process flow improvement using value stream...
TRANSCRIPT
PROCESS FLOW IMPROVEMENT USING VALUE
STREAM MAPPING TO REDUCE WASTE AND LEAD
TIME IN MALAYSIA HEALTHCARE
SITI HAIZATUL AISHAH BT HARON
UNIVERSITI TUN HUSSEIN ONN MALAYSIA
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
PROCESS FLOW IMPROVEMENT USING VALUE STREAM MAPPING TO
REDUCE WASTE AND LEAD TIME IN MALAYSIA HEALTHCARE
SITI HAIZATUL AISHAH BT HARON
A thesis submitted in
fulfilment of the requirement for the award of the
Degree of Master of Science in Technology Management
Faculty of Technology Management and Business
Universiti Tun Hussein Onn Malaysia
FEBRUARY 2017
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
iii
DEDICATION
I dedicate this thesis to
Almighty ALLAH S.W.T,
My father (Haron Bin Mohd Saad), my mother (Zainah Binti Buang) and
siblings,
For your love, care and encouragement.
My supervisor and co-supervisor,
For your help, encouragement and guidance to ensure the success of this thesis.
Friends,
For your help, encouragement, helped me through, make me feel like I am not alone,
may Allah ease their journey and never give up.
And everyone who involves directly and indirectly in the process of completing
this thesis.
Thank you.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
iv
ACKNOWLEDGEMENTS
All praise to God, the Greatest that gives perfection and facility in applying all tasks
and responsibilities.
I would like to acknowledge the generous contribution of individuals and
organisations to this research, without them this research would not have been
successfully completed.
First and foremost, I would like to express my gratitude to my supervisor, Puan
Rohaizan Binti Ramlan, my co-supervisor, Dr Kamilah Binti Ahmad, and lecturer,
Dr Ahmad Aizat Bin Ahmad for providing me with invaluable guidance, inspiration,
encouragement for my research and for being a mentor and supporter with their
constant inspiration.
I would also like to express my gratitude to Office of Research, Innovation,
Commercialisation and Consultancy (ORICC), UTHM, for supporting this research
under the Exploratory Research Grant Scheme (ERGS), Vot E045. I would also like
to thank organisations, which participated in this research.
Finally, I would like to thank my parents, siblings and friends for all the love,
understanding, and encouragement throughout the research period.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
v
ABSTRACT
The implementation of Value Stream Mapping (VSM) method in healthcare
institutions has started since the 1990s, mainly to fulfill the current need for an
improved quality and efficiency in delivering services. However, the application of
VSM in Malaysia healthcare institutions is still at an early stage. These institutions
are under pressure to improve service quality and costs. Most of the healthcare
institutions are facing an issue regarding long waiting time. Therefore, the intentions
of this study are to investigate any process improvement that is currently being
practiced by Healthcare Industry within Malaysia and reduce the waste and lead time
in the process flow of patient by using VSM. VSM is one of the lean tools that can be
used for process improvement in reducing both waste and lead time. Furthermore,
VSM strengthens the analysis and provides clearer vision and plans by connecting all
improvement methods in one figure. The study implemented a mixed method which
includes distribution of questionnaires to explore the current practices on process
improvement and observation process in order to reduce waste and also the lead
time. The questionnaires were distributed to 141 respondents from the management
team of healthcare industry in Malaysia. This study received 34% feedback through
the survey of quantitative data. Results from quantitative data analysis shows that
currently, 5S is the most applied process improvement practice in Malaysia
healthcare industry. The results from the qualitative data showed that the waste and
lead time in the process flow of patient are successfully reduced. The findings
proposed that the healthcare should combine the process of registration with the
blood and urine tests into one process, and also combine the process of check-up
with the process of treatment. The number of staff remains the same. This study also
suggests for the health centre to relocate the filing shelves to facilitate easier staff
access, reorganize the layout of the clinic and relocate the room according to the
process. These suggestions will improve the total lead time and reduced the cycle
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
vi
time and waste in the process flow for patient. The result of this study is significant
for other healthcare as well who are looking for further insight to implement VSM in
their process flow, and intended to reduce the waste occurred within their healthcare.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
vii
ABSTRAK
Perlaksanaan kaedah Peta Aliran Nilai (VSM) di dalam institusi kesihatan telah
bermula sejak tahun 1990-an, terutamanya untuk memenuhi keperluan semasa bagi
meningkatkan kualiti dan kelancaran dalam menyampaikan servis. Walau
bagaimanapun, perlaksanaan VSM di institusi penjagaan kesihatan Malaysia adalah
masih di peringkat awal. Institusi-institusi ini menghadapi tekanan untuk
memperbaiki kualiti servis dan juga kos. Kebanyakan pusat kesihatan menghadapi
isu berkaitan masa menunggu yang lama. Oleh itu, tujuan kajian ini adalah untuk
mengkaji proses penambahbaikan semasa yang digunakan di dalam industri
penjagaan kesihatan Malaysia serta mengurangkan waste dan masa di dalam carta
aliran proses untuk pesakit dengan menggunakan VSM. VSM adalah salah satu
alatan lean yang boleh digunakan untuk proses penambahbaikan dalam
mengurangkan kedua-dua waste dan masa. Tambahan pula, VSM dapat
mengukuhkan analisis dan memberikan gambaran dan rancangan yang lebih jelas
dengan menyatukan semua kaedah penambahbaikan dalam satu rajah. Kajian ini
dilaksanakan dengan menggunakan kaedah campuran yang merangkumi pengedaran
borang soal selidik untuk mengkaji amalan semasa bagi proses penambahbaikan dan
proses pemerhatian untuk mengurangkan waste dan masa. Borang kaji selidik telah
diedarkan kepada 141 responden yang terdiri daripada pasukan pengurusan industri
penjagaan kesihatan di Malaysia. Kajian ini menerima 34% maklum balas melalui
hasil kajian data kuantitatif. Keputusan daripada analisis data kuantitatif
menunjukkan bahawa 5S merupakan proses penambahbaikan yang paling kerap
digunakan di dalam industri penjagaan kesihatan Malaysia. Keputusan bagi data
kualitatif kajian ini menunjukkan waste dan masa dalam aliran proses untuk pesakit
telah berjaya dikurangkan. Hasil daripada dapatan kajian mencadangkan supaya
pusat kesihatan perlu menggabungkan proses pendaftaran dengan proses ujian darah
dan air kencing dalam satu proses, serta menggabungkan proses pemeriksaan dan
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
viii
proses rawatan. Jumlah kakitangan bagi setiap proses adalah masih sama. Kajian ini
turut mencadangkan supaya pusat kesihatan mengubah posisi rak penyimpanan
dokumen bagi memudahkan kakitangan mengakses fail/dokumen, mengubah susun
atur klinik serta megubah kedudukan bilik mengikut proses. Kesemua cadangan ini
akan memperbaiki jumlah masa dan mengurangkan kitaran masa dan waste pada
proses aliran pesakit. Hasil daripada kajian ini adalah penting bagi pusat kesihatan
lain yang mencari gambaran untuk melaksanakan VSM di dalam aliran process
mereka, serta ingin mengurangkan bilangan waste yang berlaku di dalam pusat
kesihatan mereka.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
ix
TABLE OF CONTENTS
TITLE i
DECLARATION ii
DEDICATION iii
ACKNOWLEDGEMENT iv
ABSTRACT v
ABSTRAK vi
TABLE OF CONTENTS ix
LIST OF TABLES xiii
LIST OF FIGURES xiv
LIST OF ACRONYMS /ABBREVIATIONS xvii
APPENDIXES
CHAPTER 1 INTRODUCTION 1
1.1 Introduction 1
1.2 Research Background 3
1.3 Problem Statement 6
1.4 Research Questions 10
1.5 Research Objectives 11
1.6 Scope of Research 11
1.7 Significance of Research 12
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
x
1.8 Thesis structure 13
1.9 Conclusion 14
CHAPTER 2 LITERATURE REVIEW 15
2.1 Introduction 15
2.2 Healthcare 15
2.2.1 Healthcare in developing countries 16
2.2.2 Healthcare in Malaysia 17
2.3 Process Improvement 20
2.3.1 Previous studies of process improvement in
healthcare
21
2.3.2 Six Sigma 23
2.3.2.1 Six Sigma in Healthcare 25
2.3.3 Lean 26
2.3.3.1 Lean in healthcare 27
2.4 Value Stream Mapping 28
2.4.1 Sections of Value Stream Mapping 29
2.4.2 General terminology used in Value Stream
Mapping
30
2.4.3 Eight wastes of lean 31
2.4.4 Previous Studies on Value Stream Mapping
in Healthcare
32
2.5 Research Flow of Value Stream Mapping 39
2.6 Conclusion 41
CHAPTER 3 RESEARCH METHODOLOGY 42
3.1 Introduction 42
3.2 Research Purpose 43
3.3 Research Design 44
3.4 Quantitative Research Design 46
3.4.1 Population and Data Collection
(Quantitative)
46
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
xi
3.4.2 Questionnaire Design 48
3.4.3 Structure of Questionnaire 48
3.5 Qualitative Research Design 49
3.5.1 Observation 49
3.5.2 Population and Data Collection
(Qualitative)
49
3.5.3 Data Analysis Instrument (Qualitative) 50
3.6 Conclusion 52
CHAPTER 4 DATA ANALYSIS 53
4.1 Introduction 53
4.2 Quantitative Data Analysis 53
4.2.1 Type of respondent and length of experience 54
4.2.2 Introduction of process improvement in
healthcare
60
4.2.3 Current practices of process improvement
within Malaysian healthcare industry
63
4.2.4 Identification of issues while implementing
process improvement
67
4.2.5 Overall support on process improvement
within healthcare
68
4.3 Qualitative Data Analysis 70
4.3.1 Development of Value Stream Mapping
(VSM) in healthcare.
