price manual number 2020-01

PRICE MANUAL NUMBER 2020-01

1466 Delberts DriveMonongahela Pa 15063

(P) 800-826-2672 / (P) 724-258-6622

(F) 724-258-6692

www.tamcotools.com [email protected]


Oiling is the most important step in tool maintenance

Blow out moisture in air line BEFORE connecting the tool

Examine tool for loose bolts, nuts, handles,

side-rods, retainers

Check air connections / fi ttings – for damage

On rivet busters, check sleeves, bumpers, springs

Check chisel / points for shank wear

Run tool at proper PSI (90 PSI)

When running air tool, always keep against the work surface

Always disconnect tool from airline when changing

steel or performing maintenance

At end of day fl ush the tool with oil and cycle a few

times to lubricate internal parts for storage

Store in a dry location

General Tool Maintenance

General Information and Terms of Sale 2Boom Mounted Demolition Tools 3Air Tools - Paving Breakers 4-5Air Tools - Clay Diggers / Trenchers 5Air Tools - Rock Drills 6Air Tools - Rivet Busters and Tampers 7Air Tools - American Made Rivet Busters 8Air Tools - Chipping Hammers 9New Items! Light Duty Air Hammer & Wizard 10Air Tools - Scabbler and Scabbler Accessories 10Air Tools - Weld Flux and Needle Scalers 11Air Tools - Rammers 11New Items! Impact Wrenches 12New Items! Manifolds &Dust Collection Units 13Air Tool Accessories 14-16Weld Flux/Miscellaneous Scaler Steel 17Electric Demo Hammer Steel 18Paving Breaker Steel 19-21Paving Breaker Accessories 22Chipping Hammer Steel 23-24Rivet Buster Steel 24-25Detachable Bit Hollow Drill Steel 26Threaded Rock Bits 27Whirlibit - Speed Drills 28Carbide Tipped Hollow Drills 29Hand Tools 30-31Maintenance Bars 32

Table of Contents

1-800-826-2672 P www.tamcotools.com 724-258-6692 F

Table of Contents

www.tamcotools.com

Terms of SaleThis price manual supercedes all other catalogs and/or price lists. All prices are subject to change without notice.

Shipping TermsFOB: Shipping Point (unless noted otherwise at time of sale)Minimum Invoice: $50.00 Net, this excludes freight and tax where applicableReturned Goods: Tamco will not accept returns without prior authorization. All returns are subject to a 25% restocking fee. No credit will be issued without proper documentation. All material must be returned in new condition.

Shortages and/or DamagesNever accept any shortaged or damaged shipments without making a notation on the bill of lading.Tamco Inc., must be notifi ed promptly of any shortages/damages or claims will not be considered.Tamco Inc., cannot be held responsible for delivery delays due to strikes, fi res, or other conditions outside of our control. Our responsibility ceases when goods are received by freight carriers in new condition.All published weights are approximate. Actual shipping weights may vary.

Credit Policy1. Tamco’s credit terms are 1% -10 days, Net 30 days. (This discount applies only to merchandise; all freight charges are due in

full.)2. Repeated deviations or violation of our 30 day terms will result in an account being placed on credit hold and/or COD status.3. Accounts with invoices unpaid beyond 60 days will be placed on credit hold and no further tools or parts will be sold until the

account is current (No invoices open beyond 30 days).4. In the event collections are required, the customer is responsible for all costs of collection.

Pneumatic Tool Limited WarrantyTamco Inc., warrants its pneumatic tools to be free of defects in materials and workmanship, to the original purchaser, for a period of one year from the date of purchase. This warranty will not apply to any tool which Tamco Inc., deems to have been abused, modifi ed, misused, improperly maintained, inadequately lubricated, or repaired by anyone other than an authorized Tamco repair house. Authorization to return any pneumatic tool for evaluation must be obtained from Tamco’s customer service staff prior to return. All returns must be shipped prepaid to:

Tamco, Inc.1466 Delberts Drive

Monongahela, PA 15063No collect shipments will be accepted. Pneumatic tools shipped without authorization will be returned to the customer. Tamco Inc., guarantees to repair or replace (at Tamco’s discretion) pneumatic tools at no charge to the original purchaser if defects in materials or workmanship exist at the time of inspection. Tamco Inc., makes no other expressed and/or implied warranty. Under no circumstances will Tamco Inc., be liable for damage to property or person, death, consequential, incidental, indirect or special damages of any nature arising from the sale or use of pneumatic tools.

General Tool WarrantyTamco Inc., products are guaranteed against defects and workmanship. Tamco Inc., cannot be responsible for failures due to normal wear. Any product that has been modifi ed, misused, abused, or suff ered a lack of proper maintenance will not be recognized for a warranty claim. Warranty consideration will be given to any product found to have defects in work-manship or materials at the time of inspection. No other warranty is expressed or implied. Never use a tool for a purpose other than it’s intended or designed use.

Safety Warnings and Cautions1. ALWAYS wear approved safety gear such as hearing protection, safety glasses, hard hats, and safety shoes when using

tools. 2. ALWAYS use the proper tool for the job. Do not use any tool other than the manner in which it was intended or designed.3. NEVER strike a tool designed for an air hammer with a hand held hammer.4. NEVER use a pneumatic tool for prying. This can cause tool failure and/or operator injury.5. NEVER use a dull or improperly maintained tool. Failure to properly maintain tools will lead to tool failure and/or operator

injury.6. ALWAYS properly maintain air hammers. Worn parts, bushings, pistons, springs, etc can and will lead to premature tool

failure.7. ALWAYS warm tools prior to use in freezing temperatures.8. NEVER alter any tool in any way. This can cause tool failure and/or operator injury.9. ALWAYS use a silicon carbide grinding wheel on dull tools or drills with carbide cutting edges. Drills should be sharpened

regularly after drilling 25 or more holes, depending on the hardness and abrasiveness of the material. 10. NEVER allow a pneumatic hammer to run idly. This practice allows undue stress to build in the tool and can lead to

premature tool failure and/or operator injury.11. ALWAYS use tools in accordance with all OSHA and MSHA regulations.

General Information and Terms of Sale

2

3

Boom Mounted Demo Steel


KENT/FRD

ATLASCOPCO/EPIROC

BOBCAT STRIKER/TOKU

CHICAGOPNEUMATIC NPK OKADA

KF1/FX15 SB52 HB680 TNB-2M RX 3 GH2 TOP35KF2/FX25 SB102 HB880 TNB-3M RX 4 GH3 TOP45

KF3/KF3/FX35 SBU160 HB980 TNB-4M RX 6 GH4 TOP60KF4/FX45 SB202/SBU220 HB1180 TNB-5M RX 8 GH6 TOP100KF5/FX55 PB210 TNB-6E RX 11 GH9 TOP200KF6/FX65 SB302/SBU340 RX 25/26 GH10

KF12 SB452 RX 29 GH12KF19 SB552 RX 45/46 GH15KF27 MB500 GH18

FX125 MB700FX175 MB750FX275 MB1000FX375 MB1200FX475 MB1500

HB3000HB3600

Our Most Popular Models!

Call for pricing!We off er a line of Boom Mounted

Demo Tools for theseManufacturers:

Allied Atlas Copco/EpirocBobcat/Melroe Husky/IPC

Indeco Kent/FRDMagnum NPKOkada RammerStanley Teledyne

Toku/Striker Tramac

We currently stockthese brands:

Allied Atlas Copco/EpirocBobcat CP

Husky/IPC IndecoKent/FRD Magnum

NPK OkadaToku/Striker Toro-Dingo

Tramac

www.tamcotools.com

4

PB90 PB60 PB40 PB30Shank Size 1-1/8” x 6”

1-1/4” x 6”1-1/8” x 6”1-1/4” x 6”

1” x 4-1/4” 7/8” x 3-1/4”1” x 4-1/4”

Piston Stroke 6” (152mm) 4” (100mm) 5-3/4” (146mm) 3-11/32” (85mm)Piston Diameter 2-5/8” (66.67mm) 2-1/4” (57.15mm) 1-3/4” (44mm) 1-3/4” (44.45mm)Impact Rate 1,250 BPM 1,400 BPM 1,100 BPM 1,550 BPMWeight 92.4 lbs (42 kg.) 66 lbs. (30 kg.) 39.6 lbs. (18 kg.) 33 lbs. (15 kg.)Overall Length 28-1/2” (723mm) 25-3/8” (645mm) 26” (660mm) 22-1/4” (564mm)Air Consumption 77 CFM 70 CFM 56 CFM 49 CFMAir Inlet Thread 3/4” NPT 3/4” NPT 1/2” NPT 3/8” NPTHose Size 3/4” (19mm) 3/4” (19mm) 3/4” (19mm) 3/4” (19mm)

Toku paving breakers off er a rugged and reliable tool for whatever task you may have for them. Toku breakers are available in 30, 40, 60, and 90 pound classes. All Toku breakers feature a rugged four bolt back head, drop forged alloy steel construction, forged latch retainers, replaceable chuck bushings, and safety levers. Optional muffl ers are available.

Toku 30 and 40 pound hammers are the perfect size and weight for light to medium construction. These tools work great for demolishing black top, masonry walls, bridge decks, or digging in frozen soil.

The Toku 60 and 90 pound class breakers are designed with larger demolition jobs in mind. Whether it’s breaking rock, reinforced concrete, or pavement, these breakers have plenty of power to get the job done.

MAX PSI IS 90LBS.

