price quote for: aftermarket tractor/skidsteer attachments ......seq. #416-1216 minnesota pricing...

SEQ. #416-1216 MINNESOTA PRICING PAGES(Typed Responses Required)

December 2016

Aftermarket Tractor/Skidsteer Attachments

Price quote for: Aftermarket Tractor/Skidsteer Attachments

Vendor Name:Contact Person:Street Address:

P.O. Box:City, State, Zip

Phone #:Toll Free #:

Fax #:Email Address:

1.0 Manufacturer's Name:

Attachment Description: Snow blowers

Warranty Term (months, years):

Percent Discount (%) to be applied to Price List:

Date & I.D. of the Price List:

2.0 Delivery Charges:(SEE SPECIAL TERMS AND CONDITIONS)

DELIVERY STARTING POINT (City)(State & Zip Code)

Price Per Loaded Mile

Minimum Delivery Charge

3.0 Price for additional Service Manual:

Price for additional Parts Manual:

4.0 Installation Services - Per Hour (Shop Labor Rate) $99 Installation services may be requested on an "as needed" basis.(See Special Terms and Conditons)

$0

$0

888-448-5266763-422-3949

5%

US Price List 2016-2017

NO FLAT RATE ALLOWED

$0.50

St. Pascal

12 months

Quebec CA G0L 3YO

$600

Lano Equipment AnokaScott Fahey6140 Hwy 10 NW

Normand

[email protected]

Anoka, MN 55303612-223-0510

mailto:[email protected]

i

SNOWBLOWERS AND

Salt/Sand Spreaders

US PRICE LIST 2016–2017 Effective April 1st, 2016

©Normand Co. Ltd 2016 All right reserved

ii

TABLE OF CONTENTS $US PRICES LIST 2016-2017

Effective April 1st, 2016

Page

New 2016 - 2017 ............................................................................................................................... v

General informations ......................................................................................................................... 1

Assembly fees, warranty .................................................................................................................... 2

Information on lifetime of P.T.O ......................................................................................................... 3

EX series Prices ............................................................................................................................... 4

ECONOR® snowblowers Prices ....................................................................................................... 6

ECONOR® snowblowers Specifications .......................................................................................... 8

Conversion kits for ECONOR® snowblowers for Skid Steer ............................................................. 10

N54-240H @ N86-260HTR NORMAND snowblowers Prices ......................................................... 12

N54-240H @ N86-260HTR NORMAND snowblowers Specifications ........................................... 14

N86-280H @ N92-280HDTR, N98-280H NORMAND snowblowers Prices ..................................... 15

N86-280H @ N92-280HDTR, N98-280H NORMAND snowblowers Specifications ....................... 17

N92-310H @ N98-312HTR NORMAND snowblowers Prices ......................................................... 18

N98-340H @ N112-342HTR NORMAND snowblowers Prices........................................................ 21

N92-310H @ N98-312HTR, N98-340H @ N112-342HTR NORMAND snowblowers Spécifications ...................... 24

HE+ Series Normand snowblowers with Essa+ scraper blades ....................................................... 25

N50-262, N60-262H NORMAND snowblowers for sidewalks Prices ........................................... 31

N50-262, N60-262H NORMAND snowblowers for sidewalks Specifications ............................. 33

N74-250HINV, N82-260HINV N92-280HINV, N102-310HINV NORMAND Pull type models Prices ...................... 34

N74-250HINV, N82-260HINV N92-280HINV, N102-310HINV NORMAND Pull type models Specifications......... 37

N99-342HTRSI, N100-342TRI @ N120-402TRI NORMAND Industrial models Prices .................... 38

N99-342HTRSI, N100-342TRI @ N120-402TRI NORMAND Industrial models Specifications ....... 43

3

TABLE OF CONTENTS (suite) $US PRICES LIST 2016-2017

Effective April 1st, 2016 Rising & Reducer boxes, Accelerator boxes .................................................................................... 44

Transfert boxes (for front mounted snowblowers) ............................................................................ 46

SCR-54, SCR-72, SCR-86, SCR-92 & SCR-98 Self loading salt & sand spreaders ........................ 48

S3P-46, S3P-56 Salt & sand spreaders on 3-points hitch ................................................................ 50

Chutes (weights, lengths, etc.) ......................................................................................................... 52

4

GENERAL INFORMATIONS Description used to name different types of

NORMAND & ECONOR snowblowers

N E 112 – 34 2 C H TR S I INV

2016

Identifies an inverted type (pull type) snowblower Identifies an industrial snowblower with many components in Hardox 450

Identifies an semi industrial snowblower with many components in Hardox 450

Identifies a snowblower with a rotary drum

Identifies a snowblower with many components in Hardox 450 Identifies a snowblower for compact tractor series

Identifies the number of augers Possibilities 0 one auger with low profile

1 one auger with the possibility to add a second auger on top 2 two augers

Identifies the diameter of the impeller (inches) Possibilities : 20, 22, 24, 25, 26, 28, 31, 34, 36 & 40 inches

Identifies the cutting width of the snowblower (inches) Possibilities : 48, 50, 54, 60, 66, 68, 72, 74, 78, 80, 82, 86, 92, 94, 98, 100, 102, 110, 112…120

Identifies the snowblowers of ECONOR series Identifies the snowblowers of NORMAND series

1

Effective April 1st, 2016 Normand Co. Ltd 418 492-2712

2016 $US

FEES FOR ASSEMBLY OF SNOWBLOWERS - NO DISCOUNT ON ASSEMBLY

-included complete greasing of the unit -included testing of hydraulic mechanisms when buying hydraulic hoses

Description of assemblies Models Net prices

Econor assembly & greasing (chute, 3-pts pins, rotation. If ordered: skid shoes, cylinder and hoses)

AS-ECONOR $187

N54-240H @ N86-260HTR assembly & greasing (chute, 3-pts attachment, rotation. If ordered : cylinder & hoses)

AS-N240-260 $230

N86-280H @ N92-280HDTR, N98-280H assembly & greasing (gear for chute, chute, 3-pts attachment, rotation. If ordered : cylinder, hydraulic motor for rotative drum & hoses)

AS-N280

$243

N92-310H@ N112-342HTR assembly & greasing (gear for chute, chute, 3-pts attachment, rotation. If ordered : cylinder, hydraulic motor for rotative drum & hoses)

AS-N310-342

$273

Industrial assembly & greasing (chute if transportation allows, If ordered : hoses) AS-IND $276

ECONOR/NORMAND Pull type assembly & greasing (gear for chute, chute, 3-pts pins, rotation. If ordered : cylinder, rear blade & hoses)

AS-NINV

$202

The prices for assemby included only labor Prices shown in section «Fees for assembly of snowblowers» are NET prices

No discount applicable on them.

Warranty Every product manufactured by Normand Co. Ltd is guaranteed against manufacturing and raw material

defects (excluding the P.T.O. shafts, gearboxes, engines, hydraulic motors, hydraulic cylinders, telescopic cylinders, tires, hubs and wheels, which are covered by the manufacturer warranty) for a full year from the date of purchase, provided that the product has not been modified or abused in any way.

This warranty does not cover accidents or breaks caused by objects other than snow (metal bits, concrete, wood, asphalt, tires, etc.). Also blades, skid shoes, soles of skid shoes, driving chains and tires

wear is not covered by the warranty. We will replace or repair any defective part at no cost if they are returned prepaid at our plant in Saint-Pascal (Kamouraska, Québec, Canada). Our obligations are limited

to the replacement and/or repair of the defective part.

Effective April 1st, 2016 Normand Co. Ltd

2 418 492-2712

2016 $US

IMPORTANT NOTICE

The lifetime of the driving shaft and its components such as forks, seals and tubes depends on several factors that cannot be controlled by Normand Company. The following issues directly affect the lifetime of the drive shaft:

• Too big tractors (an excessive P.T.O. angle) • The P.T.O. joints • The angle on each end of the P.T.O must be equal. • The shear bolts (use only the original bolts) • The frequency of lubrication and the type of grease used (good quality grease, industrial-type) • Maximum length of the P.T.O.

In the event that one or more of the above mentioned situations applies, we suggest you as an option the following solutions.

• To increase the distance from the tractor to the snowblower would reduce the angle at the joints. • A bigger driving shaft (for an intensive use when the tractor is at the top of the recommended power would

extend the lifetime of the shaft when the operating angle is moderate. • A driving shaft with multilobe tubes (would facilitate the sliding of the tubes) • The installation of a raiser and reducer gearbox 1000 rpm to 540 rpm on the snowblower would reduce the

angle and mechanical stress of the P.T.O. on the tractor.

TO AVOID ACCEPTABLE

TOO BIG ANGLE AT THE P.T.O. JOINTS REASONABLE ANGLE AT THE P.T.O. JOINTS

TO AVOID RECOMMENDED

NON EQUALS ANGLES AT THE P.T.O. JOINTS EQUAL ANGLES AT THE P.T.O. JOINTS


3 418 492-2712

2016 $US

EX SERIES SNOWBLOWERS

MODELS EX52 EX62 EX72 Recommended horsepower (HP PTO) 16 @ 40* 18 @ 40* 20 @ 40* Basic price (including chute, gap rod for deflector, P.T.O. & hardware)

$2 121

$2 170

$2 304

Manual chute rotation 49-6800 $161

49-6800 $161

49-6800 $161

Chute rotation by hydraulic motor (including hydraulic motor)

49-6910 $449

49-6910 $449

49-6910 $449

Hydraulic cylinder (2’’ x 4’’) (with flow reducer))

EN14-1013 $115

EN14-1013 $115

EN14-1013 $115

Kit of 2 lateral skid shoes (including hardware)

EN-PATLAT08 $115

EN-PATLAT08 $115

EN-PATLAT08 $115

∗ Use with a T40 PTO shaft if more than 30HP PTO Blades & skid shoes wear not covered by the warranty

Supplement for PTO shaft

Supplement for T40 PTO in replacment of T20 PTO shaft SPTO T40/T20 $67

Special colors (ordered before fabrication) Surfacer epoxy, urethane painting (black, blue, green, orange, yellow ind.) EX52 @ EX72 $118

No cancellation of special color will be accepted.

4


♦ Prices are based on a minimum of 10 units per model ♦ Available on booking only

2016 $US

ECONOR

SNOWBLOWERS

5


ECONOR SNOWBLOWERS

2016 $US

E48-200 E54-220 E60-220 E66-220 E72-240 E78-240 E86-280 E94-280 E100-310 E68-220INV E80-260INV

Kit EN-E48-200 EN-E54-220 EN-E60-220 EN-E66-220 EN-E72-240 EN-E78-240 EN-E86-280 EN-E94-280 EN-E100-310 EN-E68-220INV EN-E80-260INV

Recommended horsepower (HP PTO) 16@40* 16@40* 18@40* 25@40 25@40 35@65** 50@80 50@80 75@120 25@40 40@75

Basic price (including chute, gap rod for deflector, P.T.O. & hardware)

$2 551

$2 670

$2 788

$2 899

$3 275

$3 708

$4 495

$4 690

$5 938

$4 286

$5 795

Manual chute rotation EN-ROTM01 $156

EN-ROTM01 $156

EN-ROTM01 $156

EN-ROTM01 $156

EN-ROTM01 $156

EN-ROTM01 $156

EN-ROTM02 165$

EN-ROTM02 $165

– EN-ROTM03

$165

–

Chute rotation by hydraulic cylinder 2” x 4” (non included)

EN-ROTC01 $237

EN-ROTC01 $237

EN-ROTC01 $237

EN-ROTC01 $237

EN-ROTC01 $237

EN-ROTC01 $237

EN-ROTC02 $254

EN-ROTC02 $254

–

–

–

Hydraulic cylinder (2’’ x 4’’) (with flow reducer))

EN14-1013 $115

EN14-1013 $115

EN14-1013 $115

EN14-1013 $115

EN14-1013 $115

EN14-1013 $115

EN14-1013 $115

EN14-1013 $115

– EN14-1013

$115

–

Hydraulic cylinder (2.5’’ x 8’’)

–

–

–

–

–

–

–

– 14-1011 $128 – 14-1011

$128

Chute rotation by including hydraulic motor)

