cutting knife• Tweezers• Cutting boards• Test pin• Instructions Manual
IML Fractometer II
IML Fractometer II
Innovative Wood Testing Systems for Trees and Timber Structures
33
IML Fractometer II Complete Set
IML Fractometer II Complete Set Item No. 4000250 3.400,00 $
Bending and compression strength measurement
The IML Fractometer II measures the bending and com-pression strength of a previously removed wood core sample.
Scope of delivery:• Fractometer II, cutting knife, tweezers, cutting board,
test pin, instructions manual• Jim-Gem increment borer (drilling depth 400 mm) with
instructions manual• Extension and pull-off loops for the taking core
samples• IML probing rod with extension (length 900 mm)• Maintenance kit with 6 x wooden supporting battens,
1x glue can, 1x oil can, 1x ejector for cores, 1x grinds-tone for interior of drill, 1x grindstone for exterior of drill, 1x cleaning brush with extension and 2x spare bolts for increment borer
• Aluminium transport case with foam insert and key
IML Fractometer II
IML Fractometer II Complete Set
Innovative Wood Testing Systems for Trees and Timber Structures
34
‚Jim-Gem‘ Increment Borer
‚Jim-Gem‘ Increment Borer Drilling depth 400 mm Item No. 4000121 340,00 $
Extraction of core samples
‚Jim-Gem‘ increment borers are used for taking core samples and thus checking the quality of the wood and measuring the growth rate of trees. The increment borers are manufactured from special steel and Teflon coated to prevent friction heat (important for inspecting standing / sap conducting trees).
• Drilling depth: 400 mm• Cutting edge: 3-helical• Core diameter: 5,0 mm
Scope of delivery:• Increment borer with shank, drill and needle• Instructions Manual
‚Jim-Gem‘ Increment Borer
‚Jim-Gem‘ Increment Borer
Extension and Pull-Off Loops
Extension to increase the leverage effect when screwing the increment borer in and out
Extension and Pull-Off Loops for ‚Jim-Gem‘ Increment Borer Item No. 4000145 218,00 $
Optional Accessories‚Jim-Gem‘ Increment Borer
Ejector
Ejector for damage-free extraction of the drill cores from the increment borer
Ejector for ‚Jim-Gem‘ Increment Borer Item No. 4000128 22,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
35
Maintenance Set
Maintenance set for Jim-Gem Increment Borer, individual or complete set.
Scope of delivery for individual maintenance set:1x ejector for drilling cores, 1x grinding wheel for drills inside, 1x grindstone for interior of drill, 1x grindstone for exteri-or of drill, 1x oil can, 1x cleaning brush with extension and 2x spare bolts
Scope of delivery for complete maintenance set:‚Jim-Gem‘ Increment Borer (drilling depth: 400 mm, 3-helical blade) with shank, drill and needle, 1x ejector, 1x grindsto-ne for interior of drill, 1x grindstone for exterior of drill, 1x oil can, 1x cleaning brush with extension, 2x spare bolts and 6x supporting battens of wood with glue can
Individual Maintenance Set Item No. 4000127 167,00 $
Complete Maintenance Set Item No. 4000126 515,00 $
Optional Accessories‚Jim-Gem‘ Increment Borer
Innovative Wood Testing Systems for Trees and Timber Structures
36
IML Micro Hammer
IML Micro Hammer with 1 microsensor Item No. 41002004 4.040,00 $
IML Micro Hammer with 3 microsensors Item No. 41002005 4.960,00 $
Sound Velocity Measurement
The IML Micro hammer detects early decay at various stages as well as ring shake, cracks and hollows. A ham-mer will generate a pulse that is detected and measured by microsensors.
Application areas:• Tree care and inspection to maintain safe parks, road-
ways and forests• Assessment of tree damage and the residual wall thick-
ness
IML Micro Hammer
IML Micro Hammer
Add-on Module RCI (Remote Control Interface)
Interface for configuration, control and transfer data to and from internal client software (not using of M tools). The data may be further processed directly by the client software.