Air Tools - Paving Breakers

PB90 PB60 PB40 PB30


www.tamcotools.com

TD30 CD30 CD20Shank Size 7/8” x 3-1/4”

1” x 4-1/4”7/8” x 3-1/4”1” x 4-1/4”

7/8” x 3-1/4”

Piston Stroke 3-11/32” (85mm) 3-11/32” (85mm) 2-3/8” (60mm)Piston Diameter 1-3/4” (44.45mm) 1-3/4” (44.45mm) 1-11/16” (42.85mm)Impact Rate 1,550 BPM 1,550 BPM 2,000 BPMWeight 36 lbs. (16.3 kg.) 30 lbs. (13.6 kg.) 22 lbs. (10 kg.)Overall Length 29” (736mm) 22” (559mm) 20” (520mm)Air Consumption 49 CFM 49 CFM 38 CFMAir Inlet Thread 3/8” NPT 3/8” NPT 1/2” NPTHose Size 3/4” (19mm) 3/4” (19mm) 3/4” (19mm)

When it comes to digging packed soil and clay from around forms, footers, or any other construction area, you can be sure Tamco has a Toku digger to fi t your needs. With three models to choose from, you are sure to fi nd the right tool for the job at hand. The TCD-30 and TCD-20 are D-handled tools that off er maneuverability and strength in a compact package. The TRC-30 off ers the comfort and control of a T-handle with the same power and performance as the TCD-30.

Toku diggers and trenchers feature four bolt back heads, drop forged alloy steel construction, forged latch retainers, replaceable chuck bushings, and safety levers. Optional muffl ers are available.MAX PSI IS 90LBS.

5

Air Tools - Clay Diggers / Trenchers

CD20CD30TD30


Air Tools - Paving Breakers Ergonomic Style

Toku paving breakers are now off ered with an ergonomic design! Toku breakers are available in 40 and 50 pound classes. These Toku breakers also feature a unique and refi ned technology to reduce vibration and noise levels based on 15 years of actual job site experience.The spring dampened back head removes 50% of the vibration without power reduction.The design of the muffl er reduces the noise level by 10dBA compared to a standard tool. MUFFLERS INCLUDED! MAX PSI IS 90LBS.

PB401SV

PB501SV

ERGONOMIC PB401SV PB501SV114 PB501SV118Shank Size 1” X 4-1/4” 1-1/4” x 6 1-1/8” X 6

Piston Stroke 5-3/4” (146 mm) 6” (56 mm) 6” (56 mm)Piston Diameter 1-3/4” (44 mm) 2” (50 mm) 2” (50 mm)Impact Rate 1,100 BPM 1,200 BPM 1,200 BPMWeight 43 (19.5 kg.) 62 (28 kg.) 62 (28 kg.)Overall Length 26” (654 mm) 28” (714 mm) 28” (714 mm)Air Consumption 50 CFM 49 CFM 49 CFMAir Inlet Thread 1/2” NPT 1/2” NPT 1/2” NPTHose Size 3/4” (19 mm) 3/4” (19 mm) 3/4” (19 mm)

www.tamcotools.com

6

TS55 TJ20 TJ15 THD1100N RD9CP

Shank Size7/8” x 3-1/4”7/8” x 4-1/4”1” x 4-1/4”

7/8” x 3-1/4”7/8” x 4-1/4”

7/8” x 3-1/4”7/8” x 4-1/4”

7/8” x 3-1/4” 3/4” RoundSlotted

Piston Stroke 2-9/16” (65mm) 1-15/16” (49mm) 1-3/4” (45mm) 1-7/32” (31mm) 1-3/8”Piston Diameter 2-5/8” (66.6mm) 2-11/16” (68mm) 2-1/8” (54mm) 1-1/2” (38mm) 1-1/4”Impact RateSpeed

1,800 BPM200 RPM

2,400 BPM200 RPM

2,450 BPM250 RPM

3,200 BPM350 RPM

3,400 BPM185 RPM

Weight 59.4 lbs. (27 kg.) 40.7 lbs. (18.5 kg.) 30.8 lbs. (14 kg.) 11.4 lbs. (5.2 kg.) 8 lbs. (3.63 kgs.)Overall Length 22-3/8” (568mm) 24-1/32” (610mm) 18-1/2” (468mm) 16-17/32” (420mm) 14-3/4”Air Consumption 91.81 CFM 87.5 CFM 56 CFM 28.3 CFM 20 CFMAir Inlet Thread 3/4” NPT 3/4” NPT 3/4” NPT 3/8” NPT 3/8” NPTHose Size 3/4” (19mm) 3/4” (19mm) 3/4” (19mm) 1/2” (12.7mm) 1/2” (12.7mm)

We off er multiple rock drills for a wide variety of applications. Whether you are drilling through rock, concrete, or brick, Tamco off ers a rock drill that will fi t your distinct requirements.

The Toku TS-55 rock drill has all the power needed for the biggest jobs. It features rugged construction and is designed for larger diameter bits and deeper drilling jobs.

The Toku TJ-20 and TJ-15 are mid-sized rock drills that pack a big punch. These drills are great for road building, shaft sinking, quarrying, as well as general demolition or construction work. Both models include standard, removable in line oilers.

The Tamco CP9-A and Toku THD-1100N are lightweight drills that are able to get into smaller spaces other drills cannot. These D-handled drills pack big power in a compact package. Recommended operation pressure is 80 - 90 PSI. Exceeding 90 PSI may cause internal damage.*** Due to rotation of the THD-1100N, this tool must use Whirlibit-Speed Drill Bits ONLY.***

All rock drills feature replaceable chuck bushings, drop forged alloy steel construction, and forged latch retainers. Muffl ers are available for the TJ-20, and TJ-15 models. TJ-20 and TJ-15 models include Clear-View in line oilers. MAX PSI IS 90LBS.

Air Tools - Rock Drills


THD-1100N ERGO HANDLE

www.tamcotools.com

Toku rivet busters are the ideal tool for any mid-sized demolition job you can throw at them. They perform under the toughest conditions, whether you’re demolishing bridge decks, parking garages, ripping tanks, cutting rivet heads, or any demolition work. These hard hitting tools simply perform.

The Toku line of rivet busters are available with goose-neck or D-handles, and are available for either small buster or jumbo buster steel. All Toku rivet busters feature drop forged alloy handles, outside or inside lever designs, heat treated alloy cylinders, exhaust defl ectors, and safety piston stoppers.

The Toku tamper is a rugged tool that comes with a steel tamping pad for compacting soil and substrate material around foundations, trenches, poles and other compacting applications. MAX PSI IS 90LBS.

7

Air Tools - Rivet Busters / Tampers

RB91HPRB-91HPD (D Handle)

RB110RB-110D (D Handle)

JET06

Shank Size 1-1/8” Shank 1-1/8” Shank N/APiston Stroke 8-15/16” (227mm) 11-15/16” (303mm) 5-1/2” (140mm)Piston Diameter 1-3/16” (30.2mm) 1-3/16” (30.2mm) 1-1/2”(38mm)Impact Rate 700 BPM 680 BPM 750 BPMWeight 32 lbs. (14.3 kg.) 35 lbs. (14.6 kg.) 39.6 lbs. (18.0 kg.)Overall Length 22-29/32” (582mm) 26” (660mm) 49”(1240mm)Air Consumption 36.0 CFM 32.9 CFM 35.2 C.F.M.Air Inlet Thread 3/8” NPT 3/8” NPT 1/2” NPTHose Size 1/2” (19mm) 1/2” (19mm) 1/2” (12.7mm)


Rivet BusterD-Handle

** D Handle - 30 lbs.

www.tamcotools.com

RB633 RB133 RB1133 RB90 / RB91 RB4181Shank Size 1-1/8” 1-1/8” 1-1/8” 1” / 1-1/8” 1-1/8”Bore 1-3/16” 1-3/16” 1-3/16” 1-1/16” (27mm) 1-3/16”Stroke 6” 8” 11” 9-27/32” (250mm) 11”Impact Rate 1100 BPM 960 BPM 850 BPM 900 BPM 720 BPMLength 20-1/2” 22” 25” 21-1/16” / 20-92/32 26”Weight 27.5 lbs. 30 lbs. 34 lbs. 28 lbs. 34.5 lbs.Air Inlet Thread 3/8” 3/8” 3/8” 3/8” 3/8”Air Consumption 26-29 C.F.M. 44 C.F.M. 39 C.F.M. 27.9 C.F.M. 39 C.F.M.Hose Size 1/2” 1/2” 1/2” 1/2” 1/2”

Air Tools - American Made


If an American made air tool is required for your job, this is your tool. Tamco rivet busters are manufactured domestically and are a great addition to your tool needs. These tools are manufactured by American craftsmen and manufactured using high quality U.S. made components.

The Tamco brand of rivet buster will perform tasks such as bridge-deck repair, vertical and / or horizontal concrete demolition, busting rivets and bolts, and for use on underground tanks.

Try the RB-4181 model for the really tough job. Available in gooseneck or optional “T” handle in 11” or 14”.

MAX PSI IS 90LBS.

8

RB633

RB133

RB1133

RB90/RB91

RB4181 RB4181T

www.tamcotools.com

9

THA1 THA2 THA3 THA4Shank Size .680” Round Shank or .580” Hex Shank with Round or Oval Collar (Please Specify)Piston Stroke 1” (25.4mm) 2-3/32” (51mm) 2-17/32” (64mm) 4-1/32” (102mm)Piston Diameter 1-1/8” (28.54mm) 1-1/8” (28.54mm) 1-1/8” (28.54mm) 1-1/8” (28.54mm)Impact Rate 2,500 BPM 2,300 BPM 2,200 BPM 1,800 BPMWeight 14.8 lbs. (5.9 kg.) 15.8 lbs. (6.2 kg.) 16.5 lbs. (6.8 kg.) 18.25 lbs. (7 kg.)Overall Length 15-9/32” (388mm) 16-1/4” (413mm) 17-23/32” (450mm) 18-29/32” (480mm)Air Consumption 28 CFM 29.75 CFM 31.8 CFM 33.25 CFMAir Inlet Thread 3/8” NPT 3/8” NPT 3/8” NPT 3/8” NPTHose Size 1/2” (12.7mm) 1/2” (12.7mm) 1/2” (12.7mm) 1/2” (12.7mm)

Toku’s THA series of gooseneck chipping hammers are available in 1” through 4” stroke lengths. The THA series utilizes a saw tooth connection between the handle and cylinder which provides a more secure, positive fi t. MAX PSI IS 90LBS.