EN-ROTE01 $449

EN-ROTE01 $449

EN-ROTE01 $449

EN-ROTE01 $449

EN-ROTE01 $449

EN-ROTE01 $449

EN-ROTE02 $454

EN-ROTE02 $454

EN-ROTE11 $454

EN-ROTE01 $449

EN-ROTE12 $454

Kit of 2 skid shoes (including hardware)

EN-PATLAT08 $91

EN-PATLAT08 $91

EN-PATLAT08 $91

EN-PATLAT08 $91

EN-PATLAT08 $91

EN-PATLAT08 $91

EN-PATLAT09 $112

EN-PATLAT09 $112

EN-PATLAT09 $112

EN-PATLAT08 $91

EN-PAT02 $132

Chain accelerator 1 :1.28 540 RPM @ 693 RPM

06-2300 $561

06-2300 $561

06-2300 $561

06-2300 $561

06-2300 $561

06-2302 $561

–

–

–

–

–

Chain rising box 1 :1 540 RPM @ 540 RPM

–

–

–

–

–

– 06-2303

$928 06-2303

$928

–

–

–

Rear scraper with carbon steel blade with chain

–

–

–

–

–

–

–

–

– 49-5804

$978 49-5803

$978

Rear scraper with Tivar blade with chain

–

–

–

–

–

–

–

–

– 49-5805

$1 134 49-5802 $1 282

Semi industrial chute (extra charge)

S49-3789 $381

S49-3789 $381

S49-3789 $381

S49-3789 $381

S49-3789 $381

S49-3789 $381

S49-0798 $524

S49-0798 $524 – – Included

Hydraulic cylinder for semi industrial chute

EN14-1013 $115

EN14-1013 $115

EN14-1013 $115

EN14-1013 $115

EN14-1013 $115

EN14-1013 $115

14-1011 $128

14-1011 $128 - - 14-1011

$128 Chain guard with hardware (black – installation non included – 2 holes to drill)

EN-GC01 $51

EN-GC01 $51

EN-GC01 $51

EN-GC01 $51

EN-GC01 $51

EN-GC01 $51

EN-GC01 $51

EN-GC01 $51

EN-GC01 $51

EN-GC01 $51

Included

Hoses kit with connectors (not inst.) for chute rotation only

14-2100-35 $131

14-2100-35 $131

14-2100-35 $131

14-2100-35 $131

14-2100-35 $131

14-2100-35 $131

14-2100-36 $131

14-2100-36 $131

14-2100-36 $131

14-2100-36 $131

14-2100-36 $131

Hoses kit with connectors (not inst.) for chute rotation & hydraulic cylinder

14-2100-26 $259

14-2100-26 $259

14-2100-26 $259

14-2100-26 $259

14-2100-26 $259

14-2100-26 $259

14-2100-28 $259

14-2100-28 $259

14-2100-28 $259

14-2100-25 $254

14-2100-12 $323

Use with a P.T.O. shaft T40 if more than 30 HP ** Use with a P.T.O. shaft T60 if more than 40 HP

6


2016 $US

ECONOR SNOWBLOWERS (suite)

TO ADD TO THE BASIC PRICES Supplement for PTO T40 in replacement of PTO T20 SPTO T40/T20 $67 Supplement for PTO T60 in replacement of PTO T40 SPTO T60/T40 $128

SPECIAL COLORS (ordered before fabrication) E48 @ E78 E80, E86, E94 & E100

Surfacer epoxy, urethane painting (black, blue, green, orange, yellow ind.)

$125

$141

NB : No cancellation of special color will be accepted.

Blades & skid shoes wear not covered by the warranty

For fees for assembly, see page 2

7


2016 $US

1 auger (LP)

ECONOR® E48-200 E54-220 E60-220 E66-220 E72-240 E78-240 E86-280 E94-280 E100-310 E68-220INV E80-260INV

Recommended horsepower (HP PTO) 16 @ 40* 16 @ 40* 18 @ 40* 25 @ 40 25 @ 40 35 @ 65** 50 @ 80 50 @ 80 75 @ 120 25 @ 40 40 @ 75

Cutting width 48’’ 54’’ 60’’ 66’’ 72’’ 78’’ 86’’ 94’’ 100’’ 68’’ 80’’

Cutting height 26’’ 28’’ 28’’ 28’’ 29 ½’’ 29 ½’’ 36’’ 36’’ 38 ½’’ 26 ¼’’ 33 ‘’

Impeller RPM 540 540 540 540 540 540 540 540 540 540 540

Impeller diameter 20’’ 22’’ 22’’ 22’’ 24’’ 24’’ 28’’ 28’’ 31’’ 22’’ 26’’

Impeller shaft diameter 1 ¼’’ 1 ¼’’ 1 ¼’’ 1 ¼’’ 1 ¼’’ 1 9/16’’ 1 9/16’’ 1 9/16’’ 2’’ 1 ¼’’ 1 9/16’’

Impeller depth 7’’ 7’’ 8’’ 8’’ 8 ½’’ 8 ½’’ 11’’ 11’’ 12’’ 8’’ 11’’

Impeller center height 13 ½’’ 14 ½’’ 14 ½’’ 14 ½’’ 15 ½’’ 15 ½’’ 18 ¾’’ 18 ¾’’ 20’’ 14 ½’’ 17’’

Balanced impeller Std Std Std Std Std Std Std Std Std Std Std

Number of blades 4 4 4 4 4 4 4 4 5 4 4

Main auger diameter 17’’ 17’’ 17’’ 17’’ 17’’ 17’’ 20’’ 20’’ 23’’ 15’’ 20’’

Balanced auger Std Std Std Std Std Std Std Std Std Std Std

Chute rotation on Polyethylène

Manual Opt. Opt. Opt. Opt Opt. Opt. Opt. Opt. - Opt. -

Hydraulic cylinder Opt. Opt. Opt. Opt Opt. Opt. Opt. Opt. - - -

Hydraulic motor (gear) Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt.

Chute 1 or 2 deflectors 1 1 1 1 1 1 1 1 1 1 2

Manual deflector Std Std Std Std Std Std Std Std Std Std Std

Hydraulic deflector Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt.

Reversible carbon steel blade Std Std Std Std Std Std Std Std Std. Std Std

Adjustable skid shoes Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt.

Storage foot Std Std Std Std Std Std Std Std Std. - Std

P.T.O shaft number T20 T20 T20 T40 T40 T40 T60 T60 T80 T40 long T60 long

Driving chain number 50 50 60 60 60 60 60 60 80 60 60

Number of safety bolts 2 2 2 2 2 2 2 2 3 2 2

Hitch category (QA = quick hitch) 1 1 1 1 1 1 2 2 2 1, QA 2

Approx. weight (lb) 420 lb 470 lb 506 lb 525 lb 570 lb 640 lb 967 lb 992 lb 1 480 lb 595 lb 1 055 lb

* Use with a P.T.O. shaft T40 if more than 30 HP ** Use with a P.T.O. shaft T60 if more than 40 HP The weight does not include chute and accessories. Specifications are subject to change without notice

8


CONVERSION KIT

FOR ECONOR® SNOWBLOWERS

for Skid Steer

Effective April 1st, 2016 Normand Co. Ltd 418 492-2712 Effective April 1st, 2016 Normand Co. Ltd 418 492-2712

9

THE ABOVE PRICES OF CONVERSION KIT INCLUDE

• Hydraulic distribution block controlling the rotation of the impeller and auger, chute rotation and action of deflector

• Chute rotation by gear (including hydraulic motor) (EN-ROTE01) • Hydraulic motor for the rotation of the shaft of the fan ; • Hydraulic cylinder (1) for chute deflector (EN14-1013) • Hoses connecting the distribution block to the motors (2) and the cylinder • Attachment adaptor for « skid steer »

ARE NOT INCLUDED Hoses between skid steer and hydraulic distribution block

CONVERSION KIT

FOR ECONOR® SNOWBLOWERS for Skid Steer

PART #

DESCRIPTION

OIL VOLUME

REQUIRED GPM

MOTOR POWER (HP equivalent) at 2,750 LBS PRESSURE

BASIC PRICES*

49-3610-01 Conversion kit 100S for E60-220 15@18 = 18@23 HP $3 762

49-3610-02 Conversion kit 125S for E60-220 18@23 = 23@26 HP $3 899

49-3610-03 Conversion kit 160S for E60-220, E66-220 & E72-240 23@25 = 28@32 HP $3 901

49-3610-04 Conversion kit 160T for E60-220, E66-220 & E72-240 23@28 = 28@36 HP $4 253

49-3610-05 Conversion kit 200T for E60-220, E66-220 & E72-240 28@35 = 36@45 HP $4 272

49-3610-06 Conversion kit 160T for E78-240 23@28 = 28@36 HP $4 315

49-3610-07 Conversion kit 200T for E78-240 28@35 = 36@45 HP $4 410

* Do not forget to add the price of the snowblower to the basic prices of the conversion kit. Prices for ECONOR snowblowers are available on page 6

ESSENTIAL ACCESSORIES TO ADD THE BASIC PRICES PART # PRICE

ECONOR snowblowers E60-220 @ E78-240 See page 6 Dual trigger swith control (with connectors, without wire) 14-8601-01 $353 Dual trigger swith control + electric wire (20’ long) 14-8601-02 $730


10

NORMAND SNOWBLOWERS


11

40 @ 65 HP

REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES CHUTE SELECTION FOR MODELS N54-240H @ N74-250H PART # PRICE Semi industrial with 1 flat deflector & 1 rounded deflector 29-3789 $648

CHUTE SELECTION FOR MODELS N74-260H & N86-260HTR PART # PRICE Semi industrial with 1 flat deflector & 1 rounded deflector 29-3799 $685

OPTION FOR CHUTE PART # PRICE Anti fog removable front panel for chute 29-3789 29-3789-60 $89 Anti fog removable front panel for chute 29-3799 29-3799-60 $89

CHUTE DEFLECTOR CONTROL* PART # PRICE Telescopic gap rod 29-4850 $93 For chute 29-3789 Hydraulic cylinder 2" x 4" including flow reducer* EN14-1013 $115 For chute 29-3799 Hydraulic cylinder 2" x 6" including flow reducer* EN14-1016 $125

*Limited warranty of the chute if not included

CHUTE ROTATION PART # PRICE Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve EN-ROTE14 $514

DRUM ROTATION FOR MODELS N82-260HTR & N86-260HTR PART # PRICE Hydraulic motor with chrome shaft and valve 14-8205-25 Included

P.T.O. shaft (1 3/8 – 6 splines snowblower side)

P.T.O. MODELS 1 3/8 – 6 splines – tractor side PART # PRICE (suppl.)

T20 For N54-240H & N60-240H 06-0006 Included T40 In replacement of T20 P.T.O. shaft (supplement) SPTO-T40/T20 $67 T40 For N68-250H @ N74-250H 06-0010 Included T60 For N74-260H, N82-260H @ N86-260HTR 06-0015 Included

• Carbon steel skid shoes and reversible blade are included. • P.T.O. included. • Hoses holder kit (EN-SUP02) is included. • Hydraulic motor with chrome shaft and valve for rotary drum included.

CHUTE NOT INCLUDED

MODELS & BASE PRICES 20 @ 40 HP* 40 @ 65 HP 40 @ 65 HP

N54-240H N60-240H N68-250H N74-250H N74-260H N82-260H N86-260H $3 959 $4 081 $4 795 $4 874 $5 231 $5 229 $5 751

N82-260HTR N86-260HTR $6 565 $6 961


12 418 492-2712

SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.

SKID SHOES & BLADES KITS Hardness level of material 1 being the hardest & 3 the softness. PART # PRICE (suppl.)

Carbon steel (2)

All blades & skid shoes installed on all snowblowers are made with carbon steel.