Add-on Module RCI (Remote Control Interface) Item No. 3100807 1.430,00 $
Optional add-onsIML Micro Hammer
Scope of delivery:• Electronic unit in a shock-resistant, water-proof housing• Hammer (pulse generator) and microsensor (pulse receiver)• 10x stainless steel fixing screws • 4x magnets for sensor mounting• USB data transfer cable with Bluetooth USB-Adapter• Charger 110V - 240V• Bosch Mini Cordless Screwdriver IXO 3,6V with charger and manual• Aluminium transport case• Instructions Manual• IML Software Center M-Tools Functions: Configuration and readout of the electronic unit, transmission, evaluation and storage of measurement data on a PC or handheld device
Innovative Wood Testing Systems for Trees and Timber Structures
37
Spare PartsIML Micro Hammer
Hammer
Replaceable hammer for IML Micro Hammer
Hammer Item No. 4100109 587,00 $
Microsensor
Replaceable microsensor for IML Micro Hammer
Microsensor Item No. 4100110 536,00 $
Magnetic Impact Cap
Magnetic impact cap for IML Micro Hammer
Magnetic Impact Cap Item No. 4100107 19,00 $
Magnet Set
Spare magnet with two mounting screws for IML Micro Hammer
Magnet Set Item No. 4100106 14,00 $
Mounting Screws
Stainless steel mounting screws, length 60 mm / Ø 4 mm (10 pieces per pack)
Mounting Screws Item No. 4100108 27,00 $
Bosch Mini-Screw Driver IXO Li-Ion
Mini-Screw Driver to insert mounting screws for IML Micro Hammer, incl. charger and manual
Bosch Mini-Screw Driver Li-Ion 3,6V Item No. 4100111 123,00 $
Innovative Wood Testing Systems for Trees and Timber Structures
38
Charger with USB Connector (110V - 240V)
Charger for IML Micro Hammer
Charger with USB Connector Item No. 4100011 93,00 $
Bluetooth USB Adapter with USB Cable
USB adapter for wireless Bluetooth connection and USB connection cable (length: 185 cm) for IML Micro Hammer
Bluetooth USB Adapter with USB Cable Item No. 4100012 77,00 $
Bluetooth USB Adapter
USB adapter for wireless Bluetooth connection for IML Micro Hammer
Bluetooth USB Adapter Item No. 4100013 52,00 $
Spare PartsIML Micro Hammer
Innovative Wood Testing Systems for Trees and Timber Structures
39
IML Measuring Table
IML Measuring Table without Microscope Item No. 5000200 4.635,00 $
IML Measuring Table incl. Leica S6E L2 Zoom Stereo Microscope Item No. 5000202 8.970,00 $
IML Measuring Table incl. Digital Microscope DigiMicro 1.3 Item No. 5000203 5.055,00 $
Annual Ring Analysis
The IML Measuring Table is used for studying the growth rate of wood samples. An easy-to-use electronic unit hel-ps do the evaluation, as well as 2 optional microscopes for analysis of very low growth rates.
IML Measuring Table
IML Measuring Table
Scope of delivery:• Measuring Table• Electronic unit with serial data transfer cable and char-
ger 110V-240V• 2x recording strips for cores (wood support strips)• Instructions Manual• IML Software Center T-Tools PRO Functions: Configuration and readout of electronic unit, transfer, evaluation, storage, magnification and printing of measurement data on a PC or laptop
Leica S6E L2 Zoom Stereo Microscope:incl. mounting on IML measuring table
• Viewing angle: 38°• Lens: 0,63x, achromatic• Magnification: max. 40x zoom• Max. resolution: 432 LP/mm• Max. aperature: 0144 nA• Field of view / distance: 36,5 mm / 55 mm
Digital Microscope DigiMicro:incl. adjustable bracket on IML Measuring Table
• Image resolution: 1280 x 960• Dual Axis: 27x and 100x microscope lens• Magnification: max. 200x zoom• Focus: 10 mm to infinity• Video mode: max. 30 fps at 600 Lux• Shutter speeds: 1 sec. up to 1/1000 sec.