73
4.3.1.1 Process flow of the mapping 75
4.3.1.2 Current state map 78
4.3.1.3 Value Added Time and Non-Value added
Time
80
4.3.1.4 Calculation of TAKT Time, Cycle Time and
Value Added Time.
81
4.3.1.5 Waste 85
4.3.1.6 Data of the current state 93
4.3.1.7 Future State Map 96
4.3.1.8 Comparison of data between the Current 105
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
xii
State and Future State
4.4 Conclusion 107
CHAPTER 5 CONCLUSION 109
5.1 Introduction 109
5.2 Discussion of the result attained for research
questions.
110
5.2.1 Research Question 1 110
5.2.2 Research Question 2 112
5.2.3 Research Question 3 114
5.3 Contribution of research 115
5.4 Limitation of research 117
5.5 Recommendations for further research 117
5.6 Conclusions 118
REFERENCES 119
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
xiii
LIST OF TABLES
1.1 Admissions and outpatients attendances in 2013 9
2.1 Trend for Total Health Expenditure, 1997-2011 (RM
Million & Percent GDP)
19
2.2 Previous studies of process improvement in healthcare 22
2.3 Previous Studies of Value Stream Mapping in
Healthcare
32
3.1 Questionnaire distributions method and respond rate 47
3.2 Type of question design 48
4.1 The gender of the respondent 54
4.2 The age of the respondent 55
4.3 Familiarity with Process Improvement 56
4.4 Length of experience working with process
improvement
57
4.5 Respondent’s department of work. 59
4.6 Introduction of process improvement in healthcare 61
4.7 Formal training on process improvement within
healthcare
62
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
xiv
4.8 Process Improvement tools applied within healthcare 64
4.9 Obstacles while implementing process improvement in
healthcare.
67
4.10 Level of support while implementing process
improvement in healthcare.
69
4.11 Legend for Figure 4.11 71
4.12 Table of data collection from observation (refer Figure
4.11).
72
4.13 The symbol and definition for Figure 4.14. 77
4.14 Comparison of TAKT time between morning session
and whole day session
82
4.15 The comparison of TAKT time for each process
between morning session and whole day session in the
healthcare.
83
4.16 The related time for each process 83
4.17 Observation during the process of registration 86
4.18 Observation during the process of blood and urine test 88
4.19 Observation during the process of check-up 90
4.20 Observation during the process of treatment 92
4.21 Calculated data from the current state 94
4.22 Proposed data for future state map 97
4.23 The comparison in performance between the current 105
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
xv
state and future state
5.1 The comparison in performance between the current
state and future state
115
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
xvi
LIST OF FIGURES
1.1 Malaysian Health Budget Allocation from 2010-2016. 2
1.2 Trends for Total Health Expenditure 1997-2013 5
2.1 Research flow of study 40
3.1 Research design through mixed methods approach 45
3.2 Process flow of VSM for this study 51
4.1 The gender of respondent 55
4.2 The age of respondent 56
4.3 Familiarity with Process Improvement 57
4.4 Length of experience working with process
improvement
59
4.5 The respondent’s department of work 60
4.6 Introduction of process improvement in healthcare 62
4.7 Formal training on process improvement within
healthcare
63
4.8 Process Improvement tools applied within healthcare 66
4.9 Issues while implementing process improvement in 68
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
xvii
healthcare
4.10 Level of support while implementing process
improvement in healthcare
69
4.11 Figure for table of data collection in Table 4.12 71
4.12 The process of implementing VSM 74
4.13 Process flowchart of patient 76
4.14 The movement of patient 77
4.15 Current State Map 79
4.16 The total lead time 81
4.17 The comparison chart between TAKT time, cycle time
and value added time for morning session in the
healthcare (current state of VSM)
85
4.18 The idle time in each process 95
4.19 The capacity of patient in each process per day 96
4.20 Comparison of cycle time during current state and
future state for the process of registration and the
process of blood and urine test
98
4.21 Comparison of cycle time during current state and
future state for the process of check-up and the process
of treatment
99
4.22 Comparison of the total lead time during current state
and future state.
101
4.23 Comparison of the value added time during current
state and future state
101
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
xviii
4.24 Comparison of the non-value added time during current
state and future
state.
102
4.25 Future State Map 103
4.26 Process flowchart of patient for future state 104
4.27 The data of value added time for future state after VSM 107
5.1 The waiting time of patient for each process 113
5.2 The waiting time for each patient (min) 113
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
xix
LIST OF ACRONYMS /ABBREVIATIONS
CQI - Continuous Quality Improvement
DES - discrete-event simulation
DMAIC - Define, Measure, Analyze, Improve, Control
EPU - Economic Planning Unit
GDP - Gross Domestic Product
LMI - Lean Management Initiatives
MHTC - Malaysia Healthcare Travel Council
MoH - Ministry of Health
RFID - Radio frequency identification
SSI - Six Sigma Initiatives
VSM - Value Stream Mapping
VA - Value Added
NVA - Non-Value Added
C/T - Cycle Time
C/O - Change Over Time
SIPOC - Supliers, Inputs, Process, Outputs, Customers
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
xx
LIST OF APPENDICES
Table of data collection from observation
Survey Questions
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
1
CHAPTER 1
INTRODUCTION
1.1 Introduction
Malaysia has been listed as one of the developing countries that are successful in various
fields. Malaysia is one of the developing countries listed by the World Bank in a group
category of upper-middle-income economies with the range of $4,086 to $12,615.
Malaysia has enjoyed economic growth and underwent major development programmes
aiming to be a fully developed nation by 2020. In order to achieve the target as a
successful nation, lots of action/programmes had been done in various fields such as
economy, technology, social, cultural, spiritual, and more. Malaysian Plan is one of the
steps taken to achieve the target for a better Malaysia in the future that includes services,
manufacturing, agriculture, mining, construction and others. Health industry is included
under the service sector as stated in the first Malaysian Plan.
Since the first Malaysian Plan, the Ministry of Health had introduced various
health programmes to improve patient’s safety and the population’s health. The Health
Plan which has been detailed out in 10th Malaysian Plan 2011-2015 aims to improve the
country’s healthcare system based on the concept of ―1 Care for 1 Malaysia‖. This 1
Care is a structured national health system that is responsive and provides choice
in quality healthcare, ensuring universal coverage for the population’s healthcare needs
based on solidarity and equity. This Health Plan was formulated based on a deep
understanding on the needs and challenges, the government’s ability to finance it, and
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
2
value for money. It was developed to reflect the aspirations in achieving a high-income
country status by 2020 (MoH, 2010). Since Malaysia is categorized in a group of upper-
middle-income economies with the range of $4,086 to $12,615 which is considered high,
citizens are experiencing the consequences where it involves the rise in hospitalisation,
institutional care and health insurance costs (Malaysia Economic Planning Unit, 2010).
The major issues that have been discussed in Malaysian Health Plan 2011-2015
are regarding the increase in healthcare costs. From the report, it was stated that the
rising cost of care is due to several factors which are inefficiency, increasing demand for
health services in institutions and also wasted resources (MoH, 2010). Besides, there are
five cost drivers that had been mentioned which are wealth, epidemiological transition,
facing emerging/re-emerging infectious diseases, demographic transition and lastly,
technology (MoH, 2010). Other than the aim to maintain the low cost, the healthcare
sector also needs to meet the goals in providing care and enhancing health (Dahlgaard,
Pettersen, & Dahlgaard-Park, 2011). According to the previous reports, it were
mentioned that the allocation budget for Malaysian Health increased each year since
2010 until 2016 except 2011 and 2016 where the amount slightly decreased. Figure 1.1
summarise the data for Malaysian health budget allocation from 2010 until 2016.
Figure 1.1 Malaysian Health Budget Allocation from 2010-2016.