Toku’s rugged TCH series of “D-handle” chipping hammers are available in 2” through 4” stroke lengths. All TCH series chipping hammers feature drop forged handles, replaceable bushings, heat treated alloy cylinders, and exhaust defl ectors. The TCH line of hammers features a rock solid four bolt handle for maximum reliability and durability which allows a sure grip in all conditions. The TCH series is designed to only operate when the chisel is in contact with the work surface to avoid excessive wear caused by dry fi ring.MAX PSI IS 90LBS.

Toku’s AA-0S chipping hammer proves bigger is not always better. It’s lightweight and compact size allows for greater fl exibility when working in tight spaces or small enclosures. The AA-0S is small on size but big on power.

AAOS TCH2 TCH3 TCH4 THR-(3 OR 4)Shank Size .680” Round Shank or .580” Hex Shank with Round or Oval Collar (Please Specify) Screw on RetainerPiston Stroke 1-13/16” (45mm) 2” (50.8mm) 2-1/2” (63.5mm) 4” (101.6mm) 4” (101.6mm)Piston Diameter 7/8” (22.2mm) 1-1/8” (28.54mm) 1-1/8” (28.54mm) 1-1/8” (28.54mm) 1-1/8” (28.54mm)Impact Rate 3,000 - 3,200 BPM 2,600 - 2,800 BPM 2,000 - 2,200 BPM 1,600 - 1,800 BPM 1,600 - 1,800 BPMWeight 7.9 lbs. (3.6 kg.) 18 lbs. (8.1 kg.) 19 lbs. (8.55 kg.) 20 lbs. (9 kg.) 22 lbs. (9.9 kg.)Overall Length 12-3/4” (374.65mm) 14-3/4” (374.65mm) 16” (406.4mm) 17” (431.79mm) 18-1/2” (431.79mm)Air Consumption 22.95 CFM 29.75 CFM 31.5 CFM 33.25 CFM 33.25 CFMAir Inlet Thread 3/8” NPT 7/8” x 24 Thrds/In NPT 7/8” x 24 Thrds/In NPT 7/8” x 24 Thrds/In NPT 7/8” x 24 Thrds/In NPT

Hose Size 1/2” (12.7mm) 1/2” (12.7mm) 1/2” (12.7mm) 1/2” (12.7mm) 1/2” (12.7mm)

Air Tools - Chipping Hammers


The Toku THA series chipping hammers feature alloy steel drop forged handles, replaceable bushings, heat treated alloy cylinders, reliable ring valve design, and exhaust defl ectors. Optional quick connect retainers are available for all models.

www.tamcotools.com

Scabbler and Scabbler Accessories


Tamco off ers a Triple-piston Scabbler for use in roughing up concrete and steel surfaces. The three piston action will help remove a variety of unwanted surface debris for a variety of applications, including

paint and rust removal.

SF-T3Triple Piston Scabblerbl

Bore 1” Length 11”Stroke 13/16” Weight 8.25 lbs.Impact Rate 5,200 B.P.M. Air Inlet Thread 3/8”Height 5-7/8” Air Consumption 15 C.F.M.

Triple Piston Scabbler AccessoriesPart Number Description List PriceSF-00146 Steel Piston $59.55SF-00146C Carbide Piston $127.80SF-00146REX Rexalloy Piston - Non Sparking/Spark Resistant $341.15

Steel Carbide Spark Resistant

10

Light Duty Air Hammer / Wizard - New!

RB-185DBore 1-3/16”Stroke 4”Impact Rate 1500 bpmLength 17-15/16”Weight 18.5 lbs.Air Inlet Thread 1/2”Rec’d Hose Size 1/2”Avg. Air Consumption 35 cfm

TAM-401Bore 0.75”Stroke 2-5/8”Impact Rate 3500 bpmLength 6-3/4”Weight 3.5 lbs.Air Inlet Thread 1/4”Rec’d Hose Size 3/8”Avg. Air Consumption 4 cfm

Rivet Buster Steel WizardLight Duty

.401 Shank

Our New .401 shank hammer has a lightweight aluminum handle for light chipping, casting and foundry work. Spring style retainer included. Optional deluxe quick change retainer available.

The Wizard is a hybrid demolition tool combining the best aspects of a chipping hammer and rivet buster. This tool is lightweight with good hitting power and control, making it a great option for horizontal and vertical applications. The Wizard uses Jumbo rivet buster steel and Jumbo accessories.

www.tamcotools.com

SF-A1L1 SF-A1L2 SF-A182NS SF-A182WFBore 1” 1” 15/16” 15/16”Stroke 1-1/8” 1-1/8” 1-1/16” 1-1/16”Impact Rate 4,600 B.P.M. 4,600 B.P.M. 4,000 B.P.M. 4,000 B.P.M.Length 17” 10” 18” 9”Weight 6.25 lbs. 4.20 lbs. 6.00 lbs. 4.00 lbs.Air Inlet Thread 1/4” 1/4” 1/4” 1/4”Air Consumption 12 C.F.M. 12 C.F.M. 13 C.F.M. 13 C.F.M.

The SF-A1L1 and SF-A1L2 weld fl ux and needle scalers utilize Cleco style steel and are available with standard throttles, push type throttles, or solid backhead type. The SF-A182 series of weld fl ux and needle scalers use Ingersoll-Rand style steel and are available with standard throttle, solid backhead, or pistol grip styles. Our line of weld fl ux and needle scalers use advanced materials for greater longevity and weight reduction. Tools convert from needle scaler to weld fl ux scaler quickly and easily. We also off er an imported version of the Cleco weld fl ux and needle scaler, as well as replacement parts and needles for all of the tools. MAX PSI IS 90LBS.(The SF-A1L1 and SF-A182NS come with a bag of 19 standard 7” needles. Part number S834024.)

Air Tools - Scalers / Rammers


Cleco IR

SF-1BA SF-2BAR SF-OBR SF-00BABore 1” 1” 1” 11/16”Stroke 4” 2-1/2” 2” 2”Taper/Diameter 0.802” 0.802”/.687” 0.802”/.645” S Taper/.460”Impact Rate 1,240 B.P.M. 1,725 B.P.M. 2,500 B.P.M. 1,600 B.P.M.Length 20-1/4” 15-1/4” 16-1/2” 11-3/4”Weight 10 lbs. 7.125 lbs. 6.65 lbs. 3.75 lbs.Air Inlet Thread 3/8” 3/8” 1/4” 3/8”Butt Diameter 2-1/2” 2-1/2” 2-1/2” 1-3/4”

Tamco off ers a variety of rammers for the job site, foundry, or mill. All tools feature heat treated alloy steel cylinders, innovative features and rugged construction. Tamco has the ideal tool for any of your compaction needs.

These rugged and reliable tools will provide years of service on any job site.

Optional steel or rubber heads are available for all Tamco rammers. MAX PSI IS 90LBS.

11

www.tamcotools.com

12 1-800-826-2672 P www.tamcotools.com 724-258-6692 F

Impact Wrenches - New!

7506SS 7508SS IW1DI IW15DISquare Drive 3/4” SQ Dual Retainer 1” SQ Dual Retainer 1” 1-1/2”Max Torque (Forward) 1800 ft-lbs 1800 ft-lbs 2000 ft-lbs 3000 ft-lbsMax Torque (Reverse) 2000 ft-lbs 2000 ft-lbs N/A N/AFree Speed 4600 rpm 4600 rpmLength 9” 9” 12-13/32” 14-1/2”Weight 13.5 lbs 13.5 lbs 22 lbs 33 lbsAir Inlet Thread 3/8” 3/8” 1/2” 1/2”Rec’d Hose Size 1/2” 1/2” 1/2” 1/2”Avg. Air Consumption 58 cfm 58 cfm 58cfm 70 cfm

TAMCO now off ers industrial grade, American made Impact Wrenches! Our 3/4” and 1” Impact Wrenches off er a stainless steel hammer case and twin hammer design for increased durability. These are one of the industry’s highest power-to-weight ratios. 100% made in the U.S.A. with non-corrosive materials, constructed to last in the fi eld.

These Heavy-Duty Impact Wrenches feature a twin hammer clutch for more power per pound, a pressure fed clutch lubrication system, two piece motor housing for easy maintenance, and a built-in muffl er for low noise. Also a direct drive for fast run down.

7506SS7508SS

IW1DI IW15DI

Also available with an outside trigger and open handle. The 1” model has a recommended hose size of 3/4”.

www.tamcotools.com


ITEM NUMBER

DESCRIPTION LIST PRICE

3P Dust Collection Pail, with 10’ Vacuum Hose $970.20CH-VDEX Chipping Hammer Vacuum Attachment $369.35CH-QC-VDEX Quick Change Retainer Chipping Hammer Series $369.35PB-RD-VDEX Paving Breaker/Rock Drill Vacuum Attachment $487.90RB-VDEX Rivet Buster Vacuum Attachment $369.35RH-VDEX Roto Hammer Vacuum Attachment $327.45SC-VDEX-1BL Needle Scaler Vacuum Attachment $369.352198-VDEX Bellow (O.A.L. 8”) $24.402199-VDEX-WP Water Plug for use with VDEX Attachments $102.40WS3 Water Suppression Kit, 3’ Hose with Mount $154.35

Dust Collection Units - New!BUST THE DUST with VDEX!

VDEX is the abbreviation for Vacuum Dust EXtraction system.

TAM3P

PB-RD-VDEX

2198-VDEX

WS3

Manifolds - New!

ItemNumber Outlets Capacity Working

PressureTest

PressureInletSize

TankDia. Weight

5G 4 5 gallon 200 psi 300 psi 1” 10” 36 lbs.15G 8 15 gallon 200 psi 300 psi 2” 12” 72 lbs.

Eliminate clutter and run just one hose to your worksite! Connect from four to eight pneumatic tools at once. Equipped with a gauge to monitor pressure. All models are stackable!!