The IML Measuring Table can be optionally extended with 2 microscopes, an analogue and a digital version
IML Measuring Table with Leica Microscope
Innovative Wood Testing Systems for Trees and Timber Structures
40
Service and Calibration
Service for IML-RESI PD-Series Item No. 8888PD 340,00 $
Service for IML-RESI F-Series (without electronic unit) Item No. 8888F 230,00 $
Service for IML-RESI F-Series (with electronic unit) Item No. 8888FE 326,00 $
Service for IML-RESI E-Series Item No. 8888E 340,00 $
Service for IML-RESI M-Series Item No. 8888M 275,00 $
Service for IML-RESI B-Series Item No. 8888B 470,00 $
Service for IML Fractometer I Item No. 8888FR 125,00 $
Service for IML Fractometer II Item No. 8888FR 125,00 $
Service for IML Micro Hammer Item No. 8888I 195,00 $
Annual service inspection
In order to guarantee the measuring accuracy of IML pro-ducts, regular maintenance and calibration of measuring instruments should be carried out by our qualified service team. The inspection of measuring instruments should be carried out at yearly intervals.
Service and Calibration
Service and Calibration of IML Products
An inspection includes:• Complete function and safety test• The unit is disassembled, the functional parts precisely controlled and checked• All mechanical moving parts are cleaned and permanently lubricated with special LongLife oil• Implementation of test measurements and final calibration• Creation of a detailed service report and a calibration sheet / test report
Innovative Wood Testing Systems for Trees and Timber Structures
41
IML Tree Labels
Setup costs for lasering per order 40,00 $
IML Tree Labels 100 pieces per piece 1,45 $
IML Tree Labels 250 pieces per piece 1,30 $
IML Tree Labels 500 pieces per piece 1,15 $
IML Tree Labels 1.000 pieces per piece 1,10 $
IML Tree Labels 2.500 pieces per piece 1,05 $
IML Tree Labels 5.000 pieces per piece 1,00 $
IML Tree Labels 10.000 pieces per piece 0,95 $
Aluminium Tree Labels
IML Tree Labels made of anodized aluminium.The aluminium plates labelled using laser technology according to your requirements are very easy to read. The anodized coating ensures a long service life and durability. The IML Tree Labels are available in black, red, green, and blue. The Tree Labels are made from scratch-resistant and weatherproof (AlMg1) aluminium, the white laser lettering (black lettering for silver tree tags) means they are easy to read in the sunlight. The tree tags can be individually laser-labelled to your specifications, also on both sides.
Item No. 4000170
Label: • Continuously numbered and optionally with additional
text• Logo or Symbol• Data Matrix or QR-Code• Number ranges or Excel list
IML Tree Labels
IML Tree Labels
Dimensions:• Diameter: 35 mm• Thickness: 1 mm• Mounting hole: 3 mm• Label field: 30 mm x 25 mm
Innovative Wood Testing Systems for Trees and Timber Structures
42
IML Probe Rod
IML Probe Rod Standard Length 600 mm Item No. 4000147 53,00 $
Extension for IML Probe Rod Length 300 mm Item No. 4000148 17,00 $
Tree Inspection Accessories
The IML Probe Rod assists you locate decay in trees. The robust stainless steel rod can be extended by up to 1500 mm by a threaded fitting. The standard length is 600 mm and the diameter is 7,0 mm. The IML Probe Rod also has a 100 mm scale.
IML Probe Rod with extension
IML Probe Rod
IML Inspection Rod
IML Inspection Rod Length 800 mm Item No. 4000146 18,00 $
Tree Inspection Accessories
The IML Inspection Rod helps you locate decay in trees. Length: 800 mm; Diameter: 5,0 mm.
IML Inspection Rod
IML Inspection Rod
Innovative Wood Testing Systems for Trees and Timber Structures
43
Caliper
Caliper Item No. 4100048 38,00 $
General Accessories
Calipers are used to determine the diameter of wooden poles, playground equipment, trees or timber beams. The measuring tool has an easily legible scale on each side, easily visible in the sunlight. The scale has a range of up to 32 cm.
Caliper
Caliper
IML Penetrometer
IML Penetrometer Item No. 4000149 406,00 $
Tree Inspection Accessories
The IML Penetrometer is a mechanical gauge to determi-ne the density of the soil. A 2.0 kg heavy falling weight is mounted on a 8.0 mm thick rod. The falling weight is dropped and encounters resistance, causing the rod to penetrate the ground. The penetration depth can be read by means of a scale.
IML Penetrometer
IML Penetrometer
Innovative Wood Testing Systems for Trees and Timber Structures
44
Heel
Heel Item No. 4100049 12,00 $
General Accessories
Heels are used to uncover wooden poles, playground equipment and trees. The exposed measuring object allows you to easily make a measurement at a specific angle. The heel is made of lightweight and durable plastic and is therefore very comfortable to use and transport.