–

Included

Stainless steel (2)

N54-240H SCPI-54H $369 N60-240H SCPI-60H $381 N68-250H SCPI-68H $390 N74-250H, N74-260H SCPI-74H $388 N82-260H & N82-260HTR SCPI-82H $410 N86-260H & N86-260HTR SCPI-86-260H $434

Hardox 450 (1)

N54-240H SCPH-54H $196 N60-240H SCPH-60H $203 N68-250H SCPH-68H $205 N74-250H, N74-260H SCPH-74H $211 N82-260H & N82-260HTR SCPH-82H $205 N86-260H & N86-260HTR SCPH-86-260H $227

Tivar (3)

N68-250H SCPT-68H $734 N74-250H, N74-260H SCPT-74H $720 N82-260H & N82-260HTR SCPT-82H $719 N86-260H & N86-260HTR SCPT-86-260H $722


FIXED LATERAL BLADES N54-240h @ N86-260HTR PART # PRICE For N54-220 @ N82-260HTR Set of fixed lateral blades (left & right) (40” heigth, 3” width) 29-4314 $278

HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For N54-240H @ N82-260H, for 2 hydraulic functions 14-2100-03 $269 For N82-260HTR & N86-260HTR, for 3 hydraulics functions 14-2100-04 $352


SPECIAL COLORS (ordered before fabrication) MODELS PRICE Surfacer epoxy, urethane painting (black, blue, green, orange, yellow ind.) N54-240H @ N86-260HTR $141

NB : No cancellation of special color will be accepted. For all models of boxes reducer or accelerator, specifications & prices, see pages 44 @ 46


13 418 492-2712

2016 $US

1auger only (LP)

NORMAND N54-240H N60-240H N68-250H N74-250H N74-260H N82-260H

N82-260HTR N86-260H

N86-260HTR Recommended horsepower (HP PTO) 20 @ 40* 20 @ 40* 25 @ 45 25 @ 45 40 @ 65 40 @ 65 45 @ 75

Cutting width 54" 60" 68" 74" 74" 82" 86" Cutting height 28 ½" 28 ½" 29 ½" 29 ½" 32 ½" 32 ½" 32 ½" Impeller RPM 540 540 540 540 540 540 540 Impeller diameter 24" 24" 25" 25" 26" 26" 26" Impeller depth 7 ½" 7 ½" 9" 9" 11" 11" 11" Number of blades 4 4 4 4 4 4 4 Impeller shaft diameter 1 ¼" 1 ¼" 1 9/16" 1 9/16" 1 9/16" 1 9/16" 1 9/16" Balanced impeller Std Std Std Std Std Std Std Drum center height 14" 14" 14 ½'' 14 ½'' 15 ½'' 15 ½'' 15 ½" Removable rotary drum - - - - - - / Std - / Std Cylinder for chute (deflector) 2" X 4" 2" X 4" 2" X 4" 2" X 4" 2" X 6" 2" X 6" 2" X 6" Chute rotation by hydraulic motor (gear with Std Std Std Std Std Std Std Manual deflector Std Std Std Std Std Std Std Hydraulic deflector Opt. Opt. Opt. Opt. Opt. Opt. Opt. Semi industrial chute (2 deflectors) Std Std Std Std Std Std Std Hydraulic telescopic chute - - - - - - Opt. Hoses holder Std Std Std Std Std Std Std Main auger diameter 17" 17" 17" 17" 19 ½" 19 ½" 19 ½" Upper auger diameter - - - - - - - Balanced auger Std Std Std Std Std Std Std Revesible carbon steel blade Std Std Std Std Std Std Std Reversible Hardox 450 blade Opt. Opt. Opt. Opt. Opt. Opt. Opt. Reversible stainless steel blade Opt. Opt. Opt. Opt. Opt. Opt. Opt. Tivar blade Opt. Opt. Opt. Opt. Opt. Opt. Opt. Lateral blades Opt. Opt. Opt. Opt. Opt. Opt. Opt. Adjustable carbon steel skid shoes Std Std Std Std Std Std Std Adjustable Hardox 450 skid shoes Opt. Opt. Opt. Opt. Opt. Opt. Opt. Adjustable stainless steel skid shoes Opt. Opt. Opt. Opt. Opt. Opt. Opt. Adjustable Tivar skid shoes Opt. Opt. Opt. Opt. Opt. Opt. Opt. Driving chain number 60 60 60 60 60 60 60 Storage foot Std Std Std Std Std Std Std Number of safety bolts 2 2 2 2 2 2 2 Bearing ductile iron casing Std Std Std Std Std Std Std Shaft P.T.O. standard T20 T20 T40 T40 T60 T60 T60 1 000 @ 540 reducer box - - - - - - - Adjustable hitch Std Std Std Std Std Std Std Hitch category (QH = quick hitch) 1, QH 1, QH 1, QH 1, QH 1, 1QH, 2 1, 1 QH, 2 1, 1 QH, 2

Approx. weight (lb) - 1 auger 515 lb 555 lb 675 lb 710 lb 906 lb 950 lb 1 060 lb

996 lb 1 105 lb

* Use with a P.T.O. shaft T40 if more than 30 HP The weight does not include chute and accessories. Specifications are subject to change without notice

14


MODELS & BASE PRICES 60 @ 85 HP 60 @ 85 HP 60 @ 85 HP 60 @ 85HP 75 @ 120 HP 75 @ 120 HP

N86-280H N86-281H N86-282H N92-280H N92-280HD N98-280H $5 954 $6 534 $7 257 $6 144 $7 194 $7 565

N86-280HTR N86-281HTR N86-282HTR N92-280HDTR $7 363 $7 891 $8 714 $8 605

REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES CHUTE SELECTION FOR MODELS N86-280H @ N92-280HDTR

& N98-280H PART # PRICE

Semi industrial Semi industrial with 1 flat deflector & 1 rounded deflector 29-0798 $810 Hydraulic telescopic (mounted cylinder included) 29-0670 $3 090

OPTION FOR CHUTE 29-0798 PART # PRICE Anti fog removable front panel 29-0798-60 $89

CHUTE DEFLECTOR CONTROL PART # PRICE Telescopic gap rod 29-0850 $93 Hydraulic cylinder (2 1/2"x 8")* 14-1011 $128

*Limited warranty of the chute if not included. CHUTE ROTATION PART # PRICE

For N86-280H @ N92-280HDTR & N98-280H Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve

EN-ROTE15

$540

For telescopic chute 29-0670 Chute rotation kit including motor holder & hydraulic motor with chrome shaft and valve

EN-ROTE13

$540

DRUM ROTATION FOR MODELS N86-280HTR @ N92-280HDTR PART # PRICE Hydraulic motor with chrome shaft and valve 14-8206-25 Included

NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.

CHOICE OF P.T.O. shaft

P.T.O. MODELS (1 3/8 – 6 splines snowblower side) PART # PRICE (suppl.) 1 3/8 – 6 splines tractor side

T60 / N86-280H @ N92-280HTR 06-0015 Included T80 / assembly like a T60 (bigger) SPTO-T80/T60 $234 P.T.O. MODELS (1 ¾ - 20 splines snowblower side) 1 3/8 – 6 splines tractor side T80 / N92-280HD, N92-280HDTR, N98-280H 06-0001 Included

• Carbon steel skid shoes and reversible blade are included. • P.T.O. is included. • Hoses holder kit (EN-SUP02) is included. • Hydraulic motor with chrome shaft and valve for rotary drum included.

CHUTE NOT INCLUDED


15 418 492-2712

SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES SKID SHOES & BLADES KITS

Hardness level of material 1 being the hardest & 3 the softness. PART # PRICE (suppl.) Carbon steel (2)


–

Included

Stainless steel (2)

N86-280H @ N86-282HTR SCPI-86H $604 N92-280H, N92-280HD, N92-280HDTR SCPI-92H $621 N98-280H SCPI-98H $627

Hardox 450

(1)

N86-280H @ N86-282HTR SCPH-86H $245 N92-280H, N92-280HD, N92-280HDTR SCPH-92H $249 N98-280H SCPH-98H $253

Tivar 88

(3)

N86-280H @ N86-282HTR SCPT-86H $690 N92-280H, N92-280HD, N92-280HDTR SCPT-92H $718 N98-280H SCPT-98H $714


FIXED LATERAL BLADES FOR N86-280H @ N98-280H PART # PRICE

For N86-280H @ N86-280HTR & N92-280H, N92-280HD, N92-280HDTR, N98-280H Set of fixed lateral blades (left & right) (46'' height, 4'' width)

29-0327

$287

For N86-281H @ N86-282HTR Set of fixed lateral blades (left & right) (55 ½'' height, 4'' width)

29-1318

$310

HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For N86-280H @ N92-280H, with semi industrial chute, 2 hydraulic functions 14-2100-07 $278 For N92-280HD & N98-280H with semi industrial chute, 2 hydraulic functions 14-2100-01 $284 For N86-280HTR @ N86-282HTR with semi industrial chute, 3 hydraulic functions 14-2100-06 $360 For N92-280HDTR with semi industrial chute, 3 hydraulic functions 14-2100-02 $365 For N86-280H @ N92-280H, N98-280H with telescopic chute, 3 hydraulic functions 14-2100-30 $427 For N86-280HTR @ N86-282HTR with telescopic chute, 4 hydraulic functions 14-2100-31 $500 For N92-280HDTR with telescopic chute, 4 hydraulic functions 14-2100-32 $500

For fees for assembly, see page 2.

SPECIAL COLORS (ordered before fabrication MODELS PRICE


N86-280H @ N92-280HDTR, N98-280H

$165


REDUCER BOXES (recommended for tractor of 100 HP PTO and more

PART #

PRICE

For N86-280H @ N92-280HDTR, N98-280H Box reducer with 3 gears (175HP) 1000@540RPM & reducer/reverser (225HP) 1 ¾ - 20 splines, including mounting kit

SBR-200-280

$2 883

For all models of boxes reducer or accelerator, specifications & prices, see pages see pages 44 @ 46.


16 418 492-2712

2016 $US

1 auger only (LP)

1 or 2 augers

1 auger only (LP)

NORMAND N86-280H N86-280HTR

N86-282H N86-282HTR

N92-280H N92-280HD

N92-280HDTR

N98-280H

Recommended horsepower (HP PTO) 60@85 60@85 60@85 75@120 75@120

Cutting width 86" 86" 92'' 92'' 98" Cutting height 36" 41" 36'' 36'' 36'' Impeller RPM 540 540 540 540 540 Impeller diameter 28 ½" 28 ½" 28 ½’’ 28 ½'' 28 ½" Impeller depth 12'' 12'' 12'' 12'' 12'' Number of blades 4 4 4 4 4 Impeller shaft diameter 1 9/16" 1 9/16" 1 9/16" 2'' 2" Balanced impeller Std Std Std Std Std Drum center height 17 ¾'' 17 ¾'' 17 ¾'' 17 ¾’’' 17 ¾'' Removable rotary drum - / Std - / Std - - / Std - Cylinder for chute (deflector) 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" Chute rotation by hydraulic motor (gear with Std Std Std Std Std Manual deflector Std Std Std Std Std Hydraulic deflector Opt. Opt. Opt. Opt. Opt. Semi industrial chute (2 deflectors) Std Std Std Std Std Hydraulic telescopic chute Opt. Opt. Opt. Opt. Opt. Hoses holder Std Std Std Std Std Main auger diameter 23" 23" 23'' 23" 23" Upper auger diameter - 13" - - - Balanced auger Std Std Std Std Std Revesible carbon steel blade Std Std Std Std Std Reversible Hardox 450 blade Opt. Opt. Opt. Opt. Opt. Reversible stainless steel blade Opt. Opt. Opt. Opt. Opt. Tivar blade Opt. Opt. Opt. Opt. Opt. Lateral blades Opt. Opt. Opt. Opt. Opt. Adjustable carbon steel skid shoes Std Std Std Std Std Adjustable Hardox 450 skid shoes Opt. Opt. Opt. Opt. Opt. Adjustable stainless steel skid shoes Opt. Opt. Opt. Opt. Opt. Adjustable Tivar skid shoes Opt. Opt. Opt. Opt. Opt. Storage foot 80 80 80 Std Std Driving chain number Std Std Std 80 80 Number of safety bolts 2 2 2 3 3 Bearing ductile iron casing Std Std Std Std Std Shaft P.T.O. standard T60 T60 T60 T80 T80 1 000 @ 540 reducer box Opt. Opt. Opt. Opt. Opt. Adjustable hitch Std Std Std Std Std Hitch category (QH = quick hitch) 2, QH 2, QH 2, QH 2, QH 2, QH