15.3 15.2
16.9
19.3
22.1
23.3
23
0
5
10
15
20
25
2010 2011 2012 2013 2014 2015 2016
Malaysian Health Budget Allocation
budget allocation (RM
Billion)
billion PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
3
On the other hand, to complement the continuous growth of Malaysian
healthcare, the research organizations are required to study the cost-effectiveness and
performance measurement during the implementation of 10th Malaysia Plan. Therefore,
it is important for the management to fully utilise available process improvement for
healthcare in order to curb the hardship issues from mushrooming. The process
improvement methodologies such as Lean and Six Sigma have tremendously improved
the quality and efficiency of manufacturing and service sectors for decades (Antony,
Krishnan, Cullen, & Kumar, 2012).
Process improvement method has been widely used around the world in
improving the operation of an organization (Abdulmalek & Rajgopal, 2007; Mujtaba,
Feldt & Petersen, 2010; Shahrbabaki & Jackson, 2011). Value Stream Mapping is one of
the process improvement tools that has been tremendously used in healthcare (Castle &
Harvey, 2009; Nelson-Peterson & Leppa, 2007; Puterman et al., 2012). However, the
implementation of Value Stream Mapping (VSM) in Malaysian healthcare industry is
still low. In fact, the result obtained from the preliminary study showed that VSM is one
of the process improvement tools that has not been used by respondents of the study.
Therefore, this research aims to study the current practice of process improvement in
Malaysian Healthcare to the extent of implementing the VSM in the process flow of
patient in healthcare.
1.2 Research Background
Healthcare industries are experiencing an extremely challenging situation in
maintaining a competitive edge. In recent years, the healthcare providers for example in
Malaysia are under a great deal of pressure to improve the quality of services as well as
costs. This is due to the growing number of population and greater expectation for
healthcare services in Malaysia. The Malaysian government has shown its commitment
to improve the country’s healthcare system as detailed out in The Health Plan under the
10th Malaysian Plan 2011-2015. In fact, the government had introduced various health
programmes to improve patients’ safety and the population’s health since the first
Malaysian Plan (1966-1970). In 2014, the Malaysian government had allocated RM22.1
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
4
billion, in order to minimise any possible gap in priorities area for the health sector
which includes operation and development expenses (MoH, 2013). The budget
allocation for health had been increased in 2015, where the Malaysian government had
allocated about RM23.3 billion. In Malaysia, the public healthcare sector is heavily
subsidised by the Malaysian government which is almost 90 percent of the total cost and
the patient pays a minimum amount for treatment.
Healthcare providers in Malaysia has been urged to transform the way they
deliver their service to improve the quality in order to meet the Millennium
Development Goals and the Malaysian Health Plan which has been set by the Malaysian
government. Malaysia needs to restructure the national healthcare financing and
healthcare delivery system, for example by using process improvement method in order
to achieve the target (MoH, 2010). In October 2011, the Malaysian Healthcare Travel
Council (MHTC) was corporatised to develop and promote Malaysia as the main
destination for healthcare services in the region. As stated in Health Expenditure Report
1997-2011, Malaysia had recorded 3.9% GDP in health spending which was similar to
other countries in Asia such as The Philippines, Thailand, India and Bangladesh. While
in 2015, it recorded 4.3% spending in GDP on healthcare. However, these countries
have much lower spending capita compared to Malaysia which ranging from USD67 in
Bangladesh to USD353 in Thailand, while in Malaysia spending was USD616 per
capita. According to Malaysia National Health Account database 2013, Malaysian
Healthcare spending continues to grow at about 12% rate on average per year for the
past 15 years. As reported in MNHA Health Expenditure Report (2015), the trend for
total health expenditure keeps on increasing since 1997 until 2013. Figure 1.2 shows the
data of escalating total health expenditure for 1997-2013.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
5
Figure 1.2 Trends for Total Health Expenditure 1997-2013
(Source: Malaysia, & Malaysia National Health Account Unit, 2015)
The implementation of process improvement or change management in
healthcare has started for decades. This method manages to save operational costs where
available resources were used diligently in delivering continuous healthcare services
across the programmes, healthcare settings and also healthcare providers (Gill, 2012).
The advantages of applying process improvement method in an organization have also
been mentioned in previous studies (Celano, Costa, Fichera & Tringali, 2012;
Liberatore, 2013; Southard, Chandra, & Kumar, 2012).
Lean and Six Sigma are tools that have been used and evolved in healthcare for
the process and operations efficiency improvement, as well as financial concern in
healthcare delivery (Gamal, 2010; Revere, Black & Huq, 2004; Rohini & Mallikarjun,
2011). Six Sigma is a method that helps to identify problems on medical errors, quality
and costs improvements (Revere et al., 2004; Taner, Sezen, Antony, 2007). Lean is well-
known as the best tool for removing waste and related lead time reduction in process and
operations. Previous researchers suggest than lean can be described as a medium to
0
5000
10000
15000
20000
25000
30000
35000
40000
45000
1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013
8303 8964 9837 11707
12990 14187
17931 19234
19487
23802
26144
29150
31453
36646 38830
42347
44748
Total Health Expenditure, Nominal (RM Million)
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
6
reduce waiting time, repeated visits, errors and inappropriate procedures, enhance the
process steps that are valuable and crucial, standardize the process flow, eliminate non-
value added activities and even make the value streams be more noticeable (Arumugam,
Antony & Douglas, 2012; Langabeer, Dellifraine, Heineke & Abbas, 2009; Wan &
Chen , 2008).
Lean in healthcare was known as lean healthcare where it is an improvement
system that systematically amends the cost, quality, and safety issues incurred in
healthcare. Lean healthcare helps the healthcare organization to reduce waste and cost,
as well as improving the quality and safety of healthcare (Lowe, 2013). The process of
removing waste and reducing the lead time in healthcare can be done through process
mapping or Value Stream Mapping (VSM) (Gill, 2012). VSM can be defined as the
representation of value stream with symbols and numbers, as the key to understand the
entire transformation of raw materials into finished goods (Nielsen, 2008). VSM was
chosen in the past researches as one of the preferred tools to detect the transactional and
communication mismatches, process inefficiencies and also for improvement (Gill,
2012). Previous scholars have conducted studies on VSM in different settings (Cookson,
Read & Cooke, 2011; Lowe, 2013; Persoon, Zaleski & Frerichs, 2006). However most
of the studies focus on the VSM implementation in service industries.
1.3 Problem Statement
Healthcare sectors in Malaysia have changed and growing since the early 90’s. The
changes such as demographics, political environment, social perceptions of healthcare
quality and information technology have led to dramatic change in the healthcare sector
(Trusko, Pexton, Gupta & Harrington, 2003). The advancement in healthcare sector
progress is in line with the developing countries growth (Cheong, Shin & Joeng, 2009).
New issues and challenges are faced as Malaysian healthcare sector develops. Among
major issues identified throughout healthcare delivery are increasing healthcare costs,
service and quality performances and also the efficiency of processes and operations
(Shazali, Habidin, Ali, Khaidir & Jamaludin, 2013). Rising costs in healthcare are due to
several factors namely escalating health expenditure which includes medical care,
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
7
consultations, medication, medical procedures and other factors (Gowen, McFadden &
Settaluri, 2012; Olszak & Batko, 2012). Besides, the increasing costs are also due to the
increasing number of population size where it leads to the rise in demand for healthcare
services.
Over the years, service performance has become one of the target issues that
need to be emphasized by the healthcare management. This is because the aim of
providing care and enhancing health towards the citizen, have become the national goal
and focus that need to be achieved (Dahlgaard et al., 2011). Poor healthcare delivery
system and crisis in management are among the factors that will affect the overall
healthcare quality. The focus on restructuring the national healthcare financing and
healthcare delivery system are by adopting process improvement method where it is
relevant and significant to fulfil the aspiration in achieving the target of creating an
effective, efficient, fair and high-tech system of healthcare as well as responsiveness
where it can further improve the access to various levels of appropriate healthcare to all
Malaysian citizen (MoH, 2010).
However, there is a lack of evidence on the current state for type of process
improvement used by the Malaysian Healthcare providers (Khaidir, Habidin, Ali,
Shazali & Jamaludin, 2013). Lack of knowledge in this area may prevent the policy
makers and top management of healthcare providers to understand the necessary
continuous improvement approaches in healthcare systems and their impact on the
quality of services. It should be the main priority for healthcare’s higher management to
find ways to be more efficient and effective in delivering services. Therefore, this study
attempts to investigate the current practices of process improvement approaches in
Malaysian healthcare.
Lean and Six Sigma are two popular continuous process improvement methods.
These methods had tremendously improved the quality and efficiency of manufacturing
and service sectors for decades (Laureani & Antony, 2012). Lean and Six Sigma has
also been applied to healthcare delivery system as a solution to problems that occur
within healthcare industry (Celano et al., 2012; Willoughby, Chan & Strenger, 2010). As
clarified in a study by Laureani and Antony (2012), there is a small number of previous
empirical studies aimed to understand the benefits of Lean and Six Sigma methodologies
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
8
in improving clinical outcomes, patient safety, efficiency, and financial performance.