Heel
Heel
Stainless Steel Model
Stainless Steel Model Item No. 4000135 36,25 $
Multi-purpose tool by Prof. Dr. Claus Mattheck and Dr. Klaus Bethge
The stainless steel model is an multi-purpose tool for tree diagnosis. This tool measures the slenderness of tree trunks and branches. It may also be a non-dogmatic guide for shaping the crown of a tree according to the shape of brook pebbles. The model can show the highly loaded space under the tree determined with the force core method.
Stainless Steel Model
Stainless Steel Model for Tree Diagnosis
Innovative Wood Testing Systems for Trees and Timber Structures
45
Hazard Beam
Hazard Beam Item No. 4000132 54,00 $
Wood Model by Prof. Dr. Claus Mattheck
The hazard beam shows the emergence of a hazard beam crack on trees.
Hazard Beam
Hazard Beam
Height Measurement Tool
Height Measurement Tool Item No. 4000134 71,00 $
Complete Set Height Measurement Tool and Hazard Beam Item No. 4000138 114,00 $
Wood Model by Prof. Dr. Claus Mattheck
This survey tool provides an approximate measurement of tree height, but especially of the H/D ratio (degree of slenderness) of trees, co-dominant stems and also bran-ches.
Height Measurement Tool
Height Measurement Tool
Innovative Wood Testing Systems for Trees and Timber Structures
46
‚Stupsi Explains the Tree‘
‚Stupsi Explains the Tree‘ Item No. 3000015e 30,00 $
Technical Literature
A hedgehog tells us all about the body language of trees. (4th revised edition)
Author: Prof. Dr. Claus MattheckISBN: 978-3-923704-72-9
Price incl. 7% VAT
‚Stupsi Explains the Tree‘
‚Stupsi Explains the Tree‘
‚The Face of Failure in Nature and Engineering ‘
‚The Face of Failure in Nature and Engineering‘ Item No. 3000020e 55,00 $
Technical Literature
Form and failure in nature and technology.
Author: Prof. Dr. Claus MattheckISBN: 978-3923704415
Price incl. 7% VAT
‚The Face of Failure in Nature and Engineering‘
‚The Face of Failure in Nature and Engineering ‘
Innovative Wood Testing Systems for Trees and Timber Structures
47
‚Updated Field Guide for VTA‘
‚Updated Field Guide for VTA‘ Item No. 3000022e 55,00 $
Technical Literature
Author: Prof. Dr. Claus MattheckISBN: 978-3923704583
Price incl. 7% VAT
‚Updated field guide for VTA‘
‚Updated Field Guide for VTA‘
Innovative Wood Testing Systems for Trees and Timber Structures
‚Thinking Tools after Nature‘
‚Thinking Tools after Nature‘ Art.-Nr. 3000024e 60,00 $
Technical Literature
Extremely simple, no formulae!
Author: Prof. Dr. Claus MattheckISBN: 978-3-923704-73-6
Price incl. 7% VAT
‚Thinking Tools after Nature‘
‚Thinking Tools after Nature‘
48
‚Pauli the Bear: Tree Mechanics‘
‚Pauli the bear: Tree mechanics‘ Item No. 3000019e 35,00 $
Technical Literature
Explained in the sensitive words of Pauli the Bear.
Author: Prof. Dr. Claus MattheckISBN: 978-3923704392
Price incl. 7% VAT
‚Pauli the Bear: Tree Mechanics‘
‚Pauli the Bear: Tree Mechanics‘
Innovative Wood Testing Systems for Trees and Timber Structures
‚Manual of Wood Decay in Trees‘
‚Manual of Wood Decay in Trees‘ Item No. 3000018e 58,00 $
Technical Literature
Brief description of the most important fungi on trees.
Author: Prof. Dr. Claus MattheckISBN: 978-3923704286
Price incl. 7% VAT.
‚Manual of Wood Decay in Trees‘
‚Manual of Wood Decay in Trees‘
49
‚Secret Design Rules of Nature ‘
‚Secret Design Rules of Nature‘ Item No. 3000021e 55,00 $
Technical Literature
Ideal shapes without a computer.