Approx. weight (lb) - 1 auger 1 387 lb 1 522 lb

1 461 lb 1 596 lb 1 414 lb 1 630 lb

1 669 lb 1 669 lb

The weight does not include chute and accessories. Specifications are subject to change without notice

17


MODELS & BASE PRICES

85 @ 140 HP N92-310H N92-311H N92-312H N98-310H N98-311H N98-312H

$8 376 $8 696 $9 660 $8 853 $8 981 $9 942 N92-311HTR N92-312HTR N98-310HTR N98-311HTR N98-312HTR $10 477 $11 627 $9 993 $10 399 $11 759

CHUTE SELECTION FOR MODELS N92-310H @ N98-312HTR PART # PRICE Semi industrial with 1 flat deflector & 1 rounded deflector 29-1792 $986 Hydraulic telescopic (mounted cylinder included & 2 anti fog removable front panels) EN-CHU-I05 $3 336

OPTION FOR CHUTE PART # PRICE Anti fog removable front panel for chute 29-1792 29-1792-60 $89

CHUTE DEFLECTOR CONTROL* PART # PRICE Telescopic gap rod 29-0850 $93 Hydraulic cylinder (2 1/2"x 8")* 14-1011 $128


CHUTE ROTATION PART # PRICE

For N92-310H @ N98-312HTR Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve

EN-ROTE16

$540

For telescopic chute EN-CHUI-05 Chute rotation kit including motor holder & hydraulic motor with chrome shaft and valve

EN-ROTE17

$540

DRUM ROTATION FOR MODELS WITH ROTARY DRUM PART # PRICE Hydraulic motor with chrome shaft and valve 14-8206-25 Included

(with

REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES

• Carbon steel skid shoes and reversible blade are included. • P.T.O. T80 included. • Hoses holder kit (EN-SUP02) is included. • Hydraulic motor with chrome shaft and valve for rotary drum included

CHUTE NOT INCLUDED

REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES (suite) P.T.O. SHAFT (1 ¾ - 20 splines snowblower side)

1 3/8 - 6 splines – tractor side 1 3/8 - P.T.O. MODELS (without reducer box)

PART # PRICE (suppl.) PART # PRICE (suppl.) T80 06-0 001 Included SPTO -T80RED $164 V80 (multilobes) SPTO-V80 $374 SPTO -V80RED $374 T90 (bigger) SPTO-T90 $566 SPTO -T90RED $566 V90 (bigger & multilobes) SPTO-V90 $677 SPTO -V90RED $677


18 418 492-2712

SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES FULL FLIGHT AUGER replacement for main auger PART # PRICE (suppl.) For N92-310H @ N92-312HTR Full flight auger (each) SVP-92 $1 300 For N98-310H @ N98-312HTR Full flight auger SVP-98 $1 401

Hardox 450 TEETH on full flight auger PART # PRICE (suppl.) For N98-310H @ N98-312HTR on full flight auger (For one auger) SDH-003 $588

SKID SHOES & BLADES KITS

Hardness level of material 1 being the hardest & 3 the softness. PART # PRICE (suppl.)

Carbon steel (2)

All blades & skid shoes installed on all snowblowers are made with carbon steel..

–

Included

Stainless steel (2) N92-310H @ N92-312HTR SCPI-92H $621 N98-310H @ N98-312HTR SCPI-98H $627

Hardox 450 (1) N92-310H @ N92-312HTR SCPH-92H $249

N98-310H @ N98-312HTR SCPH-98H $253

Tivar 88 (3) N92-310H @ N92-312HTR SCPT-92H $719 N98-310H @ N98-312HTR SCPT-98H $714

LATERAL BLADES PART # PRICE

For N92-310H & N98-310H Set of fixed lateral blades (left & right) (46'' height, 4'' width)

29-0327

$287

For N92-311H @ N92-312HTR, N98-311H @ N98-312HTR Set of fixed lateral blades (left & right) (55 ½'' height, 4'' width)

29-1318

$310

For N92-311H @ N92-312HTR, N98-311H @ N98-312HTR Set of hydraulic lateral blades + cylinder (1)

70-0500

$2 609



19 418 492-2712

SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES (suite) HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For N92-310H, N92-312H, N98-310H, N98-312H, with semi industrial chute, 2 hydraulic functions 14-2100-01 $284

For N92-311HTR, N92-312HTR, N98-311HTR, N98-312HTR with semi industrial chute, 3 hydraulic functions 14-2100-02 $365

For N92-310H, N92-312H, N98-310H, N98-312H with telescopic chute, 3 hydraulic functions 14-2100-30 $427

For N92-311HTR, N92-312HTR, N98-311HTR, N98-312HTR with telescopic chute, 4 hydraulic functions 14-2100-32 $500




N92-310H @ N98-312HTR

$188

NB : No cancellation of special color will be accepted

REDUCER BOXES (recommended for tractor of 100 HP PTO and more)

PART #

PRICE

For N92-310H to N98-312HTR Box reducer with 3 gears (175HP) 1000@540RPM & reducer/reverser (225HP) 1 ¾ - 20 splines, including mounting kit

SBR-200

$2 883

For all models of boxes reducer or accelerator, specifications & prices, see pages 44 @ 46


20 418 492-2712

MODELS & BASE PRICES 100 @ 160 HP 100 @ 160 HP 100 @ 160 HP

N98-340H N102-340H $9 275 $9 426

N98-341H N102-341H N112-341H $9 575 $9 671 $10 574

N98-341HTR N102-341HTR N112-341HTR $11 232 $10 936 $11 897

N98-342H N102-342H N112-342H $10 527 $10 725 $11 428

N98-342HTR N102-342HTR N112-342HTR $12 185 $11 989 $12 848

REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES CHUTE SELECTION for models N98-310H @ N112-342HTR PART # PRICE Semi industrial with 1 flat deflector & 1 rounded deflector 29-1792 $986 Hydraulic telescopic (mounted cylinder included & 2 anti fog removable front panels) EN-CHU-I05 $3 336





For N98-340H @ N112-342HTR Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve

EN-ROTE16

$540

For telescopic chute EN-CHUI-05 Chute rotation kit including motor holder & hydraulic motor with chrome shaft and valve

EN-ROTE17

$540

DRUM ROTATION FOR MODELS WITH ROTARY DRUM PART # PRICE Hydraulic motor with chrome shaft and valve 14-8206-25 Included

• Carbon steel skid shoes and reversible blade are included. • P.T.O. T80 included. • Hoses holder kit (EN-SUP02) is included. • Hydraulic motor with chrome shaft and valve for rotary drum included.

CHUTE NOT INCLUDED


21 418 492-2712

side

SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES FULL FLIGHT AUGER replacement for main auger PART # PRICE (suppl.) For N98-340H @ N98-342HTR Full flight auger SVP-98 $1 401 For N102-340H @ N102-342HTR Full flight auger SVP-102 $1 427 For N112-341H @ N112-342HTR Full flight auger SVP-112 $1 535

Hardox 450 TEETH on full flight auger PART # PRICE (suppl.) For N98-340H @ N112-342HTR on full flight auger (For one auger) SDH-003 $588




-

Included

Stainless steel (2) N98-340H @ N98-342HTR SCPI-98-342H $631 N102-340H @ N102-342HTR SCPI-102H $639

Hardox 450

(1)

N98-340H @ N98-342HTR SCPH-98-342H $255 N102-340H @ N102-342HTR SCPH-102H $244 N112-341H @ N112-342HTR SCPH-112H $244

Tivar 88 (3) N98-340H @ N98-342HTR SCPT-98-342H $714 N102-340H @ N102-342HTR SCPT-102H $744

LATERAL BLADES PART # PRICE

For N98-340H & N102-340H Set of fixed lateral blades (left & right) (46'' height, 4'' width)

29-0327 $287

For N98-341H @ N112-342HTR Set of fixed lateral blades (left & right) (55 ½'' height, 4'' width)

29-1318

$310

For N98-342H & N98-342HTR Set of hydraulic lateral blades + cylinder (1) 70-0500 $2 609 For N102-342H to N112-342HTR Set of hydraulic lateral blades + cylinder (1) 70-0500 $2 609

Blades & skid shoes wear not covered by the warranty.

REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES (suite) NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.

P.T.O. SHAFT (1 ¾ - 20 splines snowblower side) 1 3/8 - 6 splines – tractor side 1 3/8 - 21 splines – tractor

P.T.O. MODELS (without reducer box) (with reducer box)

PART # PRICE (suppl.) PART # PRICE (suppl.) T80 06-0 001 Included SPTO -T80RED $164 V80 (multilobes) SPTO-V80 $374 SPTO -V80RED $374 T90 (bigger) SPTO-T90 $566 SPTO -T90RED $566 V90 (bigger & multilobes) SPTO-V90 $677 SPTO -V90RED $677


22 418 492-2712

2016 $US

SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For N98-340H to N112-342H with semi industrial chute, 2 hydraulic functions 14-2100-01 $284 For N98-341HTR to N112-342HTR with semi industrial chute, 3 hydraulic functions 14-2100-02 $365 For N98-340H to N112-342H with telescopic chute, 3 hydraulic functions 14-2100-30 $427 For N98-341HTR to N112-342HTR with telescopic chute, 4 hydraulic functions. 14-2100-32 $500




N98-340H @ N112-342HTR

$188



PART #

PRICE

Box reducer with 3 gears (175HP) 1000@540RPM & reducer/reverser (225HP) 1 ¾ - 20 splines, including mounting kit

SBR-200

$2 883



23 418 492-2712

2016 $US

1 auger only (LP) 1 or 2 augers 1 auger only (LP) 1 or 2 augers

NORMAND N92-310H N92-312H N92-312HTR

N98-310H N98-310HTR

N98-340H N102-340H N98-312H

N98-312HTR N98-342H

N98-342HTR N102-342H

N102-342HTR N112-342H

N112-342HTR

Recommended horsepower (HP PTO) 85@140 85@140 85@140 100@160 100@160 85@140 100@160 100@160 100@160

Cutting width 92'' 92" 98" 98’’ 102'' 98" 98" 102'' 112'' Cutting height 38'' 41 ½'' 38'' 41 1/8'' 41 1/8'' 41 ½'' 48'' 48'' 48'' Impeller RPM 540 540 540 540 540 540 540 540 540 Impeller diameter 31'' 31" 31" 34'' 34'' 31" 34" 34" 34" Impeller depth 14 ¼'' 14 ¼'' 14 ¼'' 14 ¼'' 14 ¼'' 14 ¼'' 14 ¼'' 14 ¼'' 14 ¼'' Number of blades 5 5 5 5 5 5 5 5 5 Impeller shaft diameter 2" 2" 2" 2'' 2'' 2" 2" 2" 2'' Balanced impeller Std Std Std Std Std Std Std Std Std Drum center height 19 ½'' 19 ½'' 19 ½'' 21'' 21'' 19 ½'' 21" 21" 21'' Removable rotary drum - - / Std - / Std - - - / Std - / Std - / Std - / Std Cylinder for chute (deflector) 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" Chute rotation by hydraulic motor (gear with Std Std Std Std Std Std Std Std Std Manual deflector Std Std Std Std Std Std Std Std Std Hydraulic deflector Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Semi industrial chute (2 deflectors) Std Std Std Std Std Std Std Std Std Hydraulic telescopic chute Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Hoses holder Std Std Std Std Std Std Std Std Std Main auger diameter 23" 23" 23" 23'' 23'' 23" 23" 23" 23" Upper auger diameter - 13" - - - 13'' 17" 17" 17" Balanced auger Std Std Std Std Std Std Std Std Std Revesible carbon steel blade Std Std Std Std Std Std Std Std Std Reversible Hardox 450 blade Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Reversible stainless steel blade Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Tivar blade Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Lateral blades Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Adjustable carbon steel skid shoes Std Std Std Std Std Std Std Std Std Adjustable Hardox 450 skid shoes Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Adjustable stainless steel skid shoes Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Adjustable Tivar skid shoes Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Storage foot Std Std Std Std Std Std Std Std Std Driving chain number 80 80 80 100 100 80 100 100 100 Number of safety bolts 3 3 3 3 3 3 3 3 3 Bearing ductile iron casing Std Std Std Std Std Std Std Std Std Shaft P.T.O. standard T80 T80 T80 T80 T80 T80 T80 T80 T80 1 000 @ 540 reducer box Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Adjustable hitch Std Std Std Std Std Std Std Std Std Hitch category (QH = quick hitch) 2, QH 2, QH 2, QH 2, QH 2, QH 2, QH 2, QH 2, QH 2, QH

Approx. weight (lb) - 1 auger 1 753 lb 1 797 lb 1 969 lb

1 883 lb 2 073 lb 1 976 lb 2 001 lb 1 914 lb

2 107 lb 2 048 lb 2 193 lb

2 071 lb 2 215 lb

2 175 lb 2 320 lb


24


HE+ Series Normand snowblower with Essa+ scraper blade

Created and developed by a snow removal company, the scraper blade Essa + patented and used since 2002, added to a Normand snowblower is an evolved, complete and versatile tool.