Organization that utilized Lean methodology alone with the absence of Six Sigma shows
restricted improvement across organization. Indeed, by integrating the best approach of
Lean and Six Sigma methodologies, the organization will magnify improvements in
customer satisfaction, cost, quality, speed and others (Laureani & Antony, 2012).
Lean specifically has been recognized as one of the methods for removing waste
and reducing lead time. Lean is an alternative of doing more with less where it focuses
on eliminating non-value added activities and to increase the efficiency of activities. In
previous researches, lean has been widely used as a waste removal and lead time reducer
for productions, processes and operations (Murrel, Offerman & Kauffman, 2011). The
long waiting time has become one of the major issues that burdens healthcare
management and patients (Kollberg, Dahlgaard & Brehmer, 2006). This issue requires a
solution to curb the problem from further escalating. The combination of lean and Six
Sigma known as Lean Sigma, is able to develop forceful recognition and reduce the non-
value added activities in a workflow process (Bahensky, Roe & Bolton, 2005).
The issues regarding waste and long waiting time in previous studies had been
solved by implementing Value Stream Mapping (Cadro, 2013; Rahani & al-Ashraf,
2012; Tyagi, Choudhary, Cai & Yang, 2015). In Malaysia, there is still lack of studies
regarding the implementation of VSM in Malaysian Healthcare as process improvement
tool (Haron, Ramlan, Ahmad & Ahmad, 2015). Referring to this situation, this study
attempts to utilize the VSM approach in finding a better solution for improving lead time
and the patient process flow in healthcare systems.
The preliminary study on the particular healthcare shows that there is waste issue
occurrence (Haron & Ramlan, 2015). However, the waste here is waiting time only.
From the study, non-value added time that is considered as waste (waiting time), is
greater than the value added time. The study proposed a few solutions to reduce the
waste occurrence and successfully improved the process flow of patient.
In Malaysia, the number of admissions has been increasing by 3% annually
(MoH, 2010). Given the growing number of demand especially for outpatient services,
the healthcare systems is now facing longer and increasing waiting times for medical
services. Based on the statistics from Ministry of Health Malaysia, the recorded number
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
9
of admissions and outpatients’ attendances in 2013 is in Table 1.1. This situation may
have slight medical effect, but excessive waiting time may be detrimental to the patients'
health. This situation may be worse in a larger public healthcare centre where the
demand for outpatient medical services is generally higher than in the private sector.
Table 1.1: Admissions and outpatients attendances in 2013
Government
Ministry of Health
Admissions total
Hospitals 2,110,628 2,163,082
Special Medical Institutions 52,454
Outpatient Attendances
Hospitals 19,353,222 53,000,929
Special Medical Institutions 268,104
Public Health Facilities 33,379,603
Day Care Attendances
Hospitals 1,189,409 1,189,409
Clinical Support Service Attendances
Medical Rehabilitation (Hearing) 92,109 359,831
Medical Rehabilitation (Speech) 44,508
Medical Social Services 83,495
Dietetic 139,719
Dental Health Attendances
Dental Clinics 10,984,728 10,984,728
Maternal & Child Health Attendances
Ante-natal Attendances 5,794,544 14,067,279
Post-natal attendances 556,852
Child Attendances 7,715,883
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
10
Table 1.1 (continued)
Non Ministry of Health Hospitals
Admissions 139,545 2,141,075
Outpatient Attendances 2,001,530
Private Hospitals
Admissions 1,020,397 4,888,065
Outpatient Attendances 3,867,668
(Source: MoH, 2015)
As shown in Table 1.1, the patient attendances in 2013 for Maternal & Child
Health Attendances shows the highest number except for Outpatient Attendances
compared to other department with a total of 14,067,279 attending patients. The high
number of attending patients in Maternal & Child Health Attendances will increase the
probability of long waiting time. This is the reason why maternity clinic being selected
as the location for this study. Thus, this research aims to study the issues in selected
maternity clinic because it is important to determine the most critical waste and propose
a solution on how to eliminate or reduce wastes that occur during the process flow of
patient.
1.4 Research Questions
Based on the problem statement discussed before, there are three research questions
which are:
i. What are the current practices of process improvement method in Malaysian
Healthcare industry?
ii. What is the most critical waste that occur during the process flow of patient in
healthcare?
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
11
iii. What can be suggested to eliminate or reduce the wastes that occur during the
process flow of patient in healthcare systems?
1.5 Research Objectives
According to the research questions, there are three objectives to be accomplished:
i. To investigate the current practices of process improvement method within
Malaysian Healthcare Industry.
ii. To determine the most critical wastes that occurs during the process flow of
patient in healthcare.
iii. To propose a solution on how to eliminate or reduce wastes that occurs during
the process flow of patient in healthcare.
1.6 Scope of Research
This research was conducted within the Malaysian healthcare industry and this research
was divided into two scopes. The first scope focuses on Malaysian healthcare where it
covers the first objective of this study. The target respondents are healthcare
professionals who work in healthcare. The second scope is government health clinic in
Parit Raja, Batu Pahat where it covers the second and third objectives for this study. This
research focused on lean healthcare and Value Stream Mapping (VSM) in the process
flow of patient. Observation was done in order to monitor the process flow of patient
without interrupting the staffs in the selected healthcare. Potential solutions are proposed
to the healthcare in order to improve the process flow of patient and eliminate waste. In
this study, the maternity clinic was selected because pregnancy, childbirth, and the
puerperium have been recorded as the number one cause of hospitalization in Ministry
of Health and private hospitals in 2013.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
12
1.7 Significance of Research
This study investigates the current practices of process improvement in Malaysian
Healthcare Industry. Six Sigma and lean are necessary for organizations in order to
move to the next level in business achievement (Black & Revere, 2006; Gowen et al.,
2012). Through Six Sigma and lean methodology, organization will be able to identify
problems, improve the efficiency of task, review customer satisfaction, and also attain
strategic objectives. Lean healthcare is a method that has been applied in healthcare
organization as a crucial method for improvement and Value Stream Mapping (VSM) is
a tool used to improve the delivery of service in process flow of patient. By proposing
the implementation of VSM in healthcare, it will help the healthcare to:
1. Reduce errors where it will result in enhancing the patient satisfaction (Gowen et
al., 2012; Langabeer et al., 2009; Lummus, Vokurka & Rodeghiero, 2006).
2. Remove waste in the system of healthcare delivery as waste will become
restriction to performance and most of the non-value added activities will be
eliminated (Lummus et al., 2006).
3. Improve the process flow of patient where it will reduce the lead time and
increase the efficiency of process and operations (Lummus et al., 2006).
Moreover, this study contributes to the development of methodology used in
conducting the research. Data for this study was collected using structured questionnaire
and observation in order to achieve the research objectives. Mixed methodology was
used in order to ensure that the data matches the need of the study (Saunders, Lewis &
Thornhill, 2009). A mixed method approach contributes in maximizing the usage of
qualitative and quantitative approaches, provides a sophisticated and complex approach
for the study, and as a useful strategy to have a complete understanding of the research
problems (Creswell, 2014).
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
13
Finally, this study will contribute to scholarly literatures and academic
knowledge between the healthcare industry and process improvement method. The
development of healthcare industry and process improvement are essential to the growth
of the nation, and the healthcare providers in Malaysia had been urged to transform the
way they deliver their services in order to meet the goal and objectives of the health plan
that had been detailed out in 10th Malaysia Plan 2011-2015.
1.8 Thesis structure
In general, the thesis structure is as follows:
i. Chapter 1
This chapter consists of an overview for this study. It includes introduction of
this research, research background, problem statement, research questions,
research objectives, scope of research, and significance of research.
ii. Chapter 2
In this chapter, literature review from previous study that is related to this
research had been discussed. The literature review will include the explanation
from previous studies starting with healthcare, healthcare in developing
countries, and healthcare in Malaysia. Next is literature review of process
improvement, where it explains the definition, including tools and function of
process improvement, as well as the advantages of implementing each of process
improvement. Lastly, literature review of Value Stream Mapping (VSM) is
included in this chapter followed by the research flow of VMS used in this study.
iii. Chapter 3
This chapter discusses the methodology used in order to accomplish the aim of
this study. The techniques use answers to the research questions and achieve the
objectives of this research. This chapter covers research purpose, research design
(quantitative and qualitative), data collection, and also research instrument used.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
14
iv. Chapter 4
Data collected from the survey was used to achieve the objective of this research.
Surveys from questionnaires and data collected through observation were
analysed and also used as input for the process of Value Stream Mapping.
v. Chapter 5
This chapter consists of discussions on the results from the research findings. It
explained all further details including the limitations encountered while
conducting this study, and also discussed the suggestions for future research.