Author: Prof. Dr. Claus MattheckISBN: 978-3923704538
Price incl. 7% VAT
‚Secret Design Rules of Nature ‘
‚Secret Design Rules of Nature ‘
Mattheck iPad AppTechnical Literature
With this iPad app you can read the popular science car-toons by Prof. Dr. Claus Mattheck in a printed version. In the app store, you will find interesting books and publica-tions, as well as free extracts. The app is available for free in the Apple App Store.
Mattheck iPad App
iPad App for Mattheck Books
Innovative Wood Testing Systems for Trees and Timber Structures
50
General Conditions of Payment and Delivery IML North America, LLC.
I. GeneralThe following Terms and Conditions apply to all – including future - transactions with the customer. Any General terms and conditions of the customer shall not apply. We hereby expressly object to the validity of such conditions Ancillary agreements require the written form in order to be valid
II. Prices, Shipping, Payment1. Unless otherwise specified, prices shall be in euro and per piece. They shall apply ex works, excluding costs for packaging, postage, freight, insurance, plus statutory value added tax (within Germany). All prices are subject to change.2. Prices in our offer shall apply only to the order data on which the offer is based. Subsequent changes or additions at the customer›s request, as well as the resulting additional costs, shall be charged additionally.3. The goods shall be paid for within 30 calendar days from the date of the invoice, without any deductions.4. The delivery shall take place ex works and at the expense and risk of the customer. The goods shall be shipped at the customer›s request and at his risk and expense. Should shipment of the order be impossible through no fault of our own, the risk pas-ses to the customer upon notification of the readiness for dispatch. We are liable only for intent and gross negligence.5. No discount is granted for cash payments. The customer shall bear all costs incurred in the submission and acceptance of bills of exchange and cheques.
III. Delay of Payment1. In case of a delay of payment, we are entitled to charge the customer for the credit costs we have incurred. We reserve the right to claim further default damages.2. If instalments or bills of exchange have been agreed upon, the respective outstan-ding receivable is due immediately if the customer falls into arrears on more than 2 payments.3. In the case of the delay of more than 2 payments, we are entitled to withdraw from the contract.4. Should the fulfilment of our payment claim be endangered due to a deterioration of the financial situation of the customer, which has occurred or become known to us after conclusion of the contract, we are entitled to demand payment in advance and immediate payment of all open invoices not yet due, as well as withhold goods not yet delivered until payment, and stop the processing of current orders. We are also entitled to said rights if the customer does not make payment despite a reminder.
IV. Retention of Title1. We reserve the ownership of the goods until full payment of all claims from the business relationship with the customer.2. Should the goods delivered by us be compounded, mixed or blended with other goods, we acquire co-ownership of the new item in proportion to the value of our goods to the value of the other compounded, mixed or blended goods. Should the ownership of the goods cease to exist because it has become an integral part of another item, the customer already now grants us co-ownership of the principal item which is proportional to the value of the goods supplied compared to the value of the principal item. Co-ownership is already transferred to us, whereby handover is replaced by agreeing on a safekeeping relationship, on the basis of which the custo-mer keeps the principal item safe for us at his own expense. Upon payment of the accounts receivables, the co-ownership thus granted is transferred to the customer. 3. The customer is permitted to sell on the goods in an orderly business transaction during the course of his business operations. He is not entitled to pledge or assign the goods. We can revoke this authorisation if the customer falls into arrears of payment or economic distress, in particular if insolvency proceedings are opened against his assets.4. In the event that the new object is sold then the customer hereby assigns to us, for the security of our claims arising from the whole of the business relationship, his claim against the customer arising from its resale. The customer may at any time be required by us to provide information about the stock of assigned goods and grant us, or a person authorised by us, access to the relevant business documents. The customer is entitled to collect but not to assign the receivables to a third party. We are entitled to prohibit the collection of the receivables if the customer is in delay of payment, faces financial collapse, or judicial insolvency or composition proceedings are to be opened over his assets. If the overall amount of the assigned claims – in so far as unquesti-onable and feasible – exceeds our outstanding claims by more than 10 %, we are obliged, at the request of the customer, to assign on a pro rata basis the individual receivables with the respective excess amount to the customer.5. Contrary to No. 3, the customer shall not be entitled to sell the goods in the course of normal business transactions if he excludes the assignment of the receivables from the sale of the goods to us.6. If the customer is in arrears with payment, we are entitled to take back the goods.7. If the customer is a registered merchant, we shall also be entitled to take back and realise the goods after a prior warning in the case of default in payment on the part of the purchaser. The proceeds from the realisation shall be offset against the buyer›s liabilities.