These products meet or exceed all OSHA requirements for silica removal handling!VDEX attachments are the industry’s fi rst uniquely designed attachment for pneumatic tools.

Check out our website for videos and to request detailed information.

www.tamcotools.com


Whip ChecksPart Number Description List PriceWA2 Safety Cable - 1/4” x 38” - Fits hose sizes 1-1/2” to 3” $18.10 WB1 Safety Cable - 1/8” x 20” - Fits hose sizes 1/2” to 1-1/4” $9.75

Side Rod Kit SRKIT-60 OR SRKIT-90Part Numbers include:

Description List Price

131501017 / ..........131501016

Front Head Bolt for 90lb Paving Breaker / for 60 lb Paving Breaker

410241550130801043

Front Head Bolt Nut Front Head Bolt Spring

$79.65

410241560 Front Head Bolt Lock Washer

Assembled

Other model parts are available and in stock. Call for pricing!

RetainersPart Number Description List PriceT25119002 Oval Retainer - Solid Type (Fits Toku THA, THH, and TCH Series Chippers) $58.15T25119008 Round Retainer - Solid Type (Fits Toku THA, THH, and TCH Series Chippers) $65.65T25129103 Deluxe Quick Change Retainer (Fits Toku THA, THH, and TCH Series Chippers) $136.45Y10298230 Oval Retainer - Solid Type (Fits Toku AA-0S Series Chippers) $96.35Y10298230R Round Retainer - Solid Type (Fits Toku AA-0S Series Chippers) $96.35T2512906S Quick Change Retainer - Screw on Type (Fits Toku THR Series) NEW!!! $148.85

Latch Kit LKIT-60/90Part Numbers include:

Description List Price

410241610 Steel Retainer Latch131303048 Washer136301010R Bushing410241650 Plunger $103.95130801042 Spring410241620 Bolt134601019 Nut

Air Tool Accessories

14

Deluxe Quick Change Retainer

www.tamcotools.com



AccessoriesPart Number Description List PriceY10212300 Retainer Spring (Fits Toku THH, THA, TCH, and AA-0S Series Chippers) $1.70SF-01038 3/8” NPT x 1/2” Hose Barb Swivel Assembly $33.35SF-01040 7/8” x 24 Threads/In x 1/2” Hose Barb Swivel Assembly $21.80SF-01060 1/2” NPT x 1/2” Hose Barb Swivel Assembly $21.80SF-UF37 3/8” Female Universal Chicago Fitting $10.50SF-UM37 3/8” Male Universal Chicago Fitting $9.75SF-UF50 1/2” Female Universal Chicago Fitting $9.00SF-UM50 1/2” Male Universal Chicago Fitting $8.50SF-UF75 3/4” Female Universal Chicago Fitting $9.80SF-UM75 3/4” Male Universal Chicago Fitting $11.65

Muffl ersPart Number Description List Price41027187C Muffl er for a PB 90 $300.2541024187C Muffl er for a PB 60 $237.1041023187C Muffl er for a PB 40 $205.4541020187C Muffl er for a PB 30 $205.45430101Y1C Muffl er for a TJ-15 $147.90

Rivet Buster AccessoriesPart Number Description List

PriceT33210100 Jumbo Buster Upper Sleeves $13.25T33210300 Jumbo Buster Lower Sleeves $16.50T33210300S Jumbo Buster Lower Sleeves (Split) $19.30T33210400 Jumbo Buster Rubber Bumper $3.30T33210400PJR Jumbo Buster Poly Red Bumper $5.85T33219400 Jumbo Buster Lock Spring $2.50T33210400PJO Jumbo Buster Poly Orange Bumper $5.85

New!! Kits are now available!18741 Kit: Upper/Lower/Spring/Black Rubber Bumper $33.0018826 Kit: Upper/Lower/Spring/Red PolyBumper $36.35

(Assembled with steel)

Black RubberBumpers

Lock Spring

Upper Sleeve and Lower Sleeve

Air Tool OilPart Number Description List Price

ATOGL Air Tool Oil - One Gallon $29.25

Poly Orange or RedBumpers

ChicagoFitting

BarbSwivel

Assembly

All Weather!!

www.tamcotools.com



Whip HosesPart Number Description List

PriceWH5-3/8 5 foot Whip Hose - 3/8” NPT Swivel End, rated 250 PSI $65.05WH5-7/8 5 foot Whip Hose - 7/8” x 24” Thread/In Swivel End, rated 250 PSI $51.85WH10-3/8 10 foot Whip Hose - 3/8” NPT Thread/In Swivel End, rated 250 PSI $72.90WH10-1/2 10 foot Whip Hose - 1/2” NPT Swivel End, rated 250 PSI $62.35WH10-7/8 10 foot Whip Hose - 7/8” X 24” Thread/In Swivel End, rated 250 PSI $62.35AH50 50 foot Air Hose - 3/4” Hose w/Universal Fitttings, rated 300 PSI $75.25

In-Line OilersPart Number Description List

Price0L In-Line Oiler 1.4 Fluid Oz. $76.951L In-Line Oiler 3.7 Fluid Oz. $79.752L In-Line Oiler 11.0 Fluid Oz. $97.503L In-Line Oiler 16.0 Fluid Oz. $129.00430101V0J L0-15 Clearview In-Line Oiler 6.0 Fluid Oz. $219.70

Whip Hoses with OilersPart Number Description List

PriceWH6-1/2OILS Whip Hose 1/2” x 6’ with 1/2” Swivel and Inline Oiler $98.80WH6-3/8OILS Whip Hose 1/2” x 6’ with 3/8” Swivel and Inline Oiler $108.35WH6-7/8OILS Whip Hose 1/2” x 6’ with 7/8” Swivel and Inline Oiler $98.80 WH8-CPOILS Whip Hose 3/4” x 8’ with Universal Fittings and Inline Oiler $149.80

Hydraulic HosesPart Number Description List

PriceHYD6-3/8 Whip Hose 1/2” x 6’ with 3/8” Swivel $90.40HYD6-7/8 Whip Hose 1/2” x 6’ with 7/8” Swivel $85.45

*****NOW AVAILABLE IN HYDRAULIC TOO!!!*****

16

www.tamcotools.com

17

Cleco Style ShankDescription 7” Part

NumberWt. List

Price12” Part Number

Wt. List Price

18” Part Number

Wt. List Price

1-3/8” Std. Wide Scaler 1851-007 0.50 $9.90 1851-012 0.75 $12.45 1851-018 1.25 $15.052” Wide Scaler 1807-007 0.50 $22.85 1807-012 0.75 $26.20 1807-018 1.50 $41.753” Wide Scaler 1842-007 0.50 $27.75 1842-012 1.00 $30.55 1842-018 1.50 $46.153/4” Wide Narrow Scaler 1853-007 0.50 $9.25 1853-012 0.75 $11.60 1853-018 1.25 $14.401-3/8” Wide Spoon Scaler 1854-007 0.50 $9.90 1854-012 0.75 $12.45 1854-018 1.25 $15.05Bull / Moil Point 1811-007 0.50 $11.40 1811-012 0.75 $13.95 1811-018 1.25 $16.70

Ingersoll-Rand Style ShankDescription 7” Part

NumberWt. List


Wt. List Price

18” Part Number

Wt. List Price

1-3/8” Std. Wide Scaler 2051-007 0.50 $9.90 2051-012 0.75 $12.45 2051-018 1.25 $14.702” Wide Scaler 2007-007 0.50 $22.85 2007-012 1.00 $26.20 2007-018 1.50 $41.753” Wide Scaler 2042-007 0.50 $27.75 2042-012 1.00 $30.55 2042-018 1.40 $46.153/4” Wide Narrow Scaler 2053-007 0.75 $9.25 2053-012 0.75 $11.60 2053-018 1.25 $14.401-3/8” Wide Spoon Scaler 2054-007 0.50 $9.90 2054-012 0.75 $12.45 2054-018 1.25 $15.05Bull / Moil Point 2011-007 0.50 $11.40 2011-012 0.75 $13.95 2011-018 1.25 $16.70

Chicago Pneumatic Style ShankDescription 7” Part

NumberWt. List


Wt. List Price

18” Part Number

Wt. List Price

1-3/8” Std. Wide Scaler 2151-007 0.50 $9.90 2151-012 0.75 $12.45 2151-018 1.25 $15.052” Wide Scaler 2107-007 0.50 $22.85 2107-012 1.00 $26.20 2107-018 1.50 $41.753” Wide Scaler 2142-007 0.75 $27.75 2142-012 1.00 $30.55 2142-018 1.50 $46.153/4” Wide Narrow Scaler 2153-007 0.50 $9.25 2153-012 0.75 $11.60 2153-018 1.25 $14.401-3/8” Wide Spoon Scaler 2154-007 0.50 $9.90 2154-012 0.75 $12.45 2154-018 1.25 $15.05

.401 Parker Taper Style ShankDescription 7” Part

NumberList


List Price

18” PartNumber

List Price

24” PartNumber

List Price

Flat 1/2” Wide Chisel 2201-007 $12.50 2201-012 $15.40 2201-018 $25.45 2201-024 $35.40Off set 1/2” Flat Chisel 2202-007 $13.15 2202-012 $16.10 2202-018 $26.20Sidecut 1/2” Chisel 2203-007 $12.50 2203-012 $15.40 2203-018 $25.45Wide Flat 1-1/4” Blade 2205-007 $16.05 2205-012 $18.95 2205-018 $28.95 2205-024 $38.85Bull/Moil Point 2211-007 $12.50 2211-012 $15.40 2211-018 $25.45Flat 3/4” Chisel 2253-007 $12.50 2253-012 $15.40 2253-018 $25.45 2253-024 $35.40

Weld Flux / Scaler Steel


Description Part Number

List Price

Spotweld Breaker 2253-907F $33.70Punch 2262-007 $11.90

www.tamcotools.com

Part Number Description Lgth. Wt. Box Qty. List PriceSDS Max 44-01911T

44-01912T44-01913T44-01914T44-01915T44-01916T44-01917T44-01910T44-01909T

44-0191718T44-0191724T44-0191018T44-0191024T

Chisel 1” BladeChisel 1” Blade

Moil PointMoil Point

Narrow ChiselMoil Point

Scaling Chisel 2” BladeScaling Chisel 3” BladeBushing Tool (16 Teeth)

Scaling Chisel, 2”Scaling Chisel, 2”Scaling Chisel, 3”Scaling Chisel, 3”

12”18”12”18”24”24”12”12”10”18”24”18”24”

1.251.751.251.75

1.251.502.75

25252525

252515

$15.10$19.60$15.10$19.60$26.00$26.00$28.45$31.35$65.30$45.15$64.00$53.75$87.75

Part Number Description Lgth. Wt. Box Qty. List Price1-1/8” Electric

44-02161T44-02163T44-02164T44-02167T44-02169T

Moil PointNarrow ChiselChisel 3” Blade

Asphalt Cutter 5” BladeClay Spade

21-1/2”21-1/2”20-1/2”

20”20”

6.006.006.758.509.75

88858

$29.80$29.80$50.70

$100.80$101.65

Part Number Description Lgth. Wt. Box Qty. List Price

3/4” Hex 44-01517T44-01518T44-01515T44-01516T44-01529T44-01503T44-01520T



Scaling Chisel 2” BladeScaling Chisel 3” Blade

Bushing Tool (1 Pc.)

