proceedings of the 8th pacific rim international the 8th pacific rim international congress on...

Download Proceedings of THE 8TH PACIFIC RIM INTERNATIONAL the 8th pacific rim international congress on advanced

Post on 03-Sep-2019

0 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • THE 8TH PACIFIC RIM INTERNATIONAL CONGRESS ON ADVANCED MATERIALS AND PROCESSING

    Proceedings of

  • Sponsored by

    The Chinese Society for Metals (CSM),

    The Japan Institute of Metals (JIM),

    The Korean Institute of Metals and Materials (KIM),

    Materials Australia (MA), and

    The Minerals, Metals & Materials Society (TMS)

    Held

    August 4-9, 2013, at the Hilton Waikoloa Village

    in Waikoloa, Hawaii, USA

    Edited by

    Fernand Marquis

    THE 8TH PACIFIC RIM INTERNATIONAL CONGRESS ON ADVANCED

    MATERIALS AND PROCESSING

    Proceedings of

  • Copyright © 2013 by The Minerals, Metals & Materials Society. All rights reserved.

    Published by John Wiley & Sons, Inc., Hoboken, New Jersey. Published simultaneously in Canada.

    No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of The Minerals, Metals, & Materials Society, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, (978) 750-8400, fax (978) 750-4470, or on the web at www.copyright.com. Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, (201) 748-6011, fax (201) 748-6008, or online at http:// www.wiley.com/go/permission.

    Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in preparing this book, they make no representations or warranties with respect to the accuracy or completeness of the contents of this book and specifically disclaim any implied warranties of mer- chantability or fitness for a particular purpose. No warranty may be created or extended by sales rep- resentatives or written sales materials. The advice and strategies contained herein may not be suitable for your situation. You should consult with a professional where appropriate. Neither the publisher nor author shall be liable for any loss of profit or any other commercial damages, including but not limited to special, incidental, consequential, or other damages.

    Wiley also publishes books in a variety of electronic formats. Some content that appears in print may not be available in electronic formats. For more information about Wiley products, visit the web site at www.wiley.com. For general information on other Wiley products and services or for technical sup- port, please contact the Wiley Customer Care Department within the United States at (800) 762-2974, outside the United States at (317) 572-3993 or fax (317) 572-4002.

    Library of Congress Cataloging-in-Publication Data is available.

    ISBN 978-0-470-94309-0

    Printed in the United States of America.

    10 9 8 7 6 5 4 3 2 1

    http://www.copyright.com http://www.wiley.com/go/permission http://www.wiley.com/go/permission http://www.wiley.com

  • v

    TABLE OF CONTENTS PRICM-8: 8th Pacific Rim International

    Congress on Advanced Materials and Processing

    Preface ................................................................................................. liii About the Editor/Congress Organizers ............................................... lvii

    Symposium A. Materials for Energy

    Research and Production of Heavy Pipeline Plate for Submarine Gas Transmission Lines at Shougang Steel .................................................. 3 S. Li, C. Zha, J. Li, and W. Ding

    Microstructure Characterization in Domestically-Made TP310HNbN Austenitic Stainless Steel After Creep Test ......................................... 13 S. Li, C. Zha, J. Li, and W. Ding

    Recent Niobium Developments for High Strength Steel Energy Applications......................................................................................... 19 S. Jansto

    Synthesis, Characterization and Pseudo-Capacitive Performance of MnOx/CNT Heteronanostructures ....................................................... 27 K. Mondal and C. Tsai

    Evaluation of the Electrical Resistance and Capacitance of a Di-Electric Electro-Active Polymer..................................................... 35 B. Ng, G. Lovhoiden, and J. Magbanua

    Electrochemical Performance of LIMN0.5-xNi0.5-xAl2xO2 by Hydrothermal Method ......................................................................... 45 S. Woo, S. Lee, K. Lee, and Y. Yoon

    Electrochemical Deposition of High Purity Silicon in Molten Salts ... 51 G. Haarberg

    Nano Scale Energetic Materials: Theoretical and Experimental Updates ................................................................................................ 57 K. Martirosyan, Z. Ramazanova, and M. Zyskin

  • vi

    First Principles Studies of Mechanical Properties of Thoria ............... 65 B. Szupunar and J. Szpunar