The snowblower of the E+ serie keep the same specifications as the Normand snowblowers H series making it the fastest snow removal tool, the most effective, the most robust and the most successful of the market.

The Essa + scraper blade consists of Hardox 450 steel offering light weight, strength and excellent durability. Its 2 points of articulation are greasable, robust and durable.

The Essa + scraper blade is powered by two cylinders that can move down the scraper blade and raise the blower 7 ½ '' when the scraper blade is lowered to the maximum.

The cylinders are positioned so that they optimize the strength, the robustness and the durability of these and points of articulation.

Deployed to the front of the snowblower, the scraper blade Essa + is the only one making it possible to pick up the snow further ahead and avoiding to leave piles of undesired snow in front of garage doors or other obstacles.

The scraper blade deployed also allows you to leave before time without increasing your fast execution while offering a higher quality of surface cleaning and better service.

The scraper blade, in the raised position, allows the use of the snowblower its full cutting height (for snow blowers 1 auger). The scraper blade is easily removable. The body of the scraper can be removed simply by removing two attachment pins. Therefore the snowblower may be used conventionally.

Of series, rubber blades are fixed over the entire width of the scraper and along the sides. The very resistant rubber protects the asphalt and pavement streaks and traces of rust and also offers an incomparable quality of surface cleaning.

THE BEST QUALITY AT THE BEST PRICE!

Model shown : N98-342HE+


25 418 492-2712

2016 $US

Scraper blade Essa+ installed on snowblower with 1 auger

Scraper blade Essa+ installed on snowblower with 2 augers

3

2 1

3

2 1

The scraper blade, in the raised position, allows the use of the snowblower its full cutting height

4

Raise the snowblower 7 ½ '' when the scraper blade is lowered to the maximum.

The scraper blade, in the raised position, allows the use of the snowblower normally

4

Raise the snowblower 7 ½ '' when the scraper blade is lowered to the maximum.


26 418 492-2712

2016 $US

MODELS & BASE PRICES

H+ Series Normand snowblower with Essa+ scraper blade

N86-280HE+ N92-280HDE+ N92-310HE+ N98-342HE+

$10 214 $11 413 $12 495 $14 608

REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES CHUTE SELECTION for models N86-280HE+ & N92-280HDE+ PART # PRICE Semi-industrial with 1 flat deflector & 1 rounded deflector 29-0798 $810 Hydraulic telescopic (mounted cylinder included) 29-0670 $3 090

CHUTE SELECTION for models N92-310HE+ & N98-342HE+ PART # PRICE Semi-industrial with 1 flat deflector & 1 rounded deflector 29-1792 $986 Hydraulic telescopic (mounted cylinder included & 2 anti fog removable front panels) EN-CHU-I05 $3 336

OPTION FOR CHUTE PART # PRICE For chute 29-0798 Anti fog removable front panel 29-0798-60 $89 For chute 29-1792 Anti fog removable front panel 29-1792-60 $89




For chute 29-0798 Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve

EN-ROTE21

$540


EN-ROTE19

$540

For telescopic chute 29-0670 & EN-CHU-I05 Chute rotation kit including motor holder & hydraulic motor with chrome shaft and valve

EN-ROTE20

$560

Are included • H series snowblower • Carbon steel skid shoes and reversible blade • P.T.O. shaft • Hoses holder kit (EN-SUP02) • Essa+ scraper blade • Two (2) lift cylinders • Hoses from the cylinder to « T » connectors • Main et lateral rubber blades for the scraper

CHUTE NOT INCLUDED


27 418 492-2712

2016 $US

REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES (suite)

CHOICE OF PTO SHAFT PTO MODELS (1 3/8 – 6 splines snowblower side)

PART # PRICE (suppl.) 1 3/8 – 6 splines tractor side

T60 / N86-280HE+ 06-0015 Included T80 assy like a T60 (bigger) SPTO-T80/T60 $234

or side )

SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES KID SHOES & BLADES KITS



–

Inclus

Stainless steel (2)

N86-280HE+ SCPI-86H 604$ N92-280HDE+, N92-310HE+ SCPI-92H 621$ N98-342HE+ SCPI-98-342H 631$

Hardox 450

(1)

N86-280HE+ SCPH-86H 245$ N92-280HDE+, N92-310HE+ SCPH-92H 250$ N98-342HE+ SCPH-98-342H 255$

Tivar 88

(3)

N86-280HE+ SCPT-86H $690 N92-280HDE+, N92-310HE+ SCPT-92H $718 N98-342HE+ SCPT-98-342H $714

Blades & skid shoes wear not covered by the warranty.

HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For N86-280H with semi industrial chute, 2 hydraulic functions 14-2100-07 $278 For N92-280HD, N92-310H, N98-342H with semi industrial chute, 2 hydraulic functions 14-2100-01 $284 For N86-280H, N92-280HD, N92-310H, N98-342H with telescopic chute, 3 hydraulic functions 14-2100-30 $427

For scraper blade N86-280HE+ (From de « T » connector to the tractor) 14-2100-38 $131 For scraper blade N92-280DHE+, N92-310HE+ (From the «T » connector to the tractor) 14-2100-39 $131 For scraper blade N98-342HE+ (From the « T » connector to the tractor) 14-2100-40 $131


P.T.O. MODELS (1 ¾ - 20 splines snowblower side)

P.T.O. MODELS

1 3/8 - 6 splines – tractor side (without reducer box)

PART # PRICE (suppl.) PART # PRICE (suppl.) T80 N92-280HDE+, N92-310HE+,

& N98-342HE+ 06-0001 Included SPTO-T80RED $ 164

V80 (multilobes) SPTO-V80 $374 SPTO-V80RED $ 374 T90 (bigger) SPTO-T90 $566 SPTO-T90RED $ 566 V90 (bigger & multilobes) SPTO-V90 $677 SPTO-V90RED $ 677


28 418 492-2712

2016 $US

SPECIAL COLORS (ordered before fabrication) MODELS PRICE


N86-280HE+ & N92-280HDE+ N92-310HE+ & N98-342HE+

$188

NB : No cancellation of special color will be accepted


PART #

PRICE

Box reducer with 3 gears (175HP) 1000@540RPM & reducer/reverser (225HP) 1 ¾ - 20 splines, including mounting kit

SBR-200

$2 883

Model shown : N98-342HE+


29 418 492-2712

2016 $US

1 auger only 2 augers

HE+ series Normand snowblower with Essa+ scraper blade N86-280HE+ N92-280HDE+ N92-310HE+ N98-342HE+

Recommended horsepower (HP PTO) 60 @ 85 75 @ 120 85 @ 140 100 @ 160 Cutting width 86" 92'' 92'' 98" Overall width 90’’ 96’’ 96’’ 102’’ Cutting height 36" 36'' 38'' 48'' Impeller RPM 540 540 540 540 Impeller diameter 28 ½" 28 ½'' 31'' 34" Impeller depth 12'' 12'' 14 ¼'' 14 ¼'' Number of blades 4 4 5 5 Impeller shaft diameter 1 9/16" 2'' 2" 2" Balanced impeller Std Std Std Std Drum center height 17 ¾'' 17 ¾’’' 19 ½'' 22" Removable rotary drum - - - - Cylinder for chute (deflector) 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" 2 ½" X 8" Chute rotation by hydraulic motor (gear with cushion valve Std Std Std Std

Manual deflector Std Std Std Std Hydraulic deflector Opt. Opt. Opt. Opt. Semi industrial chute (2 deflectors) Std Std Std Std Hydraulic telescopic chute Opt. Opt. Opt. Opt. Hoses holder Std Std Std Std Main auger diameter 23" 23" 23" 23" Upper auger diameter - - - 17" Balanced auger Std Std Std Std Revesible carbon steel blade Std Std Std Std Reversible Hardox 450 blade Opt. Opt. Opt. Opt. Reversible stainless steel blade Opt. Opt. Opt. Opt. Tivar blade Opt. Opt. Opt. Opt. Lateral blades Opt. Opt. Opt. Opt. Adjustable carbon steel skid shoes Std Std Std Std Adjustable Hardox 450 skid shoes Opt. Opt. Opt. Opt. Adjustable stainless steel skid shoes Opt. Opt. Opt. Opt. Adjustable Tivar skid shoes Opt. Opt. Opt. Opt. Storage foot 80 Std Std Std Driving chain number Std 80 80 100 Number of safety bolts 2 3 3 3 Bearing ductile iron casing Std Std Std Std Shaft P.T.O. standard T60 T80 T80 T80 1 000 @ 540 reducer box Opt. Opt. Opt. Opt. Adjustable hitch Std Std Std Std Hitch category (QH = quick hitch) 2, QH 2, QH 2, QH 2, QH Approx weight (lbs) - 1 auger 1 847 2 090 2 343 2 508

The weight includes the scraper blade but doesn’t include chute and accessories. Specifications are subject to change without notice


30 418 492-2712

2016 $US

MODELS & BASE PRICES Snowblowers for sidewalks

50 @ 75 HP

N50-262 N60-262H $6 505 $6 684

REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES CHUTE SELECTION for models PART # PRICE For N50-262 Semi industrial with rounded deflector 29-3759 $752 For N60-262H Semi industrial with 1 flat deflector & 1 rounded deflector 29-3799 $685


CHUTE DEFLECTOR CONTROL* PART # PRICE Telescopic gap rod 29-0850 $93 Hydraulic cylinder (2"x 4") with flow reducer* for chute 29-3759 EN14-1013 $115 Hydraulic cylinder (2"x 6") with flow reducer* for chute 29-3799 EN14-1016 $125



Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve

EN-ROTE14

$514

P.T.O. SHAFT (1 3/8 – 6 splines snowblower side)

P.T.O. MODELS 1 3/8 – 6 splines tractor side PART # PRICE (suppl.)