1.9 Conclusion
This chapter discussed the introduction and issues that are related to this study. This
chapter even discussed the background of research, research objectives, scope of
research and also the significance of research. It started with healthcare, followed by the
aim of this research concerning the issue related to Malaysian Healthcare and how to
solve the related issues.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
15
CHAPTER 2
LITERATURE REVIEW
2.1 Introduction
This chapter presents an overview of process improvement in healthcare. It starts with
an exploration on the characteristics of healthcare in Malaysia and other developing
countries. As Malaysia is one of the developing countries listed by the World Bank, the
characteristics and issues related to the healthcare in developing countries were
discussed in furtherance of quality and performance. Information collected from health,
business and service management literature shows that process improvement is directly
linked to quality and performance where features, costs, and revenues were included.
The process improvement in the context of operation, business and service management
leads to the discussion of methodologies and tools with an emphasis on process
improvement in the healthcare industry.
2.2 Healthcare
Healthcare is a health institution that provides care services to patients. It is the duty of
hospital and healthcare centres to take care of the public health. Generally, healthcare
organization throughout the world can be divided into three types which are the public,
private and also the non-governmental organization. In Malaysia, healthcare is divided
into public, private, non-governmental organization, semi-government and semi-private.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
16
Globally, healthcare is one of the sectors that have witnessed significant improvement
concerning the public health and healthcare system (Abor, 2013). Most of the countries
are facing problem in managing the healthcare system due to the costs (Dahlgaard et al.,
2011; Shazali et al., 2013). The costs of healthcare are rising each year where it includes
personal healthcare spending, the net cost of insurance, public health activities by the
government, research and also construction of medical facilities (Kumar & Steinebach,
2008). Matthews (2013) argued that processes involved in healthcare delivery are crucial
to the operational success of healthcare due to impact on the medical errors, throughput,
and quality of care within the system. The sources of medical errors in healthcare are
related to communication, systems and the failure of culture (Garbutt et al., 2008).
2.2.1 Healthcare in developing countries
In most developing countries, healthcare organizations are continuously improving their
healthcare service delivery to the patient (Cheong, Shin & Joeng, 2009). The process
improvement is expected to generate an improvement in healthcare such as the
healthcare system, increased patients’ accessibility to medical care and satisfaction,
improvement in medical quality, reduction in costs, and business rationalization of
hospitals (MoH, 2010). In other developing countries such as Korea, the Korean
government promoted the national e-health project where the function is aimed to
systematically build an integrated healthcare system from 2004 until 2010 (Cheong et
al., 2009). E-health can be described as total reform to healthcare system since
healthcare production, supply, and management system is exchanged in a digital form.
Such innovation is also expected to improve healthcare services as a whole, reduce the
imbalance of healthcare benefit, lower the costs of healthcare and strengthen the
competitiveness of the related industry.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
17
2.2.2 Healthcare in Malaysia
In Malaysia, the healthcare system is primarily under the jurisdiction of the Ministry of
Health Malaysia. The Ministry of Health was established decades ago in order to play
the role as the regulator by enforcing the regulations. Within the ministry, the composed
health system is fair, equitable, efficient, compatible and appropriate to the customer
environment (MoH, 2013). In addition, this system was designed to satisfy the quality,
innovation, health promotion, respect for human dignity, and promote individual and
also community participation towards improving the quality of life (MoH, 2013).
Besides the Ministry of Health, university hospitals which are under the Ministry of
Higher Education are also the important providers to the public, and there is a military
hospital for military personnel and their families which fall under the Ministry of
Defence jurisdiction. Public healthcare in Malaysia was organized based on the National
Health Plan that has been drafted according to Malaysian Plan. According to the
Ministry of Finance Malaysia, healthcare services include:
a) medical, dental, nursing, midwife, allied health, pharmacy, ambulance services
and any other service provided by a healthcare professional,
b) any accommodation and food for the purpose of providing healthcare services,
c) any service for screening, diagnose, or treatment of a person suffering any
disease, injury or disability of mind and body,
d) any service for preventive or promoting health purposes,
e) any service provided by private healthcare facilities,
f) any service for curing or alleviating any abnormal condition of the human body
by application of any apparatus, equipment, instrument or device or any other
medical technology, and
g) any related healthcare service which includes the supply of drugs and medicines,
haemodialysis services and blood bank services.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
18
(Source: MoF, 2014)
Malaysia Plan is an extensive 5-year strategic plan developed by the Cabinet of
Malaysia and the Economic Planning Unit (EPU). Since the 9th Malaysia Plan, the
theme of Malaysia Health Plan focuses on achieving a better health among citizens
through consolidation of health services (MoH, 2010). In the 10th Malaysia Health Plan
period from 2011-2015, the content is still consistent with the 4th National Mission
which is an improvement to the standard and sustainability on the quality of life. Apart
from focusing on the improvement of the standard and the quality of life, the 10th
Malaysia Health Plan stressed on the quality of healthcare and aimed for a healthy
community. The plan supports a healthy lifestyle by gearing towards the establishment
of a comprehensive healthcare system, public recreation, as well as sports infrastructure.
As stated in Health Expenditure Report 1997-2011 which is reported by Malaysia
National Health Accounts, the total health expenditure in Malaysia keeps on escalating
since 1997 until 2011 as stated in Health Expenditure Report from 1997 to 2011 in Table
2.1.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
19
Table 2.1: Trend for Total Health Expenditure, 1997-2011 (RM Million & Percent GDP)
(Source: MoH, 2013)
The deliveries of public healthcare were intended to be affordable for the society
and can be readily accessed at all levels. Access to the public healthcare is direct, where
the people may enter as walk-in patients while access to the specialist is through referral.
However, access to private healthcare is based on ability of the patient to pay and it does
not require any referral. Even though the number of private healthcare has been
multiplying ever since, public healthcare is still dominating the healthcare industry as
the Ministry of Health is the largest healthcare provider in Malaysia. Malaysia health
system faces challenges due to increasing expectations from the public, changing trends
in disease patterns and socio-demography, and even fulfilling greater efficiencies
requirement by the citizens.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
20
2.3 Process Improvement
To stay competitive and sustain long-term profitability, process improvement
methodologies become strategically important for healthcare industry in recent years.
Process improvement is also known as change management in the industry. Process
improvement as defined by Stamatis (2003) is the act of changing a process to reduce
variability and cycle time and makes the process more effective, efficient, and
productive. Specifically, process improvement focuses on incremental solutions to
eliminate or reduce defects, errors, costs, or cycle time. The application of process
improvement techniques has increased in popularity especially for healthcare
(Dellifraine, Langabeer & Nembhard, 2010). This statement is supported by Lighter
(2011) where process improvement initiatives were rated by healthcare personnel as
more important and experienced more frequent improvements to resolve medical errors
and others which include patient safety, quality, employee satisfaction, efficiency and
also competitiveness. Furthermore, Koelling, Eitel, Mahapatra, Messner and Grove
(2005) stated that process improvement is an initiative to increase the operational
efficiency and cost-effectiveness of the healthcare delivery process.
The process improvement programmes also include quality groups that use
process improvement tools in order to improve the process outcomes (Gowen et al.,
2012). Moreover, Arthur (2011) mentioned that healthcare organizations have highly
taken process improvement as an effective technique for improving quality, profitability,
productivity and even competitiveness. The goals of healthcare process improvement are
to enhance the effectiveness of systems across departments while maximizing profits
and improving the quality of the patient’s experience and care. Goldstein and Iossifova
(2012) reviewed that a high degree of financial resource slack was related to successful
implementation of process improvement initiatives for reducing four adverse medical
errors. Besides that, Gowen et al. (2012) mentioned that previous healthcare research
reported on effective deployment of process improvement programmes depends on other
dynamic capabilities, such as organizational structure, hospital ownership, and
leadership style.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
21
The implementation of process improvement is associated with improved
organizational effectiveness, in terms of service quality, customer satisfaction, net cost
savings and patient satisfaction (Marley, Collier & Meyer, 2004). This is in line with the
past researchers, who argued that the healthcare organizations implemented process
improvement targeting to improve their organizational performance (Gowen et al., 2012;
Hilton, Balla & Sohal, 2008). The effectiveness and efficiency were considered as part
of organizational performance that can be enhanced by certain process improvement
factors such as DMAIC and Value Stream Mapping (De Mast, 2006). Many
organizations have implemented process improvement method and have proved that
process improvement method has yielded significant result in operations (Bateman,
2005). There are a variety of process improvement tools/technique such as Six Sigma,
Lean, Lean Six Sigma, Just-In-Time, Re-engineering, Design of Experiments, Total
Quality Management, and others (Gershon, 2010).
Process improvement in healthcare should not be neglected by the management
of healthcare organizations since inefficient and faulty of processes in healthcare are one
of the main causes that can lead practitioners to make technical mistakes (Rebuge &
Ferreira, 2012). In addition, Garland (2005) found that 15% of medical errors are due to
human error while the balance of 85% is the result of flaws in processes and the overall
healthcare system that obstructs individuals from performing their jobs. In other words,
processes involved are the contributing factors to quality and performance as they affect
the efficiency and outcomes of the entire system (Matthews, 2013). Lowe (2013) stated
that everyone should rethink the way they work and make inevitable changes as they go
on their daily tasks. Healthcare professionals will need a strategy or method to attain this
aim while maintaining or improving their current level of care.