V. Delivery Time1. Delivery dates shall not be binding unless they have been expressly confirmed in writing.2. Should timely delivery not be possible as a result of delayed or incorrect delivery from our suppliers, and we are not responsible for this circumstance, or should per-formance be impossible due to force majeure, acts of war, unrest, strikes, lockouts, sovereign interventions, destruction or damage of our production and operating equipment, for we cannot be held responsible, we shall be entitled to postpone the delivery or service by the period of the delay plus a reasonable starting period or to withdraw from the contract - in so far as not yet performed - partly or completely.
VI. Notification PeriodThe customer shall inspect the goods immediately upon receipt and, should the goods have obvious defects, notify us about said defects within a period of 2 weeks after receipt of the goods, or after handover by the freight forwarder in the event of dispatch; otherwise, the customer’s claims due to defects shall be excluded. In all other cases, deficiencies may be claimed only within the period of one year. The beginning of the period is the legal beginning of the limitation period (emergence of the claim).
VII. WarrantyOur products are warranted to be free of defects for a period of 1 year. The beginning of the period is the legal beginning of the limitation period (emergence of the claim).In the event of defects, we shall be entitled at our discretion to subsequent perfor-mance (rectification/replacement) up to the amount of the order value, unless there has been intent or gross negligence by ourselves or our vicarious agents. If a twofold attempt at subsequent rectification or replacement fails twice, or if rectification or replacement is impossible or unacceptable to the customer, or if we definitively refuse to said subsequent performance, the customer is entitled to demand a reasonable reduction in the price or withdraw from the contract.After fruitless expiry of a time limit previously fixed for subsequent performance, the customer is entitled to claim damages under the conditions set forth in § 437 No. 3, § 634 No. 4 BGB (German Civil Code), to the extent we are responsible for intent or gross negligence (with the exception of bodily injury).
VIII. DamagesWe are liable for all damages arising from culpable breach of contract if we ourselves or our vicarious agents are at fault, but only in case of damage by intention or gross negligence (with the exception of personal injury). The above also applies - insofar as legally permissible - also in the event of default or impossibility of performance. Liability for indirect damages is excluded should we be also liable for damages due to breach of contract based on minor negligence on our part or that of our vicarious agents. For damages caused by delay in our performance, we shall only be liable up to the amount of the order value (self-rendered services minus advance performance and material) if we or our vicarious agents are only culpable of minor negligence.
IX. Acceptance The customer shall accept the goods on the agreed completion date. If the customer is in default of acceptance, notwithstanding Section II. 3, the price agreed upon shall be due immediately. The customer is obliged to pay in advance any costs incurred for storage and insurance. If the customer does not meet this obligation, we are entitled to withdraw from the contract and to make other use of the goods, whereby the sales revenues gained in this case are credited to the price agreed upon. We are entitled to receive compensation for the lost profit.
X. Property The operating materials used by us for the manufacture of the product to which the contract relates, in particular special means of production (tools, devices, etc.) remain our property and shall not be delivered.
XI. Set-OffA set-off may only be exercised with a claim that is undisputed or determined by law. The customer shall only have a retention right as regards claims from the same con-tractual relationship.
XII. Applicability of German Law The law of the Federal Republic of Germany shall apply exclusively.The application of the uniform law governing the international purchase of movable objects and the law governing the conclusion of international purchase contracts for movable objects is excluded.
XIII. Place of Performance and Jurisdiction Place of performance and exclusive place of jurisdiction for business with registered traders is Heidelberg. However, we shall also be entitled to take action at the general legal venue. Should any provision of these Terms and Conditions or a provision within the framework of other agreements be or become invalid, the remaining provisions or agreements shall remain unaffected. The invalid or unenforceable provision shall be replaced by a legally effective provision which comes closest to the meaning and purpose of the invalid provision.
Innovative Wood Testing Systems for Trees and Timber Structures
IML North America, LLCMail: PO Box 1363, Center Harbor, NH 03226Ship: 15 Glidden Rd., Moultonborough, NH 03254USA
Phone: 603-253-4600E-Mail: [email protected]: www.iml-na.com