T60 06-0015 Included T80 assembly like a T60 (bigger) SPTO-T80/T60 $234

• Standard color : Industrial yellow • Reversible carbon steel blade and skid shoes are included • PTO T60 Included; • Hoses holder kit (EN-SUP02) is included; • Side reinforcement and 3-pts hitch in Hardox 450; • Lateral blade in Hardox 450; • Two semi full flight augers

CHUTE NOT INCLUDED


31 418 492-2712

2016 $US

SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES HARDOX 450 TEETH on full flight auger PART # PRICE (suppl.) Hardox 450 teeth (For one auger) SDH-003 $588

HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE

For N50-262 & N60-262H with semi industrial chute, 2 hydraulic functions 14-2100-03 $269



Surfacer epoxy, urethane painting (black, blue, green, orange, red) N50-262 & N60-262H $165




32 418 492-2712

2016 $US 2 augers

Snowblowers for sidewalks N50-262 N60-262H

Recommended horsepower (HP PTO) 50 @ 75 50.@ 75 Cutting width 50’’ 60’’ Cutting height 37’’ 37’’ Impeller RPM 540 540 Impeller diameter 26’’ 26’’ Impeller depth 11’’ 11’’ Number of blades 4 4 Impeller shaft diameter 1 9/16’’ 1 9/16’’ Balanced impeller Std Std Drum center height 15’’ 15’’ Removable rotary drum - - Chute rotation by hydraulic motor Std Std Cylinder for chute (deflector) 2’’ x 4’’ 2’’ x 6’’ Manual deflector Std Std Hydraulic deflector Opt. Opt. Hoses holder Std Std Semi industrial chute (2 deflectors) Std Std Hydraulic telescopic chute - - Main auger diameter 19’’ 19’’ Upper auger diameter 13’’ 13’’ Balanced auger Std Std Revesible carbon steel blade Std Std Reversible Hardox 450 blade Opt. Opt. Reversible stainless steel blade Opt. Opt. Tivar blade Opt. Opt. Lateral blades Std Std Adjustable carbon steel skid shoes - - Adjustable Hardox 450 skid shoes Std Std Adjustable stainless steel skid shoes Opt. Opt. Adjustable Tivar skid shoes Opt. Opt. Storage foot Std Std Driving chain 80 80 Number of safety bolts 2 2 Bearing ductile iron casing Std Std Shaft P.T.O. standard T60 T60 Adjustable hitch Std Std Hitch category 2 2 Approx. weight (lb) - 1 auger 900 lb 950 lb


33 Effective April 1st, 2016 Normand Co. Ltd 418 492-2712

MODELS & BASE PRICES Pull type snowblower

N74-250HINV Skid shoes included




$5 882 $6 209 $7 720 $10 621

REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES CHUTE SELECTION PART # PRICE

N74-250HINV Semi industrial with 1 flat deflector & 1 rounded deflector 29-3784 $657




OPTION FOR CHUTE PART # PRICE

Anti fog removable front panel for chute 29-3784 29-3784-60 $89




CHUTE DEFLECTOR CONTROL PART # PRICE

Telescopic gap rod 29-0850 $93

N74-250HINV Hydraulic cylinder (2'' x 4'') including flow reducer* EN14-1013 $115

N82-260HINV Hydraulic cylinder (2'' x 6'') including flow reducer* EN14-1016 $125

N92-280HINV & N102-310HINV Hydraulic cylinder (2 ½'' x 8'')* 14-1011 $128



For N74-250HINV & N82-260HINV Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve

EN-ROTE14

$514

For N92-280HINV Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve

EN-ROTE15

$540

For N102-310HINV Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve

EN-ROTE16

$540

• Carbon steel skid shoes & reversible blade are included • PTO Included; • Hoses holder kit (EN-SUP02) is included; • Side reinforcement and 3-pts hitch in Hardox 450

CHUTE NOT INCLUDED


34 418 492-2712

2016 $US

SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES OPTION FOR PTO ON N74-240INV @ N102-310HINV PART # PRICE N74-250HINV Protective screen EN-DEFL05 $127 N82-260HINV Protective screen EN-DEFL03 $133 N92-280HINV Protective screen EN-DEFL01 $137 N102-310HINV Protectice screen EN-DEFL04 $149


Hardness level of material 1 being the hardest & 3 the softness. PART # PRICE (suppl.)

Carbon steel (2)


-

Included

Stainless steel (2)

N74-250HINV SCPI-74H $388 N82-260HINV SCPI-82H $410 N92-280HINV SCPI-92-280HINV $614 N102-310HINV SCPI-102-310HINV $639

Hardox 450

(1)

N74-250HINV SCPH-74H $211 N82-260HINV SCPH-82H $205 N92-280HINV SCPH-92-280HINV $222 N102-310HINV SCPH-102-310HINV $240

Tivar 88

(3)

N74-250HINV SCPT-74H $720 N82-260HINV SCPT-82H $719 N92-280HINV SCPT-92-280HINV $681 N102-310HINV SCPT-102-310HINV $749


35 418 492-2712

2016 $US

SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES (suite) FRAME FOR REAR BLADE (without blade, without cylinder, without chains)

PART #

PRICE

For N74-250HINV Frame for rear blade 29-5824 $783 For N82-260HINV Frame for rear blade 29-5825 $792 For N92-280HINV Frame for rear blade 29-5826 $908 For N102-310HINV Frame for rear blade 29-5823 $935

TYPES OF BLADES * PART # PRICE

Steel

N74-250HINV 29-5815-22 $130 N82-260HINV 29-5818-13 $135 N92-280HINV 29-5805-20 $146 N102-310HINV 29-5810-15 $167

Tivar 88

N74-250HINV 29-5815-16 $300 N82-260HINV 29-5818-05 $306 N92-280HINV 29-5805 $328 N102-310HINV 29-5810-11 $417

Rubber

N74-250HINV 29-5815-21 $338 N82-260HINV 29-5819-02 $357 N92-280HINV 29-5809-02 $375 N102-310HINV 29-5811-02 $493

CYLINDERS OR CHAINS FOR REAR BLADES *▪ PART # PRICE Hydraulic cylinder 2 x 6 (2 500 lb) - 2 units / rear blade 14-1016 $125 Hydraulic cylinder 2 x 6 HD (3 000 lb) - 2 units / rear blade 14-1016HD $149 Complete kit of chains 03-5215 $122

* These components are required for the warranty of the rear blade. ▪ These components are required for the mounting & installation of the blade at our plan.

HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For Pull type snowblower, 2 hydraulic functions 14-2100-12 $323 For rear blade with cylinder on Pull type snowblower 14-2100-13 $244


SPECIAL COLORS (ordered before fabrication) MODELS PRICE


N74-250HINV & N82-260HINV $165

N92-280HINV & N102-310HINV $188



36 418 492-2712

2016 $US

1 auger only

Pull Type snowblowers N74-250HINV N82-260HINV N92-280HINV N102-310HINV Recommended horsepower (HP PTO) 25 @ 45 40 @ 65 60 @ 85 85 @ 140 Cutting width 74" 82" 92" 102 Cutting height 28" 28 ½’’ 31 5/8" 37’’ Impeller RPM 540 540 540 540 Impeller diameter 25" 26" 28 ½" 31 Impeller depth 9" 11" 12" 14 ¼’’ Number of blades 4 4 4 5 Impeller shaft diameter 1 9/16" 1 9/16" 1 9/16" 2'' Balanced impeller Std Std Std Std Drum center height 14 ½" 14 ½" 16 ¼" 18 ½’’ Removable rotary drum - - - - Cylinder for chute deflector 2" X 4" 2" X 6" 2 ½’’ X 8" 2 ½’’ X 8" Chute rotation by hydraulic motor Std. Std. Std Std Manual deflector Std Std Std Std Hydraulic deflector Opt. Opt. Opt. Opt. Semi industrial chute (2 deflectors) Std Std Std Std Hydraulic telescopic chute - - - - Main auger diameter 17" 17" 18" 22’’ Hoses holder Std Std Std Std Balanced auger Std Std Std Std Adjustable carbon steel skid shoes Std Std Std Std Adjustable Hardox 450 skid shoes Opt. Opt. Opt. Opt. Adjustable stainless steel skid shoes Opt. Opt. Opt. Opt. Tivar blade Opt. Opt. Opt. Opt. Adjustable carbon steel skid shoes Std - - Std Adjustable Hardox 450 skid shoes Opt. Opt. Opt. Opt. Adjustable stainless steel skid shoes Opt. Opt. Opt. Opt. Adjustable Tivar skid shoes Opt. Opt. Opt. Opt. Storage foot Std Std Std Std Driving chain 60 60 80 80 Number of safety bolts 2 2 2 3 Bearing ductile iron casing Std Std Std Std Shaft P.T.O. standard T40 long T60 long T60 long T80 long Hitch category (QH = Quick hitch) 1, 1 QH 1 & 2 2 2 Approx. weight (lb) - 1 auger 740 lb 900 lb 1 325 lb 1 850 lb


37


2016 $US

MODELS & BASE PRICES 100 @ 180 HP 100 @ 200 HP 140 @ 200 HP 140 @ 350 HP 250@ 350 HP N99-342HTRSI N100-342TRI N100-362TRI 200 N100-362TRI 300 N102-402TRI

$19 701 $25 398 $28 826 $30 518 $35 560 N110-342TRI N110-362TRI 200 N110-362TRI 300 N110-402TRI $27 748 $31 176 $32 868 $38 910 N120-342TRI N120-362TRI 200 N120-362TRI 300 N120-402TRI $28 218 $31 646 $33 338 $39 380

The HP PTO ranges mentionned are the minimum & the maimum required for effective and durable usage

On all industrial models, the chute is on the left side of the snowblower (tractor view).

REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES CHUTE SELECTION for model N99-342TRSI PART # PRICE

Semi industrial with 1 flat deflector & 1 rounded deflector 29-1792 $986 Hydraulic telescopic (mounted cylinder included & 2 anti fog removable front panels) EN-CHU-I05 $3 336

CHUTE SELECTION for models N100-342TRI & N100-362TRI PART # PRICE

Semi industrial «with 1 flat deflector & 1 rounded deflector 29-1789 $986 Hydraulic telescopic (mounted cylinder included & 2 anti fog removable front panels) EN-CHU-I03 $3 614 Telescopic with articulated deflectors (cylinder mounted Included) EN-CHU-I02 $4 996

OPTION FOR CHUTE PART # PRICE For chute 29-1792 Removable front panel anti fog 29-1792-60 $89 For chute 29-1789 Removable front panel anti fog 29-1789-60 $89

CHUTE SELECTION for model N102-402TRI PART # PRICE Semi industrial «with 1 flat deflector & 1 rounded deflector 29-1789 $986 Telescopic with articulated deflectors (cylinder mounted Included) EN-CHU-I01 $5 010

CHUTE DEFLECTOR CONTROL* PART # PRICE Hydraulic cylinder (2 ½'' x 8'') 14-1011 $128


ACCESSORIES INCLUDED IN THE BASE PRICES

• Two full flight augers without teeth (semi full flight augers); • Lower auger with Hardox 450 teeth • Fixed lateral blades (except N99-342HTRSI); • Hardox 450 skid shoes and blades; • Hydraulic motor with chrome shaft and valve for drum rotation included.

CHUTE & P.T.O. SHAFT NOT INCLUDED


38 418 492-2712

2016 $US

REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES (suite) CHUTE ROTATION PART # PRICE


EN-ROTE16

$540

For EN-CHU-I05 Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve

EN-ROTE17

$540

N100-342TRI et N100-362TRI Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve

EN-ROTE09

$663

N102-402TRI Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve

EN-ROTE10

$676

DRUM ROTATION PART # PRICE Hydraulic motor with chrome shaft and valve 14-8206-25 Included

P.T.O. SHAFT (PTO) (1 ¾ - 20 splines, snowblower side)

PTO MODELS 1 3/8 - 21 splines – tractor side 1 3/4 - 20 splines – tractor side

PART # PRICE PART # PRICE

V80 06-0022 $961 06-0018 $961 V90 06-0028 $1 377 06-0019 $1 310

W2600 / with clutch 06-0023 $2 017 For N100-342TRI to N120-402TRI Clutch in replacement of shear plates and safety bolt on driving shaft for the augers SEMB-001 $1 170(suppl.)

BOX REDUCER PART # PRICE

For N99-342HTRSI, N100-342TRI Box reducer with 3 gears (175HP) 1000@540RPM & reducer/reverser (225HP) 1 ¾ - 20 splines, including mounting kit

SBR-200

$2 883

For N100-362TRI 200 Box reducer with 3 gears (175HP) 1000@540RPM & reducer/reverser (225HP) 1 ¾ - 20 splines, including mounting kit

SBR-200H

$2 961

For N100-362TRI 300HP & N102-402TRI Box reducer with 2 gears (350 HP) 1000@540RPM

SBRI-300

$3 576

For N100-362TRI 300HP & N102-402TRI Box reducer with 3 gears (350 HP) 1000@540RPM (Normand case exclusively)

SBR-300

$4 692

For all models of boxes reducer or accelerator, specifications & prices, see pages 44 @ 46.

SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES LUBRIFICATION SYSTEM INCLUDING PUMP AND TANK * PART # PRICE

For N102-402TRI Lubrification system SBRI-300 14-8013 $1 488 For N100-362TRI300 Lubrification system SBRI-300 14-8014 $1 488 For N102-402TRI Lubrification system SBR-300 14-8015 $1 488 For N100-362TRI300 Lubrification system SBR-300 14-8016 $1 488

* Recommended on tractor more than 250 HP.