2.3.1 Previous studies of process improvement in healthcare
Process improvement has been tremendously implemented in healthcare industry. Table
2.2 shows the summary of the studies on process improvement that had been done in
healthcare by previous scholars.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
22
Table 2.2: Previous studies of process improvement in healthcare
AUTHOR (YEAR) PROCESS
IMPROVEMENT DESCRIPTION
Taner, Sezen & Antony
(2007) Six Sigma
Minimize delays, measurement, and medical
errors.
Maximize resource utilization.
Increase patient and physician satisfaction.
Reduce cost.
Taner & Sezen (2009) Six Sigma Reduce turnover rate
Celano et al. (2012)
Six Sigma and discrete-
event simulation (DES)
Increase awareness among staff
Eliminate unnecessary activities
Reduce Six Sigma project cost when
adopting DES.
Southard et al. (2012)
Six Sigma and radio
frequency identification
(RFID) technology.
Time saving
Cost effectiveness
Improve safety of the patient
Gowen et al. (2012)
Continuous Quality
Improvement (CQI), Six
Sigma Initiatives (SSI),
and Lean Management
Initiatives (LMI)
CQI is the most effective PI approach
LMI offers some added benefits over and
above CQI.
CQI enhances patient safety
Hospitals report only a moderate level of SSI
implementation.
Liberatore (2013) Six Sigma
From study, only
67% had initial improvement in the key
process metric
10% reported sustained improvement.
28% reported cost savings
8% offered revenue enhancement.
Al-Balushi et al., (2014) Lean
Factors for implementing lean in healthcare:
culture of a healthcare setting
lean as a long-term policy
good measurement system
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
23
Table 2.2 (Continued)
AUTHOR (YEAR) PROCESS
IMPROVEMENT DESCRIPTION
Haron & Ramlan (2015) Lean
Reduce lead time and waste in process flow
of patient
Improve the capacity of patient, idle time,
utilized time and the number of operations
As mentioned in Table 2.2, process improvement method had been implemented
in healthcare since decades ago where it focuses on improving the quality of services in
healthcare. From the table, Six Sigma methodology had managed to minimize delays
and medical errors, eliminate unnecessary activities, reduce costs, time and turnover
rate, maximize resource utilization and awareness among staffs, and even increase
patient safety, give patient and physician satisfaction, and also the revenue (Taner et al.,
2007; Taner & Sezen, 2009; Celano et al., 2012; Southard et al., 2012; Gowen et al.,
2012; Liberatore, 2013).
In addition, one of the studies mentioned in Table 2.2 stated that lean
methodology had been implemented in healthcare due to the culture of healthcare
settings, lean as a long term policy, and also a good measurement system. Lean managed
to reduce the waste and lead time, and also improve the capacity of patient, idle time,
utilized time and operations in the healthcare (Al-Balushi et al., 2014; Haron & Ramlan,
2015).
2.3.2 Six Sigma
Six Sigma is one of the process improvement initiatives that was designed by leading
manufacturing companies and applied to service industry for managing better operation
system. Six Sigma started as an improvement programme at Motorola in 1982 in order
to assist Motorola to reduce costs and improve the quality of their product (Stamatis,
2003). Six Sigma is a systematic approach to problem solving. Six Sigma has been
described by previous researchers in different forms. These differences led to
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
24
uncertainty and confusion by others. In a study reviewed by Schroeder, Linderman,
Liedtke and Choo (2008), they had collected a few definitions of Six Sigma. The first
definition in the study defined that Six Sigma as a high-performance, data-driven
approach to analyse the root causes of business problems and solve them. The second
definition in the study defined Six Sigma as business process that allows companies to
drastically improve their bottom line by designing and monitoring everyday business
activities in ways that minimize waste and resources while increasing customer
satisfaction. The third definition from the study defined Six Sigma as a disciplined and
statistically based approach for improving product and process quality. The fourth
definition in the study stated Six Sigma as a management strategy that requires a culture
change in the organization (Schroeder et al., 2008).
Six Sigma definition by Gowen (2012) is known as a radical breakthrough
approach that is extensively focused on the bottom line results, specifically for process
improvement projects. However, Stamatis (2003) defined Six Sigma as a quality
objective that specifies the variability required of a process in terms of the specifications
of the product/service so that the reliability and the quality meet and exceed today’s
demanding customer requirements. Other definitions indicate Six Sigma as an
organized, parallel-mesostructure to reduce variation in organizational processes by
using improvement specialists, a structured method, and performance metrics with the
aim of achieving strategic objectives (Schroeder et al., 2008). Specifically, the term Six
Sigma refers to a process capability that generates 3.4 defects per million opportunities.
Descriptions that have been collected from previous researches suggest that Six Sigma
definitions covered almost all aspects. This is proven by a variation of definitions from
different practitioners and academic literatures.
Six Sigma plays an important role as one of the main process improvement tool
and has four main goals which are to reduce defects/non-conformance, improve yield,
for customer satisfaction and shareholder value (Stamatis, 2003). Six Sigma offers a
framework that gathers the basic quality tools and combines them with high-level
management support. A disciplined approach towards measurement and improvement
that have not been evident in previous quality improvement efforts are required by Six
Sigma. Besides that, Six Sigma also encourages customer-focused approach which at the
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
119
REFERENCES
Abdulmalek, F. A., & Rajgopal, J. (2007). Analyzing the benefits of lean manufacturing
and value stream mapping via simulation: A process sector case study.
International Journal of production economics, 107(1), 223-236.
Aboelmaged, G. M. (2010). Six Sigma quality: a structured review and implications for
future research. International Journal of Quality & Reliability Management,
27(3), 268-317.
Abor, P. A. (2013). Managing healthcare waste in Ghana: a comparative study of public
and private hospitals. International journal of health care quality
assurance, 26(4), 375-386.
Aguezzoul, A., & Nyoungue, A. (2012, July). A preliminary analysis on Lean Six Sigma
application in healthcare. In ICSSSM12 (pp. 714-717). IEEE.
Al-Aomar, R. (2012). A lean construction framework with Six Sigma rating.
International Journal of Lean Six Sigma, 3(4), 299-314.
Al-Balushi, S., Sohal, A. S., Singh, P. J., Al Hajri, A., Al Farsi, Y. M., & Al Abri, R.
(2014). Readiness factors for lean implementation in healthcare settings–a
literature review. Journal of health organization and management, 28(2), 135-
153.
Antony, J., Jiju Antony, F., Kumar, M., & Rae Cho, B. (2007). Six sigma in service
organisations: Benefits, challenges and difficulties, common myths, empirical
observations and success factors. International journal of quality & reliability
management, 24(3), 294-311.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
120
Antony, J., Krishnan, N., Cullen, D., & Kumar, M. (2012). Lean Six Sigma for higher
education institutions (HEIs) Challenges, barriers, success factors,
tools/techniques. International Journal of Productivity and Performance
Management, 61(8), 940-948.
Ari, V. R. (2010). Value Stream Mapping of Information Flow in Infrastructure Projects
(Doctoral dissertation, Cleveland State University).
Arumugam, V., Antony, J., & Douglas, A. (2012). Observation: a Lean tool for
improving the effectiveness of Lean Six Sigma. The TQM Journal, 24(3), 275-
287.
Bahensky, J. A., Roe, J., & Bolton, R. (2005). Lean sigma—will it work for healthcare.
J Healthc Inf Manag, 19(1), 39-44.
Bateman, N. (2005). Sustainability: the elusive element of process improvement.
International journal of operations & production management, 25(3), 261-276.
Ben-Tovim, D. I., Bassham, J. E., Bolch, D., Martin, M. A., Dougherty, M., &
Szwarcbord, M. (2007). Lean thinking across a hospital: redesigning care at the
Flinders Medical Centre. Australian Health Review, 31(1), 10-15.
Black, K., & Revere, L. (2006). Six Sigma arises from the ashes of TQM with a twist.
International Journal of Health Care Quality Assurance, 19(3), 259-266.
Burgess, T. F. (2001). A general introduction to the design of questionnaires for survey
research. UK: University of Leeds.
Cadro, T. (2013). Finalization of a lean manufacturing process within the customer
support service of Latécoère
Casey, J. J. W. (2007). A lean enterprise approach to process improvement in a health
care organization (Doctoral dissertation, Massachusetts Institute of Technology).
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
121
Castle, A., & Harvey, R. (2009). Lean information management: the use of
observational data in health care. International Journal of Productivity and
Performance Management, 58(3), 280-299.
Celano, G., Costa, A., Fichera, S., & Tringali, G. (2012). Linking Six Sigma to
simulation: a new roadmap to improve the quality of patient care. International
journal of health care quality assurance, 25(4), 254-273.