12”18”12”18”12”12”10”

1.502.251.502.251.752.252.75

25252525252515

$12.95$15.65$12.95$15.65$23.30$33.20$63.30

Part Number Description Lgth. Wt. Box Qty. List PriceSpline Drive 44-01811T

44-01812T44-01813T44-01814T44-01817T44-01819T44-01810T44-01809T44-01822T44-01824T



Scaling Chisel 2” BladeScaling Chisel 2” BladeScaling Chisel 3” Blade

Bushing Tool (1 Pc.)Clay Spade

Ground Rod Driver

12”18”12”18”12”18”12”10”18”12”

1.502.251.502.251.752.502.252.754.503.00

2525252525252555

10

$12.30$14.30$12.30$14.30$23.90$27.50$31.30$65.30$78.45

$102.65

Electric Demo Hammer Steel

1-800-826-2672 P www.tamcotools.com 724-258-6692 FOther model parts are available and in stock. Call for pricing!

18

www.tamcotools.com

Narrow Chisel

Moil Point Shank Size Lgth UC

Wt. Box Qty

List Price

Heavy Duty Moil Points and Narrow Chisels

4001-014H4001-018H

4011-014H4011-018H 7/8” x 3-1/4” 14”

18”3.754.50

$37.40$42.45

4002-014H4002-018H

4012-014H4012-018H 1” x 4-1/4” 14”

18”5.256.25

$34.80$39.40

4003-014H4003-018H

4013-014H4013-018H 1-1/8” x 6” 14”

18”6.758.25

$39.45$45.90

4004-014H4004-018H

4014-014H4014-018H 1-1/4” x 6” 14”

18”8.009.75

$45.90$54.85

Narrow Chisel

Moil Point Shank Size

Lgth UC

Wt. Box Qty

List Price

4001-0144001-0184001-0244001-0364001-0484001-0604001-0724001-0844001-096

4011-0144011-0184011-0244011-0364011-0484011-0604011-0724011-0844011-096

7/8” x 3-1/4”

14”18”24”36”48”60”72”84”96”

3.254.005.257.509.75

12.0014.2516.5018.00

1212

$24.05$26.25$32.40$47.00$61.50$76.05$90.55

$105.10$119.65

4002-0144002-0184002-0244002-0364002-0484002-0604002-0724002-0844002-096

4012-0144012-0184012-0244012-0364012-0484012-0604012-0724012-0844012-096

1” x 4-1/4”

14”18”24”36”48”60”72”84”96”

4.505.506.75

10.0013.0015.7518.7521.7524.50

1210

$25.20$28.90$33.25$49.65$66.10$82.55$99.00

$115.40$131.90

4003-0144003-0184003-0244003-0364003-0484003-0604003-0724003-0844003-096

4013-0144013-0184013-0244013-0364013-0484013-0604013-0724013-0844013-096

1-1/8” x 6”

14”18”24”36”48”60”72”84”96”

6.007.259.50

13.2517.0020.5024.0028.0031.75

87

$28.90$32.30$37.85$58.55$79.20$99.90

$120.55$141.20$161.90

4004-0144004-0184004-0244004-0364004-0484004-0604004-0724004-0844004-096

4014-0144014-0184014-0244014-0364014-0484014-0604014-0724014-0844014-096

1-1/4” x 6”

14”18”24”36”48”60”72”84”96”

7.509.0011.2515.7520.5025.0029.5034.0038.75

87

$33.25$36.25$42.50$72.25

$101.90$131.65$161.35$191.05$220.75

Moil Points

**Longer lengths available**

Paving Breaker Steel


Narrow Chisels

19

www.tamcotools.com

Part Number Shank Size Lth UC Wt. Box Qty

List Price

Heavy Duty 3” Wide Chisels 4021-014H4021-018H 7/8” x 3-1/4” 14”

18”5.006.00

$49.40$53.70

4022-014H4022-018H 1” x 4-1/4” 14”

18”5.256.25

$48.25$54.70

4023-014H4023-018H 1-1/8” x 6” 14”

18”7.008.25

$54.70$60.10

4024-014H4024-018H 1-1/4” x 6” 14”

18”8.50

10.25$60.20$68.60

Part Number Shank Size

Length UC

Wt. Box Qty

List Price

3” Wide Chisels 4021-0144021-0184021-0244021-0364021-0484021-0604021-0724021-096

7/8” x 3-1/4”

14”18”24”36”48”60”72”96”

3.254.005.508.00

10.0012.2514.0018.25

1212

$33.25$36.25$43.45$69.40$95.30

$121.20$147.20$198.90

4022-0144022-0184022-0244022-0364022-0484022-0604022-0724022-0844022-096

1” x 4-1/4”

14”18”24”36”48”60”72”84”96”

4.505.507.50

10.0012.7516.5019.2522.0024.00

1210

$33.90$39.25$46.20$75.95

$105.60$135.35$165.05$194.80$224.45

4023-0144023-0184023-0244023-0364023-0484023-0604023-0724023-0844023-096

1-1/8” x 6”

14”18”24”36”48”60”72”84”96”

6.007.259.75

13.5017.2521.0024.7528.5032.00

87

$37.85$40.55$50.25$84.40

$118.45$152.60$186.75$220.85$255.00

** Longer lengths available **

4024-0144024-0184024-0244024-0364024-0484024-0604024-0724024-0844024-096

1-1/4” x 6”

14”18”24”36”48”60”72”84”96”

7.509.00

12.2516.7521.2526.0030.0035.0039.50

86

$41.65$46.35$55.15$86.25

$138.25$179.80$221.50$263.10$304.60


1-800-826-2672 P www.tamcotools.com 724-258-6692 F20

www.tamcotools.com

Clay Spades Part Number Shank Size Blade Size Wt. List Price4111-0164102-0164103-0164104-016

7/8” x 3-1/4”1” x 4-1/4”1-1/8” x 6”1-1/4” x 6”

5-1/2”

7.007.258.5011.00

$116.10$116.10$123.45$129.90

4102-9164103-9164104-916

1” x 4-1/4”1-1/8” x 6”1-1/4” x 6”

4-1/2”7.008.00

10.50

$118.55$125.85$133.40

Frost Wedges Part Number Shank Size Length UC Wt. List Price

4082-0174084-017

1” x 4-1/4”1-1/4” x 6” 16-1/2” 10.00

18.00$108.30$116.75

Bushing Tools Part Number Shank Size Length UC Wt. List Price2” x 2” Pad 4131-012

4132-0094133-0094134-009

7/8” x 3-1/4”1” x 4-1/4”1-1/8” x 6”1-1/4” x 6”

12”

5.006.507.007.25

$119.70$106.45$109.80$115.00



Combo Cutters Part Number Shank Size Length UC Blade Size Wt. List Price

4063-011.54064-011.5

1-1/8” x 6”1-1/4” x 6”

11-1/2”11-1/2”

3.5”3.5”

8.058.65

$96.40$99.30

Super-Kut Chisels Part Number Shank Size Length UC Wt. List Price

4043-0164044-016

1-1/8” x 6”1-1/4” x 6” 16” 8.00

9.25$62.90$70.75

Concrete Busters Part Number Shank Size Length UC Wt. List Price

4096-0144097-014

1-1/8” x 6”1-1/4” x 6” 14-1/2” 11.25

12.25$122.85$132.30

Asphalt Cutters Part Number Shank Size Blade Size Wt. List Price4061-0124062-0124063-0124064-012

7/8” x 3-1/4”1” x 4-1/4”1-1/8” x 6”1-1/4” x 6”

5” x 6”7.007.258.5011.00

$83.80$92.55$85.95$88.10

Asphalt Wedge 4063-8134064-813

1-1/8” x 6”1-1/4” x 6” 3” x 7” 10.00

12.00$93.70

$101.00

21

www.tamcotools.com

Detachable Shanks Part Number Shank Size Description Wt. List Price

44-00307S44-00308S44-00309S44-00310S

7/8” x 3-1/4”1” x 4-1/4”1-1/8” x 6”1-1/4” x 6”

Shank9” Under Collar

3.754.505.256.00

$68.65$65.85$69.55$74.70

44-00308L44-00309L44-00310L

1” x 4-1/4”1-1/8” x 6”1-1/4” x 6”

Large Taper Shank

9” Under Collar

4.505.256.00

$66.35$70.55$75.60

Tamping Pads Part Number Description Wt. List Price(Pads Only)**Use Large Taper Detachable Shanks** 44-01352

44-0136044-01362

7” Round Pad6” Square Pad8” Square Pad

11.7510.0014.50

$84.90$84.90

$105.85

Sign Post Driver Part Number Description Wt. List Price(Heads Only)