    Characterization of the Crystallographic Textures and Mechanical Anisotropy Factors in Two Modifications of Zr-2.5Nb Pressure Tube Materials..................................................................................... 71 R. Fong, S. Vogel, R. Miller, and H. Saari

    Dispersion Characteristics of PAA (Polyacrylic Acid) for Tube Fouling Control in Nuclear Power Plant.............................................. 79 Y. Maeng, K. Kim, H. Kwon, K. Seong, and H. Yang

    Hydrogen Storage Performances of Mg20NI10-xMx (M=Cu, Co, Mn; X=0-4) Alloys Prepared by Melt Spinning.......................................... 85 D. Zhao, T. Zhai, T. Yang, Y. Lin, and Y. Zhang

    Evidence for Existence and Generality of Competitive Reactions during Hydrogenation of Mg/Cu Superlaminate Composites.............. 95 K. Tanaka, H. Takeshita, K. Shibata, Y. Nishida, K. Kurumatani, H. Miyamura, and S. Kikuchi

    Torrefaction of Yacon and Jerusalem Artichoke Stems as a Contribution to the Alternative Production of Inulin......................... 103 V. Vesely, J. Sobek, J. Hanika, and M. Puncochar

    Poster Session

    Charpy Impacty Properties of ODS Ferritic Steels............................ 111 S. Ukai, W. Izawa, N. Oono, S. Hayashi, T. Sakamura, Y. Kohno, S. Ohtsuka, and T. Kaito

    Corrosion Problems in Heat Recovery for Water Heating ................ 119 E. Posada

    Diffusion Bonding of W/ODS Steel Using Pure Iron Insert for Fusion Reactor Applications.............................................................. 129 H. Noto, S. Taniguchi, H. Kurishita, S. Matsuo, and A. Kimura

    Durability and Cycling Stability of Copper Coated Titania Nanotube as Anode Materials for Li-Ion Battery .............................. 137 S. Kim, H. Eom, and S. Choi

  • vii

    Effect of Microstructure on Hydrogen Absorption Property in Hypereutectic Mg-31mass%Ni Hydrogen Absorption Alloy ............ 143 H. Saitoh and M. Kondo

    Hierarchical ZnO Nano-Tree Growth for High Efficiency Solar Cell .................................................................................................... 149 S. Ko and C. Grigoropoulos

    Investigation on Co-Combustion Kinetics of Anthracite Coal and Biomass Char by Thermogravimetric Analysis ................................. 155 G. Wang, J. Zhang, T. Xu, J. Shao, Z. Hu, and J. Qiu

    Investigation on Corrosion Behavior of High-Level Waste Container Materials ........................................................................... 167 Q. Xu, W. Wang, X. Pang, Q. Liu, and K. Gao

    Microstructure and Properties of Nano-Structured 9CR Oxide Dispersion Strengthened Steels Produced by Atomization and Hot Isostatic Pressing ............................................................................... 181 R. Xie, Z. Lu, and C. Liu

    Renewable Thermoenergetic Resources in the Pyrometallurgical Copper Production Process................................................................ 189 M. Cirkovic, M. Mitovski, V. Trujic, A. Mitovski, and M. Bugarin

    Study on Super Stable All-Solid-State Battery at High Temperature....................................................................................... 197 S. Lee, S. Jee, and Y. Yoon

    Study on the Combustion Characteristics and Kinetics of Pulverized Coal in High Oxygen-Enriched Condition ........................................ 203 J. Shao, J. Zhang, Q. Tang, G. Wang, R. Mao, and H. Sun

    The Preparation and Electrochemical Performances of Al-Si/C Nanocomposite Anode for Lithium Ion Battery ................................ 213 H. Kim, K. Tulugan, F. Xue, C. Liu, X. Dong, and W. Park

    Thermodynamic Evaluation for Formation of MgCu2 from MgH2 and Cu................................................................................................ 221 K. Shibata, K. Tanaka, K. Kurumatani, Y. Nishida, and H. Takeshita

  • viii

    Symposium B. Materials for the Environment

    Removing Pollutants from Water, Solar Energy

    Synthesis and Antibacterial Properties of Silver and Copper Ions Against Escherichia Coli, Salmonella Typhimurium, Staphylococcus Aureus and Pseudomonas Aeruginosa..................... 229 G. Shim, H. Eom, and S. Choi

    Interaction of Tourmaline Mineral Powders with