39 418 492-2712

2016 $US

SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES (suite) LATERAL BLADES HARDOX 450 PART # PRICE N99-342HTRSI Fixed lateral blades (55'' x 4'') 50-1318 included N99-342HTRSI & N100-342TRI Hydraulic blades + cylinder (84'' x10'') in Hardox 450 50-1810 $3 121

N110-342TRI Hydraulic blades + cylinder (84'' x10'') in Hardox 450 70-0010 $3 149 N120-342TRI Hydraulic blades + cylinder (84'' x10'') in Hardox 450 70-0020 $3 177 N100-362TRI Hydraulic blades + cylinder (84'' x 10'') in Hardox 450 50-3800 $3 121 N110-362TRI Hydraulic blades + cylinder (84'' x 10'') in Hardox 450 50-3808 $3 183 N120-362TRI Hydraulic blades + cylinder (84'' x 10'') in Hardox 450 50-3809 $3 215 N102-402TRI Hydraulic blades + cylinder (96'' x 16'') in Hardox 450 50-2810 $3 909 N110-402TRI Hydraulic blades + cylinder (96'' x 16'') in Hardox 450 70-0030 $3 934 N120-402TRI Hydraulic blades + cylinder (96'' x 16'') in Hardox 450 50-2815 $3 957

KIT OF LATERAL EXTENSION 3'' - left & right PART # PRICE For N99-342HTRSI & N100-342TRI EN-EL301 $795 For N100-362TRI EN-EL302 $815 For N102-402TRI EN-EL303 $932

RUBBER KIT PART # PRICE For N100-342TRI Front rubber lining kit 50-1193 $440 For N110-342TRI Front rubber lining kit 70-0011 $450 For N120-342TRI Front rubber lining kit 70-0021 $450 For N100-362TRI Front rubber lining kit 50-3180 $460 For N110-362TRI Front rubber lining kit 50-3181 $469 For N120-362TRI Front rubber lining kit 50-3182 $494 For N102-402TRI Front rubber lining kit 50-2180 $491 For N110-402TRI Front rubber lining kit 70-0031 $508 For N120-402TRI Front rubber lining kit 50-2181 $525

NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.

ADJUSTABLE WHEELS KIT IN HARDOX 450 (in replacement of skid shoes) PART # PRICE (suppl.)

For N100-342TRI & N100-362TRI Extra charge for 2 wheels

S50-3355

$588

For N102-402TRI Extra charge for 2 wheels S50-0355 $588

HARDOX 450 TEETH ON FULL FLIGH AUGER PART # PRICE (suppl.) For N99-342HTRSI For one auger S50-4200 $588 For N100-342TRI, N100-362TRI For one auger S50-1203 $588 For N102-402TRI For one auger S50-0200 $588


40 418 492-2712

2016 $US

SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES (suite)

HARDOX 450 IMPELLER WITH REPLACEABLE BLADES PART # PRICE (suppl.) For N100-342TRI Impeller S50-1252 $982 For N100-362TRI 200 Impeller S50-3250 $1 007 For N102-402TRI Impeller S50-2251 Included

SET OF TIVAR SIDE PROTECTOR PART # PRICE For N100-362TRI Set of Tivar side protector – for one side EN-PROTIV362 $423

SET OF QUICK ATTACHMENT #3 CATEGORY PART # PRICE

For N100-342TRI & N100-362TRI Set of quick attachment # 3 category EN-QH01 $1 227

For N102-402TRI Set of quick attachment # 3 category EN-QH02 $1 227

LIGHTS & HOLDER PART # PRICE For N100-342TRI & N100-362TRI Right side on base of chute 50-1850 $375 For N100-342TRI & N100-362TRI Left side on base of chute 50-1851 $375 For N102-402TRI Right side on base of chute 50-0850 $375 For N102-402TRI Left side on base of chute 50-0851 $375 For telescopic chute (Left side) 50-0853 $423 For telescopic chute (Right side) 50-0852 $423

HOSES KIT WITH CONNECTORS – NOT INSTALLED - To the tractor

PART #

PRICE

For N99-342HTRSI with semi industrial chute, 3 hydraulic functions 14-2100-02 $365 For N99-342HTRSI with telescopic chute, 4 hydraulic functions 14-2100-32 $500

HOSES KIT WITH CONNECTORS – NOT INSTALLED – To the distribution plate

PART #

PRICE

SNOWBLOWER For N100-342TRI & N100-362TRI, 2 hydraulic functions 14-2100-14 $290

For N100-342TRI & N100-362TRI, Hydraulic lateral blades, 1 hyd. function 14-2100-17 $97

For N102-402TRI, 2 hydraulic functions 14-2100-21 $294

For N102-402TRI – Hydraulic latera blades, 1 hydraulic function 14-2100-20 $113

CHUTE

For N100-342TRI @ N100-362TRI – Semi industrial chute, 1 hydraulic function 14-2100-15 $113

For N100-342TRI @ N102-402TR – Telescopic chute, 2 hydraulic functions 14-2100-16 $268

For N100-342TRI @ N102-402TRI – Articulated telescopic chute, 2 hydraulic functions

14-2100-19

$295


41 418 492-2712

2016 $US

HOSES KIT WITH CONNECTORS – NOT INSTALLED Of the distribution plate up to the tractor

PART #

PRICE

For N100-342TRI @ N102-402TRI, 1 set required for each of these options : chute rotation, drum rotation, cylinder etc…

14-2100-18

$99


Because we want ou industrial snowblowers to be both sturdy and lightweight, we use ultra high quality Hardox 450 steel to manufacture the most heavy-duty components.

Compare to the standard steel, Hardox 450 is about 4,5 times harder and more wear resistant while also being 3,5 times more rigid. For instance, a ¼’’ thick Hardox 450 plate is the equivalent of a ¾’’ thick standart steel plate.

Components made with Hardox 450 steel :

• Snowblower side (except on N99-342HTRSI); • Reinforcement snowblower sides; • Drum outline • Impeller with removable blades; • Chute base (except on N99-342TRSI); • Chute gear (except on N99-342TRSI); • Articulated chute deflector; • Full flight auger teeth; • Adjustable wheels and skid shoes; • Removable lateral skid shoes; • Reversible blades; • Lateral blades (except on N99-342HTRSI)); • Double botton (except on N99-342HTRSI); • Oil bath • 3-points plates


42 418 492-2712

2016 $US

2 augers

Industrial snowblowers

N99-342HTRSI N100-342TRI N100-362TRI (200 HP)

N100-362TRI (300 HP) N102-402TRI

Cutting width 99’’ 100’’ 100’’ 100’’ 102’’

Cutting height 48’’ 50’’ 52’’ 52’’ 61’’

Recommended horsepower (HP, PTO) 100 @ 180 100 @ 200 140 @ 200 140 @ 350 250 @ 350

Impeller RPM 540 540 540 540 540

Snowremovale capacity ton / hour 1500 1500 1800 1800 3000

Impeller shaft diameter 2’’ 2 ‘’ 2 1/2’’ 2 1/2’’ 2 1/2’’

Drum contour in Hardox 450 Std Std Std Std Std

Impeller diameter 34’’ 34’’ 35 ¾’’ 36’’ 39 ¾’’

Impeller depth 14 ¼’’ 13 ½’’ 13 ½’’ 13 ½’’ 15’’

Number of blades 5 5 5 5 5

Full flight main auger diameter 23’’ 21’’ 21’’ 21’’ 23’’

Full flight main auger diameter 17’’ 21’’ 21’’ 21’’ 23’’

Driving chain 100 Renold 100 HV Renold 100 HV Renold 100 HV Renold 100 HV

Number of safety bolts 2 2 2 2 2

Bearing ductile iron casing Std Std Std Std Std

Cylinder (close length) Cylinder for chute deflector

20 ¼’’ 2 ½’’ x 8’’

20 ¼’’ 2 ½’’ x 8’’

20 ¼’’ 2 ½’’ x 8’’

20 ¼’’ 2 ½’’ x 8’’

20 ¼’’ 2 ½’’ x 8’’

Drum center height 21’’ 22’’ 23’’ 23’’ 25 3/4’’

Balanced impeller Std Std Std Std Std

Impeller with Hardox 450 replaceable blades Opt Opt Opt Opt Opt

Balanced augers Std Std Std Std Std

Hardox 450 spiked augers (main - upper) Opt Opt Opt Opt Opt

Removable rotary drum Std Std Std Std Std

Reversible carbon steel blade - - - - -

Reversible Hardox 450 blade Std Std Std Std Std

Hydraulic lateral blades - Opt Opt Opt Opt

Lateral Hardox 450 skid shoes - Std Std Std Std

Adjustable Hardox 450 skid shoes Std Std Std Std Std

Adjustable wheels in Hardox 450 - Opt Opt Opt Opt

Chute rotation by hydraulic motor Std Std Std Std Std

Shaft P.T.O. standard V80 or V90 V80 or V90 V80 or V90 V90 V90

1 000 @ 540 reducer box Opt (recommended) Opt (recommended) Opt (recommended) Opt (recommended) Opt (recommended)

Hitch category (QH = quick attach) 2 QH 2 2 2 3

Light holder on snowblower Opt Opt Opt Opt Opt

Light holder on chute Opt Opt Opt Opt Opt

Approx. weight (lb) 2 575 lb 3 550 lb 3 650 lb 3 720 lb 5 580 lb


43


2016 $US

PART#

DESCRIPTION

PICTURE

REVERSES DIRECTION

OF ROTATION

RATIO

RPM

CAPACITY AT

1000 RPM

CENTER

TO CENTER SHAFT

INPUT SHAFT

OUTPUT SHAFT

PRICES

06-2154

Box 2 gears

YES

1,8:1 1000 to

555

75 HP

4,85" 1 3/8"-6

male 1 3/8" - 6 female

$1 497

06-2158

Box 2 gears

1,8:1 1000 to

555

85 HP

4,85" 1 ¾"-20

male 1 ¾"-20 female

$1 638

06-2147

Box 2 gears

YES

1,86:1 1000 to

538

300 HP

6,75" 1 3/4"-

20 male 1 ¾"-20 female

$3 245

SBRI-300

Box 06-2147 including mounting kit (brackets and hardware) / For N100-362TRI (300HP) & N102-402TRI

$3 576

For N92-280 @ N104-342TR / For N99-342TRSI @ N100-362TRI

06-2164

Box 3 gears

YES

1,86:1 1000 to

540

225 HP

6,75"

1 ¾" - 20 male

1 ¾"- 20 female

$2 825

NO

1,86:1 1000 to 540

175 HP

8"

SBR-200-280

Box 06-2164 including mounting kit (brackets and hardware) / For N92-280H & N98-280H

$2 883

SBR-200 Box 06-2164 including mounting kit (brackets and hardware) / For N98-340H to N112-342HTR

N99-342TRSI & N100-342TRI

$2 883

SBR-200H Box 06-2164 including mounting kit (brackets and hardware) / For N100-362TRI $2 961

For N100-362TRI & N102-402TRI

06-2155

Box

3 gears

NO

1,88:1

1000 to

531

350 HP

9"

1 ¾" -

20 male

1 ¾ " -20 female

$4 488

SBR-300

Box 06-2155 including mounting kit (brackets and hardware) / For N100-362TRI & N102-402TRI

$4 692

The type of oil to be used in rising & reducer boxes of this page :

Synthetic oil 75W140

RISING & REDUCER BOXES


44 418 492-2712

2016 $US

RISING BOX FOR NORMAND SNOWBLOWERS

PART#

DESCRIPTION

PICTURE

REVERSES DIRECTION

OF ROTATION

RATIO

RPM

CAPACITY

AT 1000 RPM

CENTER

TO CENTER SHAFT

INPUT SHAFT

OUTPUT SHAFT

PRICES

06-2153

Box 2 gears

YES

1:1 540 to

540

75 HP

4,85" 1 3/8"-6

male 1 3/8"-6 female

$1 326

06-2157

Box 2 gears

YES

1:1 540 to

540

85 HP

4,85" 1 ¾"-20

male 1 ¾’’-20 female

$1 622

06-2151

Box 2 gears

YES

1:1

540 to 540

150 HP

6,75"