Cheong, H. J., Shin, N. Y., & Joeng, Y. B. (2009). Improving Korean service delivery
system in health care: Focusing on national E-health system. In eHealth,
Telemedicine, and Social Medicine, 2009. eTELEMED'09. International
Conference on (pp. 263-268).
Collis, J., Hussey, R., Crowther, D., Lancaster, G., Saunders, M., Lewis, P., & Robson,
C. (2003). Business research methods.
Cookson, D., Read, C., & Cooke, M. (2011). Improving the quality of Emergency
Department care by removing waste using Lean Value Stream mapping. The
international journal of clinical leadership, 17(1), 25-30.
Coons, J. A. Beginning the lean improvement journey in the clinical laboratory
Creswell, J. W., & Plano-Clark, V. L. (2006). Understanding mixed methods research.
Designing mixed methods research. California: Sage Publications.
Creswell, J. W. (2014). A concise introduction to mixed methods research. California:
Sage Publications.
Dahlgaard, J. J., Pettersen, J., & Dahlgaard-Park, S. M. (2011). Quality and lean health
care: A system for assessing and improving the health of healthcare
organisations. Total Quality Management & Business Excellence, 22(6), 673-
689.
De Mast, J. (2006). Six Sigma and competitive advantage. Total Quality Management
and Business Excellence, 17(04), 455-464.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
122
DelliFraine, J. L., Langabeer, J. R., & Nembhard, I. M. (2010). Assessing the evidence
of Six Sigma and Lean in the health care industry. Quality Management in
Healthcare, 19(3), 211-225.
Dickson, E. W., Anguelov, Z., Vetterick, D., Eller, A., & Singh, S. (2009). Use of lean
in the emergency department: a case series of 4 hospitals. Annals of emergency
medicine, 54(4), 504-510.
El-Haik, B. & Yang, K. "Design for Six Sigma, A Roadmap for Product Development."
(2003): 1-35.
Erfan, O. M. (2010). Application of lean manufacturing to improve the performance of
health care sector in Libya. International Journal of Engineering &
Technology, 10(6), 117-128.
Garbutt, J., Waterman, A. D., Kapp, J. M., Dunagan, W. C., Levinson, W., Fraser, V., &
Gallagher, T. H. (2008). Lost opportunities: how physicians communicate about
medical errors. Health Affairs, 27(1), 246-255.
Garland, A. (2005). Improving the ICUPart 2. CHEST Journal, 127(6), 2165-2179.
Gershon, M. (2010). Choosing which process improvement methodology to implement.
The Journal of Applied Business and Economics, 10(5), 61.
Gill, S. P. (2012). Application of value stream mapping to eliminate waste in an
emergency room. Global Journal of Medical Research, 12(6).
Goldstein, S. M., & Iossifova, A. R. (2012). Ten years after: Interference of hospital
slack in process performance benefits of quality practices. Journal of Operations
Management, 30(1), 44-54.
Gowen Iii, C. R., McFadden, K. L., & Settaluri, S. (2012). Contrasting continuous
quality improvement, Six Sigma, and lean management for enhanced outcomes
in US hospitals. American Journal of Business, 27(2), 133-153.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
123
Hadid, W., & Afshin Mansouri, S. (2014). The lean-performance relationship in
services: a theoretical model. International Journal of Operations & Production
Management, 34(6), 750-785.
Haron, S. H. A., & Ramlan, R. (2015). Patient Process Flow Improvement: Value
Stream Mapping. Journal of Management Research, 7(2), 495-505.
Haron, S. H. A., Ramlan, R., Ahmad, K., Ahmad, A. N. A., (2015).Value Stream
Mapping Implementation in Healthcare – A literature Review. Malaysian
Technical Universities Conference on Engineering and Technology 2015
(MUCET 2015). Paper presented at Malaysian Technical Universities
Conference on Engineering and Technology 2015 (MUCET 2015), Johor Bahru,
11-13 October 2015. Manuscript submitted for publication.
Hilton, R., Balla, M., & Sohal, A. S. (2008). Factors critical to the success of a Six-
Sigma quality program in an Australian hospital. Total Quality
Management,19(9), 887-902.
Holden, R. J. (2011). Lean thinking in emergency departments: a critical review. Annals
of emergency medicine, 57(3), 265-278.
Jenkins, J. (2006). Eliminating common PACU delays. Journal of healthcare
information management: JHIM, 21(2), 53-58.
Jimmerson, C., Weber, D., & Sobek, D. K. (2005). Reducing waste and errors: piloting
lean principles at Intermountain Healthcare. Joint Commission Journal on
Quality and Patient Safety, 31(5), 249-257.
Joosten, T., Bongers, I., & Janssen, R. (2009). Application of lean thinking to health
care: issues and observations. International Journal for Quality in Health Care,
21(5), 341-347.
Kamma, T. K. (2010). Framework for lean thinking approach to healthcare
organizations: Value stream mapping to reduce patient waiting time.
SOUTHERN ILLINOIS UNIVERSITY AT CARBONDALE.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
124
Khaidir, N. A., Habidin, N. F., Ali, N., Shazali, N. A., & Jamaluddin, N. H. (2013). Six
Sigma practices and organizational performance in Malaysian healthcare
industry. IOSR Journal of Business and Management, 6(5), 29-37.
Koelling, C. P., Eitel, D., Mahapatra, S., Messner, K., & Grove, L. (2005). Value stream
mapping the emergency department. Grado Department of Industrial and
Systems Engineering, Virginia Tech. Blacksburg, VA.
Kollberg, B., Dahlgaard, J. J., & Brehmer, P. O. (2006). Measuring lean initiatives in
health care services: issues and findings. International Journal of Productivity
and Performance Management, 56(1), 7-24.
Kothari, C. R. (2004). Research methodology: methods and techniques. New Delhi:
New Age International.
Kumar, S., & Steinebach, M. (2008). Eliminating US hospital medical errors.
International journal of health care quality assurance, 21(5), 444-471.
Langabeer, J. R., DelliFraine, J. L., Heineke, J., & Abbass, I. (2009). Implementation of
Lean and Six Sigma quality initiatives in hospitals: A goal theoretic perspective.
Operations Management Research, 2(1-4), 13-27.
Laureani, A., & Antony, J. (2012). Critical success factors for the effective
implementation of lean sigma: results from an empirical study and agenda for
future research. International Journal of Lean Six Sigma, 3(4), 274-283.
Lee, P. M., Khong, P., & Ghista, D. N. (2006). Impact of deficient healthcare service
quality. The TQM Magazine, 18(6), 563-571.
Lewis, P., Thornhill, A., & Saunders, M. (2007). Research methods for business
students. Pearson Education UK.
Liberatore, M. J. (2013). Six Sigma in healthcare delivery. International journal of
health care quality assurance, 26(7), 601-626.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
125
Lighter, D. (2011). Basics of health care performance improvement. Burlington: Jones
& Bartlett Publishers.
Llyod, D. H., and Holsenback, J. E. (2006). The use of six sigma in health care
operations: Application and opportunity. Academy of Health Care Management
Journal, 2, 41-49
Lowe, F. R. (2013). Lean Healthcare: Controlling Cost through Better Care (Doctoral
dissertation, University of Minnesota).
Lummus, R. R., Vokurka, R. J., & Rodeghiero, B. (2006). Improving quality through
value stream mapping: a case study of a physician's clinic. Total Quality
Management, 17(8), 1063-1075.
Malaysia. Economic Planning Unit. (2010). Tenth Malaysia Plan 2011-2015. Putrajaya:
The Economic Planning Unit, Prime Minister's Department
Mark, S., Philip, L., & Adrian, T. (2009). Research methods for business students.
Harlow: Prentice Hall.
Marley, K. A., Collier, D. A., & Meyer Goldstein, S. (2004). The role of clinical and
process quality in achieving patient satisfaction in hospitals. Decision
Sciences, 35(3), 349-369.
Mathey, A. (2012). An application of the Value Stream Mapping method in order to
identify sources of wastes and opportunities for improvements.
Matthews, L. (2013). Process mining to facilitate process improvement in a healthcare
environment: An emergency department case study (Doctoral dissertation,
STATE UNIVERSITY OF NEW YORK AT BINGHAMTON).
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
126
Mazzocato, P., Savage, C., Brommels, M., Aronsson, H., & Thor, J. (2010). Lean
thinking in healthcare: a realist review of the literature. Quality and Safety in
Health Care, 19(5), 376-382.
McClean, S., Young, T., Bustard, D., Millard, P., & Barton, M. (2008, September).
Discovery of value streams for Lean Healthcare. In Intelligent Systems, 2008.
IS'08. 4th International IEEE Conference (Vol. 1, pp. 3-2).
Melton, T. (2005). The benefits of lean manufacturing: what lean thinking has to offer
the process industries. Chemical Engineering Research and Design, 83(6), 662-
673.