**Use Small Taper Detachable Shanks**

44-01910

44-01911

3-1/2” ID Driver Only

Post Block Insert Only

14.25

4.00

$120.65

$67.60

Ground Rod Drivers Part Number Shank Size Rod Size Hole Dia. Wt. List Price4162-6094162-7094162-8094162-909

1” x 4-1/4”

5/8”3/4”7/8”1”

11/16”13/16”

1”1-1/8”

5.25$83.25$83.25$93.90

$102.90

4163-6094163-7094163-8094163-909

1-1/8” x 6”

5/8”3/4”7/8”1”

11/16”13/16”

1”1-1/8”

6.75

$87.95$87.95$98.40

$108.45

4164-6094164-7094164-8094164-909

1-1/4” x 6”

5/8”3/4”7/8”1”

11/16”13/16”

1”1-1/8”

7.25

$94.60$94.60

$105.30$119.70

Paving Breaker Accessories


www.tamcotools.com

Flat Chisels Length Weight RSOR HSOR RSRR HSRR Box Qty List Price9”

12”18”24”36”48”60”72”84”96”

1.251.752.503.005.256.009.009.25

12.5014.50

1401-0091401-0121401-0181401-0241401-0361401-0481401-0601401-0721401-0841401-096

1501-0091501-0121501-0181501-0241501-0361501-0481501-0601501-0721501-0841501-096

1601-0091601-0121601-0181601-0241601-0361601-0481601-0601601-0721601-0841601-096

1701-0091701-0121701-0181701-0241701-0361701-0481701-0601701-0721701-0841701-096

25252015

$13.20$15.50$20.25$25.00$34.80$44.65$54.45$64.30$74.15$84.05

Bull / Moil Points Length Weight RSOR HSOR RSRR HSRR Box Qty List Price9”

12”18”24”36”48”60”72”84”96”

1.251.752.503.505.257.009.2511.0012.5014.50

1411-0091411-0121411-0181411-0241411-0361411-0481411-0601411-0721411-0841411-096

1511-0091511-0121511-0181511-0241511-0361511-0481511-0601511-0721511-0841511-096

1611-0091611-0121611-0181611-0241611-0361611-0481611-0601611-0721611-0841611-096

1711-0091711-0121711-0181711-0241711-0361711-0481711-0601711-0721711-0841711-096

25252015

$13.20$15.50$20.25$25.00$34.80$44.70$54.45$64.30$74.15$84.05

2” Wide Flat Blade Length Weight RSOR HSOR RSRR HSRR Box Qty List Price9”

12”18”24”36”48”60”72”84”96”

1.251.752.503.505.257.009.2511.0012.5014.50

1407-0091407-0121407-0181407-0241407-0361407-0481407-0601407-0721407-0841407-096

1507-0091507-0121507-0181507-0241507-0361507-0481507-0601507-0721507-0841507-096

1607-0091607-0121607-0181607-0241607-0361607-0481607-0601607-0721607-0841607-096

1707-0091707-0121707-0181707-0241707-0361707-0481707-0601707-0721707-0841707-096

25252015

$17.50$19.70$23.50$28.15$39.00$49.90$60.70$71.60$82.50$93.40

3” Wide Flat Blade Lgth Weight RSOR HSOR RSRR HSRR Box Qty List Price

12” 2.00 1442-012 1542-012 1642-012 1742-012 15 $41.00

** Longer lengths are available for narrow chisels, moil points, and 2” wide fl at blades **

RSOR HSOR RSRR HSRR

Chipping Hammer Steel


(Round Shank / Oval Retainer) (Hex Shank / Oval Retainer) (Round Shank / Round Retainer) (Hex Shank / Round Retainer)

23

www.tamcotools.com

Length Weight RSOR HSOR RSRR HSRR Box Qty List PriceBushing Tools 9”

2.50 1482-009 1582-009 1682-009 1782-009 10 $63.00

Length Weight RSOR HSOR RSRR HSRR Box Qty List Price1-1/2” Wide Flat Blade 9”

12”18”

N/A1406-0091406-0121406-018

1506-0091506-0121506-018

1606-0091606-0121606-018

1706-0091706-0121706-018

N/A$15.70$18.05$21.95

Chipping Hammer Steel


Length Weight RSOR HSOR Box Qty List PriceGround Rod Drivers3/4” Rod size

12”

3.75 1492-012.75 1592-012.75 N/A $98.65

Rivet Buster SteelFlat Chisels Length Jumbo

BusterWt. List

PriceSmall Buster

Wt. List Price

Box Qty

10”12”18”24”36”48”

3301-010C3301-012C3301-018C3301-0243301-0363301-048

2.252.503.75

$20.05$24.40$33.00$44.75$63.85$83.00

3201-009C3201-012C3201-018C3201-0243201-0363201-048

1.502.253.00

$17.25$21.55$31.75$43.40$60.90$77.90

252515

Bull / Moil Points Length Jumbo Buster

Wt. List Price

Small Buster

Wt. List Price

Box Qty

10”12”18”24”36”48”

3311-010C3311-012C3311-018C3311-024C3311-036C3311-048C

2.252.503.75

$20.05$24.40$33.00$44.75$63.85$83.00

3211-009C3211-012C3211-018C3211-024C3211-036C

N/A

1.502.253.00

$17.25$21.55$31.75$43.40$60.90N/A

252515

Radius Blade Length Jumbo Buster“Duck Bill”

Wt. List Price

1-1/8” X 10”1-1/8” X 10”

3301-810 3301-810SPEC

1.852.00

$21.30$25.45

24

www.tamcotools.com

8” Lg Backout Punch Rivet Size

JumboBuster

Wt. List Price

SmallBuster

Wt. List Price

Box Qty

5/8”3/4”7/8”

3376-0143377-0143378-014

2.002.252.50

$36.10$36.10$36.10

3276-0143277-0143278-014

1.752.002.50

$31.85$31.85$31.85

252525


Jumbo Buster

Wt. List Price

SmallBuster

Wt. List Price

Box Qty

5/8”3/4”7/8”

3373-0123374-0123375-012

1.752.002.25

$34.25$34.25$34.25

3273-0123274-0123275-012

1.501.752.00

$29.55$29.55$29.55

252525


Jumbo Buster

Wt. List Price

SmallBuster

Wt. List Price

Box Qty

5/8”3/4”7/8”

3370-0103371-0103372-010

1.752.002.25

$32.60$32.60$32.60

3270-0103271-0103272-010

1.501.501.75

$27.90$27.90$27.90

252525

Std. Backout Punch Rivet Size

JumboBuster

Wt. List Price

Small Buster

Wt. List Price

Box Qty

3/8”1/2”5/8”3/4”7/8”1”

3360-0093361-0093362-0093363-0093364-0093365-009

-1.501.501.751.752.00

$25.10$25.10$25.10$25.10$25.10$25.10

3260-0093261-0093262-0093263-0093264-009

N/A

-1.251.501.501.50-

$21.65$21.65$21.65$21.65$21.65

N/A

252525252525

Ripper Chisels Length JumboBuster

Wt. List Price

SmallBuster

Wt. List Price

Box Qty

9”12”

3358-0093358-012

2.002.25

$31.85$35.75

3258-0093258-012

1.502.25

$28.65$31.20

2525

Rivet Buster Steel


3” Wide Rivet Buster Chisel Length Item Number Wt. List Price

Box Qty

12”18”

3342-012 3342-018

3.004.25

$43.00$68.25

15-

Drift Pin Tool Length Item Number Wt. List Price Box Qty

8” 3398-008 1.75 $30.85 25

2” Wide Rivet Buster Chisel Length Item Number Wt. List Price Box Qty

12”18”

3307-012 3307-018

2.503.75

$32.75$43.40

20-

** Please note that the 2” Wide and 3” Wide Chisel styles require a split sleeve - Item T33210300S. **

25

www.tamcotools.com

7/8” x 3-1/4” Shank H-ThreadLength U.C. Part Number Wt. List Price

12”18”24”30”36”48”60”72”96”

120”

H7312H7318H7324H7330H7336H7348H7360H7372H7396

H73120

3.004.005.006.007.009.0011.0014.0018.0022.00

$63.20$68.60$74.10$80.10$86.10$97.65

$109.20$120.80$148.70$176.65

7/8” x 4-1/4” Shank H-ThreadLength U.C. Part Number Wt. List Price

12”18”24”30”36”48”60”72”

H7412H7418H7424H7430H7436H7448H7460H7472

3.254.255.256.257.259.25

12.0013.25

$64.40$69.85$75.25$81.25$87.30$98.85

$110.40$122.00

1” x 4-1/4” Shank H-ThreadLength U.C. Part Number Wt. List Price

12”18”24”30”36”48”60”72”96”

120”

H1412H1418H1424H1430H1436H1448H1460H1472H1496

H14120

4.005.007.009.00

10.0012.0015.0018.0023.0028.00

$68.10$74.30$80.60$87.45$94.30

$106.60$118.85$131.15$161.55$191.85

H-Thread ExtentionsLength U.C. Part Number Wt. List Price

24”36”48”72”96”

H24XH36XH48XH72XH96X

7.0010.0012.0018.0023.00

$80.60$94.30

$106.60$131.15$161.55

Couplings and AdaptorsDescription Part Number Wt. List Price

CouplingH to D Adaptor

HCPLH-DCPL

0.500.75

$30.10$44.55

7/8” x 3-1/4” Shank E-ThreadLength U.C. Part Number Wt. List Price

12”18”24”30”36”48”60”72”

E7312E7318E7324E7330E7336E7348

N/AN/A

2.753.003.505.005.758.00

$93.60$99.00

$104.40$110.40$116.50$128.05

N/AN/A

1” x 4-1/4” Shank D-ThreadLength U.C. Part Number Wt. List Price

12”18”24”30”36”48”60”72”

D1412D1418D1424

N/AD1436D1448

N/AD1472

4.255.506.50

-9.2511.00

-15.00

$89.70$95.95

$102.20N/A

$115.95$128.25

N/A$152.85

Detachable Bit Hollow Drill Steel


1” x 4-1/4” 1” Rope ThreadLength U.C. Part Number List Price

18” RT1001418 $160.5524” RT1001424 $185.2030” RT1001430 $194.6536” RT1001436 $204.0548” RT1001448 $225.7560” RT1001460 $247.95

11 Degree Tapered Steel, 7/8” x 3-1/4”Length U.C. Part Number List Price

12” DS7312-11 $76.5018” DS7318-11 $78.1524” DS7324-11 $87.4030” DS7330-11 $91.9036” DS7336-11 $100.2042” DS7342-11 $107.1048” DS7348-11 $148.6560” DS7360-11 $167.85

***Also available in 7/8” x 4-1/4” and 1”***

26

www.tamcotools.com

27

Bit Diam.