1 ¾" - 20

male

1 ¾" - 20 female

$2 171

The prices above do not include installation & mounting kit

RISING & ACCELERATOR BOXES FOR ECONOR MODELS

PART#

DESCRIPTION

REVERSES DIRECTION

OF ROTATION

RATIO

RPM

CAPACITY

AT 1000 RPM

CENTER TO

CENTER SHAFT

INPUT SHAFT

OUTPUT SHAFT

PRICES

06-2300

Rising & accelerator box

E48-200 to E72-240

NO

1:1.28

540 to 644

30 HP

4 3/8''

1 3/8"-6

male

1 3/8"-6 female

$561

06-2302 Rising &

accelerator box E78-240

NO

1:1.28

540 to 644

30 HP

6 1/2"

1 3/8"-6

male

1 3/8"-6 female

$561

06-2303 Rising box E86-280 & E94-280

NO

1:1

540 to 540

60 HP

6 1/2"

1 3/8"-6

male

1 3/8"-6 female

$928

The type of oil to be used in rising & accelerator boxes for ECONOR models :

Chain lubricant spray

The type of oil to be used in rising boxes (with gears) for Normand snowblowers :

Synthetic oil 75W140


45 418 492-2712

2016 $US

FOR 30 TO 70 HP TRACTORS (06-1952) AVAILABLE

RATIO RPM SHAFT CENTER TO

CENTER SHAFT PRICES IN OUT IN OUT

1:1 540 540 1 3/8"-6 male 1 3/8"-6 male 8" and more

$2 294 1:1,12 540 604 1 3/8"-6 female 1 3/8"-6 male 10 " and more

1:1,25 540 675 1 3/8"-6 female 1 3/8"-6 male 10 " an more

FOR 70 TO 150 HP TRACTORS (06-1950) AVAILABLE

RATIO RPM SHAFT CENTER TO

CENTER SHAFT

PRICES

IN OUT IN OUT

1 :1

540

540

1 3/4"-20 male

1 3/4"-20 male

10 " and more

$2 310

* Distance required between the two shafts (B) when you order

GEAR BOXES FOR FRONT MOUNTED SNOWBLOWERS


46 418 492-2712

2016 $US

SPREADERS

SCR model

S3P model

47

2016 $US

SELF LOADING SAND AND SALT SPREADERS

SCR ECONOMIC Normand’s SCR spreader is perfect to spread sand, salt and other aggregate to control ice and snow on driveways, parking lots, sidewalks and other applications

SPREADING You can get the desired flow by adjusting the rotational speed of the feeding roller as well as the opening of the shutter.

Spreading pattern

FRONT MOUNTING Normand’s SCR spreader can be installed on the front

loader of most tractor. Adjustable plates are installed on the spreader to receive various quick attachments available on the market

QUICK LOADING - LABOR SAVING This heavy-duty spreader is easy to use. Use the hopper as a bucket in the lower position. Drive the tractor into the sand pile and then load. Put the spreader back in the upper position, start hydraulic control and spread the material. Can be operated by a single person.

REAR MOUNTING Normand’s SCR spreader can also be installed on a 3- points rear tractor hitch. (cat # 2). However, a hydraulic cylinder system is required (Optional)

INSTALLATION ON SKID STEER Normand’s SCR spreader can be

installed on the loader of a skid steer. An optional attachment must be fixed to the spreader to receive the skid steer’s quick attach.


48

2016 $US

E 2

MODELS SCR-54 SCR-72 SCR-86 SCR-92 SCR-98

PRICES $3 123 $3 273 $3 471 $3 631 $3 695 CAPACITY The capacity in lb may vary depending on the type of material being used.

0,55 yard 1 340 lb

0.7 yard 1 700 lb

1.1 yard 2 670 lb

1.2 yard 2 910 lb

1.3 yard 3 160 lb

Width 54‘‘ 72‘‘ 86‘‘ 92‘‘ 98‘‘ Depth 35‘‘ 35‘‘ 37‘‘ 37‘‘ 37’‘ Height 32‘‘ 32‘‘ 38‘‘ 38‘‘ 38‘‘ Spread width 48‘‘ 66‘‘ 80‘‘ 86‘‘ 92‘‘ Cushion Valve Included Included Included Included Included Check Valve Included Included Included Included Included Hydraulic motor Included Included Included Included Included Weight 349 lb 518 lb 749 lb 787 lb 825 lb Request : GPM (min. @ max.) PSI (minimum)

8 @ 16 GPM

1 300 PSI

8 @ 16 GPM

1 300 PSI

8 @ 16 GPM

1 300 PSI

8 @ 16 GPM

1 300 PSI

8 @ 16 GPM

1 300 PSI

* Hoses not included

BOLTED PLATES INCLUDED (2) EN-ATTSCR04 for SCR-54 EN-ATTSCR04 for SCR-72 “ SCR-98

The dealer must weld on the two attachment plates bolted to the spreader the 2 appropriate attachment ** for the model of loader to be used. **These attachments are not included and not available at Normand Company Ltd. Attachments prices & installation fees are under the responsability of the dealer.

Note : Some attachment must be welded according to a particular angle for complete unloading.

EN-ATTSCR03 Quick attach for skid steer

OPTIONS For SCR-54 (65 lb) EN-ATTSCR06 : $350

For SCR-72 @ SCR-98 (65 lb) EN-ATTSCR03 : $356 Installation fees not included – to be supplied by the dealer

Mechanism for 3-points rear tractor hitch

-Including 2 hydraulic cylinders w/o hoses

Cyl. SCR 86/92/98 3 x 6’’ Cyl. SCR 72 2 ½ x 6’’

OPTIONS

SCR-54 & SCR-72 : Attachment cat. #1 (130 lb) EN-ATTSCR01 : $1 071 SCR-86 @ SCR-98 : Attachment cat. #2 (160 lb) EN-ATTSCR02 : $1 282 Installation fees not included – to be supplied by the dealer

ffective April 1st, 2015 No and Co. Ltd 418 492-271

49

2016 $US

SPREADER ON 3-POINTS HITCH S3P

S3P spreader

ECONOMIC

S3P salt and sand spreader is perfect for controlling snow and ice on roads, driveways, sidewalks and others applications.

SPREAD

You can get the desired flow by adjusting the rotational speed of the hydraulically- powered feeding roller as well as the opening of the shutter.

The spreader is mounted on the 3-points rear tractor hitch. Category # 1

MODELS S3P-46 S3P-56

PRICES $2 797 $2 889 Capacity The capacity in lb may vary depending on the type of material being used

0,41 yard

996 lb

0,5 yard 1 215 lb

Spread width 43'' 53'' Width 47'' 57'' Depth 33'' 33'' Height 34 ½'' 34 ½'' Hydraulic motor Included Included Cushion valve Included Included Check valve Included Included Top Screen Included Included Hitch category # 1 # 1 Weight 300 lb 335 lb Request GPM minimum @ maximum PSI (minimum)

<

11@16 GPM 1 300 PSI

11@16 GPM

1 300 PSI


50 418 492-2712

2016 $US

INFORMATIONS ON CHUTES


51 418 492-2712

2016 $US

TYPES OF CHUTES

Models Parts # / weight

Regular

Semi industrial Hydraulic telescopic

Telescopic with articulated deflectors

E48-200 @ E78-240 49-3500 37 lbs

49-3789 70 lbs - -

E86-280 & E94-280 49-0500 58 lbs

49-0798 132 lbs - -

E100-310 49-7500 78 lbs - - -

E68-220INV 49-5500 40 lbs

- - -

E80-260INV - 49-0785 100 lbs - -

N50-262 & N60-262 - 29-3799 102 lbs - -

N54-240H @ N74-250H - 29-3789 80 lbs - -

N74-260H @ N86-260HTR - 29-3799 102 lbs - -

N74-250HINV - 29-3784 80 lbs - -

N82-260HINV - 29-3783 108 lbs - -

N86-280H @ N92-280HDTR N98-280H

- -

29-0798 140 lbs

29-0670 467 lbs

- -

N92-280HINV - 29-0798 140 lb

N102-310HINV - 29-1792 150 lbs - -

N92-310H @ N112-342HTR, N99-342HTRSI - 29-1792

150 lbs EN-CHU-I05

575 lbs -

N100-342TRI, N100-362TRI (200 hp) N100-362TRI (300 hp)

- 29-1789

150 lbs EN-CHU-I03

558 lbs EN-CHU-I02

890 lbs

N102-402TRI -

- 50-0775

230 lbs

- EN-CHU-I01

956 LBS


52 418 492-2712

2016 $US

TYPES OF CHUTES (suite)

Semi industrial chutes

MODELS Part # A* B* C* N54-240H @ N74-250H 29-3789 31 ¼’’ 19 13/16’’ 40 13/16’’ N74-260H @ N86-260HTR N50-262 & N60-262

29-3799 37 3/16’’ 23’’ 48 ¾’’

N86-280H @ N92-280H, N92-280HD & HDTR, N98-280H N92-280HINV

29-0798

54 3/8’’

26 13/16’’

56 ¼’’

N92-310H N92-312H & HTR N98-310H & HTR N98-311H @ N112-342HTR N99-342TRSI N102-310HINV

29-1792

45 11/16’’

28 ¼’’

60 3/8’’

N74-250HINV 29-3784 31 ¼’’ 19 13/16’’ 40 13/16’’

N82-260HINV 29-3783 37 3/16’’ 23’’ 48 ¾’’

N100-342TRI & N100-362TRI 29-1789 43 ¼’’ 25 13/16’’ 57 13/16’’

N102-402TRI 50-0775 47 ¾’’ 27 ½’’ 62 7/16’’

* All dimensions are in inches

Semi Industrial chutes


53 418 492-2712

2016 $US

TYPES OF CHUTES (suite)

Hydraulic telescopic chutes Models Chute # E* F* G* H* I* J* N86-280H, N86-282H, N92-280H, N92-280HD, N98-280H

29-0670

125 5/16

120 ¼

142 1/16

99 5/16

93 ¼

115 1/16

N86-280HTR, N86-282HTR, N92-280HDTR

29-0670 128 7/16 122 3/8 144 3/16 101 7/16 95 3/8 117 3/16

N92-310H, N92-312H, N98-310H, N98-312 29-1697 161 15/16 143 3/16 180 1/8 135 13/16 117 1/16 153 5/16

N92-312HTR, N98-310HTR, N98-312HTR 29-1697 162 5/8 143 7/8 180 13/16 136 ½ 117 ¾ 154

N98-342H, N102-340H, N102-342H, N112-342H 29-1697 156 5/16 137 9/16 174 ½ 130 3/16 111 7/16 147 11/16

N98-342HTR, N102-342HTR, N112-342HTR 29-1697 155 7/8 137 1/8 174 1/16 129 ¾ 111 147 ¼

N99-342hTRSI 29-1697 171 5/8 152 7/8 189 13/16 145 ½ 126 ¾ 163 N100-342TRI 29-1697 154 1/16 135 5/16 172 ¼ 127 15/16 109 3/16 145 7/16

N100-362TRI 29-1697 156 137 1/4 174 3/16 129 7/8 111 1/8 147 3/8

Telescopic chute with articulated deflectors Chute # K* L* M* N* O* P*

N100-342TRI 50-1680 152 ¾ 135 150 ¼ 125 ¾ 108 123 ¼ N100-362TRI 50-1680 155 137 ½ 152 ¾ 128 110 ½ 125 ¾ N102-402TRI 50-1680 161 ½ 143 ¾ 159 134 ½ 116 ¾ 132

* All dimensions are in inches

Hydraulic telescopic chutes

Telescopic chute with articulated deflectors


54 418 492-2712

NORMAND CO. LTD 340, rue Taché, St-Pascal (Qc) Canada G0L 3Y0

t. 418-492-2712 / 1 888-666-7626

e-mail : [email protected] Web site : www.cienormand.com

www.facebook.com/cienormand

mailto:[email protected]

http://www.cienormand.com/

http://www.facebook.com/cienormand

price quote for: aftermarket tractor/skidsteer attachments ......seq. #416-1216 minnesota pricing...

Documents