MoF. 2014. Guide Healthcare Services. Retrieved 27 January 2015 from
http://www.customs.gov.my/ms/pg/pg_ig/Healthcare%20Services%20(revised%
20as%20at%2019%20November%202014).pdf
MoH. (2010). Country health plan 2011-2015. Retrieved 05 January 2014 from
www.moh.gov.my/images/gallery/Report/Country_health.pdf
MoH. (2013). Bajet 2014 Impak dan Faedah. Retrieved 27 January 2015 from
http://www.penerangan.gov.my/index.php/bm/penerbitan/dbook
MoH. (2015). Health Facts 2014. Retrieved 20 May 2015 from
http://www.moh.gov.my/images/gallery/publications/HEALTH%20FACTS%20
2014.pdf
Mujtaba, S., Feldt, R., & Petersen, K. (2010, April). Waste and lead time reduction in a
software product customization process with value stream maps. In 2010 21st
australian software engineering conference (pp. 139-148). IEEE.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
127
Murrell, K. L., Offerman, S. R., & Kauffman, M. B. (2011). Applying lean:
implementation of a rapid triage and treatment system. Western Journal of
Emergency Medicine, 12(2), 184.
Nash, M. A., & Poling, S. R. (2011). Mapping the total value stream: A comprehensive
guide for production and transactional processes. New York: CRC Press.
Nelson-Peterson, D. L., & Leppa, C. J. (2007). Creating an environment for caring using
lean principles of the Virginia Mason Production System. Journal of nursing
administration, 37(6), 287-294.
Nielsen, A. (2008). Getting Started with Value Stream Mapping. Salt Spring Island:
Gardiner Nielsen Associated Inc.
Olszak, C. M., & Batko, K. (2012). The use of business intelligence systems in
healthcare organizations in Poland. In Computer Science and Information
Systems (FedCSIS), 2012 Federated Conference on (pp. 969-976). IEEE.
Padma, P., Rajendran, C., & Sai, L. P. (2009). A conceptual framework of service
quality in healthcare: perspectives of Indian patients and their attendants.
Benchmarking: An International Journal, 16(2), 157-191.
Pate, D. C., & Puffe, M. (2007). Improving patient flow. Physician executive,33(3), 32.
Pepper, M. P. J., & Spedding, T. A. (2010). The evolution of lean Six
Sigma.International Journal of Quality & Reliability Management, 27(2), 138-
155.
Persoon, T. J., Zaleski, S., & Frerichs, J. (2006). Improving preanalytic processes using
the principles of lean production (Toyota Production System).American journal
of clinical pathology, 125(1), 16-25.
Pluto, D. M., & Hirshorn, B. A. (2003). Process mapping as a tool for home health
network analysis. Home health care services quarterly, 22(2), 1-16.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
128
Puterman, M. L., Zhang, Y., Aydede, S. K., Palmer, B., MacLeod, S., Bavafa, H., &
MacKenzie, J. (2012). ―If You’re Not Keeping Score, You’re Just Practicing”: A
Lean Health Care Program Evaluation Framework. Healthcare quarterly
(Toronto, Ont.), 16(2), 23-30.
Radnor, Z. J., Holweg, M., & Waring, J. (2012). Lean in healthcare: the unfilled
promise?. Social science & medicine, 74(3), 364-371.
Rahani, A. R., & al-Ashraf, M. (2012). Production flow analysis through value stream
mapping: a lean manufacturing process case study. Procedia Engineering, 41,
1727-1734.
Ramlan, R., Ismail, S. N., Kassim, N. A., (2010). Aplikasi Promodel Dalam Mengkaji
Masa Menunggu Rawatan Di Klinik. Prosiding Seminar Kebangsaan Aplikasi
Sains dan Matematik 2010 (SKASM 2010). Paper presented at Simposium
Kebangsaan Sains Matematik ke-18 (SKSM 18), Johor Bahru, Johor, 8-10
December 2010 (pp. 169-175). Batu Pahat, Johor: Penerbit Universiti Tun
Hussein Onn Malaysia
Rebuge, Á., & Ferreira, D. R. (2012). Business process analysis in healthcare
environments: A methodology based on process mining. Information Systems,
37(2), 99-116.
Revere, L., Black, K., & Huq, A. (2004). Integrating Six Sigma and CQI for improving
patient care. The TQM Magazine, 16(2), 105-113.
Robson, C. (2002). Real world research. 2nd. Edition. Malden: Blackwell Publishing.
Rohana, A., Nooririnah, O., Isa, H., Kamat, S., & Mehad, M. (2013) Lean Waste
Analysis and Improvement Using Dynamic Value Stream Mapping. Global
Engineers and Technologists Review, 3, 1-8.
Rohini, R., & Mallikarjun, J. (2011). Six Sigma: Improving the Quality of Operation
Theatre. Procedia-Social and Behavioral Sciences, 25, 273-280.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
129
Roscoe, J.T. (1975) Fundamental Research Statistics for the Behavioural Sciences, 2nd
edition. New York: Holt Rinehart & Winston.
Rother, M., & Shook, J. (2003). Learning to see: value stream mapping to add value
and eliminate muda. Cambridge: Lean Enterprise Institute.
Saunders, M., Lewis, P., & Thornhill, A. (2009). Research methods for business
students, 5/e. England: Pearson Education.
Schonberger, R. J. (2008). World class manufacturing. New York: The Free Press.
Schroeder, R. G., Linderman, K., Liedtke, C., & Choo, A. S. (2008). Six Sigma:
definition and underlying theory. Journal of operations Management, 26(4), 536-
554.
Shahrbabaki, S. A. D., & Jackson, M. (2011). Green and lean production visualization
tools; a case study exploring EVSM. Kersten W International supply chain
management and collaboration practices, Josef Eul Verlag, Lohmar Köln, 399-
412.
Shazali, N. A., Habidin, N. F., Ali, N., Khaidir, N. A., & Jamaludin, N. H. (2013). Lean
Healthcare Practice and Healthcare Performance in Malaysian Healthcare
Industry. International Journal of Scientific and Research Publications, 3(1), 1-
5.
Sobek II, D. K., & Jimmerson, C. (2003, January). Applying the Toyota Production
System to a Hospital Pharmacy. In IIE Annual Conference. Proceedings (p. 1).
Institute of Industrial Engineers-Publisher.
Southard, P. B., Chandra, C., & Kumar, S. (2012). RFID in healthcare: a Six Sigma
DMAIC and simulation case study. International Journal of Health Care Quality
Assurance, 25(4), 291-321.
Spear, S. J. (2005). Fixing health care from the inside, today. Harvard business
review, 83(9), 78.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
130
Stamatis, D. H. (2003). Six Sigma for financial professionals. Indiana University: John
Wiley & Sons.
Stone, K. B. (2012). Four decades of lean: a systematic literature review.International
Journal of Lean Six Sigma, 3(2), 112-132.
Taiichi, O. (1988). Toyota production system: Beyond large-scale production.
Productivitiy Pres, Cambridge, MA.
Taner, M. T., Sezen, B., & Antony, J. (2007). An overview of six sigma applications in
healthcare industry. International Journal of Health Care Quality Assurance,
20(4), 329-340.
Taner, M. T., & Sezen, B. (2009). An application of Six Sigma methodology to turnover
intentions in health care. International Journal of Health Care Quality
Assurance, 22(3), 252-265.
Teichgräber, U. K., & de Bucourt, M. (2012). Applying value stream mapping
techniques to eliminate non-value-added waste for the procurement of
endovascular stents. European journal of radiology, 81(1), e47-e52.
Towill, D. R., & Christopher, M. (2005). An evolutionary approach to the architecture of
effective healthcare delivery systems. Journal of Health Organization and
Management, 19(2), 130-147.
Trusko, B. E., Pexton, C., Gupta, P. K., & Harrington, J. (2003). Improving healthcare
quality and cost with Six Sigma. Pearson Education.
Tsasis, P., & Bruce-Barrett, C. (2008). Organizational change through lean
thinking. Health Services Management Research, 21(3), 192-198.
Tyagi, S., Choudhary, A., Cai, X., & Yang, K. (2015). Value stream mapping to reduce
the lead-time of a product development process. International Journal of
Production Economics, 160, 202-212.
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH
131
Wan, H. D., & Frank Chen, F. (2008). A leanness measure of manufacturing systems for
quantifying impacts of lean initiatives. International Journal of Production
Research, 46(23), 6567-6584.
Willoughby, K. A.,Chan, B. T. B., & Strenger, M. (2010). Achieving wait time
reduction in the emergency department. Leadership in Health Services, 23(4),
304-319.
Womack, J. P., & Jones, D. T. (2010). Lean thinking: banish waste and create wealth in
your corporation. London: Simon and Schuster.
Yang, K., & El-Haik, B. S. (2003). Design for Six Sigma (pp. 184-186). New York:
McGraw-Hill
Yusoff, M. S. B. (2015) retrieved from https://www.scribd.com/document/47700170/Dr-
Saiful-s-Notes-on-Medical-26-Allied-Health-Education-Statistics-26-Research-
Methodology
PTTAPERP
USTAKAAN TUNKU T
UN AMINAH