Bit Diam.

Part Number

Wt. Carbide Height

Carbide List Price

Inch MM (MM) Width (MM)

1-3/8” 35 HTI-137H 0.50 14 8 $48.151-1/2” 38 HTI-150H 0.60 14 8 $50.951-5/8” 41 HTI-162H 0.65 14 8 $61.251-3/4” 45 HTI-175H 0.80 14 8 $66.851-7/8” 48 HTI-187H 0.90 14 8 $73.70

2” 51 HTI-200H 1.10 14 8 $79.852-1/4” 57 HTI-225H 1.20 14 8 $89.602-1/2” 64 HTI-250H 1.30 14 9.5 $121.102-3/4” 70 HTI-275H 1.55 20 12 $157.15

3” 76 HTI-300H 3.00 23 12 $163.903-1/2” 89 HTI-350H 3.00 16 12 $275.65

4” 101 HTI-400H 3.65 16 12 $353.05

All Steel Threaded Rock BitsInch MM Part # Wt. List

PriceE-Thread

15/16” 24 SRB0937E 0.12 $15.951” 25 SRB100E 0.12 $16.05

1-1/8” 29 SRB112E 0.14 $16.251-1/4” 32 SRB125E 0.16 $16.25

H - Thread1-3/8” 35 SRB137H 0.44 $13.251-1/2” 38 SRB150H 0.46 $13.501-5/8” 41 SRB162H 0.56 $10.801-3/4” 45 SRB175H 0.60 $14.951-7/8” 48 SRB187H 0.82 $16.25

2” 51 SRB200H 0.88 $16.752-1/4” 57 SRB225H 1.16 $17.302-1/2” 64 SRB250H 1.30 $22.252-5/8” 67 SRB262H 1.34 $23.50

D - Thread3-1/2” 89 SRB350D 2.90 $43.75

4” 102 SRB400D 3.30 $73.00

Threaded Rock Bits


Multi-Use Threaded Carbide Rock Bits

Thread Type Dimension A Dimension B Dimension C Threads/InchDEH

1.180”0.623”0.998”

1-3/4”7/8”

1-3/8”

0.868”0.500”0.711”

566

We off er a line of Ballistic Button Bitsand Rope Threaded Bits.

Please call us for information and pricing!

Rebar Cutter BitsH-Thread

Rope Threaded Bits and More!

Bit Diam.

Part Number

List Price

1-3/8” HTI-137HRB $94.951-1/2” HTI-150HRB $102.551-5/8” HTI-162HRB $113.051-3/4” HTI-175HRB $120.001-7/8” HTI-187HRB $130.10

2” HTI-200HRB $145.452-1/4” HTI-225HRB $150.052-1/2” HTI-250HRB $192.75

Bit Diam.

Part Number

List Price

1-1/8” HTI-112-11M $63.701-1/4” HTI-125-11M $57.801-3/8” HTI-137-11M $61.45

11 Degree Tapered Bits

www.tamcotools.com

Hexagon Shank

Whirlibit - Speed Drills


Bit Diameter

Drill Depth

Lgth U.C.

7/8” x 3-1/4” Wt. List Price

7/8” x 4-1/4” Wt. List Price

1” x 4-1/4” Wt. List Price

5/8”

6”9”

15”21”27”

9”12”18”24”30”

WB7309625WB7312625WB7318625WB7324625WB7330625

1.501.752.002.503.00

$118.55$127.25$147.25$159.20$184.70

WB7409625WB7412625WB7418625WB7424625WB7430625

1.752.002.252.753.25

$119.80$128.50$148.45$160.45$185.90

3/4”

6”9”

15”21”27”33”45”

9”12”18”24”30”36”48”

WB7309750WB7312750WB7318750WB7324750WB7330750WB7336750WB7348750

1.752.002.503.003.503.754.25

$107.55$113.85$124.35$125.50$128.45$144.50$176.55

WB7409750WB7412750WB7418750WB7424750WB7430750WB7436750WB7448750

2.002.252.753.253.754.004.50

$108.75$115.05$125.55$126.70$129.70$145.70$177.80

WB1412750WB1418750WB1424750WB1430750

2.503.003.504.00

$127.45$136.55$138.10$142.20

7/8”

6”9”

15”21”27”33”45”

9”12”18”24”30”36”48”

WB7309875WB7312875WB7318875WB7324875WB7330875WB7336875WB7348875

2.002.503.003.754.505.006.25

$107.70$109.35$120.60$125.65$129.30$144.90$177.55

WB7409875WB7412875WB7418875WB7424875WB7430875WB7436875WB7448875

2.252.753.254.004.755.256.50

$108.85$110.50$121.90$126.85$130.50$146.20$178.70

WB1412875WB1418875WB1424875WB1430875WB1436875

2.503.254.004.505.50

$130.85$132.70$134.75$140.75$221.45

1”

9”15”21”27”33”45”

12”18”24”30”36”48”

WB7312100WB7318100WB7324100WB7330100WB7336100WB7348100

2.753.504.255.256.007.50

$116.90$122.20$123.50$133.25$148.80$181.30

WB7412100WB7418100WB7424100WB7430100WB7436100WB7448100

3.003.754.505.506.257.75

$118.15$123.45$124.70$134.40$150.00$182.55

WB1412100WB1418100WB1424100WB1430100WB1436100

3.004.005.005.756.25

$143.65$145.10$151.15$159.85$194.05

1-1/8”

9”15”21”27”33”45”

12”18”24”30”36”48”

WB7312112WB7318112WB7324112WB7330112WB7336112WB7348112

3.004.005.006.006.758.75

$118.60$121.95$125.85$129.30$144.40$178.65

WB7412112WB7418112WB7424112WB7430112WB7436112WB7448112

3.254.255.256.257.009.00

$119.85$123.10$127.05$130.50$145.55$179.90

WB1412112WB1418112WB1424112WB1430112WB1436112WB1448112

3.754.505.506.757.7510.0

$146.75$149.45$156.45$168.35$197.40$292.95

1-3/16” 15”21”

18”24”

WB7318118WB7330118

4.005.00

$163.15$171.70

WB7418118WB7424118

4.505.25

$164.40$168.20

1-1/4”

9”15”21”27”33”45”

12”18”24”30”36”48”

WB7312125WB7318125WB7324125WB7330125WB7336125WB7348125

3.004.005.006.007.008.75

$125.85$129.30$132.90$136.25$153.60$186.05

WB7412125WB7418125WB7424125WB7430125WB7436125WB7448125

3.254.255.256.257.259.00

$127.05$130.50$134.05$137.50$154.80$187.25

WB1412125WB1418125WB1424125WB1430125WB1436125WB1448125

4.255.506.758.007.5011.5

$151.15$152.95$156.45$170.30$201.90$297.70

1-3/8”

9”15”21”27”45”

12”18”24”30”48”

WB7312137WB7318137WB7324137WB7330137WB7348137

3.254.005.256.257.50

$121.95$126.85$128.45$130.20$177.85

WB7412137WB7418137WB7424137WB7430137WB7448137

3.504.255.506.509.25

$123.10$128.05$129.70$131.45$178.95

WB1412137WB1418137WB1424137WB1430137

4.255.506.508.00

$146.00$152.85$159.85$166.25

1-1/2”

9”15”21”27”45”

12”18”24”30”48”

WB7312150WB7318150WB7324150WB7330150WB7348150

3.254.255.256.259.00

$140.40$145.75$151.15$156.60$204.15

WB7412150WB7418150WB7424150WB7430150WB7448150

3.504.505.506.509.00

$141.60$146.95$152.40$157.75$205.35

WB1412150WB1418150WB1424150WB1430150

4.005.506.758.00

$151.15$155.55$162.55$165.95

1-5/8”9”

15”21”27”

12”18”24”30”

WB7312162WB7318162WB7324162WB7330162

3.004.005.506.50

$180.10$189.35$198.70$208.05

WB7418162WB7424162

4.255.75

$190.50$199.85 WB1424162 7.00 $201.65

28

www.tamcotools.com

Part Number

Bit Dia.

Drill Depth

Overall Lgth.

Wt. List Price

44-0184044-0184144-0185544-0185644-0184244-0184344-01843144-0184444-0184544-01845844-01846

1/2”1/2”

9/16”9/16”5/8”5/8”5/8”3/4”3/4”3/4”7/8”

8”12”8”

12”8”

12”18”8”

12”18”8”

13”16”13”16”13”16”22”13”16”22”13”

0.751.000.751.001.001.252.001.251.502.001.50

$130.30$140.10$130.30$140.10$130.30$140.10$180.45$130.30$140.10$180.45$111.75

Part Number

Bit Dia.

Drill Depth

Overall Lgth.

Wt. List Price

44-0184744-01847144-0184844-0184944-01849144-0185044-0185144-0185244-0185344-0185744-01858

7/8”7/8”1”1”1”

1-1/8”1-1/8”1-1/4”1-1/4”1-1/2”1-3/4”

12”18”8”

12”18”8”

12”8”

12”12”12”

16”22-1/2”

13”16”

22-1/2”13”16”13”16”16”16”

1.752.251.752.252.751.752.252.002.752.753.00

$124.70$166.50$114.30$127.15$137.75$116.90$123.60$127.15$144.40$145.25$157.50

Part Number

Bit Dia.

Drill Depth

Overall Lgth.

Wt. List Price

WB908313WB908375WB908438WB908469WB908500WB910500WB908563WB912563WB908625WB912625WB918625WB908750WB912750WB918750WB908875WB912875WB918875WB908100WB912100

5/16”3/8”

7/16”15/32”

1/2”1/2”

9/16”9/16”5/8”5/8”5/8”3/4”3/4”3/4”7/8”7/8”7/8”1”1”

8” Solid8” Solid8” Solid8” Solid

8”10-1/2”

8”12”8”

12”18”8”

12”18”8”

12”18”8”

12”

13”13”13”13”13”16”13”17”13”17”23”13”17”23”13”17”23”13”17”

0.750.751.001.000.751.001.001.001.001.251.751.251.502.001.752.253.001.752.50

$90.20$91.20$92.05$92.70

$105.40$117.85$106.20$117.75$106.60$118.00$137.05$107.90$120.45$138.40$109.25$121.75$139.15$111.55$124.20

Part Number

Bit Dia.

Drill Depth

Overall Lgth.

Wt. List Price

WB918100WB923100WB908112WB912112WB918112WB908125WB912125WB918125WB908137WB912137WB918137WB908150WB912150WB918150WB908162WB912162WB918162WB908175WB912175

1”1”

1-1/8”1-1/8”1-1/8”1-1/4”1-1/4”1-1/4”1-3/8”1-3/8”1-3/8”1-1/2”1-1/2”1-1/2”1-5/8”1-5/8”1-5/8”1-3/4”1-3/4”

18”23”8”

12”18”8”

12”18”8”

12”18”8”

12”18”8”

12”18”8”

12”

23”28”13”17”23”13”17”23”13”17”23”13”17”23”13”17”23”13”17”

3.504.502.002.753.752.252.754.002.253.004.002.253.004.002.503.004.002.503.25

$143.35$195.95$114.15$126.80$143.75$124.20$136.95$146.40$126.75$139.25$156.45$137.05$149.55$159.50$139.25$152.10$193.30$141.85$154.45

C9 Shank Carbide Tipped Hollow Drills (3/4” Round Slotted)

U7 Shank Carbide Tipped Hollow Drills (9/16” x 1-3/4” Hex Shank)

Carbide Tipped Hollow Drills


Seize-Free Carbide Drill BitsPart Number Bit Dia. Drill Depth Shank Size Lgth UC Wt. List PriceTHB7308822THB7308827THB7308840THB7408822THB1408822THB1408827

7/8”7/8”7/8”7/8”7/8”7/8”

19”24”37”19”19”24”

7/8” x 3-1/4”7/8” x 3-1/4”7/8” x 3-1/4”7/8” x 4-1/4”1” x 4-1/4”1” x 4-1/4”

22”27”40”22”22”27”

3.253.755.253.503.754.25

$198.15$245.05$351.70$199.50$330.35$377.25

Tamco’s patented Seize-Free carbide drill bit combines a unique, spiral fl uted design with increased air fl ow to the carbide tip. This prevents drill binding, the most common problem encountered when drilling through

pavement overlays such as asphalt, concrete and stone.

29

www.tamcotools.com


Stone Splitting Wedges and ShimsHole Size Length Wedge Part Number List Price Shim Part Number List Price

3/8”1/2”5/8”3/4”7/8”1”

1-1/4”1-3/8” to 1-5/8”1-3/8” to 1-5/8”1-3/8” to 1-5/8”1-3/8” o 1-5/8”1-3/8” to 1-5/8”

2-1/2”2-5/8”2-3/4”

4”5”6”8”

12”18”24”36”48”

45-0159445-0156645-0072745-0073145-0157045-0074045-0156845-0157145-0157245-0157345-0157545-01577

$4.35$4.35$3.50$4.35$5.80

$10.50$17.40$20.90$41.75$52.10$78.10

$104.20

45-0159745-0159745-0073545-0073945-0158245-0074145-0156945-0158345-0158445-0158545-0158745-01589

$2.20$2.20$1.80$2.65$2.95$3.50$7.00

$10.50$20.90$26.10$39.05$52.10

**All wedges and shims are sold by the individual piece.**

Alloy WedgesPart Number H W L Wt. List Price

6601-0046602-0066611-0046612-0046621-0066622-0076623-0086631-0086632-0066641-0076642-0066643-0126651-0076661-0086662-0126663-0126671-0106681-0086682-0126683-012

1/4”1/4”3/8”3/8”1/2”1/2”1/2”5/8”5/8”3/4”3/4”3/4”7/8”1”1”1”

1-1/2”2”2”2”

1/2”1/2”3/4”1”

3/4”1”

1-1/2”1-1/4”

2”3/4”1”1”1”1”

1-1/2”3”2”2”2”3”

4”6”4”4”6”7”8”8”6”7”6”

12”7”8”

12”12”10”8”

12”12”

0.250.250.250.250.500.501.001.001.250.500.751.751.001.252.755.005.004.506.75

12.75

$13.15$14.25$15.30$15.35$18.75$19.15$22.85$24.00$26.45$21.05$21.05$28.50$27.45$25.25$58.65$72.10$78.50$73.60

$113.35$117.65

Carbon Right Angle WedgesPart Number H W L Wt. List Price6881-003C6882-006C6883-008C6884-008C6885-008C6886-010C6887-012C6888-012C

1/4”1/2”3/4”1”

1-1/4”1-1/2”1-3/4”

2”

3/4”1”

1-1/2”1-1/2”1-1/4”1-1/2”1-3/4”

2”

3”6”8”8”8”10”12”12”

0.250.501.001.502.003.005.007.00

$6.40$7.30

$11.50$12.85$15.10$19.80$26.00$36.15

Hand Tools

www.tamcotools.com

31

Alloy Banana WedgePart Number Height Width Length Wt. List Price6696-013UNB6696-813UNB

(With 3/16” Dia. Hole)

13/16”13/16

13/16”13/16

13”13”

1.251.25

$11.45$18.75

Alloy Barrel Drift PinsPart

NumberPin Dia.

Rivet Size

End Center OAL Wt. List Price

6531-0066532-0066533-0076534-0076535-0086536-0086537-0096538-009

7/16”9/16”11/16”13/16”15/16”1-1/16”1-3/16”1-5/16”

3/8”1/2”5/8”3/4”7/8”1”

1-1/8”1-1/4”

1-3/4”2”

2-1/4”2-1/4”2-1/2”2-3/4”

3”3-1/8”

2-1/2”2-1/2”2-1/2”

3”3”3”3”

3-1/4”

6”6-1/2”

7”7-1/2”

8”8-1/2”

9”9-1/2”

0.250.250.500.751.001.502.002.75

$7.25$7.25$7.45$7.95$8.85

$12.45$16.40$17.65

Carbon Barrel Drift PinsPart

NumberPin Dia.

Rivet Size

End Center OAL Wt. List Price

6534-008C6535-008C6536-008C6537-008C

13/16”15/16”1-1/16”1-3/16”

3/4”7/8”1”

1-1/8”

2-1/2”2-1/2”2-1/2”2-1/2”

3”3”3”3”

8”8”8”8”

0.751.001.501.75

$7.25$7.55$9.20

$14.20

Sheeters ChiselPart Number Style Blade

WidthBody Stock

Length List Price

5952-008 Std. 1-3/4” 5/8” 8” $10.60

5907-008 Heavy Duty 2” 3/4” 8” $12.60

Flat ChiselPart Number Body Stock Length List Price

5401-0083/4”

8” $13.505401-010 10” $14.555401-012 12” $15.555501-008

7/8”8” $14.10

5501-010 10” $14.805501-012 12” $15.505601-008

1”8” $16.15

5601-012 12” $17.75

Hand Tools


Flange WedgePart Number Height Width Length Wt. List Price

6650-011FLNG 7/8” 7/8” 11” 1.25 $10.10

www.tamcotools.com

Pinch Bars

Part Number Stk. Size OAL List Price7001-0187001-024 1/2” 18”

24”$14.90$18.80

7002-0187002-024 5/8” 18”

24”$16.40$21.20

7003-0187003-0247003-0367003-048

3/4”

18”24”36”48”

$17.75$24.00$30.70$39.55

7004-0367004-0487004-060

7/8”36”48”60”

$35.10$46.40$58.70

7005-0367005-0487005-0607005-072

1”

36”48”60”72”

$44.75$60.45$76.30$92.20

Lining Bars

Part Number Stk. Size OAL List Price7202-036 5/8” 36” $30.257203-0247203-036 3/4” 24”

36”$24.00$30.70

7204-0247204-060 7/8” 24”

60”$24.10$58.70

7205-0487205-0607205-072

1”48”60”72”

$60.45$76.30$92.20

Nickle Chrome Plated Pinch Bars

Part Number Stk. Size OAL List Price7004-030NCP 7/8” 30” $48.90

Needle Bars

Part Number Stk. Size OAL List Price7503-060 3/4” 60” $49.657504-0487504-060 7/8” 48”

60”$45.35$57.50

7505-0607505-072 1” 60”

72”$80.40$94.75

Gooseneck Bars

Part Number Stk. Size OAL List Price7603-036 3/4” 36” $30.707605-0487605-072 1” 48”

72”$60.45$92.20

Chisel Bars

Part Number Stk. Size OAL List Price7404-0367404-0607404-072

7/8”36”60”72”

$31.00$51.80$62.50

7405-060 1” 60” $71.30

Maintenance Bars


www.tamcotools.com

Manufacturing and Corporate Offi ce:

1466 Delberts DriveMonongahela, PA 15063

(800)826-2672 / (724)258-6622(724) 258-6692 Fax


Stocking Warehouses:• Hayward, CA• Riverside, CA


price manual number 2020-01

Documents